Готові списки джерел за темами / Solar cell applications

Добірка наукової літератури з теми "Solar cell applications"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Solar cell applications".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Solar cell applications"

1

MAHENDRA KUMAR, MAHENDRA KUMAR. "Cds/ Sno2 Thin Films for Solar Cell Applications." International Journal of Scientific Research 3, no. 3 (June 1, 2012): 322–23. http://dx.doi.org/10.15373/22778179/march2014/109.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Jabbar, Ali H. "Fabrication and Characterization of CuO:NiO Composite for Solar Cell Applications." Journal of Advanced Research in Dynamical and Control Systems 24, no. 4 (March 31, 2020): 179–86. http://dx.doi.org/10.5373/jardcs/v12i4/20201431.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Zhang, Qifeng, Supan Yodyingyong, Junting Xi, Daniel Myers, and Guozhong Cao. "Oxidenanowires for solar cell applications." Nanoscale 4, no. 5 (2012): 1436–45. http://dx.doi.org/10.1039/c2nr11595f.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Joachim Möller, Hans. "Semiconductors for solar cell applications." Progress in Materials Science 35, no. 3-4 (January 1991): 205–418. http://dx.doi.org/10.1016/0079-6425(91)90001-a.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Yamaguchi, Masafumi. "Multi-junction solar cells and novel structures for solar cell applications." Physica E: Low-dimensional Systems and Nanostructures 14, no. 1-2 (April 2002): 84–90. http://dx.doi.org/10.1016/s1386-9477(02)00362-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhu, Rui, Zhongwei Zhang, and Yulong Li. "Advanced materials for flexible solar cell applications." Nanotechnology Reviews 8, no. 1 (December 18, 2019): 452–58. http://dx.doi.org/10.1515/ntrev-2019-0040.

Повний текст джерела
Анотація:
Abstract The solar power is one of the most promising renewable energy resources, but the high cost and complicated preparation technology of solar cells become the bottleneck of the wide application in many fields. The most important parameter for solar cells is the conversion efficiency, while at the same time more efficient preparation technologies and flexible structures should also be taken under significant consideration [1]. Especially with the rapid development of wearable devices, people are looking forward to the applications of solar cell technology in various areas of life. In this article the flexible solar cells, which have gained increasing attention in the field of flexibility in recent years, are introduced. The latest progress in flexible solar cells materials and manufacturing technologies is overviewed. The advantages and disadvantages of different manufacturing processes are systematically discussed.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Tanabe, Katsuaki. "Nanostructured Materials for Solar Cell Applications." Nanomaterials 12, no. 1 (December 23, 2021): 26. http://dx.doi.org/10.3390/nano12010026.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Al Dosari, Haila M., and Ahmad I. Ayesh. "Nanocluster production for solar cell applications." Journal of Applied Physics 114, no. 5 (August 7, 2013): 054305. http://dx.doi.org/10.1063/1.4817421.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gourbilleau, F., C. Dufour, B. Rezgui, and G. Brémond. "Silicon nanostructures for solar cell applications." Materials Science and Engineering: B 159-160 (March 2009): 70–73. http://dx.doi.org/10.1016/j.mseb.2008.10.052.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Ramasamy, Parthiban, Palanisamy Manivasakan, and Jinkwon Kim. "Upconversion nanophosphors for solar cell applications." RSC Adv. 4, no. 66 (2014): 34873–95. http://dx.doi.org/10.1039/c4ra03919j.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Solar cell applications"

1

Jons, Mattias. "Doped 3C-SiC Towards Solar Cell Applications." Thesis, Linköpings universitet, Halvledarmaterial, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-148595.

Повний текст джерела
Анотація:
The market for renewable energy sources, and solar cells in particular is growing year by year, as a result there is a large interest in research on new materials and new technologies for solar power applications. In this thesis the photovoltaic properties of cubic silicon carbide (3C-SiC) has been investigated. The research includes material growth using the sublimation epitaxy method, both n-type and p-type SiC have been investigated. 3C-SiC pn junctions have been produced and their electrical properties have been characterized, this is the first time 3C-SiC pn junctions have been studied in the research group. Photoresponse has been demonstrated from a 3C-SiC pn junction with Al and N used as p- and ntype dopants. This is the first demonstrated solar cell performance using 3C-SiC, to our knowledge.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fyhn, Anna Maren Andersen. "Electrodeposition of Metal Oxides for Solar Cell Applications." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-16361.

Повний текст джерела
Анотація:
This thesis investigates the electrodeposition process of zinc-, copper-, silver-, and silver copperoxides at cathodic and anodic voltages. Silver copper oxide has been successfully electrodepositedon a substrate of PtSi from a pH 12 dilute solution of copper nitrate, silver nitrate and sodiumhydroxide at 0.9V vs a silver metal cathode. This film was confirmed to be polycrystalline AgCuO2by EDS and XRD studies. Zinc oxide and copper oxide were deposited on gold substrates from their respective nitrates. The zinc oxide deposition was confirmed polycrystalline in XRD and had a band gap between 3.2eV and 3.5eV measured by optical reflectance. The copper oxide appeared polycrystalline in SEM but only amorphous signal was achieved in XRD, the material had a band gap of around 2eV. Despite many attempts, clean silver oxide was not successfully deposited. These materials may all be suitable for solar cells applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Alam, Firoz. "Fabrication and characterization of surfactant free metal chalcogenides (Pbs and SnS) for photovoltaic applications." Thesis, IIT Delhi, 2016. http://localhost:8080/xmlui/handle/12345678/7043.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Espindola, Rodriguez Moises. "Kesterite Deposited by Spray Pyrolysis for Solar Cell Applications." Doctoral thesis, Universitat de Barcelona, 2015. http://hdl.handle.net/10803/346633.

