Готові списки джерел за темами / Robustesse en mode DC

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Robustesse en mode DC"

Автор: Grafiati

Опубліковано: 1 березня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Robustesse en mode DC".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Robustesse en mode DC"

Benabderrahman, Hossam Eddine, Rachid Taleb, M'hamed Helaimi, and Fayçal Chabni. "Commande par mode glissant d’ordre deux d’un moteur asynchrone lié à un convertisseur multi-niveau asymétrique." Journal of Renewable Energies 21, no. 2 (June 30, 2018): 267–78. http://dx.doi.org/10.54966/jreen.v21i2.687.

Повний текст джерела

Анотація:

Afin de pouvoir améliorer le rendement délivré à la charge, autrement dit la qualité de la tension de sortie des moyennes qui ont été utilisées parmi ces derniers: l'utilisation d'un onduleur multi-niveau au lieu de l'onduleur à deux niveaux, une seconde solution basée sur le choix de commande d'un moteur. Dans notre article, on a choisi la technique de commande par mode glissant d'ordre supérieure, cette commande conserve les mêmes performances de robustesse et de stabilité données par le mode glissant classique tout en réduisant le broutement.

Стилі APA, Harvard, Vancouver, ISO та ін.

Xu Hong-Mei, Jin Yong-Gao, and Guo Shu-Xu. "Entropy in voltage mode controlled discontinuous conducting mode DC-DC converters." Acta Physica Sinica 62, no. 24 (2013): 248401. http://dx.doi.org/10.7498/aps.62.248401.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Utkin, Vadim. "Sliding mode control of DC/DC converters." Journal of the Franklin Institute 350, no. 8 (October 2013): 2146–65. http://dx.doi.org/10.1016/j.jfranklin.2013.02.026.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lo, Y. K., J. M. Wang, H. J. Chiu, and C. H. Chang. "Dual-mode-control multiphase DC∕DC converter." IET Electric Power Applications 1, no. 2 (2007): 229. http://dx.doi.org/10.1049/iet-epa:20060158.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Guldemir, Hanifi. "Sliding Mode Control of Dc-Dc Boost Converter." Journal of Applied Sciences 5, no. 3 (February 15, 2005): 588–92. http://dx.doi.org/10.3923/jas.2005.588.592.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Drakunov, Sergey V., Mahmut Reyhanoglu, and Brij Singh. "Sliding Mode Control of DC-DC Power Converters." IFAC Proceedings Volumes 42, no. 19 (2009): 237–42. http://dx.doi.org/10.3182/20090921-3-tr-3005.00043.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Martinez-Salamero, L., A. Cid-Pastor, A. El Aroudi, R. Giral, J. Calvente, and G. Ruiz-Magaz. "Sliding-Mode Control of DC-DC Switching Converters." IFAC Proceedings Volumes 44, no. 1 (January 2011): 1910–16. http://dx.doi.org/10.3182/20110828-6-it-1002.00557.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Trescases, Olivier, Aleksandar Prodic, and Wai Tung Ng. "Digitally Controlled Current-Mode DC–DC Converter IC." IEEE Transactions on Circuits and Systems I: Regular Papers 58, no. 1 (January 2011): 219–31. http://dx.doi.org/10.1109/tcsi.2010.2071490.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Leyva-Ramos, J., and J. A. Morales-Saldana. "Uncertainty models for switch-mode DC-DC converters." IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications 47, no. 2 (2000): 200–203. http://dx.doi.org/10.1109/81.828573.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Morales-Saldana, J. A., E. E. C. Guti, and J. Leyva-Ramos. "Modeling of switch-mode dc-dc cascade converters." IEEE Transactions on Aerospace and Electronic Systems 38, no. 1 (January 2002): 295–99. http://dx.doi.org/10.1109/7.993249.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Robustesse en mode DC"

Said, Nasri. "Evaluation de la robustesse des technologies HEMTs GaN à barrière AlN ultrafine pour l'amplification de puissance au-delà de la bande Ka." Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0425.

Повний текст джерела

Анотація:

La filière GaN est stratégique pour l'Union Européenne car elle permet d'améliorer la puissance et le rendement des systèmes radar et de télécommunication, notamment dans les bandes S à Ka (jusqu'à 30 GHz). Pour répondre aux besoins des futures applications, telles que la 5G et les systèmes militaires, le développement des technologies GaN vise à augmenter les fréquences jusqu'aux ondes millimétriques. Cela nécessite d'optimiser l'épitaxie et la réduction de la longueur de grille à moins de 150 nm, ainsi que l'utilisation de barrières ultrafines (<10 nm) pour éviter les effets de canaux courts. La substitution de la barrière AlGaN par du AlN représente une solution pour maintenir de bonnes performances tout en miniaturisant les composants. Dans ces travaux de thèse, plusieurs variantes technologiques à barrière AlN ultrafine (3 nm) sur des canaux GaN non-dopés de différentes épaisseurs, développées par le laboratoire IEMN sont étudiés. L'évaluation des performances et de la robustesse de ces technologies, cruciale pour leur qualification et utilisation dans des missions à long-terme, sont ainsi menées en mode DC et RF afin de définir les zones de sécurité de fonctionnement (SOA) et d’identifier les mécanismes de dégradation.La campagne de caractérisation DC et pulsée a révélé une faible dispersion des composants après leur stabilisation électrique, reflétant une bonne maîtrise technologique : ceci permet par ailleurs des études statistiques et des analyses génériques plus pertinentes sur l’ensemble des lots de composants étudiés. L'analyse de la sensibilité des dispositifs à des températures allant jusqu'à 200°C a prouvé la forte stabilité thermique des performances en mode diode et transistor, en suivant les indicateurs paramétriques représentatifs des modèles électriques des composants (courants de saturation et courants de fuite, tension de seuil, taux de retard aux commandes entrée sortie, …). L’ajout d’une barrière arrière AlGaN sur une couche tampon moyennement dopée C a réglé le compromis entre confinement des électrons et densités de pièges. Les tests de vieillissement accéléré en mode DC à différents points de polarisation et en mode RF par paliers de puissance d’entrée ont montré que la barrière arrière AlGaN confère une meilleure stabilité des courants de fuite et des courbes I(V) statiques, une réduction des effets de piégeage et d'auto-échauffement, ainsi qu'une extension de la SOA-DC opérationnelle. Les tests de vieillissement accéléré en mode dynamique à 10 GHz sur des HEMTs avec différents espacements grille-drain ont montré que la SOA-RF ne dépend pas de cet espacement, mais plutôt de la capacité de la grille à supporter des signaux RF élevés, avant dégradation brutale de cette dernière. En utilisant une méthode de modélisation non linéaire originale, prenant en compte le phénomène d'auto-polarisation, les dispositifs avec barrière AlGaN se sont révélés plus robustes également en RF. Cela se traduit par leur compression plus tardive de gain, allant jusqu’à +10dB et sans dégradation électrique ainsi que structurelle apparente (observée par photoluminescence). Indépendamment de la variante AlN/GaN, le mécanisme de dégradation en stress RF correspond au claquage abrupt de la grille Schottky conduisant à sa défaillance. Ces résultats prouvent que les composants sont plus sensibles aux conditions de polarisation DC qu’au niveau de signal RF injecté [...]
The GaN industry is strategic for the European Union because it enhances the power and efficiency of radar and telecommunication systems, especially in the S to Ka bands (up to 30 GHz). To meet the needs of future applications such as 5G and military systems, GaN technology development aims to increase frequencies to the millimeter-wave range. This requires optimizing epitaxy and reducing the gate length to less than 150 nm, as well as using ultrathin barriers (<10 nm) to avoid short-channel effects. Replacing the AlGaN barrier with AlN is a solution to maintain good performance while miniaturizing devices. In this thesis, several technological variants with an ultrathin AlN barrier (3 nm) on undoped GaN channels of various thicknesses, developed by the IEMN laboratory, are studied. The evaluation of the performance and robustness of these technologies, crucial for their qualification and use in long-term profil missions, is conducted in both DC and RF modes to define the safe operating areas (SOA) and identify degradation mechanisms.The DC and pulsed characterization campaign revealed low component dispersion after electrical stabilization, reflecting good technological control. This also allows for more relevant statistical studies and generic analyses across all component batches studied. The sensitivity analysis of the devices at temperatures up to 200°C demonstrated strong thermal stability in diode and transistor modes, following parametric indicators representative of the electrical models of the components (saturation currents and leakage currents, threshold voltage, gate and drain lags rates, ...). The addition of a AlGaN back-barrier on a moderately C-doped buffer layer resolved the trade-off between electron confinement and trap densities. Accelerated aging tests in DC mode at various biasing conditions and in RF mode by input power steps showed that the AlGaN back-barrier provides better stability in leakage currents and static I(V) curves, reduces trapping and self-heating effects, and extends the operational DC-SOA.Dynamic accelerated aging tests at 10 GHz on HEMTs with different gate-drain spacings showed that the RF-SOA does not depend on this spacing but rather on the gate's ability to withstand high RF signals before abrupt degradation occurs. Using an original nonlinear modeling method that considers the self-biasing phenomenon, devices with the AlGaN back-barrier proved to be more robust in RF as well. This is reflected in their later gain compression, up to +10 dB, without apparent electrical or structural degradation (as observed by photoluminescence). Regardless of the AlN/GaN variant, the RF stress degradation mechanism corresponds to the abrupt breakdown of the Schottky gate, leading to its failure. These results indicate that the components are more sensitive to DC bias conditions than to the level of injected RF signals [...]

Стилі APA, Harvard, Vancouver, ISO та ін.

Peng, Hao. "Digital current mode control of DC-DC converters." Diss., Connect to online resource, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3207767.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lau, Wai Keung. "Current-mode DC-DC buck converter with dynamic zero compensation /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?ECED%202006%20LAU.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Ji M. Eng Massachusetts Institute of Technology. "Spread spectrum modulation system for burst mode DC-DC converters." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/36906.

Повний текст джерела

Анотація:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Includes bibliographical references (leaves 91-92).
This thesis develops a spread spectrum switching system for DC-DC converters operating in burst mode. Burst mode DC-DC converters have high efficiency under low-power conditions in applications such as cell phones and notebook computers, but often produce noise in the audible range. This thesis explores a frequency modulation scheme and transient control that attenuates audible noise harmonics while minimizing the tradeoff for converter regulation, efficiency, and output voltage ripple.
by Ji Zhang.
M.Eng.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mai, Yuan Yen. "Current-mode DC-DC buck converter with current-voltage feedforward control /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?ECED%202006%20MAI.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wan, Kai. "Advanced current-mode control techniques for DC-DC power electronic converters." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2009. http://scholarsmine.mst.edu/thesis/pdf/Wan_09007dcc80642d38.pdf.

Повний текст джерела

Анотація:

Thesis (Ph. D.)--Missouri University of Science and Technology, 2009.
Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed May 4, 2009) Includes bibliographical references.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mamarelis, Emilio. "Sliding mode control of DC/DC switching converters for photovoltaic applications." Doctoral thesis, Universita degli studi di Salerno, 2013. http://hdl.handle.net/10556/1018.

Повний текст джерела

Анотація:

2011 - 2012
The maximum power point tracking (MPPT) is one of the most important features of a system that process the energy produced by a photovoltaic generator must hold. It is necessary, in fact, to design a controller that is able to set the value of voltage or current of the generator and always ensure the working within its maximum power point. This point can considerably change its position during the day, essentially due to exogenous variations, then sunshine and temperature. The MPPT techniques presented in literature and adopted in commercially devices operate a voltage control of the photovoltaic generator and require careful design of the control parameters. It is in fact complex obtain high performance both in stationary that strongly variable conditions of sunshine without a careful choice of some parameters that affect in both conditions the performance of the algorithm for the MPPT. In this thesis has been addressed the analysis of an innovative current-based MPPT technique: the sensing of the current in the capacitor placed in parallel with the photovoltaic source is one of the innovative aspects of the proposal. The controller is based on a nonlinear control technique called ”sliding mode” of which has been developed an innovative model that allow to obtain a set of conditions and enable the designing of the controller with extreme simplicity. The model also allow to demonstrate how the performance of this MPPT control tecnique are independent not only from the characteristics and operating conditions of the photovoltaic generator, but also by the parameters of the switching converter that implements the control. This property allows a significantly simplification in the designing of the controller and improve the performance in presence of rapid changes of the irradiance. An approach to the dynamic analysis of a class of DC/DC converters controlled by a sliding mode based maximum power point tracking for photovoltaic applications has been also presented. By referring to the boost and SEPIC topologies, which are among the most interesting ones in photovoltaic applications, a simple analytical model is obtained. It accounts for the sliding mode technique that allows to perform the maximum power point tracking of the photovoltaic generator connected at the converters input terminals. Referring to the previous approach, a correction term allowing to have an increased accuracy of the model at high frequencies has been also derived. The control technique proposed has been implemented by means of low cost digital controller in order to exploit the potential offered by the hardware device and optimize the performance of the controller. An extensive experimental analysis has allowed to validate the results of the research. The laboratory measurements were conducted on prototypes of DC/DC converters, boost and SEPIC, carried out by Bitron SpA. There are a considerable experimental tests both in the time and in the frequency domain , both using source generator in laboratory than photovoltaic panels. The results and theoretical simulations have found a large validation through laboratory measurements. [edited by author]
XI n.s.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hekman, Thomas P. "Analysis, simulation, and fabrication of current mode controlled DC-DC power converters." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1999. http://handle.dtic.mil/100.2/ADA374067.

Повний текст джерела

Анотація:

Thesis (M.S. in Electrical Engineering) Naval Postgraduate School, December 1999.
"December 1999". Thesis advisor(s): John G. Ciezki. Includes bibliographical references (p. 91-94). Also available online.

Стилі APA, Harvard, Vancouver, ISO та ін.

Baglan, Fuat Onur. "Design Of An Educational Purpose Multifunctional Dc/dc Converter Board." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/2/12610103/index.pdf.

Повний текст джерела

Анотація:

In this thesis a multifunctional DC/DC converter board will be developed for utilization as an educational experiment set in the switched-mode power conversion laboratory of power electronic courses. The board has a generic power-pole structure allowing for easy configuration of various power converter topologies and includes buck, boost, buck-boost, flyback, and forward converter topologies. All the converters can be operated in the open-loop control mode with a switching frequency range of 30-100 kHz and a maximum output power of 20 W. Also the buck converter can be operated in voltage mode control and the buck-boost converter can be operated in peak-current-mode control for the purpose of demonstrating the closed loop control performance of DC/DC converters. The designed board allows for experimentation on the DC/DC converters to observe the macroscopic (steadystate/ dynamic, PWM cycle and low frequency) and microscopic (switching dynamic) behavior of the converters. In the experiments both such characteristics can be clearly observed such that students at basic learning level (involving only the macroscopic behavior), and students at advanced learning level (additionally involving the parasitic effects) can benefit from the experiments. The thesis reviews the switch mode conversion principles, gives the board design and proceeds with the experiments illustrating the capabilities of the experimental system.

Стилі APA, Harvard, Vancouver, ISO та ін.

Saini, Dalvir K. "True-Average Current-Mode Control of DC-DC Power Converters: Analysis, Design, andCharacterization." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1531776568809249.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Robustesse en mode DC"

Kislovski, André S., Richard Redl, and Nathan O. Sokal. Dynamic Analysis of Switching-Mode DC/DC Converters. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-7849-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Richard, Redl, and Sokal Nathan O, eds. Dynamic analysis of switching-mode DC/DC converters. New York: Van Nostrand Reinhold, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ahmed, Mohammad. Sliding mode control for switched mode power supplies. Lappeenranta: Lappeenranta University of Technology, 2004.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Yanfeng, and Bo Zhang. Equivalent-Small-Parameter Analysis of DC/DC Switched-Mode Converter. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-2574-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kislovski, Andre. Dynamic Analysis of Switching-Mode DC/DC Converters. Springer, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dynamic Analysis of Switching-Mode DC/DC Converters. Springer, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kislovski, Andre. Dynamic Analysis of Switching-Mode DC/DC Converters. Springer London, Limited, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kazimierczuk, Marian K., Agasthya Ayachit, and Dalvir K. Saini. Average Current-Mode Control of DC-DC Power Converters. Wiley & Sons, Incorporated, John, 2022.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Saini, Dalvir K. Average Current-Mode Control of Dc-Dc Power Converters. Wiley & Sons, Limited, John, 2022.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kazimierczuk, Marian K., Agasthya Ayachit, and Dalvir K. Saini. Average Current-Mode Control of DC-DC Power Converters. Wiley & Sons, Incorporated, John, 2022.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Robustesse en mode DC"

Wu, Keng C. "Current Mode Control." In Pulse Width Modulated DC-DC Converters, 165–83. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6021-0_12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Batarseh, Issa, and Ahmad Harb. "Isolated Switch-Mode DC-DC Converters." In Power Electronics, 273–345. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68366-9_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wu, Keng C. "Flyback Converter in Discontinuous Conduction Mode." In Pulse Width Modulated DC-DC Converters, 127–49. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6021-0_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wu, Keng C. "Boost Converter in Continuous Conduction Mode." In Pulse Width Modulated DC-DC Converters, 150–62. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6021-0_11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Batarseh, Issa, and Ahmad Harb. "Non-isolated Switch Mode DC-DC Converters." In Power Electronics, 173–271. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68366-9_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wu, Keng C. "Simulation of Flyback Converter with Current Mode Control." In Pulse Width Modulated DC-DC Converters, 208–16. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6021-0_14.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Jianxing, Yabin Gao, Yunfei Yin, Jiahui Wang, Wensheng Luo, and Guanghui Sun. "Sliding Mode Control of DC/DC Power Converters." In Sliding Mode Control Methodology in the Applications of Industrial Power Systems, 157–84. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30655-7_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chiu, Chian-Song, Ya-Ting Lee, and Chih-Wei Yang. "Terminal Sliding Mode Control of DC-DC Buck Converter." In Communications in Computer and Information Science, 79–86. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-10741-2_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kislovski, André S., Richard Redl, and Nathan O. Sokal. "Introduction to the Injected-Absorbed-Current Method of Analysis." In Dynamic Analysis of Switching-Mode DC/DC Converters, 5–17. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-7849-5_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kislovski, André S., Richard Redl, and Nathan O. Sokal. "Interconnection of a Power Source and a Switching Regulator." In Dynamic Analysis of Switching-Mode DC/DC Converters, 245–63. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-7849-5_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Robustesse en mode DC"

Kadlimatti, Venkatesh G., Aniruddha Periyapatna Nagendra, M. Ankitha, and Harikrishna Parthasarathy. "Continuous Conduction Mode in Digital Control Loop of DC-DC." In 2024 IEEE 37th International System-on-Chip Conference (SOCC), 138–42. IEEE, 2024. http://dx.doi.org/10.1109/socc62300.2024.10737747.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Xu, Fachao, and Jingjing Xiong. "Adaptive Sliding Mode Voltage Control of DC/DC Buck Converters." In 2024 3rd International Conference on Service Robotics (ICoSR), 159–62. IEEE, 2024. https://doi.org/10.1109/icosr63848.2024.00041.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cavallo, Alberto, and Beniamino Guida. "Sliding mode control for DC/DC converters." In 2012 IEEE 51st Annual Conference on Decision and Control (CDC). IEEE, 2012. http://dx.doi.org/10.1109/cdc.2012.6427026.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Nandankar, Praful V., and Jyoti P. Rothe. "Highly efficient discontinuous mode interleaved dc-dc converter." In 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT). IEEE, 2016. http://dx.doi.org/10.1109/iceeot.2016.7755615.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mousavi, Alireza, Esmaeel Khanmirza, and Milad Nazarahari. "Intelligent identification of switch-mode DC-DC converters." In 2015 3rd RSI International Conference on Robotics and Mechatronics (ICROM). IEEE, 2015. http://dx.doi.org/10.1109/icrom.2015.7367753.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hongmei Li and Xiao Ye. "Sliding-mode PID control of DC-DC converter." In 2010 5th IEEE Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2010. http://dx.doi.org/10.1109/iciea.2010.5516952.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Moreira, Carlos, and Marcelino Santos. "Implicit current DC-DC Digital Voltage-Mode Control." In 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE). IEEE, 2014. http://dx.doi.org/10.1109/isie.2014.6864815.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Larrea, Inigo, and Sridhar Seshagiri. "Voltage mode SMC of DC-DC buck converters." In 2016 IEEE 25th International Symposium on Industrial Electronics (ISIE). IEEE, 2016. http://dx.doi.org/10.1109/isie.2016.7744946.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Feng Ma and Lei Li. "Differential DC-DC converter mode three-level inverters." In 2012 7th International Power Electronics and Motion Control Conference (IPEMC 2012). IEEE, 2012. http://dx.doi.org/10.1109/ipemc.2012.6259061.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Heras-Cervantes, Mario, J. Anzurez-Marin, E. Espinosa-Juarez, A. C. Tellez-Anguiano, and M. C. Garcia-Ramirez. "Sliding Mode Fuzzy Observer for DC-DC Converters." In 2018 IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC). IEEE, 2018. http://dx.doi.org/10.1109/ropec.2018.8661421.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Robustesse en mode DC"

Anderson, T., and S. Steffann. Stateless IP/ICMP Translation for IPv6 Internet Data Center Environments (SIIT-DC): Dual Translation Mode. RFC Editor, February 2016. http://dx.doi.org/10.17487/rfc7756.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lawler, J. S. Extended Constant Power Speed Range of the Brushless DC Motor Through Dual Mode Inverter Control. Office of Scientific and Technical Information (OSTI), June 2000. http://dx.doi.org/10.2172/815164.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!