Добірка наукової літератури з теми "Switching machines"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Switching machines".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Switching machines"
Zhang, Yongdeng, María Lara-Tejero, Jörg Bewersdorf, and Jorge E. Galán. "Visualization and characterization of individual type III protein secretion machines in live bacteria." Proceedings of the National Academy of Sciences 114, no. 23 (May 22, 2017): 6098–103. http://dx.doi.org/10.1073/pnas.1705823114.
Повний текст джерелаIlhan, E., T. E. Motoasca, J. J. H. Paulides, and E. A. Lomonova. "Energy Conversion Loops for Flux-Switching PM Machine Analysis." Engineering, Technology & Applied Science Research 2, no. 5 (October 6, 2012): 285–90. http://dx.doi.org/10.48084/etasr.209.
Повний текст джерелаKim, Jang, Chung, and Hwang. "A New Outer-Rotor Hybrid-Excited Flux-Switching Machine Employing the HTS Homopolar Topology." Energies 12, no. 14 (July 10, 2019): 2654. http://dx.doi.org/10.3390/en12142654.
Повний текст джерелаMasoud, M. I., and A. S. Abdelkhalik. "Performance Evaluation of Eleven-Phase Induction Machine with Different PWM Techniques." Journal of Engineering Research [TJER] 12, no. 1 (June 1, 2015): 1. http://dx.doi.org/10.24200/tjer.vol12iss1pp1-14.
Повний текст джерелаShuraiji, Ahlam Luaibi, and M. M. J. Al-ani. "Design and optimization of HTS flux-switching permanent magnet machine." International Journal of Power Electronics and Drive Systems (IJPEDS) 10, no. 4 (December 1, 2019): 1751. http://dx.doi.org/10.11591/ijpeds.v10.i4.pp1751-1757.
Повний текст джерелаBunker, Bruce C., Dale L. Huber, James G. Kushmerick, Timothy Dunbar, Michael Kelly, Carolyn Matzke, Jianguo Cao, et al. "Switching Surface Chemistry with Supramolecular Machines†." Langmuir 23, no. 1 (January 2007): 31–34. http://dx.doi.org/10.1021/la0615793.
Повний текст джерелаHwang, Young Jin, Jae Young Jang, and SangGap Lee. "A Flux-Controllable NI HTS Flux-Switching Machine for Electric Vehicle Applications." Applied Sciences 10, no. 5 (February 25, 2020): 1564. http://dx.doi.org/10.3390/app10051564.
Повний текст джерелаShaitor, Nikolay, Michal Kelemen, and Boris Yakimovich. "Analysis and Synthesis in the Design of Magnetic Switching Electric Machines." Actuators 10, no. 7 (July 16, 2021): 164. http://dx.doi.org/10.3390/act10070164.
Повний текст джерелаCao, Junshuai, Xinhua Guo, Weinong Fu, Rongkun Wang, Yulong Liu, and Liaoyuan Lin. "A Method to Improve Torque Density in a Flux-Switching Permanent Magnet Machine." Energies 13, no. 20 (October 13, 2020): 5308. http://dx.doi.org/10.3390/en13205308.
Повний текст джерелаPillai, S., and M. F. Jacome. "Predicated switching - optimizing speculation on EPIC machines." IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 24, no. 3 (March 2005): 318–35. http://dx.doi.org/10.1109/tcad.2004.842804.
Повний текст джерелаДисертації з теми "Switching machines"
Zulu, Ackim. "Flux switching machines using segmental rotors." Thesis, University of Newcastle Upon Tyne, 2010. http://hdl.handle.net/10443/1070.
Повний текст джерелаGuardado, J. L. "Computer models for representing electrical machines during switching transients." Thesis, University of Manchester, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.521481.
Повний текст джерелаIcli, Burcak. "Towards Autonomous Molecular Machines: Switching Coupled To An Oscillating Reaction." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/2/12608749/index.pdf.