Повний текст джерела
Анотація:
Solar cells generate electrical power by direct conversion of solar radiation into electricity using semiconductors. Once produced, the solar cells do not require the use of water; operate in silence and can be easily installed almost everywhere, as solar panels with low technological risk. In this thesis new photovoltaic materials and solar cells are investigated. From the beginning of the semiconductor era, silicon has been present; the semiconductor theory improved with the silicon technology, almost taking the idealized models to reality in within silicon. In the recent years plenty of new natural and artificially produced materials have seen the light; some of them are still waiting to be understood and explained by a new theory that has to be experimentally proved right. The clue for a better and faster progress is to work in a multidisciplinary frame; as this thesis shows, all research and knowledge has to have future protections and possibilities of been used in the benefit of our society. Today, the photovoltaic technology (PV) based on silicon solar cells dominates the market. The thin film PV such as GaAs, Cu(In,Ga)Se2 (GIGS) and CdTe have reached power conversion efficiencies above 20% which makes them industrially interesting despite the use of scare and/or very toxic elements. Researchers and investors are expectant for a new stable, eco-friendly, inexpensive, fast and easy to produce material that could be used in a big scale and long term for photovoltaic terrestrial applications. Some years ago it was believed that this ideal material was near to be confirmed when the reflectors were on a new chalcogenide material: Cu2ZnSn(SxSe1-x)4 (CZTSSe) called kesterite after its crystal structure. This semiconductor is very attractive due to its constituent elements, semiconductor properties. Its similarity with GIGS and compatibility with the already existing industrial processes made possible its rapid power conversion efficiency rise as absorber material in thin film solar cells. Through the years kesterite has been found to be a challenging material due to the energetically feasible mixture of stannite and kesterite structures, the high probability of defects, and the narrowness of the optimum compositional region (compared with that of chalcopyrites) that eases the formation of secondary phases limiting the efficiency of the solar cells. Recently, CZTSSe thin film solar cells with certified efficiency of 12.6% were produced by IBM; synthesized by spin-coating using a hydrazine-based pure solution approach on a soda-lime glass (SLG) Mo coated substrate. The use of hydrazine is the key for the record as well its mayor drawback however it demonstrates the robustness of the solution-based techniques. In this thesis the use of a cool-wall vertical pneumatic spray pyrolysis system (SP) is demonstrated as a synthesis technique of CZTS kesterite thin films from water and alcohol-based precursor solutions containing metal salts and thiourea. In the course of this thesis, the possibilities and limitations of this synthesis technique and the resulting films are explored in the frame of system- and solution-related parameters. The SP system used in this thesis is sophisticate and advantageous; is able of reproduce the open-air conditions used in typical spray systems but also it is capable of grow films by spraying in an oxygen-free atmospheres such as Ar or Ar-H2 or any other. It was completely new spray approach by the year of the publication of our first repot (2013) with a 0.5% efficient working solar cell. A remarkable efficiency value by the time of publication if considered the combo challenge: material + deposition technique. In this thesis, air, Ar and Ar-H2 were used as carrier gas and atmosphere, where the so sprayed films were studied in combination with other system parameters (solution flux, time of spraying, substrate temperature, etc.) and some solution related parameters (solvent, metal precursors concentration, solution stability, etc.). To obtain device grade films, the sprayed kesterite ought to be annealed; this annealing process is also subject of study in this thesis. One step annealing at high temperature (580°C) at room pressure in S-containing reactive atmosphere was optimized for the CZTS-based thin films with efficiencies of 1.4%. To synthesize CZTSSe films, different annealing approaches were tried; one step room pressure annealing (at 550°C) in Se- containing reactive atmosphere probed to be the optimum for sprayed kesterite from methanol-based precursor solutions for solar cells with the highest conversion efficiency of 1.9% obtained in this thesis. The results showed here open many new possibilities for the use of spray systems for the synthesis of PV quality materials for solar cells applications.
En esta tesis se demuestra el uso de un sistema de spray pyrolysis utilizado para sintetizar kesterita de azufre puro (CZTS) un material que representa un reto tecnológico y científico en el campo de las celdas solares de películas delgadas. La síntesis de este material es llevada a cabo en un sistema de spray en atmosfera controlada en el marco de los parámetros del sistema y de la solución; evitando el uso de reactivos altamente peligrosos utilizando en su caso agua y alcoholes. Se demuestra la síntesis de materiales del tipo CZTSSe después de un proceso de selenización; las celdas solares resultantes muestran las posibilidades del material y del sistema.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mavundla, Sipho Enos. "One-Dimensional nanostructured polymeric materials for solar cell applications." Thesis, University of the Western Cape, 2010. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_1088_1305888911.

Повний текст джерела
Анотація:

This work entails the preparation of various polyanilines with different morphologies and their application in photovoltaic solar cells. Zinc oxide (ZnO) with one-dimensional and flower-like morphology was also prepared by microwave irradiation and used as electron acceptors in photovoltaics devices. The morphological, structural, spectroscopic and electrochemical characteristics of these materials were determined by scanning electron microscopy (SEM), X-Ray diffraction (XRD), Raman, Fourier-transformed infrared spectroscopy (FTIR), ultraviolet and visible spectroscopy (UV-Vis), photoluminescence(PL), thermal gravimetric analysis (TGA) and cyclic voltammetry (CV) experiments. Devices fabricated from these materials were characterized under simulated AM 1.5 at 800 mW.

Стилі APA, Harvard, Vancouver, ISO та ін.
6

Koulentianos, Dimitrios. "Quantum confinement effect in materials for solar cell applications." Thesis, Uppsala universitet, Materialteori, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-237189.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Shang, Xiangjun. "Study of quantum dots on solar energy applications." Doctoral thesis, KTH, Teoretisk kemi och biologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-94021.

