Добірка наукової літератури з теми "Solar aided power generation"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Solar aided power generation".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Solar aided power generation"

1

Hu, Eric, YongPing Yang, Akira Nishimura, Ferdi Yilmaz, and Abbas Kouzani. "Solar thermal aided power generation." Applied Energy 87, no. 9 (September 2010): 2881–85. http://dx.doi.org/10.1016/j.apenergy.2009.10.025.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Qin, Jiyun, Eric Hu, and Xiaohua Li. "Solar aided power generation: A review." Energy and Built Environment 1, no. 1 (January 2020): 11–26. http://dx.doi.org/10.1016/j.enbenv.2019.09.003.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Yu, Yu-Hang, Shao-Peng Guo, Yong Hao, Mao-Bin Hu, and Rui-Lin Wang. "Advanced concept of coupling solar-aided flue gas treatment and solar-aided power generation in power plants." Energy Conversion and Management 203 (January 2020): 112026. http://dx.doi.org/10.1016/j.enconman.2019.112026.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Qin, Jiyun, Eric Hu, Graham J. Nathan, and Lei Chen. "Concentrating or non-concentrating solar collectors for solar Aided Power Generation?" Energy Conversion and Management 152 (November 2017): 281–90. http://dx.doi.org/10.1016/j.enconman.2017.09.054.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Yan, Qin, Eric Hu, Yongping Yang, and Rongrong Zhai. "Evaluation of solar aided thermal power generation with various power plants." International Journal of Energy Research 35, no. 10 (July 26, 2010): 909–22. http://dx.doi.org/10.1002/er.1748.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Qin, Jiyun, Eric Hu, Graham J. Nathan, and Lei Chen. "Mixed mode operation for the Solar Aided Power Generation." Applied Thermal Engineering 139 (July 2018): 177–86. http://dx.doi.org/10.1016/j.applthermaleng.2018.04.118.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zhai, Rongrong, Yongping Yang, Yong Zhu, and Denggao Chen. "The Evaluation of Solar Contribution in Solar Aided Coal-Fired Power Plant." International Journal of Photoenergy 2013 (2013): 1–9. http://dx.doi.org/10.1155/2013/197913.

Повний текст джерела
Анотація:
Solar aided coal-fired power plants utilize various types of solar thermal energy for coupling coal-fired power plants by using the characteristics of various thermal needs of the plants. In this way, the costly thermal storage system and power generating system will be unnecessary while the intermittent and unsteady way of power generation will be avoided. Moreover, the large-scale utilization of solar thermal power and the energy-saving aim of power plants will be realized. The contribution evaluating system of solar thermal power needs to be explored. This paper deals with the evaluation method of solar contribution based on the second law of thermodynamics and the principle of thermoeconomics with a case of 600 MW solar aided coal-fired power plant. In this study, the feasibility of the method has been carried out. The contribution of this paper is not only to determine the proportion of solar energy in overall electric power, but also to assign the individual cost components involving solar energy. Therefore, this study will supply the theoretical reference for the future research of evaluation methods and new energy resource subsidy.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Musango, Josephine K., and Alan C. Brent. "A roadmap framework for solar aided power generation in South Africa." Journal of Energy in Southern Africa 26, no. 4 (April 13, 2017): 2. http://dx.doi.org/10.17159/2413-3051/2015/v26i4a2087.

Повний текст джерела
Анотація:
Technology roadmaps are critical for decisions pertaining to technology development. They have been utilised in the renewable energy sector to assist in filtering alternative technology options in order to support energy policy formulation, energy security and energy independence, among others. However, solar aided power generation is a recent concept and no roadmap has been developed for the technology as yet. This paper thus reviewed the literature related to roadmapping with the aim of understanding the methods and tools that have been utilised in other settings. Informed by the literature, a conceptual framework was developed, which was further utilised for the initial analysis for developing a roadmap for solar aided power generation in South Africa. Generally, it would be beneficial for South Africa to integrate solar aided power generation within its current Renewable Energy Independent Power Producer Procurement Programme (REIPPPP) or the National Treasury Public-Private Partnership (PPP) programme. However, it should be noted that this is only feasible in the short- and medium-term. In the long-term, there is a need to support stand-alone solar thermal technologies.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Musango, Josephine K., and Alan C. Brent. "A roadmap framework for solar aided power generation in South Africa." Journal of Energy in Southern Africa 26, no. 4 (April 5, 2017): 1. http://dx.doi.org/10.17159/2413-3051/2016/v26i4a2116.

