Добірка наукової літератури з теми "Rubber Blends"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Rubber Blends".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Rubber Blends"
Mat Desa, Mohd Shaiful Zaidi, Azman Hassan, Agus Arsad, and Nor Nisa Balqis Mohammad. "Mechanical and Thermal Properties of Rubber Toughened Poly(Lactic Acid)." Advanced Materials Research 1125 (October 2015): 222–26. http://dx.doi.org/10.4028/www.scientific.net/amr.1125.222.
Повний текст джерелаVayyaprontavida Kaliyathan, Abitha, KM Varghese, A. Sreekumaran Nair, and Sabu Thomas. "Rubber–rubber blends: A critical review." Progress in Rubber, Plastics and Recycling Technology 36, no. 3 (December 26, 2019): 196–242. http://dx.doi.org/10.1177/1477760619895002.
Повний текст джерелаUchiyama, Y. "The Effect of the Environment on the Friction and Wear of Blended Rubber." Tire Science and Technology 22, no. 1 (January 1, 1994): 2–18. http://dx.doi.org/10.2346/1.2139533.
Повний текст джерелаDayang Habibah, A. I. H., V. Devaraj, H. Kamarularifin, and Ibrahim Suhawati. "Cure Characteristics and Ageing Resistance of Recovered Waste Pre-Vulcanized Nitrile/Epoxidized Natural Rubber Latex Blends in Nitrile Butadiene Rubber Compounds." Advanced Materials Research 1119 (July 2015): 347–51. http://dx.doi.org/10.4028/www.scientific.net/amr.1119.347.
Повний текст джерелаWirjosentono, B., Tamrin, A. H. Siregar, and D. A. Nasution. "Mechanical, thermal and adhesion characteristics of natural rubber/epoxidised natural rubber (NR/ENR 25) blends containing natural microbentonite." IOP Conference Series: Earth and Environmental Science 912, no. 1 (November 1, 2021): 012073. http://dx.doi.org/10.1088/1755-1315/912/1/012073.
Повний текст джерелаGhosh, Arun, R. S. Rajeev, A. K. Bhattacharya, A. K. Bhowmick, S. K. De, B. Wolpensinger, and S. Bandyopadhyay. "Atomic Force Microscopic Studies on Microheterogeneity of Blends of Silicone Rubber and Tetrafluoroethylene/Propylene/Vinylidene Fluoride Terpolymer." Rubber Chemistry and Technology 76, no. 1 (March 1, 2003): 220–38. http://dx.doi.org/10.5254/1.3547736.
Повний текст джерелаBOONDAMNOEN, O., M. OHSHIMA, A. R. AZURA, S. CHUAYJULJIT, and A. ARIFFIN. "RECYCLING WASTE NATURAL RUBBER LATEX BY BLENDING WITH POLYSTYRENE – CHARACTERIZATION OF MECHANICAL PROPERTIES." International Journal of Modern Physics: Conference Series 06 (January 2012): 391–96. http://dx.doi.org/10.1142/s2010194512003492.
Повний текст джерелаAntony, Prince, S. K. De, and Martin van Duin. "Self-Crosslinking Rubber/Rubber and Rubber/Thermoplastic Blends: A Review." Rubber Chemistry and Technology 74, no. 3 (July 1, 2001): 376–408. http://dx.doi.org/10.5254/1.3547644.
Повний текст джерелаGhosh, Arun, and S. K. De†. "Dependence of Physical Properties and Processing Behavior of Blends of Silicone Rubber and Fluororubber on Blend Morphology." Rubber Chemistry and Technology 77, no. 5 (November 1, 2004): 856–72. http://dx.doi.org/10.5254/1.3547856.
Повний текст джерелаZhang, Yinxi, Yong Zhang, Shuyu Han, Xiangfu Zhang, and Changqing Yang. "Effects of Compatibilisers on the Properties of Polyvinyl Chloride/Nonpolar Rubbers Blends." Engineering Plastics 2, no. 3 (January 1994): 147823919400200. http://dx.doi.org/10.1177/147823919400200305.
Повний текст джерелаДисертації з теми "Rubber Blends"
Lewan, Michael Victor. "Crosslink density distributions in natural rubber/nitrile rubber blends." Thesis, Loughborough University, 1995. https://dspace.lboro.ac.uk/2134/32972.
Повний текст джерелаChoi, Jaesun. "Ultrasonically Aided Extrusion of Rubber Nanocomposites and Rubber Blends." University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1362747207.
Повний текст джерелаHuynh, Anh Nhut Materials Science & Engineering Faculty of Science UNSW. "Rubber-polymer blends: a thesis in polymer engineering." Awarded by:University of New South Wales. Materials Science & Engineering, 2007. http://handle.unsw.edu.au/1959.4/40833.
Повний текст джерелаEgodage, Shantha M. "The development of rubber-thermoplastic blends from ground tyre rubber and waste polypropylene." Thesis, Loughborough University, 2008. https://dspace.lboro.ac.uk/2134/36154.
Повний текст джерелаEuchler, Eric, Radek Stocek, Michael Gehde, Jörg-Michael Bunzel, Wolfgang Saal, and Reinhold Kipscholl. "Fracture behavior of rubber powder modified rubber blends applied for conveying belt top covers." Universitätsbibliothek Chemnitz, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-198136.
Повний текст джерелаEuchler, Eric, Radek Stocek, Michael Gehde, Jörg-Michael Bunzel, Wolfgang Saal, and Reinhold Kipscholl. "Fracture behavior of rubber powder modified rubber blends applied for conveying belt top covers." Technische Universität Chemnitz, 2014. https://monarch.qucosa.de/id/qucosa%3A20409.
Повний текст джерелаGoktas, Ahmet. "Electrospinning Of Polystyrene/butly Rubber Blends: A Parametric Study." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609361/index.pdf.
Повний текст джерела(i) an AC/DC high voltage equipment which creates high electrical potential, (ii) a syringe, and (iii) a collecting screen. The purpose of this study is to electrospin polystyrene/butyl rubber blends and to investigate the effects of electrospinning parameters on the fibers produced. In this study, polystyrene/butyl rubber blends were electrospun by changing the applied voltage, the tip-to-collector distance, the flowrate, and the butyl rubber content in the fiber. Finally, morphology of electrospun fibers was characterized by SEM. The average fiber diameters varied from 760 nm to nearly 10 µ
m. Increasing butyl rubber content in the fiber resulted in a decrease in the final fiber diameter. Increasing applied voltage also caused a decrease in the final fiber diameter. The tip-to-collector distance did not affect the average fiber diameter. Increasing flowrate yielded fibers with larger diameters. Finally, the addition of non-ionic surfactant decreased the average fiber diameter.
Sagoo, P. S. "Vapour transport in natural rubber blends and graft copolymers." Thesis, Imperial College London, 1985. http://hdl.handle.net/10044/1/37842.
Повний текст джерелаBussi, Philippe Jacques. "Dynamic mechanical properties of epoxy resin/epoxidized rubber blends." Case Western Reserve University School of Graduate Studies / OhioLINK, 1993. http://rave.ohiolink.edu/etdc/view?acc_num=case1060697951.
Повний текст джерелаTaksapattanakul, Korn. "Thermoplastic Vulcanizates Based on Hydrogenated Natural Rubber/Polypropylene Blends." Thesis, Le Mans, 2016. http://www.theses.fr/2016LEMA1028/document.
Повний текст джерелаThe non-catalytic hydrogenation of natural rubber latex (NRL) was carried out by using diimide generated in situ from the reaction between hydrazine (N2H4) and hydrogen peroxide (H2O2). The effects of mole ratios of [C=C]:[N2H4]:[H2O2], reaction conditions, solvent types, solvent volumes and reaction scale-up on the hydrogenation levels were investigated. Nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and Raman spectroscopic techniques were employed to investigate the chemical structure of the hydrogenated natural rubber (HNRs) and to quantify the hydrogenationlevels. It was found that variations in moles of N2H4 and H2O2 in the range of 1.0-2.0 moles resulted in degrees of hydrogenation in the range of 10-18%. Little improvement in hydrogenation levels of HNRs was obtained when NRL particles were swollen in solvents by which toluene yielded better results than hexane. The increase in toluenevolume resulted in the increase in hydrogenation levels up to 42 %. TEM micrographs revealed that swelling mainly occurred at the surface of NRL particles, implying that hydrogenation reaction confined largely at the surface of NRL particles. After removal of toluene, particle size and particle size distribution of partially hydrogenated NRL remained unchanged. To further improve degrees of hydrogenation, the reaction volume was extended and 65% hydrogenation levels were obtained. Therefore, 14%HNR, 33%HNR, and 65%HNR were successfully prepared under suitable reaction conditions. However, crosslinking and cis-trans isomerization were side-reactions occurring during hydrogenation. Gel and trans contents increased with increasing hydrogenation levels, leading to the increase in hardness of HNRs. Mooney viscosities of HNRs increased with increasing degrees of hydrogenation due to the increased gel contents. Mooney torquerelaxation of NR and HNRs were similar. Thermogravimetric analysis revealed that vi HNRs had greater thermal stability than NR and thermal stability increased with increasing degrees of hydrogenation. HNR vulcanizates were much better resistant to ozone and UV than cured NR. Sulfur-vulcanized rubbers had greater ozone resistance than peroxide-cure rubbers due to less amounts of carbon-carbon double bonds present in rubbers. In addition, modulus at low strain and tensile strength of sulfur-cured rubbers were higher than those of peroxide-cured rubbers, but lower elongation due to higher crosslink densities. Also, modulus at low strain and tensile strength increased with increasing hydrogenation levels of HNRs, in contrast to strain at break. Thermoplastic vulcanizates (TPVs) from blends of HNR and Polypropylene (PP) were prepared via dynamic vulcanization using peroxide and sulfur as curing agents. The effects of blend ratios on mechanical properties of TPVs were investigated. Tensile strength increased with increasing PP portions, but breaking strain decreased. Morphology of TPVs was characterized with Raman mapping and scanning electron microscope (SEM). The phase sizes of crosslinked rubber obtained from both techniques were correlated well
Книги з теми "Rubber Blends"
Markovic, Gordana, and Visakh P. M., eds. Rubber Nano Blends. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-48720-5.
Повний текст джерелаTinker, Andrew J., and Kevin P. Jones, eds. Blends of Natural Rubber. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-4922-8.
Повний текст джерелаThomas, Sabu, Christophe Sinturel, and Raju Thomas, eds. Micro- and Nanostructured Epoxy/Rubber Blends. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527666874.
Повний текст джерела1941-, De S. K., and Bhowmick Anil K. 1954-, eds. Thermoplastic elastomers from rubber-plastic blends. New York: Ellis Horwood, 1990.
Знайти повний текст джерелаJ, Tinker Andrew, Jones Kevin P, and Common Fund for Commodities (United Nations), eds. Blends of natural rubber: Novel techniques for blending with speciality polymers. London: Chapman & Hall, 1998.
Знайти повний текст джерелаMaterials science of polymers: Plastics, rubber, blends, and composites. Oakville, ON: Apple Academic Press, 2015.
Знайти повний текст джерелаTinker, Andrew J. Blends of Natural Rubber: Novel Techniques for Blending with Speciality Polymers. Dordrecht: Springer Netherlands, 1998.
Знайти повний текст джерелаVisakh, P. M., and Gordana Markovic. Rubber Based Nano Blends: Preparation. Royal Society of Chemistry, The, 2016.
Знайти повний текст джерелаLewn, Michael Victor. Crosslink density distributions in natural rubber/nitrile rubber blends. 1995.
Знайти повний текст джерелаThomas, Raju, Sabu Thomas, and Christophe Sinturel. Micro- And Nanostructured Epoxy/Rubber Blends. Wiley-VCH Verlag GmbH, 2014.
Знайти повний текст джерелаЧастини книг з теми "Rubber Blends"
Corish, P. J. "Rubber-Rubber Blends." In Polymer Blends and Mixtures, 245–65. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5101-3_12.
Повний текст джерелаIsayev, Avraam I., and Tian Liang. "Morphology of Rubber/Rubber Blends." In Encyclopedia of Polymer Blends, 299–334. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2016. http://dx.doi.org/10.1002/9783527653966.ch5.
Повний текст джерелаCorish, P. J. "Rubber-Plastics Blends." In Polymer Blends and Mixtures, 453–55. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5101-3_29.
Повний текст джерелаRoland, C. M. "Immiscible Rubber Blends." In Advanced Structured Materials, 167–81. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-20925-3_6.
Повний текст джерелаGaymans, R. J., and R. J. M. Borggreve. "Nylon-Rubber Blends." In Integration of Fundamental Polymer Science and Technology—2, 248–51. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-1361-5_37.
Повний текст джерелаVisakh P.M. "Rubber Nanoblends: State of the Art, New Challenges and Opportunities." In Rubber Nano Blends, 1–13. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48720-5_1.
Повний текст джерелаNirmal Ghosh, Oriparambil Sivaraman, S. Gayathri, P. Sudhakara, S. K. Misra, and J. Jayaramudu. "Natural Rubber Nanoblends: Preparation, Characterization and Applications." In Rubber Nano Blends, 15–65. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48720-5_2.
Повний текст джерелаRempel, Garry L., and Hui Wang. "Nitrile Rubber Latex Blends: Preparation, Characterization and Applications." In Rubber Nano Blends, 67–88. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48720-5_3.
Повний текст джерелаAbdeen, Zizi I. "Polyurethane Rubber-Based Nanoblends: Preparation, Characterization and Applications." In Rubber Nano Blends, 89–103. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48720-5_4.
Повний текст джерелаMarković, Gordana, Milena Marinović-Cincović, Vojislav Jovanović, Suzana Samaržija-Jovanović, and Jaroslava Budinski-Simendić. "Chlorosulfonated Rubber-Based Nanoblends: Preparation, Characterization and Applications." In Rubber Nano Blends, 105–53. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48720-5_5.
Повний текст джерелаТези доповідей конференцій з теми "Rubber Blends"
Benseddiq, Noureddine, Moussa Nai¨t-Abdelaziz, and Nai¨ma Belayachi. "Numerical Modelling of Cavitation in Polymer-Rubber Blends." In ASME 2008 Pressure Vessels and Piping Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/pvp2008-61258.
Повний текст джерелаSkalkova, Petra. "APPLICATION OF BIOPOLYMER IN NATURAL RUBBER BLENDS." In 14th SGEM GeoConference on NANO, BIO AND GREEN � TECHNOLOGIES FOR A SUSTAINABLE FUTURE. Stef92 Technology, 2014. http://dx.doi.org/10.5593/sgem2014/b61/s25.036.
Повний текст джерелаSaimi, N. S. S., S. N. L. Mamauod, N. A. Majid, S. S. Sarkawi, and Z. Z. Abidin. "Mechanical properties of tire reclaimed rubber/NR blends: Effect of blend ratios." In PROCEEDINGS OF GREEN DESIGN AND MANUFACTURE 2020. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0044664.
Повний текст джерелаBošák, Ondrej, Jozef Preťo, Vladimír Labaš, Marian Kubliha, Pavol Koštial, Ján Hronkovič, and Stanislav Minárik. "Electrical conductivity of rubber blends containing zeolite filler." In TIM 18 PHYSICS CONFERENCE. Author(s), 2019. http://dx.doi.org/10.1063/1.5090067.
Повний текст джерелаPahari, Swagata, Prasenjit Ghosh, and Rabindra Mukhopadhyay. "Prediction of Thermodynamic and Viscoelastic Properties of Rubber Using Molecular Simulations." In International Conference on Automotive Materials and Manufacturing AMM 2023. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-28-1312.
Повний текст джерелаJawad, Akram Jassim, Auda J. Braihi, Abdul Amir H. Kadhum, Hakim S. Sultan Aljibori, Ahmed A. Alamiery, Tayser S. Gaaz, Hasan Sh Majdi, and Hussein Ali Al-Bahrani. "Rheological and mechanical evaluation of Natural Rubber/Styrene-Butadiene Rubber blends for interlocked flooring applications." In CONFERENCE ON MATHEMATICAL SCIENCES AND APPLICATIONS IN ENGINEERING: CMSAE-2021. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0149020.
Повний текст джерелаMartinez, Roberto Fernandez, Maider Iturrondobeitia, Pello Jimbert, and Julen Ibarretxe. "Tensile strength prediction of rubber blends using linear regression techniques." In 2017 IEEE 4th International Conference on Soft Computing & Machine Intelligence (ISCMI). IEEE, 2017. http://dx.doi.org/10.1109/iscmi.2017.8279624.
Повний текст джерелаLopatková, Martina, Jozef Feranc, Pavol Alexy, Ivan Hudec, and Jozef Preťo. "Measuring techniques of rheological properties of rubber blends from industry." In NOVEL TRENDS IN RHEOLOGY VIII. Author(s), 2019. http://dx.doi.org/10.1063/1.5109512.
Повний текст джерелаAbd-El-Messieh, S. L. "Dielectric and mechanical properties of waste polyethylene - natural rubber blends." In Eighth International Conference on Dielectric Materials, Measurements and Applications. IEE, 2000. http://dx.doi.org/10.1049/cp:20000499.
Повний текст джерелаPetrach, Elaine, Ismat Abu-Isa, and Xia Wang. "Improvement of Mechanical Properties of Elastomer-Plastic Conductive Composites for Bipolar Plates in Proton Exchange Membrane Fuel Cells." In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33071.
Повний текст джерелаЗвіти організацій з теми "Rubber Blends"
Hafez, M., A. S. Doma, A. Y. Zanaty, A. S. Abdel-Rahman, S. A. Khairy, and H. H. Hassan. Some Physical Properties of SBR/NBR Rubber Blends-Loaded with Nano-Sized Black Fillers. MTPR Journal, September 2019. http://dx.doi.org/10.19138/mtpr/(18)1-10.
Повний текст джерелаHafez, M., A. S. Doma, A. Y. Zanaty, A. S. Abdel-Rahman, S. A. Khairy, and H. H. Hassan. Some Physical Properties of SBR/NBR Rubber Blends-Loaded with Nano-Sized Black Fillers. J. Modern Trends in Phys. R., Vol. 19 (MTPR-18) pp. 1-10, September 2019. http://dx.doi.org/10.19138/mtpr/(19)1-10.
Повний текст джерелаLOUKAKOS, P. A., E. STRATAKIS, G. D. TSIBIDIS, D. GRAY, M. BARBEROGLOU, and C. FOTAKIS. Abstract- Blends of Natural Rubber/Styrene Butadiene Rubber (NR/SBR) loaded with different ratios of N220 carbon black filler were prepared. The mechanical properties of pure blends and those loaded with different ratios of carbon black were investigated. Edited by Lotfia Elnai and Ramy Mawad. Journal of Modern trends in physics research, December 2014. http://dx.doi.org/10.19138/mtpr/(14)42-54.
Повний текст джерела