Повний текст джерела
Анотація:
This thesis studies p-i-n GaAs solar cells with self-assembled InAs quantum dots (QDs) inserted. The values of this work lie in three aspects. First, by comparing the cell performance with QDs in the i-region and the n-region, the photocurrent (PC) production from QDs by thermal activation and/or intermediate band (IB) absorption is proved to be much lower in efficiency than tunneling. Second, the efficiency of PC production from QDs, characterized by PC spectrum, is helpful to design QD-based photodetectors. Third, closely spaced InAs QD layers allow a strong inter-layer tunneling, leading to an effective PC production from QD deep states, potential for solar cell application. Fourth, from the temperature-dependent PC spectra the minority photohole thermal escape is found to be dominant on PC production from QDs in the n-region. The thermal activation energy reflects the potential variations formed by electron filling in QDs. Apart from InAs QDs, this thesis also explores the blinking correlation between two colloidal CdSe QDs. For QD distance of 1 µm or less, there is a bunched correlation at delay τ = 0, meaning that the two QDs blink synchronously. Such correlation disappears gradually as QD distance increases. The correlation is possibly caused by the stimulated emission between the two nearby QDs.
QC 20120507
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Henriksen, Lisa Grav. "Pump-probe experiments of multicrystalline silicon for solar cell applications." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19207.

Повний текст джерела
Анотація:
In order to make cost effective solar cells from mc-Si materials, the negative contributions from defects and impurities should be reduced. The analysis of the photogenerated carrier properties is therefore of great importance for characterising carrier processes and hence, for improving the material performance.In this work, pump-probe measurement of a range of silicon wafers have been performed, using anultrafast laser of 800 nm wavelength and 85 fs pulses. The optical response in the samples were analysed by measuring the reflected probe beam initial transient.The purpose of this theses was to explore the use of pump-probe experiment to study carrier dynamics in mc-Si. Measurements of single c-Si samples were used as a basis for developing good experimental skills as well as achieving knowledge about carrier dynamics in c-Si. The initial Delta R/R was studied for a range of input parameters, aiming to characterise important contributions to the measurements.The effects of passivation has been studied, indicating a significant contribution to R~R. Etchingoff the passivated layer of an oxide (SiO2) wafer, showed a radically increased in pump beam reflectivity, from 9% to 32%, and a reduced DeltaR~R from 47×10-6 to 37×10-6 was be observed. Analysis has showed that incident angle may be chose such that the pump reflection loss is at a minimum for the given passivation thickness.The final results showed a R~R is in the range of (14-41)e-6 for bare c-Si, and (47-171)e-6 for passivated c-Si wafers.Ultrafast initial recovery has been observed for mc-Si samples, and attributed to trapping of carriers. Decay times in the range of 1-6 ps are deduced and trapping densities are found as (1:3 - 4:3) × 10^18 cm-3, which is in the same order as the excitation densities.A methodology for using pump-probe measurements to analyse mc-Si samples is established, and the technique is used in characterising the observed defect states, which is of great interest for improving solar cell materials.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Ekstrøm, Kai Erik. "Growth and Characterization of Silicon Nanowires for Solar Cell Applications." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for kjemi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-18337.

