Готові списки джерел за темами / Solar hybrid system

Добірка наукової літератури з теми "Solar hybrid system"

Автор: Grafiati
Опубліковано: 10 грудня 2022
Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Solar hybrid system".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Solar hybrid system"

1

Lentz, Álvaro, and Rafael Almanza. "Solar–geothermal hybrid system." Applied Thermal Engineering 26, no. 14-15 (October 2006): 1537–44. http://dx.doi.org/10.1016/j.applthermaleng.2005.12.008.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Alktranee, Mohammed, and Péter Bencs. "Overview of the hybrid solar system." Analecta Technica Szegedinensia 14, no. 1 (June 8, 2020): 100–108. http://dx.doi.org/10.14232/analecta.2020.1.100-108.

Повний текст джерела
Анотація:
This paper investigates the uses of solar energy systems in various applications to define the most appropriate system that has highly efficient and reliable. Most of the urban even rural areas that suffer from lack of continuous power supplies it prefer to depend on hybrid systems like solar/wind systems, solar/geothermal system and solar/diesel-battery systems. Investigation indicates that hybrid systems could meet the required loads in different proportions depending on the operating conditions and components of the hybrid system compare with the separate system but has complexity regarding their components of the system with the high initial cost Moreover, Utilize hybrid solar/thermal system is more sufficient than had systems that mentioned as a result of the improvements at his parts to increase the overall efficiency by use PCM, nanofluid or a mix of PCM - nanofluid as cooling the PV panel to keep the efficiency of the solar cells and increase thermal energy. Thus, hybrid solar/thermal systems had proven effective to meet the required loads of electric energy and good capacity to provide thermal energy simultaneously without toxic emissions with a negligible complexity of its components.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Yadev, Rajkumar, and Mr Mayank Sharma. "Hybrid Power Generation System Using Solar -Wind Energy: A Review." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (April 30, 2018): 941–46. http://dx.doi.org/10.31142/ijtsrd11115.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Cho, Aye Ei Ei, and Su Su Myat Mon. "Design and Simulation of Electrification By Solar-Wind Hybrid System." International Journal of Trend in Scientific Research and Development Volume-3, Issue-1 (December 31, 2018): 193–99. http://dx.doi.org/10.31142/ijtsrd18946.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Li, Ting Ting, Guo Qiang Xu, and Yong Kai Quan. "A Review on Hybrid Solar Power System Technology." Applied Mechanics and Materials 281 (January 2013): 554–62. http://dx.doi.org/10.4028/www.scientific.net/amm.281.554.

Повний текст джерела
Анотація:
Solar energy utilization has met some complicated problems in recent years, like energy storage, solar thermal power generation dispatchability and grid connection etc. The concept of hybrid solar power systems proposed in early researches has extended the conditions of exploiting solar power generation technology，this paper reviews hybrid solar power system technologies in the past 40 years. According to different complementary energy resources, hybrid solar/renewable energy and solar/conventional energy systems have been discussed in this paper. Particularly, this article presents the thermal and economic performances of Integrated Solar Combined Cycle System (ISCCS).
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Kane, M. "Small hybrid solar power system." Energy 28, no. 14 (November 2003): 1427–43. http://dx.doi.org/10.1016/s0360-5442(03)00127-0.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kedia, D., K. C. Dhimole, and Masato Oki. "REMOTE VILLAGE HYBRID SOLAR LIGHTING SYSTEM WITH HYDRO ENERGY IN INDIA." JOURNAL OF THE ILLUMINATING ENGINEERING INSTITUTE OF JAPAN 83, Appendix (1999): 248. http://dx.doi.org/10.2150/jieij1980.83.appendix_248.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Prathyusha, Chappidi. "Validation of Solar PV-wind Hybrid System with Incremental Conductance Algorithm." Journal of Advanced Research in Dynamical and Control Systems 12, SP4 (March 31, 2020): 1168–79. http://dx.doi.org/10.5373/jardcs/v12sp4/20201591.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Pooniya, Vikash, Mr Pravin Kumar, and Dr Deepika Chauhan Md Asif Iqbal. "Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (April 30, 2018): 830–34. http://dx.doi.org/10.31142/ijtsrd11105.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Patil, Miss Dhanashree S. "Solar PV-Wind System Integration with Power Grid System." International Journal for Research in Applied Science and Engineering Technology 9, no. VIII (August 15, 2021): 672–80. http://dx.doi.org/10.22214/ijraset.2021.37448.

