Добірка наукової літератури з теми "Technologie de fabrication"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Technologie de fabrication".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Technologie de fabrication"
Nouri, Malek. "L’impression 3D en design: pour une future expérience créative en Tunisie." Revista de Ensino em Artes, Moda e Design 7, no. 3 (September 18, 2023): 1–19. http://dx.doi.org/10.5965/25944630732023e3369.
Повний текст джерелаRebeyrolle, Véronique. "La fabrication additive : nouvelle donne pour l’assemblage de combustible ?" Revue Générale Nucléaire, no. 5 (2022): 52–55. http://dx.doi.org/10.1051/rgn/20225052.
Повний текст джерелаSitbon, E. "Fabrication des prothèses mammaires : une industrie de haute technologie." Annales de Chirurgie Plastique Esthétique 50, no. 5 (October 2005): 394–407. http://dx.doi.org/10.1016/j.anplas.2005.08.006.
Повний текст джерелаDalpé, Robert. "La stratégie technologique de Bombardier." Articles 25, no. 2 (April 12, 2005): 167–87. http://dx.doi.org/10.7202/056091ar.
Повний текст джерелаHamza-Chaffai, A. "Caractérisation rhéologique d'un lait gélifié chocolaté : optimisation de la technologie de fabrication." Le Lait 70, no. 2 (1990): 155–67. http://dx.doi.org/10.1051/lait:1990214.
Повний текст джерелаTap, H., R. P. Tan, O. Bernal, P.-F. Calmon, C. Rouabhi, C. Capello, P. Bourdeu d'Aguerre, F. Gessinn, and M. Respaud. "De la conception à la fabrication de circuits intégrés en technologie CMOS." J3eA 18 (2019): 1019. http://dx.doi.org/10.1051/j3ea/20191019.
Повний текст джерелаBoismenu, Gérard, Robert Dalpé, and Graciela Ducatenseiler. "Le transfert technologique: importation et formes d'accès." Retard et limitations 30, no. 3 (April 12, 2005): 351–74. http://dx.doi.org/10.7202/056468ar.
Повний текст джерелаCamaraa, M., N. Loganathan, and A. Fischer. "Technologie additive : Impression de matériaux par jet d’encre pour l’électronique imprimée." J3eA 21 (2022): 1002. http://dx.doi.org/10.1051/j3ea/20221002.
Повний текст джерелаTakoudjou Nimpa, Alain, Jean-Paul Tchankam, and Fabrice Parfait Azebaze Kenfack. "Efficience des PME agro-industrielles au Cameroun : une estimation par la méthode Data Envelopment Analysis (DEA)." Management & Sciences Sociales N° 35, no. 2 (December 13, 2023): 58–73. http://dx.doi.org/10.3917/mss.035.0058.
Повний текст джерелаPomerleaul, L., G. Picard, C. Villeneuve, and J. Lapointe. "119. Transfert d'une technologie de salage pour la fabrication de la morue légèrement salée séchée." Canadian Institute of Food Science and Technology Journal 22, no. 4 (October 1989): 418. http://dx.doi.org/10.1016/s0315-5463(89)70554-x.
Повний текст джерелаДисертації з теми "Technologie de fabrication"
Langlois, Pierre L. "Développement d'un procédé de fabrication de transistors en technologie MESFET." Mémoire, Université de Sherbrooke, 2004. http://savoirs.usherbrooke.ca/handle/11143/1232.
Повний текст джерелаLACHAMP, LAURENCE. "Developpement d'une nouvelle technologie de fabrication de formes pharmaceutiques orodispersibles." Clermont-Ferrand 1, 2001. http://www.theses.fr/2001CLF1PP01.
Повний текст джерелаLanglois, Pierre L. "Développement d'un procédé de fabrication de transistors en technologie MESFET." Sherbrooke : Université de Sherbrooke, 2004.
Знайти повний текст джерелаVayre, Benjamin. "Conception pour la fabrication additive, application à la technologie EBM." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENI096/document.
Повний текст джерелаNowadays, the use of Additive Manufacturing processes keeps growing in the industry. Among the numerous kinds of AM processes, metallic additive manufacturing processes, and metallic Additive Layer Manufacturing in particular, are the most interesting from a mechanical designer point of view. Several research studies have been conducted on the topic of Design For Additive Manufacturing, mostly discussing the choice of AM processes or presenting the redesign of parts. There is no specific design methodology for ALM processes that takes their specificities into account.During this PhD thesis, the changes that ALM processes bring to the design space were investigated. The designer has the opportunity to easily manufacture thin parts, complex parts, lattice structures or mechanisms that don't need any assembly. These processes also have specific manufacturing constraints compared to conventional processes. The heat dissipation is the most important factor since it can cause distortions and porosities. Powder removal, surface and geometrical quality also need to be considered during design. A specific design for additive manufacturing methodology is necessary to take these changes into account.This work focuses on the Electron Beam Manufacturing process. Experiments were conducted and analyzed to assess the manufacturability regarding the thermal phenomena (during melting), the powder removal and the quality of the parts produced by EBM. The impact of the part geometry on manufacturing duration and manufacturing cost was also established.In order to use allow designers to use these pieces of information, we suggested a designing methodology. From the requirements of the parts, one or several parts are generated by the designer or by using topological optimization tools. The orientation of the part inside the manufacturing space is set before designing a refined parametric geometry. This parametric geometry is optimized in order to meet the user requirements as well as the EBM requirements. The last step is the modification of the geometry to comply with the finishing operations (machining allowances for example) and the placement of supports, if needed. This methodology was illustrated with the redesign of two example parts and showed important mass savings from the parts (while meeting user and process requirements).The prospects discovered and highlighted during this work, some of which were preliminary investigated, are presented in a specific chapter
Fazan, Pierre-Christophe. "Fabrication et caractérisation de couches diélectriques minces utilisées en technologie MOS /." [S.l.] : [s.n.], 1988. http://library.epfl.ch/theses/?nr=720.
Повний текст джерелаWindenberger, Pierre. "Aspects actuels de la technologie d'obtention des extraits secs." Strasbourg 1, 1985. http://www.theses.fr/1985STR10469.
Повний текст джерелаHui, Chan. "Renforcement textile basé sur technologie textile avancée pour la fabrication de composite." Thesis, Lille, 2021. http://www.theses.fr/2021LILUI018.
Повний текст джерелаThree-dimensional (3D) laminated composites are increasingly used in different industrial areas. Their mechanical characteristics are advantageous, in particular by their better through-the-thickness strength and stiffness. Tufting is an ongoing technology, which not only adapts to various materials but also easy to achieve various patterns and shapes. This thesis is dedicated to the development of tubular assembly composite by tufting technology, the analysis of the influence of tufting parameters on mechanical performance by the plate assembly composite instead of the tubular assembly is to simplify the experimental study. In addition to the shear properties of the tufted preform and the tufted composite are introduced, the degradation behaviours of tufting thread are also studied. Then,an improvement tufting mechanism is proposed. The configurations of 3D tufted products have been designed and the significant parameters can be adjusted on the home-designed tufting device by GEMTEX. The influence of tufting density on Mode II in-plane shear properties of the tufted preform and the composite promised to the optimisation of the tufting process. Tensile test and the image-observation methods of tufting thread are carried out to determine the degradation behaviours, meanwhile to improve a novel tufting mechanism. Moreover, in order to discuss the tubular assembly, the tests on the plat assembly are carried out. These works open up the development of the new applications under this assembly technology
Mourched, Bachar. "Fabrication d'une sonde pour le champ proche optique en technologie sol-gel." Thesis, Montpellier 2, 2012. http://www.theses.fr/2013MON20008/document.
Повний текст джерела.The use of near-field optical microscopy SNOM is still very limited due to difficulties in instrumental work. The probe is the heart of the microscope and control its use (removal of optical settings number) is the technique key to access this method to a larger number of users. This thesis work is realized in the context of a project to achieve a concept proof for an innovative probe organic / inorganic hybrid material, lever type, incorporating an optical function. In the first part, the history of microscopy and the principle of the optical near field are described in a literature study. Then, the various commercial probes of optical fiber or cantilever type, with aperture or apertureless, or otherwise, their advantages and disadvantages, their manufacturing techniques and the main materials used are presented. Based on this literature study, we propose a new probe full tip hybrid material that combines the advantages of each type of probe. The choice reasons of the hybrid material as base material of the probe and its characteristics are also presented in this part. In the second part we detail the manufacturing process of the material (synthesis) as well as each step role in this process and changes made in response to changes in the synthesis parameters. Characterization of this material is also carried out in this part by measuring its refractive index and its Young's modulus. The third part is devoted to the determination of the probe dimensions to maximize the optical transmission and collection power based on a theoretical study through simulations. Several parameters effect on the light propagation in the probe is also studied (length, width, thickness and stiffness of the lever and aperture towards the end of the tip). The fourth part is dedicated to the probe achievement in hybrid material and associated mechanical and optical characterizations. It presents the manufacturing optimized process of optical probes coupling masking defining method probes and releasing method by reactive ion etching and etching xenon fluoride "DRIE + XeF2". Using this process, optical waveguides were realized and characterized for the determination of optical losses and therefore the absorption coefficient of the developed hybrid material. The conclusion presents open perspectives as part of a larger project
Anciaux, Didier. "Etude d'agencement spatial dans un atelier de production selon le concept de technologie de groupe." Metz, 1990. http://docnum.univ-lorraine.fr/public/UPV-M/Theses/1990/Anciaux.Didier.SMZ902.pdf.
Повний текст джерелаLegha, Ahmad. "Transfert de tolérances géométriques en fabrication : validation de modèles." Chambéry, 2005. http://www.theses.fr/2005CHAMS038.
Повний текст джерелаIn a first part, a presentation of the models of transfer of dimensions and tolerances of Design Office (DO) and manufacture are treated. In a second phase, the problems of transfer of tolerances in manufacture in 3D are treated with a new method being based on graphic tools such as the graphs of manufacture and the variations fields. This work is validated numerically by an example presented in a third part. Lastly, a statistical analysis of the measurements obtained on the series of parts carried out made it possible on the one hand to validate assumptions of composition of statistical laws of distribution, and to check on the other hand, the degree of correlation between the measured components of variation. The tools developed during this PHD, thus allow, treating the phase of industrialization of a product in 3D since the design drawing till the validation of the range of machining
Книги з теми "Technologie de fabrication"
Daiber, Robert A. Technologie de la fabrication. Montréal: Chenelière/McGraw-Hill, 2003.
Знайти повний текст джерелаR, Baldwin John. L' adoption de la technologie au Canada et aux États-Unis. Ottawa, Ont: Direction des études analytiques, Statistique Canada, 1998.
Знайти повний текст джерелаZant, Peter Van. Microchip fabrication: A practicalguide to semiconductor processing. 2nd ed. New York: McGraw-Hill, 1990.
Знайти повний текст джерелаZant, Peter Van. Microchip fabrication: A practical guide to semiconductor processing. 2nd ed. New York: McGraw-Hill, 1990.
Знайти повний текст джерелаMicrochip fabrication: A practical guide to semiconductor processing. 5th ed. New York: McGraw-Hill, 2004.
Знайти повний текст джерелаZant, Peter Van. Microchip fabrication: A practical guide to semiconductor processing. 3rd ed. New York: McGraw-Hill, 1997.
Знайти повний текст джерелаSabatier, Guillaume. Manuel de technologie me canique. Paris: Dunod, 2006.
Знайти повний текст джерелаR, Baldwin John. L' utilisation de la technologie, la formation et les connaissances spécifiques dans les établissements de fabrication. Ottawa, Ont: Statistique Canada, 1995.
Знайти повний текст джерелаR, Baldwin John. Impact de l'adoption des technologies de l'information et des communications de pointe sur la performance des entreprises du secteur de la fabrication au Canada. Ottawa, Ont: Direction des études analytiques, Statistique Canada, 2001.
Знайти повний текст джерела1952-, Sabourin David, Statistics Canada. Micro-Economic Analysis Division., and Statistique Canada. Division de l'analyse micro-économique., eds. Technology adoption in Canadian manufacturing =: Adoption de la technologie dans le secteur de la fabrication au Canada. Ottawa, Ont: Industry, Science and Technology Canada = Industrie, sciences et technologie Canada, 1995.
Знайти повний текст джерелаЧастини книг з теми "Technologie de fabrication"
Karmakar, Ayan, and Kamaljeet Singh. "Fabrication Technologies." In Si-RF Technology, 11–18. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8051-8_2.
Повний текст джерелаDa Vià, Cinzia, Gian-Franco Dalla Betta, and Sherwood Parker. "Fabrication Technologies." In Radiation Sensors with Three-Dimensional Electrodes, 93–118. Boca Raton, FL : CRC Press, [2019] | Series: Series in sensors: CRC Press, 2019. http://dx.doi.org/10.1201/9780429055324-5.
Повний текст джерелаGatzen, Hans H., Volker Saile, and Jürg Leuthold. "Deposition Technologies." In Micro and Nano Fabrication, 65–203. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44395-8_3.
Повний текст джерелаGatzen, Hans H., Volker Saile, and Jürg Leuthold. "Etching Technologies." In Micro and Nano Fabrication, 205–72. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44395-8_4.
Повний текст джерелаTanenbaum, Joshua G., and Karen Tanenbaum. "Fabricating Futures: Envisioning Scenarios for Home Fabrication Technology." In Creativity in the Digital Age, 193–221. London: Springer London, 2015. http://dx.doi.org/10.1007/978-1-4471-6681-8_11.
Повний текст джерелаGatzen, Hans H., Volker Saile, and Jürg Leuthold. "Vacuum Technology." In Micro and Nano Fabrication, 7–63. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44395-8_2.
Повний текст джерелаBitzer, Tom. "Sandwich fabrication." In Honeycomb Technology, 80–97. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5856-5_5.
Повний текст джерелаDaneluzzo, Mirko, and Michele Daneluzzo. "Reinventing Staircases for Thermoplastic Additive Manufacturing." In Proceedings of the 2021 DigitalFUTURES, 349–58. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5983-6_32.
Повний текст джерелаCantor, Robin, and Frank Ludwig. "SQUID Fabrication Technology." In The SQUID Handbook, 93–125. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527603646.ch3.
Повний текст джерелаBhargava, Cherry, and Gaurav Mani Khanal. "IC Fabrication Technology." In Basic VLSI Design Technology, 91–112. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003337300-2.
Повний текст джерелаТези доповідей конференцій з теми "Technologie de fabrication"
Catros, S. "A quoi servent les Bio-Imprimantes 3D ?" In 66ème Congrès de la SFCO. Les Ulis, France: EDP Sciences, 2020. http://dx.doi.org/10.1051/sfco/20206601012.
Повний текст джерелаNguyen, Nam-Trung, and Patrick Abgrall. "Fabrication of Nanochannels in Silicon and Polymers." In ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer. ASMEDC, 2008. http://dx.doi.org/10.1115/mnht2008-52063.
Повний текст джерелаPollicove, Harvey. "The Center for Optics Manufacturing." In Optical Fabrication and Testing. Washington, D.C.: Optica Publishing Group, 1996. http://dx.doi.org/10.1364/oft.1996.owe.1.
Повний текст джерелаDetrio, John A. "Optics Standards." In Optical Fabrication and Testing. Washington, D.C.: Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oft.1980.fthd3.
Повний текст джерелаCerqua-Richardson, K. A., S. L. Schmidt, and J. Vakiner. "Subsurface Damage Measurements of Opticam-generated Infrared Materials." In Optical Fabrication and Testing. Washington, D.C.: Optica Publishing Group, 1994. http://dx.doi.org/10.1364/oft.1994.omd5.
Повний текст джерелаKlocke, Volker, and Thomas Gesang. "Nanorobotics for micro production technology." In Photonics Fabrication Europe, edited by Valerio Pruneri, Robert P. Dahlgren, and Gregory M. Sanger. SPIE, 2003. http://dx.doi.org/10.1117/12.469152.
Повний текст джерелаStahl, H. Philip. "Mirror Technology Roadmap." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/oft.2006.ofma4.
Повний текст джерела"Fabrication technologies." In Conference on Electron Devices, 2005 Spanish. IEEE, 2005. http://dx.doi.org/10.1109/sced.2005.1504470.
Повний текст джерелаLambeck, Paul V., and Kerstin Worhoff. "SiON technology for integrated optical sensors." In Photonics Fabrication Europe, edited by Giancarlo C. Righini. SPIE, 2003. http://dx.doi.org/10.1117/12.473582.
Повний текст джерелаSakarya, Serhat, Gleb V. Vdovin, and Pasqualina M. Sarro. "Fabrication technology for micromachined spatial light modulators." In Photonics Fabrication Europe, edited by Giancarlo C. Righini. SPIE, 2003. http://dx.doi.org/10.1117/12.472009.
Повний текст джерелаЗвіти організацій з теми "Technologie de fabrication"
Blaedel, K. L. Fabrication Technology. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10194530.
Повний текст джерелаPatel, Yusef. File to Factory: A case study of automated prefabrication house-building methods for small-to-medium enterprises. Unitec ePress, December 2017. http://dx.doi.org/10.34074/ocds.0823.
Повний текст джерелаDavis, B., and J. Hryn. Innovative forming and fabrication technologies : new opportunities. Office of Scientific and Technical Information (OSTI), January 2008. http://dx.doi.org/10.2172/924692.
Повний текст джерелаDIMOS, DUANE B., MICHAEL S. OLIVER, and M. ERIC SCHLIENGER. System of Labs Direct Fabrication Technology. Office of Scientific and Technical Information (OSTI), November 1999. http://dx.doi.org/10.2172/14929.
Повний текст джерелаML Hamilton, DS Gelles, RJ Lobsinger, MM Paxton, and WF Brown. Fabrication technology for ODS Alloy MA957. Office of Scientific and Technical Information (OSTI), March 2000. http://dx.doi.org/10.2172/752167.
Повний текст джерелаRiccardella, Scott, and Jason Van Velsor. PR-335-173844-R01 NDE Crack Depth Sizing Performance Validation for Multiple UT Techniques. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), May 2020. http://dx.doi.org/10.55274/r0011676.
Повний текст джерелаJamison, G. M., and L. A. Domeier. Composite fabrication via resin transfer molding technology. Office of Scientific and Technical Information (OSTI), April 1996. http://dx.doi.org/10.2172/239320.
Повний текст джерелаSimpson, Robert E., and John Ohlhausen. Advanced Technology Anti-G Suit (ATAGS) Fabrication. Fort Belvoir, VA: Defense Technical Information Center, December 1990. http://dx.doi.org/10.21236/adb156796.
Повний текст джерелаGrote, Christopher John. Assessment of the Viability of Scaled Annular Pellet Fabrication Technologies. Office of Scientific and Technical Information (OSTI), July 2019. http://dx.doi.org/10.2172/1545725.
Повний текст джерелаKryder, M. H., M. Alex, C. L. Bauer, R. O. Campbell, and D. W. Greve. Design and Fabrication of Submicron Magnetic Bubble Device Technology. Fort Belvoir, VA: Defense Technical Information Center, October 1986. http://dx.doi.org/10.21236/ada174621.
Повний текст джерела