Повний текст джерела
Анотація:
Technology roadmaps are critical for decisions pertaining to technology development. They have been utilised in the renewable energy sector to assist in filtering alternative technology options in order to support energy policy formulation, energy security and energy independence, among others. However, solar aided power generation is a recent concept and no roadmap has been developed for the technology as yet. This paper thus reviewed the literature related to roadmapping with the aim of understanding the methods and tools that have been utilised in other settings. Informed by the literature, a conceptual framework was developed, which was further utilised for the initial analysis for developing a roadmap for solar aided power generation in South Africa. Generally, it would be beneficial for South Africa to integrate solar aided power generation within its current Renewable Energy Independent Power Producer Procurement Programme (REIPPPP) or the National Treasury Public-Private Partnership (PPP) programme. However, it should be noted that this is only feasible in the short- and medium-term. In the long-term, there is a need to support stand-alone solar thermal technologies.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Chantasiriwan, Somchart. "Solar-aided power generation in biomass power plant using direct steam generating parabolic trough collectors." Energy Reports 8 (April 2022): 641–48. http://dx.doi.org/10.1016/j.egyr.2021.11.199.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "Solar aided power generation"

1

Sheu, Elysia J. (Elysia Ja-Zeng). "Hybrid solar-fossil fuel power generation." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/78189.

Повний текст джерела
Анотація:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 83-92).
In this thesis, a literature review of hybrid solar-fossil fuel power generation is first given with an emphasis on system integration and evaluation. Hybrid systems are defined as those which use solar energy and fuel simultaneously, thus excluding the viable alternative of solar thermal plants which use fossil fuels as backup. The review is divided into three main sections: performance metrics, the different concentrated solar receiver technologies and their operating conditions, and the different hybridization schemes. In addition, a new linear combination metric for analysis of hybrid systems, which considers trade-off of different metrics at the fleet level, is presented. This metric is also compared to alternative metrics from multi-objective optimization. Some previous work only evaluates the hybrid cycle at a certain point in time, which can be misleading as this evaluation would not take into account certain aspects of hybrid cycle such as fluctuating solar supply. Furthermore, almost all previous work designs the hybrid solar-fossil fuel systems for a certain point in time and then evaluates the performance of the system for an entire year. By not taking into account fluctuating solar supply and selling price of electricity in the design of the system, the best possible annual performance of the hybrid cycle may not be reached. Second, an analysis of solar reforming as the integration method for the hybrid cycle is presented, in particular steam reforming of methane. Two solar reforming systems are analyzed: one with a parabolic trough and the other with a solar tower. From the analysis, it is determined that parabolic troughs are not suitable for steam reforming due to the relatively low operating temperatures. The tower reformer system is integrated with a standard combined cycle, and the design and operation of the hybrid cycle is optimized for highest work output for a fixed fuel input and solar collector area (essentially optimizing for maximum cycle efficiency). A heuristic two step procedure is used for the optimization due to the limitation of the optimizer which cannot simultaneously optimize both design and operation. From the optimization, it is determined that the tower reforming integration method is a promising integration option in that this type of hybrid cycle yields high incremental solar efficiencies and also satisfies the linear combination metric for efficiency and CO₂ emissions (i.e., the analyzed hybrid cycle has a higher efficiency for a fixed CO₂ emissions compared to a linear combination of solar only and fossil fuel only cycles).
by Elysia J. Sheu.
S.M.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Trolove, Hamish P. "Line focus solar Stirling domestic power generation." Thesis, University of Canterbury. Mechanical Engineering, 1994. http://hdl.handle.net/10092/6468.

Повний текст джерела
Анотація:
This thesis has found that to generate electricity for a domestic supply, the use of a two stage line focus concentrator coupled to a Stirling engine by way of a heat pipe is very inefficient, and the end result (useful power) could be better achieved by a line focus system with a Rankine cycle heat engine, or by using photovoltaic cells. For larger systems such as that needed to supply a small community, a point focus solar Stirling engine is the most efficient system at this stage, but with the rapid improvements being made in the performance of photovoltaic cells, this may not be the case in the future.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Amatya, Reja. "Solar thermoelectrics for small scale power generation." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/70784.