Повний текст джерелаChen, Anyuan. "Investigation of Permanent Magnet Machines for Downhole Applications : _ Design, Prototype and Testing of a Flux-Switching Permanent Magnet Machine." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-11829.
Повний текст джерелаForster, Andrew E. "Energy Harvesting From Exercise Machines: Buck-Boost Converter Design." DigitalCommons@CalPoly, 2017. https://digitalcommons.calpoly.edu/theses/1702.
Повний текст джерелаNasr, Andre. "Nouvelles structures de machines électriques pour la génération embarquée avionique." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLN065.
Повний текст джерелаThis work addresses the subject of the embedded electric generation in future aircraft. The main objective is to find a new electrical machine structures that can meet the new avionic requirements. We have been particularly interested in a Hybrid Excited Flux Switching machine with a Magnetic Bridge (HEFSMMB). The structure of this machine has several advantages such as static excitation sources, a passive rotor and a unique stator structure which makes it possible to have a low residual voltage, thus respecting the safety constraints. We have presented in the first chapter a state of the art on singly and doubly excited flux switching machines. We have also given the rules which define the choice of the number of stator and rotor poles. Chapter 2 was devoted to study the electromagnetic performances of the HEFSMMB using a finite element model. This model has been validated by experimental measurements carried out on a 3 kW prototype. In the final chapter, we have put in place an optimization methodology in order to improve the overall performances of the HEFSMMB and to limit its residual voltage. The optimization results showed much improved performances. It can be concluded that the MCFDEPM is a good candidate to replace the three-stage machine in future aircraft
Felicetti, Roberto. "Voltage Transients in the Field Winding of Salient Pole Wound Synchronous Machines : Implications from fast switching power electronics." Licentiate thesis, Uppsala universitet, Elektricitetslära, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-434652.
Повний текст джерелаCalmels, Dorothea [Verfasser], and Hans [Akademischer Betreuer] Ziegler. "Job Sequencing and Tool Switching Problems with a Generalisation to Non-Identical Parallel Machines / Dorothea Calmels ; Betreuer: Hans Ziegler." Passau : Universität Passau, 2020. http://d-nb.info/1218780703/34.
Повний текст джерелаLovgren, Nicholas Keith. "Energy Harvesting From Exercise Machines: Forward Converters with a Central Inverter." DigitalCommons@CalPoly, 2011. https://digitalcommons.calpoly.edu/theses/520.
Повний текст джерелаBen, Sedrine Emna. "Machines à commutation de flux à grand nombre de phases : modèles comportementaux en mode dégradé et élaboration d’une stratégie de commande en vue de l’amélioration de la tolérance aux pannes." Thesis, Cachan, Ecole normale supérieure, 2014. http://www.theses.fr/2014DENS0047/document.
Повний текст джерелаIn this thesis, we are interested in the study of a five-phase flux switching permanent magnet machine (five-phase FSPM machine) behavior in healthy and faulty mode. First, a comparison of electromagnetic performances between this machine and an equivalent three-phase machine is carried out. These performances are calculated by a Finite Element (FE 2D) model and validated by experiments. Results showed the five-phase machine contribution with a higher torque density, lower torque ripples, lower short-circuit current and ability to tolerate phases faults. The study of open-circuit tolerance is then developed for this five-phase FSPM. The behavior of the machine (the average torque, torque ripples, copper losses and the current in the neutral) in the case of open-circuit on a single and two adjacent and non-adjacent phases is presented. Then reconfiguration methods to improve the operation are proposed including a minimum reconfiguration allowing to end up with a feeding equivalent to that of a three-phase or a four-phase machine, an analytical calculation of optimal currents to cancel both the neutral current and torque ripples while ensuring the average torque, and finally a reconfiguration performed by a genetic optimization algorithm which is a non-deterministic algorithm multi-objective functions and multi-constraints. In this context, various combinations of different objectives and constraints are proposed and optimal currents are injected into the 2D FE model of the machine to see if performances have been improved. The analytical model of the torque used in the optimization algorithm is then revised to take into account the influence of the degraded mode. Different solutions of Pareto front are analyzed and electromagnetic performances are improved. This is verified by FE 2D calculations and followed by experimental validation. Faults impact on the radial magnetic forces is also analyzed. In the second part of this work, the study of the five-phase FSPM machine tolerance to short-circuit faults is performed. First steps of the faults isolation are proposed. Thereafter, short-circuit currents, taking into account the reluctance machine impact, are calculated analytically and their effects on machine performances are analyzed. Reconfigurations are also calculated by the genetic algorithm optimization and new references currents improved the degraded mode operation. All results are validated by the FE 2D calculation and experimentally. In conclusion, comparisons between fault-tolerance to phases openings and short-circuits of the five-phase FSPM machine are performed. Results led to conclude regarding the operation of this machine in healthy and degraded modes with and without correction. Analytical, numerical and experimental results showed good efficiency of the proposed control to improve fault-tolerance to phases openings and short-circuits
Книги з теми "Switching machines"
Benzaouia, Abdellah. Saturated Switching Systems. London: Springer London, 2012.
Знайти повний текст джерелаK, Jha Niraj, ed. Switching and finite automata theory. 3rd ed. Cambridge, UK: Cambridge University Press, 2010.
Знайти повний текст джерелаKohavi, Zvi. Switching and finite automata theory. 3rd ed. New York: Cambridge University Press, 2009.
Знайти повний текст джерелаSasao, Tsutomu. Switching theory for logic synthesis. Boston, Mass: Kluwer Academic Publishers, 1999.
Знайти повний текст джерелаSasao, Tsutomu. Switching theory for logic synthesis. Boston, Mass: Kluwer Academic Publishers, 1999.
Знайти повний текст джерелаDigital logic and state machine design. 3rd ed. Ft. Worth: Saunders College Pub., 1995.
Знайти повний текст джерелаDigital logic and state machine design. 2nd ed. Philadelphia: Saunders College Pub., 1990.
Знайти повний текст джерелаComer, David J. Digital logic and state machine design. 3rd ed. New York: Oxford University Press, 1995.
Знайти повний текст джерелаComer, David J. Digital logic and state machine design. 2nd ed. Philadelphia, Pa: Saunders College Pub, 1990.
Знайти повний текст джерелаSavage, John E. The complexity of computing. Malabar, Fla: R.E. Krieger Pub. Co., 1987.
Знайти повний текст джерелаЧастини книг з теми "Switching machines"
Sofianos, Nikolaos A., and Yiannis S. Boutalis. "Advances in Multiple Models Based Adaptive Switching Control: From Conventional to Intelligent Approaches." In Innovations in Intelligent Machines-5, 73–108. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43370-6_3.
Повний текст джерелаWeisheit, Toni, and Robert Hoyer. "Prediction of Switching Times of Traffic Actuated Signal Controls Using Support Vector Machines." In Advanced Microsystems for Automotive Applications 2014, 121–29. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08087-1_12.
Повний текст джерелаRavi, Arpitha, Florian Kordon, and Andreas Maier. "Automatic Switching of Organ Programs in Interventional X-ray Machines Using Deep Learning." In Informatik aktuell, 95–100. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-36932-3_20.
Повний текст джерелаCalmels, Dorothea, Chandrasekharan Rajendran, and Hans Ziegler. "Heuristics for Solving the Job Sequencing and Tool Switching Problem with Non-identical Parallel Machines." In Operations Research Proceedings, 459–65. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-18500-8_57.
Повний текст джерелаAlbers, Susanne, and Jens Quedenfeld. "Algorithms for Energy Conservation in Heterogeneous Data Centers." In Lecture Notes in Computer Science, 75–89. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75242-2_5.
Повний текст джерелаGeurts, Pierre, and Louis Wehenkel. "Temporal Machine Learning for Switching Control." In Principles of Data Mining and Knowledge Discovery, 401–8. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-45372-5_43.
Повний текст джерелаPedretti, Giacomo, and Daniele Ielmini. "Analogue In-Memory Computing with Resistive Switching Memories." In Machine Learning and Non-volatile Memories, 61–86. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-03841-9_4.
Повний текст джерелаChen, Kean, Danpu Liu, and Xingwen He. "Fast Beam Switching Based on Machine Learning for MmWave Massive MIMO Systems." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 19–29. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-90196-7_2.
Повний текст джерелаLi, Yinan, and Fang Liu. "Continuous-Time Markov-Switching GARCH Process with Robust State Path Identification and Volatility Estimation." In Machine Learning and Knowledge Discovery in Databases. Research Track, 370–87. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-86486-6_23.
Повний текст джерелаCong, Wei, Feng Zhao, Yongxing Wang, and Xuhui Wen. "Detailed Optimization for Different Switching Angle Curves of SHEPWM Adopted by Induction Machine Control System." In Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation, 647–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49367-0_63.
Повний текст джерелаТези доповідей конференцій з теми "Switching machines"
"Flux-switching machines and drives." In 2016 XXII International Conference on Electrical Machines (ICEM). IEEE, 2016. http://dx.doi.org/10.1109/icelmach.2016.7732855.
Повний текст джерелаIlhan, E., T. L. Balyovski, J. J. H. Paulides, and E. A. Lomonova. "Servo flux switching PM machines." In 2014 XXI International Conference on Electrical Machines (ICEM). IEEE, 2014. http://dx.doi.org/10.1109/icelmach.2014.6960247.
Повний текст джерелаRoemer, Daniel B., Per Johansen, Henrik C. Pedersen, and Torben O. Andersen. "Design Method for Fast Switching Seat Valves for Digital Displacement® Machines." In 8th FPNI Ph.D Symposium on Fluid Power. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/fpni2014-7852.
Повний текст джерелаLee, Il-Ho, Jun-Gu Kim, Jae-Hyung Kim, Chung-Yuen Won, and Yong-Chae Jung. "Soft switching bidirectional DC-DC converter to reduce switching losses." In 2011 International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2011. http://dx.doi.org/10.1109/icems.2011.6073568.
Повний текст джерелаChen, J. T., Z. Q. Zhu, S. Iwasaki, and R. Deodhar. "Low cost flux-switching brushless AC machines." In 2010 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE, 2010. http://dx.doi.org/10.1109/vppc.2010.5728984.
Повний текст джерелаZhao, Guishu, Wei Hua, and Ji Qi. "Comparative study of wound-field flux-switching machines and switched reluctance machines." In 2017 20th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2017. http://dx.doi.org/10.1109/icems.2017.8056182.
Повний текст джерелаWong, W. S. H. "Constant inverter switching frequency direct torque control." In International Conference on Power Electronics Machines and Drives. IEE, 2002. http://dx.doi.org/10.1049/cp:20020097.
Повний текст джерелаLiu, Xiao, Aaron M. Cramer, Vandana Rallabandi, and Dan M. Ionel. "Switching frequency selection for ultra-low-inductance machines." In 2017 IEEE International Electric Machines and Drives Conference (IEMDC). IEEE, 2017. http://dx.doi.org/10.1109/iemdc.2017.8002403.
Повний текст джерелаIlhan, E., M. F. J. Kremers, T. E. Motoasca, J. J. H. Paulides, and E. Lomonova. "Transient thermal analysis of flux switching PM machines." In 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER 2013). IEEE, 2013. http://dx.doi.org/10.1109/ever.2013.6521588.
Повний текст джерелаKhan, Faisal, Erwan Sulaiman, Mohd Fairoz Omar, and Mahyuzie Jenal. "Performance comparison of wound field flux switching machines." In 2015 IEEE Conference on Energy Conversion (CENCON). IEEE, 2015. http://dx.doi.org/10.1109/cencon.2015.7409560.
Повний текст джерела