Добірка наукової літератури з теми "Tool forming"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Tool forming".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Tool forming"
Cser, L., M. Geiger, K. Lange, J. A. G. Kals, and M. Hänsel. "Tool Life and Tool Quality in Bulk Metal Forming." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 207, no. 4 (November 1993): 223–39. http://dx.doi.org/10.1243/pime_proc_1993_207_085_02.
Повний текст джерелаMeier, Horst, V. Smukala, O. Dewald, and Jian Zhang. "Two Point Incremental Forming with Two Moving Forming Tools." Key Engineering Materials 344 (July 2007): 599–605. http://dx.doi.org/10.4028/www.scientific.net/kem.344.599.
Повний текст джерелаMizelle, John Christopher, Teresa Tang, Nikta Pirouz, and Lewis A. Wheaton. "Forming Tool Use Representations: A Neurophysiological Investigation into Tool Exposure." Journal of Cognitive Neuroscience 23, no. 10 (October 2011): 2920–34. http://dx.doi.org/10.1162/jocn_a_00004.
Повний текст джерелаSieczkarek, Peter, Lukas Kwiatkowski, A. Erman Tekkaya, Eugen Krebs, Petra Kersting, W. Tillmann, and Jan Herper. "Innovative Tools to Improve Incremental Bulk Forming Processes." Key Engineering Materials 554-557 (June 2013): 1490–97. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1490.
Повний текст джерелаLange, K., L. Cser, M. Geiger, and J. A. G. Kals. "Tool Life and Tool Quality in Bulk Metal Forming." CIRP Annals 41, no. 2 (1992): 667–75. http://dx.doi.org/10.1016/s0007-8506(07)63253-3.
Повний текст джерелаLämsä, Janne, Antti Järvenpää, and Kari Mäntyjärvi. "Designing and Manufacturing of a Flexible Longitudinally Laminated Sandwich Panel Forming Tool." Key Engineering Materials 611-612 (May 2014): 786–93. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.786.
Повний текст джерелаHerrmann, Marius, Florian Böhmermann, Henning Hasselbruch, Bernd Kuhfuss, Oltmann Riemer, Andreas Mehner, and Hans-Werner Zoch. "Forming without Lubricant – Functionalized Tool Surfaces for Dry Forming Applications." Procedia Manufacturing 8 (2017): 533–40. http://dx.doi.org/10.1016/j.promfg.2017.02.068.
Повний текст джерелаAllaoui, S., J. Launay, D. Soulat, and S. Chatel. "Experimental tool of woven reinforcement forming." International Journal of Material Forming 1, S1 (April 2008): 815–18. http://dx.doi.org/10.1007/s12289-008-0260-4.
Повний текст джерелаLamprecht, M., and M. Leonhartsberger. "Tool Stiffness Calculation in Roll Forming." International Journal of Simulation Modelling 20, no. 1 (March 10, 2021): 40–51. http://dx.doi.org/10.2507/ijsimm20-1-539.
Повний текст джерелаQin, Yi. "Forming-tool design innovation and intelligent tool-structure/system concepts." International Journal of Machine Tools and Manufacture 46, no. 11 (September 2006): 1253–60. http://dx.doi.org/10.1016/j.ijmachtools.2006.01.013.
Повний текст джерелаДисертації з теми "Tool forming"
Von, Waldburg Arthur Russell. "Diaphragm control in inflated tool forming of composites." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/31074.
Повний текст джерелаSUNIL, SOORAJ. "Numerical Tool to Simulate Forming of Lamera HybrixTM." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Material och tillverkning, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-47138.
Повний текст джерелаHardell, Jens. "Tribology of hot forming tool and high strength steels." Doctoral thesis, Luleå : Department of Applied Physics and Mechanical Engineering, Division of Machine Elements, Luleå University of Technology, 2009. http://pure.ltu.se/ws/fbspretrieve/3353754.
Повний текст джерелаShankar, Ravi. "Surface reconstruction and tool path strategies for incremental sheet metal forming /." Aachen : Shaker, 2008. http://d-nb.info/989220230/04.
Повний текст джерелаJackson, Kathryn Pamela. "The mechanics of incremental sheet forming." Thesis, University of Cambridge, 2008. https://www.repository.cam.ac.uk/handle/1810/267843.
Повний текст джерелаImbert, Boyd Jose. "Increased Formability and the Effects of the Tool/Sheet Interaction in Electromagnetic Forming of Aluminum Alloy Sheet." Thesis, University of Waterloo, 2005. http://hdl.handle.net/10012/857.
Повний текст джерелаChen, Xuesheng. "Precision cold forming modelling, interfacial thermal parameter investigation and tool design optimisation." Thesis, University of Strathclyde, 2002. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=23751.
Повний текст джерелаW, Lindvall Fredrik. "On tool steel, surface preparation, contact geometry and wear in sheet metal forming." Licentiate thesis, Karlstads universitet, Avdelningen för maskin- och materialteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-8883.
