Добірка наукової літератури з теми "Shale Mechanical properties Testing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Shale Mechanical properties Testing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Shale Mechanical properties Testing"
Kalu, Ifeanyi Emmanuel, Ericmoore Jossou, Emmanuel Kwesi Arthur, Simon Ja'afaru, and Edith Yohanna Ishidi. "Characterization and Mechanical Property Measurements by Instrumented Indentation Testing of Niger Delta Oil Shale Cuttings." International Journal of Engineering Research in Africa 59 (March 15, 2022): 89–100. http://dx.doi.org/10.4028/p-2m9z7g.
Повний текст джерелаRouainia, Mohamed, Majid Goodarzi, Tom Charlton, Andrew Aplin, and Pablo Cubillas. "Assessment of the elastic response of shale using multiscale mechanical testing and homogenisation." E3S Web of Conferences 205 (2020): 04013. http://dx.doi.org/10.1051/e3sconf/202020504013.
Повний текст джерелаWu, Zhonghu, Yujun Zuo, Shanyong Wang, Jibin Sunwen, and Leilei Liu. "Experimental Study on the Stress Sensitivity and Influence Factors of Shale under Varying Stress." Shock and Vibration 2018 (July 11, 2018): 1–9. http://dx.doi.org/10.1155/2018/3616942.
Повний текст джерелаYang, Guoliang, Jingjiu Bi, Xuguang Li, Jie Liu, and Yanjie Feng. "SHPB Testing and Analysis of Bedded Shale under Active Confining Pressure." Journal of Engineering 2020 (May 12, 2020): 1–8. http://dx.doi.org/10.1155/2020/5034902.
Повний текст джерелаAlqam, Mohammad H., Hazim H. Abass, and Abdullah M. Shebatalhmad. "New insight on studying the effect of both chemical sensitivity and rock mechanical properties in shale formation to minimize wellbore instability problems." E3S Web of Conferences 205 (2020): 03012. http://dx.doi.org/10.1051/e3sconf/202020503012.
Повний текст джерелаMinaeian, Vida, Vamegh Rasouli, and David Dewhurst. "A laboratory procedure proposed for mechanical testing of shales." APPEA Journal 54, no. 1 (2014): 337. http://dx.doi.org/10.1071/aj13034.
Повний текст джерелаGuo, Yintong, Chunhe Yang, Lei Wang, and Feng Xu. "Effects of Cyclic Loading on the Mechanical Properties of Mature Bedding Shale." Advances in Civil Engineering 2018 (2018): 1–9. http://dx.doi.org/10.1155/2018/8985973.
Повний текст джерелаMeng, Lu Bo, Tian Bin Li, Liang Wen Jiang, and Hong Min Ma. "Experimental Study on the Influence of Temperature on Shale Mechanical Properties under Conventional Triaxial Compression." Advanced Materials Research 250-253 (May 2011): 1452–55. http://dx.doi.org/10.4028/www.scientific.net/amr.250-253.1452.
Повний текст джерелаLiu, Qing-You, Lei Tao, Hai-Yan Zhu, Zheng-Dong Lei, Shu Jiang, and John David McLennan. "Macroscale Mechanical and Microscale Structural Changes in Chinese Wufeng Shale With Supercritical Carbon Dioxide Fracturing." SPE Journal 23, no. 03 (December 14, 2017): 691–703. http://dx.doi.org/10.2118/181369-pa.
Повний текст джерелаNichols Jr., Thomas C., Donley S. Collins, and Richard R. Davidson. "In situ and laboratory geotechnical tests of the Pierre Shale near Hayes, South Dakota—A characterization of engineering behavior." Canadian Geotechnical Journal 23, no. 2 (May 1, 1986): 181–94. http://dx.doi.org/10.1139/t86-028.
Повний текст джерелаДисертації з теми "Shale Mechanical properties Testing"
Audette, Scott. "Mechanical Properties of Aerospace Composite Parts Made from Stitched Multilayer 3D Carbon Fibre Preforms." Thesis, Université d'Ottawa / University of Ottawa, 2014. http://hdl.handle.net/10393/31691.
Повний текст джерелаHatami, Mohammad. "Multiscale Analysis of Mechanical and Transport Properties in Shale Gas Reservoirs." Ohio University / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1614950615095796.
