Добірка наукової літератури з теми "Various pressure and temperature conditions"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Various pressure and temperature conditions".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Various pressure and temperature conditions":
Phan, Thanh-Hoang, Ebrahim Kadivar, Van-Tu Nguyen, Ould el Moctar, and Warn-Gyu Park. "Thermodynamic effects on single cavitation bubble dynamics under various ambient temperature conditions." Physics of Fluids 34, no. 2 (February 2022): 023318. http://dx.doi.org/10.1063/5.0076913.
Walter, M. J., Y. Thibault, K. Wei, and R. W. Luth. "Characterizing experimental pressure and temperature conditions in multi-anvil apparatus." Canadian Journal of Physics 73, no. 5-6 (May 1, 1995): 273–86. http://dx.doi.org/10.1139/p95-039.
Lei, Fan, Yan Xue, and Donglin Liu. "Simulation of millimeter-sized microwave plasma discharge generator under various conditions." AIP Advances 12, no. 8 (August 1, 2022): 085015. http://dx.doi.org/10.1063/5.0105035.
Mohammed, Suad Abdulmuttaleb, Areej Dalaf Abbas, and Laith Salem Sabry. "Effect of Operating Conditions on Reverse Osmosis (RO) Membrane Performance." Journal of Engineering 20, no. 12 (July 9, 2023): 61–70. http://dx.doi.org/10.31026/j.eng.2014.12.04.
Zhao, Yanlin, Qiang Liu, Liming Tang, Jian Liao, Le Chang, Xiaguang Wang, Yang Li, and Sheng Ren. "Test Study of Seepage Characteristics of Coal Rock under Various Thermal, Hydraulic, and Mechanical Conditions." Machines 10, no. 11 (November 2, 2022): 1012. http://dx.doi.org/10.3390/machines10111012.
Rashid, Waleed Turki, Israa Aziz Alkadira, and Moayyed Gased Jalhoom. "Effect of Operating Conditions on Removal Heavy and Radioactive Elements by Reverse Osmosis Membrane." Al-Qadisiyah Journal for Engineering Sciences 13, no. 3 (September 30, 2020): 240–45. http://dx.doi.org/10.30772/qjes.v13i3.665.
Wang, Jie, Jie Wang, and Christine Ehlig-Economides. "Effect of Predisolved Natural Gas on CO2 Solubility in Water With Various Salinities at Reservoir Conditions." Petrophysics – The SPWLA Journal of Formation Evaluation and Reservoir Description 64, no. 6 (December 1, 2023): 970–77. http://dx.doi.org/10.30632/pjv64n6-2023a11.
Wang, Jianqiang, Yu Song, Shuaishuai Dong, Song Ding, Yukun Geng, and Xiaotong Gao. "Triaxial Experimental Study of Zinc Contaminated Red Clay under Different Temperature Conditions." Applied Sciences 12, no. 21 (October 23, 2022): 10742. http://dx.doi.org/10.3390/app122110742.
Harfoush, M., S. A. Mirbagheri, M. Ehteshami, and S. Nejati. "Arsenic removal from drinking water using low-pressure nanofiltration under various operating conditions." Water Practice and Technology 13, no. 2 (June 1, 2018): 295–302. http://dx.doi.org/10.2166/wpt.2018.042.
Allen, Eric E., Daniel Facciotti, and Douglas H. Bartlett. "Monounsaturated but Not Polyunsaturated Fatty Acids Are Required for Growth of the Deep-Sea BacteriumPhotobacterium profundum SS9 at High Pressure and Low Temperature." Applied and Environmental Microbiology 65, no. 4 (April 1, 1999): 1710–20. http://dx.doi.org/10.1128/aem.65.4.1710-1720.1999.
Дисертації з теми "Various pressure and temperature conditions":
Song, Chenlu. "Long-term observation of rock fracture permeability and structure under various pressure and temperature conditions." Doctoral thesis, Kyoto University, 2020. http://hdl.handle.net/2433/253256.
0048
新制・課程博士
博士(工学)
甲第22420号
工博第4681号
新制||工||1731(附属図書館)
京都大学大学院工学研究科都市社会工学専攻
(主査)教授 岸田 潔, 教授 三村 衛, 准教授 肥後 陽介
学位規則第4条第1項該当
Doctor of Philosophy (Engineering)
Kyoto University
DFAM
Szilágyi, Robert. "Study of partial discharge and gas breakdown phenomena at a triple junction under various pressure and temperature conditions." Electronic Thesis or Diss., université Paris-Saclay, 2024. http://www.theses.fr/2024UPAST007.
Triple junctions (between a gas, a solid insulator, and a conductor), which are present in numerous industrial applications, constitute a critical zone for the triggering of electrical discharges due to local reinforcement of the electric field. In addition, these triple points can be exposed to harsh environmental conditions. The aim of this study was therefore to come to a better understanding of the phenomena of partial discharge (PD) and gas breakdown from a triple junction under different pressure and temperature conditions. In particular, the Partial Discharge Inception Voltage (PDIV), the Partial Discharge Extinction Voltage (PDEV), and the Flashover Voltage (FOV) of surface breakdown of the solid insulator were examined.In this context, an experimental set-up was designed and operated in a nitrogen atmosphere ranging from 50 mbar to atmospheric pressure, for imposed temperatures varying from ambient to 400 °C. Particular attention was paid to aluminium oxide, a solid insulator material that can be used in this temperature range. The influence of temperature on PDIV (and PDEV) on the one hand, and FOV on the other, was characterised, analysed and interpreted by means of dielectric measurements, high-speed imagery and numerical simulations. Finally, under high temperature conditions and despite the precautions taken, an oxidation of the high voltage electrode was observed whose influence on the PDIV was analysed
Larsen, Håvard. "Behaviour of polymer muds under high pressure – high temperature conditions." Thesis, Norwegian University of Science and Technology, Department of Petroleum Engineering and Applied Geophysics, 2007. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1534.
A well is classified as a HPHT (High Pressure High Temperature) well if the static bottomhole temperatures are greater than 350 °C and when the formation pressures exceed 1800 kg/m3 ECD. Mud weights as high as 2400 kg/m3 may be required to maintain a proper well control. The temperature of the drilling fluid when circulating in the well may range from 0 °C to 150 °C and it is important that the drilling fluid maintain acceptable rheological properties within the whole range. The rheological properties of the mud will strongly depend on the temperature and the pressure variations. The problems regarding HPHT wells are mostly due to ECD and cuttings transport.
In order to control and measure the viscosity for deep HPHT wells we have conducted laboratory experiments that deal with aging at different temperatures on a polymer mud, as well as pressure and temperature effects on a field mud. We have also calculated the annular pressure using Landmark Wellplan software. To calibrate the instruments, i.e. the Physica HPHT viscometer and a Fann viscometer, we used ubelohde, known to give an exact value of the viscosity of a fluid. The calibration liquid was a 2-stroke motor oil with different amounts of Exxsol-D60 added.
The aging experiments were conducted in a mixture of water and HEC that were put in three different incubators at 20 °C, 60 °C and 90 °C for 1, 3, 8, 11, 15 and 20 days. The results showed that the viscosity decreased rapidly in the solutions that were aged at the highest temperatures and that most of the decrease took place during the first day of aging.
In the experiments on real (field) mud exposed to high pressures and temperatures the Physica viscometer was used. The results showed that the pressure effects were negligible compared to the temperature effects. During the measurements we experienced that the viscosity decreased as the temperature increased and that the decrease in the viscosity was more significant from 20 to 60 °C than from 60 to 90 °C.
Based on the results obtained in the laboratory and an evaluation of fluid implication on well pressure, we were able to draw the following main conclusions:
• Laboratory experiments are very educational. To learn that reality is not straight forward to measure was enlightening.
• The viscosity is very dependant on the temperature.
• The combined effect of pressure on the viscosity of a field mud is negligible.
• The annular pressure differences calculated in Landmark Wellplan did not show any significant differences for the different well temperatures.
Bagdanavicius, Audrius. "Premixed combustion of alternative fuels under varying conditions of temperature and pressure." Thesis, Cardiff University, 2010. http://orca.cf.ac.uk/54231/.
Poloni, Roberta. "Heavy alkali metal-intercalated fullerenes under high pressure and high temperature conditions." Lyon 1, 2007. http://tel.archives-ouvertes.fr/docs/00/19/46/10/PDF/THESIS.pdf.
In this thesis, we explore the phase diagram of the heavy alkali metal intercalated fullerenes, Rb6C60 and Cs6C60, under high pressure (<50 GPa) and high temperature conditions (from ambient to 1500 K). The work includes a series of X-ray absorption spectroscopy, X-ray diffraction and Raman spectroscopy measurements as well as ab initio DFT calculations under pressure. By coupling both experiments and calculations, we observed that the presence of strong ionic interactions between each molecule and the alkali metal ions, prevents fullerene polymerization under pressure. In the case of Cs6C60, this allows to extend the pressure stability of the C60 molecules more than twice with respect to pristine solid C60. In the case of Rb6C60 a phase transition, is observed at 35 GPa. A pressure induced enhanced deformation of the fullerene molecule in the studied systems has been evidenced. The compressibility of the both crystals has been measured and calculated
Schaffer, Joseph F. "Verification and Adaptation of an Infiltration Model for Water at Various Isothermal Temperature Conditions." Digital WPI, 1999. https://digitalcommons.wpi.edu/etd-theses/1061.
Seto, Kelsey C. "Hydrogen production from aluminum-water reactions subject to high pressure and temperature conditions." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/111936.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 75-77).
Aluminum fuel has become an attractive form of energy storage in recent years as it is both a highly abundant and extremely energy dense material. Research has discovered methods of treating aluminum with liquid metal, enabling the aluminum to produce large amounts of hydrogen when oxidized by liquid water. When this fuel reacts with water, it produces hydrogen, heat, and aluminum hydroxide (Al(OH) 3 ). Although this aluminum fuel has already been integrated into an effective mobile hydrogen production source for hydrogen fuel cells, the system size and weight is restricted by the amount of water that is required to react the aluminum. The less water that needs to be carried on board, the better, and the only way to decrease the amount of water that is required to produce hydrogen through aluminum-water reactions is to alter the chemistry of the reaction. This thesis investigates the possibility of manipulating the chemistry of these reactions at high pressures and temperatures to produce aluminum oxyhydroxide (AlOOH) or aluminum oxide (Al203 ), both of which are byproducts of aluminum-water reactions which consume less water than the Al(OH) 3 reaction for the amount of hydrogen produced. A MATLAB simulation was constructed to predict the favorability of each byproduct by analyzing the Gibbs free energy of the reactions as a function of pressure and temperature. This simulation revealed that A100H becomes favorable over Al(OH) 3 at 142.38°C and 387kPa and A120 3 becomes favorable over A100H at 174.21°C and 889kPa in a system with a 200ml volume in which 5g of fuel is reacted. Pressurized tests were also carried out and the experiment results showed that A1OOH was produced from these aluminum-water reactions at 181°C and 1035kPa, proving that it is possible to manipulate these reactions to improve the performance of aluminum fuel as a hydrogen source.
by Kelsey Carolyn Seto.
S.M.
Holmberg, Johanna. "Pressure Temperature Conditions of the Otrøy Opmhacite-Garnet Gneiss, Western Gneiss Region, Skandinavian Caledonides." Thesis, Uppsala universitet, Institutionen för geovetenskaper, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-256283.
Granat-omphacitförande gnejser från ön Otrøy i Western Gneiss Region (WGR), Norge, Skandinaviska Kaledoniderna, har undersöks i den här studien. WGR är ett av världens mest studerade område för ultrahögtryckmetamorfa bergarter. I den här typen av gnejser förekommer linser av ultrahögtrycksbergarter så som granat-peridotiter och eklogiter. I den studerade Otrøygnejsen förekommer bland annat phengit och omphacit med inneslutningar av sannolika pseudomorfer efter coesit. Detta visar på att Otrøygnejsen troligen har bildats under metamorfos vid ultrahöga tryck. Geotermobarometriundersökningen, baserat på granat + clinopyroxen + phengitsystemet, visar att tryck- och temperaturförhållandena var ca.880 ˚C och 2.2 GPa. Det innebär att gnejsen metamorfoserats inom intervallet karaktäristiskt för högtrycksmetamorfos. Likväl, kan det fastställas att Otrøygnejsen bildats till följd av en djup subduktion under kontinent-kontinentkollision. Den här studien bidrar till en ökad förståelse av processerna som påverkar den kontinentala skorpan vid djup subduktion och vidgar våra kunskaper om den komplexa metamorfa och tektoniska utvecklingen i WGR och de Skandinaviska Kaledoniderna.
Barboza, Felipe Moreira. "STUDY OF VIBRATIONAL PROPERTIES OF THYMIDINE CRYSTAL IN EXTREME CONDITIONS OF PRESSURE AND TEMPERATURE." Universidade Federal do CearÃ, 2017. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=18956.
The unit of sugar and base connected by a N-β-glycosyl linkage is named a nucleoside. In the present work the nucleoside thymidine, whose molecular formula is C10N2O5H14, was studied by Raman spectroscopy, subjecting it extreme conditions of pressure and temperature, as well as X ray diffraction measurements. An auxiliary analysis of normal crystal vibration modes was performed using first principles calculations using the B3LYP functional together with the Gaussian bases 6-31G+(d) and potential energy distribution analysis (PED). These results, together with literature data and Raman spectroscopy measurements in several thymidine scattering geometries, allowed the identification of the various normal modes of crystal vibration. X-ray diffraction experiments were performed in the temperature range between 83 and 413 K. Experiments of Raman spectroscopy under extreme temperature conditions (20 to 380 K) were performed in the spectral range of 20 to 3400 cm-1. From the analysis of the results, it is possible to draw some conclusions. (i) The thymidine crystal remained stable throughout the investigated temperature range, indicating that the temperature effect is not sufficient to modify the hydrogen bonds present between the molecules in such a way as to modify the symmetry of the crystal. (ii) The material studied showed some slight changes in the vibrational spectra in the experiment performed at low temperatures, suggesting, if not a structural phase transition, at least some conformational modification of the thymidine molecules. Raman spectra of thymidine crystal were obtained for pressures up to 5.0 GPa in a diamond anvil cell. The results show the presence of anomaly in the Raman spectrum at pressures close to 3.0 GPa. This anomaly is characterized by disappearance of lattice modes, appearance of some internal modes, splitting of high wavenumbers modes, downshift of modes associated with hydrogen bonds, changes in the intensity of internal modes and discontinuities of the slopes of the wavenumbers versus pressure for several Raman modes. This set of modifications was interpreted as consequence of a phase transition undergone by thymidine close to 3.0 GPa. Further, decompression to atmospheric pressure generates the original Raman spectrum, showing that the pressure-induced phase transition undergone by thymidine crystals is reversible. A comparison with results on other nucleosides submitted to high pressure is also furnished.
Quando a pentose (glicose) e uma base nitrogenada unem-se por meio de uma ligaÃÃo N-β glicosÃdica forma-se uma molÃcula denominada de nucleosÃdeo. No presente trabalho o nucleosÃdeo timidina, cuja fÃrmula molecular à C10N2O5H14, foi estudado atravÃs de espectroscopia Raman, submetendo-o a condiÃÃes extremas de pressÃo e de temperatura, alÃm de medidas de difraÃÃo de raios X. Uma anÃlise auxiliar a respeito dos modos normais de vibraÃÃo do cristal foi realizada atravÃs de cÃlculos de primeiros princÃpios utilizando-se o funcional B3LYP em conjunto com as bases gaussianas 6-31G+(d) e anÃlise de distribuiÃÃo de energia potencial (PED). Esses resultados, juntamente com dados da literatura e medidas de espectrocopia Raman em diversas geometrias de esplalhamento na timidina permitiram uma identificaÃÃo dos vÃrios modos normais de vibraÃÃo do cristal. Os experimentos por difraÃÃo de raios X foram realizados no intervalo de temperatura entre 83 e 413 K. Experimentos de espectroscopia Raman sob condiÃÃes extremas de temperatura (20 a 380 K) foram realizados no intervalo espectral compreendido entre 20 e 3400 cm-1. Da anÃlise dos resultados, à possÃvel tirar algumas conclusÃes. (i) O cristal de timidina manteve-se estÃvel em todo o intervalo de temperatura investigado, indicando que o efeito de temperatura nÃo à suficiente para modificar as ligaÃÃes de hidrogÃnio presentes entre as molÃculas de tal forma que haja modificaÃÃo da simetria do cristal. (ii) O material estudado apresentou algumas leves mudanÃas nos espectros vibracionais no experimento realizado a baixas temperaturas, sugerindo, se nÃo uma transiÃÃo de fase estrutural, pelo menos alguma modificaÃÃo conformacional das molÃculas da timidina. Experimentos submetendo o cristal a pressÃes de atà 5 GPa foram realizados utilizando-se uma cÃlula de pressÃo a extremos de diamantes. Os resultados mostraram anomalias nos espectros Raman por volta de 3.0 GPa. Essas anomalias foram caracterizadas pelo desaparecimento de alguns modos de rede, surgimento de alguns modos internos, deslocamento para menores nÃmeros de onda de modos associados a ligaÃÃes de hidrogÃnio e descontinuidades dos coeficientes lineares de vÃrios modos nos grÃficos de nÃmero de onda em funÃÃo da pressÃo. Essa sÃrie de modificaÃÃes foram interpretadas como consequÃncia de uma transiÃÃo de fase sofrida pela timidina por volta de 3.0 GPa. AlÃm disso, a descompressÃo da amostra atà a pressÃo atmosfÃrica mostrou que a transiÃÃo de fase à reversÃvel. TambÃm fornecemos uma comparaÃÃo com resultados de outros nucleosÃdeos submetidos a altas pressÃes.
Bamgbade, Babatunde A. "MEASUREMENTS AND MODELING OF HYDROCARBON MIXTURE FLUID PROPERTIES UNDER EXTREME TEMPERATURE AND PRESSURE CONDITIONS." VCU Scholars Compass, 2015. http://scholarscompass.vcu.edu/etd/3967.
Книги з теми "Various pressure and temperature conditions":
United States. National Aeronautics and Space Administration., ed. Droplet-turbulence interactions in sprays exposed to supercritical environmental conditions: Final report, NASA grant, #NAG8-160. [Washington, DC: National Aeronautics and Space Administration, 1993.
Manaa, M. Riad. Chemistry at extreme conditions. Amsterdam: Elsevier, 2005.
D, Hubbard Colin, and Eldik Rudi van, eds. Chemistry under extreme or non-classical conditions. New York: John Wiley, 1996.
United States. National Aeronautics and Space Administration., ed. SiC recession due to SiO₂ scale volatility under combustor conditions. Brook Park, Ohio: NYMA, Inc., 1997.
United States. National Aeronautics and Space Administration., ed. SiC recession due to SiO₂ scale volatility under combustor conditions. Brook Park, Ohio: NYMA, Inc., 1997.
Canada, Atomic Energy of. Chronology and Ambient Temperature/Pressure Conditions of Fluid Flow Through the Eye-Dashwa Lakes Pluton Based on the 18O/16O Ratio and Fluid Inclusions. S.l: s.n, 1985.
Pachurin, German. Technology for studying the destruction of structural materials under different loading conditions. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/981296.
Technology for high pressure high temperature reservoir conditions. London: Bentham Press, 1995.
Jacobsen, Dean, and Olivier Dangles. The high altitude environment. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198736868.003.0001.
Droplet-turbulence interactions in sprays exposed to supercritical environmental conditions: Final report, NASA grant, #NAG8-160. [Washington, DC: National Aeronautics and Space Administration, 1993.
Частини книг з теми "Various pressure and temperature conditions":
Schmidt, Johannes Benedikt, Jan Breitenbach, Ilia V. Roisman, and Cameron Tropea. "Interaction of Drops and Sprays with a Heated Wall." In Fluid Mechanics and Its Applications, 333–53. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-09008-0_17.
Jacquemet, Nicolas, Jacques Pironon, Vincent Lagneau, and Jérémie Saint-Marc. "Well Cement Aging in Various H2S-CO2Fluids at High Pressure and High Temperature: Experiments and Modelling Well Cement Aging at High PT Conditions." In Carbon Dioxide Sequestration and Related Technologies, 421–35. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118175552.ch23.
Daub, Dennis, Sebastian Willems, Burkard Esser, and Ali Gülhan. "Experiments on Aerothermal Supersonic Fluid-Structure Interaction." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 323–39. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_21.
Werzner, Eric, Miguel A. A. Mendes, Cornelius Demuth, Dimosthenis Trimis, and Subhashis Ray. "Simulation of Fluid Flow, Heat Transfer and Particle Transport Inside Open-Cell Foam Filters for Metal Melt Filtration." In Multifunctional Ceramic Filter Systems for Metal Melt Filtration, 301–33. Cham: Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_13.
Grodzinsky, Ewa, and Märta Sund Levander. "Physiological and Inflammatory Activity in Various Conditions." In Understanding Fever and Body Temperature, 115–27. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-21886-7_8.
Razdolsky, Leo. "Transient Engineering Creep of Materials Under Various Fire Conditions." In Probability Based High Temperature Engineering, 249–383. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41909-1_5.
Robaschik, Dieter. "Fluctuations of the Casimir Pressure at Finite Temperature." In Quantum Field Theory Under the Influence of External Conditions, 50–53. Wiesbaden: Vieweg+Teubner Verlag, 1996. http://dx.doi.org/10.1007/978-3-663-01204-7_8.
Gillet, Ph. "Introduction to Raman Spectroscopy at Extreme Pressure and Temperature Conditions." In Microscopic Properties and Processes in Minerals, 43–69. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4465-0_3.
Hussain, Majid, and Ajanta Sachan. "Pore Pressure Response of Natural Soils Under Various Testing Conditions." In Lecture Notes in Civil Engineering, 251–63. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4001-5_23.
Brianskaia, I. P., V. I. Vasenev, R. A. Hajiaghayeva, and D. V. Morev. "Evaluation of Peat Stability Under Various Temperature and Moisture Conditions." In Springer Geography, 153–59. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-89602-1_19.
Тези доповідей конференцій з теми "Various pressure and temperature conditions":
Wang, Zhengdong, Changjun Liu, Fu-Zhen Xuan, and Shan-Tung Tu. "Determination of Material Degradation at Various Environmental Conditions." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57570.
Sakaguchi, Katsumi, Yuichiro Nomura, Shigeki Suzuki, and Hiroshi Kanasaki. "Applicability of the Modified Rate Approach Method Under Various Conditions Simulating Actual Plant Conditions." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93220.
Fukuta, Yuichi, Seiji Asada, Yuichiro Nomura, and Hiroshi Kanasaki. "Examination of Factors in the Modified Rate Approach Method Under Various Conditions." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57435.
Tanaka, Masa-aki, and Toshiharu Muramatsu. "Numerical Simualtion of Turbulence Mixing Characteristic in Various Secondary Flow Conditions at T-Junction Piping Systems." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3028.
Higley, Megan, Mustafa Hadj-Nacer, and Miles Greiner. "Temperature Prediction of a TN-32 Used Nuclear Fuel Canister Subjected to Vacuum Drying Conditions." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84844.
Pu, Yi-Hao, Tara Larsson, Tom Robeyn, Michel De Paepe, and Sebastian Verhelst. "Methanol Evaporation in an Engine Intake Runner under Various Conditions." In 16th International Conference on Engines & Vehicles. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-24-0018.
Solin, Jussi, Sven Reese, H. Ertugrul Karabaki, and Wolfgang Mayinger. "Fatigue Performance of Stabilized Austenitic Stainless Steels: Experimental Investigations Respecting Operational Relevant Conditions Like Temperature and Hold Time Effects." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97502.
Yamamoto, Masato, Akihiko Kimura, Kunio Onizawa, Kentaro Yoshimoto, Takuya Ogawa, Yasuhiro Mabuchi, Hans-Werner Viehrig, Naoki Miura, and Naoki Soneda. "A Round Robin Program of Master Curve Evaluation Using Miniature C(T) Specimens: 3rd Report — Comparison of T0 Under Various Selections of Temperature Conditions." In ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-28898.
Tateno, Masayoshi, and Eiichiro Yokoi. "Dependence of Tensile Strength on Geometrical Interface Conditions of Bonded Dissimilar Materials." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97731.
Williams, Bruce W., and C. Hari M. Simha. "Comparison of Various Damage Models in Modelling 3D Crack Propagation." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63082.
Звіти організацій з теми "Various pressure and temperature conditions":
Witte, Hawley, and Grimley. PR-015-12601-R01 USM Accuracy Effects with Pressure and Temperature Variations from Initial Calibration. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), July 2013. http://dx.doi.org/10.55274/r0010810.
Bajwa, Abdullah, and Timothy Jacobs. PR-457-17201-R01 Residual Gas Fraction Estimation Based on Measured In-Cylinder Pressure. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), September 2018. http://dx.doi.org/10.55274/r0011519.
Grauer and Chapman. L52331 Exhaust Manifold Design Guidelines to Optimize Scavenging and Turbocharger Performance. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), August 2009. http://dx.doi.org/10.55274/r0010664.
King. L52120 Long-Term Environmental Monitoring of Near-Neutral and High-pH SCC Sites. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), January 2005. http://dx.doi.org/10.55274/r0011228.
Author, Unknown. PR-203-027-R01 Evaluation of Screen Testing Program for J-Lay Connections. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), March 1992. http://dx.doi.org/10.55274/r0012125.
Mohr, H. O. PR-209-9217-R01 Mechanical Connections for J-lay. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), July 1994. http://dx.doi.org/10.55274/r0012126.
Wilson. PR-239-9525-E01 Integrated Test Plan. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), January 1996. http://dx.doi.org/10.55274/r0011046.
Beshouri. PR-309-04200-R01 Modeling Methodology for Parametric Emissions Monitoring System for Combustion Turbines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), March 2005. http://dx.doi.org/10.55274/r0010731.
George. PR-015-10600-R01 Proposed Sampling Methods for Supercritical Natural Gas Streams. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), July 2010. http://dx.doi.org/10.55274/r0010981.
Tawfik, Aly, Deify Law, Juris Grasis, Joseph Oldham, and Moe Salem. COVID-19 Public Transportation Air Circulation and Virus Mitigation Study. Mineta Transportation Institute, June 2022. http://dx.doi.org/10.31979/mti.2021.2036.