Добірка наукової літератури з теми "Temperature rate"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Temperature rate".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Temperature rate"

1

Morrison, M. J., and P. B. E. McVetty. "Leaf appearance rate of summer rape." Canadian Journal of Plant Science 71, no. 2 (April 1, 1991): 405–12. http://dx.doi.org/10.4141/cjps91-056.

Повний текст джерела
Анотація:
Leaf appearance rate (LAR) is defined as the slope of the regression of leaf number on time of appearance. LARs were calculated for summer rape using both calendar days (CD) and growing degree days (GDD) as measurements of time. The relationship between the number of leaves and GDD or CD was linear. LARs after emergence were 0.022 leaves GDD−1 or 0.247 leaves d−1. Summer rape was grown in growth cabinets set at different mean temperatures to study the effect of air temperature on LAR. The relationship between leaf number and time was linear. When CD were used as a measure of time, LAR increased as mean temperature increased, while the reverse was true when GDD were used to measure time. Cabinet and field LARs were compared at a field mean temperature of 16.5 °C. Cabinet LARs were 0.021 leaves GDD−1 or 0.22 leaves CD−1 which were similar to those calculated in the field. The linear regression equation describing the relationship between LAR (leaves GDD−1) and mean cabinet temperature was used with field-measured daily mean temperatures and GDD to predict the number of leaves for field conditions. When observed number of leaves were plotted against predicted number of leaves, the resulting slope was not significantly different from one, indicating that the model developed in the growth cabinet can be used to predict LAR in the field. Key words: Leaf appearance rate, Brassica napus, phyllochron
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Morrison, M. J., D. W. Stewart, and P. B. E. McVetty. "Maximum area, expansion rate and duration of summer rape leaves." Canadian Journal of Plant Science 72, no. 1 (January 1, 1992): 117–26. http://dx.doi.org/10.4141/cjps92-012.

Повний текст джерела
Анотація:
The vegetative development phase in summer rape (Brassica napus) is characterized by the appearance and expansion of leaves. The objectives of this research were to examine the maximum individual leaf area (LAmax), leaf expansion rate (LAX) and leaf area duration (LAD) of individual leaves as influenced by leaf position and ambient air temperature. Westar summer rape was grown from seed to maturity in controlled environment chambers set at temperatures ranging from 10 to 25 °C. Plants representing each stage of leaf development were selected at random from the population for leaf area determination. Logistic equations were used to relate the area of individual leaves to Growing Degree Days (GDD). Polynomial regression equations were used to fit curves describing the relationship between LAmax, LAX, LAD and leaf position or air temperature. As the air temperature increased the LAmax increased. LAX increased to a maximum which occurred when LAmax was at its maximum. There were no significant differences for LAX among air temperatures ranging from 13.5 to 22 °C. Mean LAX was 0.21 cm2 GDD−1. There were no significant differences in LAD due to leaf position or air temperature. Mean LAD was 140.1 GDD.Key words: Leaf area, leaf expansion rate, leaf area duration, Brassica napus
Стилі APA, Harvard, Vancouver, ISO та ін.
3

S, Kailash, Karthick Raja A, and Mahesh R. Murugappan S. V. Mangaiyarkarasi M.E. "Measurement of GHT Glucose, Heart Rate, Temperature Using Non-Invasive Method." International Journal of Trend in Scientific Research and Development Volume-3, Issue-3 (April 30, 2019): 135–37. http://dx.doi.org/10.31142/ijtsrd21670.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Fridley, Jason D., and Justin P. Wright. "Temperature accelerates the rate fields become forests." Proceedings of the National Academy of Sciences 115, no. 18 (April 16, 2018): 4702–6. http://dx.doi.org/10.1073/pnas.1716665115.

Повний текст джерела
Анотація:
Secondary succession, the postdisturbance transition of herbaceous to woody-dominated ecosystems, occurs faster at lower latitudes with important ramifications for ecosystem processes. This pattern could be driven by the direct effect of temperature on tree growth; however, an alternative mechanism is tree–herb competition, which may be more intense in more fertile northern soils. We manipulated soil fertility and herbaceous species composition in identical experiments at six sites spanning the Eastern United States (30–43° N) and monitored the growth and survival of four early successional trees. Tree seedling mass 2 years after sowing was strongly associated with site differences in mean growing season temperature, regardless of species or soil treatment. The effect of temperature was twofold: seedlings grew faster in response to warmer site temperatures, but also due to the reduction of competitive interference from the herbaceous community, which was inhibited in warmer sites. Our results suggest that increasing temperatures will promote a faster transition of fields to forests in temperate ecosystems.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mourad, Mohamed Hassan. "Effects of water temperature on the ECG; heart rate and respiratory rate of the eel Anguilla anguilla L." Acta Ichthyologica et Piscatoria 21, no. 1 (June 30, 1991): 81–86. http://dx.doi.org/10.3750/aip1991.21.1.08.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

ROMANUS, TORSTEN. "Sedimentation Rate and Room Temperature." Acta Medica Scandinavica 117, no. 5-6 (April 24, 2009): 535–53. http://dx.doi.org/10.1111/j.0954-6820.1944.tb03973.x.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Alden, Thomas H. "Temperature-dependent strain rate discontinuity." Materials Science and Engineering: A 103, no. 2 (September 1988): 213–21. http://dx.doi.org/10.1016/0025-5416(88)90511-3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Rising, R., A. Keys, E. Ravussin, and C. Bogardus. "Concomitant interindividual variation in body temperature and metabolic rate." American Journal of Physiology-Endocrinology and Metabolism 263, no. 4 (October 1, 1992): E730—E734. http://dx.doi.org/10.1152/ajpendo.1992.263.4.e730.

Повний текст джерела
Анотація:
There is significant variation in metabolic rate in humans, independent of differences in body size, body composition, age, and gender. Although it has been generally held that the normal human "set-point" body temperature is 37 degrees C, these interindividual variations in metabolic rate also suggest possible variations in body temperature. To examine the possibility of correlations between metabolic rate and body temperature, triplicate measurements of oral temperatures were made before and after measurement of 24-h energy expenditure in a respiratory chamber in 23 Pima Indian men. Fasting oral temperatures varied more between individuals than can be attributed to methodological errors or intraindividual variation. Oral temperatures correlated with sleeping (r = 0.80, P < 0.0001), and 24-h (r = 0.48, P < 0.02) metabolic rates adjusted for differences in body size, body composition, and age. Similarly, in the 32 Caucasian men of the Minnesota Semi-Starvation Study, oral temperature correlated with adjusted metabolic rate, and the interindividual differences in body temperature were maintained throughout semistarvation and refeeding. These results suggest that a low body temperature and a low metabolic rate might be two signs of an obesity-prone syndrome in humans.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Ali, Riasat, and Ahmed D. Anjum. "Rectal Temperature, Pulse Rate and Breath Rate in Mules." Pakistan Journal of Biological Sciences 1, no. 4 (September 15, 1998): 271–73. http://dx.doi.org/10.3923/pjbs.1998.271.273.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

O'Steen, S. "Embryonic temperature influences juvenile temperature choice and growth rate in snapping turtles Chelydra serpentina." Journal of Experimental Biology 201, no. 3 (February 1, 1998): 439–49. http://dx.doi.org/10.1242/jeb.201.3.439.

Повний текст джерела
Анотація:
Snapping turtles (Chelydra serpentina) demonstrate temperature-dependent sex determination (TSD): intermediate egg incubation temperatures (23-27 degreesC) produce males, while extreme temperatures produce females. Snapping turtles are also sexually dimorphic: adult males are typically larger than females. Previous researchers hypothesized that male-producing egg temperatures enhanced the growth rate of juvenile turtles, resulting in the adult dimorphism and potentially providing an adaptive benefit for TSD. In reptiles, the choice of ambient temperature can also influence growth. I measured the effect of egg incubation temperature on juvenile growth rate and water temperature choice of C. serpentina. Eggs were incubated in the laboratory at 21.5, 24.5, 27.5 or 30.5 degreesC to produce both sexes, all males, both sexes or all females, respectively. Egg temperature was linearly and negatively correlated with growth rate of both male and female juveniles. Thus, growth was enhanced, but not maximized, by male-producing egg temperatures. Egg temperature was also negatively correlated with juvenile temperature choice such that, on average, turtles from 21.5 degreesC eggs selected 28 degreesC water, while turtles from 30.5 degreesC eggs chose 24.5 degreesC water. Additionally, these temperature choices were highly repeatable, even following a 6 month hibernation period at 7 degreesC. Thus, while male egg temperatures do not directly maximize growth, multiple effects of embryonic temperature may combine to create long-lasting differences in the behavioral physiology of male and female C. serpentina. Such differences could be important to the ecology and evolution of TSD.
Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "Temperature rate"

1

Hsu, Chuan-liang. "Influence of cooling rate on glass transition temperature and starch retrogradation during low temperature storage /." free to MU campus, to others for purchase, 1998. http://wwwlib.umi.com/cr/mo/fullcit?p9924889.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mansfield, Jonathan Mark. "Reaction behaviour from temperature dynamics." Thesis, University of Nottingham, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.339552.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Cook, Frederick Philip. "Characterization of UHMWPE Laminates for High Strain Rate Applications." Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/30849.

Повний текст джерела
Анотація:
The research presented in this thesis represents an effort to characterize the properties of ultra-high molecular weight polyethylene (UHMWPE). As a composite of polymers, the properties of UHMWPE are time-dependent. It is desired by research sponsors to know the properties of the material at high strain rates, in order to simulate the use of these materials in computer models. Properties believed to be significant which are investigated in this research are the tensile properties of lamina and laminates, and the interlaminar shear properties of laminates. The efficacy of using time-temperature superposition to shift tensile properties of the composite is investigated, and a novel apparent shear strength test is proposed and demonstrated. The effects of processing the material at various temperatures and pressures are also investigated.
Master of Science
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tanner, Albert Buck. "Modeling temperature and strain rate history effects in OFHC CU." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/17143.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lodemore, Marion. "The development of temperature and heart rate rhythms in babies." Thesis, University of Leicester, 1993. http://hdl.handle.net/2381/34139.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Chan, Hoi Houng. "The cavitation properties of liquids : temperature and stressing rate effects." Thesis, Swansea University, 2009. https://cronfa.swan.ac.uk/Record/cronfa42968.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Norman, Sven. "The temperature dependence of ectotherm consumption." Thesis, Umeå universitet, Institutionen för ekologi, miljö och geovetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-64098.

Повний текст джерела
Анотація:
The effect of temperature on predator and herbivore consumption is an important factor for predicting the effects of climate warming on ecosystems. The Metabolic Theory of Ecology (MTE) describes the temperature dependence of biological and ecological rates and states that metabolism is the fundamental biological mechanism that governs most observed patterns in ecology. This statement has been criticized empirically for a number of organismal traits and systematic deviations have been found. Here, a meta-analysis is performed on published temperature responses of ectotherm consumption. The mean effect of temperature on consumption was higher than the mean value predicted by proponents of the MTE and was highly variable. Some of this variation is explained by habitat type, where the consumption rates of marine organisms displayed stronger temperature dependence than for terrestrial and freshwater organisms. The frequency distribution of temperature dependencies is right skewed for consumption. Here, this skewness is explained by a methodological artefact as values close to “no effect” are more unlikely to be sampled than others when fitting the Arrhenius equation. In conclusion, the assumptions of the MTE do not hold for rates of consumption and marine organisms display a stronger temperature dependence compared to terrestrial and freshwater organisms.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Amoruso, Kenneth. "Independent control of a molten stream temperature and mass flow rate." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/40008.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Singh, Suniti. "High rate anaerobic treatment of LCFA-containing wastewater at low temperature." Thesis, Paris Est, 2019. http://www.theses.fr/2019PESC2042.

Повний текст джерела
Анотація:
La hausse des prix des carburants et les incitations favorisant le marché des énergies renouvelables poussent le marché mondial de l'eau et les technologies des eaux usées vers la digestion anaérobie. Les gains financiers résultant de la réduction de l'empreinte de l'usine et du transport des boues constituent également des moteurs économiques importants. La croissance efficace des méthanogènes est la clé de la fonctionnalité AD, pour laquelle les températures mésophiles (30-35 ° C) ou thermophiles (48-55 ° C) et pH 6,8-7,2 sont optimales. Le goulot d'étranglement dans la polyvalence de la mise en œuvre de la DA est son inefficacité à des températures plus basses. Comme un énorme morceau de biosphère est en permanence à moins de 5 ° C, le développement du DLTA fournirait une meilleure efficacité énergétique pour le traitement des eaux usées dans les régions tempérées
Fats, oil and grease (FOG) is a significant constituent in numerous wastewaters such as those in dairy industry. The hydrolysis of FOG results in the production of long chain fatty acids (LCFA) which destabilize the anaerobic treatment process due to their physico-chemical and microbial toxicity effects. Harnessing the high methanogenic potential of FOG necessitates effective treatment of high LCFA loads, wherein the feasibility of LCFA treatment at low temperatures has been not investigated up to now. The aim of this thesis was to study the feasibility of high-rate anaerobic treatment of LCFA-rich wastewaters at low ambient temperatures using a dairy wastewater matrix.The screening of mesophilic inocula for treatment of mixed LCFA containing synthetic dairy wastewater (SDW) in batch studies showed that granular sludge inoculum achieved faster and higher methane yields (76-82% of theoretical yield) than the two municipal digestates (1-72%) at both 20 and 10°C. The LCFA degradative capacity in the granular sludge inoculum was attributed to the presence of β-oxidizing bacteria from the family Syntrophaceae (Syntrophus and uncultured taxa), the acetotrophic activity from Methanosaeta and putative syntrophic acetate oxidizing bacteria (SAOB). Continuous high-rate treatment of SDW was found to be feasible in expanded granular sludge bed (EGSB) reactors at 20°C (hydraulic retention time (HRT) 24 h, LCFA loading rate (OLR) 670 mgCOD-LCFA/L·d, 33% COD-LCFA) with a COD removal of 84–91% and methane yield of 44–51%. SDW feeding for longer than two months resulted in LCFA accumulation, which led to granular sludge flotation (36-57%) and disintegration. To counter the LCFA induced granular sludge disintegration and flotation, a novel reactor type, dynamic sludge chamber-fixed film (DSC-FF), was designed and achieved sCOD removal of 87-98% at HRTs from 12-72 h (LCFA loading rate 220-1333 mgCOD-LCFA/L·d) at 20°C. Moreover, even at the 12 h HRT, the unsaturated LCFAs (linoleate and oleate) were treated and only part of saturated LCFAs (stearate, palmitate) remained after treatment in the DSC-FF reactors. An increased methanogenic activity was established in the reactor sludges during reactor runs; evidenced by a higher acetotrophic activity in the granular sludge (from DSC), and a higher hydrogenotrophic activity in the biofilm (from FF) indicating development of distinct metabolic capabilities in the different reactor compartments. High throughput 16S rRNA sequencing showed that the relative abundance of the acetoclastic methanogen, Methanosaeta increased in EGSB reactors when fed with increased LCFA concentrations. The relative abundance of Methanosaeta increased also in the active microbiomes of granules (from DSC) and biofilm (from FF) during the 150-d reactor operation, demonstrating acetoclastic methanogenesis as the predominant methanogenesis pathway for SDW and LCFA degradation at 20°C. Microbial communities with a high β-oxidizing along with high methanogenic activity were developed during SDW treatment in DSC-FF reactors at 20°C. In DSC-FF reactors, the biofilm microbiome (from FF) had a prominent presence of the β-oxidizing bacteria Syntrophus and the hydrogenotrophic methanogen Methanospirillum; in comparison to the presence of the acetogenic bacteria - Syntrophobacter, Desulfobulbus, and Geobacter in the granular sludge microbiome, suggesting a role of these taxa at different trophic levels during LCFA degradation. In summary, this work demonstrated successful inoculum selection at low temperatures (10 and 20°C), and high-rate anaerobic LCFA degradation at 20°C using combined approaches of inoculum mixture and novel reactor design (here, DSC-FF). The key bacterial and archaeal taxa involved in the anaerobic conversion of LCFA to methane at 20°C were also deduced
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Ashton, Mark. "Behaviour of metals as a function of strain-rate and temperature." Thesis, Loughborough University, 1999. https://dspace.lboro.ac.uk/2134/10449.

Повний текст джерела
Анотація:
Five materials, copper (two versions), iron, and armour plate steel (two versions) have been tested at different strain-rates and temperatures. All tests were in compression. The materials were studied to provide experimental data for input into hydrocode models of armour behaviour by the Defence Research Agency, Fort Halstead. A wide selection of metals was examined so that comparisons could be drawn between modelling the behaviour of face centred and body centred cubic metals, and to carry out a broader investigation into how the results obtained were affected by the test methods. Experiments were performed at temperatures from -100°C to 20°C and mean plastic strain-rates from 10-3 to 103 S-l, using a Split Hopkinson Pressure Bar (SHPB) system for high strain-rates and a Hounsfield 50 kN machine for quasistatic conditions. The stress-strain behaviour of the materials as a function of temperature and strain-rate was then determined. The effects of interfacial friction on the measured compreSSlve properties of copper and the armour plate steels have been investigated. Since the coefficient of friction was the critical parameter, ring tests were carried out and the Avitzur analysis applied. In general, the coefficient of friction decreased with increasing strain-rate and temperature. The tested specimen's appearance indicated the same friction trends. Hydrocode modelling of the SHPB system produced corrections to the flow stress, to compensate for interfacial friction, that agree well with those predicted by the Avitzur analysis. Deformed finite element mesh plots analysed in conjunction with barrelled specimens have given a clearer insight into the mechanisms of interfacial friction. The Armstrong-Zerilli constitutive models have been applied to copper, iron and armour plate steel results corrected for thermal softening and specimen-platen interfacial friction. These models have been shown to provide a reasonable description of the materials' behaviour. The research investigation has shown that in order to obtain fundamental stressstrain behaviour of the materials, then corrections must be applied, which can be quite significant. These corrections must take into account the effects of material thermal softening and the specimen-platen interfacial friction.
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Temperature rate"

1

Xiao, Y. Effects of water flow rate and temperature on leaching from creosote-treated wood. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Reedy, Michael Wayne. An approach to low temperature high strain rate superplasticity in aluminum alloy 2090. Monterey, Calif: Naval Postgraduate School, 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Xiao, Y. Effects of water flow rate and temperature on leaching from creosote-treated wood. Madison, Wis: Forest Products Laboratory, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kaddour, A. S. Strain rate and temperature effects on the burst properties of filament wound composite tubes. Manchester: UMIST, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Chemical equilibria in solution: Dependence of rate and equilibrium constants on temperature and pressure. New York: Ellis Horwood/PTR Prentice Hall, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

United States. Agricultural Marketing Service. Food Quality Assurance Branch. Effects of freezing rate, storage temperature, temperature abuse and storage time on sensory, chemical, instron and yield properties of beef roasts: Final report. Beltsville, MD: The Laboratory, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Toivonen, Aki. Stress corrosion crack growth rate measurement in high temperature water using small precracked bend specimens. Espoo [Finland]: VTT Technical Research Centre of Finland, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Erickson, Wayne D. Finite-rate water condensation in combustion-heated wind tunnels. Hampton, Va: Langley Research Center, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

DaCosta, Herbert. Rate constant estimation for thermal reactions: Methods and applications. Hoboken, N.J: Wiley, 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Choi, Sung Rak. Dependency of shear strength on test rate in SiC/BSAS ceramic matrix composite at elevated temperature. [Cleveland, Ohio: NASA Glenn Research Center, 2003.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Temperature rate"

1

Cossins, A. R., and K. Bowler. "Rate compensations and capacity adaptations." In Temperature Biology of Animals, 155–203. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3127-5_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Alt, E., K. Stangl, and H. Theres. "Central Venous Blood Temperature." In Rate Adaptive Cardiac Pacing, 128–36. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-76649-7_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Klostermeier, Dagmar, and Markus G. Rudolph. "Temperature Dependence of Rate Constants." In Biophysical Chemistry, 203–8. Names: Klostermeier, Dagmar, author. | Rudolph, Markus G., author. Title: Biophysical chemistry / Dagmar Klostermeier and Markus G. Rudolph. Description: Boca Raton, FL : CRC Press, Taylor & Francis Group, [2017]: CRC Press, 2018. http://dx.doi.org/10.1201/9781315156910-15.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Brosh, Arieh, Stephen Fennell, Dick Wright, Graham Beneke, and Bruce Young. "Effects of Solar Radiation and Feed Quality on Heart Rate and Heat Balance Parameters in Cattle." In Temperature Regulation, 297–302. Basel: Birkhäuser Basel, 1994. http://dx.doi.org/10.1007/978-3-0348-8491-4_48.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Braun, Jean. "13. Quantitative Constraints on the Rate of Landform Evolution Derived from Low-Temperature Thermochronology." In Low-Temperature Thermochronology:, edited by Peter W. Reiners and Todd A. Ehlers, 351–74. Berlin, Boston: De Gruyter, 2005. http://dx.doi.org/10.1515/9781501509575-015.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Braun, H. "Rheological Rate Type Models Including Temperature History." In Third European Rheology Conference and Golden Jubilee Meeting of the British Society of Rheology, 66–68. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0781-2_29.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kendall, M. J., and C. R. Siviour. "Strain Rate and Temperature Dependence in PVC." In Dynamic Behavior of Materials, Volume 1, 113–20. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00771-7_14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Reti, Tamás, Imre Czinege, Imre Felde, Lino Costa, and Rafael Colás. "On the Temperature Rate Dependent Transformation Processes." In Materials Science Forum, 571–78. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-426-x.571.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Mate, Amol, Shriram Sane, Varsha Karandikar, Dr Suneeta Shriram Sane, and Vinayak Marathe. "Impact of Temperature on Recovery Heart Rate." In Design Science and Innovation, 69–77. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7361-0_8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Sunayama, Hiroyuki, and Masayasu Kawahara. "Oxidation Rate of Magnesia-Carbon Refractory with Aluminum Additive." In High-Temperature Oxidation and Corrosion 2005, 603–8. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-409-x.603.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Temperature rate"

1

Maasilta, I. J., and L. J. Taskinen. "Direct Measurement of Sub-Kelvin Thermal Relaxation Rate in Nanostructures." In LOW TEMPERATURE PHYSICS: 24th International Conference on Low Temperature Physics - LT24. AIP, 2006. http://dx.doi.org/10.1063/1.2355298.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Katagiri, M., T. Nakamura, M. Ohkubo, H. Pressler, H. Takahashi, and M. Nakazawa. "High count rate x-ray detector using a superconducting tunnel junction with current readout method." In LOW TEMPERATURE DETECTORS: Ninth International Workshop on Low Temperature Detectors. American Institute of Physics, 2002. http://dx.doi.org/10.1063/1.1457623.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kolesnichenko, Evgeniy G., and Yuriy E. Gorbachev. "Reaction rates and reaction rate constant conception. One-temperature case." In 28TH INTERNATIONAL SYMPOSIUM ON RAREFIED GAS DYNAMICS 2012. AIP, 2012. http://dx.doi.org/10.1063/1.4769483.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tan, Hui, Dimitry Breus, Wolfgang Hennig, Konstantin Sabourov, Jeffrey W. Collins, William K. Warburton, W. Bertrand Doriese, et al. "High Rate Pulse Processing Algorithms for Microcalorimeters." In THE THIRTEENTH INTERNATIONAL WORKSHOP ON LOW TEMPERATURE DETECTORS—LTD13. AIP, 2009. http://dx.doi.org/10.1063/1.3292337.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

"Effect of Added Molybdenum on Material Properties of Zr2SC MAX Phase Produced by Self-Propagating High Temperature Synthesis." In Explosion Shock Waves and High Strain Rate Phenomena. Materials Research Forum LLC, 2019. http://dx.doi.org/10.21741/9781644900338-14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Chacko, Tessy P., and G. Renuka. "Rainfall Prediction using Soil and Air Temperature in a Tropical Station." In INTERNATIONAL SYMPOSIUM ON RAINFALL RATE AND RADIO WAVE PROPAGATION (ISRR '07). AIP, 2007. http://dx.doi.org/10.1063/1.2767044.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

KUBOTA, N., and H. OKUHARA. "Burning rate temperature sensitivity of HMX propellants." In 22nd Joint Propulsion Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1986. http://dx.doi.org/10.2514/6.1986-1593.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Liu, Kexue, Yanhua Wu, Yan Sun, Yuanzhi Li, and Wenfei Zhou. "The Study of Relation Between Temperature Distribution on Silicon Wafer with Gas Flow Rate and Temperature Ramp Rate." In 2019 China Semiconductor Technology International Conference (CSTIC). IEEE, 2019. http://dx.doi.org/10.1109/cstic.2019.8755715.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Smith, Stephen J., Joe S. Adams, Simon R. Bandler, Regis P. Brekosky, Ari D. Brown, James A. Chervenak, Megan E. Eckart, et al. "Optimizing Transition-Edge Sensor Design for High Count-Rate Applications." In THE THIRTEENTH INTERNATIONAL WORKSHOP ON LOW TEMPERATURE DETECTORS—LTD13. AIP, 2009. http://dx.doi.org/10.1063/1.3292322.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Fox, B. P., K. Simmons-Potter, W. J. Thomes, Jr., D. C. Meister, R. P. Bambha, and D. A. V. Kliner. "Temperature and dose-rate effects in gamma irradiated rare-earth doped fibers." In Optical Engineering + Applications. SPIE, 2008. http://dx.doi.org/10.1117/12.795595.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Temperature rate"

1

Lewinsohn, C. A., R. H. Jones, G. E. Youngblood, and C. H. Henager, Jr. Fiber creep rate and high-temperature properties of SiC/SiC composites. Office of Scientific and Technical Information (OSTI), March 1998. http://dx.doi.org/10.2172/335384.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kim, J. Y., Y. Kishimoto, W. Horton, and T. Tajima. Kinetic resonance damping rate of the toroidal ion temperature gradient mode. Office of Scientific and Technical Information (OSTI), November 1993. http://dx.doi.org/10.2172/10105875.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

George, T. G. High-strain-rate, high-temperature biaxial testing of DOP-26 iridium. Office of Scientific and Technical Information (OSTI), May 1988. http://dx.doi.org/10.2172/5071185.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kim, J. Y., Y. Kishimoto, W. Horton, and T. Tajima. Kinetic resonance damping rate of the toroidal ion temperature gradient mode. Office of Scientific and Technical Information (OSTI), September 1993. http://dx.doi.org/10.2172/10188391.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Peterson, T. Some Calculations Pertaining to Central Calorimeter Cooldown Rate and Temperature Gradients. Office of Scientific and Technical Information (OSTI), August 1987. http://dx.doi.org/10.2172/1030714.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Balajthy, Jon, James Burkart, Joel Christiansen, Melinda Sweany, Darlene Udoni, and Thomas Weber. Modification of a Silicon Photomultiplier for Reduced High Temperature Dark Count Rate. Office of Scientific and Technical Information (OSTI), September 2022. http://dx.doi.org/10.2172/1886439.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wike, L. D. R/D task plan: Response of fish to different simulated temperature rate limits. Office of Scientific and Technical Information (OSTI), January 1991. http://dx.doi.org/10.2172/5915480.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Hunter, Seth, and Wesley Woodham. Evaluation of Thermolytic Hydrogen Generation Rate Models at High-Temperature/High-Hydroxide Regimes. Office of Scientific and Technical Information (OSTI), July 2020. http://dx.doi.org/10.2172/1647016.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Chen, S. R., M. G. Stout, U. F. Kocks, S. R. MacEwen, and A. J. Beaudoin. Constitutive modeling of a 5182 aluminum as a function of strain rate and temperature. Office of Scientific and Technical Information (OSTI), December 1998. http://dx.doi.org/10.2172/307983.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Ciniculk, M. K. Design, microstructure, and high-temperature behavior of silicon nitride sintered with rate-earth oxides. Office of Scientific and Technical Information (OSTI), August 1991. http://dx.doi.org/10.2172/5206386.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії