Добірка наукової літератури з теми "Stackable"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Stackable".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Stackable"
Xie, Han, Lei Zhiquan, Radoslav Z. Pavlović, Judith Gallucci, and Jovica D. Badjić. "Stackable molecular chairs." Chemical Communications 55, no. 38 (2019): 5479–82. http://dx.doi.org/10.1039/c9cc01664c.
Повний текст джерелаLavine, M. S. "CHEMISTRY: Stackable Conductors." Science 300, no. 5623 (May 23, 2003): 1205b—1205. http://dx.doi.org/10.1126/science.300.5623.1205b.
Повний текст джерелаLoepere, Keith. "Stackable thread mechanisms." ACM SIGOPS Operating Systems Review 39, no. 4 (October 2005): 4–17. http://dx.doi.org/10.1145/1088446.1088447.
Повний текст джерелаBrown, Michael D., Ben T. Cox, and Bradley E. Treeby. "Stackable acoustic holograms." Applied Physics Letters 116, no. 26 (June 29, 2020): 261901. http://dx.doi.org/10.1063/5.0009829.
Повний текст джерелаEnrique, Lluis, Povilas Cepaitis, Diego Ordoñez, and Carlos Piles. "CASTonCAST: Architectural freeform shapes from precast stackable components." VLC arquitectura. Research Journal 3, no. 1 (April 28, 2016): 85. http://dx.doi.org/10.4995/vlc.2016.4291.
Повний текст джерелаMarrero-Berrios, Ileana, Anil Shrirao, Charles P. Rabolli, Rishabh Hirday, Rene S. Schloss, and Martin L. Yarmush. "Multi-layer stackable tissue culture platform for 3D co-culture." TECHNOLOGY 08, no. 01n02 (March 2020): 37–49. http://dx.doi.org/10.1142/s233954782050003x.
Повний текст джерелаWang, Ching Wu, Tsun Kai Hsu, Ji Han Wu, Jui Hsiang Cheng, Chew Wei Yang, and Ti Chun Yeh. "An Optimal Rapid Energy-Storing Design for the Stackable Piezoelectric Power Generation Devices." Advanced Materials Research 590 (November 2012): 189–94. http://dx.doi.org/10.4028/www.scientific.net/amr.590.189.
Повний текст джерелаHermiller, Susan, and Conchita Martínez-Pérez. "HNN extensions and stackable groups." Groups, Geometry, and Dynamics 12, no. 3 (August 13, 2018): 1123–58. http://dx.doi.org/10.4171/ggd/467.
Повний текст джерелаLee, D., J. Riddle, S. Lathrop, and J. Bollinger. "Synthesis of Stackable Pseudo-Triphenylenes." Synfacts 2006, no. 11 (November 2006): 1123. http://dx.doi.org/10.1055/s-2006-949466.
Повний текст джерелаMurawski, Pamela. "Stackable Credentials Deliver Widespread Benefits." Journal - American Water Works Association 111, no. 10 (October 2019): 70–73. http://dx.doi.org/10.1002/awwa.1384.
Повний текст джерелаДисертації з теми "Stackable"
Guerra, Jorge. "Improving Storage with Stackable Extensions." FIU Digital Commons, 2012. http://digitalcommons.fiu.edu/etd/706.
Повний текст джерелаBarraca, João Paulo Silva. "Establishment of stackable community networks." Doctoral thesis, Universidade de Aveiro, 2012. http://hdl.handle.net/10773/11281.
Повний текст джерелаUma das áreas de investigação em Telecomunicações de interesse crescente prende-se com os futuros sistemas de comunicações móveis de 4a geração e além destes. Nos últimos anos tem sido desenvolvido o conceito de redes comunitárias, no qual os utilizadores se agregam de acordo com interesses comuns. Estes conceitos têm sido explorados de uma forma horizontal em diferentes camadas da comunicação, desde as redes comunitárias de comunicação (Seattle Wireless ou Personal Telco, p.ex.) até às redes de interesses peer-to-peer. No entanto, estas redes são usualmente vistas como redes de overlay, ou simplesmente redes de associação livre. Na prática, a noção de uma rede auto-organizada, completamente orientada ao serviço/comunidade, integralmente suportada em termos de arquitetura, não existe. Assim este trabalho apresenta uma realização original nesta área de criação de redes comunitárias, com uma arquitetura subjacente orientada a serviço, e que suporta integralmente múltiplas redes comunitárias no mesmo dispositivo, com todas as características de segurança, confiança e disponibilização de serviço necessárias neste tipo de cenários (um nó pode pertencer simultaneamente a mais do que uma rede comunitária). Devido à sua importância para os sistemas de redes comunitárias, foi dado particular atenção a aspetos de gestão de recursos e controlo de acessos. Ambos realizados de uma forma descentralizada e considerando mecanismos dotados de grande escalabilidade. Para isso, é apresentada uma linguagem de políticas que suporta a criação de comunidades virtuais. Esta linguagem não é apenas utilizada para o mapeamento da estrutura social dos membros da comunidade, como para, gerir dispositivos, recursos e serviços detidos pelos membros, de uma forma controlada e distribuída.
One of the research areas with increasing interest in the field of telecommunications, are the ones related to future telecommunication systems, both 4th generation and beyond. In parallel, during the last years, several concepts have been developed related to clustering of users according to their interested, in the form of community networks. Solutions proposed for these concepts tackle the challenges horizontally, for each layer of the communication stack, ranging from community based communication networks (e.g. Seattle Wireless, or Personal Telco), to interest networks based on peer-to-peer protocols. However, these networks are presented either as free joining, or overlay networks. In practice, the notion of a self-organized, service and community oriented network, with these principles embedded in its design principles, is yet to be developed. This work presents an novel instantiation of a solution in the area of community networks, with a underlying architecture which is fully service oriented, and envisions the support for multiple community networks in the same device. Considerations regarding security, trust and service availability for this type of environments are also taken. Due to the importance of resource management and access control, in the context of community driven communication networks, a special focus was given to the support of scalable and decentralized management and access control methods. For this purpose, it is presented a policy language which supports the creation and management of virtual communities. The language is not only used for mapping the social structure of the community members, but also to, following a distributed approach, manage devices, resources and services owned by each community member.
Vairani, Franco 1973. "bitCar : design concept for a collapsible stackable city car." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/49717.
Повний текст джерелаPage 214 blank.
Includes bibliographical references (p. 209-213).
Problems associated with the massive adoption of automobiles have become the center of a world-wide debate. While new technologies will eventually discover a sustainable solution to the environmental concerns (pollution, depletion of energy sources), cities will continue struggling to accommodate the increasing number of cars. The ability for people to move quickly across large distances and the infrastructure required by the automobile (mainly roads and parking) have also created an unsustainable urban landscape in many countries. The argument of this work is that these problems are partly the result of an outdated set of design premises for the automobile which have not changed since it appeared in the late 1800's. A typical car is too big, too heavy, most of the times it only transports one person for a few miles, and then it remains unused for 95% of the time. These inefficiencies multiplied by the staggering number of vehicles in circulation have resulted in huge energy losses, pollution and vast portions of the city lost in support systems for the car. The work discussed here proposes a different approach to urban transportation, by combining the advantages of mass transit with the convenience of personal mobility. Instead of designing automobiles to fullfil any kind of travel need and additional parking structures destined to accommodate 85% of these automobiles, this work proposes a reconfiguration of the car based on the characteristics of the majority of vehicular urban travel.
(cont.) The design of the car operates on a shared-ownership model, with a collapsible structure that allows vehicles to contract and park in stacks. Based on the available data, results indicate that such a design could potentially reduce the actual space requirements for a car between 1/20th and 1/75th. The design of the car is complemented by the use of electric in-wheel motors, developed in connection with the Smart Cities group run at the MIT Media Laboratory under the supervision of Professor Mitchell, for additional efficiency, especially in terms of energy consumption.
by Fanceo Vairani.
Ph.D.
Fu, Jody (Jody C. ). "Manufacturing and design of low cost stackable drawer for mass production." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/114058.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages [112]-113).
This thesis explores a next generation storage unit design for warehouses that increases stiffness, decreases assembly time, maintains or improves gross cubic utilization (GCU) - the amount of total available space that is actually utilized by product within the unit-while minimizing costs related to onsite assembly, shipping, packaging and manufacturing. This work focuses specifically on a stackable based storage solution in which machinery could stack and unstack different totes to stow and retrieve product. This is a descriptive thesis of the engineering design process - problem and goal identification, background research, functional requirements, creative idea generation and analysis, concept selection and iteration, design verification, and implementation - is used to propose a solution. Concept designs are primarily explored in CAD models. Designs are verified and analyzed for mechanical integrity through finite element analysis and manufacturing, packaging and assembly costs are analyzed to ensure feasible implementation. The proposed design weighed 3701b, had 82.5% GCU and took about 17.2 minutes to assemble. The manufacturing costs were $376.52; the packaging and logistics costs were $24.98 and $15.72 respectively; the onsite assembly costs resulted in $11.70. These costs totaled up to $429.52 for a stackable pod.
by Jody Fu.
M. Eng. in Manufacturing
Joh, Youngjun. "Cost analysis and comparison of tray container style storage and stackable tote style storage." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/118715.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (page 49).
With the emerging interest in automated distribution centers, shelves operated by mobile robots are also rising in importance. This paper focuses on comparing the cost of two potential shelf designs for storing product in an automated distribution center, a tray container style shelf and a stackable tote style shelf. Tray container style shelf has lower manufacturing costs, assembly cost and time, while stackable tote style shelf had competitive edge on packaging and shipping costs, and space utilization. The manufacturing cost, packaging cost, and shipping costs $174.44, $59.77, and $39.04 respectively for tray container shelf, and $380.83, $25.98, and $16.9 for stackable tote shelf. The assembly time and space utilization were 8 minutes and 81.5% for tray container shelf, and 17.2 minutes and 84.4% for stackable totes. Overall, stackable tote shelves cost 55% more, but have 2.9% space utilization advantage, which can have more cost savings in an urban distribution center.
by Youngjun Joh.
M. Eng. in Advanced Manufacturing and Design
Mattoon, D. Stan. "Short-term certificates: Case studies of three California community colleges." Scholarly Commons, 2009. https://scholarlycommons.pacific.edu/uop_etds/2386.
Повний текст джерелаHansson, Åsa, and Månsson Anna Lundblad. "Busar eller stackare? : En studie om samarbetet mellan socialtjänst och polis." Thesis, Karlstads universitet, Institutionen för sociala och psykologiska studier, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-33422.
Повний текст джерелаSyftet med denna uppsats var att undersöka hur organisationerna socialtjänsten och polisen samarbetar. Det har visat sig, precis som Fridolf (2001) påstår i sin rapport, att samarbete inte är målet i sig utan en resurs för att skapa en bättre process och ett bättre resultat. Vi använde oss av kvalitativ metod för att utföra vår studie. Vi utförde därmed kvalitativa intervjuer där tre socialtjänstarbetare och tre poliser har deltagit från samma kommun för att svara på våra frågor. För att analysera vårt resultat har vi använt oss av systemteori och organisationsteori. Fungerar inte arbetet mellan de båda organisationerna kan detta bli förödande för individen. Resultatet av vår studie visar att inom denna specifika kommun fungerar samarbetet mycket bra. De skäl som nämns är att samarbetet har pågått under en lång tid och att man därför har lyckats bygga upp en god strategi som fungerar väl. Andra skäl som nämns är att just denna kommun är förhållandevis liten, vilket i sin tur leder till att närheten till varandra gör att man lätt kan få kontakt och att man vet vilka alla de som är involverade är. Det som kan ses som negativt i samarbetet och som ibland kan skapa friktion mellan dem, är det faktum att polisen och socialtjänsten inte alltid får samma bild av ungdomen de arbetar gemensamt med. Detta eftersom de båda aktörerna oftast får se ungdomen i olika sammanhang. Polisen ser ungdomen från perspektivet förövare och socialtjänst ser ungdomen från perspektivet hjälpbehövande. I och med detta bemöter de olika aktörerna ungdomen på olika sätt. Detta är något som från båda håll kan ses som ofördelaktigt i vissa tillfällen vilket med andra ord kan skapa friktion i samarbetet.
Liljekvist, Jessica, and Cedergren Emmelie Wiss. ""En liten stackare som man ska tycka synd om" : Om socialarbetares syn på prostitution ur ett offer- och aktörsperspektiv." Thesis, Linnéuniversitetet, Institutionen för socialt arbete, SA, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-12140.
Повний текст джерелаKangeryd, Gustaf, and Isabelle Henningsson. "Vem är skurk och vem är stackare? : Social kategorisering och tillhörighet- en sociologisk studie om socionomstudenters bedömning av normbrytande handlingar." Thesis, Karlstads universitet, Institutionen för sociala och psykologiska studier (from 2013), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-68284.
Повний текст джерелаGachet, Céline. "Evolution bio-physico-chimique des déchets enfouis au Centre de Stackage de Déchets Ultimes du SYDOM du Jura sous l'effet de la recirculation des lixiviats." Lyon, INSA, 2005. http://theses.insa-lyon.fr/publication/2005ISAL0022/these.pdf.
Повний текст джерелаThe bioreactor landfill is designed to optimize the humidity rate of the waste and the anaerobic biodegradation of the waste organic matter by leachate recirculation. The major interest of leachate recirculation is to increase the gas production rate under controlled moisture content and hence, to reduce the time period of leachate & biogas treatment. In partnership with the SYDOM of Jura and ADEME, leachate recirculation was performed in situ. In the same time, bioreactor cells at laboratory-scale were performed to determine the effect of several physico-chemical factors for the waste biostabilization and to determine the changes in waste organic matter. The bioreactor landfill increase the gas production rate and the waste biodegradation. At pilot with leachate recirculation, organic matter accumulate to much higher level in the leachate. In pilot with leachate recirculation, organic matter is more stable than organic matter of waste in pilot without leachate recycling
Книги з теми "Stackable"
Stokes, Jack. Stackalee and Mama Medea: Eight plays for stage and readers theatre. [Bloomington, IN]: AuthorHouse, 2004.
Знайти повний текст джерелаLinhart, Sandra Miller. Stackable Paige. Lionheart Group, LLC, 2017.
Знайти повний текст джерелаBuilding Ohio's Workforce through Stackable Credentials. RAND Corporation, 2021. http://dx.doi.org/10.7249/rba207-1.
Повний текст джерелаImaginary Aquarium Stackable Crayon Activity Book. Gakken Plus Co., Ltd., 2019.
Знайти повний текст джерелаIglooBooks and Pamela Barbieri. Super Cute Unicorns Coloring Set: With 16 Stackable Crayons. Igloo Books, 2022.
Знайти повний текст джерелаPapers, Blanked. BeautÉ: A Stackable Decorative Table Book Inspired by Henri Matisse. Independently Published, 2021.
Знайти повний текст джерелаPapers, Blanked. Plaisir: A Stackable Decorative Table Book Inspired by Henri Matisse. Independently Published, 2021.
Знайти повний текст джерелаNational Aeronautics and Space Administration (NASA) Staff. Modular Integrated Stackable Layers (Misl) Mi_battery Board Design Document (Bdd). Independently Published, 2019.
Знайти повний текст джерелаPapers, Blanked. RÊveur: A Stackable Decorative Table Book Inspired by Henri Matisse. Independently Published, 2021.
Знайти повний текст джерелаPapers, Blanked. C'était L'été: A Stackable Decorative Table Book Inspired by Henri Matisse. Independently Published, 2021.
Знайти повний текст джерелаЧастини книг з теми "Stackable"
Hunt, John. "Stackable Traits." In Scala Design Patterns, 103–7. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-02192-8_11.
Повний текст джерелаLaarabi, Haitam, Chiara Boldrini, Raffaele Bruno, Helen Porter, and Peter Davidson. "User-Based Relocation of Stackable Car Sharing." In Communications in Computer and Information Science, 256–73. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-02907-4_13.
Повний текст джерелаQu, Shichun, and Yong Liu. "Stackable Wafer-Level Analog Chip-Scale Package." In Wafer-Level Chip-Scale Packaging, 63–90. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1556-9_4.
Повний текст джерелаVelázquez-Blázquez, J. S., R. G. Silva-Quituisaca, J. Nieto-Martínez, F. L. Sáez-Gutiérrez, D. Parras-Burgos, and F. J. F. Cañavate. "Conceptual Design of Foldable and Stackable Furniture for Preschool Classrooms." In Lecture Notes in Mechanical Engineering, 86–93. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-41200-5_10.
Повний текст джерелаWang, Yixuan, Shangdong Zheng, Wei Xu, Yang Xu, Tianming Zhan, Peng Zheng, Zhihui Wei, and Zebin Wu. "A Stackable Attention-Guided Multi-scale CNN for Number Plate Detection." In Lecture Notes in Computer Science, 199–209. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-34120-6_16.
Повний текст джерелаHsu, Ming-Han, Ching-Wu Wang, and Tsun-Kai Hsu. "An Optimal Design for the Stackable Piezoelectric Power Generation Device and Its Rapid Energy-Saving Method." In Lecture Notes in Electrical Engineering, 283–90. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21747-0_34.
Повний текст джерелаFarahbakhsh, Mehdi, Alireza Borhani, Negar Kalantar, and Zofia Rybkowski. "PRINT in PRINT: A Nested Robotic Fabrication Strategy for 3D Printing Dissolvable Formwork of a Stackable Column." In Communications in Computer and Information Science, 317–28. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1280-1_20.
Повний текст джерелаGuilbaud, Patrick, and Michael J. Hirsch. "Promoting Equity and Achievement in Real-Time Learning (PEARL): Towards a Framework for the Formation, Creation, and Validation of Stackable Knowledge Units." In Adaptive Instructional Systems, 159–73. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05887-5_12.
Повний текст джерела"Ninja Star and Stackable Cubes." In More Origami with Explanations, 207–37. WORLD SCIENTIFIC, 2020. http://dx.doi.org/10.1142/9789811219474_0007.
Повний текст джерела"78 Stackable Carbon Fiber Cages." In Spinal Instrumentation: Surgical Techniques, edited by Daniel H. Kim, Alexander R. Vaccaro, and Richard G. Fessler. Stuttgart: Georg Thieme Verlag, 2005. http://dx.doi.org/10.1055/b-0034-75902.
Повний текст джерелаТези доповідей конференцій з теми "Stackable"
Strukov, Dmitri, and Alan Mishchenko. "Monolithically stackable hybrid FPGA." In 2010 Design, Automation & Test in Europe Conference & Exhibition (DATE 2010). IEEE, 2010. http://dx.doi.org/10.1109/date.2010.5457117.
Повний текст джерелаPark, Jin Wan. "Mosaic for stackable objects." In ACM SIGGRAPH 2004 Sketches. New York, New York, USA: ACM Press, 2004. http://dx.doi.org/10.1145/1186223.1186225.
Повний текст джерелаOliveira, Fabio, Gorka Guardiola, Jay A. Patel, and Eric V. Hensbergen. "Blutopia: Stackable storage for cluster management." In 2007 IEEE International Conference on Cluster Computing (CLUSTER). IEEE, 2007. http://dx.doi.org/10.1109/clustr.2007.4629243.
Повний текст джерелаLee, Hoyul, Yonghwan Oh, Woong Hee Shon, and Youngjin Choi. "Stackable manipulator for mobile manipulation robot." In 2012 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2012. http://dx.doi.org/10.1109/icra.2012.6224793.
Повний текст джерелаPennelli, Giovanni. "Stackable devices based on chaotic conduction." In 2010 International Workshop on Computational Electronics (IWCE). IEEE, 2010. http://dx.doi.org/10.1109/iwce.2010.5677967.
Повний текст джерелаDerChang Kau, Stephen Tang, Ilya V. Karpov, Rick Dodge, Brett Klehn, Johannes A. Kalb, Jonathan Strand, et al. "A stackable cross point Phase Change Memory." In 2009 IEEE International Electron Devices Meeting (IEDM). IEEE, 2009. http://dx.doi.org/10.1109/iedm.2009.5424263.
Повний текст джерелаGuthmuller, Eric, Ivan Miro-Panades, and Alain Greiner. "Adaptive Stackable 3D Cache Architecture for Manycores." In 2012 IEEE Computer Society Annual Symposium on VLSI (ISVLSI). IEEE, 2012. http://dx.doi.org/10.1109/isvlsi.2012.36.
Повний текст джерелаSingh, Santar Pal, and Hirdesh Kumar. "SSSFS: A Stackable Survivable Storage File System." In 2018 4th International Conference on Computing Communication and Automation (ICCCA). IEEE, 2018. http://dx.doi.org/10.1109/ccaa.2018.8777719.
Повний текст джерелаCrum, T. R., J. Harrison, R. Srinivasan, and R. L. Miller. "Stackable air-cooled heatsinks for diode lasers." In Lasers and Applications in Science and Engineering, edited by Mark S. Zediker. SPIE, 2007. http://dx.doi.org/10.1117/12.701091.
Повний текст джерелаHeidemann, J., and G. Popek. "Performance of cache coherence in stackable filing." In the fifteenth ACM symposium. New York, New York, USA: ACM Press, 1995. http://dx.doi.org/10.1145/224056.224067.
Повний текст джерелаЗвіти організацій з теми "Stackable"
Yang, Yang. Stackable Organic Switches for Reconfigurable Switching Hybrid Systems. Fort Belvoir, VA: Defense Technical Information Center, January 2013. http://dx.doi.org/10.21236/ada578554.
Повний текст джерелаFeng, Wu-chi, and Crawfis, Roger, Weide, Bruce. Stackable middleware services for advanced multimedia applications. Final report for period July 14, 1999 - July 14, 2001. Office of Scientific and Technical Information (OSTI), February 2002. http://dx.doi.org/10.2172/771365.
Повний текст джерела