Повний текст джерелаBobko, Christopher Philip 1981. "Assessing the mechanical microstructure of shale by nanoindentation : the link between mineral composition and mechanical properties." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/47731.
Повний текст джерелаIncludes bibliographical references (leaves 335-351).
Shale is a multi-phase, multi-scale sedimentary rock that makes up 75% of the earth's sedimentary basins and is especially critical in petroleum engineering applications. At macroscopic scales, shales possess a diverse set of possible compositions, resulting in a diverse set of mechanical properties. This thesis assesses microstructure and material invariant properties of shale as the link between engineering performance and composition. A comprehensive experimental microporomechanics approach, employing advanced experimental and analytical nanoindentation techniques, provides the basis for assessment of microstructure and material invariant properties. Nanoindentation experiments and analysis tools are designed to probe and infer the elastic and strength properties of the porous clay composite in shale. The results of this investigation show that properties of the porous clay composite scale with the clay packing density in the material, but otherwise do not depend on mineral composition. These scaling relationships are representative of a granular composite of spherical particles, and lead to identification of intrinsically anisotropic material invariant elastic properties and intrinsically isotropic material invariant hardness properties. The material invariant hardness represents a combination of cohesive and frictional behavior that is seen to scale with the average clay packing density in the sample. Nanoindentation results also provide evidence of packing density distributions that are analogous to pore size distributions.
(cont.) These observations are combined to define a model of the elementary building block of shale. Exploring the physical origin of this building block suggests that it represents an agglomerated polycrystal group of individual clay minerals. Particles in the porous clay composite exhibit fractal packings, which suggest a quantitative link between contemporary theories about the origin of friction and the experimental scaling of friction in shale. The new understanding provided by this thesis represents a leap forward for predictive models of shale behavior. The model of the elementary building block can be used as a basis for micromechanical homogenization models which predict poroelastic properties and strength behavior of shale at the lab-bench scale based on only two volume fraction parameters. The success of these models validates the elementary building block model and illustrates its engineering significance.
by Christoper P. Bobko.
Ph.D.
Allen, Katherine Ruth. "Methods of testing the mechanical properties of orthodontic wires /." Title page, table of contents and summary only, 1994. http://web4.library.adelaide.edu.au/theses/09DM/09dma427.pdf.
Повний текст джерелаLi, Hui. "Effects of Water Content, Mineralogy, and Anisotropy on the Mechanical Properties of Shale Gas Rocks." Thesis, University of Louisiana at Lafayette, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10235426.
Повний текст джерелаIn shale gas development, the mechanical properties of shale are crucial in hydraulic fracture propagation, wellbore stability, and the productivity of a shale gas wells. In this dissertation, acoustic velocity tests, uniaxial compressive tests, and Brazilian tensile tests were conducted on Eagle Ford and Mancos shale to investigate gas shale mechanical properties, including dynamic mechanial properties and static mechanical properties (compressive and tensile mechanical properties). Water content, mineralogy, and anisotropic effects on shale mechanical properties were analyzed.
Ultrasonic velocity measurements were performed on Eagle Ford shale samples. Dynaimic elastic properties were determined according to the compressive- and shear-wave vleocities. The results showed that both P- and S-wave velocities increase as confining pressure increases. Horizontal elastic modulus, vertical elastic modulus, and shear modulus increase with increasing confining pressure. While horizontal and vertical Poisson’s ratio exhibited more or less invariant with confining pressure. Transverse isotropy is an appropriate model to characterize Eagle Ford gas shale. Elastic properties of Eagle Ford shale are direction-dependent. Horizontal Young’s modulus is higher than vertical Young’s modulus and horizontal Poisson’s ratio is higher than vertical Poisson’s ratio. Increasing water content reduce Young’s modulus and shear modulus significantly. Induced water can make the shale softer. Water increase Eagle Ford shale’s anisotropies. Both P- and S- wave velocities decrease with increasing of TOC and clay content. Dynamic Young’s modulus, shear modulus, and bulk modulus vary inversely with TOC and clay. Poisson’s ratio does not correlate with TOC or clay content for these test samples.
Static mechanical properties were investigated by conducting uniaxial compressive tests and Brazilian tensile tests on Eagle Ford and Mancos shale samples. A new method was developed to analyze tensile elastic behavior of materials. The imbibed water significantly reduces the uniaxial compressive strength. Young’s modulus of wet samples is lower for corresponding dry samples. The maximum Young’s modulus decrease is up to about 70%. The imbibed water makes the shale softer. Poisson’s ratio increase with water content. Bedding plane/laminations have a significant impact on Eagle Ford indirect tensile strength, but not on Mancos shale. The imbibed water significantly reduces tensile strength and tensile Young’s modulus, but increase tensile Poisson’s ratio. Low clay content in the Eagle Ford shale (around 6%) and high clay content in the Mancos (around 22%) might be the explanation for the overall lower tensile strength of the Mancos than Eagle Ford shale.
Static and dynamic elastic properties of Eagle Ford shale samples are compared. Static Young’s modululs is lower than dynamic Young’s modulus. There is no strong correlations between static and dynamic Poisson’s ratio observed for the tested samples. The relationship of compressive and tensile mechanical properties of Eagle Ford shale are investigated. Tensile Young’s modululs is 0.76 to 0.98 times lower than corresponding compressive Young’s modulus. There is either no strong correlations between tensile and compressive Poisson’s ratio observed for the tested samples.
Water weaken mechanism was analyzed. Three potentially major weakening mechanisms—chemical effects, water clay interaction, and capillary pressure increase—were discussed in detail.
Kalaugher, Elizabeth Mary. "The mechanical properties of CVD diamond coated fibres." Thesis, University of Bristol, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264062.
Повний текст джерелаZulu, Andrew Wisdom. "Thick Composite Properties and Testing Methods." Thesis, KTH, Lättkonstruktioner, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-243885.
Повний текст джерелаFrei, Katherine Rebecca. "Morphology Tuning and Mechanical Properties of Nanoporous Gold." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/91899.
Повний текст джерелаMS
Al-Hajri, Hamood Said Ali. "Investigation of the controls of fluid flow through shale and their relation to its mechanical properties." Thesis, University of Leeds, 2018. http://etheses.whiterose.ac.uk/21976/.
Повний текст джерелаSaka, Kolawole. "Dynamic mechanical properties of fibre reinforced plastics." Thesis, University of Oxford, 1987. http://ora.ox.ac.uk/objects/uuid:0514854d-36db-4cc1-b377-03a75550ab76.
Повний текст джерелаКниги з теми "Shale Mechanical properties Testing"
Hill, Loren W. Mechanical properties of coatings. Philadelphia, PA (1315 Walnut St., Philadelphia 19107): Federation of Societies for Coatings Technology, 1987.
Знайти повний текст джерелаSwallowe, G. M., ed. Mechanical Properties and Testing of Polymers. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-015-9231-4.
Повний текст джерела1931-, Rossiter Bryant W., and Baetzold Roger C, eds. Determination of elastic and mechanical properties. New York: Wiley, 1991.
Знайти повний текст джерелаM, Steen, and Lohr R. D, eds. Ultra high temperature mechanical testing. Cambridge: Woodhead, 1995.
Знайти повний текст джерелаYang, Zhaohui, and Hannele K. Zubeck. Mechanical properties of frozen soils. Edited by ASTM International Committee D18 on Soil and Rock and ASTM International Committee D18 on Soil and Rock. Subcommittee D18.19 on Frozen Soils and Rock. West Conshohocken, PA: ASTM International, 2013.
Знайти повний текст джерелаMenard, Kevin P. Dynamic Mechanical Analysis. London: Taylor and Francis, 2008.
Знайти повний текст джерелаEuropean Mechanics Colloquium 269, "Experimental Identification of the Mechanical Characteristics of Composite Materials and Structures" (1990 Saint-Etienne, Loire, France). Mechanical identification of composites. London: Elsevier Applied Science, 1991.
Знайти повний текст джерелаS, Turner, ed. Mechanical evaluation strategies for plastics. Boca Raton, [Fla.]: CRC Press, 2001.
Знайти повний текст джерелаDavid, Moore. Mechanical evaluation strategies for plastics materials. Boca Raton: CRC, 2001.
Знайти повний текст джерелаM, Swallowe G., ed. Mechanical properties and testing of polymers: An A-Z reference. Dordrecht: Kluwer Academic, 1999.
Знайти повний текст джерелаЧастини книг з теми "Shale Mechanical properties Testing"
Carrier, Benoit, Matthieu Vandamme, Roland Pellenq, and Henri Van Damme. "Measurement of Mechanical Properties of Thin Clay Films and Comparison with Molecular Simulations." In Advances in Laboratory Testing and Modelling of Soils and Shales (ATMSS), 78–84. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52773-4_8.
Повний текст джерелаMorgan, Lynette. "Greenhouse produce quality and assessment." In Hydroponics and protected cultivation: a practical guide, 246–67. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781789244830.0013.
Повний текст джерелаMorgan, Lynette. "Greenhouse produce quality and assessment." In Hydroponics and protected cultivation: a practical guide, 246–67. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781789244830.0246.
Повний текст джерелаHylton, Donald C. "Mechanical Properties." In Understanding Plastics Testing, 17–35. München: Carl Hanser Verlag GmbH & Co. KG, 2004. http://dx.doi.org/10.3139/9783446412859.003.
Повний текст джерелаNaranjo, Alberto, María del Pilar Noriega E., Tim A. Osswald, Alejandro Roldán-Alzate, and Juan Diego Sierra. "Mechanical Properties." In Plastics Testing and Characterization, 185–261. München: Carl Hanser Verlag GmbH & Co. KG, 2008. http://dx.doi.org/10.3139/9783446418530.006.
Повний текст джерелаGrellmann, Wolfgang, and Sabine Seidler. "Mechanical Properties of Polymers." In Polymer Testing, 71–227. 3rd ed. München: Carl Hanser Verlag GmbH & Co. KG, 2022. http://dx.doi.org/10.3139/9781569908075.004.
Повний текст джерелаWiederhorn, Sheldon M., Richard J. Fields, Samuel Low, Gun-Woong Bahng, Alois Wehrstedt, Junhee Hahn, Yo Tomota, et al. "Mechanical Properties." In Springer Handbook of Metrology and Testing, 339–452. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-16641-9_7.
Повний текст джерелаAskeland, Donald R. "Mechanical Testing and Properties." In The Science and Engineering of Materials, 49–66. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0443-2_6.
Повний текст джерелаAskeland, Donald R. "Mechanical Testing and Properties." In The Science and Engineering of Materials, 140–87. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-2895-5_6.
Повний текст джерелаAskeland, Donald R. "Mechanical Testing and Properties." In The Science and Engineering of Materials, 63–80. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-009-1842-9_6.
Повний текст джерелаТези доповідей конференцій з теми "Shale Mechanical properties Testing"
David Domingos Soares da Silva, Ewerton Freitas de Medeiros, Lipson Douglas de Oliveira Silva, Melquisedeque Shaloon Bento da Silva Gomes, Alysson Domingos Silvestre, and Alberdan Santiago de Aquino. "TESTING DEVICE FOR CHARACTERIZATION OF THE THERMOMECHANICAL PROPERTIES OF A SHAPE MEMORY ALLOY ACTUATOR." In 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil: ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-0229.
Повний текст джерелаYarborough, Christina N., Emily M. Childress, and Richard K. Kunz. "Shape Recovery and Mechanical Properties of Shape Memory Composites." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66477.
Повний текст джерелаBuranaj Hoxha, Bez, Justin Porter, and Eli Everhard. "Pressure Transmission Testing Confirms Performance of Aluminum Complex Fluids as Dynamic Borehole Stabilizer." In International Petroleum Technology Conference. IPTC, 2022. http://dx.doi.org/10.2523/iptc-22558-ms.
Повний текст джерелаPasic, Borivoje, Nediljka Gaurina-Medjimurec, and Bojan Moslavac. "Application of Artificial Clay Samples (Pellets) in Laboratory Testing of Shale/Drilling Fluid Interaction." In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-10211.
Повний текст джерелаMusa, Ikhwanul Hafizi, Chee Phuat Tan, Junghun Leem, Iftikhar Altaf, Zahidah Md Zain, and Matthew Adams. "Anisotropic Geomechanical Rock Properties Modelling for Unconventional Shale Gas Formation." In International Petroleum Technology Conference. IPTC, 2021. http://dx.doi.org/10.2523/iptc-21281-ms.
