Добірка наукової літератури з теми "Solid contact"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Solid contact".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Solid contact"
Rachid, Chadouli, and Makhlouf Mohammed. "Modeling of the thermal contact resistance of a solid-solid contact." IOSR Journal of Mechanical and Civil Engineering 11, no. 5 (2014): 72–82. http://dx.doi.org/10.9790/1684-11527282.
Повний текст джерелаMcGraw, Joshua D., Antoine Niguès, Alexis Chennevière, and Alessandro Siria. "Contact Dependence and Velocity Crossover in Friction between Microscopic Solid/Solid Contacts." Nano Letters 17, no. 10 (September 25, 2017): 6335–39. http://dx.doi.org/10.1021/acs.nanolett.7b03076.
Повний текст джерелаWillatzen, Morten, and Zhong Lin Wang. "Contact Electrification by Quantum-Mechanical Tunneling." Research 2019 (August 4, 2019): 1–11. http://dx.doi.org/10.34133/2019/6528689.
Повний текст джерелаMesnyankin, Sergei Yu, Aleksei G. Vikulov, and Dmitrii G. Vikulov. "Solid-solid thermal contact problems: current understanding." Physics-Uspekhi 52, no. 9 (September 30, 2009): 891–914. http://dx.doi.org/10.3367/ufne.0179.200909c.0945.
Повний текст джерелаMesnyankin, S. Yu, A. G. Vikulov, and D. G. Vikulov. "Solid-solid thermal contact problems: current understanding." Uspekhi Fizicheskih Nauk 179, no. 9 (2009): 945. http://dx.doi.org/10.3367/ufnr.0179.200909c.0945.
Повний текст джерелаPhutke, Minakshee, Jenil Dedhia, and A. K. Suresh. "Modelling solid-solid reactions: Contact-point approach." Chemical Engineering Journal 377 (December 2019): 120570. http://dx.doi.org/10.1016/j.cej.2018.12.030.
Повний текст джерелаSun, Linlin, Ziming Wang, Chengyu Li, Wei Tang, and Zhonglin Wang. "Probing Contact Electrification between Gas and Solid Surface." Nanoenergy Advances 3, no. 1 (January 2, 2023): 1–11. http://dx.doi.org/10.3390/nanoenergyadv3010001.
Повний текст джерелаWang, Zong Ren, Jun Yang, Yu Chen, and Wei Fang Zhang. "Experimental Study of Thermal Contact Conductance Across Solid/Solid Interface." Advanced Materials Research 503-504 (April 2012): 1082–85. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.1082.
Повний текст джерелаChang, K. H., and L. C. Witte. "Liquid-Solid Contact During Flow Film Boiling of Subcooled Freon-11." Journal of Heat Transfer 112, no. 2 (May 1, 1990): 465–71. http://dx.doi.org/10.1115/1.2910401.
Повний текст джерелаThierry-Jebali, Nicolas, Olivier Ménard, Arnaud Yvon, Emmanuel Collard, Miao Zhe, Olivier Dezellus, Christian Brylinski, and Jean Claude Viala. "Al-Si-Ti Ohmic Contacts on N-Type Gallium Nitride." Materials Science Forum 679-680 (March 2011): 812–15. http://dx.doi.org/10.4028/www.scientific.net/msf.679-680.812.
Повний текст джерелаДисертації з теми "Solid contact"
Hernández, Malo Rafael. "Solid contact potentiometric sensors based on carbon nanomaterials." Doctoral thesis, Universitat Rovira i Virgili, 2014. http://hdl.handle.net/10803/401334.
Повний текст джерелаEsta tesis aporta un avance en la construcción de electrodos de contacto sólido (SCE) basados en materiales nanoestructurados de carbono. Se verifica por una parte, la posibilidad de utilización de los nanotubos de carbono de capa simple (SWCNTs) para la determinación de iones en muestras reales complejas como es la savia vegetal. Adicionalmente, se lleva a cabo la utilización del grafeno modificado químicamente como elemento transductor en los electrodos de estado sólido determinando su mecanismo de transducción y como prueba de su funcionamiento se llevan a cabo dos electrodos, por una parte un electrodo selectivo de iones (ISE) para la determinación de calcio, y por otra parte, un aptasensor para la determinación selectiva de Staphylococcus aureus.
This thesis provides a breakthrough in the construction of solid contact electrode (SCE) based on nanostructured carbon materials. It is checked the possibility of using single walled carbon nanotubes (SWCNTs) for the determination of ions in real complex samples such as plant sap. Additionally, the use of chemically modified graphene is performed as a transducer in solid state electrodes to determine the transduction mechanism. As a proof of concept two electrodes have been developed, in one hand, an ion-selective electrode (ISE) for the determination of calcium, and on the other one, an aptasensor for the selective detection of Staphylococcus aureus.
Parel, Kurien Stephen. "An analysis of contact stiffness and frictional receding contacts." Thesis, University of Oxford, 2017. http://ora.ox.ac.uk/objects/uuid:3c29863a-b0cf-4870-851d-261be72f457f.
Повний текст джерелаPapillon, Anthony. "Frittage de composites Cu-Cr pour l'élaboration de matériaux de contact d'ampoules à vide." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAI099.
Повний текст джерелаCu-Cr composites are commonly used as contact materials for medium voltage circuit breakers vacuum bottles. Solid state sintering process of Cu-Cr composites is widespread but has been relatively little studied. Optimizing the process requires understanding the sintering mechanisms. This study was focused on two important aspects of sintering: the redox reactions associated to oxides on the powder surface and the competition between densification and swelling mechanisms during sintering.The redox reactions were studied by thermogravimetric analysis coupled to various spectroscopic techniques, first on isolated Cu and Cr, then on Cu-Cr composites. Interfaces analyses obtained by FIB clarified the location of the oxide inside the sintered materials. Oxygen transfer takes place between copper and chromium powders. This phenomenon strongly depends on the reducing character of the sintering atmosphere.Densification was analyzed by dilatometry on Cu, Cr and Cu-Cr composites. This analysis was supported by microstructural observations, including X-ray tomography .The effect of process parameters (atmosphere, heating rate, powders ...) was studied. The results show the relationship between sintering and copper oxide reduction. The swelling phenomenon of copper compacts is explained by high temperature degassing of copper during pore closure. This swelling does not occur in Cu-Cr composites as chromium delays pore closing and entraps the gases released by copper. Sintering atmosphere, chromium morphology and chromium particle size affect densification. Vacuum sintering reduces porosity. Chromium particles with spherical shape limit its inhibiting effect on densification. For small particle sizes, chromium participates to densification, leading to better densification of the material. These results open the route for optimizing the sintering of Cu-Cr composites.Cu-Cr composites were tested for short circuit performance in vacuum interrupters. The result of these tests showed the importance of reducing the chromium oxide amount. The effect of impurities commonly encountered on the powders copper and chromium powders was also determined
Brunetti, Jacopo. "Mechanical energy balance of frictional contacts : From surface to solid energy dissipation in contact dynamic instabilities." Thesis, Lyon, INSA, 2015. http://www.theses.fr/2015ISAL0118/document.
Повний текст джерелаWhenever relative motion between two system components occurs, through a dry contact interface, vibrations are induced by the frictional contact. The local dynamics at the contact (ruptures and wave generation) couples with the system dynamics, giving origin to vibrations and affecting the macroscopic frictional behavior of the system. In this thesis, in order to develop an overall approach to the investigation of the multi-physic phenomenon, the energy has been pointed out as a coupling physical characteristic among the several phenomena at the different scales. The formulation of a mechanical energy balance is used for distinguishing between two different dissipative terms, i.e. the dissipation by material/system damping and the dissipation at the contact. The energy flows coming from the frictional surfaces, by friction induced vibrations, excites the dynamic response of the system, and vice versa the influence of the system dynamic response on the local energy dissipation at the contact interface affects the related tribological phenomena. The friction-induced vibrations have been analyzed using three different approaches: the finite element approach, to investigate the coupling between the contact and system dynamics by the analysis of the energy flows; the experimental approach to validate the numerical results and observe the influence of phenomena not still included into the numerical model; a lumped parameter model approach to quickly investigate the effects of the system parameters. The numerical analysis by the 2D finite element model allowed investigating the repartition of the energy introduced into the mechanical system between the two dissipative terms (material damping and contact) during both stable and unstable friction-induced vibrations. In particular, it has been shown how the friction-induced vibrations modify the overall capacity of the system to absorb and dissipate energy; an estimation of the power dissipated at the contact, without considering the dynamic behavior of the system (energy flows by friction induced vibrations) can lead to significant error in the quantification of the dissipated energy at the contact, which affects directly several tribological phenomena. The experimental squeal measurements show how the same unstable modes are recovered both experimentally and numerically, validating the use of the 2D transient simulations for the reproduction of the unstable friction-induced vibrations. Once the energy balance formulated, it has been used on the lumped model to approach the instability over-prediction issue characteristic of the complex eigenvalue analysis. By energy considerations, a newer instability index (MAI) has been defined to compare the different unstable modes and to select the mode that becomes effectively unstable during the transient response. The Modal Absorption Index allows quantifying the capability of each mode to exchange energy with the external environment
Crespo, Paravano Gastón Adrián. "Solid contact ion selective electrodes based on carbon nanotubes." Doctoral thesis, Universitat Rovira i Virgili, 2010. http://hdl.handle.net/10803/9050.
Повний текст джерелаPotentiometric classical ion selective electrodes (ISEs) have been used for analytical applications since the beginning of 1900's. Determination of pH by a glass membrane ion selective electrode emerged at the beginning, being the first ISEs developed. pH glass electrode is still one the most useful and robust sensors for routine measurements both in laboratories and industries.
Throughout the years, new technologies, ideas and designs have been developed and incorporated successfully in the potentiometric fields so as to provide answers to the new society's needs. Therefore, the ion selective electrodes developed in this thesis are a step further in the progress of ISEs and must be considered as products of the scientific envisioning, growth, and interdisciplinary cooperation of many research teams over many years of continuous efforts.
The sensing part can be regarded nowadays as well developed, although it has been during only the last few years when considerable improvements have taken place in the development of new polymeric membranes, ionophores and lipophilic ions. Moreover, the understanding of the theoretical sensing mechanism has been a powerful solid backbone in the rise of ISEs.
Miniaturization of classical ISEs requires making all solid contact electrodes to avoid the intrinsic drawbacks of the inner solution. In this manner, the transduction layer has been the focus of attention for the two last decades. New solid contact transducers having the capacity to convert an ionic current into an electronic current have been emerging. Within them, conducting polymers have played an important role in the transduction of the potentiometric signal, being the most used in solid contact ion selective electrodes (SC-ISEs) up to now. However, the behaviour of conducting polymers can be further improved. For instance, their sensitivity to light one of main operational issues yet to be solved.
In the present context of searching for new materials able to transduce potentiometric signals we selected and tested carbon nanotubes (CNTs). CNTs, which were rediscovered by Ijima in 1991, display excellent electronic properties in terms of signal transduction. In addition, due to their chemical reactivity CNTs can be easily functionalized with receptors or other functional groups. In fact, depending on the type of functionalization the macroscopic and microscopic properties of CNTs can be drastically changed. This nanostructured material had not been used previously as a solid contact material in ISEs.
The main aim of this thesis is to demonstrate that CNTs can act as a clean and efficient transducer in SC-ISEs overcoming the drawbacks displayed by the previously assayed solid contact materials. The developed electrodes were used in different conditions to determine several ions in different sample types, demonstrating the capabilities of this nanostructured material.
The thesis has been structured in different chapters, each one containing the following information:
· Chapter 1 provides a short historical overview of potentiometric ISEs. The evolution from the "classical ISEs" to the SC-ISEs is briefly illustrated. Once the motivation for thesis is described, the general and specific objectives of the thesis are reported.
· Chapter 2 reports the scientific foundations of the developed electrodes. All components of the ISE, sensing layer, transducers and detection systems are introduced. Analytical performance characteristics of ISEs are also described.
· Chapter 3 corresponds to the experimental part. Reagents, protocols, procedures and instruments used in the thesis are reported.
· Chapter 4 provides the demonstration that CNTs can act as a transducer layer in SC-ISEs. The first SC-ISEs based on CNTs are characterized by electrochemical and optical techniques.
· Chapter 5 contains the experimental results that lead to the elucidation of the possible transduction mechanism of CNTs in SC-ISEs. Electrochemical impedance spectroscopy (EIS) is employed as the main characterization technique.
· Chapter 6 is composed of four sections reporting different analytical applications. In the first section, the common pH electrode is developed using a solid contact technology based on CNTs. In the second section, the development of SC-ISEs based on a new synthetic ionophore selective to choline, and CNTs as transducers is shown. In the third section, watertight and pressure-resistant SC-ISEs based on CNTs are developed and tested in aquatic research to obtain information about the gradient profiles along the depth of the lakes. In the fourth section, SC-ISEs based on CNTs are adapted for the on-line control of a denitrification catalytic process.
· Chapter 7 reports the possibilities of miniaturization of the SC-ISEs based on CNTs to reach a nanometric electrode. Potentiometric and optical characterizations are described in this section. Moreover, a discussion about the limitations of the real miniaturization in potentiometry is undertaken.
· Chapter 8 points out the conclusions of the thesis. In addition, future prospects are suggested.
· Finally, several appendices are added to complete the doctoral thesis.
El principal objetivo de esta tesis es el desarrollo de electrodos selectivos de iones de contacto sólido, ESIs-CS, utilizando como capa transductora una red compuesta de nanotubos de carbono.
Los electrodos potenciométricos selectivos de iones han sido utilizados en aplicaciones analíticas desde comienzos de 1900. La determinación de pH mediante electrodos de vidrio selectivo de iones fue el primer ESI desarrollado. Hoy en día, el electrodo de vidrio para la determinación de pH es todavía uno de los más útiles y robustos sensores utilizados en mediciones rutinarias tanto en laboratorios como en industrias.
A lo largo de los años, nuevas tecnologías, ideas y diseños han sido desarrollados e incorporados satisfactoriamente en el campo potenciométrico proporcionando soluciones a las necesidades en continua evolución de la sociedad. De esta manera, los electrodos selectivos de iones desarrollados en esta tesis son un paso más en el progreso de los ESIs y deben ser considerados como el producto de una sólida base científica, del crecimiento y de la cooperación interdisciplinaria de diversos grupos de investigación durante varios años.
La parte del sensor donde tiene lugar el reconocimiento químico y donde se genera el potencial dependiente de la muestra en estudio en los ESIs se puede considerar, en estos días, ampliamente desarrollada, aunque considerables mejoras han tenido lugar durante los últimos años, especialmente en el desarrollo de nuevas membranas poliméricas, ionóforos e iones lipofílicos. Sobretodo, el estudio y la comprensión del mecanismo teórico del sensor ha sido muy importante en el crecimiento y desarrollo de los ESIs.
El concepto de electrodos selectivos de iones de estado sólido surge como requisito vital para evitar las intrínsecas desventajas de la solución interna, en el proceso de miniaturización de los ESIs clásicos. De esta forma, la capa transductora ha sido el principal punto de atención durante dos décadas. Así, nuevos transductores de contacto sólido con la capacidad de convertir una corriente iónica en una corriente electrónica han sido desarrollados. Entre ellos, los polímeros conductores han jugado un importante papel en la transducción de la señal potenciométrica, siendo éstos los más empleados en los electrodos selectivos de iones de contacto sólido (ESIs-CS). Sin embargo el comportamiento de los polímeros conductores puede ser mejorado. Por ejemplo, la sensibilidad hacia la luz de estos materiales es un inconveniente todavía no resuelto.
En este contexto de investigación de nuevos materiales capaces de actuar como transductor de una señal potenciométrica, se han escogido y estudiado los nanotubos de carbono (NTCs) como transductores. Los NTCs fueros redescubiertos por Ijima en 1991, y muestran excelentes propiedades electrónicas en términos de traducción de señal. Además, debido a su reactividad química, los NTCs pueden ser fácilmente funcionalizados con receptores u otros grupos funcionales. De hecho, sus propiedades macroscópicas y microscópicas pueden ser afectadas drásticamente dependiendo del tipo y grado de funcionalización. Este material nanoestructurado no había sido previamente utilizado como transductor en ISEs.
El principal propósito de esta tesis es demostrar que los nanotubos de carbono pueden actuar de forma eficiente como transductor en electrodos selectivos de iones de estado sólido logrando vencer las desventajas de los transductores previamente mencionados. Los electrodos desarrollados fueron usados en diferentes condiciones para determinar distintos iones en diversos tipos de sistemas, demostrando las extraordinarias capacidades de este material nanoestructurado.
Esta tesis ha sido estructurada en capítulos que contienen la siguiente información:
· El Capítulo 1 proporciona una breve visión histórica de lo electrodos potenciométricos selectivos de iones. Se ilustra la evolución desde los "clásicos ESIs" hasta los actuales "ESIs-CS". Además se señalan en esta sección los objetivos generales y específicos.
· El Capitulo 2 contiene las bases científicas de los electrodos desarrollados. Se introducen todos los componentes que integran un ESI, tales como: capa reconocedora, capa transductora y sistema de detección. A continuación se describen los parámetros analíticos de calidad de los ESIs.
· El Capitulo 3 describe la parte experimental. Se recogen los reactivos, protocolos, procedimientos e instrumentos usados a lo largo de la tesis.
· El Capitulo 4 provee de la demostración de que los NTCs pueden actuar eficientemente como capa transductora en SC-ISEs. Se caracteriza el primer ESI-CS integrado por NTCs mediante técnicas ópticas y electroquímicas.
· El Capitulo 5 contiene los resultados experimentales que permiten la posible elucidación del mecanismo de transducción de los NTCs en los ESIs-CS. La Espectroscopia de Impedancia Electroquímica (ESI) es utilizada como la principal técnica de caracterización.
· El Capitulo 6 está integrado por cuatro secciones con diferentes aplicaciones analíticas. En la primera sección, se desarrolla un electrodo de pH que usa NTCs como nueva tecnología transductora en ESIs-CS. En la segunda sección se muestra el desarrollo de un ESI-CS integrado por un ionóforo sintético selectivo a colina, y NTCs como transductores. En la tercera sección, ESIs-CS basados en NTCs, resistentes a altas presiones y totalmente herméticos, se desarrollan y prueban en investigaciones acuáticas con la finalidad de obtener información sobre los gradientes de concentración de iones en función de la profundidad de un lago. En la cuarta sección ESIs-CS basados en NTCs se adaptan para el control on-line de un proceso catalítico de desnitrificación.
· El Capitulo 7 presenta la posibilidad de la miniaturización de los ESIs-CS basados en NTCs logrando obtener un electrodo nanométrico. Se muestran en esta sección la caracterización óptica y potentiométrica. Además, se discuten las limitaciones de la miniaturización real de los ESIs en potenciometría.
· El Capitulo 8 contiene las conclusiones de la tesis. Adicionalmente, se sugieren las perspectivas futuras del trabajo presentado.
· Finalmente, se añaden algunos apéndices como complemento de la tesis doctoral.
Mukherjee, Manas. "Bubble Solid Interaction." Thesis, Indian Institute of Science, 2004. http://hdl.handle.net/2005/78.
Повний текст джерелаPham, Phong Ngoc. "Origin of shear-induced diffusion in particulate suspensions : crucial role of solid contacts between particles." Thesis, Aix-Marseille, 2016. http://www.theses.fr/2016AIXM4706/document.
Повний текст джерелаEven at low Reynolds number, particles within a shear flow exhibit irreversible dynamics. Many theories have been put forth to explain this phenomenon, the origin of irreversibility remains unclear. An integrated program of experimental and computational studies has been performed to assess the origin of the irreversible behavior of particles. Numerical simulations were used to evaluated the relative importance of long-range hydrodynamic interactions, lubrication, and contact forces. By isolating contribution of these interactions, we have shown that neither the long-range hydrodynamic interactions nor the lubrication are responsible for irreversibility. Solid contacts between particles largely dominate this phenomenon. However, producing realistic results requires both contact interactions and lubrication. Two different experiments were performed to address the role of contacts between particles in sheared suspensions. In the first experiment, the particle trajectories are irreversible during the first cycle but reversible for the next cycles. By showing that the magnitude of irreversibility increases with the particle roughness, we provide direct evidence that contacts occur in viscous flow. Experimental particle trajectories are well captured by the numerical model. In the second experiment, performed in a homogeneous suspension, the role of solid collisions was also revealed by showing that the critical strain amplitude depends on the particle roughness. A geometrical model based on the assumption that colliding particles produce irreversibility was derived. The model successfully reproduces the measured values of the critical strain amplitude
Jelagin, Denis. "Frictional Effects on Hertzian Contact and Fracture." Doctoral thesis, KTH, Hållfasthetslära (Avd.), 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4535.
Повний текст джерелаQC 20100729
Hahn, Carsten. "Models, algorithms and software concepts for contact and fragmentation in computational solid mechanics /." Hannover : Institut für Baumechanik und Numerische Mechanik, 2006. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=015469864&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Повний текст джерелаZhang, Yilei. "The effect of surface roughness parameters on contact and wettability of solid surfaces." [Ames, Iowa : Iowa State University], 2007.
Знайти повний текст джерелаКниги з теми "Solid contact"
1949-, Sokołowski Jan, ed. Modelling and control in solid mechanics. Basel: Birkhäuser, 1997.
Знайти повний текст джерелаAtlas of point contact spectra of electron-phonon interactions in metals. Boston: Kluwer Academic, 1995.
Знайти повний текст джерелаRon, Kaspriske, ed. Solid contact: A top coach's guide to learning your swing DNA and instantly striking the ball better than ever. New York: Gotham, 2012.
Знайти повний текст джерелаContact and frictional electrification. Morgan Hill, Calif: Laplacian Press, 1998.
Знайти повний текст джерелаPopp, Alexander, and Peter Wriggers, eds. Contact Modeling for Solids and Particles. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-90155-8.
Повний текст джерелаKalker, J. J. Three-dimensional elastic bodies in rolling contact. Dordrecht: Kluwer Academic Publishers, 1990.
Знайти повний текст джерелаMaugis, Daniel. Contact, Adhesion and Rupture of Elastic Solids. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000.
Знайти повний текст джерелаMaugis, Daniel. Contact, Adhesion and Rupture of Elastic Solids. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-04125-3.
Повний текст джерелаMatasci, Raymond N. Trickling filter/solids contact process: Full-scale studies. Cincinnati, OH: U.S. Environmental Protection Agency, Research and Development, Water Engineering Research Laboratory, 1986.
Знайти повний текст джерелаAleksandrov, V. M. Three-dimensional contact problems. Dordrecht, The Netherlands: Kluwer Academic Publishers, 2001.
Знайти повний текст джерелаЧастини книг з теми "Solid contact"
Barber, J. R. "Frictionless Contact." In Solid Mechanics and Its Applications, 241–47. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2454-6_21.
Повний текст джерелаBarber, J. R. "Receding Contact." In Solid Mechanics and Its Applications, 221–32. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-70939-0_11.
Повний текст джерелаBarber, J. R. "Thermoelastic Contact." In Solid Mechanics and Its Applications, 395–432. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-70939-0_17.
Повний текст джерелаBarber, J. R. "Hertzian Contact." In Solid Mechanics and Its Applications, 29–41. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-70939-0_3.
Повний текст джерелаBarber, J. R. "Frictionless Contact." In Solid Mechanics and Its Applications, 449–57. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3809-8_29.
Повний текст джерелаBhushan, Bharat. "Contact between Solid Surfaces." In Tribology and Mechanics of Magnetic Storage Devices, 157–230. New York, NY: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4684-0335-0_3.
Повний текст джерелаBhushan, Bharat. "Contact between Solid Surfaces." In Tribology and Mechanics of Magnetic Storage Devices, 157–230. New York, NY: Springer New York, 1996. http://dx.doi.org/10.1007/978-1-4612-2364-1_3.
Повний текст джерелаWriggers, Peter. "Continuum Solid Mechanics and Weak Forms." In Computational Contact Mechanics, 31–56. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/978-3-540-32609-0_3.
Повний текст джерелаIbrahimbegovic, Adnan. "Changing boundary conditions: contact problems." In Nonlinear Solid Mechanics, 361–92. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-2331-5_5.
Повний текст джерелаBarber, J. R. "Plane Contact Problems." In Solid Mechanics and Its Applications, 139–63. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2454-6_12.
Повний текст джерелаТези доповідей конференцій з теми "Solid contact"
Levin, David I. W., Joshua Litven, Garrett L. Jones, Shinjiro Sueda, and Dinesh K. Pai. "Eulerian solid simulation with contact." In ACM SIGGRAPH 2011 papers. New York, New York, USA: ACM Press, 2011. http://dx.doi.org/10.1145/1964921.1964931.
Повний текст джерелаKumar, T. S. Prasanna, Nikhil Mahalingesh, S. Prajwal, Noel Godwin Saldanha, T. R. Seetharam, and K. N. Seetharamu. "ESTIMATION OF SOLID-SOLID CONTACT CONDUCTANCE BASED ON INVERSE SOLUTION." In Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017). Connecticut: Begellhouse, 2018. http://dx.doi.org/10.1615/ihmtc-2017.2050.
Повний текст джерелаGahoi, A., S. Kataria, and M. C. Lemme. "Temperature dependence of contact resistance for gold-graphene contacts." In ESSDERC 2017 - 47th IEEE European Solid-State Device Research Conference (ESSDERC). IEEE, 2017. http://dx.doi.org/10.1109/essderc.2017.8066604.
Повний текст джерелаPassi, V., A. Gahoi, J. Ruhkopf, S. Kataria, F. Vaurette, E. Pallecchi, H. Happy, and M. C. Lemme. "Contact resistance Study of “edge-contacted” metal-graphene interfaces." In ESSDERC 2016 - 46th European Solid-State Device Research Conference. IEEE, 2016. http://dx.doi.org/10.1109/essderc.2016.7599629.
Повний текст джерелаKantar, Emre, and Erling Ildstad. "Modeling longitudinal breakdown strength of solid-solid interfaces using contact theory." In 2016 IEEE International Conference on Dielectrics (ICD). IEEE, 2016. http://dx.doi.org/10.1109/icd.2016.7547627.
Повний текст джерелаPop, Nicolae, Theodore E. Simos, George Psihoyios, and Ch Tsitouras. "Quasi-Static Frictional Contact in Solid Mechanics." In NUMERICAL ANALYSIS AND APPLIED MATHEMATICS: International Conference on Numerical Analysis and Applied Mathematics 2009: Volume 1 and Volume 2. AIP, 2009. http://dx.doi.org/10.1063/1.3241228.
Повний текст джерелаKawasaki, Masahiro, Shuji Imazeki, Toshihide Kamata, and Masahiko Ando. "Bottom Contact Organic Thin-Film Transistors with Reduced Contact Resistance." In 2003 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2003. http://dx.doi.org/10.7567/ssdm.2003.p13-9l.
Повний текст джерелаDwyer-Joyce, R. S., J. Zhu, and T. Reddyhoff. "Ultrasonic Measurement for Film Thickness and Solid Contact in Elastohydrodynamic Lubrication." In STLE/ASME 2010 International Joint Tribology Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ijtc2010-41080.
Повний текст джерелаSantos, Ion Willer Dos, and Jánes Landre Júnior. "APPLYING SURFACE CONTACT ON STRUCTURES ASSESSMENT." In 8th International Symposium on Solid Mechanics. ABCM, 2022. http://dx.doi.org/10.26678/abcm.mecsol2022.msl22-0181.
Повний текст джерелаHashimoto, Katsushi, Sen Miyashita, Tadashi Saku, and Yoshiro Hirayama. "Back-Gated Point Contact." In 2000 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2000. http://dx.doi.org/10.7567/ssdm.2000.d-5-2.
Повний текст джерелаЗвіти організацій з теми "Solid contact"
Domning, Edward Ernest. Design and test of a low jitter metal to metal contact solid dielectric switch. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10172324.
Повний текст джерелаNagafuji, Masashi, Mitsuhiro Soejima, Eiji Ogawa, and Takeshi Kuwahara. Studies on Friction Loss of Valve Train With Roller Follower (Influence of Solid Contact Between Cam and Roller). Warrendale, PA: SAE International, September 2005. http://dx.doi.org/10.4271/2005-08-0612.
Повний текст джерелаHigginson, Drew Pitney. Ultra-High-Contrast Laser Acceleration of Relativistic Electrons in Solid Targets. Office of Scientific and Technical Information (OSTI), January 2013. http://dx.doi.org/10.2172/1059459.
Повний текст джерелаRuelas, S., and J. Oakdale. Degradation Studies of Silicone Rubbers in Direct Contact with Corrosive Solids Under Compression. Office of Scientific and Technical Information (OSTI), September 2021. http://dx.doi.org/10.2172/1821817.
Повний текст джерелаPattison, Morgan. Solid-State Lighting 2017 Suggested Research Topics Supplement: Technology and Market Context. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1398749.
Повний текст джерелаAuthor, Not Given. Solid-State Lighting 2017 Suggested Research Topics Supplement: Technology and Market Context. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1413868.
Повний текст джерелаChurney, K. L., and E. S. Domalski. A study of the metal content of municipal solid waste. Final report. Office of Scientific and Technical Information (OSTI), January 1998. http://dx.doi.org/10.2172/587926.
Повний текст джерелаChurney, K. L., A. E. Ledford, S. S. Bruce, and E. S. Domalski. The chlorine content of municipal solid waste from Baltimore County, MD and Brooklyn, NY. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3213.
Повний текст джерелаResearch Institute (IFPRI), International Food Policy. Nutrient and mycotoxin content of commercially-sold premixed infant cereals in Malawi. Washington, DC: International Food Policy Research Institute, 2019. http://dx.doi.org/10.2499/p15738coll2.133335.
Повний текст джерелаArmero, Francisco. Numerical Analysis of Constrained Dynamical Systems, with Applications to Dynamic Contact of Solids, Nonlinear Elastodynamics and Fluid-Structure Interactions. Fort Belvoir, VA: Defense Technical Information Center, December 2000. http://dx.doi.org/10.21236/ada387568.
Повний текст джерела