Повний текст джерела
Анотація:
Si-nanowires are being introduced as an attempt to decrease the high recombination rate present in silicon based thin-film solar cells by employing radial pn-junctions instead of conventional planar pn-junctions. Previous publications have also shown an additional increase in the amount of absorbed light when covering a silicon-substrate in silicon nanowires which may result in a further increase in the total efficiency of a thin-film solar cell. Successful growth of Si-nanowires has earlier been performed by Chemical Vapour Deposition (CVD), employing gold (Au) as catalytic material. Au is a very stable catalytic material for nanowire growth but Au-residues are unwanted in solar cell applications, and the current experiment has therefore investigated aluminium (Al) as an alternative catalyst material. However, stable Al-catalysed growth has been proven to be difficult and is assumed to be mainly due to rapid oxidation of Al to Al2O3. Most of the nanowires were short, tapered and consisted of worm-like structures. Several unsuccessful in-situ NH3-based cleaning (CVD) processes were attempted. Tin (Sn) was also attempted as a protective coating for the Al-film in order to protect Al from exposure to air during sample transport, without any luck. As solar cells require both p-doped and n-doped sections in order to form pn-junctions, initial investigations were performed on the effect from the addition of dopant gases (B2H6 and PH3) on nanowire morphology. The addition of B2H6 to the gas flow seemed to have much larger effects than PH3 on the nanowire morphology compared to intrinsic nanowires. Both gases resulted in a continuous reduction in the average nanowire length with increasing dopant⁄SiH4 ratios, ultimately leading to a complete inhibition of nanowire growth. The highest usable dopant⁄SiH4 ratios before complete growth-inhibition were found to ~10^-3 for B2H6 and ~10^-1 for PH3. An undesirable tapering effect was also found when adding B2H6 to the gas-flow, resulting in radial growth of amorphous silicon on the nanowire walls already at the lowest dopant ratio (~10^-5). This may complicate the use of B2H6 as a dopant gas for p-type nanowires. Ignoring the fact that the addition of PH3 to the gas-flow reduces the nanowire growth rate PH3 may be assumed to be a good alternative for n-type doping of nanowires as no further effects on the nanowire morphology is observed. The actual implementation of dopant atoms into the nanowire structure may be determined by measuring the electrical resistivity in the nanowire, and a possible four-contact structure has been designed and partly optimized for this purpose. The contact structure has been designed in three layers where two of them are produced by photolithography while the smallest layer by electron-beam-lithography. Note that the structure has not been finalized because of time limitations. Some optimization of the four nanowire contacts remains as some final lift-off problems appeared, and is assumed to be related to either an incomplete development of the smallest features or an observed resist-bubbling because of high Titanium (Ti) deposition temperature. However, a robust three-point alignment procedure has been investigated and found useful for producing accurate contacts to single nanowires and leads to the conclusion of a promising structure.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Bendapudi, Sree Satya Kanth. "Novel Film Formation Pathways for Cu2ZnSnSe4 for Solar Cell Applications." Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/3005.

Повний текст джерела
Анотація:
Because of the anticipated high demand for Indium, ongoing growth of CIGS technology may be limited. Kesterite materials, which replace In with a Zn/Sn couple, are thought to be a solution to this issue. However, efficiencies are still below the 10% level, and these materials are proving to be complex. Even determination of the bandgap is not settled because of the occurrence of secondary phases. We use a film growth process, 2SSS, which we believe helps control the formation of secondary phases. Under the right growth conditions we find 1/1 Zn/Sn ratios and XRD signatures for Cu2ZnSnSe4 with no evidence of secondary phases. The optical absorption profile of our films is also a good match to the CIS profile even for films annealed at 500° C. We see no evidence of phase separation. The effect of intentional variation of the Zn/Sn ratio on material and device properties is also presented.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Solar cell applications"

1

Solar cell technology and applications. Boca Raton: Taylor & Francis, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Dhere, R. Investigation of CdZnTe for thin-film tandem solar cell applications: Preprint. Golden, Colo: National Renewable Energy Laboratory, 2003.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Flückiger, Roger Sylvain. Microcrystalline silicon thin films deposited by VHF plasmas for solar cell applications. Konstanz: Hartung-Gorre Verlag, 1995.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Center, NASA Glenn Research, ed. High energy density regenerative fuel cell systems for terrestrial applications. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Laser Surface Texturing, Crystallization and Scribing of Thin Films in Solar Cell Applications. [New York, N.Y.?]: [publisher not identified], 2013.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ahmed, Ejaz. Growth and characterisation of Cu(In,Ga)Se2 thin films for solar cell applications. Salford: University of Salford, 1995.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Jet Propulsion Laboratory (U.S.) and United States. National Aeronautics and Space Administration, eds. Proceedings of the Flate[i.e. Flat]-Plate Solar Array Project Workshop on Low-Cost Polysilicon for Terrestrial Photovoltaic Solar-Cell Applications (October 28-30, 1985, at Las Vegas, Nevada). [Washington, DC: National Aeronautics and Space Administration, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

D, Partain L., and Fraas Lewis M, eds. Solar cells and their applications. 2nd ed. Hoboken, N.J: Wiley, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

D, Partain L., ed. Solar cells and their applications. New York: Wiley, 1995.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Fraas, Lewis, and Larry Partain, eds. Solar Cells and their Applications. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470636886.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Solar cell applications"

1

Schumm, Benjamin, and Stefan Kaskel. "Nanoimprint Lithography for Photovoltaic Applications." In Solar Cell Nanotechnology, 185–201. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118845721.ch7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kolny-Olesiak, Joanna. "Colloidal Synthesis of CuInS2and CuInSe2Nanocrystals for Photovoltaic Applications." In Solar Cell Nanotechnology, 97–115. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118845721.ch3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Shabdan, Erkin, Blake Hanford, Baurzhan Ilyassov, Kadyrzhan Dikhanbayev, and Nurxat Nuraje. "Perovskite Solar Cell." In Multifunctional Nanocomposites for Energy and Environmental Applications, 91–111. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527342501.ch5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Taretto, Kurt. "Analytical Modeling of Thin-Film Solar Cells - Fundamentals and Applications." In Solar Cell Nanotechnology, 409–45. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118845721.ch15.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Partain, Larry. "Solar Cell Device Physics." In Solar Cells and their Applications, 67–109. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470636886.ch4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sicheng, Wang. "Chinese Solar Cell Status." In Solar Cells and their Applications, 171–206. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470636886.ch8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Bandarenka, Aliaksandr S. "Materials for Solar Cell Applications." In Energy Materials, 145–70. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003025498-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Bashir, Amna, and Muhammad Sultan. "Organometal Halide Perovskite-Based Materials and Their Applications in Solar Cell Devices." In Solar Cells, 259–81. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36354-3_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Vaenas, Naoum, Thomas Stergiopoulos, and Polycarpos Falaras. "Titania Nanotubes for Solar Cell Applications." In Electrochemically Engineered Nanoporous Materials, 289–306. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20346-1_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Schorr, Susan, Christiane Stephan, and Christian A. Kaufmann. "Chalcopyrite Thin-Film Solar-Cell Devices." In Neutron Scattering Applications and Techniques, 83–107. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-06656-1_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Solar cell applications"

1

Kochergin, Vladimir, Zhong Shi, and Kelly Dobson. "High-throughput photovoltaic cell characterization system." In Solar Energy + Applications, edited by Benjamin K. Tsai. SPIE, 2008. http://dx.doi.org/10.1117/12.794023.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Arakawa, H., C. Shiraishi, M. Tatemoto, H. Kishida, D. Usui, A. Suma, A. Takamisawa, and T. Yamaguchi. "Solar hydrogen production by tandem cell system composed of metal oxide semiconductor film photoelectrode and dye-sensitized solar cell." In Solar Energy + Applications, edited by Jinghua Guo. SPIE, 2007. http://dx.doi.org/10.1117/12.773366.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Cros, Stéphane, Stéphane Guillerez, Rémi de Bettignies, Noëlla Lemaître, Severine Bailly, and Pascal Maisse. "Relationship between encapsulation barrier performance and organic solar cell lifetime." In Solar Energy + Applications, edited by Neelkanth G. Dhere. SPIE, 2008. http://dx.doi.org/10.1117/12.794986.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Sopori, Bhushan. "PV Optics: a software package for solar cell and module design." In Solar Energy + Applications, edited by Daryl R. Myers. SPIE, 2007. http://dx.doi.org/10.1117/12.736550.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Fontcuberta i Morral, A. "Nanowires for solar cell applications." In 2012 Conference on Optoelectronic and Microelectronic Materials & Devices (COMMAD). IEEE, 2012. http://dx.doi.org/10.1109/commad.2012.6472343.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sebastian, P. J., Rocio Castañeda, Luis Ixtlilco, Rogelio Mejia, J. Pantoja, and A. Olea. "Synthesis and characterization of nanostructured semiconductors for photovoltaic and photoelectrochemical cell applications." In Solar Energy + Applications, edited by Gunnar Westin. SPIE, 2008. http://dx.doi.org/10.1117/12.796913.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wu, Pei-Hsuan, Yan-Kuin Su, Hwen-Fen Hong, and Cherng-Tsong Kuo. "MOVPE growth of quantum well GaAs/In 0.10 GaAs for solar cell applications." In Solar Energy + Applications, edited by Martha Symko-Davies. SPIE, 2007. http://dx.doi.org/10.1117/12.733593.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Walecki, Wojtek J., and Fanny Szondy. "Integrated quantum efficiency, topography, and stress metrology for solar cell manufacturing: real space approach." In Solar Energy + Applications, edited by Neelkanth G. Dhere. SPIE, 2008. http://dx.doi.org/10.1117/12.792934.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kim, Sung Jin, Won Jin Kim, Alexander N. Cartwright, and Paras N. Prasad. "Tandem inorganic/organic hybrid solar cell using a PbSe nanocrystal photoconductor for carrier multiplication." In Solar Energy + Applications, edited by Loucas Tsakalakos. SPIE, 2008. http://dx.doi.org/10.1117/12.796111.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Alici, Kamil Boratay, and Ekmel Ozbay. "Photonic metamaterial absorber designs for infrared solar cell applications." In SPIE Solar Energy + Technology, edited by Loucas Tsakalakos. SPIE, 2010. http://dx.doi.org/10.1117/12.860223.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Solar cell applications"

1

Clark, E., M. Kane, and P. Jiang. Performance of "Moth Eye" Anti-Reflective Coatings for Solar Cell Applications. Office of Scientific and Technical Information (OSTI), March 2011. http://dx.doi.org/10.2172/1009445.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Hardin, Brian, Craig Peters, and Edward Barnard. Three-dimensional minority carrier lifetime mapping of thin film semiconductors for solar cell applications. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1411710.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Garand, Etienne. Probing Chromophore Energetics and Couplings for Singlet Fission in Solar Cell Applications: Final technical report. Office of Scientific and Technical Information (OSTI), September 2018. http://dx.doi.org/10.2172/1469697.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ferguson, Andrew J. Materials and Device Architectures for Organic Solar Cell Applications: Cooperative Research and Development Final Report, CRADA Number CRD-09-355. Office of Scientific and Technical Information (OSTI), October 2018. http://dx.doi.org/10.2172/1479638.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Haggerty, J., and D. Adler. Laser-heated CVD process for depositing thin films for low-cost solar cell applications. Annual subcontract progress report, 1 February 1984-31 May 1985. Office of Scientific and Technical Information (OSTI), November 1985. http://dx.doi.org/10.2172/6451174.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Liu, Geyuan. Application of photoluminescence imaging and laser-beam-induced-current mapping in thin film solar cell characterization. Office of Scientific and Technical Information (OSTI), May 2017. http://dx.doi.org/10.2172/1417978.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Cramer, Hailey E., Mark H. Griep, and Shashi P. Karna. Synthesis, Characterization, and Application of Gold Nanoparticles in Green Nanochemistry Dye-Sensitized Solar Cells. Fort Belvoir, VA: Defense Technical Information Center, June 2012. http://dx.doi.org/10.21236/ada568748.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Sopori, Bhushan. Application of Vacancy Injection Gettering to Improve Efficiency of Solar Cells Produced by Millinet Solar: Cooperative Research and Development Final Report, CRADA Number CRD-10-417. Office of Scientific and Technical Information (OSTI), July 2012. http://dx.doi.org/10.2172/1051916.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Solar cell applications" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії