Добірка наукової літератури з теми "TIG-2"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "TIG-2".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "TIG-2"
Kumar, Sujeet, and Anil Kumar Das. "Evaluation of mechanical properties of TiB2-TiO2 ceramic composite coating on AISI 1020 mild steel by TIG cladding." Engineering Research Express 4, no. 1 (March 1, 2022): 015034. http://dx.doi.org/10.1088/2631-8695/ac5ae7.
Повний текст джерелаPatel, Dixit, Suketu Jani, and Darshit Shah. "Effect of Oxide Flux Particle Size on Weld Bead Morphology of Hastelloy C-22." Jurnal Kejuruteraan 34, no. 6 (November 30, 2022): 1077–83. http://dx.doi.org/10.17576/jkukm-2022-34(6)-08.
Повний текст джерелаSönmez, Murat, and Polat Topuz. "Effect of TIG welding parameters in joining grade 2 pure titanium." Materials Testing 63, no. 5 (May 1, 2021): 420–25. http://dx.doi.org/10.1515/mt-2020-0071.
Повний текст джерелаWang, Junhui, Zhijun Wan, Hongwei Zhang, Dong Wu, Yuan Zhang, Yi Wang, Luchang Xiong, and Guoli Wang. "Application of Thermal Insulation Gunite Material to the High Geo-Temperature Roadway." Advances in Civil Engineering 2020 (August 19, 2020): 1–12. http://dx.doi.org/10.1155/2020/8853870.
Повний текст джерелаVaklavas, Christos, Vandana Gupta Abramson, Nancy U. Lin, Minetta C. Liu, Hope S. Rugo, Rita Nanda, Anna Maria Storniolo, et al. "TBCRC 019: An open label, randomized, phase II trial of nanoparticle albumin-bound paclitaxel (nab-PAC) with or without the anti-death receptor 5 (DR5) monoclonal antibody tigatuzumab (TIG) in patients with metastatic triple negative breast cancer (TNBC)." Journal of Clinical Oncology 31, no. 15_suppl (May 20, 2013): 1052. http://dx.doi.org/10.1200/jco.2013.31.15_suppl.1052.
Повний текст джерелаCheniti, Billel, Djamel Miroud, Pavol Hvizdoš, Brahim Belkessa, Richard Sedlák, Naima Ouali, and Djilali Allou. "Comparative Study on the Microstructural and Mechanical Properties of WC-Co/AISI 1020 Steel Brazed Joint Obtained by TIG and Oxyacetylene Process." Diffusion Foundations 18 (September 2018): 41–48. http://dx.doi.org/10.4028/www.scientific.net/df.18.41.
Повний текст джерелаSonar, Tushar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran, and Dhenuvakonda Sivakumar. "Optimization of CA-TIG welding parameters to predict and maximize tensile properties of super alloy 718 sheets for gas turbine applications." Aircraft Engineering and Aerospace Technology 94, no. 5 (January 11, 2022): 806–23. http://dx.doi.org/10.1108/aeat-09-2020-0218.
Повний текст джерелаAtoui, Juliana Abdallah, Daniela Nair Borges Felipucci, Valeria Oliveira Pagnano, Iara Augusta Orsi, Mauro Antonio de Arruda Nobilo, and Osvaldo Luiz Bezzon. "Tensile and Flexural Strength of Commercially Pure Titanium Submitted to Laser and Tungsten Inert Gas Welds." Brazilian Dental Journal 24, no. 6 (December 2013): 630–34. http://dx.doi.org/10.1590/0103-6440201302241.
Повний текст джерелаTseng, Kuang Hung, Yung Chang Chen, and Kuan Lung Chen. "Cr2O3 Flux Assisted TIG Welding of Type 316L Stainless Steel Plates." Applied Mechanics and Materials 121-126 (October 2011): 2592–96. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.2592.
Повний текст джерелаMadicke, H.-H., M. Kiesche, and E. Tilgner. "The welding of steel X2 CrNiMoN 18.12 part 2: TIG welding." Welding International 2, no. 6 (January 1988): 554–57. http://dx.doi.org/10.1080/09507118809447520.
Повний текст джерелаДисертації з теми "TIG-2"
Kelča, Daniel. "Svařování tenkostěnných trubek." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229355.
