Готові списки джерел за темами / Technological quality assurance

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій

Добірка наукової літератури з теми "Technological quality assurance"

Автор: Grafiati

Опубліковано: 30 травня 2022

Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Technological quality assurance".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Technological quality assurance"

Medar, A. V. "Technological Quality Assurance of Assembling." Izvestiya MGTU MAMI 2, no. 2 (January 20, 2008): 295–302. http://dx.doi.org/10.17816/2074-0530-69854.

Повний текст джерела

Анотація:

The paper offers the concept of system examination of product-technology-equipment precision interaction. This concept is intended to develop a general methodology of technological object creation. It includes the sections of precision analysis of output accuracy parameter configuration for assembly and technological process and assembly equipment synthesis.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kuzin, V. V., S. Yu Fedorov, and S. N. Grigor’ev. "Tribological Aspect in Technological Assurance of Ceramic Component Quality." Refractories and Industrial Ceramics 60, no. 3 (September 2019): 280–83. http://dx.doi.org/10.1007/s11148-019-00353-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bwambok, David K., Noureen Siraj, Samantha Macchi, Nathaniel E. Larm, Gary A. Baker, Rocío L. Pérez, Caitlan E. Ayala, et al. "QCM Sensor Arrays, Electroanalytical Techniques and NIR Spectroscopy Coupled to Multivariate Analysis for Quality Assessment of Food Products, Raw Materials, Ingredients and Foodborne Pathogen Detection: Challenges and Breakthroughs." Sensors 20, no. 23 (December 7, 2020): 6982. http://dx.doi.org/10.3390/s20236982.

Повний текст джерела

Анотація:

Quality checks, assessments, and the assurance of food products, raw materials, and food ingredients is critically important to ensure the safeguard of foods of high quality for safety and public health. Nevertheless, quality checks, assessments, and the assurance of food products along distribution and supply chains is impacted by various challenges. For instance, the development of portable, sensitive, low-cost, and robust instrumentation that is capable of real-time, accurate, and sensitive analysis, quality checks, assessments, and the assurance of food products in the field and/or in the production line in a food manufacturing industry is a major technological and analytical challenge. Other significant challenges include analytical method development, method validation strategies, and the non-availability of reference materials and/or standards for emerging food contaminants. The simplicity, portability, non-invasive, non-destructive properties, and low-cost of NIR spectrometers, make them appealing and desirable instruments of choice for rapid quality checks, assessments and assurances of food products, raw materials, and ingredients. This review article surveys literature and examines current challenges and breakthroughs in quality checks and the assessment of a variety of food products, raw materials, and ingredients. Specifically, recent technological innovations and notable advances in quartz crystal microbalances (QCM), electroanalytical techniques, and near infrared (NIR) spectroscopic instrument development in the quality assessment of selected food products, and the analysis of food raw materials and ingredients for foodborne pathogen detection between January 2019 and July 2020 are highlighted. In addition, chemometric approaches and multivariate analyses of spectral data for NIR instrumental calibration and sample analyses for quality assessments and assurances of selected food products and electrochemical methods for foodborne pathogen detection are discussed. Moreover, this review provides insight into the future trajectory of innovative technological developments in QCM, electroanalytical techniques, NIR spectroscopy, and multivariate analyses relating to general applications for the quality assessment of food products.

Стилі APA, Harvard, Vancouver, ISO та ін.

Суслов, Анатолий, and Anatoliy Suslov. "Design-technological support of quality and competitive ability of engineering products." Science intensive technologies in mechanical engineering 2, no. 7 (July 20, 2017): 25–28. http://dx.doi.org/10.12737/article_595256f1b41d16.38352795.

Повний текст джерела

Анотація:

The solution of the problem of the assurance of competitive ability and quality of engineering products during their design and manufacturing is stated. The dependence for the definition of a complex factor of engineering product competitive ability is shown. The concept of life optimum is given. The structural procedures for the solution of problems of a designer and technologist for the assurance of engineering product quality are shown.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kuzin, V. V., S. Yu Fedorov, and S. N. Grigor'ev. "Tribological aspect in the technological quality assurance of ceramic parts." NOVYE OGNEUPORY (NEW REFRACTORIES) 1, no. 5 (October 27, 2019): 122–26. http://dx.doi.org/10.17073/1683-4518-2019-5-122-126.

Повний текст джерела

Анотація:

It was established that the parameters of the grinding mode of Al2O3--TiC-ceramics significantly affect their tribological characteristics, the intensification of the regime leads to an increase in the tangential force and friction coefficient, the width of the friction track and the width of the wear area. Using the identified interrelations, technological recommendations for rationing the quality of ceramic parts at the design stage, which increase the operational reliability of ceramic products, have been developed.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zawada-Tomkiewicz, Anna, and Izabela Wierucka. "Technological quality assurance methods on the example of a thread." Mechanik, no. 8-9 (September 2015): 727/515–727/523. http://dx.doi.org/10.17814/mechanik.2015.8-9.463.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Федонин, Олег, Oleg Fedonin, Анатолий Суслов, Anatoliy Suslov, Евгений Польский, and Evgeniy Polskiy. "Science intensive technology of quality increase in machinery assembly units at life cycle stage." Science intensive technologies in mechanical engineering 1, no. 5 (April 30, 2016): 34–41. http://dx.doi.org/10.12737/18713.

Повний текст джерела

Анотація:

The procedure of continuous computer support in technological assurance of assembly unit quality on the basis of the automated subsystems of a dimensional analysis fulfillment for the main stages of a life cycle allowing the analysis of technological, assembly and operation ties in machinery structure is shown. The scientific approaches to technological assurance of machinery unit life on the basis of the analysis of dimension ties arising at the basic stages of a product life cycle are stated. At the heart of investigations is laid the realization of a continuous analysis of dimensioning ties at the basic stages of a life cycle (designing, manufacturing, assembly and service of a product) combined into a general automated subsystem of engineering computations (MES- system) for assurance of machine life stated in design requirements.

Стилі APA, Harvard, Vancouver, ISO та ін.

Vela-Valido, Jennifer. "Translation quality management in the AI Age. New technologies to perform translation quality assurance operations." Tradumàtica: tecnologies de la traducció, no. 19 (December 31, 2021): 93–111. http://dx.doi.org/10.5565/rev/tradumatica.285.

Повний текст джерела

Анотація:

This article presents a selection of some of the latest technologies to perform translation quality management operations such as quality assurance and translation quality assessment using artificial intelligence and machine learning; it also discusses the impact of these technological advances in the latest academic research trends and the translation industry.

Стилі APA, Harvard, Vancouver, ISO та ін.

Markov, Andrei, Vyacheslav Nekrasov, Jian Su, Azhar Salman, Sergei Gayst та Mikhail Andreev. "Технологическое обеспечение качества поверхностного слоя стекловолоконных композитов при концевом фрезеровании". Metal Working and Material Science 22, № 4 (8 грудня 2020): 31–40. http://dx.doi.org/10.17212/1994-6309-2020-22.4-31-40.

Повний текст джерела

Анотація:

Introduction. Today fiberglass is one of the most common composite materials. Therefore, its mechanical processing continues to be the subject of many studies. In many scientific publications, the influence of cutting modes and structural and geometric parameters of the tool on the roughness of the machined surface, cutting forces and wear of the cutting tool has been established. The purpose of this work is to study the effect of machining modes on delamination and roughness of fiberglass composites during end milling, as well as testing the hypothesis about the effect of torque on the delamination. The relevance of the study is due to the fact that delamination, along with roughness, has a significant impact on the quality of processing and subsequent assembly of the finished product. A criterion is proposed for assessing the magnitude of the delamination of composite materials during its machining. The results of experimental studies of the torque on the cutter, the relative coefficient of delamination and surface roughness from cutting conditions are presented. Methods: factorial experiment using an experimental assembly developed by the authors based on a piezoelectric torque sensor. The installation allows real-time recording of the change in torque during the milling process, depending on the modes of operation. Results and Discussion. A comparative analysis of the obtained dependences showed that the torque is directly related to delamination. To reduce the delamination, the depth of cut should be decreased, and in order to ensure the specified productivity, the feed and the rotational speed of the cutter should be increased. The presented results confirm the prospects of the developed approach aimed at machining new classes of composite materials.

Стилі APA, Harvard, Vancouver, ISO та ін.

Žarnovský, Jozef, Róbert Drlička, Juraj Ružbarský, and Ján Žitňanský. "Boroscopy Application in Assurance of Technological Equipment Operational Capability." Applied Mechanics and Materials 616 (August 2014): 69–76. http://dx.doi.org/10.4028/www.scientific.net/amm.616.69.

Повний текст джерела

Анотація:

This paper is focused on an emphasis of the preventive maintenance effect on reliable and safe operation of technological equipment, in view of technical diagnostics. Problems of the boroscopy as a diagnostics method providing fast information acquiring of inner parts of technological equipment turbomachinery RB211 DLE assembled in combined cycle gas turbine (CCGT) in selected company [. Observations were focused on high pressure axial compressor, being the main part of monitored technological system. From quality point of view the paper provides new perspective of internal inspection of technological equipment covering possible damages locating and qualifying of qualitative characteristics of equipment inner parts. The problems solved were based on particular practice demands and it reflects state-of-art in concerned scientific field [.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Technological quality assurance"

Анциферова, Олеся Олександрівна. "Технологічне забезпечення точності та якості поверхонь зубчастих коліс при удосконаленні методу зубошліфування". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38013.

Повний текст джерела

Анотація:

Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.02.08 – технологія машинобудування. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2018. Дисертацію присвячено вирішенню проблеми підвищення продуктивності процесу зубошліфування на основі досягнення високої необхідної точності і якості поверхневого шару з оцінкою комплексного впливу конструктивно-технологічних факторів на процес формування поверхневого шару зубів зубчастих коліс з метою підвищення їх зносостійкості, а також продуктивності технологічного процесу в оптимальних виробничих умовах. Отримала подальший розвиток теоретико-експериментальна залежність формоутворення якості поверхневого шару та способу переривчастого зубошліфування, яка відрізняється врахуванням геометричних параметрів переривчастого кругу, що дозволило прогнозувати експлуатаційні властивості зубчастих коліс. Удосконалені технологічні засоби стабілізації оптимальних режимів переривчастого зубошліфування, які дозволяють підвищити якість обробки зубчастих коліс. Встановлена закономірність зменшення засалювання переривчастого зубошліфувального кругу та температури у зоні контакту, яке впливає на забезпечення експлуатаційних властивостей поверхонь зубів.
Thesis for scientific degree of Candidate of Technical Sciences on speciality 05.02.08 − Manufacturing Engineering. − National Technical University "Kharkiv Polytechnic Institute", Kharkiv, 2018. The dissertation is devoted to solving the problem of increasing the productivity of the process of grinding on the basis of achieving the high required accuracy and quality of the surface layer with an assessment of the complex influence of structural and technological factors on the formation of the surface layer of teeth of gear wheels in order to increase their wear resistance, as well as the productivity of the technological process in optimal production conditions. The theoretical and experimental dependence of the formation of the quality of the surface layer and the method of intermittent gear grinding has been further developed, which differs from the geometric parameters of the discontinuous circle, which allowed predicting the operational properties of the gears. Improved technological means of stabilizing optimal modes of intermittent gear grinding, which allow to improve the quality of machining of gear wheels. The regularity of reduction of salting of intermittent gear grinding wheels and temperature in the contact zone is established, which affects the maintenance of the operational properties of tooth surfaces.

Стилі APA, Harvard, Vancouver, ISO та ін.

Повний текст джерела

Анотація:

Стилі APA, Harvard, Vancouver, ISO та ін.

Hung, Tsu-Han, and 洪子涵. "Examination of Education Quality Assurance System Cognition: Learning Effectiveness and Career Development for Technological College students of Hospitality." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/05904356494954282449.

Повний текст джерела

Анотація:

碩士
東海大學
餐旅管理學系
101
In the last decade, the number of the undergraduate hospitality, tourism and leisure programmes (HTLPs) have dramatically increased in Taiwan.The most important reason that student growing rapidly is about the development of hospitality. The gradual growth in the number of tourist has nearly ten million and many students focus on their job in the future that they can choose. Hence, most of colleges established department for training the talent.However, HTLPs has led to problems with quality control in education.For maintaining the quality of education, quality assurance system has gradually become the most powerful tool.The education quality assurance system focuses on the process of learning. From the industry’s prospective, employers also preferably the employee have the practical skills and knowledge.The aim of this research is to exam the education quality assurance system on the learning effectiveness and career development for technological college students of hospitality.The research adopts some models from three scholars to separate three levels that include eight dimensions: Administrative management, Strategic planning, Curriculum and instruction, Faculty, Educational Quality, Students’performance, Educational Resources & Student involvement.Adopting stratified random sampling to investigate the student in junior and senior of hospitality in technological college. The totals of 1050 questionnaires weresending to technological collegescatteraround Taiwan. The numbers of usable questionnaire was found to be 548 and achieved a response rate of 52.2%.The theoretical model is constructed with SEM and verified by AMOS 20 in which. The research model shows that School and Student Levels have positive direct effect on career development and also Student Levels through learning effectivenesshas direct effect on career development. Consequently, the education institution should develop the education quality assurance system to help student cultivate their skill and knowledge to get with industry. In the process, it’s reavel the teacher’s level has the problem. The teachers should to focus on the problem and make way to solve. That’s why the education quality assurance is so important to find the problem..

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Technological quality assurance"

Troy, Kathryn. Employee buy-in to total quality. New York, NY: Conference Board, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Troy, Kathryn. Employee buy-in to total quality: A corporate progress report. New York, NY: Conference Board, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Aviation safety: Efforts to implement flight operational quality assurance programs : report to Congressional requesters. Washington, D.C: The Office, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ontario. Premier's Council on Economic Renewal. Best practices assessment. Toronto, Ont: The Council, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ontario. Premier's Council on Economic Renewal. Adapting to new economic realities: A survey of Ontario business : a report. Toronto, Ont: Premier's Council on Economic Renewal, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Aviation safety: More research needed on the effects of air quality on airliner cabin occupants : report to the Ranking Democratic Member, Subcommittee on Aviation, Committee on Transportation and Infrastructure, House of Representatives. Washington, D.C. (P.O. Box 37050, Washington 20013): U.S. General Accounting Office, 2004.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Aviation safety: FAA needs to update the curriculum and certification requirements for aviation mechanics : report to the ranking Democratic member, Committee on Transportation and Infrastructure, House of Representatives. Washington, D.C: United States General Accounting Office, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Aviation safety: Advancements being pursued to improve airliner cabin occupant safety and health : report to the ranking democratic member, Committee on Transportation and Infrastructure, House of Representatives. Washington, D.C. (P.O. Box 37050 Washington 20013): U.S. General Accounting Office, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Aviation Safety: Undeclared air shipments of dangerous goods and DOT's enforcement approach : report to the Ranking Minority Member, Subcommittee on Aviation, Committee on Transportation and Infrastructure, House of Representatives. Washington, D.C. (P.O. Box 37050, Washington 20013): U.S. General Accounting Office, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Aviation safety: FAA oversight of repair stations needs improvement : report to congressional requesters. Washington, D.C: The Office, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Technological quality assurance"

Mitchell-Schuitevoerder, Rosemary. "Human and technological quality assurance." In A Project-Based Approach to Translation Technology, 92–112. London ; New York : Routledge, 2020. | Series: Translation practices explained: Routledge, 2020. http://dx.doi.org/10.4324/9780367138851-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Iwanczyk, D. "Quality Assurance Using Information Technological Interlinking of Subprocesses in Forming Technology." In Advanced Manufacturing Systems and Technology, 815–22. Vienna: Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-2678-3_99.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shvartsburg, L. E., E. V. Butrimova, and O. V. Yagolnitser. "Assurance of Quality Indices of Technological Processes of Form-Shaping During Preproduction Stage." In Proceedings of the 4th International Conference on Industrial Engineering, 1575–82. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95630-5_168.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Noeske, Michael, Welchy Leite Cavalcanti, Hauke Brüning, Bernd Mayer, Antonios Stamopoulos, Apostolos Chamos, Thomas Krousarlis, et al. "Introduction to Recent Advances in Quality Assessment for Adhesive Bonding Technology." In Adhesive Bonding of Aircraft Composite Structures, 1–50. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-92810-4_1.

Повний текст джерела

Анотація:

AbstractThe first chapter highlights the relevance of both adhesive bonding technology and in-process quality assessment for mastering twenty-first-century challenges in joining functional and lightweight materials like carbon fibre reinforced polymers. The ongoing developments of the relevant technological and regulatory procedures and frameworks are hereby outlined, following trends for data-driven innovation and standardisation. Advances from monitoring process variables towards the in-depth and objective Extended Non-destructive Testing (ENDT) of material-related features are presented, based on methodological and technological innovation and insights from recent European joint research projects like Horizon 2020s ComBoNDT—“Quality assurance concepts for adhesive bonding of aircraft composite structures by advanced NDT”. Introducing ten heuristic principles for quality assessment in bonding processes, a concept is demonstrated for establishing empirically consolidated sets of quantitative material and process-specific correlations between design-relevant joint features and quality data measured during the manufacture or repair of adhesive joints using ENDT. Each correlation is obtained by systematically introducing disturbances of relevant process features identified by experts and is levelled once by linking findings from standardised mechanical tests with ENDT results obtained for joints that have intentionally been manufactured or repaired in an off-specification way. Subsequent chapters will demonstrate the suitability of the broadly applicable process.

Стилі APA, Harvard, Vancouver, ISO та ін.

Atiku, Sulaiman Olusegun, and Richmond Anane-simon. "Leadership and Innovative Approaches in Higher Education." In Quality Management Principles and Policies in Higher Education, 83–100. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1017-9.ch005.

Повний текст джерела

Анотація:

The place of leadership support for technological innovation in advancing quality management in higher education cannot be underrated in the fourth industrial revolution. This chapter examines the role of leadership in higher education and innovative teaching and learning methods for quality assurance in higher education system. The literature review approach and author observation were adopted to cross-examine the influence of leadership on innovative teaching/learning methods and quality assurance in higher education. This chapter shows that leadership support for innovative teaching and learning methods is a benchmark for quality assurance in higher education in recent times. Therefore, no meaningful change will happen in any higher institution without a strong leadership support for innovation and quality management. Policymakers in higher education should create a climate that promotes creativity and innovation by ensuring that transformational leaders are at the helm of affairs for quality management.

Стилі APA, Harvard, Vancouver, ISO та ін.

Katehakis, Dimitrios G., George Pangalos, and Andriana Prentza. "Security Improvements for Safer Cross-Border E-Health Services in Europe." In Quality Assurance in the Era of Individualized Medicine, 257–81. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-2390-2.ch010.

Повний текст джерела

Анотація:

Preserving patient safety, patient rights, and safeguarding trust are crucial components for the provision of high-quality medical treatments across borders. This chapter focuses on required technological improvements to address quality challenges through the adoption of generic building blocks (BBs) towards enabling seamless care between European healthcare systems. The authors present important considerations that are relevant to incremental, cross-sectorial advancements for the enhancement of the technology used for the implementation of the directive on the application of patients' rights in cross-border healthcare. These include cross-domain technical BBs to support non-repudiation, capability lookup, dynamic service location, and electronic identification. The authors use cross-border electronic prescription and patient summary, as a case to discuss the use of related international interoperability standards, together with recommendations for future work relevant to the introduction of better quality, trustworthy, cross-border, electronic health services in Europe.

Стилі APA, Harvard, Vancouver, ISO та ін.

Smith, Alan D. "Digital Marketing and E-Tailing Technological Innovations." In Advances in Finance, Accounting, and Economics, 37–65. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1104-6.ch003.

Повний текст джерела

Анотація:

In an age of public mistrust of the most basic institutions, businesses are not exempted. Essentially all e-tailers want to deliver personalized and real-time communications to customers that are tailored to their interests and preferences, and are based on big data mining that customers will value over privacy concerns. This is an era in which e-commerce retailers continue to dominate the marketplace and it is integral that consumers are able to trust the manufacturers, retailers, and the service/product reviews that they read online. Such trust is particularly important if their ultimate purchase decision is a successful one. A survey of middle-level managers was analyzed to identity the basic elements: e-personalization, namely online purchasing behaviors, personalized communications, information-retrieval services, degree of personal web presence, quality assurance of customer service, and the promotion of customization services. These elements were found to be conceptually and statistically related to retailer benefits of increased buying and customer loyalty.

Стилі APA, Harvard, Vancouver, ISO та ін.

Sandhyaduhita, Puspa Indahati, Haya Rizqi Fajrina, Ave Adriana Pinem, Achmad Nizar Hidayanto, Putu Wuri Handayani, and Kasiyah M. Junus. "Hospital Service Quality from Patients Perspective." In Hospital Management and Emergency Medicine, 550–66. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-2451-0.ch027.

Повний текст джерела

Анотація:

This study aims to identify and analyse strategic service quality as perception-minus-expectation from patient perspective using SERVQUAL-based Handayani et al.'s framework. The result from 297 respondents shows that the criteria gaps are given as follows in descending order from the biggest gap: (1) responsiveness, (2) assurance, (3) professionalism, (4) reliability, (5) empathy and (6) tangible. Apparently, the gap for each criterion transpires to be significantly different which straightforwardly indicates the quality of the service delivered by hospitals for each criterion is still below respondents' expectations. Recommendation towards hospitals is proposed from technological point of view in forms of IT support in order to significantly improve the process as the dimension of the responsiveness criterion. Nonetheless, suggestion towards the Ministry of Health as the policy maker is also addressed that urges the establishment of policy and its implementation concerning IT support for accelerating hospitals automation.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kadda, Anastasia K. "The Social Role of Technology in Healthcare Quality Improvement." In Quality Assurance in Healthcare Service Delivery, Nursing and Personalized Medicine, 178–86. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-61350-120-7.ch009.

Повний текст джерела

Анотація:

The aim of this study is to describe the social role of technology in healthcare quality improvement. Methodologically, the study was based on a review of the relevant literature, Greek and foreign, as well as Internet sources related to the social role of technology in healthcare quality improvement. The main conclusions drawn were the following: a) The development of new technologies in the field of health and their involvement within the social context is today a fast accelerating process; b) The presentday expansion of health-oriented technology is of vital importance because of current trends in the field of healthcare and of the social evolution on healthcare services; c) Information technology is capable of profoundly contributing to the improvement of the quality of health, and thus to the wellbeing of the citizens in a society; d) By the use of health technology, more efficient and productive financial management is achieved with numerous benefits for the economy; e) Electronic health can improve the quality of healthcare thereby facilitating the work of health professionals; f) Greek society is being increasingly influenced by both international and domestic scientific and technological advances in health technology despite the existence of significant legal barriers; g) Current trends in the European Union as far as health technology is concerned are intimately connected with expanding citizen participation in the electronic revolution and their increasing access to the Information Society.

Стилі APA, Harvard, Vancouver, ISO та ін.

Smith, Alan D. "Beneficial E-Personalization and Related Technological Innovations Applied to E-Tailing." In Trends in E-Business, E-Services, and E-Commerce, 20–46. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-4510-3.ch002.

Повний текст джерела

Анотація:

The numerous advancements in electronic-personalization communication have generated both benefits and challenges as online retailers try to regain competitive advantages in the current global recession. A literature review of personalization strategies was used to generate a survey instrument to examine the important characteristics of such programs from business professionals. Through appropriate multivariate analyses and data-reduction techniques, the basic elements e-personalization, namely online purchasing behaviors, personalized communications, information retrieval services, degree of personal Web presence, quality assurance of customer service, and the promotion of customization services, were found to be conceptually and statistically related to retailer benefits of e-personalization (increased buying and creates customer loyalty) from the viewpoint of managers for a large goods and services chain store headquartered in Pittsburgh, Pennsylvania.

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Technological quality assurance"

Bortsova, E., and L. Lavrova. "Technological quality assurance of culinary products in low-temperature cooking conditions." In INTERNATIONAL CONFERENCE ON FOOD SCIENCE AND BIOTECHNOLOGY (FSAB 2021). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0069418.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Koromzay, T. "Quality Assurance in the Reconditioning of Gas Turbine and Compressor Blading Components." In ASME 1986 International Gas Turbine Conference and Exhibit. American Society of Mechanical Engineers, 1986. http://dx.doi.org/10.1115/86-gt-299.

Повний текст джерела

Анотація:

During the past several years, there has been a strong trend worldwide toward the extensive repair of used gas turbine blading components. The behavior of the marketplace, i.e., of customers, and that of insurance companies, presented manufacturers with two alternatives: 1. To allow the market to go its own way, thereby losing, in many cases, technological control over the blading components installed in their own turbines, or 2. To become active in the business of blade reconditioning. This paper deals with the second of these alternatives.

Стилі APA, Harvard, Vancouver, ISO та ін.

Maksarov, V. V., A. E. Efimov, and A. I. Keksin. "Technological Quality Assurance of Hydraulic Cylinder Stock Manufacturing Based on High-Energy Impact on Product Surface." In Proceedings of the International Symposium “Engineering and Earth Sciences: Applied and Fundamental Research” (ISEES 2018). Paris, France: Atlantis Press, 2018. http://dx.doi.org/10.2991/isees-18.2018.62.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Van Valkenburg, Taunia, Ernie F. Petru, Paula R. Diepolder, and Gary M. Sandquist. "Current Implementation of the Quality Assurance Program at the United States Los Alamos National Laboratory." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-31059.

Повний текст джерела

Анотація:

The Los Alamos National Laboratory (LANL) is a one of the largest and diverse science and technological institutions in the world. The size and sophistication of LANL’s facilities and workforce present a unique challenge to develop and implement a Quality Assurance (QA) program that meets LANL’s needs. LANL has updated its QA Program to a targeted, requirements-based approach, and broadened its Quality Assurance technical expertise into essential technical areas. The expanded areas of expertise include engineering, project management, nuclear facility operations, and weapons design and fabrication. This approach is achieving success as evidenced on an institutional level by LANL’s receipt of various national, international and local awards for its products and services. Success is also realized on the QA Program level with sufficient recognition of the importance of the QA Program by the LANL workforce. However, QA program challenges remain in areas of expanding the importance of QA; streamlining the grading process and ensuring the program is commensurate with risk and customer expectations; maintaining sufficient authority and freedom from line management for deployed QA personnel while continuing to increase the technical breadth of QA personnel. These are the focus areas to continuously improve the LANL QA Program.

Стилі APA, Harvard, Vancouver, ISO та ін.

Fedukov, Alexander, and Alexander Khandozhko. "Technological Quality Assurance of Assembling Machine Components Based on Modular Elements, Taking into Account the Contact Stiffness of the Joints." In Proceedings of the International Conference on Aviamechanical Engineering and Transport (AviaENT 2019). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/aviaent-19.2019.21.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Connoley, Kathy. "Integration for a New Generation - Technological Solutions for Linking Core Functions of Teaching and Learning." In InSITE 2006: Informing Science + IT Education Conference. Informing Science Institute, 2006. http://dx.doi.org/10.28945/3012.

Повний текст джерела

Анотація:

The Teaching and Learning Group, in the Faculty of Arts, Deakin University, Australia, has successfully implemented Stage One of a Teaching and Learning Database. The database is unique in Deakin, and aims to integrate the core functions of curriculum, unit chair and assessment panel maintenance, academic workloads and quality assurance reporting for the Faculty of Arts. Stage One developments have already replaced many hard-copy forms. The following paper describes the database project, how it was initiated in the Faculty, the options considered, and an illustration of its progress to date. It will also describe the future developments planned for this project during the next six months, developments that will add capabilities to manage academic workloads.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mauk, Michael G., Richard Y. Chiou, Shraman Kadapa, Yalcin Ertekin, and Tzu-Liang (Bill) Tseng. "Using Surface Characterization for Engineering Education Laboratories." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72264.

Повний текст джерела

Анотація:

A suite of surface measurement methods are described, assessed and compared for several types of materials of technological interest including silicon for solar cells, machined metal surfaces, and rapid prototyped (e.g., 3d-printed) plastic parts. We describe student laboratory projects for surface roughness characterization using different techniques including depth gauge, stylus profilometer, atomic force microscope (AFM), glossmeter, LED light scattering, laser light scattering, image processing, and wetting angle measurements. This provides instructive case studies for learning concepts of surface characterization and metrology, comparing information gained by different measurement techniques, gauge reproducibility and repeatability, optimizing post-processing in rapid prototyping, and issues for adapting measurements for automated and in-line quality assurance.

Стилі APA, Harvard, Vancouver, ISO та ін.

Weber, Lucas Eduardo, Mayana Chagas Carvalho, Veruschka Vieira Franca, and Débora de Gois Santos. "Proposição de modelo de maturidade para serviços de fiscalização de obras públicas." In XI SIMPÓSIO BRASILEIRO DE GESTÃO E ECONOMIA DA CONSTRUÇÃO. Antac, 2021. http://dx.doi.org/10.46421/sibragec.v11i00.5.

Повний текст джерела

Анотація:

Public enterprises play an important role in the social and economic development of society, but their constructions are often characterized by inefficiency in the use of public resources, constant delays in delivery and poor quality. In this context, the construction supervision phase has a great responsibility, as it is one of the phases that contributes to the quality assurance of the public enterprise. The aim of this paper is to propose a maturity model based on the best practices of public entities' inspection teams in order to verify the degree of maturity in relation to the practices established by the TCU. For the exemplification, the proposed model was applied in a public institution, whose key stage analyzed referred to the concreting service and its respective key recommendations. In general, it proved to be effective and easy to apply for the evaluation of maturity in the sector of public works inspections. As a result of the application of the model, it was verified that the institution studied is at the transition level for the mature, with a maturity level of 87%, and the institution places more emphasis on services subject to requests for corrections and technological control.

Стилі APA, Harvard, Vancouver, ISO та ін.

Bartonicek, Jaroslav, Lubomir Junek, Milan Vrana, and Stanislav Vejvoda. "Safety Approach and Ageing Management in Czech Rules and Standards." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77653.

Повний текст джерела

Анотація:

There are basic technical (protection) objectives determined for assurance of nuclear power plant safety and the following generally belong among them: - Reactor pressure vessel shut down, - Long term maintenance of sub-critical state, - Long term cooling, - Prevention of radioactivity leakage. To ensure these objectives multi-step concept of deep protection is used for the design of a nuclear power plant and it includes: - Prevention of failures during normal and abnormal operation, - Control of failures and their consequences, - Minimizing of risks during accidents. Failure of operating systems is conservatively postulated for determination of systems requirements using for failure ensure as piping breaks. Ensure of these postulated failures come under multilevel safety approach. Failure consequences should be mainly ensured by design measures as separation of high energy piping, whip piping restrains etc. Efficiency of design measures have to be demonstrated. This passive safety procedure during design of new NPP can be applied. Application of this passive procedure for operating NPP can lead to technical and economical problems. It can be done by non precise and non sufficient requirements, current standards and documents. Leak before break concept (LBB) is very often out due to break operation conditions for successful concept usage. Beak preclusion concept was defined in Germany thirty years ago. The concept is developed from this time. Required quality of SSC is basic of this concept. The quality has to be received during manufacturing and assembly of new components to system or the quality passport has to be documented for SSC in operation before enlistment to the concept. During next operation they are sufficient and redundant measures necessary to control and to manage ageing phenomena (conceptual, technological, and physical) for exclusion of premature ageing. This proactive approach is also basic of documents from the last year’s required ageing and lifetime management. In Czech NPPs postulated failures and their consequences in accord with producer knowledge state at that time were insured. Postulated failures and their consequences were insured partly design measures and partly design supposed quality too. It is very difficult to realize new requirements on needed design provision on NPP in operation. It is impracticable in any cases. Needed national law for approach application exists in Czech from 1997. Regulation on lifetime management and national nuclear standards with specific requirements exist in Czech too. There are backgrounds for application proactive approach as it is used in Germany NPPs. New safety approach was provided in Czech NPPs. SSC are separated into three groups on the base safety approach: - SSC must not fail (guarantee of quality), - SSC may fail in rare case (preventative maintenance), - SSC may fail (failure orientated maintenance). The contribution deals about new Czech safety concept aspects, boundary conditions, needed document and proactive measures.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!