Добірка наукової літератури з теми "Strength of the cutting"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Strength of the cutting".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Strength of the cutting"
Olena, Soroka, Rodichev Iuriy, Vorontsov Borys, and Protasov Roman. "Structural Strength of Cemented Carbides." Strojnícky časopis - Journal of Mechanical Engineering 71, no. 2 (November 1, 2021): 291–98. http://dx.doi.org/10.2478/scjme-2021-0035.
Повний текст джерелаMitin, E. V., and S. P. Sul’din. "Hob Strength in Gear Cutting." Russian Engineering Research 38, no. 8 (August 2018): 635–37. http://dx.doi.org/10.3103/s1068798x18080105.
Повний текст джерелаVichev, Stefan, Vanyo Kirov, and Dobril Hristov. "Strength calculation of cutting tools." International Journal of Machine Tools and Manufacture 34, no. 1 (January 1994): 13–18. http://dx.doi.org/10.1016/0890-6955(94)90036-1.
Повний текст джерелаWan, Song, and Jun Liu. "Commentary: Strength at the cutting edge." JTCVS Techniques 2 (June 2020): 58–59. http://dx.doi.org/10.1016/j.xjtc.2020.02.008.
Повний текст джерелаVereschaka, Anatoliy Stepanovich, Sergey N. Grigoriev, Valery P. Tabakov, Ekaterina S. Sotova, Alexey Anatolevich Vereschaka, and Mikhail Yu Kulikov. "Improving the Efficiency of the Cutting Tool Made of Ceramic when Machining Hardened Steel by Applying Nano-Dispersed Multi-Layered Coatings ." Key Engineering Materials 581 (October 2013): 68–73. http://dx.doi.org/10.4028/www.scientific.net/kem.581.68.
Повний текст джерелаKozlov, Victor, and Jia Yu Zhang. "Strength of Cutting Tool in Titanium Alloy Machining." Key Engineering Materials 685 (February 2016): 427–31. http://dx.doi.org/10.4028/www.scientific.net/kem.685.427.
Повний текст джерелаÍrsel, G., and B. N. Güzey. "Comparison of laser beam, oxygen and plasma arc cutting methods in terms of their advantages and disadvantages in cutting structural steels." Journal of Physics: Conference Series 2130, no. 1 (December 1, 2021): 012022. http://dx.doi.org/10.1088/1742-6596/2130/1/012022.
Повний текст джерелаLi, Shu Juan, Yong Ke Hu, Xue Jiang, and Juan Du. "Experimental Study on Cryogenic Cutting of High-Strength Steel with Liquid Nitrogen Cooling." Advanced Materials Research 328-330 (September 2011): 470–73. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.470.
Повний текст джерелаHuang, Wei Lei, and Gui Cheng Wang. "Strength of Screw Thread in Vibration Tapping." Advanced Materials Research 443-444 (January 2012): 678–83. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.678.
Повний текст джерелаSaito, Fuminori, Itsuo Nishiyama, and Toshio Hyodo. "Cutting strength — A new indicator for the mechanical strength of materials." Materials Letters 66, no. 1 (January 2012): 144–46. http://dx.doi.org/10.1016/j.matlet.2011.02.027.
Повний текст джерелаДисертації з теми "Strength of the cutting"
Molinaro, Marco. "Understanding the Strength of General-Purpose Cutting Planes." Research Showcase @ CMU, 2013. http://repository.cmu.edu/dissertations/257.
Повний текст джерелаÖhman, Felix. "Comparing the Effectiveness of Punching to Laser Cutting in UltraHigh Strength Steel." Thesis, KTH, Materialvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-298429.
Повний текст джерелаDenna studie undersöker effektiviteten av stansning jämfört med laserskärning i plåt av Ultra High Strength Steel (UHSS). Studien genomfördes för att bestämma vilken process som är effektivare med avseende på plåttjocklek, där kvaliteten på den skurna kanten också tas i beaktning vare sig stansning rekommenderas över laserskärning. Behovet av information kring stansning i UHSS kommer att öka i och med att UHSS blir vanligare. En enkel sikt, med måtten 1x1 m, med 169 hål, Ø = 15 mm, var utformningen av plåten som användes för att testa och jämföra stansning med laserskärning. Simuleringar av att stansa två plåtar av Hardox® 500 Tuf gjordes, med en tjocklek av 4 mm respektive 5 mm. Laserskärningen simulerades också, där en plåttjocklek på 4,5,6 och 8 mm testades, där både en 6 kW laser och en 10 kW laser simulerades. Lasrarna använder O2 som högtrycksgas. Stanstiden beräknades med hjälp av parametrar som används för material med materialegenskaper mellan S355 och rostfritt stål, eftersom man ansåg att stansningshastigheten mer eller mindre förblir densamma för olika material. Skärtiden för laser påverkas knappt av legeringsämnen och därför beräknas skärtiden för Hardox® 500 Tuf vara samma som skärtiden för S355. Simuleringarna av stansning och laserskärning samt ritningen för provets utformning, gjordes av företaget Weland AB. Ingen fysisk stansning gjordes på grund av brist på rätt verktyg. Simuleringarna av både stansning och laserskärning resulterade i att stansning var sju till åtta gånger snabbare än laserskärning. Men på grund av de extrema egenskaperna hos Hardox® 500 Tuf, spekuleras det att kvaliteten på den skurna kanten hos de stansade plåtarna vara undermålig, och lämpar sig då ej för typiska slitplåtstillämpningar. Det rekommenderas därför att laserskära Hardox 500® Tuf tills ytterligare forskning har utförts.
Medvedeva, Anna. "Performance of advanced tool steels for cutting tool bodies." Doctoral thesis, Karlstads universitet, Avdelningen för maskin- och materialteknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-5630.
Повний текст джерелаRay, Nathan. "Correlation between machining monitoring signals, cutting tool wear and surface integrity on high strength titanium alloys." Thesis, University of Sheffield, 2018. http://etheses.whiterose.ac.uk/20660/.
Повний текст джерелаFarrapo, Samily de Paulo. "Glycerines gross and semipurified on cutting power quails." Universidade Federal do CearÃ, 2015. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=15952.
Повний текст джерелаObjetivou-se avaliar o uso das glicerinas mista e bruta na alimentaÃÃo de codornas de corte. Foram executados dois experimentos, sendo um de digestibilidade para determinar os valores energÃticos da glicerina vegetal bruta e da mista semipurificada. No segundo experimento avaliou-se o desempenho, caracterÃsticas da carcaÃa e da carne de codornas de corte recebendo diferentes nÃveis de inclusÃo dessas glicerinas nas dietas. No ensaio de digestibilidade utilizou-se 180 codornas de corte, dos 14 aos 21 de idade, alojadas em gaiolas para estudos metabÃlicos, distribuÃdas em delineamento inteiramente casualizado em esquema fatorial 2x2+1, sendo 2 nÃveis de substituiÃÃo da raÃÃo referÃncia pela glicerina (10 e 20%), dois tipos de glicerinas (vegetal e mista), mais a raÃÃo referÃncia, totalizando 5 tratamentos com 6 repetiÃÃes de 6 aves. O perÃodo experimental foi de oito dias, sendo quatro para a adaptaÃÃo e quatro para coleta total de excretas. A glicerina vegetal bruta apresentou maior energia metabolizÃvel aparente corrigida pelo balanÃo do nitrogÃnio com base na MS (EMAn kcal/kgMS), como na MN (EMAn kcal/kgMN), 5.195 e 4.759, contra 3.884 e 3.472 para a glicerina mista semipurificada, para os valores energÃticos, respectivamente. No segundo experimento utilizou-se 432 codornas de corte de 1 a 42 dias de idade, distribuÃdas em delineamento inteiramente casualizado em esquema fatorial 2x4+1, sendo 2 tipos de glicerinas (vegetal e mista), 4 nÃveis de inclusÃo de glicerinas nas dietas (5, 10, 15 e 20%), mais a raÃÃo controle, sem inclusÃo de glicerina, totalizando 9 tratamentos com 4 repetiÃÃes de 12 aves. Aos 42 dias as aves passaram por jejum sÃlido de oito horas, para o abate, sendo duas aves de cada repetiÃÃo separadas dentro do peso mÃdio, para posteriores anÃlises. Avaliou- se o consumo de raÃÃo, ganho de peso, conversÃo alimentar, rendimento de carcaÃa, de cortes (peito e coxa+sobrecoxa), teor de gordura abdominal, biometria dos ÃrgÃos (fÃgado, coraÃÃo e moela), amÃnia volÃtil, umidade e PH da cama, bem como as caracterÃsticas fÃsicas e sensoriais da carne. Os dados foram submetidos à anÃlise de variÃncia e os nÃveis de inclusÃo das glicerinas, foram desdobrados em polinÃmios. Para comparaÃÃo em relaÃÃo ao tratamento controle, foi utilizado o teste de Dunnett (5%). Observou-se diferenÃa para o desempenho, onde a glicerina mista proporcionou maiores resultados para consumo de raÃÃo em todos os perÃodos analisados, bem como na conversÃo alimentar de 1 a 21 dias e de 1 a 42 dias de idade das codornas. NÃo foi observada diferenÃa entre as glicerinas utilizadas para a amÃnia volÃtil, enquanto entre os nÃveis de inclusÃo das glicerinas houve efeito linear crescente para essa variÃvel à medida que se adicionou qualquer das glicerinas nas raÃÃes. O pH da cama foi superior ao se utilizar qualquer nÃvel de inclusÃo da glicerina vegetal quando comparado ao tratamento controle, bem como a partir de 10% de inclusÃo os valores de pH sÃo maiores ao se utilizar a glicerina vegetal e nÃo a mista. Nenhum dos fatores analisados interferiu no teor de umidade da cama. NÃo foram observadas diferenÃas para o rendimento, jà a gordura abdominal mostrou-se maior nas aves que consumiram raÃÃo contendo glicerina vegetal. Para as caracterÃsticas fÃsicas da carne considerou-se a perda de peso por cocÃÃo, forÃa de cisalhamento e capacidade de retenÃÃo de Ãgua, onde os dados para os nÃveis de inclusÃo das glicerinas foram desdobrados em polinÃmios, enquanto que para as glicerinas usado o Teste F. Jà para as caracterÃsticas sensoriais, aroma, cor, sabor e avaliaÃÃo global, as mÃdias foram comparadas pelo teste de Ducan a 5%. O uso de glicerina vegetal ou mista nÃo interferiu nas caracterÃsticas sensoriais da carne de codorna (P>0,05), podendo ser usada em atà 20% de inclusÃo nas raÃÃes. Para as caracterÃsticas fÃsicas houve diferenÃa (P<0,05) para forÃa e cisalhamento sendo os nÃveis 12,5% da GMS e 12,78% da GVB os que apesentaram melhores resultados. Para PPC e CRA nÃo houve diferenÃa (P> 0,05) entre os tratamentos analisados. Conclui-se que as duas glicerinas possuem potencial para serem utilizadas atà 20% na alimentaÃÃo de codornas, sem prejudicar o ganho de peso, o rendimento e a qualidade da cama, sendo a glicerina bruta a que apresenta maior quantidade de energia. No entanto, 13% de inclusÃo de glicerina nas raÃÃes de codorna proporciona uma carne mais suculenta.
The objective was to evaluate the use of mixed and gross glycerines on slaughter quail. Two experiments were performed, one of digestibility to determine the energy values of crude vegetable glycerin and semipurified mixed. The second experiment evaluated the performance, carcass characteristics and meat quail meat receiving different levels of inclusion in the diets of these glycerides. In the digestibility assay was used 180 quails, from 14 to 21 of age, housed in cages for metabolic studies, distributed in a completely randomized design in a factorial 2x2 + 1, 2 ration of replacement reference levels for glycerin (10 and 20%), two types of glycerides (crop and mixed), the more the reference diet, totaling five treatments with 6 replications of 6 birds. The experiment lasted eight days, four for adaptation and four for excreta collection. Gross vegetable glycerin had a higher apparent metabolizable energy corrected by nitrogen balance based on MS (AMEn kcal / kgMS) as the MN (AMEn kcal / kgMN), 5,195 and 4,759, against 3,884 and 3,472 for the semipurified mixed glycerin to the energy values, respectively. In the second experiment we used 432 quails 1- 42 days old, distributed in a completely randomized design in a factorial 2x4 + 1, 2 types of glycerides (vegetable and mixed), 4 glycerines inclusion levels in diets (5, 10, 15 and 20%) over control diet without the addition of glycerin, a total of 9 treatment with 4 replications of 12 birds. At 42 days the birds have undergone solid fasting for eight hours for slaughter, two birds of each separate repetition within the medium weight, for further analysis. It were evaluate the feed intake, weight gain, feed conversion, carcass yield, cuts (breast and thigh + drumstick), abdominal fat, biometry of the organs (liver, heart and gizzard), volatile ammonia, moisture and PH of the bed, as well as physical and sensory characteristics of meat. Data were subjected to analysis of variance and levels of inclusion of glycerides, they were deployed in polynomials. For comparison compared to the control treatment was performed using the Dunnett's test (5%). Difference was observed for performance, where the mixed glycerol provided greater results for feed intake in all periods analyzed, as well as feed conversion 1-21 days and 1-42 days of age of quail. No difference was observed between the glycerides used for volatile ammonia, while between the levels of inclusion of glycerines there was increasing linear effect for this variable as they added either glycerines in feed. The pH was superior to the bed using any inclusion level of vegetable glycerin compared to the control treatment and from 10% to include the pH values are higher when using the vegetable glycerine and not mixed. None of the analyzed factors interfered with the moisture content of the bed. There were no difference for yield, since abdominal fat was higher in birds fed diet containing vegetable glycerin. For the physical characteristics of the meat considered the weight loss for cooking, shear strength and water holding capacity, where data for inclusion levels of glycerides were deployed in polynomials, while for the glycerides used Test F . As for the sensory characteristics, aroma, color, flavor and overall evaluation, the means were compared by 5% Duncan test. The use of vegetable glycerin mixed or no effect on the sensory characteristics of quail meat (P>0.05), can be used in up to 20% inclusion in diets. For the physical difference (P <0.05) for strength and shear levels being 12.5% of GMS and 12.78% of GVB apesentaram that the best results. CRA for PPC and there was no difference (P> 0.05) between treatments analyzed. It follows that the two glycerides have potential to be used up to 20% in the feed quail, without harming the weight gain, the yield and quality of the bed, and the crude glycerin presents the highest amount of energy. However, 13% inclusion of glycerin in quail rations provides a more succulent meat.
Stenberg, Thomas. "Fatigue properties of cut and welded high strength steels : Quality aspects in design and production." Doctoral thesis, KTH, Lättkonstruktioner, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188225.
Повний текст джерелаQC 20160613
WIQ
LIGHTSTRUCT
ONWELD
Gram, Michael D. "Fineblanking of High Strength Steels: Control of Materials Properties for Tool Life." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1280869210.
Повний текст джерелаBi, Wu. "Racking Strength of Paperboard Based Sheathing Materials." Miami University / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=miami1091059928.
Повний текст джерелаStater, Lydia M. "Female Friendship: Strength Found Through Support." Kent State University Honors College / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ksuhonors1525691709141172.
Повний текст джерелаБуковський, Олег Миколайович. "Підвищення ефективності обробки отворів малих розмірів в умовах автоматизованого виробництва". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/25648.
Повний текст джерелаMaster's attestation work on the topic: "Improving the efficiency of processing apertures of small sizes in the conditions of automated production" consists of 109 sheets. It includes 18 pictures, 30 tables, 3 attachments. 52 bibliographic titles were used in the work. The task of this work is to develop a system for improving the processing efficiency of small-sized apertures in the conditions of automated production. The existing methods of increasing the efficiency of processing small-sized apertures in the conditions of automated production are analyzed, the methods of their forming are considered, the theoretical study of the features of the cutting process during drilling of apertures has been carried out, the influence of cutting speed, properties of the treated material, the diameter of the drill, the filing and the temperature of cutting on the efficiency of processing the apertures of small sizes. As a result of the research, it was decided to develop an automated system for improving the efficiency of small-sized aperture processing, which is based on measuring the cutting forces and torque of the drilling process. For its realization a mathematical model, a basic scheme of work was created, an algorithm of its work was created and the necessary software was created. The research of increase of efficiency of processing of apertures of small sizes with the help of a full factor experiment has been carried out. The results of this work can be used by state-owned enterprises to improve the efficiency of processing small-sized apertures in the conditions of automated production by controlling the cutting process.
Книги з теми "Strength of the cutting"
Geier, J. E. Water-jet-assisted drag bit cutting in medium-strength rock. Pgh. [i.e. Pittsburgh] Pa: U.S. Dept. of Interior, Bureau of Mines, 1987.
Знайти повний текст джерелаAli, M. El Sayed. Effect of cutting on fracture strength of yttria partially stabilized zirconia. Roskilde: Riso National Laboratory, 1988.
Знайти повний текст джерелаFisher, G. T. Effects of composition and processing variables on transverse rupture strength and hardness of nickel-alloy-bonded titanium carbide. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1987.
Знайти повний текст джерелаRandy, Witte, ed. Cutting. Colorado Springs, CO: Western Horseman, 1989.
Знайти повний текст джерелаShaw, Phil. Cutting. Edited by Irons Stuart, Tiley Sue, and SATRA Footwear Technology Centre. Kettering: SATRA, 2002.
Знайти повний текст джерелаHenderson, Sara. From strength to strength. Oxford: ISIS, 1995.
Знайти повний текст джерелаPappas, Nicholas J. Strength. New York: Algora Pub., 2012.
Знайти повний текст джерелаStrength. London: Raintree, 2013.
Знайти повний текст джерелаApplewhite, Ashton. Cutting Loose. New York: HarperCollins, 2007.
Знайти повний текст джерелаJ, DiIulio John, and Brookings Institution. Center for Public Management., eds. Cutting government. Washington, D.C: Center for Public Management, Brookings Institution, 1995.
Знайти повний текст джерелаЧастини книг з теми "Strength of the cutting"
Mahardika, Muslim, Zahari Taha, Djoko Suharto, Kimiyuki Mitsui, and Hideki Aoyama. "Sensor Fusion Strategy in the Monitoring of Cutting Tool Wear." In Fracture and Strength of Solids VI, 727–32. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-989-x.727.
Повний текст джерелаZHOU, Hong, and Jiangchao WANG. "Investigation on Thick-Plate Cutting of High-Strength Steel." In FE Computation on Accuracy Fabrication of Ship and Offshore Structure Based on Processing Mechanics, 37–48. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-4087-2_3.
Повний текст джерелаNeugebauer, Reimund, V. Kräusel, and H. Bräunlich. "Advanced Cutting Technology in Process Chains for High Strength Steels." In Sheet Metal 2005, 817–24. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-972-5.817.
Повний текст джерелаJezernik, Niko, Srečko Glodež, Tomaz Vuherer, Bojan Špes, and J. Kramberger. "The Influence of Plasma Cutting Process on the Fatigue Strength of High Strength Steel S960Q." In Advances in Fracture and Damage Mechanics VI, 669–72. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-448-0.669.
Повний текст джерелаGuo, Ying, and Wei Shan. "The Effect of Freeze–Thaw and Moisture on Soil Strength Index of Cutting Slope." In Environmental Science and Engineering, 373–80. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29107-4_20.
Повний текст джерелаNikitina, L. G., and A. V. Volchenkov. "Study of Influence of Magnetic-Pulse Hardening on Cutting Tools Strength and Wear Resistance." In Lecture Notes in Mechanical Engineering, 59–65. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54817-9_7.
Повний текст джерелаEman, J., and K. G. Sundin. "Fracture Strains at Holes in High-Strength Steel, a Comparison of Techniques for Hole-Cutting." In Experimental Analysis of Nano and Engineering Materials and Structures, 195–96. Dordrecht: Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-6239-1_96.
Повний текст джерелаFriesen, D., R. Krimm, S. Fries, K. Brunotte, and B. A. Behrens. "Investigation on Noise Reduction During Cutting of High-Strength Materials Based on Machine Acoustic Simulation." In Lecture Notes in Production Engineering, 45–55. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-62138-7_5.
Повний текст джерелаMüller, Daniel, Jens Stahl, Isabella Pätzold, Roland Golle, Thomas Tobie, Wolfram Volk, and Karsten Stahl. "Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears." In Forming the Future, 2331–44. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_195.
Повний текст джерелаOvcharenko, Vladimir E., Konstantin V. Ivanov, and Bao Hai Yu. "Formation of a Nanostructured Hardened Surface Layer on the TiC-(Ni-Cr) Metal-Ceramic Alloy by Pulsed Electron-Beam Irradiation." In Springer Tracts in Mechanical Engineering, 421–59. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_18.
Повний текст джерелаТези доповідей конференцій з теми "Strength of the cutting"
Liu Zhibing and Wang Xibin. "Cutting performance and failure characteristic of new cutting tool in dry milling of high-strength steel." In International Technology and Innovation Conference 2009 (ITIC 2009). IET, 2009. http://dx.doi.org/10.1049/cp.2009.1423.
Повний текст джерелаKim, Junhee, Seungmin Woo, Daniel Dooyum Uyeh, Yeongsu Kim, Donghyuck Hong, and Yushin Ha. "Analyses of Garlic Stem Strength for Development of Cutting Machine." In 2019 Boston, Massachusetts July 7- July 10, 2019. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2019. http://dx.doi.org/10.13031/aim.201900955.
Повний текст джерелаPerrottet, Delphine, Roy Housh, Bernold Richerzhagen, and John Manley. "Heat damage-free laser-microjet cutting achieves highest die fracture strength." In Lasers and Applications in Science and Engineering, edited by Jim Fieret, Peter R. Herman, Tatsuo Okada, Craig B. Arnold, Friedrich G. Bachmann, Willem Hoving, Kunihiko Washio, et al. SPIE, 2005. http://dx.doi.org/10.1117/12.586710.
Повний текст джерелаvan Steveninck, Erik, and Jim Manson. "An Innovative High Strength Drill Pipe Mechanical Cutting Solution Using Coiled Tubing." In SPE/ICoTA Coiled Tubing Conference and Exhibition. Society of Petroleum Engineers, 2003. http://dx.doi.org/10.2118/81742-ms.
Повний текст джерелаLandgrebe, Dirk, Tom Barthel, and Frank Schieck. "Trimming of Flat and Tubular Components by High Speed Impact Cutting (HSIC)." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71362.
Повний текст джерелаStock, Johannes W., Michael F. Zaeh, and Justinian P. Spaeth. "Remote laser cutting of CFRP: influence of the edge quality on fatigue strength." In SPIE LASE, edited by Friedhelm Dorsch. SPIE, 2014. http://dx.doi.org/10.1117/12.2037793.
Повний текст джерелаXiaoping Zhang, Yaqin Zhang, and Gangjun Yang. "Analysis of factors influencing cutting quality and strength parameters of rolling cut shears." In Conceptual Design (CAID/CD). IEEE, 2008. http://dx.doi.org/10.1109/caidcd.2008.4730527.
Повний текст джерелаKobayashi, T., H. Ochiai, R. Fukagawa, S. Aoki, and K. Tamoi. "A Proposal for Estimating Strength Parameters of Lunar Surface from Soil Cutting Resistances." In 10th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments and Second NASA/ARO/ASCE Workshop on Granular Materials in Lunar and Martian Exploration. Reston, VA: American Society of Civil Engineers, 2006. http://dx.doi.org/10.1061/40830(188)63.
Повний текст джерелаIgathinathane Cannayen, Alvin R Womac, and Shahab Sokhansanj. "Effect of Angle of Cut on Corn Stalks Mechanical Cutting Strength and Energy." In 2010 Pittsburgh, Pennsylvania, June 20 - June 23, 2010. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2010. http://dx.doi.org/10.13031/2013.29678.
Повний текст джерелаWang, Z. Y., James Jacobs, and Pengtao Sun. "Atom Ionization in Metal Cutting." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65434.
Повний текст джерелаЗвіти організацій з теми "Strength of the cutting"
Cain, P., and L. S. O'Leary. Strength log of an open borehole from index testing of cuttings. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1985. http://dx.doi.org/10.4095/304842.
Повний текст джерелаBaral, Aniruddha, Jeffrey Roesler, M. Ley, Shinhyu Kang, Loren Emerson, Zane Lloyd, Braden Boyd, and Marllon Cook. High-volume Fly Ash Concrete for Pavements Findings: Volume 1. Illinois Center for Transportation, September 2021. http://dx.doi.org/10.36501/0197-9191/21-030.
Повний текст джерелаSubramaniam, Ramesh, Alfredo Perdiguero, Jason Rush, and Pamela Asis-Layugan, eds. Policy Actions for COVID-19 Economic Recovery: A Compendium of Policy Briefs. Asian Development Bank, July 2021. http://dx.doi.org/10.22617/spr210233-2.
Повний текст джерелаBaral, Aniruddha, Jeffery Roesler, and Junryu Fu. Early-age Properties of High-volume Fly Ash Concrete Mixes for Pavement: Volume 2. Illinois Center for Transportation, September 2021. http://dx.doi.org/10.36501/0197-9191/21-031.
Повний текст джерелаRobertson, M. C. Radial cutting torch. Office of Scientific and Technical Information (OSTI), January 1997. http://dx.doi.org/10.2172/420393.
Повний текст джерелаKramer, Richard Michael Jack. Cutting Tetrahedra by Node Identifiers. Office of Scientific and Technical Information (OSTI), May 2015. http://dx.doi.org/10.2172/1459088.
Повний текст джерелаShin. Cutting to make a lace. Ames: Iowa State University, Digital Repository, November 2015. http://dx.doi.org/10.31274/itaa_proceedings-180814-1243.
Повний текст джерелаLawphongpanich, Siriphong. A Nontangential Cutting Plane Algorithm. Fort Belvoir, VA: Defense Technical Information Center, June 2001. http://dx.doi.org/10.21236/ada389937.
Повний текст джерелаRobinson, Sam, Peter Blau, and Robert Lacombe. Coated Cutting Tool Insert Development. Office of Scientific and Technical Information (OSTI), May 1997. http://dx.doi.org/10.2172/770389.
Повний текст джерелаRouth, R. D. Assembly procedure for column cutting platform. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/48701.
Повний текст джерела