Повний текст джерелаEsmaeeli, Roja, Ashkan Nazari, Haniph Aliniagerdroudbari, Seyed Reza Hashemi, Muapper Alhadri, Waleed Zakri, and Siamak Farhad. "Heat Built Up During Dynamic Mechanical Analysis (DMA) Testing of Rubber Specimens." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-88627.
Повний текст джерелаAsmatulu, R., S. Gokathoti, H. Liao, and C. Yip. "Temperature and Humidity Effects on the Mechanical Properties of Polymeric Nanocomposites." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12337.
Повний текст джерелаPineda-Castillo, Sergio A., Jishan Luo, Bradley N. Bohnstedt, Chung-Hao Lee, and Yingtao Liu. "Shape Memory Polymer Foam With Tunable Properties for Treatment of Intracranial Aneurysm." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24291.
Повний текст джерелаSeibi, Abdennour, Majdi Chaari, Ahmed Temani, Mehdi Mokhtari, and Charles Taylor. "Design of a New Testing Fixture for Tangential Stress Measurements in Pipes." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72490.
Повний текст джерелаYang, Chen, Manish Boorugu, Andrew Dopp, and Howon Lee. "Lightweight Microlattice With Tunable Mechanical Properties Using 3D Printed Shape Memory Polymer." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6562.
Повний текст джерелаЗвіти організацій з теми "Shale Mechanical properties Testing"
McEachen, G. W. Carbon syntactic foam mechanical properties testing. Office of Scientific and Technical Information (OSTI), January 1998. http://dx.doi.org/10.2172/654103.
Повний текст джерелаHeard, H. C., and W. Lin. High-pressure mechanical and sonic properties of a Devonian shale from West Virginia. Office of Scientific and Technical Information (OSTI), January 1986. http://dx.doi.org/10.2172/6264787.
Повний текст джерелаSlotwinski, John, April Cooke, and Shawn Moylan. Mechanical properties testing for metal parts made via additive manufacturing :. Gaithersburg, MD: National Institute of Standards and Technology, 2012. http://dx.doi.org/10.6028/nist.ir.7847.
Повний текст джерелаBlair, S. C., J. J. Sweeney, W. R. Ralph, and D. G. Ruddle. Mechanical properties of heavy oil-sand and shale as a function of pressure and temperature. Office of Scientific and Technical Information (OSTI), July 1987. http://dx.doi.org/10.2172/6452210.
Повний текст джерелаLucon, Enrico, Jake Benzing, and Nik Hrabe. Small punch testing to estimate mechanical properties of additively manufactured Ti-6Al-4V. Gaithersburg, MD: National Institute of Standards and Technology, June 2020. http://dx.doi.org/10.6028/nist.tn.2096.
Повний текст джерелаPhan, Long T., and Richard D. Peacock. Experimental plan for testing the mechanical properties of high-strength concrete at elevated temperatures. Gaithersburg, MD: National Institute of Standards and Technology, 1999. http://dx.doi.org/10.6028/nist.ir.6210.
Повний текст джерелаGeorge, James T., Steven R. Sobolik, Moo Y. Lee, Byoung Park, and Laurence Costin. Pressurized Slot Testing to Determine Thermo-Mechanical Properties of Lithophysal Tuff at Yucca Mountain Nevada. Office of Scientific and Technical Information (OSTI), May 2018. http://dx.doi.org/10.2172/1436917.
Повний текст джерелаMahendran, Subramanian, and Rajamani Jeyapaul. Preparation of Aluminium Calcium Oxide Composite Material Using Stir Casting Method and Testing of Its Mechanical Properties. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, October 2018. http://dx.doi.org/10.7546/crabs.2018.10.13.
Повний текст джерелаWang, Yanli, Peijun Hou, Ryann Bass, Xuan Zhang, and T. Sham. Interim mechanical properties data from FY22 ORNL testing of A709 with precipitation treatment for ASME Code Case data package. Office of Scientific and Technical Information (OSTI), September 2022. http://dx.doi.org/10.2172/1887676.
Повний текст джерелаWang, Jy-An John, Hao Jiang, and Hong Wang. Using Finite Model Analysis and Out of Hot Cell Surrogate Rod Testing to Analyze High Burnup Used Nuclear Fuel Mechanical Properties. Office of Scientific and Technical Information (OSTI), July 2014. http://dx.doi.org/10.2172/1148865.
Повний текст джерела