Повний текст джерела
Анотація:
This paper describes a photovoltaic (PV) and wind hybrid power system that is equipped with a Diode Clamped Multi-Level Inverter and LC filter for the generation of renewable energy. Due to their environmental friendliness and availability, wind and solar energy are ideal for hybrid systems in India. Due to fluctuations in the output voltage, equipment that require a consistent supply will be damaged by hybrid power systems that are completely dependent upon intermittent renewable energy sources. Matlab Simulink is used to create a model of the hybrid system using a Diode Clamped Multi-Level Inverter and an LC filter. Before merging a DC voltage hybrid system with the main grid of the power system, blocks such as the wind model, solar model, Diode Clamped Multi-Level Inverter, and LC filter are developed independently.... The input parameters for the project simulation include different irradiance values and varied wind speeds. Initially, a DC voltage hybrid system with the main grid of power system is constructed separately, taking into account the characteristics of the wind and photovoltaic models developed, as well as the simulation results for hybrid systems with and without Diode Clamped Multi-Level Inverters and LC filters. The input parameters for the project simulation include different irradiance values and varied wind speeds. Present are the wind and photovoltaic model characteristics, as well as simulation results for a hybrid system with and without a Diode Clamped Multi-Level Inverter and LC Filter. The results suggest that hybrid systems are more reliable in terms of generating output voltage than solo systems in this study. As well as this, the hybrid system's Diode Clamped Multi-Level Inverter and LC Filter can reduce output voltage fluctuations.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Solar hybrid system"

1

Shafi, Muhammad Irfan, and Md Maidur Rehman Talukder. "Development of Hybrid Solar System." Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-13927.

Повний текст джерела
Анотація:
Technology replaces newer technology with improved efficiency. Solar technology is going to draw out a new life to make a green change in the terms of energy. As a result energy from the sunlight is being changed into electric energy by using solar cell. But still its efficiency could not be able to make a sense as a depending energy technology. In order to look up the solution, solar technology is changing rapidly to get maximum output. To take up this new challenge solar technology is trying to change its building component that are used to make solar cell, for example solar cell material, bypass diode system, blocking diode system etc.   Now-a-days, solar energy system is designed as a hybrid system that can make electricity and hot water at the same time. In the hybrid solar system, photovoltaic and solar thermal systems are integrated at the same system and as a result heat and electricity are produced simultaneously at the same area. Solar cells are attached with both top and the bottom side of the module and the collectors are set up inside the module. By using collector inside the module, rejected heat from the solar cell is absorbed by the water that flows through the collectors. But a problem arises at the midday or after midday because the reflector of this system cannot reflect sunlight properly on the bottom side of the module. That’s why shading is occurred on the bottom side which reduce the total electrical output of this system.   To work out this shading problem, a bypass diode is connected in parallel with the group of solar cells. Schottky diodes are being used as bypass diodes inside in the most of the solar cells. Schottky diode forward voltage drop is almost 0.45 Volt which is an important cause of reducing the output power as well as the efficiency of this hybrid system. To solve this problem, new lossless diode is attached inside the hybrid solar system instead of schottky diode which can work with a very low forward voltage drop roughly 50mV at 10amp.   To make a comparison between the performance of PVT system with the schottky diode and the new lossless diode, many data has been collected from the outdoor test. After getting the output result, it is clear that the output power and efficiency is going to be changed for using the new lossless diode. For using the lossless diode, the efficiency of the bottom side of the module was increased by 0.31 %.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Gadkari, Sagar A. "A HYBRID RECONFIGURABLE SOLAR AND WIND ENERGY SYSTEM." Cleveland State University / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=csu1225821057.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Celik, Ali Naci. "The system performance and sizing of autonomous pholtovoltaic, wind and the hybrid energy systems." Thesis, Cardiff University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275214.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zhou, Zhipeng (Joe Zoe). "Performance analysis of hybrid liquid desiccant solar cooling system." Thesis, Queensland University of Technology, 2009. https://eprints.qut.edu.au/40088/1/Zhipeng_Zhou_Thesis.pdf.

Повний текст джерела
Анотація:
This thesis investigates the coefficient of performance (COP) of a hybrid liquid desiccant solar cooling system. This hybrid cooling system includes three sections: 1) conventional air-conditioning section; 2) liquid desiccant dehumidification section and 3) air mixture section. The air handling unit (AHU) with mixture variable air volume design is included in the hybrid cooling system to control humidity. In the combined system, the air is first dehumidified in the dehumidifier and then mixed with ambient air by AHU before entering the evaporator. Experiments using lithium chloride as the liquid desiccant have been carried out for the performance evaluation of the dehumidifier and regenerator. Based on the air mixture (AHU) design, the electrical coefficient of performance (ECOP), thermal coefficient of performance (TCOP) and whole system coefficient of performance (COPsys) models used in the hybrid liquid desiccant solar cooing system were developed to evaluate this system performance. These mathematical models can be used to describe the coefficient of performance trend under different ambient conditions, while also providing a convenient comparison with conventional air conditioning systems. These models provide good explanations about the relationship between the performance predictions of models and ambient air parameters. The simulation results have revealed the coefficient of performance in hybrid liquid desiccant solar cooling systems substantially depends on ambient air and dehumidifier parameters. Also, the liquid desiccant experiments prove that the latent component of the total cooling load requirements can be easily fulfilled by using the liquid desiccant dehumidifier. While cooling requirements can be met, the liquid desiccant system is however still subject to the hysteresis problems.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Sheu, Elysia J. (Elysia Ja-Zeng). "A solar reforming system for use in hybrid solar-fossil fuel power generation." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/103734.

Повний текст джерела
Анотація:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2016.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 229-241).
As demand for energy continues to rise, the concern over the increase in emissions grows, prompting much interest in using renewable energy resources such as solar energy. However, there are numerous issues with using solar energy including intermittency and the need for storage. A potential solution is the concept of hybrid solar-fossil fuel power generation. Previous work has shown that utilizing solar reforming in conventional power cycles has higher performance compared to other integration methods. In this thesis, a two level analysis of a hybrid redox redox cycle is performed. First, a system analysis of a hybrid cycle utilizing steam redox reforming is presented. Important cycle design and operation parameters such as the oxidation temperature and reformer operating pressure are identified and their effect on both the reformer and cycle performance is discussed. Simulation results show that increasing oxidation temperature can improve reformer and cycle efficiency. Also shown is that increasing the amount of reforming water leads to a higher reformer efficiency, but can be detrimental to cycle efficiency depending on how the reforming water is utilized. Next, a system analysis for a CO2 redox reforming hybrid cycle and comparison of cycle and reformer performance between a CO 2 redox reformer and steam redox reformer hybrid cycle are presented. Similar to the steam redox system, results show that increasing the oxidation temperature or the amount of reforming CO2 leads to higher reformer and cycle efficiencies. In addition, the comparison between the CO2 and steam redox reformer hybrid cycles shows that the CO2 cycle has the potential to have better overall performance.Based on the system analysis, a reformer level analysis is also performed. A novel receiver reactor concept for a solar steam redox reformer is presented, and a computational model is developed to assess its performance. The receiver-reactor consists of a dumbbell shape absorber system that has two distinct absorbers. This absorber system setup allows for the switching between reduction and oxidation steps without having to constantly change inlet streams to the reactor and is designed such that the inlet connections do not interfere with the solar window. In addition, at any point in time only one solar absorber is irradiated by the solar energy (during the reduction step). Simulation results show that the receiver-reactor strongly absorbs the solar radiation and most of the radiative heat transfer occurs in the front half of the reactor. Moreover, results show that higher conductivity absorber materials are more suitable for long term reactor operation. A sensitivity analysis is also performed for the solar steam redox reformer with respect to different performance metrics. Important parameters include channel size, inlet temperature, and reformer pressure. Moreover, a strategy for reactor design based on performance as well as integration with the power cycle is discussed.
by Elysia J. Sheu.
Ph. D.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

De, Villiers Daniel Johannes. "Hybrid energy harvesting system for a condition monitoring mote." Thesis, Cape Peninsula University of Technology, 2009. http://hdl.handle.net/20.500.11838/1067.

Повний текст джерела
Анотація:
Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2009
Traditional high voltage power transformers feature sensors measuring basic parameters from oil and gas and are limited to on-site monitoring. Unforeseen failures and breakdowns on these transformers have led to extensive financial losses even with planned maintenance schedules in place. A distinct need has arisen to actively monitor and identify causes of such failures. However, no or little infrastructure exists for effective remote condition monitoring. Wireless sensor networks can be introduced to actively monitor and identify causes of such failures. Sensor motes in the network are battery operated and therefore constrained by limited energy in these batteries. An alternative to battery-powered sensor motes is the conversion of available energy harvested from the surrounding environment into useable electrical energy powering the sensor motes. The primary objective of this research was to examine methods to harvest energy from both the environment and high voltage power transformer. A low cost and feasibly sized hybrid energy harvesting power management prototype was successfully developed that enabled sustained sensor mote operation for prolonged condition monitoring of high voltage transformers. The sensor mote utilised a piezoelectric cantilever to generate usable electrical energy from the transformer tank vibration. Together with solar energy harvesting, the system allowed for a battery-less self-sustained wireless sensor mote capable of autonomously monitoring its surroundings. The power management system's modular architecture provided for the inclusion of additional energy harvesting techniques. This allowed condition monitoring solutions not exclusively for power transformers but proposed an extensible condition monitoring solution for various applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Rodriguez, Ramon, and Pamplona David Sanchéz. "DYNAMIC MODELING OF HYBRID PV/THERMAL SOLAR SYSTEM FOR HYDROGEN PRODUCTION." Thesis, University of Gävle, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-3580.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zeinaldeen, Laith Akeelaldeen. "Estimating the performance of hybrid (monocrystalline PV - cooling) system using different factors." OpenSIUC, 2020. https://opensiuc.lib.siu.edu/dissertations/1862.

Повний текст джерела
Анотація:
AN ABSTRACT OF THE DISSERTATION OFLaith A. Zeinaldeen, for the Doctor of Philosophy degree in AGRICULTURAL SCIENCES – Renewable Energy, presented on November 2, 2020, at Southern Illinois University Carbondale.TITLE: ESTIMATING THE PERFORMANCE OF HYBRID (MONOCRYSTALLINE PV - COOLING) SYSTEM USING DIFFERENT FACTORSMAJOR PROFESSOR: Dr. Logan O. ParkAmbient temperature significantly affects photovoltaic (PV) panel performance. High temperature reduces PV panel efficiency, fill factor, and maximum power, driving up solar electrical system investment return period by increasing startup cost. Using a proper cooling system to cool down the PV panel temperature, especially during the summer season, will improve the PV panel performance, enhance its longevity, and accelerate the startup cost recovery to the solar electrical system. This dissertation presents two studies about monocrystalline PV panels. The studies used two general objectives: (i) study the best cooling period and water nozzle type to improve the monocrystalline PV panel output; and (ii) evaluating the performance of the monocrystalline PV panel using different cooling systems, other water pump discharge, and various water types during different times of day. In the first study (chapter 4), an experiment was conducted during July 2018 to determine Effect of using different cooling periods and different water nozzle types on the fill factor, efficiency, and the maximum power of monocrystalline PV panel. This experiment used two factors. The first factor was the cooling periods, which included three levels of PV panel cooling periods (5, 15, and 30 minutes). The second factor was water nozzle type: hollow cone and flat fan.In the second study (chapters 5, 6, and 7), an experiment was conducted during July and August 2018 to determine Effect of using different factors on the performance of monocrystalline PV panel at a site belong to the College of Agriculture – Southern Illinois University in Carbondale, IL. This experiment used four factors. The first factor was the time of day, the second factor was the cooling system, the third factor was the water pump discharge, and the fourth factor was the water type. The present studies' principal findings were: (i) the first experiment, the 15 minutes cooling period achieved the highest PV panel fill factor (0.795). In comparison, the 30 minutes cooling period reached the highest panel efficiency (18.6%) and maximum power (92.5 Watt). In contrast, the 5 minutes cooling period achieved the lowest PV panel fill factor (0.720), lowest panel efficiency (12.9%), and most insufficient panel maximum power (63.5 Watt). The hollow cone water nozzle achieved the highest panel fill factor (0.783), highest panel efficiency (16.60%), and the most elevated PV panel maximum power (82.8Watt). Interaction between the cooling and water nozzle types was non-significant on PV panel fill factor, significant on panel efficiency, and highly significant on PV panel maximum power. The interaction results between the cooling period and nozzle type demonstrate that the hollow cone nozzle with 30 minutes cooling period achieved the highest panel fill factor, highest panel efficiency, and the most elevated panel maximum power. The flat fan with a 5-minute cooling period achieved the lowest fill factor, lowest panel efficiency, and most insufficient panel maximum power. Tukey test results showed a highly significant difference (P < 0.0001) between the cooling period and the control treatment, and between the nozzle type treatment and the control treatment on panel fill factor, efficiency, and panel maximum power. Cooling periods have the most considerable effect on panel fill factor, panel efficiency, and maximum panel power, followed by the nozzle type. (ii) The second experiment results showed, the first cooling system (HC1) achieved the highest PV panel maximum power (77.0Watt), highest fill factor (0.745), highest PV panel efficiency (14.75%), highest average net energy (39.5Wh), highest PV panel energy (189.0 Wh) and highest average power gain (34.6Watt) comparing to the rest of the cooling systems. In comparison, the fourth (FtF2) achieved the lowest maximum power (58.0 Watt), lowest fill factor (0.653), lowest average efficiency (11.6%), lowest average net energy (-4.0Wh), lowest average energy (147.5Wh), and lowest average power gain (17.5 Watt). The fifth cooling system (SP) achieved the least average water consumption (2.0 L / hr.), while the second cooling system (HC2) achieved the highest average water consumption (39.0 L / hr.). The medium water pump discharge (M) produced the most elevated PV panel maximum power (67.6 Watt), highest fill factor (0.709), highest average PV panel efficiency (13.28%), highest average PV panel net energy (18 Wh), highest average PV panel energy (169.0Wh) and the highest average PV panel power gain (25.9Watt). High water pump discharge (H) achieved the lowest maximum power (63.8Watt), lowest average panel efficiency (12.48%), lowest average net energy (7.5Wh), lowest average panel energy (159.5Wh), and the lowest average power gain (21.8 Watt). The low water pump discharge (L) achieved the lowest panel fill factor (0.698). Lake water achieved the highest panel maximum power (66.1Watt), lowest PV panel fill factor (0.698), highest panel efficiency (12.94%), lowest net energy (12.8 Wh), highest panel energy (165.2 Wh), and lowest power gain (23.5Watt). In contrast, city water achieved the most elevated PV panel fill factor (0.708), most insufficient panel maximum power (64.8 Watt), highest average PV panel net energy (14.8 Wh), lowest efficiency (12.62%), highest average PV panel power gain (24.25 Watt) and lowest panel energy (162.1 Wh). Tukey post hoc difference testing showed highly significant differences (P < 0.0001) between the time of day, cooling system, water pump discharge, water type treatments, and their control treatment on PV panel maximum power, fill factor, panel efficiency, panel net energy, panel energy, power gain, and the system water consumption. The cooling system has the most considerable effect on PV panel maximum power, panel fill factor, panel efficiency, panel net energy, panel energy, panel power gain, and the system water consumption. In general, using the cooling system improves the PV panel performance through enhancing the PV panel efficiency, maximum panel power, panel fill factor, panel net energy, panel energy, and PV panel power gain. Keywords: Cooling system, cooling periods, water pump discharge, water type, time of day, efficiency, maximum power, fill factor, net energy, panel energy, PV panel power gain, and cooling system water consumption.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Udayakanthi, Geetha. "Design of a Wind-Solar Hybrid Power Generation System in Sri Lanka." Thesis, KTH, Kraft- och värmeteknologi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-179398.

Повний текст джерела
Анотація:
Energy is critical to the economic growth and social development of any country. Indigenous energy resources need to be developed to the optimum level to minimize dependence on imported fuels, subject to resolving economic, environmental and social constraints. This led to a boost in research and development as well as investment in renewable energy industry in search of ways to meet energy demand and to reduce dependency on fossil fuels. Wind and solar energy are becoming popular owing to abundance, availability and ease of harnessing for electrical power generation. This thesis focuses on an integrated hybrid renewable energy system consisting of wind and solar energy. Sri Lanka, a small island located south of the Indian subcontinent, has been blessed with renewable energy sources. According to the national energy policy a 10% share is targeted from NCRE (Non-Conventional Renewable Energy) sources by 2015 and 20% by 2020 out of total electricity generation in Sri Lanka. This thesis provides an insight into the energy scenario and present situation of renewable energy development in Sri Lanka. According to wind and solar potential maps of Sri Lanka which were developed by NREL in 2003, many parts of the country have potential to developed economic power generation. Through these maps locations were identified where both wind and solar potential is high. A detailed study was carried out in these locations with real time field data. The focal point of this thesis is to propose and evaluate a wind-solar hybrid power generation system for a selected location. Grid tied power generation systems make use of solar PV or wind turbines to produce electricity and supply the load by connecting to grid. In this study, HOMER (Hybrid Optimization Model for Electric Renewables) computer modeling software was used to model the power system, its physical behavior and its life cycle cost. The hybrid power system was designed for Hambantota District in Southern Sri Lanka. Through the simulation process, installation of 8 numbers of 850kW wind turbines and 1MW solar PV modules were identified as most economical to supply average of 3MW load connected to grid where the simple payback period of the system was 3.4 years.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Verma, Darpan. "Hybrid Solar Energy System with integrated Concentration Photovoltaic Cells and Thermoelectric Devices." University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1553613351859182.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Solar hybrid system"

1

Chinnappa, J. C. V. A solar-assisted absorption-compression cascaded hybrid air-conditioning system: Tests in Townsville and predicted performance in Darwin : report submitted to Department of Mines and Energy, Northern Territory Government. Townsville, Qld: Dept. of Civil and Systems Engineering, James Cook University, 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Viswanathan, B., and Ravi Subramanian. Materials and processes for solar fuel production. New York: Springer, 2014.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kok, Hans. Passive and hybrid solar low energy buildings: Construction issues. [Paris]: International Energy Agency, 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kok, Hans. Passive and hybrid solar low energy buildings: Construction issues. [Paris]: International Energy Agency, 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Kok, Hans. Passive and hybrid solar low energy buildings: Passive solar homes, case studies. Edited by Holtz Michael J, International Energy Agency. Solar Heating and Cooling Programme, and United States. Dept. of Energy. Paris: International Energy Agency, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Kok, Hans W. M. Passive and hybrid solar low energy buildings: Construction issues. [Paris]: International Energy Agency, 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Paolo, Tartarini, ed. Solar hydrogen energy systems: Science and technology for the hydrogen economy. Milan: Springer, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Eloghene Okedu, Kenneth, Ahmed Tahour, and Abdel Ghani Aissaou, eds. Wind Solar Hybrid Renewable Energy System. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.77440.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

PowerTherm: A photovoltaic-thermal hybrid commercial roofing system. [Sacramento]: California Energy Commission, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Solar Hybrid Systems. Elsevier, 2021. http://dx.doi.org/10.1016/c2018-0-04619-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Solar hybrid system"

1

Kanas, Nick. "Sun-Centered and Hybrid World Views." In Solar System Maps, 93–116. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-0896-3_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Stull, Mark A., and Ricky Tang. "Hybrid Nuclear Spacecraft for the Outer Planets." In Outer Solar System, 791–822. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73845-1_17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Vipin Das, P., Navneet K. Singh, Rakesh Maurya, Asheesh K. Singh, and Sri Niwas Singh. "Advances in Hybrid Solar System." In Energy Systems in Electrical Engineering, 231–83. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6456-1_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ghosal, Manoj Kumar. "Wind-Solar Photovoltaic Hybrid Power System." In Entrepreneurship in Renewable Energy Technologies, 252–337. London: CRC Press, 2022. http://dx.doi.org/10.4324/9781003347316-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ranaweera, Iromi, Mohan Lal Kolhe, and Bernard Gunawardana. "Hybrid Energy System for Rural Electrification in Sri Lanka: Design Study." In Solar Photovoltaic System Applications, 165–84. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14663-8_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Jani, D. B., Manish Mishra, and P. K. Sahoo. "Solar Assisted Solid Desiccant—Vapor Compression Hybrid Air-Conditioning System." In Applications of Solar Energy, 233–50. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-7206-2_12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Lakhdara, A., T. Bahi, and A. K. Moussaoui. "Control and Management Solar-Wind-Storage Hybrid System." In Artificial Intelligence and Renewables Towards an Energy Transition, 3–14. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-63846-7_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Kosamkar, Rohit, Vinay Rai, Ajit Shedge, Pranav Thakur, and P. S. Sheeba. "A Proposed Wireless Solar Piezo Hybrid Charging System." In International Conference on Intelligent Data Communication Technologies and Internet of Things (ICICI) 2018, 1370–75. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03146-6_160.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gao, Xin. "Control Strategy for Wind and Solar Hybrid Generation System." In Communications in Computer and Information Science, 391–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23998-4_54.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Gupta, R. A., Bhim Singh, and Bharat Bhushan Jain. "Solar Wind and Diesel Hybrid Energy System: A Review." In Proceedings of the International Conference on Recent Cognizance in Wireless Communication & Image Processing, 381–89. New Delhi: Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2638-3_44.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Solar hybrid system"

1

Beshears, D. L., G. J. Capps, D. D. Earl, J. K. Jordan, L. C. Maxey, J. D. Muhs, and T. M. Leonard. "Tracking Systems Evaluation for the “Hybrid Lighting System”." In ASME 2003 International Solar Energy Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/isec2003-44055.

Повний текст джерела
Анотація:
As part of the design and development effort for the “Hybrid Lighting System,” Oak Ridge National Laboratory (ORNL) scientists have evaluated two potential candidate-tracking systems for the solar collector. The first system, the WattSun Solar Tracker, built by Array Technologies, utilizes a patented, closed loop, optical sun sensor to sense the sun’s position and track it. The second tracking system, SolarTrak Controller, built by Enhancement Electronics, Inc., is a micro controller-based tracking system. The SolarTrak micro controller-based Tracker’s sun position is determined by computing the celestial bearing of the sun with respect to the earth using the local time, date, latitude, longitude and time zone rather than sensing the relative bearing of the sun with optical receptors. This system connects directly to the mechanical system hardware supplied by Array Technologies. Both the WattSun Solar Tracker and the SolarTrak Controller were mounted on the prototype “Hybrid Lighting” mechanical system (array) hardware. A simple switch allowed independent testing of each system. Upon completion of the evaluation of the two systems we found the WattSun Solar Tracker controller to be unacceptable for use with our prototype hybrid lighting system. The SolarTrak Controller has performed well to date and provides suitable tracking accuracy for use with our prototype “Hybrid Lighting System”. After a six-month evaluation period at ORNL, the first prototype “Hybrid Lighting System” was installed at Ohio University as part of an “Enhanced Practical Photosynthetic CO2 Mitigation.” This document will highlight the results of the tracker investigation and outline the remaining issues to be addressed, to provide a suitable tracking system for our “Hybrid Lighting” collector.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Panich, Michael T., Eric E. Carlson, and Michael F. Jerla. "Hybrid Solar Lighting System Cost and Performance Analysis." In ASME 2001 Solar Engineering: International Solar Energy Conference (FORUM 2001: Solar Energy — The Power to Choose). American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/sed2001-117.

Повний текст джерела
Анотація:
Abstract This paper reports on the methodology and results of a preliminary analysis of a hybrid solar lighting concept that has the potential to provide cost-effective topside daylighting to the core areas of commercial buildings of all types. The presented hybrid lighting concept also includes a “full spectrum” dish-type concentrating solar collector. This collector uses both the incident visible and infrared solar radiation to provide both daylighting and electric power. The incident solar radiation is separated using cold mirror technology. Visible light is sent to a fiber optic bundle for routing to integrated fiber optic/fluorescent luminaires within the building. Separated infrared solar radiation is focused on a photovoltaic cell and converted to electricity. The electricity produced provides self-powering of the collector solar tracking system and the excess electricity produced is sent into the grid-connected commercial building electric system. The paper presents the potential for performance increases/cost reductions in the technology and the current and future cost competitiveness of this promising solar technology.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

El-Shatter, Thanaa F., Mona N. Eskandar, and Mohsen T. El-Hagry. "Hybrid PV/Fuel Cell System Design and Simulation." In ASME 2001 Solar Engineering: International Solar Energy Conference (FORUM 2001: Solar Energy — The Power to Choose). American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/sed2001-134.

Повний текст джерела
Анотація:
Abstract In this paper, a hybrid Photovoltaic (PV)-fuel cell generation system employing an electrolyzer for hydrogen generation is designed and simulated. The system is applicable for remote areas or isolated loads. Fuzzy regression model (FRM) is applied for maximum power point tracking (MPPT) to extract maximum available solar power from PV arrays under variable insolation conditions. The system incorporates a controller designed to achieve continuous supply power to the load via the PV array or the fuel cell, or both according to the power available from the sun. The simulation results show that the system can run without power shortage for more than four days even in case of zero insolation.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tupper, Kendra, Rob Jensen, Joe Cloyd, Rob Wills, and Charles Sullivan. "Optimization of Hybrid Power System Operation." In ASME 2004 International Solar Energy Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/isec2004-65052.

Повний текст джерела
Анотація:
In developing countries, half of the world’s population lives without electric power. Hybrid power systems, consisting of photovoltaic (PV) modules, battery banks, and backup diesel generators, have the potential to become a cost-effective solution for delivering power to many of these remote villages where grid extension is cost-prohibitive. In this paper, we show that improved dispatch strategies can significantly decrease the cost of a hybrid power system. We propose using a genetic algorithm (GA) in combination with novel load and insolation predictive strategies to reduce the operating costs over the present state-of-the-art methods. Realistic simulations demonstrate that this technique provides an average cost savings of 20.9% over the Set Point Strategy and 13.8% over the Load Following Strategy. We show that this strategy is a viable means of reducing the cost of hybrid power system operation.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mago, Pedro, and D. Yogi Goswami. "A Study of the Performance of a Hybrid Liquid Desiccant Cooling System Using Lithium Chloride." In ASME 2001 Solar Engineering: International Solar Energy Conference (FORUM 2001: Solar Energy — The Power to Choose). American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/sed2001-118.

Повний текст джерела
Анотація:
Abstract A hybrid desiccant system using aqueous lithium chloride was studied by simulation, laboratory test, and field tests. This paper presents field test of a hybrid solar liquid desiccant cooling system conducted at a test house at the University of Florida’s Energy Research and Education Park. These tests consisted of operating the air conditioning system at the test house in two configurations: the conventional vapor compression system and the hybrid desiccant system. For each configuration the system was operated in two modes: recirculation, and 100% ventilation air. Experiments were conduct to study the influence of the air mass flow rate, temperature of the inlet air, temperature of the desiccant, and desiccant mass flow rate on the performance of both system configurations. Based on the field test results it was found that the hybrid desiccant system improves the air conditioning performance in the field test house by decreasing the outlet humidity and temperature of the air. It was also found that the hybrid desiccant cooling system is more cost effective for the case 100% fresh air ventilation than recirculation.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sankrithi, Mithra, and Shani Watkins. "Collaborative Prototype Development & Test Project for a Novel Hybrid Solar Concentrating Cogeneration System." In American Solar Energy Society National Solar Conference 2016. Freiburg, Germany: International Solar Energy Society, 2016. http://dx.doi.org/10.18086/solar.2016.01.20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Vorndran, Shelby, Juan M. Russo, Yuechen Wu, and Raymond K. Kostuk. "Holographic Lens Hybrid Spectrum-Splitting System: Design and Performance." In Optics for Solar Energy. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/ose.2013.rw1d.3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Miyanabe, H., and Keizo Yokoyama. "Study of a Thermal–photovoltaic Solar Hybrid System." In ISES Solar World Congress 2015. Freiburg, Germany: International Solar Energy Society, 2016. http://dx.doi.org/10.18086/swc.2015.10.04.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Chandler, Ashley, Brian Cantwell, and G. Hubbard. "Hybrid Propulsion for Solar System Exploration." In 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-6103.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Malik, Muhammad Zeeshan, Kanza Zehra, Irfan Ali, Ubedullah, Muhammad Ismail, Abid Hussain, Vishesh Kumar, Mir Abid, and Mazhar H. Baloch. "Solar-Wind Hybrid Energy Generation System." In 2020 IEEE 23rd International Multitopic Conference (INMIC). IEEE, 2020. http://dx.doi.org/10.1109/inmic50486.2020.9318083.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Solar hybrid system"

1

Lansey, Kevin, and Chris Hortsman. Preliminary Feasibility Study of a Hybrid Solar and Modular Pumped Storage Hydro System at Biosphere 2. Office of Scientific and Technical Information (OSTI), October 2016. http://dx.doi.org/10.2172/1329155.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Turchi, C. Concentrating Solar Power Hybrid System Study: Cooperative Research and Development Final Report, CRADA Number CRD-13-506. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1156968.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Nimmo, B. G., and M. D. Thornbloom. Open cycle liquid desiccant dehumidifier and hybrid solar/electric absorption refrigeration system. Annual report, January 1993--December 1993. Calendar year 1993. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/45576.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Hooks, Ronald, and Valerie Montoya. Feasibility Study for Photovoltaics, Wind, solar Hot Water and Hybrid Systems. Office of Scientific and Technical Information (OSTI), March 2008. http://dx.doi.org/10.2172/929306.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Byard D. Wood and David L. Beshears. ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS Cross-Cutting R & D on adaptive full-spectrum solar energy systems for more efficient and affordable use of solar energy in buildings and hybrid photobioreactors. Office of Scientific and Technical Information (OSTI), February 2006. http://dx.doi.org/10.2172/893092.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Byard D. Wood and Jeff D. Muhs. ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS CROSS-CUTTING R&D ON ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS FOR MORE EFFICIENT AND AFFORDABLE USE OF SOLAR ENERGY IN BUILDINGS AND HYBRID PHOTOBIOREACTORS. Office of Scientific and Technical Information (OSTI), September 2002. http://dx.doi.org/10.2172/811437.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wood, Byard, and Kwang Kim. Adaptive Full-Spectrum Solar Energy Systems Cross-Cutting R&D on adaptive full-spectrum solar energy systems for more efficient and affordable use of solar energy in buildings and hybrid photobioreactors. Office of Scientific and Technical Information (OSTI), March 2006. http://dx.doi.org/10.2172/1084638.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Byard D. Wood and Jeff D. Muhs. ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS CROSS-CUTTING R&D ON ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS FOR MORE EFFICIENT AND AFFORDABLE USE OF SOLAR ENERGY IN BUILDINGS AND HYBRID PHOTOBIOREACTORS. Office of Scientific and Technical Information (OSTI), August 2004. http://dx.doi.org/10.2172/834116.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Byard D. Wood and Jeff D. Muhs. ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS CROSS-CUTTING R&D ON ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS FOR MORE EFFICIENT AND AFFORDABLE USE OF SOLAR ENERGY IN BUILDINGS AND HYBRID PHOTOBIOREACTORS. Office of Scientific and Technical Information (OSTI), February 2005. http://dx.doi.org/10.2172/838556.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Byard D. Wood and Jeff D. Muhs. ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS CROSS-CUTTING R&D ON ADAPTIVE FULL-SPECTRUM SOLAR ENERGY SYSTEMS FOR MORE EFFICIENT AND AFFORDABLE USE OF SOLAR ENERGY IN BUILDINGS AND HYBRID PHOTOBIOREACTORS. Office of Scientific and Technical Information (OSTI), January 2003. http://dx.doi.org/10.2172/822721.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Solar hybrid system" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії