Добірка наукової літератури з теми "Wall modeling for ibm"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Wall modeling for ibm".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Wall modeling for ibm"
Auguste, Franck, Géraldine Réa, Roberto Paoli, Christine Lac, Valery Masson, and Daniel Cariolle. "Implementation of an immersed boundary method in the Meso-NH v5.2 model: applications to an idealized urban environment." Geoscientific Model Development 12, no. 6 (July 1, 2019): 2607–33. http://dx.doi.org/10.5194/gmd-12-2607-2019.
Повний текст джерелаRATHISH KUMAR, B. V., S. K. PATHAK, VIVEK SANGWAN, MOHIT NIGAM, and S. K. MURTHY. "A NUMERICAL SIMULATION OF CARDIAC ELECTRIC ACTIVITY IN LV BASED ON MONO-DOMAIN MODEL." Journal of Mechanics in Medicine and Biology 10, no. 03 (September 2010): 431–44. http://dx.doi.org/10.1142/s0219519410003538.
Повний текст джерелаWang, Sitong, Ting Ye, Guansheng Li, Xuejiao Zhang, and Huixin Shi. "Margination and adhesion dynamics of tumor cells in a real microvascular network." PLOS Computational Biology 17, no. 2 (February 19, 2021): e1008746. http://dx.doi.org/10.1371/journal.pcbi.1008746.
Повний текст джерелаXu, Yuan, Zhonghua Huang, Shize Yang, Zhiqi Wang, Bing Yang, and Yinlin Li. "Modeling and Characterization of Capacitive Coupling Intrabody Communication in an In-Vehicle Scenario." Sensors 19, no. 19 (October 4, 2019): 4305. http://dx.doi.org/10.3390/s19194305.
Повний текст джерелаIzard, Edouard, Thomas Bonometti, and Laurent Lacaze. "Modelling the dynamics of a sphere approaching and bouncing on a wall in a viscous fluid." Journal of Fluid Mechanics 747 (April 17, 2014): 422–46. http://dx.doi.org/10.1017/jfm.2014.145.
Повний текст джерелаAdamovich, H. Y., D. B. Nizheharodava, V. K. Shadryna, A. G. Dybau, A. M. Starastsin, T. E. Vladimirskaya, A. U. Varabei, and M. М. Zafranskayа. "Immunomodulatory effect of cell therapy on the experimental inflammatory bowel disease model." Proceedings of the National Academy of Sciences of Belarus, Medical series 18, no. 2 (June 4, 2021): 177–85. http://dx.doi.org/10.29235/1814-6023-2021-18-2-177-185.
Повний текст джерелаRaghavan, R., R. J. Eickemeyer, A. C. Sawdey, J. B. Griswell, D. Parikh, S. Ramani, D. M. Daly, et al. "IBM POWER8 performance and energy modeling." IBM Journal of Research and Development 59, no. 1 (January 2015): 10:1–10:10. http://dx.doi.org/10.1147/jrd.2014.2380201.
Повний текст джерелаLiu, Xing. "Multilevel and longitudinal modeling with IBM SPSS." International Journal of Research & Method in Education 34, no. 2 (July 2011): 211–13. http://dx.doi.org/10.1080/1743727x.2011.573269.
Повний текст джерелаSrinivas, M., B. Sinharoy, R. J. Eickemeyer, R. Raghavan, S. Kunkel, T. Chen, W. Maron, et al. "IBM POWER7 performance modeling, verification, and evaluation." IBM Journal of Research and Development 55, no. 3 (May 2011): 4:1–4:19. http://dx.doi.org/10.1147/jrd.2011.2147170.
Повний текст джерелаSucci, S. "Cellular automata modeling on IBM 3090/VF." Computer Physics Communications 47, no. 2-3 (November 1987): 173–80. http://dx.doi.org/10.1016/0010-4655(87)90103-2.
Повний текст джерелаДисертації з теми "Wall modeling for ibm"
Roman, Federico. "Large eddy simulation tool for environmental and industrial processes." Doctoral thesis, Università degli studi di Trieste, 2009. http://hdl.handle.net/10077/3210.
Повний текст джерелаComputational Fluid Dynamics (CFD) is an established tool for consulting and for basic research in fluid mechanics. CFD is required to provide information where analytical approaches or experiments would be impossible or too expensive. Most of the flows of engineering interest are turbulent. Turbulence is an unresolved problem of classical physics, because of the non linearity of the fluid motion equations. At the moment the only way to face them is numerically. Turbulence is composed of eddies in a broad range of size. To solve numerically the Navier-Stokes equations, the equations set that governs the fluid motion, a very fine grid is necessary in order to catch also the smallest eddies. The computational cost increases as Re3 (Re = ul/ is the Reynolds number with u and l an inertial velocity and length scales and the kinematic viscosity). Real life problems are characterized by very large Reynolds numbers and the consequent computational cost is enormous. So the direct solutions of Navier-Stokes equations (DNS) is not feasible. In many applications it is not necessary to solve all the eddies, it can be sufficient to supply the effects of unresolved scale to the flow. In Large Eddy Simulation (LES) most of the scales of motion are directly solved, in particular all the large energy carrying scales. These scales are influenced by the boundaries and they are strongly anisotropic. The smaller and dissipative scales must be modeled, but these scales loosing memory of the boundary conditions are more isotropic and hence formulating a general model that accounts for their effect is relatively easier. Large Eddy Simulation is a prospective tool for investigation in real life problems, in particular when high detailed analysis is required. This is the case for many industrial and environmental processes. For example, acoustic problems due to hydrodynamic noise are governed over a range of large scales which are easily reproduced by LES solution. However in these types of flows many difficulties arise also for LES. In general these flows are characterized by high Reynolds number. Wall-bounded flow at high Re requires high computational cost because LES is constrained to be DNS-like. Besides complex geometries are often involved. Structured or Unstructured body-fitted grid can be very hard to made, moreover unstructured grid can be expensive and not suited for LES. Scope of this thesis is to develop tools to apply LES to such configurations in order to make numerical simulation more adaptable to real life problems. In particular to deal with complex geometry an Immersed Boundary Methodology has been developed for curvilinear coordinates. The method has been applied to several test cases with good results. Then this methodology has been extended to high Reynolds number flows through the use of a wall model. In order to work on anisotropic grid, typical in sea coastal domain, a modified Smagorisky model has been proposed. Finally particle dispersion has been considered in stratified environmental flow. These tools has been applied to an industrial and to an environmental problem with good results.
La fluidodinamica computazionale (CFD) ´e uno strumento affermato per le consulenze e per la ricerca di base nella meccanica dei fluidi. Alla CFD ´e richiesto di fornire informazioni quando approcci analitici o sperimentali sarebbero impossibili o troppo costosi. La maggior parte dei flussi di interesse ingegneristico ´e di tipo turbolento. La turbolenza ´e uno dei problemi irrisolti della fisica classica, ci´o ´e dovuto alla non linearit´a delle equazioni che governano il moto dei fluidi. Al momento l’unico modo per affrontarle ´e numericamente. La turbolenza si compone di vortici di diverse dimensioni. Per risolvere numericamente le equazioni di Navier-Stokes, le equazioni che governano il moto dei fluidi, una griglia molto fine ´e necessaria al fine di simulare propriamente anche i vortici di scala pi´u piccola. Il costo computazionale cresce come Re3 (Re = ul/ ´e il numero di Reynolds, con u e l una velocit´a ed una lunghezza scala caratteristici e la viscosit´a cinematica). I problemi reali sono caratterizzati da numeri di Reynolds altissimi e conseguentemente il costo computazionale di queste simulazioni ´e enorme. Per questo motivo la soluzione diretta delle equazioni di Navier-Stokes (DNS) non ´e possibile. In molte applicazioni non ´e necessario risolvere tutte le scale dei vortici, pu´o essere sufficiente fornire l’effetto delle scale non risolte al flusso. Nella Large Eddy Simulation gran parte delle scale di vortici ´e direttamente risolta, in particolare le larghe scale energetiche. Queste scale sono influenzate dalle condizioni al contorno e sono fortemente anisotrope. Le scale piccole e dissipative devono essere modellate, ma queste scale perdendo memoria delle condizioni al contorno sono generalmente isotrope ed un modello per riprodurre il loro effetto risulta semplice. La LES ´e uno strumento d’avanguardia per lo studio di flussi realistici, in particolare risulta molto potente quando vengono richieste analisi dettagliate del moto. Questo ´e il caso di molti problemi in campo industriale ed ambientale. Per esempio problemi acustici dovuti a rumore idrodinamico sono governati dalle grandi scale che nella LES sono facilmente riprodotte. Comunque anche per la LES sorgono molte difficolt´a nel affrontare questi problemi. Generalmente questi flussi sono caratterizzati da alti numeri di Reynolds. Flussi di parete ad alti Re richiedono un costo computazionale elevatissimo e alla fine la LES deve soddisfare a requisiti tipici della DNS. Inoltre spesso questi flussi sono caratterizzati da geometrie complesse. Griglie strutturate o non strutturate che si adattano alle geometrie possono essere molto difficili da sviluppare, inoltre le griglie non strutturate possono essere molto costose e non particolarmente adatte alla LES. Lo scopo di questa tesi ´e di sviluppare degli strumenti atti a rendere efficiente l’applicazione della LES a flussi realistici. In particolare per affrontare le geometrie complesse ´e stata sviluppata una metodologia Immersed Boundary per coordinate curvilinee. Il metodo ´e stato provato su diversi casi con buoni risultati. La metodologia ´e stata quindi estesa al caso di flussi ad alto numero di Reynolds tramite lo sviluppo di un modello parete. ´E stato quindi sviluppato un modello modificato di Smagorinsky per lavorare con griglie fortemente anisotrope, tipiche per flussi in ambito marino costiero. Infine ´e stata studiata la dispersione di particelle in flussi ambientali stratificati. Gli strumenti sviluppati sono stati quindi applicati ad un problema industriale ed ad uno ambientale con ottimi risultati.
XXI Ciclo
1976
PASINATO, HUGO DARIO. "TURBULENCE IN WALL REGION MODELING." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1998. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=19290@1.
Повний текст джерелаNeste trabalho são apresentados de uma pesquisa orientada à modelagem da turbulência de baixos números de Reynolds. Com esse objetivo foi caracterizado o escoamento turbulento de baixos números de Reynolds na região viscosa vizinha a uma parede, na base de dados experimentais e correlação empírica. Sobre essa caracterização foi feita uma análise dos valores médios de interesse para modelos de turbulência de duas equações, a qual permitiu obter conclusões sobre o comportamento da turbulência de baixos Reynolds e propor modelos para a mesma. Essa modelagem implica em fornecer um fechamento para a equação de dissipação de energia cinética turbulenta e uma expressão para a viscosidade efetiva da turbulência, na região viscosa. O fechamento da equação de dissipação foi feito analisando os termos fontes de vorticidade, usando resultados prévios da ordem de grandeza relativa dos mesmos. A equação de dissipação obtida desse modo não contém funções de amortecimento. Com relação à expressão proposta para calcular a viscosidade efetiva de turbulência, considera-se que a transferência de quantidade de movimento devido à turbulência pode ser obtida em função da energia cinética do escoamento médio. Considera-se que a modelagem proposta é uma complementação para modelos de turbulência de duas equações, para simular zonas de baixos Reynolds incluídos os casos em sub-camada logarítmica aparente. Problemas de escoamentos turbulentos com cisalhamento médio com diferentes características, usualmente utilizadas para avaliar modelos de turbulência, foram usados como testes. Como resultados relevantes desta pesquisa, considera-se o fato de se usar em forma sistemática informação experimental para o desenvolvimento de modelos de turbulência, a obtenção de um fechamento para a equação de dissipação sem funções de amortecimento e uma expressão para a viscosidade da turbulência na região viscosa. No caso da viscosidade da turbulência, a expressão proposta permite obter a distribuição da velocidade média na região amortecedora, apresentando boa concordância com dados experimentais.
This thesis presents the results of research work aiming at low Reynolds turbulence modeling. For an stablished boundary layer turbulent low Reynolds flow in the viscous layer near a wall was characterized based on experimental data and empirical polynomials. On this basis an analysis of the distribuition of the mean values in the near-wall region was performed allowing for the proposal of a low Reynolds turbulence model within a two-equation model methodolgy. The low Reynolds proposal involves a closure to the dissipation equation and the proposal of an effective turbulence viscosity expression. The dissipation equation closure like as the effective viscosity proposal were made based on previous results of scale time rate analysis through the viscous region. On the other hand, the effective turbulence viscosity expression allows for the representation of the Reynolds stress as a function of mean flow kinetic energy. The low Reynolds turbulence modeling proposal can be seen as a complementation of two eqaution models for low Reynolds turbulence. The model was tested in several case tests of turbulent flow with different kind of mean shear, frequently used for turbulence model assessment. As main results of this work can be mentioned the systematic use of experimental data to build, analyze and test turbulence models; the closure of the dissipation equation without damping functions and the turbulence effective viscosity expression for the viscous region. This last proposed relation allows for the attainment of a mean velocity distribuition profile in the buffer region, which adequately fits experimental data.
Lubchenko, Nazar. "Near-wall modeling of bubbly flows." Thesis, Massachusetts Institute of Technology, 2018. https://hdl.handle.net/1721.1/121709.
Повний текст джерелаThesis: Ph. D., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, 2018
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 119-127).
Multiphase computational fluid dynamics (M-CFD) codes are gaining acceptance in the nuclear industry for the prediction of thermal-hydraulic behavior, offering the potential to improve the operation, economics, and safety of current systems, and enhance the design of next generation reactors. The common approach when applying M-CFD methods to the bubbly flow regime is to use an Eulerian-Eulerian two-fluid model, which solves for averaged mass and momentum equations for liquid and gas phases, as well as the k-epsilon turbulence model with modifications to account for the presence of bubbles. The resulting partial differential equations require well-posed boundary conditions, with special treatment at the walls, where there exist strong gradients of all variables. The present work systematically addresses the boundary conditions at solid walls for turbulent bubbly flows.
The complete coupled problem involving six variables is decoupled into three separate tasks, which consider void fraction profile, turbulent quantities, and gas velocity near the wall. Based on available experimental data it is shown that the reduction in void fraction near the wall is a consequence of the bubble shape, and not the wall lubrication effect repelling bubbles from the wall. Aiming at restoring the correct profile, a new wall force is derived from consideration of the interfacial forces balance near the wall. Its performance is evaluated through simulations of bubbly pipe flow experiments, confirming its improvements when compared to previous models. Three phenomena, namely, bubble-induced turbulence, buoyancy of gas, and displacement of liquid by gas, are speculated to have effect on the near-wall turbulent boundary layer.
These effects are incorporated in the Analytical Wall Functions (AWF), which provide quantitative treatment of these bubble effects in the boundary layer. The boundary layer model is validated on the existing experimental data, and the AWF are assessed based on simulations of bubbly pipe flow experiments, as well as at the prototypical reactor conditions. It is demonstrated that most of the effects that arise due to bubbles in the boundary layer can be neglected, and consequently, single phase wall functions can be used in numerical simulations. Finally, through analysis of experimental data, it is suggested that the relative velocity between bubbles and the surrounding liquid does not remain constant throughout the domain in the Eulerian-Eulerian representation of the flow, but instead increases near the wall. A corresponding correction to the drag coefficient is proposed and validated against the experimental data.
by Nazar Lubchenko.
Ph. D.
Ph.D. Massachusetts Institute of Technology, Department of Nuclear Science and Engineering
Calafell, Sandiumenge Joan. "Efficient wall modeling for large eddy simulations of general non-equilibrium wall-bounded flows." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/667230.
Повний текст джерелаEl principal objectiu d’aquesta tesi ha estat contribuir al desenvolupament de metodologies relacionades amb wall modeling aplicat a Large Eddy Simulations (LES) de fluxos de paret, especialment per a números de Reynolds alts. Aquesta configuració de flux es troba en un ampli número d’aplicacions industrials. Tot i això, donada la naturalesa de les capes límit, la resolució numèrica acurada d’aquest tipus de flux de manera rutinària és inviable. La tècnica de wall modeling pretén reproduir els efectes de la capa límit interna sense necessitat de resoldre-la explícitament. Això permet la resolució de fluxos de paret a alts números de Reynolds amb una fracció del cost que tindria si la capa límit interna fos resolta tant des d’un punt de vista espacial com temporal. Aquest treball està format per sis capítols. El primer és una introducció a la dinàmica de fluids computacional (CFD en les seves sigles en anglès), des de les metodologies més acurades i generals, fins a les tècniques més específiques i simplificades. Al segon capítol s’introdueixen les magnituds físiques rellevants que s’han d’analitzar per a avaluar i confirmar la fiabilitat d’una determinada simulació numèrica CFD d’alta fidelitat. Es consideren tant els aspectes espacials com temporals, els quals són fonamentals per a la correcta resolució d’un flux turbulent. Al tercer capítol es presenta un model de paret Two-Layer per a fluxos de no-equilibri i geometries complexes. Els models wall shear stress en general i els models basats en RANS en particular, estan afectats per els problemes de “log-layer mismatch” i “resolved Reynolds stresses inflow”, que deterioren la qualitat de les prediccions numèriques. El model proposat incorpora un filtre temporal a la interfície entre el model de paret i el domini LES, el qual suprimeix els dos errors comentats prèviament amb un sol pas de baix cost computacional. Fins ara, la eliminació d’aquests dos errors es duia a terme amb tècniques separades que en alguns casos eren complexes i costoses des d’un punt de vista computacional. A més a més, es proposa una metodologia per a la determinació de la longitud de filtre temporal òptima, la qual és validada tant en condicions d’equilibri com de no-equilibri. La nova tècnica està basada en l’obtenció de l’espectre de freqüències de la velocitat, el qual revela les característiques de les escales temporals del flux en la regió propera a la paret. Segons els resultats obtinguts en els tests, es conclou que per als models Two-Layer basats en RANS, les freqüències més altes que el límit entre el rangs energy-containing i inercial, s’han de filtrar. En el capítol quatre es presenta el model matemàtic del Two-Layer model basat en les equacions URANS. A més a més, es detalla la metodologia numèrica utilitzada per a la seva resolució a través del mètode dels volums finits. Al capítol cinc es presenta la implementació del model numèric presentat al capítol quatre. El model desenvolupat en aquesta tesi és un solver de CFD complert basat en les equacions URANS. Donat que el principal objectiu del wall modeling és la reducció de costos computacionals, és necessària una implementació eficient del model. És per això que la eficiència paral·lela del codi implementat s’analitza a través d’un strong scalability test. En aquestes proves es determina el bon comportament del codi, encara que s’identifiquen punts en els que es pot optimitzar la implementació actual. Finalment, a l’últim capítol es presenten les conclusions generals del treball. A més a més, s’hi inclouen un seguit de propostes sobre futures línies de recerca dirigides aprofundir en les conclusions obtingudes durant la realització del present estudi.
Krank, Benjamin [Verfasser], Wolfgang A. [Akademischer Betreuer] Wall, Wolfgang A. [Gutachter] Wall, and Claus-Dieter [Gutachter] Munz. "Wall Modeling via Function Enrichment for Computational Fluid Dynamics / Benjamin Krank ; Gutachter: Wolfgang A. Wall, Claus-Dieter Munz ; Betreuer: Wolfgang A. Wall." München : Universitätsbibliothek der TU München, 2019. http://d-nb.info/1180602099/34.
Повний текст джерелаPajayakrit, Palanunt. "Turbulence modeling for curved wall jets under adverse pressure gradient." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ26861.pdf.
Повний текст джерелаKamel, Sherif I. (Sherif Ibrahim). "Mathematical modeling of wet flashover mechanism of HVDC wall bushings." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28792.
Повний текст джерелаThe random processes associated with the wetting dynamics and pattern as well as the air gaps breakdowns are accounted for in a novel statistical approach to model the flashover process of the HVDC wall bushings under the proposed mechanism.
The work is supported by an experimental investigation into surface resistance and minimum flashover stress of full scale HVDC wall bushings under nonuniform rain.
The findings of the model have been satisfactorily compared with experiments and field observations and can for the first time account for the following aspects of flashover mechanism: critical dry zone length, polarity effect, specific leakage length, wet layer conductance, dry zone position as well as DC system voltage. The model was also used to assess the performance of RTV coated bushings and to compare the strength or an SF$ sb6$ bushing to that of a conventional oil-paper design under nonuniform rain.
Pajayakrit, Palanunt Carleton University Dissertation Engineering Mechanical and Aerospace. "Turbulence modeling for curved wall jets under adverse pressure gradient." Ottawa, 1997.
Знайти повний текст джерелаMensah-Gourmel, Johanne. "Modeling biodegradable stents and their effect on the arterial wall." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLX034/document.
Повний текст джерелаToday, sent deployment is the most common treatment for symptomatic atherosclerosis. Bioresorbable stents (BRS) are based on the premise that a stent is needed only until arterial wound healing occurs after which it would be desirable for the stent to degrade so that the arterial wall recovers its natural compliance. Deployment of a stent profoundly alters the mechanical environment in the arterial wall, and these alterations play an important role in regulating the incidence of complications such as restenosis and neointimal hyperplasia. In the case of a BRS, the mechanical stresses in both the stent and the arterial wall evolve as the stent degrades. Furthermore, the hydrolysis-driven degradation of the stent can be accelerated by mechanical stresses in the stent, an additional coupling that needs to be taken into account. We are interested in determining the evolution of stresses in both the stent and the arterial wall during the stent deployment and degradation process and in elucidating the effect of these stresses on the stent degradation and on the remodeling process in the wall, which would also be influenced by the loss of endothelial cells and the amount of inflammation induced by the stent deployment and degradation. To this end, we have developed a 3D finite element model of the deployment and degradation of a polylactic acid (PLA) BRS that integrates the coupling between the stent and the artery.This allows one to predict the zones of dismantling of the stent and the evolution of the arterial thickness in response to a BRS stenting procedure. Since the model relies strongly on parameters that need to be determined experimentally, we became interested in developing methods to follow stent degradation. With this aim, we used optical coherence tomography (OCT) to image several BRS that were deployed into tubes and allowed to degrade in a saline solution at 37°C over a period of two years. We subsequently developed a versatile method for automatically detecting stent struts on the OCT images and quantifying the strut gray scale intensity. The results suggest that this automated method of OCT image analysis represents a promising tool to quantitatively assessing BRS degradation states. Lastly, we were interested in establishing the ability of a stented artery to adapt to a modification in its wall shear stress. Studying the in vivo evolution of the lumen of stented mini-swine arteries followed by OCT imaging allowed us to demonstrate that whereas a bare metal stent cages the artery, a BRS, presumably due to its degradation-induced dismantling, frees the vessel and enables it to adapt its lumen diameter in order to decrease its absolute level of shear stress and the compliance mismatch with the unstented portion of the artery. This lumen adaptation allowed by the stent dismantling could be taken into account in future computational models
Sjölinder, Emil. "Spray and Wall Film Modeling with Conjugate Heat Transfer in OpenFOAM." Thesis, Linköpings universitet, Mekanisk värmeteori och strömningslära, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-84487.
Повний текст джерелаКниги з теми "Wall modeling for ibm"
Baker, John M. Enterprise business object modeling within IBM. [Atlanta]: Information Management Forum, 1996.
Знайти повний текст джерелаN, Mansour N., and United States. National Aeronautics and Space Administration., eds. Modeling of near-wall turbulence. [Washington, DC]: National Aeronautics and Space Administration, 1990.
Знайти повний текст джерелаN, Mansour N., and United States. National Aeronautics and Space Administration., eds. Modeling of near-wall turbulence. [Washington, DC]: National Aeronautics and Space Administration, 1990.
Знайти повний текст джерелаN, Mansour N., and United States. National Aeronautics and Space Administration., eds. Modeling of near-wall turbulence. [Washington, DC]: National Aeronautics and Space Administration, 1990.
Знайти повний текст джерелаLepota, N. J. Modeling of spray/wall interactions. Manchester: UMIST, 1996.
Знайти повний текст джерелаHeck, Ronald H. Multilevel and longitudinal modeling with IBM SPSS. New York: Routledge, 2010.
Знайти повний текст джерела1943-, Kim J., Moin Parviz, and Ames Research Center, eds. Near-wall k-[epsilon] turbulence modeling. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1987.
Знайти повний текст джерела1943-, Kim J., Moin Parviz, and Ames Research Center, eds. Near-wall k-[epsilon] turbulence modeling. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1987.
Знайти повний текст джерелаScott, Thomas, and Tabata Lynn Naomi, eds. Multilevel modeling of categorical outcomes using IBM SPSS. New York: Routledge, 2012.
Знайти повний текст джерелаPfaff, Philip. Financial modeling. Needham Heights, Mass: Allyn and Bacon, 1990.
Знайти повний текст джерелаЧастини книг з теми "Wall modeling for ibm"
O’Sullivan, Pat G., and Dan Wolfson. "IBM Industry Models: Experience, Management and Challenges." In Conceptual Modeling - ER 2006, 567. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11901181_44.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Introduction to Multilevel Modeling With IBM SPSS." In Multilevel and Longitudinal Modeling with IBM SPSS, 1–24. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-1.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Further Considerations in Modeling Hierarchical Data." In Multilevel and Longitudinal Modeling with IBM SPSS, 431–46. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-9.
Повний текст джерелаKamel, Aladin H. "Elastic Modeling on the IBM 3090 Vector Multiprocessor." In Proceedings of the Third European Conference on Mathematics in Industry, 107–17. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0629-7_10.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Defining a Basic Two-Level Multilevel Regression Model." In Multilevel and Longitudinal Modeling with IBM SPSS, 69–123. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-3.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Examining Individual Change With Repeated-Measures Data." In Multilevel and Longitudinal Modeling with IBM SPSS, 185–247. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-5.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Applications of Mixed Models for Longitudinal Data." In Multilevel and Longitudinal Modeling with IBM SPSS, 249–305. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-6.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Multivariate Multilevel Models." In Multilevel and Longitudinal Modeling with IBM SPSS, 307–70. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-7.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Cross-Classified Multilevel Models." In Multilevel and Longitudinal Modeling with IBM SPSS, 371–430. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-8.
Повний текст джерелаHeck, Ronald H., Scott L. Thomas, and Lynn N. Tabata. "Preparing and Examining the Data for Multilevel Analyses." In Multilevel and Longitudinal Modeling with IBM SPSS, 25–67. 3rd ed. New York: Routledge, 2022. http://dx.doi.org/10.4324/9780367824273-2.
Повний текст джерелаТези доповідей конференцій з теми "Wall modeling for ibm"
Ma, Luhan, Ang Chen, Yongbo Zhong, Zhichao Ren, Ye Lang, Jiazheng Zhao, and Zhifeng Dong. ""Modeling and simulation of blood flow and vessel stress in human brain during strenuous exercise"." In The 6th International Workshop on Simulation for Energy, Sustainable Development & Environment. CAL-TEK srl, 2018. http://dx.doi.org/10.46354/i3m.2018.sesde.007.
Повний текст джерелаGambaryan-Roisman, Tatiana, Hongyi Yu, Karsten Lo¨ffler, and Peter Stephan. "Long-Wave and Integral Boundary Layer Analysis of Falling Film Flow on Walls With Three-Dimensional Periodic Structures." In ASME 2009 7th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2009. http://dx.doi.org/10.1115/icnmm2009-82115.
Повний текст джерелаRahman, M. M., and T. Siikonen. "Near-Wall Turbulence Modeling Without Wall Distance." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3134.
Повний текст джерелаSilva, Andre R., Christian Rodrigues, and Jorge M. Barata. "Spray-Wall Interactions Modeling." In 55th AIAA Aerospace Sciences Meeting. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2017. http://dx.doi.org/10.2514/6.2017-1891.
Повний текст джерелаTrivedi, K., D. Wang, D. J. Hunt, A. Rindos, W. E. Smith, and B. Vashaw. "Availability Modeling of SIP Protocol on IBM© WebSphere©." In 2008 14th IEEE Pacific Rim International Symposium on Dependable Computing. IEEE, 2008. http://dx.doi.org/10.1109/prdc.2008.50.
Повний текст джерелаNaber, Jeffrey, and Rolf D. Reitz. "Modeling Engine Spray/Wall Impingement." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1988. http://dx.doi.org/10.4271/880107.
Повний текст джерелаGschwandtner, Philipp, Michael Knobloch, Bernd Mohr, Dirk Pleiter, and Thomas Fahringer. "Modeling CPU Energy Consumption of HPC Applications on the IBM POWER7." In 2014 22nd Euromicro International Conference on Parallel, Distributed and Network-Based Processing (PDP). IEEE, 2014. http://dx.doi.org/10.1109/pdp.2014.112.
Повний текст джерелаJohansen, J. A., J. J. MacFarlane, and G. A. Moses. "Modeling radiative transport in ICF plasmas on an IBM SP2 supercomputer." In International Conference on Plasma Science (papers in summary form only received). IEEE, 1995. http://dx.doi.org/10.1109/plasma.1995.531638.
Повний текст джерелаShihn, Harmanjeet, and Paul E. DesJardin. "Near-Wall Modeling for Vertical Wall Fires Using One-Dimensional Turbulence." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59861.
Повний текст джерелаFiocco, D. L., L. A. Neves, and M. F. Godoy. "Tridimensional modeling of the cardiac wall." In 2010 Pan American Health Care Exchanges (PAHCE 2010). IEEE, 2010. http://dx.doi.org/10.1109/pahce.2010.5474604.
Повний текст джерелаЗвіти організацій з теми "Wall modeling for ibm"
Moin, Parviz, Jeremy Templeton, Meng Wang, Franck Nicoud, and Jeffrey Baggett. Wall Modeling Techniques for Large-Eddy Simulation. Fort Belvoir, VA: Defense Technical Information Center, September 2002. http://dx.doi.org/10.21236/ada410335.
Повний текст джерелаVeletsos, A. S., and A. H. Younan. Dynamic modeling and response of soil-wall systems. Office of Scientific and Technical Information (OSTI), October 1993. http://dx.doi.org/10.2172/10118198.
Повний текст джерелаHimansu, Ananda, Edward B. Coy, Venkateswaran Sankaran, and Steven A. Danczyk. Modeling of Fuel Film Cooling on Chamber Hot Wall. Fort Belvoir, VA: Defense Technical Information Center, July 2014. http://dx.doi.org/10.21236/ada611830.
Повний текст джерелаMcKeon, Beverley J. PECASE - Multi-Scale Experiments and Modeling in Wall Turbulence. Fort Belvoir, VA: Defense Technical Information Center, December 2014. http://dx.doi.org/10.21236/ada619270.
Повний текст джерелаBalbuena, Perla B. Final Report “Modeling Catalyzed Growth of Single-Wall Carbon Nanotubes”. Office of Scientific and Technical Information (OSTI), December 2018. http://dx.doi.org/10.2172/1485119.
Повний текст джерелаR. Kaita, S. Jardin, B. Jones, C. Kessel, R. Majeski, J. Spaleta, R. Woolley, L. Zakharo, B. Nelson, and M. Ulrickson. Modeling of Spherical Torus Plasmas for Liquid Lithium Wall Experiments. Office of Scientific and Technical Information (OSTI), January 2002. http://dx.doi.org/10.2172/795775.
Повний текст джерелаPasinato, Hugo D. Computation and Modeling of Heat Transfer in Wall-Bounded Turbulent Flows. Fort Belvoir, VA: Defense Technical Information Center, May 2010. http://dx.doi.org/10.21236/ada563677.
Повний текст джерелаDeru, Michael, Eric Bonnema, Greg Barker, Ed Hancock, and Ashok Kumar. Energy Performance Measurement and Simulation Modeling of Tactical Soft-Wall Shelters. Fort Belvoir, VA: Defense Technical Information Center, July 2015. http://dx.doi.org/10.21236/ada621105.
Повний текст джерелаGreen, jesse, Amber Guckes, James Tinsley, and Brandon Baldonado. Gamma Array Simulation Toolkit for Modeling the NDSE Gamma Ray Detector Wall. Office of Scientific and Technical Information (OSTI), April 2022. http://dx.doi.org/10.2172/1864653.
Повний текст джерелаBarrows, Richard. Two Dimensional Finite Element Modeling of Swift Delta Soil Nail Wall by "ABAQUS". Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.6625.
Повний текст джерела