Повний текст джерелаShankar, Ravi [Verfasser]. "Surface Reconstruction and Tool Path Strategies for Incremental Sheet Metal Forming / Ravi Shankar." Aachen : Shaker, 2008. http://d-nb.info/1162792094/34.
Повний текст джерелаHeikkilä, Irma. "The Positive Effect of Nitrogen Alloying of Tool Steels Used in Sheet Metal Forming." Doctoral thesis, Uppsala universitet, Tillämpad materialvetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-198747.
Повний текст джерелаКниги з теми "Tool forming"
Lau, Hok-Chan. An expert system for trimming and forming tool set layout for integrated circuits (IC). [s.l: The Author], 1992.
Знайти повний текст джерелаAdaskin, Anatoliy. Improving the efficiency of tools made of high-speed steels and hard alloys. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1248244.
Повний текст джерелаRituals & icebreakers: Practical tools for forming community. Liguori, MO: Liguori, 1999.
Знайти повний текст джерелаVollertsen, Frank. Micro Metal Forming. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.
Знайти повний текст джерелаChesto, Kathleen O. Rituals and icebreakers: Practical tools for forming community. Kansas City, MO: Sheed & Ward, 1995.
Знайти повний текст джерелаKlocke, Fritz. Manufacturing Processes 4: Forming. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.
Знайти повний текст джерелаNielsen, C. V. Modeling of Thermo-Electro-Mechanical Manufacturing Processes: Applications in Metal Forming and Resistance Welding. London: Springer London, 2013.
Знайти повний текст джерелаInternational Symposium on Electrochemical Machining Technology (9th 2013 Fraunhofer Institut Werkzeugmaschinen und Umformtechnik). International Symposium on ElectroChemical Machining Technology INSECT 2013: Proceedings, November 12-13, 2013, Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz. Edited by Schubert Andreas 1960- and Hackert-Oschätzchen Matthias 1979-. Chemnitz, Germany: Technische Universität Chemnitz, Professorship Micromanufacturing Technnology, 2013.
Знайти повний текст джерелаTerehin, Valeriy, and Viktor Chernyshov. Efficiency and effectiveness of the penitentiary system: assessment and planning. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1079434.
Повний текст джерелаBlazynski, Tadeusz Z. Metal Forming: Tool Profiles and Flow. Palgrave, 2014.
Знайти повний текст джерелаЧастини книг з теми "Tool forming"
Hosseini, Ali, and Hossam A. Kishawy. "Cutting Tool Materials and Tool Wear." In Materials Forming, Machining and Tribology, 31–56. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43902-9_2.
Повний текст джерелаKumar, Kaushik, Divya Zindani, and J. Paulo Davim. "Machine Tool Controls." In Materials Forming, Machining and Tribology, 9–18. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76075-9_2.
Повний текст джерелаNielsen, Chris Valentin, Xiaodan Zhang, Marcel Moghadam, Niels Hansen, and Niels Bay. "Deformation Mechanisms in Tool–Workpiece Asperity Contact in Metal Forming." In Forming the Future, 127–37. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_10.
Повний текст джерелаNadda, Rahul, Chandrakant Kumar Nirala, and Probir Saha. "Tool Wear Compensation in Micro-EDM." In Materials Forming, Machining and Tribology, 185–208. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-3074-2_9.
Повний текст джерелаNgaile, Gracious, and Daniel Santiago. "Enhancing Tool Life by Manipulating the Die Elastic Strain Field During Extrusion." In Forming the Future, 37–50. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_4.
Повний текст джерелаPeng, Shixin, Jie Zhou, Mengmeng Zhang, Kemin Zhang, and Jie Liu. "Research on New Hot Stamping Tool with Low-Cost and High-Efficiency Cooling." In Forming the Future, 2759–66. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_229.
Повний текст джерелаVolpato, Neri, and Tiago Rodrigues Weller. "Tool-Path Optimization in Material Extrusion Additive Manufacturing." In Materials Forming, Machining and Tribology, 465–82. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68024-4_24.
Повний текст джерелаSahoo, Prasanta, and Suman Kalyan Das. "Tribology—A Tool for Mechanical and Industrial Engineering." In Materials Forming, Machining and Tribology, 1–37. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-90487-6_1.
Повний текст джерелаSon, Jongyoun, Gwangyong Shin, Kiyong Lee, Chang-hwan Choi, and Dosik Shim. "High-temperature Properties of Hot-Work Tool Steel (AISI H13) Deposited via Direct Energy Deposition." In Forming the Future, 1665–76. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_140.
Повний текст джерелаKochetkova, Marina, and Mary Frances Shannon. "DNA Triple Helix as a Tool to Regulate Cytokine Gene Expression." In Triple Helix Forming Oligonucleotides, 159–66. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-5177-5_12.
Повний текст джерелаТези доповідей конференцій з теми "Tool forming"
Franco, P., M. Estrems, and F. Faura. "Numerical modelling of tool wear in turning with cemented carbide cutting tools." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729597.
Повний текст джерелаKnauf, Frederik, Gerhard Hirt, Philipp Immich, and Kirsten Bobzin. "Influence Of Tool Geometry, Tool Coating And Process Parameters In Thixoextrusion Of Steel." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729673.
Повний текст джерелаAkkerman, R., M. P. Ubbink, M. B. de Rooij, and R. H. W. ten Thije. "Tool-Ply Friction In Composite Forming." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729658.
Повний текст джерелаTolosana, N., S. Lomov, J. Stüve, and A. Miravete. "Development of a Simulation Tool for 3D Braiding Architectures." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729645.
Повний текст джерелаEriksen, R. S., M. Arentoft, and N. A. Paldan. "Tool Design and Manufacturing for Bulk Forming of Micro Components." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729555.
Повний текст джерелаRobertson, Tom, Biren Prasad, and Ravi Duggirala. "Strategic Tool Design Using Metal Forming Simulation Techniques." In International Conference On Vehicle Structural Mechanics & Cae. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/951128.
Повний текст джерелаJeswiet, J., and A. Ali. "Incremental Single Point Forming." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1847.
Повний текст джерелаErsoy, K., G. Nuernberg, G. Herrmann, and H. Hoffmann. "Advanced Prediction of Tool Wear by Taking the Load History into Consideration." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729594.
Повний текст джерелаRen, Huaqing, Newell Moser, Zixuan Zhang, Kornel F. Ehmann, and Jian Cao. "Effects of Tool Deflection in Accumulated Double-Sided Incremental Forming Regarding Part Geometry." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8839.
Повний текст джерелаBrocail, J., M. Watremez, L. Dubar, and B. Bourouga. "High Speed Machining: A New Approach To Friction Analysis At Tool-Chip Interface." In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729592.
Повний текст джерелаЗвіти організацій з теми "Tool forming"
Tome, Carlos. Polycrystal modeling: a mechanism-based tool for simulating plastic forming of complex metals. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1367815.
Повний текст джерелаKholoshyn, Ihor V., Olga V. Bondarenko, Olena V. Hanchuk, and Iryna M. Varfolomyeyeva. Cloud technologies as a tool of creating Earth Remote Sensing educational resources. [б. в.], July 2020. http://dx.doi.org/10.31812/123456789/3885.
Повний текст джерелаMorkun, Volodymyr S., Сергій Олексійович Семеріков, Svitlana M. Hryshchenko, and Kateryna I. Slovak. Environmental Geo-information Technologies as a Tool of Pre-service Mining Engineer’s Training for Sustainable Development of Mining Industry. CEUR Workshop Proceedings, 2017. http://dx.doi.org/10.31812/0564/730.
Повний текст джерелаModlo, Yevhenii O., та Serhiy O. Semerikov. Xcos on Web як перспективний засіб навчання моделювання технічних об’єктів бакалаврів електромеханіки. [б. в.], серпень 2018. http://dx.doi.org/10.31812/0564/2454.
Повний текст джерелаXiao, Haixiang, Junjun Hou, Min Chen, Weiping Deng, Chuanchen Zhao, Jihong Zhou, and Xiaolu Liu. Eradicating Absolute Poverty in Hunan Province, People’s Republic of China. Asian Development Bank, December 2021. http://dx.doi.org/10.22617/wps210460-2.
Повний текст джерелаTarasenko, Rostyslav O., Svitlana M. Amelina, and Albert A. Azaryan. Features of the use of cloud-based translation systems in the process of forming information competence of translators. [б. в.], September 2019. http://dx.doi.org/10.31812/123456789/3256.
Повний текст джерелаSeginer, Ido, James Jones, Per-Olof Gutman, and Eduardo Vallejos. Optimal Environmental Control for Indeterminate Greenhouse Crops. United States Department of Agriculture, August 1997. http://dx.doi.org/10.32747/1997.7613034.bard.
Повний текст джерелаAbdula, Andrii I., Halyna A. Baluta, Nadiia P. Kozachenko, and Darja A. Kassim. Peculiarities of using of the Moodle test tools in philosophy teaching. [б. в.], July 2020. http://dx.doi.org/10.31812/123456789/3867.
Повний текст джерелаNechypurenko, Pavlo P., and Vladimir N. Soloviev. Using ICT as the Tools of Forming the Senior Pupils’ Research Competencies in the Profile Chemistry Learning of Elective Course “Basics of Quantitative Chemical Analysis”. [б. в.], November 2018. http://dx.doi.org/10.31812/123456789/2659.
Повний текст джерелаAstafieva, Mariia M., Oleksii B. Zhyltsov, and Volodymyr V. Proshkin. E-learning as a mean of forming students' mathematical competence in a research-oriented educational process. [б. в.], July 2020. http://dx.doi.org/10.31812/123456789/3896.
Повний текст джерела