Повний текст джерелаCarvalho, Sheila Medeiros de. "Estudo da soldabilidade a laser e a TIG do titânio comercialmente puro grau 2 empregado em sistemas pneumáticos de aeronaves." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/97/97134/tde-02102013-112909/.
Повний текст джерелаThe engine bleed air system, also known as pneumatic system, conducts the pressurized hot air from the engine to the environmental systems of aircrafts. In-service failures of the arc welded pneumatic parts have driven further developments of laser beam welding as an alternative method. Here, a fiber laser with 2 kW power had been employed to weld commercial purity titanium alloy tubes with 0.5 wall thickness and 50 mm diameter. For comparison purposes, semiautomatic TIG welding was realized, based on the previous experience of an aircraft company. All the welds were autogenous, bead-on-plate, and under protective argon atmosphere. The chosen parameters speed and laser powers for laser welding were 200 W - 2000 mm/min and 250 W - 300 mm/min. The laser welded tubes presented 1-mm wide weld beads composed by grained ?-Ti. The TIG welded tubes showed 5-mm wide beads composed by acicular ?-Ti grains. These observed differences had been associated to the cooling rate, which is seventy times higher in the laser case. Both laser and TIG welded tubes were cycled 44.000 times in a pneumatic bench at 350 oC without failures or cracks that could break the internal pressure. The condition 200W-2000mm/min presented superior fatigue resistance values compared to other welding conditions, and being similar to the tubes in the unwelded condition. On the other hand, the condition 250W-3000mm/min presented the highest dispersion for the fatigue lives. The microstructural and mechanical results shown that the current laser technology could replace with advantages the arc welding for the joining of the titanium tubes in the aircrafts pneumatic system.
Billotte, Thomas. "Caractérisation et modélisation des structures de solidification en soudage TIG d’alliages austénitiques." Thesis, Université de Lorraine, 2017. http://www.theses.fr/2017LORR0084/document.
Повний текст джерелаToday, industrials want to upgrade their welding numerical simulation knowledge’s in order to be able to guarantee the welded structure integrity. Solidification is the main step of welding process. As soon as the grain selection in welded region is well reproduced by simulation software, mechanical properties and nondestructive test response can be deduced. This work tries to find thermometallurgical phenomena in order to describe the microstructures formation during welding. These mechanisms are used for validating a new solidification model which realizes a thermal calcul post-treatment with a cellular automaton (CAFE_WELD). In this aim, welding experiences were done and characterized with EBSD. These analyses allow following the grain selection into the weld. The refusion effect is clearly seen in the case of multi-pass weld. These results are completed by the fine solidification characterizations on filler metal employed in welding experiences. In this way, the model implementation can be done in order to do numerical simulation of the same experiences. The comparisons between real and numerical experiences show that the physical laws taken into account in CAFE_WELD model are not sufficient to reproduce the microstructural properties occurring in welding
Шовкопляс, Оксана Анатоліївна, Оксана Анатольевна Шовкопляс, Oksana Anatoliivna Shovkoplias, О. В. Соболь та В. М. Береснєв. "Фізико-механічні властивості іонно-плазмових покриттів квазібінарних систем TiB[2]-WB[2] і TiC-WC". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/40810.
Повний текст джерелаWang, Kang. "Pressureless sintering and mechanical properties of TiN-TiB¦2 particulate ceramic composites." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2002. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ65652.pdf.
Повний текст джерелаCaceda, Diaz Patricia, Xxxx Christopher Creighton Cox, and Cano Monica Terrones. "Inglés TI3 - TR06 2 01801." Universidad Peruana de Ciencias Aplicadas (UPC), 2018. http://hdl.handle.net/10757/623339.
Повний текст джерелаAlmeida, Marciano Fabiano de. "Atividade fotocatalítica de compósitos hidrotalcita-TiO 2 impregnados com nanopartículas metálicas e TiO 2 -óxidos mistos de MgZnAl." Universidade Federal de Viçosa, 2015. http://www.locus.ufv.br/handle/123456789/8530.
Повний текст джерелаMade available in DSpace on 2016-09-08T17:11:15Z (GMT). No. of bitstreams: 1 texto completo.pdf: 1835695 bytes, checksum: bf8f63b434564b64b6fde68bc988c9e5 (MD5) Previous issue date: 2015-12-08
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
A utilização do TiO 2 como fotocatalisador apresenta algumas desvantagens como os processos de recombinação elétrons-lacuna, os quais diminuem a sua atividade fotocatalítica; somente ser fotoativado pela radiação na região do UV; e tendência a agregação das suas nanopartículas. Desta forma, este trabalho consistiu-se no preparo de compósitos contendo TiO 2 de forma a obter uma melhoria em suas propriedades funcionais. A atividade fotocatalítica foi significativamente afetada pela quantidade de TiO 2 suportada no hidróxido duplo lamelar de MgAl (hidrotalcita). Várias amostras de fotocatalisadores foram preparadas com diferentes nanopartículas metálicas (Ag, Cu ou Ni). O compósito fotocatalisador mais eficiente foi obtido na forma calcinada, com a relação molar de 2:1:1 (Mg:Al:Ti) e o metal Ag (2%, m/m) sendo denominado por HTC/TiO 2 -Ag(2). Este compósito apresentou aproximadamente 100% de degradação e 85% de mineralização do fenol, em 300 min. Compósitos contendo TiO 2 associado ao óxido de zinco obtido pela calcinação do hidróxido duplo lamelar ternário de MgZnAl também foram preparados com sucesso. Os fotocatalisadores foram avaliados em diferentes razões molares de Zn 2+ /Mg 2+ sendo que o melhor fotocatalisador foi obtido para a razão molar Zn 2+ /Mg 2+ igual a 5% e foi denominado por TiO 2 /MgZnAl-5. Este fotocatalisador removeu aproximadamente 100% de fenol e 80% de COT, em 360 minutos. Os novos compósitos fotocatalisadores preparados neste trabalho apresentaram um sinergismo de efeito ocasionado pelo suporte de hidróxido duplo lamelar, presença das nanopartículas metálicas (Ag, Cu ou Ni) ou óxido de zinco os quais, associados à fotoatividade do TiO 2, resultaram na formação de um compósito com alta capacidade fotocatalítica. Os compósitos apresentaram boa estabilidade após 5 ciclos de reuso, capacidade de recuperação e menor agregação de suas nanopartículas, mostrando assim um potencial promissor para aplicações práticas.
Use of TiO 2 as photocatalyst has some disadvantages such as electron-hole recombination processes which reduces its photocatalytic activity; only be photoactivated by radiation in UV region; and the tendency of aggregation when used as nanopowder. This study consisted in preparing composites containing TiO 2 to obtain an improvement in their functional properties. Photocatalytic activity was affected significantly by the amount of TiO 2 supported on lamellar double hydroxide of MgAl (hydrotalcite). A series of photocatalysts were prepared with different metallic nanoparticles (Ag, Cu or Ni). The most efficient photocatalyst composite was obtained calcined form, molar ratio 2:1:1 (Mg:Al:Ti) and Ag metal (2 wt.%) denominated as HTC/TiO 2 -Ag(2). This composite showed highest efficiency degradation by removing about 100% phenol by analysis via HPLC-DAD and 85% TOC after 300 minutes. Composites containing TiO 2 combined with zinc oxide obtained by the calcination of ternary (MgZnAl) layered double hydroxides were also successfully prepared in this work. The photocatalysts were evaluated at different Zn 2+ /Mg 2+ molar rations and the most efficient photocatalyst was obtained at a Zn 2+ /Mg 2+ equal to 5% (TiO 2 /MgZnAl- 5). This photocatalyst removed approximately 100% phenol and 80% COT after 360 minutes. The new composite photocatalyst prepared in this study showed a synergy effect of the layered double hydroxide support, presence of metal nanoparticles (Ag, Cu or Ni) or zinc oxide associated with photoactivity of TiO 2 , resulting in formation of a composite with high photocatalytic capacity. The composites showed good stability after 5 cycles, reduced agglomeration and ease separation by sedimentation at the end of the processes, thus showing a promising potential for practical applications.
Mario, Romero Ramirez Hugo, Gomez De La Torre Salas Cesar Enrique, Cargol Noguer Josep Jordi, Chullen Galbiati Pier Paolo Eduardo, and Contreras Velez Jorge Julian. "Tix - Arquitectura Y Ciudad 2-AR146-201301." Universidad Peruana de Ciencias Aplicadas (UPC), 2013. http://hdl.handle.net/10757/630170.
Повний текст джерелаMario, Romero Ramirez Hugo, Gomez De La Torre Salas Cesar Enrique, Cargol Noguer Josep Jordi, Chullen Galbiati Pier Paolo Eduardo, and Contreras Velez Jorge Julian. "Tix - Arquitectura Y Ciudad 2-AR146-201302." Universidad Peruana de Ciencias Aplicadas (UPC), 2013. http://hdl.handle.net/10757/630171.
Повний текст джерелаRicardo, Uribe Tueros Pedro, Romero Ramirez Hugo Mario, Cargol Noguer Josep Jordi, and Chullen Galbiati Pier Paolo Eduardo. "Tix - Arquitectura Y Ciudad 2-AR146-201401." Universidad Peruana de Ciencias Aplicadas (UPC), 2014. http://hdl.handle.net/10757/630172.
Повний текст джерелаКниги з теми "TIG-2"
Wang, Du Lu. Tie qi yin ping 2/4. Hong Kong: Cosmos, 2001.
Знайти повний текст джерелаWetterberg, Gunnar. Kanslern: Axel Oxenstierna i sin tid. Del 2. Stockholm: Atlantis, 2001.
Знайти повний текст джерелаBlaque. Dirty DNA 2: 'til death do us part. Jonesboro, GA: G Street Chronicles, 2012.
Знайти повний текст джерелаSehested, Thomas. Norgeshjælpen: Den danske bistand til Norge under 2. Verdenskrig. [København]: Fondet for dansk-norsk samarbejde, 2001.
Знайти повний текст джерелаO-Rgyan-Jigs-Med-Chos-Kyi-Dban-Po. Kun-zang La-may Zhal-lung :The Oral Instruction of Kun-zang La-ma on the Preliminary Practices of Dzog-ch'en Long-ch'en Nying-tig (Nga-gyur Nying-ma) (Part 2 & 3). Diamond Lotus Pub, 1993.
Знайти повний текст джерелаTip, Tip: Phase 2. Ransom Publishing Limited, 2021.
Знайти повний текст джерелаTip, Tip: Phase 2. Ransom Publishing Limited, 2021.
Знайти повний текст джерелаHubbard, R. Glenn. TIF 2, Volume 2. Pearson Education, Limited, 2010.
Знайти повний текст джерела1914-, Wegner Hans J., and Møller Svend Erik, eds. På Wegners tid: Festskrift til Hans J. Wegner, 2. april 1989. [Herning]: Poul Kristensen, 1989.
Знайти повний текст джерелаWitte, Klaus, and Klaus Wachtel. Gal, Eph, Phil, Kol, 1 U. 2 Thess, 1 U. 2 Tim, Tit, Phlm, Hebr. de Gruyter GmbH, Walter, 2014.
Знайти повний текст джерелаЧастини книг з теми "TIG-2"
Blight, J., and R. Rougier. "THOR 2 — Tig Hyperbaric Orbital Robot Second Generation Automatic Hyperbaric Welding System." In The European Oil and Gas Conference, 404. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-010-9844-1_57.
Повний текст джерелаSpittel, M., and T. Spittel. "Ti 2." In Part 2: Non-ferrous Alloys - Light Metals, 527–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13864-5_86.
Повний текст джерелаSpittel, M., and T. Spittel. "Ti 2." In Part 2: Non-ferrous Alloys - Light Metals, 532–36. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13864-5_87.
Повний текст джерелаCobran, Krystle. "Solid Start Tip 2." In The Brave Educator, 25–33. New York : Routledge, 2020.: Eye on Education, 2019. http://dx.doi.org/10.4324/9780429424014-3.
Повний текст джерелаPark, Sung Wan. "Nasal Tip Techniques (2): Bulbous Tip Correction." In State of the Art Rhinoplasty Techniques, 73–115. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-5241-7_4.
Повний текст джерелаVallauri, Dario, Y. López, Bruno DeBenedetti, and Ignazio Amato. "Nanocomposite TiC-TiB2 Powders by SHS through Metastability Approach." In Advances in Science and Technology, 1005–10. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-01-x.1005.
Повний текст джерелаUbic, Rick, Kouros Khamoushi, David Iddles, and Tim Price. "Processing and Dielectric Properties of La(Zn1/2 Ti1/2 )O3 and Nd(Zn1/2 Ti1/2 )O3." In Ceramic Transactions Series, 21–30. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118408186.ch3.
Повний текст джерелаShcherbakov, Vladimir A., Anton V. Phitev, N. V. Sachkova, Fabio A. Deorsola, Dario Vallauri, and Bruno DeBenedetti. "Self-Propagating High-Temperature Synthesis of Dense TiC-TiB2-MeO Ceramics." In Advances in Science and Technology, 1018–23. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-01-x.1018.
Повний текст джерелаGonçalves, João, Helena Soares, Norman L. Eberhardt, Sarah C. R. Lummis, David R. Soto-Pantoja, David D. Roberts, Umadas Maitra, et al. "TIR-Domain-Containing Adapter Molecule 2." In Encyclopedia of Signaling Molecules, 1866. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-0461-4_101368.
Повний текст джерелаSalehi, Sedigheh, Omer Vander Biest, and Jozef Vleugels. "ZrO2-TiN Composites." In Materials Science Forum, 135–40. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-439-1.135.
Повний текст джерелаТези доповідей конференцій з теми "TIG-2"
Zimpel, Ricardo, Lucas Bassaco Nogueira, Inácio Limberger, Natalia Daudt, Cristiano Scheuer, Igor Zanella, and Gustavo Bavaresco Sucharski. "Microestrutura e dureza de revestimento de Fe-Cr-Ni depositados por APS e refundidos por TIG – parte 2: efeito das variáveis da corrente de refusão em regime pulsado." In XI Congresso Nacional de Engenharia Mecânica - CONEM 2022. ABCM, 2022. http://dx.doi.org/10.26678/abcm.conem2022.con22-0028.
Повний текст джерелаOlden, V., R. Aune, G. Ro̸rvik, and O. M. Akselsen. "Hydrogen Pick Up and Diffusion in TIG Welding of Supermartensitic 13% Cr Stainless Steel With Superduplex Wire." In ASME 2005 24th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2005. http://dx.doi.org/10.1115/omae2005-67530.
Повний текст джерелаKochi, Tsutomu, Toshio Kojima, Suemi Hirata, Ichiro Morita, and Katsura Ohwaki. "Corrosion Resistant Cladding by YAG Laser Welding in Underwater Environment." In 10th International Conference on Nuclear Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/icone10-22327.
Повний текст джерелаКорнюшенко, Т. В., Н. Г. Разжигаева, Л. А. Ганзей, Т. А. Гребенникова, Я. Е. Пискарева, and С. Д. Прокопец. "MICROFOSSILS AS EVIDENCE OF TRASFORMATION OF GEOSYSTEMS DURING MEDIEVAL DEVELOPMENT OF SOUTH PRIMORYE (FORTRESS STEKLYANUKHA-2)." In Геосистемы Северо-Восточной Азии. Crossref, 2021. http://dx.doi.org/10.35735/tig.2021.67.97.018.
Повний текст джерелаZhang, Shuang, Hailin Xue, Caixia Liu, Yong Gan, Wei Dong, Xin-Dong Zhang, and Wei-You Chen. "Optical properties of TiO 2 and Mn 0.2 Ti 0.8 O 2 thin films." In Asia-Pacific Optical Communications, edited by Chung-En Zah, Yi Luo, and Shinji Tsuji. SPIE, 2005. http://dx.doi.org/10.1117/12.574847.
Повний текст джерелаAegerter, Michel A., Eliane R. La Serra, Ana C. Martins Rodrigues, George Kordas, and Glenn A. Moore. "Characterization of sol-gel thin films of TiO 2 -PbO, TiO 2 -Bi 2 O 3 and TiO 2 -CeO 2 compositions." In San Dieg - DL Tentative, edited by John D. Mackenzie and Donald R. Ulrich. SPIE, 1990. http://dx.doi.org/10.1117/12.22577.
Повний текст джерелаHorsky, Matej, Peter Nadazdy, Edmund Dobrocka, Dagmar Gregusova, Alena Seifertova, Jan Derer, Jan Fedor, Tomas Scepka, and Boris Hudec. "Electrical properties of Pt/TiO2/Pt and Pt/TiO2/TiN structures grown by atomic layer deposition using TTIP and water." In 2022 14th International Conference on Advanced Semiconductor Devices and Microsystems (ASDAM). IEEE, 2022. http://dx.doi.org/10.1109/asdam55965.2022.9966782.
Повний текст джерелаWalczyk, Ch, T. Schroeder, M. Lukosius, M. Fraschke, A. Fox, D. Wolansky, B. Tillack, and Ch Wenger. "Resistive switching in TiN/HfO2/Ti/TiN MIM devices for future nonvolatile memory applications." In 2009 10th Annual Non-Volatile Memory Technology Symposium (NVMTS 2009). IEEE, 2009. http://dx.doi.org/10.1109/nvmt.2009.5445490.
Повний текст джерелаRogozhin, A. E., I. A. Khorin, V. V. Naumov, A. A. Orlikovsky, V. V. Ovcharov, V. I. Rudakov, and A. G. Vasiliev. "CoSi 2 /TiO 2 /SiO 2 /Si gate structure formation." In International Conference on Micro- and Nano-Electronics 2009, edited by Kamil A. Valiev and Alexander A. Orlikovsky. SPIE, 2009. http://dx.doi.org/10.1117/12.854302.
Повний текст джерелаGahlot, Swati, Amit Kumar Thakur, Vaibhav Kulshrestha, and V. K. Shahi. "Synthesis and characterization of TiO[sub 2] and Ag∕TiO[sub 2] nanostructure." In SOLID STATE PHYSICS: PROCEEDINGS OF THE 57TH DAE SOLID STATE PHYSICS SYMPOSIUM 2012. AIP, 2013. http://dx.doi.org/10.1063/1.4791040.
Повний текст джерелаЗвіти організацій з теми "TIG-2"
Mondal, Kanchan, Rasit Koc, and Chinbay Fan. HVOF Thermal Spray TiC/TiB2 Coatings for AUSC Boiler/Turbine Components for Enhanced Corrosion Protection. Office of Scientific and Technical Information (OSTI), December 2016. http://dx.doi.org/10.2172/1334673.
Повний текст джерелаSmyrl, W. H. Modeling and experimental studies of oxide covered metal surfaces: TiO sub 2 /Ti a model system. Office of Scientific and Technical Information (OSTI), January 1991. http://dx.doi.org/10.2172/5948089.
Повний текст джерелаSmyrl, W. H. Modeling and experimental studies of oxide covered metal surfaces: TiO{sub 2}/Ti a model system. Progress report. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/10107275.
Повний текст джерелаBesmann, T. M. Chemical vapor infiltration of TiB{sub 2} composites. Office of Scientific and Technical Information (OSTI), May 1995. http://dx.doi.org/10.2172/105118.
Повний текст джерелаBesmann, T. M., J. H. Miller, K. C. Cooley, R. A. Lowden, and T. L. Starr. Chemical vapor infiltration of TiB{sub 2} composites. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/10121693.
Повний текст джерелаBesmann, T. M., J. H. Miller, K. C. Cooley, R. A. Lowden, and T. L. Starr. Chemical vapor infiltration of TiB[sub 2] composites. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/6773268.
Повний текст джерелаAas, Randi Wågø, Mikkel Magnus Thørrisen, Hildegunn Sagvaag, Lise Haveraaen, and Åsa Sjøgren. Alkoholbruk og alkoholkultur i en transportbedrift: En case-rapport fra forskningsprosjektet WIRUS. University of Stavanger, 2016. http://dx.doi.org/10.31265/usps.212.
Повний текст джерелаThørrisen, Mikkel Magnus, Hildegunn Sagvaag, Lisebet Skeie Skarpaas, Lise Haveraaen, and Randi Wågø Aas. Alkoholbruk og alkoholkultur i et offentlig myndighetsorgan: En case-rapport fra forskningsprosjektet WIRUS. University of Stavanger, June 2016. http://dx.doi.org/10.31265/usps.214.
Повний текст джерелаAas, Randi Wågø, Lise Haveraaen, Mikkel Magnus Thørrisen, Hildegunn Sagvaag, and Lisebet Skeie Skarpaas. Alkoholbruk og alkoholkultur i et offentlig forvaltningsorgan: En case-rapport fra forskningsprosjektet WIRUS. University of Stavanger, June 2016. http://dx.doi.org/10.31265/usps.215.
Повний текст джерелаHaveraaen, Lise, Randi Wågø Aas, Mikkel Magnus Thørrisen, Hildegunn Sagvaag, and Lisebet Skeie Skarpaas. Alkoholbruk og alkoholkultur i en industribedrift: En case-rapport fra forskningsprosjektet WIRUS. University of Stavanger, June 2016. http://dx.doi.org/10.31265/usps.216.
Повний текст джерела