Готові списки джерел за темами / Rubber Glove

Добірка наукової літератури з теми "Rubber Glove"

Автор: Grafiati
Опубліковано: 10 грудня 2022
Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Rubber Glove".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Rubber Glove"

1

Pepper, D. S. "Rubber glove hygiene." British Dental Journal 163, no. 9 (November 1987): 290. http://dx.doi.org/10.1038/sj.bdj.4806281.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lees, A. D. "Rubber glove hygiene." British Dental Journal 163, no. 12 (December 1987): 371. http://dx.doi.org/10.1038/sj.bdj.4806315.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lux, L. B. "Rubber glove hygiene." British Dental Journal 165, no. 5 (September 1988): 159. http://dx.doi.org/10.1038/sj.bdj.4806548.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Williamson, W. V. "RUBBER GLOVE DISPOSAL." Journal of the American Dental Association 133, no. 1 (January 2002): 14. http://dx.doi.org/10.14219/jada.archive.2002.0005.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Seaton, A., B. Cherrie, and J. Turnbull. "Rubber glove asthma." BMJ 296, no. 6621 (February 20, 1988): 531–32. http://dx.doi.org/10.1136/bmj.296.6621.531-a.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Thep-On, Laddawan, Shahariar Chowdhury, Kua-Anan Taechato, Anil Kumar, and Issara Chanakaewsomboon. "Optimization of Biomass Fuel Composition for Rubber Glove Manufacturing in Thailand." Sustainability 14, no. 19 (September 30, 2022): 12493. http://dx.doi.org/10.3390/su141912493.

Повний текст джерела
Анотація:
The demand for rubber gloves has significantly increased in both medical and non-medical fields due to the spread of the coronavirus in 2019. It is challenging for rubber glove manufacturing industries to balance the production and demand for the product. Additionally, they must determine techniques to decrease the production costs so as to make rubber gloves more economical for consumers. Generally, natural gas, fossil fuels, and renewable energy sources are used worldwide in the manufacturing of rubber gloves. In addition, Thailand uses biomass energy for rubber glove production, but biomass utilization is not economically friendly. This study used different biomasses as fuel in rubber glove production so as to reduce production costs and make the process more environmentally friendly. Wood chip (WC), palm kernel shells (PKS), and oil palm mesocarp fiber (OPMF) biomass were collected from local regions and used in different ratios. The samples of WC, PKS, and OPMF were prepared in four different ratios, namely, 88:12:0, 85:15:0, 85:13:2, and 85:10:5, for efficient biomass utilization. The 85:10:5 (WC: PKS: OPMF) ratio was found to be the optimal ratio as the annual production costs of rubber gloves significantly decreased to USD 1.64 per 1000 units of gloves. Furthermore, this biomass ratio also showed the best boiler efficiency of 74.87%. Therefore, WC, PKS, and OPMF biomass are recommended as fuel for rubber glove industries to make sustainable and economical production processes.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Sudhakar, L. R., R. W. Schoenmarklin, S. A. Lavender, and W. S. Marras. "The Effects of Gloves on Grip Strength and Muscle Activity." Proceedings of the Human Factors Society Annual Meeting 32, no. 11 (October 1988): 647–50. http://dx.doi.org/10.1518/107118188786762603.

Повний текст джерела
Анотація:
The focus of this research was to investigate how grip strength and forearm muscle force were affected by two types of gloves, rubber and leather. Grip strength was significantly less in the two gloved conditions than in a barehanded condition. However, EMG analysis of muscle activity revealed no significant difference in muscle activity across the gloved and barehanded conditions, indicating that subjects generated maximal exertions in all conditions. Therefore, a certain amount of muscle force is lost in the hand-glove interface while producing maximal grip forces in the gloved conditions. Internal muscle force measurement could thus be used to aid in glove selection for submaximal tasks in industry.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Rojruthai, Porntip, Jitladda Sakdapipanich, Jinjutha Wiriyanantawong, Chee-Cheong Ho, and Naesinee Chaiear. "Effect of Latex Purification and Accelerator Types on Rubber Allergens Prevalent in Sulphur Prevulcanized Natural Rubber Latex: Potential Application for Allergy-Free Natural Rubber Gloves." Polymers 14, no. 21 (November 2, 2022): 4679. http://dx.doi.org/10.3390/polym14214679.

Повний текст джерела
Анотація:
Natural rubber (NR) gloves manufactured from NR latex are widely utilized in various applications as a personal protective device due to their exceptional barrier characteristics in infection control. However, the use of NR gloves was associated with concerns about an NR protein allergy. With comprehensive leaching procedures now a common practice in NR latex glove factories to eliminate latent rubber proteins and chemical allergens, occurrences and complaints of protein allergy from medical glove users have decreased drastically over the past two decades. The present work aims to eliminate further the residual rubber allergens in NR latex through effective purification of the NR latex and compounding the thus purified latex with an established formulation for allergy-free NR for glove applications. NR latex was purified by deproteinization and saponification, respectively. Several analytical techniques were used to verify rubber allergens eliminated in the purified latexes. Saponified NR (SPNR) latex was the purified NR latex of choice since it is devoid of allergenic proteins and poses the lowest risk of Type I allergy. The purified NR latex was compounded with zinc diethyldithiocarbamate (ZDEC), zinc dibutyldithiocarbamate (ZDBC), and zinc 2-mercaptobenzothiazole (ZMBT), respectively, for glove dipping. Among the investigated accelerators, only ZDBC was not detected in the artificial sweat that came into contact with the dipped articles. Thus, it is deduced that ZDBC poses the lowest risk of Type IV allergy to consumers. Additionally, the morphological and physical properties of dipped articles were assessed. It was revealed that the dipped film from the SPNR latex compounded with ZDBC provided thinner and less yellow products with a more uniform internal structure and a tensile strength comparable to those of commercial NR gloves.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Sarih, Norfatirah Muhamad, Nuur Syuhada Dzulkafly, Simon Maher, and Azura A. Rashid. "Wearable Natural Rubber Latex Gloves with Curcumin for Torn Glove Detection in Clinical Settings." Polymers 14, no. 15 (July 28, 2022): 3048. http://dx.doi.org/10.3390/polym14153048.

Повний текст джерела
Анотація:
Glove tear or perforation is a common occurrence during various activities that require gloves to be worn, posing a significant risk to the wearer and possibly others. This is vitally important in a clinical environment and particularly during surgical procedures. When a glove perforation occurs (and is noticed), the glove must be replaced as soon as possible; however, it is not always noticeable. The present article is focused on the design and development of a novel fluorescence-based sensing mechanism, which is integrated within the glove topology, to help alert the wearer of a perforation in situ. We hypothesized that natural rubber gloves with curcumin infused would yield fluorescence when the glove is damaged, particularly when torn or punctured. The glove design is based on double-dipping between Natural Rubber Latex (NRL) and an inner layer of latex mixed with curcumin, which results in a notable bright yellow-green emission when exposed to UV light. Curcumin (Cur) is a phenolic chemical found primarily in turmeric that fluoresces yellowish-green at 525 nm. The tear region on the glove will glow, indicating the presence of a Cur coating/dipping layer beneath. NRL film is modified by dipping it in a Cur dispersion solution mixed with NRL for the second dipping layer. Using Cur as a filler in NRL also has the distinct advantage of allowing the glove to be made stronger by evenly distributing it throughout the rubber phase. Herein, the optimized design is fully characterized, including physicochemical (fluorescence emission) and mechanical (tensile and tear tests) properties, highlighting the clear potential of this novel and low-cost approach for in situ torn glove detection.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Brod, Bruce A. "Isotretinoin-Induced Rubber Glove Dermatitis." American Journal of Contact Dermatitis 6, no. 3 (September 1995): 194. http://dx.doi.org/10.1097/01634989-199509000-00018.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Rubber Glove"

1

Wahid, Zaharah. "Potential for process improvement of the rubber glove manufacturing process : an industrial case study." Thesis, University of Newcastle Upon Tyne, 1998. http://hdl.handle.net/10443/792.

Повний текст джерела
Анотація:
Coagulant dipping constitutes an important part of the rubber glove manufacturing process. Its operation is affected by many variables which dictates the quality of the finished product. Therefore, investigating the controllable factors affecting the quality of the product and process in the presence of noise factors for process improvement is the primary aim of this study. Robust process design for off-line quality control has received much attention in the literature. Application of this design in the rubber examination glove industry as an alternative solution for potential competitive advantage was investigated. The robust design problem is defined in terms of design objectives, controllable factors and noise factors. In this thesis we combined both controllable and noise factors as a single experimental set-up. An L16 orthogonal array was used as it would allow the evaluation of the eight main factors chosen and some of their interactions. The use of fractional factorial reduces the number of runs required. Physical experiments were conducted in the glove manufacturing plant for the case problem. Effects of experimental errors, model assumptions, the experimental design and modelling approaches on the results are discussed. Models capable of predicting the response performance of the process under study are developed and investigated. Experience learnt from the implementation of quality improvement which are human related factors are also addressed in this thesis. From this study we gained a better understanding of the rubber glove manufacturing process. We are therefore in a better position to see what levels of the independent factors will lead to acceptable response values and acceptable variability. This approach allows us to make appropriate compromises between a target value for the response of interest and resulting variance. The additional knowledge were not known before. It could be used as an advantage for the glove manufacturers to better control their processes. The enormous potential benefits that could be reaped from the information gained about the process quantify the efforts for improvements.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Guo, Wumin. "MODELING OF SOLUBILITY PARAMETERS AND PERMEATION DATA OF ORGANIC SOLVENTS IN BUTYL GLOVES." University of Akron / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=akron1152715794.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

COLLANTES, HUGO D. C. "Fabricacao de luvas cirurgicas com latex de borracha natural vulcanizado com raios gama." reponame:Repositório Institucional do IPEN, 1995. http://repositorio.ipen.br:8080/xmlui/handle/123456789/9257.

Повний текст джерела
Анотація:
Made available in DSpace on 2014-10-09T12:25:22Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:02:20Z (GMT). No. of bitstreams: 1 05826.pdf: 6440180 bytes, checksum: 1c771858083be07c021d9ab59a4f8c36 (MD5)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Стилі APA, Harvard, Vancouver, ISO та ін.
4

De, Beer Corena. "The role of occupational exposure in the development of latex hypersensitivity." Thesis, Cape Technikon, 2000. http://hdl.handle.net/20.500.11838/2240.

Повний текст джерела
Анотація:
Thesis (MTech (Biomedical Technology))--Cape Technikon, 2000.
Professionals in a healthcare setting use latex gloves on a daily basis, primarily to prevent transmission of microbial and viral organisms to and from patients and specimens. Repeated exposure to latex proteins (through direct skin contact or mucous membrane absorption) leads to the formation of circulating latex-specific antibodies and increases the risk of sensitisation. Among all known risk groups, healthcare workers have the highest risk to develop latex hypersensitivity. Early detection of antibodies or predisposing factors (e.g. atopy or impaired skin barrier function), could assist in the identification and management of risk groups and limit possible sensitisation. An experimental group with high occupational latex exposure is compared to a control group with low or no occupational latex exposure at Tygerberg Hospital, Cape Town. A questionnaire was completed by all subjects to obtain a thorough history of past and present latex exposure and to identify other risk factors. A complete physical examination was done to evaluate clinical signs and symptoms of risk factors and latex hypersensitivity. Atopy was evaluated by means of the United Kingdom's Diagnostic Criteria for Atopy, personal and lor family history of atopy, haematogram and total serum IgE analyses. Latex-specific IgE antibodies were measured immunometrically. Skin prick tests were performed on subjects with negative in vitro results, but with predefined clinical symptoms suggestive of latex hypersensitivity. An
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Dai, Jhih-Wei, and 戴智為. "The Permeation of Tetramethyl Ammonium Hydroxide Through Natural Rubber and Nitrile Glove Materials." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/21820611398892141632.

Повний текст джерела
Анотація:
碩士
國立臺灣科技大學
高分子系
97
At present, Tetramethyl Ammonium Hydroxide (TMAH) has been used in large amounts in high-tech industries, such as semiconductor industry and optoelectronics industry. This study aimed to discuss the permeation prevention performance of rubber protective materials against TMAH. The results indicated that, the protective performances of NR protective glove and Nitrile protective glove are better against low-concentration 2.38% TMAH than against high-concentration 25% TMAH. When the ambient temperature is 23℃, the average breakthrough times of NR protective glove and Nitrile protective glove against 25% TMAH are 90.93 minutes and 801.67 minutes respectively; when the ambient temperature reaches 35℃, the average breakthrough times fall by 24% and 43% respectively; therefore, the temperature rise degenerates the protective effect to a considerable extent. If double-layer gloves are used, when the ambient temperature is 23℃, the average breakthrough time against 25% TMAH is as long as 1,592.8 minutes. After being dipped in water, the permeation prevention performance of rubber materials may be affected so that the breakthrough time becomes less. It is important to note that the average breakthrough time reaches 2,033.2 minutes for the combination with Nitrile protective gloves outside and NR gloves inside. The correct arrangement of the two kinds of protective gloves can effectively prevent the permeation of TMAH. This is the best result achieved in this study.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ge, Sen. "Formulation of emulsion systems for the preparation of butyl rubber gloves." Thèse, 2009. http://hdl.handle.net/1866/7836.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Rubber Glove"

1

Sri-akajunt, Naesinee. Sensitisation to natural rubber latex: An epidemiological study of workers exposed during tapping and glove manufacture in Thailand and glove use in a UK hospital. Birmingham: University of Birmingham, 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Workshop on Latex Proteins (1993 Kuala Lumpur, Malaysia). Latex proteins and glove industry: A report of the proceedings of the International Rubber Technology Conference 1993, Workshop on Latex Proteins, held in Kuala Lumpur on 16 June 1993. Kuala Lumpur: Rubber Research Institute of Malaysia, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Muehlenhardt, Amy Bailey, 1974- ill., ed. Whose gloves are these?: A look at gloves workers wear--leather, cloth, and rubber. Minneapolis, Minn: Picture Window Books, 2006.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Gunh, Mellström, Wahlberg Jan E, and Maibach Howard I, eds. Protective gloves for occupational use. Boca Raton: CRC Press, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Sussman, Gordon. Guidelines for the management of latex allergies and safe latex use in healthcare facilities. Ottawa, Ontario: CHA Press, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

2, walter shawlee. Rubber Glove Theory of the Universe and Other Diversions. Lulu Press, Inc., 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Gummihandske-allergi: Frigivelse af thiuramer og carbamater fra gummihandsker. København: Arbejdsmiljøfondet, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Mass. ) Lamkin & Foster (Boston. Illustrated Catalogue of the Goodyear India Rubber Glove Co. 's Boots and Shoes for the Season Of 1885-6. Creative Media Partners, LLC, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Matron's Rubber Gloves. Independently Published, 2017.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Bleasdale, Faith. Rubber Gloves or Jimmy Choos. Flame, 2000.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Rubber Glove"

1

Giménez-Arnau, A. M., and A. Salman. "Management of Natural Rubber Glove Sensitivity." In Protective Gloves for Occupational Use, 227–46. 3rd ed. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003126874-19.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Hamann, Curtis P., Kim M. Sullivan, and Peggy Wright. "Hand Eczema from Rubber Gloves." In Textbook of Hand Eczema, 197–218. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-39546-8_19.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Siegel, Paul D. "Extraction and Chemistry of Rubber Allergens." In Protective Gloves for Occupational Use, 45–60. 3rd ed. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003126874-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Levitt, S., and H. I. Maibach. "Allergic Contact Dermatitis from Rubber and Plastic Gloves." In Protective Gloves for Occupational Use, 193–214. 3rd ed. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003126874-17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Giménez-Arnau, A. M., and A. Salman. "Allergic Responses to Powdered Natural Rubber Latex Gloves in Healthcare Workers." In Protective Gloves for Occupational Use, 247–60. 3rd ed. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003126874-20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Bittner, C., M. V. Garrido, L. H. Krach, and V. Harth. "Content of Asthmagen Natural Rubber Latex Allergens in Commercial Disposable Gloves." In Advances in Experimental Medicine and Biology, 37–44. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/5584_2016_227.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Utama, Marga. "Trial Production of Examination Gloves from Irradiated Natural Rubber Latex on a Factory Scale." In Frontiers of Polymers and Advanced Materials, 649–57. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2447-2_61.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Hamann, Curtis, Pamela Rodgers, and Kim Sullivan. "Management of Natural Rubber Glove Sensitivity." In Protective Gloves for Occupational Use, Second Edition, 155–86. CRC Press, 2004. http://dx.doi.org/10.3109/9780203506813-14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Nuzaimah, M., S. M. Sapuan, R. Nadlene, M. Jawaid, and R. A. Ilyas. "Medical Rubber Glove Waste As Potential Filler Materials in Polymer Composites." In Composites in Biomedical Applications, 191–206. CRC Press, 2020. http://dx.doi.org/10.1201/9780429327766-9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

"Hand Eczema from Rubber Gloves." In Hand Eczema, 392–408. CRC Press, 1993. http://dx.doi.org/10.3109/9780203009697-35.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Rubber Glove"

1

Vishnukumar, Rajandran, Wah Pheng Lee, Mum Wai Yip, Joo Eng Lim, and Yoke Meng Tan. "Capacitive Interdigitated Electrodes Sensor for the Field Device to Measure Moisture Content in the Nitrile Gloves Manufacturing Industry." In International Conference on Digital Transformation and Applications (ICDXA 2021). Tunku Abdul Rahman University College, 2021. http://dx.doi.org/10.56453/icdxa.2021.1001.

Повний текст джерела
Анотація:
This paper investigates the impedance spectroscopy technique in determining moisture content in Nitrile gloves. Interdigitated electrode was designed and fabricated, then evaluated on LCR Impedance meter subjected to frequency range of 100Hz, 120Hz, 1kHz, 10kHz, 20kHz and 100kHz. Samples of Nitrile gloves were compounded and prepared for different moisture content level and regression analysis was performed to evaluate the relationships between capacitance and moisture content of the glove samples. Experimental results indicated that the capacitance value is a strong function of moisture content in gloves and also that the capacitance of moisture content in Nitrile gloves decreased with increasing drying time over the measured frequency range whilst statistical analysis results have confirmed that the 1kHz, 10kHz and 20kHz signal frequencies have highest reliable prediction of the nitrile gloves’ moisture content with high R^2 value of 0.96, 0.97 and 0.97, respectively. The ability to determine average moisture content of Nitrile gloves via a non-destructive and online method, utilizing a low-cost instrument, will be of considerable use in the glove industry. This method could also be extended to other types of gloves and rubber products. Keywords: Inter Digitated Electrode (IDE) sensor, Capacitive sensor, Field Device, Industry 4.0, Moisture content, Nitrile Glove
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Rajashilpa, Nilusha Lakmali, Sadeeka Jayasinghe, and Lahiru Tharanga. "Improving of Adhesion Ability of Laminated Rubber Glove Manufacturing Process." In 2021 From Innovation To Impact (FITI). IEEE, 2021. http://dx.doi.org/10.1109/fiti54902.2021.9833024.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Shibata, Mei, and Robert D. Howe. "The Effects of Gloves on the Performance of a Tactile Perception Task and Precision Grasping." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0002.

Повний текст джерела
Анотація:
Abstract The effect that gloving has on the performance of perceptual and manipulation tasks was studied in this paper. To test perceptual ability, subjects were timed as they detected hard lumps in soft rubber models. Palpation of four different lumps, diameters 3.2 mm, 4.8 mm, 6.4 mm and 7.9 mm, was performed while barehanded and while wearing gloves of thickness 0.32 mm, 0.64 mm, 0.95 mm, 1.27 mm, 1.59 mm and 1.91 mm. Analysis of the data yielded significant differences in lump detection time with glove thickness. Mean times were always best with bare hands and poorest with 1.91 mm glove thickness. Detection time variation was greatest for the 3.2 mm lump. The maximum force applied during palpation increased linearly with glove thickness. To test manipulation ability, seven subjects lifted a 460g object using the thumb and index finger while barehanded and wearing gloves of thickness 0.16 mm, 0.32 mm, 0.95 mm and 1.91 mm. Three different surfaces with varying frictional conditions were used on the object: sandpaper, suede and rayon. Results indicated that the subjects’ ability to adapt to new surfaces decreased with increasing glove thickness, and greater levels of excess grip force were applied. Visual feedback did not play an important role in assisting lift for any glove thickness. The results of the perceptual and manipulation tasks suggest that the effects of gloving are both thickness dependent and highly task sensitive.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Husain, S., N. R. Munirah, A. M. Nasir, and N. H. Ishak. "Characteristics and properties of styrene butadiene rubber/reclaimed nitrile glove (SBR/rNBRg) blend." In PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS ENGINEERING & TECHNOLOGY (ICAMET 2020). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0052108.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Komaromi, Paul. "Live working method comparisons: Rubber glove work vs. hotstick work vs. barehand work." In 2017 12th International Conference on Live Maintenance (ICOLIM). IEEE, 2017. http://dx.doi.org/10.1109/icolim.2017.7964154.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Tadano, Kotaro, Masao Akai, Kazuo Kadota, and Kenji Kawashima. "Development of grip amplified glove using bi-articular mechanism with pneumatic artificial rubber muscle." In 2010 IEEE International Conference on Robotics and Automation (ICRA 2010). IEEE, 2010. http://dx.doi.org/10.1109/robot.2010.5509393.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hsieh, Shang-Rou, Steven W. Shaw, Victor J. Borowski, Jen Yaun Her, and Keith D. Moss. "Rattle Reduction of Automotive Component: A FEM Approach." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-3928.

Повний текст джерела
Анотація:
Abstract Due to the continual diminishment of engine, power train and tire noise levels, squeak and rattle as become a primary source of undesired noise in automobiles. This article presents a finite-element-based methodology for the improvement of rattle performance of vehicle components. This approach attacks complicated nonlinear impact problems involving rigid and flexible structures by a rather indirect method that allows for the generation of design sensitivity information related to impact frequency and severity from large-scale computer models. This is done by adjusting the system parameters of a related linear problem in such a manner that the nonlinear system response is improved. For implementation purposes, it has been applied to study the rattle of the latch and corner rubber snubbers of a glove compartment. Results from the glove compartment study are summarized herein. Extensions to other rattle problems are also highlighted.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Somboonwiwat, Tuanjai, Chorkaew Jaturanonda, Nattapong Chotpan, and Kanogkan Leerojanaprapa. "Optimal Production Volume Of Rubber Gloves Mold For Rubber Gloves Production Planning." In 30th Conference on Modelling and Simulation. ECMS, 2016. http://dx.doi.org/10.7148/2016-0508.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Yu, Naigong, Honglu Wang, Qiao Xu, and Jia Lin. "Defect Detection of Rubber Gloves Based on Normal Samples." In 2021 IEEE 6th International Conference on Cloud Computing and Big Data Analytics (ICCCBDA). IEEE, 2021. http://dx.doi.org/10.1109/icccbda51879.2021.9442497.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Makrushin, Andrey, Kun Qian, Claus Vielhauer, and Tobias Scheidat. "Forensic analysis: on the capability of optical sensors to visualize latent fingerprints on rubber gloves." In 2015 International Workshop on Biometrics and Forensics (IWBF). IEEE, 2015. http://dx.doi.org/10.1109/iwbf.2015.7110229.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Rubber Glove"

1

Vessel, E. M. Investigation of natural latex rubber gloves. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10188886.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Rubber Glove" для конкретних типів джерел:
Статті в журналах Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії