Добірка наукової літератури з теми "UDSM"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "UDSM".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "UDSM"

1

Grosz-Ngaté, Maria, Saskia Pallais, and Jonathan Walz. "Study Abroad in Tanzania." African Issues 28, no. 1-2 (2000): 119–23. http://dx.doi.org/10.1017/s1548450500007009.

Повний текст джерела
Анотація:
The University of Florida (UF) Center for African Studies and International Center jointly sponsor an academic-year program at the University of Dar es Salaam (UDSM) in Tanzania. Begun in 1989, the program offers students from across the United States the opportunity to pursue their studies in a range of fields alongside Tanzanian students. Students pay UDSM tuition and a program development fee. In accordance with the agreement between UDSM and UF, tuition is deposited in an account at the University of Florida to be used for UDSM faculty development: Each year several junior faculty members nominated by their departments spend three months at UF working in consultation with local faculty and using UF library and computer facilities. In my capacity as assistant director of the Center for African Studies, I have had the pleasure of working with both the visiting Tanzanian faculty and the U.S. students going to Tanzania.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Sholehah, Amalia, and Akhmad Herman Yuwono. "Stress – Strain Analysis on ZnO Nanostructures Synthesized via Wet Chemistry Method." Advanced Materials Research 1112 (July 2015): 57–61. http://dx.doi.org/10.4028/www.scientific.net/amr.1112.57.

Повний текст джерела
Анотація:
In the present work, ZnO nanostructures were synthesized via wet chemistry method. The seeding solution was prepared from zinc nitrate tetrahydrate and hexamethylenetetramine. Prior to the heating process, the seeding solution was immersed in cold bath (0°C). XRD analysis had shown sharp peaks in diffractogram, indicating the high crystallinity of ZnO nanostructures. The crystallite size was determined using Scherrer equation and Williamson-Hall method. Other relevant parameters including stress, strain, and energy density were calculated using Williamson-Hall assuming UDM, UDSM, and UDEDM. The results had revealed that crystallite size calculated with Williamson-Hall method is more accurate than Scherrer equation.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Dani, Mohammad, Aziz Khan Jahja, Parikin Parikin, Andon Insani, and Riza Iskandar. "Strain analysis in ferritic filler weldment by using the modified Williamson-hall method." Malaysian Journal of Fundamental and Applied Sciences 13, no. 4 (December 26, 2017): 754–59. http://dx.doi.org/10.11113/mjfas.v0n0.771.

Повний текст джерела
Анотація:
A strain analysis study of the Fe-Cr-Ni based low carbon steel for welding application prepared by a thermal-induction furnace were performed using a modified Williamson-Hall (MHW) method. Three different models, uniform deformation (UDM), the uniform deformation stress (UDSM), and the the uniform deformation energy density (UDEDM) models. The optimal results showed by calculation result using UDM method indicate that uniform deformation was present on analyzed material. Based on UDM method, the welded material contains smaller grain size than the based materials. The calculated of average microstrain values of 7.6351×10-4 and -9.21×10-4 for based and welded materials respectively suggest different strain phenomena occurs during welding processes. Microstructure analysis by means of transmission electron microscopy reveal that based material consist of grains in 50-100 nm sizes and with planar defects are also detected.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Samanta, Jagannath, and Bishnu Prasad De. "Delay analysis of UDSM CMOS VLSI circuits." Procedia Engineering 30 (2012): 135–43. http://dx.doi.org/10.1016/j.proeng.2012.01.844.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mhokole, Erick Leonard, and Collin Kimaryo. "Usage of Reference Management Software by Postgraduate Students at the University of Dar es Salaam, Tanzania." University of Dar es Salaam Library Journal 17, no. 2 (January 18, 2023): 188–203. http://dx.doi.org/10.4314/udslj.v17i2.12.

Повний текст джерела
Анотація:
This paper presents the of a study conducted at the University of Dar es Salaam (UDSM), Tanzania on the usage of Reference Management Software (RMS) by postgraduate students and guided by TAM and DIT theories. The study employed a descriptive research design and both. One hundred and four (The study Findings further revealed that most respondents have a favourable attitude toward RMS and perceive RMS as useful and easy to use, even though few actually use RMS mainly totechnical services support, lack of internet connectivity and unreliable power supply. The study concluded that the usage of RMS by postgraduate students at UDSM is low.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Swai, K. W., and Z. N. D. Swai. "Construction of Pile Foundation for Hall Seven, UDSM." Tanzania Journal of Engineering and Technology 1, no. 1 (October 4, 2020): 29–36. http://dx.doi.org/10.52339/tjet.v1i1.6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Al-Hertani, Hussam, Dhamin Al-Khalili, and Côme Rozon. "UDSM subthreshold leakage model for NMOS transistor stacks." Microelectronics Journal 39, no. 12 (December 2008): 1809–16. http://dx.doi.org/10.1016/j.mejo.2008.05.002.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Li, Li, Hongxia Liu, Cui Dong, and Wen Zhou. "Characterization analysis of UDSM LVTSCR under TLP stress." Journal of Semiconductors 32, no. 5 (May 2011): 054002. http://dx.doi.org/10.1088/1674-4926/32/5/054002.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Pulimeno, Azzurra, Mariagrazia Graziano, and Gianluca Piccinini. "UDSM Trends Comparison: From Technology Roadmap to UltraSparc Niagara2." IEEE Transactions on Very Large Scale Integration (VLSI) Systems 20, no. 7 (July 2012): 1341–46. http://dx.doi.org/10.1109/tvlsi.2011.2148183.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Said, Mahir M., Asia A. Saad, Geoffrey R. John, and Aviti T. Mushi. "Generation of Electricity by Using Microbial Fuel Cell Prototype Fed by Sewage: Case Study at the University of Dar es Salaam." Tanzania Journal of Science 49, no. 1 (March 31, 2023): 240–49. http://dx.doi.org/10.4314/tjs.v49i1.21.

Повний текст джерела
Анотація:
The access to electricity is still not reliable in Tanzania. Whilst, there are several locations within the country that have wastewater cites that are not economically used to produce electricity. At the University of Dar es Salaam (UDSM), there are main grid power, and few scattered solar panels. This study was intended to bridge the divide between the current increasing power demands of the UDSM by exploiting not so much used sources, such as electric energy from wastewater. This study was undertaken to develop a Microbial Fuel Cell (MFC) prototype fed by sewage in Dar es Salaam, for electricity generation using cost effective materials for the cathode compartment. The collection of samples took place using sewage substrates from the UDSM oxidation ponds. The untreated sewage was collected from oxidation ponds. Preliminary experiments were carried out to identify the cathode and substrate that produced better results in terms of volts and current output. Aluminium produced the most desirable results compared to copper, stainless steel and mild steel in all the substrates. On the other hand, untreated sewage with aluminium/carbon electrodes produced higher voltage and current compared to treated sewage with the same electrodes. Thereafter, a prototype of the MFC was developed by connecting three single chambered cells in series of 628 cm3 volume of untreated sewage with aluminium and carbon electrodes. The prototype generated a stable voltage of 1.73 V and a current of 0.07 mA recorded for a period of one hour. The power generated was enough to light a 6.25 mW LED bulb of 25 mA across a 100 Ω resister. Therefore, untreated sewage produced more power in MFCs with aluminium/carbon electrodes compared to the other tested materials. Keywords: Aluminium electrodes, charcoal electrode, alternative energy source, wastewater
Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "UDSM"

1

Feldman, Gerald George. "Upgrade decision support model (UDSM) for enterprise systems : drivers and processes." Thesis, Birmingham City University, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.669669.

Повний текст джерела
Анотація:
Enterprise Systems (ES) have matured over the years, offering continuous improvement to the underlying technology and functionality, hence, it is reasonable to anticipate that organisations would upgrade their systems to realise the benefits of these improvements. However, the range of benefits and risks involved within upgrade projects, motivates only few organisations to upgrade; indicating that upgrade decision-making is not trivial, and requires a comprehensive consideration of the impacts, efforts, and benefits. To date, research on ES upgrade recommends practical guidance for managing and supporting upgrade projects, with few studies focusing on upgrade decision-making, yet the upgrade decision process remains one of the areas in post-implementation that is least explored. This research investigates the interrelated aspects of ES upgrade phenomena to explore the drivers and decision processes. A qualitative survey design was adopted to explore ES upgrade decision-making process and through web-based questionnaires and semi-structured interviews, qualitative data from 41 respondents representing 23 organisations was collected, coded, and analysed. Drawing from the Technology-Organisation-Environment (T-O-E) framework and process view of decision-making to theorise the findings, this research proposes an Upgrade Decision Support Model (UDSM) to represent ES upgrade decision-making process. The model comprises of two phases namely exploration and evaluation. The evaluation phase consists of two processes, which are objective assessment and strategy selection. In addition, objective assessment includes three sub-processes these are technical analysis, functional gap-fit analysis, and impact assessment. The study findings indicate that the decision to upgrade is an outcome of understanding the upgrade need, possible impacts, and benefits. Thus, asserting the importance of assessing the level of change, effort required and modifications to be reapplied prior to the upgrade decision. Additionally, the findings advocate that there is a relationship between upgrade drivers and the selection of an upgrade strategy, which guides the processes undertaken during the decision-making. This research contributes key insights on ES upgrade decision-making offering a thorough understanding of the drivers and processes. In addition, it presents decision makers with a methodical strategy for approaching upgrade decisions; hence, enables the identification of possible challenges and measures to overcome these issues.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mgaiwa, Sophie Mynah. "The investigation of an Open Distance and e-learning (ODeL) Centre at the University of Dar es salaam." Thesis, Curtin University, 2009. http://hdl.handle.net/20.500.11937/2533.

Повний текст джерела
Анотація:
Many higher education Institutions commit themselves to e-learning because they believe in its effectiveness as an alternative to traditional face to face methods of delivery, e-learning may to some extent increase enrolment and reduce training costs while allowing students the flexibility to attend classes at convenient times and places. University of Dar es salaam (UDSM) being the prime public university in Tanzania wants to adopt e-learning techniques in courses delivery; however the establishment of e-learning requires systematic planning, design, development and evaluation in order to achieve successful implementation. Therefore there is a need for the UDSM to address critical issues that might be faced by academics and the students in future.The aim of this study was to identify a culturally appropriate model inclusive of the most effective strategies and policies required for the establishment of an Open Distance e-learning (ODeL) centre at the University of Dar es salaam (UDSM). The study examined factors and conditions that reveal the importance of the development of an ODeL centre at the University of Dar es salaam, as well as analysing expertise (skills and knowledge) of the university’s academic and technical staff. It also examines existing models of similar centres from universities in both developed and developing countries. A mixed method was adopted where data was collected using a variety of tools: survey; interviews and content analysis.This study has indicated that the University of Dar es salaam can successfully develop an ODeL centre and implement e-learning if optimal capabilities of the selected media and technology are utilised effectively and efficiently. To support the development and delivery of e-learning a number of staff with a variety of skills and appropriate Information Communication Technology infrastructure are required. UDSM and other institutions wishing to participate in e-learning should review their educational policies and formulate strategies to ensure sustainability and quality of delivery.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sousa, Debora Bezerra de. "Estudo do potencial químico de Fusarium udum." reponame:Repositório Institucional da UFC, 2017. http://www.repositorio.ufc.br/handle/riufc/27184.

Повний текст джерела
Анотація:
SOUSA, Debora Bezerra de. Estudo do potencial químico de Fusarium udum. 2017. 139 f. Dissertação (Mestrado em Química) - Universidade Federal do Ceará, Fortaleza, 2017.
Submitted by Celia Sena (celiasena@dqoi.ufc.br) on 2017-11-07T20:09:55Z No. of bitstreams: 1 2017_dis_dbsousa.pdf: 5343823 bytes, checksum: a8ff9a4e6104fc12d420f0ad30f9866c (MD5)
Approved for entry into archive by Jairo Viana (jairo@ufc.br) on 2017-11-07T22:59:03Z (GMT) No. of bitstreams: 1 2017_dis_dbsousa.pdf: 5343823 bytes, checksum: a8ff9a4e6104fc12d420f0ad30f9866c (MD5)
Made available in DSpace on 2017-11-07T22:59:03Z (GMT). No. of bitstreams: 1 2017_dis_dbsousa.pdf: 5343823 bytes, checksum: a8ff9a4e6104fc12d420f0ad30f9866c (MD5) Previous issue date: 2017
The present study aims to investigate the chemical potential of Fusarium udum, an endophytic fungus isolated from Chrotalaria paulinea, which is responsible for causing damage to bean planting and species of Chrotalaria. The fungus was cultivated in four distinct culture media: PD (potato-dextrose), PDY (potato-dextrose-yeast), MPD (malt-peptone-dextrose), and Czapek. The culture time was determined by the glucose rate of the culture medium. The ethyl acetate extract from the microorganism cultivated in MPD (25 days) was selected for the pre-liminary chromatographic treatment, and led to the isolation of tyrosol, fusaric acid, and monaspilosin. In another experiment that used the culture media mentioned above, F. udum produced secondary metabolites through different days of incubation (7, 14, 21, 28 days). The chromatographic fractionation of the ethyl acetate extract from the microorganism cultured in PDY (28 days) provided cycle (L-Pro-L-Leu) and triptophol. The micellar extract obtained in this culture was also studied and it supplied the substance adenosine. Usual chromatographic techniques, including liquid-liquid partition, C-18 cartridge chromatography, and high perfor-mance liquid chromatography (HPLC), were used to isolate the secondary metabolites. The structural characterization was conducted by using the spectrometric techniques mass spec-trometry (MS) and nuclear magnetic resonance (NMR) with one and two-dimensional experi-ments and comparison with literature data.
O presente trabalho objetiva a investigação do potencial químico de Fusarium udum, um fungo endofítico isolado de Chrotalaria paulinea, e responsável por causar danos a plantações de feijão e em espécies de Chrotalaria. O fungo foi cultivado em quatro meios de cultura distintos: BD (batata-dextrose), BDL (batata-dextrose-levedura), MPD (malte-peptona-dextrose) e Czapek, sendo o tempo de cultivo determinado pela taxa de glicose do meio. O extrato AcOEt do micro-organismo cultivado em meio MPD (25 dias) foi selecionado para o tratamento cromatográfico preliminar, levando ao isolamento do tirosol, ácido fusárico e monaspilosina. Em um outro experimento, e utilizando os meios de cultivo mencionados, F. udum teve a produção dos metabólitos secundários acompanhada através de diferentes dias de incubação (7, 14, 21, 28 dias). O fracionamento cromatográfico do extrato AcOEt do micro-organismo cultivado em meio BDL (28 dias) forneceu a dicetopiperazina ciclo (L-Pro-L-Leu) e o triptofol. O extrato micelar obtido neste cultivo também foi estudado e forneceu a adenosina. Técnicas cromatográficas usuais, incluindo partição líquido-líquido, cromatografia em cartucho C-18 e cromatografia de alta eficiência (CLAE) foram utilizadas para o isolamento dos metabólitos secundários, enquanto que a caracterização estrutural foi possível através do uso de técnicas espectrométricas utilizando espectrometria de massa (EM) e ressonância magnética nuclear (RMN) com experimentos uni e bidimensionais, além de comparação com dados da literatura.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Abraham, Michael. "Effektivare fordonsdiagnostik över CAN-bussen genom UDS." Thesis, Linköpings universitet, Programvara och system, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-167819.

Повний текст джерела
Анотація:
Cars are getting more technically advanced and more ECUs are being developed that results in increased safety and comfort, and a lower environmental impact. This leads to a complex work to test and verify that all the different ECUs are functioning as intended in various situations. Vehicle diagnostics often requires software from third parties that are often expensive. Syntronic AB are currently using software with a much larger functionality than needed to perform vehicle diagnostics and much of the unneces-sary functionality in the software leads to unnecessarily long runtimes for the program. By studying CAN and UDS and analyzing how they interact, I was able to create a software by systematically developing the software with two interfaces connected to each computer and continuously testing the implementation against the theoretical basis and then finally testing the software in a vehicle. The created software was better suited to the needs of the company and the more functionality-adapted software could perform the same diagnostics faster than the company’s current software. The most used UDS-service by the company could be implemented and the created software enabled more UDS services to be added without modifications of the main program or its features.
Bilar blir allt mer tekniskt avancerade och fler ECU:er har utvecklats som har medfört ökad säkerhet och komfort samt minskad miljöpåverkan. Det resulterar i ett komplext arbete med att testa och verifiera att alla olika ECU:er fungerar som de skall i olika situationer. Fordonsdiagnostik kräver ofta program-varor från olika aktörer där licenserna ofta är dyra. Idag använder Syntronic AB en programvara med en mycket större funktionalitet än de behöver för att utföra fordonsdiagnostik och all denna onödiga funktionalitet i programvaran har medfört onödigt långa körtider. Genom att studera CAN och UDS och genom att analysera hur de samverkar kunde jag skapa en programvara genom att systematiskt utveckla programvaran med två gränssnitt inkopplade i var sin dator och kontinuerligt testa implementationen mot den teoretiska grunden för att slutligen testa programvaran i en bil. Den skapade programvaran var bättre anpassad för företagets behov och den mer funktionalitetsanpassade programvaran kunde utföra samma diagnostik snabbare än företagets nuvarande programvara. Den UDS-tjänst företaget använde mest kunde implementeras och den skapade programvaran konstruerades så att fler UDS-tjänster kunde läggas till utan modifikation av huvudprogrammet eller dess funktioner.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Harms, Dirk-Antonio. "Unfalldatenspeicher (UDS) als möglicher Beitrag zur Verkehrssicherheit im Meinungsbild Jugendlicher und Heranwachsender." [S.l. : s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=968495222.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Magnin, Philippe. "Modélisation de la consolidation des sols non saturés : amélioration, validation, justification du logiciel UDAM." Phd thesis, Ecole Nationale des Ponts et Chaussées, 1995. http://tel.archives-ouvertes.fr/tel-00529471.

Повний текст джерела
Анотація:
La tenue des barrages en remblai homogènes dépend fortement de la variation de teneur en eau du sol compacté, comme le montrent les ruptures d'ouvrages connues. Mais jusqu'à présent il n'existait pas de méthode permettant de relier le coefficient de sécurité à la teneur en eau. Le programme UDAM modélise le comportement de massifs de sols non saturés durant leur construction. Le modèle est composé de deux équations de conservation (eau et air) et d'une équation d'équilibre. Des surfaces d'états sont utilisées pour calculer l'indice des vides et le degré de saturation. La loi de comportement mécanique est celle de DUNCAN. La résolution numérique est composée d'une intégration en temps de type EULER semi-implicite et d'une discrétisation spatiale de type GALERKIN bidimensionnelle Ql. Dans ce mémoire, on abordera le calcul de bornes limitant le pas de temps. Un critère de pas de temps minimum limitant le domaine d'oscillation est calculé par une approche théorique sur la discrétisation. La borne supérieure est calculée pour garantir la stabilité du modèle. Le programme UDAM est ensuite validé sur trois cas de barrages différents (MIRGENBACH, La GANNE, El INFIERNILLO). Une démarche d'identification pour les paramètres de la surface d'état a été proposée. On trouvera aussi un essai de mise en eau des ouvrages. Enfin dans une partie informatique, on trouvera une description des notions intrinsèques du code, un pré-processeur graphique de traitement des résultats ainsi qu'un système de distribution des informations entre les différents outils périphériques.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Weitenberg, Johannes [Verfasser], Reinhart [Akademischer Betreuer] Poprawe, and Thomas [Akademischer Betreuer] Udem. "Transversale Moden in optischen Resonatoren für Anwendungen hoher Laserintensität / Johannes Weitenberg ; Reinhart Poprawe, Thomas Udem." Aachen : Universitätsbibliothek der RWTH Aachen, 2018. http://d-nb.info/1162900423/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Hellquist, Markus, and Sebastian Hagblom. "Design av testmiljö för verifiering av elektroniska styrenheter." Thesis, Linnéuniversitetet, Institutionen för datavetenskap och medieteknik (DM), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-96206.

Повний текст джерела
Анотація:
Examensarbetet syftar till att undersöka möjligheten att expandera befintlig testprocess av elektroniska styrenheter. Hos Volvo Construction Equipment sker verifiering av styrenheter till stor del i riggar som består av större CAN-nätverk och innehåller många komponenter. Antalet riggar begränsas av att de är kostsamma, vilket i sin tur leder till att antalet tester som kan genomföras är begränsat. Målet med arbetet är att undersöka om det är möjligt att skapa en testmiljö som verifierar funktionalitet i en styrenhet, separerad från övriga delar av nätverket. Planen är att testmiljön ska kunna användas som komplement till de befintliga riggarna. Arbetet visar att det är möjligt genom att implementera en testmiljö som kan verifiera funktionalitet hos en separerad styrenhet. Testmiljön ger Volvo möjlighet att utföra fler tester och därmed expandera deras testprocess av elektroniska styrenheter.
The thesis aims to examine the possibility of expanding the existing test process of Electronic Control Units. At Volvo Construction Equipment, verification of control units is mostly done in rigs that include large CAN-networks and contains multiple components. The number of rigs available is limited by their cost, which leads to a limited number of tests that can be made. The thesis is investigating whether it is possible to create a test environment that verifies functionality of an Electronic Control Unit, separated from the network. The purpose of the test environment is to be used as a complement to the existing rigs. The thesis shows that it is possible by implementing a test environment that can verify functionality of a separated control unit. This test environment allows Volvo to perform more tests and thereby expand their test process of Electronic Control Units.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Okamura, Akiko. "The roles of culture, sub-culture and language in scientific research articles." Thesis, University of Newcastle Upon Tyne, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313548.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Sriyotha, Udom [Verfasser]. "Phasengleichgewichte in den Systemen UO₂₊ₓ-LuO₁̦₅(ErO₁̦₅) und LuO₁̦₅-UO₂ (NpO₂, NpO₂₊ₓ), PuO₂, PuO₂₊ₓ / Udom Sriyotha". Karlsruhe : KIT-Bibliothek, 2008. http://d-nb.info/1186086300/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "UDSM"

1

Salaam, Chuo Kikuu cha Dar es. Executive summary: Corporate strategic plan : institutional transformation UDSM-2000. [Dar es Salaam?]: University of Dar es Salaam, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Salaam, Chuo Kikuu cha Dar es. Strategic Development Programme: Institutional transformation "UDSM-2000" : corporate strategic plan. [Dar es Salaam?]: University of Dar es Salaam, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Chuo Kikuu cha Dar es Salaam. Institutional Transformation Programme. UDSM ten years experience of the Institutional Transformation Programme (ITP). Dar es Salaam]: University of Dar es Salaam, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Chuo Kikuu cha Dar es Salaam. UDSM five-year rolling strategic plan, 2008/2009-2012/2013. Dar es Salaam, Tanzania: University of Dar es Salaam, Directorate of Planning and Finance, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Workshop on Progress of Strategic Planning at UDSM for the Period January-June, 2001 (7th 2001 UDSM). Proceedings of the Seventh Workshop on Progress of Strategic Planning at UDSM for the Period January-June 2001: Held on 12th September, 2001 at UDSM main campus. [Dar es Salaam]: University of Dar es Salaam, Institutional Transformation Programme, 2001.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Consultative Workshop on the UDSM Transformation Programme (7th 2000 University of Dar es Salaam). Proceedings of the Seventh Annual Consultative Workshop on the UDSM Transformation Programme: 7th-8th September 2000. [Dar es Salaam]: University of Dar es Salaam, Programme Management Unit, 2001.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

UDSM Investment Forum (2001 Dar es Salaam, Tanzania). UDSM Investment Forum: Investment opportunities at the University of Dar es Salaam : venue, Sheraton Hotel, Dar es Salaam, date, Friday 04th May 2001, Kivukoni Hall. [Dar es Salaam]: The University, 2001.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Consultative Workshop on the UDSM Transformation Programme (11th 2004 University of Dar es Salaam). Proceedings of the 11th Annual Consultative Meeting on the UDSM Transformation Programme held on 8th-9th September 2004 at the University of Dar es Salaam (Nkrumah Hall). [Dar es Salaam]: University of Dar es Salaam, Directorate of Planning and Development, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Salazar, Nicelia Buttén, and Miriam Hinojosa Dieck. Postales UDEM. San Padro Garza García, N.L., México: Universidad de Monterrey, 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Amarzhargal, N. Malchny udam tanaa. Ulaanbaatar: Monkhiĭn usėg, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "UDSM"

1

Lasbouygues, B., Robin Wilson, Nadine Azémard, and Philippe Maurine. "Temperature Dependency in UDSM Process." In Lecture Notes in Computer Science, 693–703. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11556930_71.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lasbouygues, B., R. Wilson, P. Maurine, N. Azémard, and D. Auvergne. "Temperature Dependence in Low Power CMOS UDSM Process." In Lecture Notes in Computer Science, 110–18. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-30205-6_13.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Graf, A. "UDS-D: Die verteilte Datenhaltung für UDS." In GI — 18. Jahrestagung II, 665–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-74135-7_49.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Scheer, August-Wilhelm. "Das Unternehmensdatenmodell UDM." In Übungsbuch Wirtschaftsinformatik, 166–72. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-76346-5_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Levinson, Robert. "UDS: A universal data structure." In Conceptual Structures: Current Practices, 230–50. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/3-540-58328-9_16.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Hartley, W. G., O. Almaini, and S. Foucaud. "UKIDSS UDS Progress and Science Highlights." In Thirty Years of Astronomical Discovery with UKIRT, 309–21. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-7432-2_29.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Vignoli, Giancarlo. "UDS in Voiding Dysfunction Syndrome (VD-S)." In Urodynamics for Urogynecologists, 149–67. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74005-8_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Vignoli, Giancarlo. "UDS in Overactive Bladder Syndrome (OAB-S)." In Urodynamics for Urogynecologists, 131–47. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74005-8_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kumar, Gagan, Raina Bajpai, Basavaraj Teli, Jhumishree Meher, Md Mahtab Rashid, and Birinchi Kumar Sarma. "Management of Fusarium udum Causing Wilt of Pigeon Pea." In Fungal Biology, 191–204. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-35947-8_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Vignoli, Giancarlo. "UDS in Stress Urinary Incontinence Syndrome (SUI-S)." In Urodynamics for Urogynecologists, 93–112. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74005-8_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "UDSM"

1

Saleh, R., D. Overhauser, and S. Taylor. "Full-chip verification of UDSM designs." In the 1998 IEEE/ACM international conference. New York, New York, USA: ACM Press, 1998. http://dx.doi.org/10.1145/288548.289070.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Hui Fu. "Timing signoff uncertainty for UDSM SoC design." In 2003 5th International Conference on ASIC Proceedings (IEEE Cat No 03TH8690) ICASIC-03. IEEE, 2003. http://dx.doi.org/10.1109/icasic.2003.1277503.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Al-Hertani, Hussam, Dhamin Al-Khalili, and Come Rozon. "Gate level static power estimation in UDSM processes." In 2008 International Conference on Microelectronics - ICM. IEEE, 2008. http://dx.doi.org/10.1109/icm.2008.5393838.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Samanta, Jagannath, and Bishnu Prasad De. "Comprehensive analysis of delay in UDSM CMOS circuits." In 2011 International Conference on Electronics, Communication and Computing Technologies (ICECCT). IEEE, 2011. http://dx.doi.org/10.1109/icecct.2011.6077064.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Cayouette, Steve, and Dhamin Al-Khalili. "Static power dissipation in adder circuits: the UDSM domain." In SPIE Europe Microtechnologies for the New Millennium, edited by Teresa Riesgo, Eduardo de la Torre, and Leandro Soares Indrusiak. SPIE, 2009. http://dx.doi.org/10.1117/12.819798.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Soni, U., A. Vidyarthi, and S. Akashe. "Design of High Speed and Leakage Tolerant CMOS Comparator in UDSM Technology." In 2013 Third International Conference on Advanced Computing & Communication Technologies (ACCT 2013). IEEE, 2013. http://dx.doi.org/10.1109/acct.2013.76.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Eun Ju Hwang, Wook Kim, and Young Hwan Kim. "Improving the process variation tolerability of flip-flops for UDSM circuit design." In 2010 11th International Symposium on Quality of Electronic Design (ISQED). IEEE, 2010. http://dx.doi.org/10.1109/isqed.2010.5450488.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Al-Hertani, Hussam, Dhamin Al-Khalili, and Côme Rozon. "A new total static leakage estimation model for UDSM-based transistor stacks." In Microelectronics, MEMS, and Nanotechnology, edited by Alex J. Hariz and Vijay K. Varadan. SPIE, 2007. http://dx.doi.org/10.1117/12.758952.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Singh, Ashish Kumar, Jagannath Samanta, and Jaydeb Bhaumik. "Modified I–V model for delay analysis of UDSM CMOS circuits." In 2012 International Conference on Communications, Devices and Intelligent Systems (CODIS). IEEE, 2012. http://dx.doi.org/10.1109/codis.2012.6422212.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Varma, Richa, Vishesh Dokania, Ankita Sarkar, and Aminul Islam. "MOSFET aspect ratio optimization for minimized transistor mismatch at UDSM technology nodes." In 2015 International Conference on Computer Communication and Informatics (ICCCI). IEEE, 2015. http://dx.doi.org/10.1109/iccci.2015.7218134.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "UDSM"

1

Newell, Matthew R. UNATTENDED DUAL CURRENT MONITOR (UDCM). Office of Scientific and Technical Information (OSTI), April 2020. http://dx.doi.org/10.2172/1608675.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Newell, Matthew R. UDCM Operating Procedure (Limited Functionality prototype). Office of Scientific and Technical Information (OSTI), June 2016. http://dx.doi.org/10.2172/1257123.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Newell, Matthew R. Safeguards Technology Factsheet - Unattended Dual Current Monitor (UDCM). Office of Scientific and Technical Information (OSTI), April 2016. http://dx.doi.org/10.2172/1248116.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Newell, Matthew R. Unattended Dual Current Monitor (UDCM) FY17 Summary Report. Office of Scientific and Technical Information (OSTI), October 2017. http://dx.doi.org/10.2172/1400119.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Jubin, Robert Thomas. UDS Recovery Equipment Installation (AFCI CETE Milestone Report). Office of Scientific and Technical Information (OSTI), June 2009. http://dx.doi.org/10.2172/970894.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Newell, Matthew R. Unattended Dual Current Monitor (UDCM) Unattended Multiplicity Shift Register (UMSR) FY18 Summary Report. Office of Scientific and Technical Information (OSTI), October 2018. http://dx.doi.org/10.2172/1477625.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Newell, Matthew R. Unattended Dual Current Monitor (UDCM) Unattended Multiplicity Shift Register (UMSR) FY19 Summary Report. Office of Scientific and Technical Information (OSTI), September 2019. http://dx.doi.org/10.2172/1569588.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Lindstrom, Jason. Ultra-Deep Drilling Cost Reduction; Design and Fabrication of an Ultra-Deep Drilling Simulator (UDS). Office of Scientific and Technical Information (OSTI), January 2010. http://dx.doi.org/10.2172/1131938.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Abe, K. Production of pi+, pi-, K+, K-, p and pbar in Light (uds), c and b Jets from Z0 Decays. Office of Scientific and Technical Information (OSTI), October 2003. http://dx.doi.org/10.2172/826448.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії