Добірка наукової літератури з теми "Sensors and actuators placement"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Sensors and actuators placement".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Sensors and actuators placement":
CHEN, KEVIN K., and CLARENCE W. ROWLEY. "H2 optimal actuator and sensor placement in the linearised complex Ginzburg–Landau system." Journal of Fluid Mechanics 681 (June 20, 2011): 241–60. http://dx.doi.org/10.1017/jfm.2011.195.
Šolek, Peter, and Marek Maták. "An Active Control of the Thin-Walled Mechanical Systems." Applied Mechanics and Materials 611 (August 2014): 22–31. http://dx.doi.org/10.4028/www.scientific.net/amm.611.22.
Mersch, Johannes, Najmeh Keshtkar, Henriette Grellmann, Carlos Alberto Gomez Cuaran, Mathis Bruns, Andreas Nocke, Chokri Cherif, Klaus Röbenack, and Gerald Gerlach. "Integrated Temperature and Position Sensors in a Shape-Memory Driven Soft Actuator for Closed-Loop Control." Materials 15, no. 2 (January 10, 2022): 520. http://dx.doi.org/10.3390/ma15020520.
Seyed Sakha, Masoud, and Hamid Reza Shaker. "Optimal sensors and actuators placement for large-scale unstable systems via restricted genetic algorithm." Engineering Computations 34, no. 8 (November 6, 2017): 2582–97. http://dx.doi.org/10.1108/ec-04-2016-0138.
Johnson, Marty E., Luiz P. Nascimento, Mary Kasarda, and Chris R. Fuller. "The Effect of Actuator and Sensor Placement on the Active Control of Rotor Unbalance." Journal of Vibration and Acoustics 125, no. 3 (June 18, 2003): 365–73. http://dx.doi.org/10.1115/1.1569946.
Soman, Rohan, Kaleeswaran Balasubramaniam, Ali Golestani, Michał Karpiński, Pawel Malinowski, and Wieslaw Ostachowicz. "Actuator placement optimization for guided waves based structural health monitoring using fibre Bragg grating sensors." Smart Materials and Structures 30, no. 12 (November 1, 2021): 125011. http://dx.doi.org/10.1088/1361-665x/ac31c4.
Heck, L. P., J. A. Olkin, and K. Naghshineh. "Transducer Placement for Broadband Active Vibration Control Using a Novel Multidimensional QR Factorization." Journal of Vibration and Acoustics 120, no. 3 (July 1, 1998): 663–70. http://dx.doi.org/10.1115/1.2893881.
GAWRONSKI, W. "SIMULTANEOUS PLACEMENT OF ACTUATORS AND SENSORS." Journal of Sound and Vibration 228, no. 4 (December 1999): 915–22. http://dx.doi.org/10.1006/jsvi.1999.2466.
Nandy, Animesh, Debabrata Chakraborty, and Mahesh S. Shah. "Optimal Sensors/Actuators Placement in Smart Structure Using Island Model Parallel Genetic Algorithm." International Journal of Computational Methods 16, no. 06 (May 27, 2019): 1840018. http://dx.doi.org/10.1142/s0219876218400182.
Huang, Xiu Feng, Ming Hong, and Hong Yu Cui. "The Optimal Location of Piezoelectric Sensor/Actuator Based on Adaptive Genetic Algorithm." Applied Mechanics and Materials 635-637 (September 2014): 799–804. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.799.
Дисертації з теми "Sensors and actuators placement":
Szczepanski, Robert Walter. "Optimal placement of actuators and sensors for vibration control using genetic algorithms." Thesis, University of Newcastle Upon Tyne, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341754.
Potami, Raffaele. "Optimal sensor/actuator placement and switching schemes for control of flexible structures." Worcester, Mass. : Worcester Polytechnic Institute, 2008. http://www.wpi.edu/Pubs/ETD/Available/etd-042808-124333/.
Keywords: hybrid system, PZT actuators, performance enchancement, actuator placement, actuator switching. Includes bibliographical references (leaves 102-108).
Polyzos, Dimitrios. ""Measuring System Properties & Structured Diagnostics for the Selection of Sensors, Actuators Placement & Eigenstructure Assignment"." Thesis, City University London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.524712.
Suwit, Pulthasthan Information Technology & Electrical Engineering Australian Defence Force Academy UNSW. "Optimal placement of sensor and actuator for sound-structure interaction system." Awarded by:University of New South Wales - Australian Defence Force Academy. School of Information Technology and Electrical Engineering, 2006. http://handle.unsw.edu.au/1959.4/38741.
Jha, Akhilesh K. "Vibration Analysis and Control of an Inflatable Toroidal Satellite Component Using Piezoelectric Actuators and Sensors." Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/28243.
Ph. D.
MURUGAN, JAYA MAHESH. "Vibration monitoring and control of industrial structures." Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2858351.
Brakna, Mohammed. "Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process." Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
The aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Perini, Efrain Araujo [UNESP]. "Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward." Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/94510.
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Este trabalho apresenta o desenvolvimento de uma análise teórica do desempenho de um sistema de controle ativo utilizando mancais magnéticos como atuadores de não-contato para a redução de vibrações em rotores. São analisados três modelos de rotores, sendo que em um deles aplica-se apenas o controle feedback e os outros são suportados apenas por mancais magnéticos, os quais também são os atuadores do controlador. Assim, Luna arquitetura de controle tipo feedforward é empregada sobreposta ao sistema de controle feedback dos atuadores nestes dois modelos, sendo urna análise realizada em relação ao desempenho do sistema de controle quanto às diferentes geometrias de distribuição de massa acopladas ao eixo do rotor. O enfoque principal deste trabalho é voltado para a análise do desempenho do sistema de controle em função da posição e quantidade dos sensores de erro (onde se deseja minimizar as vibrações) em relação à posição dos atuadores e das forças de excitação. As excitações são do tipo síncronas e sub-síncronas que normalmente aparecem em rotores com elevadas velocidades de rotação, como as turbomáquinas. Também é realizada urna análise das forças de controle necessárias a serem aplicadas pelos atuadores para se obter urna redução dos níveis de vibração do rotor na posição dos sensores de erro do sistema feedforward. A análise é executada empregando modelos de rotores desenvolvidos pelo método da matriz de impedância. Esta pesquisa também apresenta Luna aplicação da técnica de controle Feedforward em acústica, que realiza a depuração da voz para comunicação em ambientes ruidosos.
This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Perini, Efrain Araujo. "Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward /." Ilha Solteira : [s.n.], 2009. http://hdl.handle.net/11449/94510.
Abstract: This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Orientador: Luiz de Paula do Nascimento
Coorientador: Vicente Lopes Junior
Banca: Gilberto Pechoto de Melo
Banca: Kátia Luchese Cavalca Dedini
Mestre
Mitwalli, Ahmed Hamdi. "Polymer gel actuators and sensors." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9969.
Includes bibliographical references (p. [351]-361).
by Ahmed Hamdi Mitwalli.
Sc.D.
Книги з теми "Sensors and actuators placement":
K, Kincaid Rex, and Langley Research Center, eds. Optimization strategies for sensor and actuator placement. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
K, Kincaid Rex, and Langley Research Center, eds. Optimization strategies for sensor and actuator placement. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
Center, Langley Research, ed. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Center, Langley Research, ed. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Osada, Yoshihito. Polymer Sensors and Actuators. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000.
Vigna, Benedetto, Paolo Ferrari, Flavio Francesco Villa, Ernesto Lasalandra, and Sarah Zerbini, eds. Silicon Sensors and Actuators. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80135-9.
Busch-Vishniac, Ilene J. Electromechanical Sensors and Actuators. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-1434-2.
Brauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2006. http://dx.doi.org/10.1002/0471777714.
Brauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118779262.
Rupitsch, Stefan Johann. Piezoelectric Sensors and Actuators. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-57534-5.
Частини книг з теми "Sensors and actuators placement":
Khapalov, Alexander Y. "Degenerate Sensors in Source Localization and Sensor Placement Problems." In Mobile Point Sensors and Actuators in the Controllability Theory of Partial Differential Equations, 123–43. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60414-5_8.
Gawronski, Wodek K. "Actuator and Sensor Placement." In Dynamics and Control of Structures, 100–128. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-0-387-21855-7_7.
Li, Xu, Amiya Nayak, David Simplot-Ryl, and Ivan Stojmenovic. "Sensor Placement in Sensor and Actuator Networks." In Wireless Sensor and Actuator Networks, 263–94. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470570517.ch10.
Gawronski, Wodek. "Balanced sensor and actuator placement." In Balanced Control of Flexible Structures, 107–36. Berlin, Heidelberg: Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/3540760172_5.
Usher, M. J., and D. A. Keating. "Actuators." In Sensors and Transducers, 131–46. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13345-1_9.
Katebi, Reza, Michael A. Johnson, and Jacqueline Wilkie. "Sensors and Actuators." In Advances in Industrial Control, 144–65. London: Springer London, 1999. http://dx.doi.org/10.1007/978-1-4471-0423-0_6.
Sciavicco, Lorenzo, and Bruno Siciliano. "Actuators and Sensors." In Modelling and Control of Robot Manipulators, 295–320. London: Springer London, 2000. http://dx.doi.org/10.1007/978-1-4471-0449-0_8.
Aamo, Ole Morten, and Miroslav Krstić. "Sensors and Actuators." In Flow Control by Feedback, 179–83. London: Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3805-1_6.
Markley, F. Landis, and John L. Crassidis. "Sensors and Actuators." In Fundamentals of Spacecraft Attitude Determination and Control, 123–81. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0802-8_4.
Genta, Giancarlo. "Actuators and Sensors." In Introduction to the Mechanics of Space Robots, 427–82. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-1796-1_7.
Тези доповідей конференцій з теми "Sensors and actuators placement":
Kameyama, Masaki, and Hisao Fukunaga. "Optimal Placement of Sensors and Actuators for Modal Measurement/Control of CFRP Laminated Plates." In ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2008. http://dx.doi.org/10.1115/smasis2008-416.
Späh, Britta, Rudolf Sebastian Schittenhelm, and Stephan Rinderknecht. "Optimal Sensor and Actuator Placement for Active Vibration Control Systems." In ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ncad2012-0982.
Hanagud, S., C. C. Won, and M. W. Obal. "Optimal Placement of Piezoceramic Sensors and Actuators." In 1988 American Control Conference. IEEE, 1988. http://dx.doi.org/10.23919/acc.1988.4790034.
Trease, Brian, and Sridhar Kota. "Topology Synthesis of Compliant Systems With Embedded Actuators and Sensors." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49688.
Al-Masoud, Nidal, and Tarunraj Singh. "Optimal Actuator/Sensor Placement for Control of Combustion Instabilities." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/dsc-24562.
Alnuaimi, Mohammed, Abdulaziz BuAbdulla, Tarcísio Silva, Sumaya Altamimi, Dong-Wook Lee, and Mohamed Al Teneiji. "Active Vibration Control of Piezoelectric Beam Using the PID Controller." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70960.
Gabbert, U., I. Schulz, and C. T. Weber. "Actuator Placement in Smart Structures by Discrete-Continuous Optimization." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-3937.
Trease, Brian P., and Sridhar Kota. "Synthesis of Adaptive and Controllable Compliant Systems With Embedded Actuators and Sensors." In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99266.
Shelley, Franz J., and William W. Clark. "Active Mode Localization in Distributed Parameter Systems With Consideration of Limited Actuator Placement." In ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0575.
SEPULVEDA, A., and L. SCHMIT. "Optimal Placement of Actuators and Sensors in Control Augmented Structural Optimization." In 31st Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1055.
Звіти організацій з теми "Sensors and actuators placement":
Almeida, Oscar J., Brian G. Dixon, Jill H. Hardin, John P. Sanford, and Myles Walsh. High Temperature Smart Sensors and Actuators. Fort Belvoir, VA: Defense Technical Information Center, August 1992. http://dx.doi.org/10.21236/ada256985.
Krulewich, D. A. Handbook of actuators and edge alignment sensors. Office of Scientific and Technical Information (OSTI), November 1992. http://dx.doi.org/10.2172/6788910.
MATERIALS SYSTEMS INC CONCORD MA. Cost-Effective Method for Synthesizing Innovative Transducer Materials for Sensors and Actuators. Fort Belvoir, VA: Defense Technical Information Center, June 1994. http://dx.doi.org/10.21236/ada282339.
Ted Quinn and Jerry Mauck. Digial Technology Qualification Task 2 - Suitability of Digital Alternatives to Analog Sensors and Actuators. Office of Scientific and Technical Information (OSTI), September 2012. http://dx.doi.org/10.2172/1057681.
Cline, Joseph I. Surface Absorption Polarization Sensors (SAPS), Final Technical Report, Laser Probing of Immobilized SAPS Actuators Component. Office of Scientific and Technical Information (OSTI), April 2010. http://dx.doi.org/10.2172/977056.
Beshouri, Greg. PR-309-14212-R01 Field Demonstration of Fully Integrated NSCR System. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), January 2019. http://dx.doi.org/10.55274/r0011545.
Ratmanski, Kiril, and Sergey Vecherin. Resilience in distributed sensor networks. Engineer Research and Development Center (U.S.), October 2022. http://dx.doi.org/10.21079/11681/45680.
Beshouri. PR-309-08208-R01 A Survey of Diagnostics Techniques for Compressor Engines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), September 2009. http://dx.doi.org/10.55274/r0010730.
Dasberg, Shmuel, Jan W. Hopmans, Larry J. Schwankl, and Dani Or. Drip Irrigation Management by TDR Monitoring of Soil Water and Solute Distribution. United States Department of Agriculture, August 1993. http://dx.doi.org/10.32747/1993.7568095.bard.
Tarko, Andrew P., Mario A. Romero, Vamsi Krishna Bandaru, and Cristhian Lizarazo. TScan–Stationary LiDAR for Traffic and Safety Applications: Vehicle Interpretation and Tracking. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317402.