Повний текст джерела
Анотація:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 243-253).
In the past two decades, there has been a surge in the research of new thermoelectric (TE) materials, driven party by the need for clean and sustainable power generation technology. Utilizing the Seebeck effect, the thermoelectric devices can be used as heat engines to convert heat into electricity. With no moving parts, the generators are considered highly reliable with low maintenance, which is essential for decentralized power source. With nearly 1.6 billion people living without basic electricity, the need for a small scale power generation is there. Through this work, we show that the solar thermoelectric generators (STEGs) using cheap parabolic concentrators with high ZT modules can be a viable and a costeffective alternative to solar photovoltaics for distributed power generation. The maximum conversion efficiency of 3% has been achieved for a STEG under AM 1.5G conditions with commodity thermoelectric module. The generator was able to produce a peak output power of 11 W, with an inexpensive parabolic solar concentrator which can be found in developing countries being used as solar cookers. The output power is the highest achieved value for concentrated solar thermoelectrics and it is comparable to photovoltaic modules that are deployed in these rural communities. Based on a heat transfer model developed during this work, various system parameters were analyzed for maximizing the performance. An optimized thermoelectric module design with a slight aspect ratio variation for the TE legs have been identified that can increase the efficiency by 28%. Another parameter for system improvement that has been considered is the use of novel TE material. Issues of earth-abundance, material scarcity and cost have been taken into consideration for new material. These are important considerations for a technology that can have a potential cost-effective large scale deployment. A robust, high temperature thermoelectric material characterization tool (Z-meter) has been developed with proper radiation suppression (20x below black body radiation) and low system parasitics (41.6% lower electrical contact parasitic that previous published results). We investigated novel metalsemiconductor superlattice structures ((HfZr)N/ScN) using the Z-meter setup. Low thermal conductivities (2.5-5 W/m.K) have been measured for temperature range of 300-650 K. The Seebeck coefficient of 132 [mu]V/K was measured at 830 K, which is comparable to the state-of-the-art SiGe at similar temperature.
by Reja Amatya.
Ph.D.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Chalk, Ryan. "Solar power generation in a mining town." Thesis, Chalk, Ryan (2017) Solar power generation in a mining town. Honours thesis, Murdoch University, 2017. https://researchrepository.murdoch.edu.au/id/eprint/38686/.

Повний текст джерела
Анотація:
Climate change is a pertinent issue facing governments and societies around the world. The industrial revolution has resulted in a steady increase in the average global temperature. The mining and energy production industries have been significant contributors to this change prompting governments to intervene by promoting low emission technology within these sectors. This thesis reviews the energy problem in Australia and the mining sector with a focus on the energy requirements and production methods utilised in Newman WA. BHP operate the largest open cut iron ore mine in the world requiring substantial amounts of energy to maintain. Renewable energy in the form of utility scale solar photovoltaics (PV) provides a solution to these problems by providing emission free energy which can be used to supplement the existing natural gas turbines in operation. This research presents a custom renewable solution for the Newman scenario considering the specific township network, local weather conditions and load profile. A summary of the required PV output is presented to supply slightly over 50% of the towns power requirements during the peak (summer) period, resulting in close to full coverage in the trough (winter) period. Power Factory is used to simulate the characteristics of the existing infrastructure and produces results of integrating PV. These results conclude that the problems requiring mitigation strategies unacceptable levels of harmonics and low power factor. Strategies are proposed to control these issues predominantly through the use of high quality, made for purpose inverters. Results show that use of inverters with harmonic filtering dramatically reduce the level of harmonic injections to an acceptable level according to Australian standards. Furthermore, the configuration of inverters to supply active and reactive power assist in mitigating low power factor problems.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Pierce, Warrick Tait. "Solar assisted power generation (SAPG) : investigation of solar preheating of feedwater." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80139.

Повний текст джерела
Анотація:
Thesis (MEng)--Stellenbosch University, 2013.
ENGLISH ABSTRACT: Solar Assisted Power Generation (SAPG) can be seen as a synergy of solar and fossil plants – combining the environmental benefits of the former and the scale, efficiency and reliability of the latter. SAPG offers great potential for cost effective utilization of solar energy on utility scale and could accelerate the adoption of solar thermal energy technologies in the short and medium term, especially in countries with a significant coal base and a good solar resource such as Australia, China, United States, India and South Africa. SAPG is the replacement of bled-off steam in a Regenerative Rankine power cycle. Power plant simulations were performed using weather data for Lephalale, South Africa (Matimba power station). With an increase in the solar field outlet temperature, an increase in overall solar to electric efficiency was observed, superior to a stand-alone Solar Thermal Power Plant(s) (STPP) at similar temperatures. The performance of four solar collector technologies was compared: flat plate, evacuated tube, Linear Fresnel (LF) and Parabolic Trough (PT). This comparison was limited to the normal incidence angles of irradiation. For this application, nonconcentrating technologies are not competitive. For non-normal incidence angles, annual simulations were limited to PT and LF at final feedwater heater temperatures. The actual aperture area of around 80 000 m2 was used (50 MW thermal based on LF). On an equal aperture area basis, PT outperforms LF significantly. For the conventional North-South arrangement, LF needs to be around 53% of the specific installation cost (in $/m2 aperture area) of PT to be cost competitive. A SAPG plant at Lephalale was compared to a stand-alone Solar Thermal Power Plant STPP in a good solar resource area, namely Upington, South Africa – Parabolic Trough solar collector fields of equal size were considered for both configurations. It was found that the annual electricity generated with a SAPG plant is more than 25% greater than a stand-alone STPP. If the cost of SAPG is taken as 72% of the cost of a stand-alone STPP, this translates into SAPG being 1.8 times more cost effective than stand-alone STPP. Furthermore, SAPG performs better in high electricity demand months (South African winter – May to August). Stand-alone STPP have been adopted in South Africa and are currently being built. This was achieved by the government creating an attractive environment for Independent Power Producers (IPP). Eskom, the national power supplier, is currently investigating solar boosting at existing Eskom sites. This report argues that on a national level, SAPG, specifically solar preheating of feedwater, is a more viable solution for South Africa, with both its significant coal base and good solar resource.
AFRIKAANSE OPSOMMING: Son ondersteunde krag generasie (SOKG) kan gesien word as sinergie van sonkrag en fossiele brandstof aanlegte – dit voeg die omgewings voordele van die eersgenoemde en die grote, effektiwiteit en betroubaarheid van die laasgenoemde by mekaar. SOKG opper groot potensiaal vir koste effektiewe gebruik van son energie op nutsmaatskappyskaal en kan die aanvaarding van sontermiese energietegnologieë in die kort en medium termyn versnel, veral in lande met beduidende kool reserwes en goeie sonkrag voorkoms soos Australië, China, Verenigde State van Amerika, Indië en Suid-Afrika. SOKG impliseer die vervanging van aftap stoom in die regeneratiewe Rankine krag kringloop. Kragstasie simulasies was gedoen met die gebruik van weer data van Lephalale, Suid-Afrika (Matimba kragstasie). Met die toename van die sonveld uitlaat temperatuur kon oorhoofse son-na-elektrisiteit effektiwiteit vasgestel word, wat hoër is as die van alleenstaande sontermiese krag stasie (STKS) by soortgelyke temperature. Die effektiwiteit van vier son kollekteerder tegnologieë was vergelyk: plat plaat, vakuum buis, lineêre Fresnel (LF) en paraboliese trog (PT). Die vergelyking was beperk tot normale inval van bestraling. Vir hierdie toepassing is nie-konsentreerende tegnologie nie mededingend nie. Vir nie-normale inval hoeke was jaarlange simulasies beperk tot PT en LF by finale voedingswater temperatuur. Die werklike opening area van omtrent 80 000 m2 was gebruik (50 MW termies gebaseer op LF). By gelyke opening area, uitpresteer PT LF beduidend. Vir die gebruiklike Noord-Suid rankskikking benodig LF omtrent 53% van die spesifieke installasie kostes (in $/m2 opening area) van PT om kostes mededingend te kan wees. ‘n SOKG aanleg by Lephalale was vergelyk met alleenstaande STKS in die goeie son voorkoms gebied van Upington, Suid-Afrika – Paraboliese trog kollekteerder velde van gelyke grote was oorweeg vir al twee konfigurasies. Dit was gevind dat die jaarlikse elektrisiteit gegenereer vanaf SOKG meer as 25% is as die van alleenstaande STKS. Indien SOKG oorweeg word met 72% van die kostes van alleenstaande STKS, dan beteken dit dat SOKG 1.8 keer meer koste effektief is as alleenstade STKS. Verder, SOKG presteer beter in die hoer elektrisiteitsnavraag maande (Suid- Afrikaanse winter – May tot Augustus). Alleenstaande STKS is gekies vir Suid-Afrika en word tans gebou. Dit is bereik deur dat die regering ‘n aantreklike omgewing geskep het vir onafhanglike krag produsente. Eskom ondersoek tans SOKG by bestaande Eskom persele. Hierdie verslag beweer dat op nasionale/Eskom vlak, SOKG, besonders son voorverhitting van voedingswater, meer haalbare oplossing is vir Suid-Afrika met sy beduidende koolreserwes en goeie son voorkoms.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Omer, Siddig Adam. "Solar thermoelectric system for small scale power generation." Thesis, Loughborough University, 1997. https://dspace.lboro.ac.uk/2134/7440.

Повний текст джерела
Анотація:
This thesis is concerned with the design and evaluation of a small scale solarthermoelectric power generation system. The system is intended for electricity generation and thermal energy supply to small scale applications in developing countries of the sunny equatorial regions. Detailed design methodologies and evaluations of both the thermoelectric device and the solar energy collector, which are parts of the combined system, are presented. In addition to experimental evaluations, three theoretical models are presented which allow the design and evaluation of both the thermoelectric module and the solar energy collector. One of the models (a unified thermoelectric device model) concerns the geometrical optimization and performance prediction of a thermoelectric module in power generation mode. The model is unified in the sense that it accounts for the effect of all the parameters that contribute to the performance of the thermoelectric module, a number of which are ignored by the available design models. The unified model is used for a comparative evaluation of five thermoelectric modules. One of these is commercially available and the others are assumed to have optimum geometry but with different design parameters (thermal and electrical contact layer properties). The model has been validated using data from an experimental investigation undertaken to evaluate the commercial thermoelectric module in power generation mode. Results showed that though the commercially available thermoelectric cooling devices can be used for electricity generation, it is appropriate to have modules optimized specifically for power generation, and to improve the contact layers of thermoelement accordingly. Attempts have also been made to produce and evaluate thermoelectric materials using a simple melt-qucnching technique which produces materials with properties similar to those of the more expensive crystalline materials.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

ZHANG, SHAN. "Analytical system for photovoltaic and concentratingsolar power generation." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-16174.

Повний текст джерела
Анотація:
Energy is the material foundation of human survival and development. Throughout human industrialization process, the fossil energy has made tremendous contributions in the progress of human civilization, economic and social development. For a long time, the development of human energy use patterns makes fossil fuels rapidly depleted and the consequences of environmental deterioration by this pattern lead to the severe challenge for mankind. Many countries start paying more attention to develop the new energy. The solar electricity production system is one of the main new energy power generations. The thesis is a guide of principle for solar power generation system. It focuses on comparisons between photovoltaic and concentrating solar power generations and analysis of their market prospects. The merits and demerits of these two systems will also be pointed out in this thesis.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Palermo, Rick. "Analysis of solar power generation on California turkey ranches." Thesis, Manhattan, Kan. : Kansas State University, 2009. http://hdl.handle.net/2097/1607.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Sheu, Elysia J. (Elysia Ja-Zeng). "A solar reforming system for use in hybrid solar-fossil fuel power generation." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/103734.

Повний текст джерела
Анотація:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2016.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 229-241).
As demand for energy continues to rise, the concern over the increase in emissions grows, prompting much interest in using renewable energy resources such as solar energy. However, there are numerous issues with using solar energy including intermittency and the need for storage. A potential solution is the concept of hybrid solar-fossil fuel power generation. Previous work has shown that utilizing solar reforming in conventional power cycles has higher performance compared to other integration methods. In this thesis, a two level analysis of a hybrid redox redox cycle is performed. First, a system analysis of a hybrid cycle utilizing steam redox reforming is presented. Important cycle design and operation parameters such as the oxidation temperature and reformer operating pressure are identified and their effect on both the reformer and cycle performance is discussed. Simulation results show that increasing oxidation temperature can improve reformer and cycle efficiency. Also shown is that increasing the amount of reforming water leads to a higher reformer efficiency, but can be detrimental to cycle efficiency depending on how the reforming water is utilized. Next, a system analysis for a CO2 redox reforming hybrid cycle and comparison of cycle and reformer performance between a CO 2 redox reformer and steam redox reformer hybrid cycle are presented. Similar to the steam redox system, results show that increasing the oxidation temperature or the amount of reforming CO2 leads to higher reformer and cycle efficiencies. In addition, the comparison between the CO2 and steam redox reformer hybrid cycles shows that the CO2 cycle has the potential to have better overall performance.Based on the system analysis, a reformer level analysis is also performed. A novel receiver reactor concept for a solar steam redox reformer is presented, and a computational model is developed to assess its performance. The receiver-reactor consists of a dumbbell shape absorber system that has two distinct absorbers. This absorber system setup allows for the switching between reduction and oxidation steps without having to constantly change inlet streams to the reactor and is designed such that the inlet connections do not interfere with the solar window. In addition, at any point in time only one solar absorber is irradiated by the solar energy (during the reduction step). Simulation results show that the receiver-reactor strongly absorbs the solar radiation and most of the radiative heat transfer occurs in the front half of the reactor. Moreover, results show that higher conductivity absorber materials are more suitable for long term reactor operation. A sensitivity analysis is also performed for the solar steam redox reformer with respect to different performance metrics. Important parameters include channel size, inlet temperature, and reformer pressure. Moreover, a strategy for reactor design based on performance as well as integration with the power cycle is discussed.
by Elysia J. Sheu.
Ph. D.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kim, Byungyu. "Solar Energy Generation Forecasting and Power Output Optimization of Utility Scale Solar Field." DigitalCommons@CalPoly, 2020. https://digitalcommons.calpoly.edu/theses/2149.

Повний текст джерела
Анотація:
The optimization of photovoltaic (PV) power generation system requires an accurate system performance model capable of validating the PV system optimization design. Currently, many commercial PV system modeling programs are available, but those programs are not able to model PV systems on a distorted ground level. Furthermore, they were not designed to optimize PV systems that are already installed. To solve these types of problems, this thesis proposes an optimization method using model simulations and a MATLAB-based PV system performance model. The optimization method is particularly designed to address partial shading issues often encountered in PV system installed on distorted ground. The MATLAB-based model was validated using the data collected from the Cal Poly Gold Tree Solar Field. It was able to predict the system performance with 96.4 to 99.6 percent accuracy. The optimization method utilizes the backtracking algorithm already installed in the system and the pitch distance to control the angle of the tracker and reduces solar panels partial shading on the adjacent row to improve system output. With pitch distances reduced in the backtracking algorithm between 2.5 meters and 3 meters, the inverter with inter-row shading can expect a 10.4 percent to 28.9 percent increase in power production. The implementation and calibration of this optimization method in the field this spring was delayed due to COVID-19. The field implementation is now expected to start this summer.
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Solar aided power generation"

1

Solar electricity generation. Oxford, U.K: Alpha Science International Ltd., 2015.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Bailey, Diane. Solar power. Mankato, MN: Creative Education, 2015.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Flournoy, Don M. Solar power satellites. New York: Springer, 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Solar power generation: Technology, new concepts & policy. Boca Raton, FL: CRC Press, 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

(Organization), IT Power, ed. Solar photovoltaic power generation using PV technology. [Manila?]: Asian Development Bank, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Eisl, Holger. Photovoltaic cells: Converting government purchasing power into solar power. Flushing, N.Y: CBNS, 1993.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Cabrerizo, Enrique Alcor. Instalaciones de energía solar fotovoltáica. [Madrid?]: Progensa, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Deambi, Suneel. Solar PV power: A global perspective. New Delhi: The Energy and Resources Institute, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Michel, Villoz, ed. Solar photovoltaic energy. Stevenage: Institution of Engineering and Technology, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Institute for Energy (European Commission) and European Commission. Joint Research Centre., eds. PV status report 2008: Research, solar solar cell production and market implementation of photovoltaics. Luxembourg: Office of Official Publications of the European Communities, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Solar aided power generation"

1

Tiwari, G. N., Arvind Tiwari, and Shyam. "Solar-Power Generation." In Energy Systems in Electrical Engineering, 599–616. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0807-8_16.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Eicke, Laima, Anselm Eicke, and Manfred Hafner. "Solar Power Generation." In The Palgrave Handbook of International Energy Economics, 157–69. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86884-0_9.

Повний текст джерела
Анотація:
AbstractSolar energy supplies increasing shares of global energy demand. As a renewable source of energy, it will play a major role in decarbonizing electricity supply. This chapter provides an overview on the solar sector from an economic perspective. It describes the technical characteristics of photovoltaic and concentrated solar power and explains how these affect the economic competitiveness of solar energy. The authors highlight trends in the solar sector and elaborate on how this intermittent source of energy can be integrated into a power system. They conclude with a discussion on how renewable energy support schemes can be designed to foster the deployment of solar power by accounting for the specific characteristics of solar power.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Awasthi, Rajeev, Shubham Jain, Ram Kumar Pal, and K. Ravi Kumar. "Solar Thermal Power Generation." In Energy Systems in Electrical Engineering, 35–77. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6456-1_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Duyar, A., and S. Peana. "Solar Ponds for Power Generation." In Solar Energy Utilization, 508–18. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3631-7_25.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Shah, Yatish T. "Advanced Solar Thermal Power Systems." In Advanced Power Generation Systems, 169–244. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003328087-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Caymax, M., G. Revel, A. Luque, G. Sala, D. Margadonna, and Sergio Pizzini. "High efficiency crystalline silicon thin-film solar cells." In Photovoltaic Power Generation, 157–98. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2933-3_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Schmitt, J. P. M., S. A. Solems, G. Winterling, G. Willeke, P. Nagels, H. H. Brongersma, A. S. Verlinde, et al. "A-Si Solar cells prepared by the glow discharge technique." In Photovoltaic Power Generation, 1–136. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2933-3_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Schock, H. W., M. Saveli, J. Bougnot, S. Duchemin, V. Chen, J. C. Yoyotte, Nicola Romeo, et al. "Thin film solar cells based on II–VI and ternary chalcopyrite semiconductor materials." In Photovoltaic Power Generation, 199–233. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2933-3_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Blazev, Anco S. "Solar Thermal Technologies." In Photovoltaics for Commercial and Utilities Power Generation, 15–26. New York: River Publishers, 2020. http://dx.doi.org/10.1201/9781003151630-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Li, Guiqiang, Xiaoli Ma, Samson Shittu, and Xudong Zhao. "Solar Thermoelectric Technologies for Power Generation." In Advanced Energy Efficiency Technologies for Solar Heating, Cooling and Power Generation, 341–71. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-17283-1_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Solar aided power generation"

1

Qin, J., Eric Hu, and Shengcao Yuan. "Concentrating or Non-Concentrating Solar Collectors for Solar Aided Power Generation?" In ISES Solar World Congress 2015. Freiburg, Germany: International Solar Energy Society, 2016. http://dx.doi.org/10.18086/swc.2015.04.18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Ghorpade, Satish, and Prerna Goswami. "Solar-Aided Coal Fired Power Generation - A review." In 2020 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS). IEEE, 2020. http://dx.doi.org/10.1109/icpects49113.2020.9337000.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Qin, J., Eric Hu, and Graham J. Nathan. "The Dynamic Performance of Different Configurations of Solar Aided Power Generation (SAPG)." In ISES Solar World Congress 2015. Freiburg, Germany: International Solar Energy Society, 2016. http://dx.doi.org/10.18086/swc.2015.04.17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Wu, Junjie, Hongjuan Hou, and Yongping Yang. "Comparison Analysis for TES System in Solar-Aided 600 MW Coal-Fired Power Generation System and Solar-Alone Power Generation System." In ASME 2016 10th International Conference on Energy Sustainability collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/es2016-59491.

Повний текст джерела
Анотація:
With the shortage of fossil fuels and its negative effects on the environment, solar energy as one type of renewable energy has attracted increasing attention both socially and politically. There are two approached to use solar energy for generating electricity, i.e., using solar energy to directly to make work or integrating solar energy into fossil-fueled plant. The solar-aided coal-fired power generation (SACPG) mechanism is proven an effective way to use solar energy efficiently. In this paper, SACPG system and solar-alone parabolic trough CSP plant are modelled respectively. A comparison discussion related to TES system between SACPG system and solar-alone CSP plant is presented. The aim is to find what role of TES system will play in these two different systems. Through analysis, the role TES system plays varies in solar-alone power generation system and SACPG system. For solar-alone power generation system, the main function for TES system lies in storing surplus solar heat. Besides, there exists an optimum loop number with highest annual SEE with a specific TES hour. However, TES system for SACPG system not only stores the surplus solar heat, but also adjusts working condition. With the help of TES system, the working condition could be set as the high-pressure extraction steam could be totally replaced by solar heat. By doing so, annual solar power generation and annual SEE could be improved compared with that without TES system.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Gao Song, Hou Hongjuan, and Yang Yongping. "Optimize on the temperature of solar collectors in solar aided coal-fired electric generation." In 2009 International Conference on Sustainable Power Generation and Supply. SUPERGEN 2009. IEEE, 2009. http://dx.doi.org/10.1109/supergen.2009.5348099.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Xiuyan Wang, Mengjiao Wang, and Xiyan Guo. "Thermal performance analysis of solar steam aided coal-fired power generation." In Environment (ICMREE). IEEE, 2011. http://dx.doi.org/10.1109/icmree.2011.5930797.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Bakos, George C., and Stylianos A. Papazis. "Solar Aided Power Generation (SAPG) System Using Parabolic Troughs: Techno-Economic Scenarios." In The 3rd International Conference on Advances in Energy Research and Applications (ICAERA'22). Avestia Publishing, 2022. http://dx.doi.org/10.11159/icaera22.102.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Li, Xin, Yongliang Zhao, Ming Liu, and Junjie Yan. "Dynamic Simulation Study on a Coal-Fired Power Plant Aided With Low-Temperature Solar Energy." In ASME 2019 Power Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/power2019-1857.

Повний текст джерела
Анотація:
Abstract The concept of coal-fired power generation aided with solar energy uses stable fossil energy to compensate the instability and intermittently of solar power and reduces the cost of concentrated solar power (CSP) by decreasing the large-scale heat storage and turbine systems of CSP. In this study, trough solar collector system (TSCS) was integrated into the low-pressure heater side of a 660 MW coal-fired power generation system. In the system in which the 6# LP heater is completely replaced by TSCS, the variation value of the steam extraction flowrate of the LP heaters and the turbine output power decrease with the reduction in loads from 100% to 60% THA, and the output power increases by approximately 1 MW under 100% THA. When TSCS completely replaces the 6# LP heater under the load of 75%, the effects of direct normal irradiance (DNI) increase and flow ratio decrease on the main operating parameters of solar-aided coal-fired power plant (SCPP) were studied. Results show that the step increase of DNI decreases the 5# steam extraction flowrate and increases the output power by nearly 3 MW. When the flow ratio decreases by 139.87 kg/s, the output power decreases by around 0.35 MW. The dynamic characteristics of SCPP under different parallel situations with the load of 75% were also studied. As the number of parallel stage increases, the decrement in 5# steam extraction flowrate and the increment in output power decrease. The response time also decreases. Our study aims to provide detailed references for the control system design and optimization of coal-fired power units aided with solar energy.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Zarza, Eduardo, Loreto Valenzuela, Javier León, H. Dieter Weyers, Martin Eickhoff, Markus Eck, and Klaus Hennecke. "The DISS Project: Direct Steam Generation in Parabolic Troughs — Operation and Maintenance Experience — Update on Project Status." In ASME 2001 Solar Engineering: International Solar Energy Conference (FORUM 2001: Solar Energy — The Power to Choose). American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/sed2001-154.

Повний текст джерела
Анотація:
Abstract The DISS (DIrect Solar Steam) project is a complete R+TD program aimed at developing a new generation of solar thermal power plants with direct steam generation (DSG) in the absorber tubes of parabolic trough collectors. During the first phase of the project (1996–1998), a life-size test facility was implemented at the Plataforma Solar de Almería (PSA) to investigate under real solar conditions the basic DSG processes and evaluate the open technical questions concerning this new technology. This paper updates DISS project status and explains O&M-related experience (e.g. main problems faced and solutions applied) with the PSA DISS test facility since January 1999.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Chen, Daniel T., Glenn Reynolds, Allison Gray, Ben Ihas, Gary Curtis, Attila Molnar, Dean Hackbarth, and Robert Vezzuto. "Next Generation Parabolic Trough Solar Collectors for CSP." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91511.

Повний текст джерела
Анотація:
In order for Concentrating Solar Power (CSP) to become a significant contributor to utility scale baseload power, dramatic reductions in cost and increases in performance must be achieved. 3M Company and Gossamer Space Frames have developed advanced collectors that are centered on a step-change in solar technology aimed at transforming the economics and industrialization of CSP. In particular, we focus on mirror film based reflective materials, stiff and shape accurate panel constructions, and lightweight and accurate space frames. These technology elements have been combined into a new parabolic collector design with an aperture of 7.3 m and length of 12 m. The geometric concentration ratio of the design is 103, far exceeding current designs. The National Renewable Energy Laboratory (NREL) has measured an intercept factor exceeding 99% on the subject collector fielded at SEGS II (Daggett, CA). The successful implementation of this technology platform has implications for new solar collector designs for both point and line focus systems.
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Solar aided power generation"

1

Robert L. Johnson Jr. and Gary E. Carver. Solar Power Generation Development. Office of Scientific and Technical Information (OSTI), October 2011. http://dx.doi.org/10.2172/1047740.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Neti, Sudhakar, Alparslan Oztekin, John Chen, Kemal Tuzla, and Wojciech Misiolek. Novel Thermal Storage Technologies for Concentrating Solar Power Generation. Office of Scientific and Technical Information (OSTI), June 2013. http://dx.doi.org/10.2172/1159108.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Reddy, Ramana G. Novel Molten Salts Thermal Energy Storage for Concentrating Solar Power Generation. Office of Scientific and Technical Information (OSTI), October 2013. http://dx.doi.org/10.2172/1111584.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Wong, Bunsen. Sulfur Based Thermochemical Heat Storage for Baseload Concentrated Solar Power Generation. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1165341.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Hosemann, Peter, Mark Asta, Jan Schroers, and Y. Sungtaek Ju. HIGH-OPERATING TEMPERATURE HEAT TRANSFER FLUIDS FOR SOLAR THERMAL POWER GENERATION. Office of Scientific and Technical Information (OSTI), March 2020. http://dx.doi.org/10.2172/1670850.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Santa Lucia, C. Evaluation of Ceramic Heat Exchanger for Next-Generation Concentrated Solar Power. Office of Scientific and Technical Information (OSTI), December 2020. http://dx.doi.org/10.2172/1734612.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Schwer, R. K., and M. Riddel. Potential Economic Impact of Constructing and Operating Solar Power Generation Facilities in Nevada. Office of Scientific and Technical Information (OSTI), February 2004. http://dx.doi.org/10.2172/15007008.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Bennett, C. Development of a Solar Heat and Power Co-Generation System, CRADA No. TC02152.0. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1330579.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Schwer, R. K., and M. Riddel. The potential economic impact of constructing and operating solar power generation facilities in Nevada. Office of Scientific and Technical Information (OSTI), February 2004. http://dx.doi.org/10.2172/1216077.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

McTigue, Joshua Dominic P., Guangdong Zhu, Craig S. Turchi, Greg Mungas, Nick Kramer, John King, and Jose Castro. Hybridizing a Geothermal Plant with Solar and Thermal Energy Storage to Enhance Power Generation. Office of Scientific and Technical Information (OSTI), June 2018. http://dx.doi.org/10.2172/1452695.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії