Готові списки джерел за темами / Redresseur de type buck

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій

Добірка наукової літератури з теми "Redresseur de type buck"

Автор: Grafiati
Опубліковано: 22 жовтня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Redresseur de type buck".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Redresseur de type buck"

1

Axelrod, B., Y. Berkovich, S. Tapuchi, and A. Ioinovici. "Single-Stage Single-Switch Switched-Capacitor Buck/Buck-Boost-Type Converter." IEEE Transactions on Aerospace and Electronic Systems 45, no. 2 (April 2009): 419–30. http://dx.doi.org/10.1109/taes.2009.5089531.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mwinyiwiwa, B. M. M., P. M. Birks, and B. T. Ooi. "Delta-modulated buck-type PWM converter." IEEE Transactions on Industry Applications 28, no. 3 (1992): 552–57. http://dx.doi.org/10.1109/28.137435.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Funabiki, Shigeyuki, Ryoji Haruna, and Toshihiko Tanaka. "A Buck-Boost Type Grid-Connected Inverter." IEEJ Transactions on Industry Applications 123, no. 10 (2003): 1234–35. http://dx.doi.org/10.1541/ieejias.123.1234.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Alhaqeem, Mohammed Abdul Aziz, and Aswardi Aswardi. "Human Machine Interface Visual Basic Arduino untuk DC – DC converter Type Buck." JTEIN: Jurnal Teknik Elektro Indonesia 2, no. 2 (July 17, 2021): 148–54. http://dx.doi.org/10.24036/jtein.v2i2.126.

Повний текст джерела
Анотація:
Pada era teknologi yang semakin berkembang pesat, penggunaan elektronika daya semakin banyak digunakan seperti untuk penggontrolan motor dan lain – lain. Untuk mendukung semua itu tentu juga di iringi dengan metode – metode interfacing yang memudahkan user dalam penggunaaan alat – alat elektronika daya seperti contohnya buck conveter. Interfacing yang di maksud disini adalah dengan melakukan pengaturan keluaran buck converter dengan menggunakan interfacing pada personal computer sekaligus memonitoringnya. Buck converter adalah jenis dc-dc converter yang berfungsi untuk mengubah keluaran tegangan output lebh kecil dibandingkan dengan tegangan keluaran input. Perancangan monitoring menggunakan visual basic dalam pembuatan interfacing, hal ini dilakukan karena kemudahan komunikasi antara visual basic dengan arduino. Metode pengontrolan menggunakan pengaturan duty cycle yang diberikan dari visual basic ke arduino. Dengan mengatur duty cycle, maka tegangan yang dkeluarkan pun akan berubah-ubah. Berdasarkan hasil pengujiaan, maka dengan memperbesar duty cycle maka keluaran tegangan dari buck converter akan semakin kecil, Dengan hasil pengukuran buck converter pada input tegangan 24 volt dan duty 15.97 menghasilkan tegangan keluaran sebesar 19,5 sedangkan pada duty cycle 34.57 menghasilkan tegangan sebesar 13.9.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Wu, Weimin, Junhao Ji, and Frede Blaabjerg. "Aalborg Inverter - A New Type of “Buck in Buck, Boost in Boost” Grid-Tied Inverter." IEEE Transactions on Power Electronics 30, no. 9 (September 2015): 4784–93. http://dx.doi.org/10.1109/tpel.2014.2363566.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

HIDAYAT, Nabil M., Masaaki NAKAMURA, Yoshito KATO, and Yoshio ITOH. "Electronic Ballast Using Neutral Point Type Buck Converter." Journal of Light & Visual Environment 35, no. 2 (2011): 136–41. http://dx.doi.org/10.2150/jlve.35.136.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hirachi, K., and M. Nakaoka. "Improved control strategy on buck-type PFC converter." Electronics Letters 34, no. 12 (1998): 1162. http://dx.doi.org/10.1049/el:19980901.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Chang, Chien-Hsuan, Hung-Liang Cheng, and En-Chih Chang. "Using the buck-interleaved buck–boost converter to implement a step-up/down inverter." Engineering Computations 34, no. 2 (April 18, 2017): 272–84. http://dx.doi.org/10.1108/ec-08-2015-0241.

Повний текст джерела
Анотація:
Purpose A typical photovoltaic grid-connection power system usually consists of multi-stage converters to perform multiple functions simultaneously. To simplify system configuration, reduce cost and improve conversion efficiency, this paper aims to develop a buck–boost-type inverter. The proposed inverter has both step-up and step-down functions, so that it is suitable for applications with wide voltage variation. As only one power switch operates with high frequency at one time, switching losses can significantly be reduced. Design/methodology/approach A step-up/down inverter is developed by adopting a buck-interleaved buck–boost (BuIBB) DC-DC converter and connecting with an H-bridge unfolding circuit with line-commutated operation. Finding The proposed circuit can work functionally as either a buck-type or boost-type inverter, so that partial energy can be directly delivered to output to improve efficiency. The input current is shared by two inductors, leading to the reduction of current stresses. Research limitations/implications To apply the proposed inverter to micro-inverter applications in the future, developing a step-up/down inverter with a higher conversion ratio will be considered. Practical implications A laboratory prototype is built accordingly to verify the feasibility of the proposed inverter. The experimental results are presented to show the effectiveness. Originality/value This paper proposes a step-up/down inverter by using the BuIBB converter, which is innovatively studied.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Shao, Zhu Lei. "Study on Buck-Boost Integrated Type Three-Port Converter." Advanced Materials Research 960-961 (June 2014): 1304–7. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.1304.

Повний текст джерела
Анотація:
Aiming at simplifying the structure of power supply system of new energy, a buck-boost integrated type three-port converter is designed in this paper. The three-port converter can replace three separate converters, which makes the system structure is simplified and manufacturing cost is reduced. The three-port converter realizes the current expansion and ripple suppression by adopting inductor interleaved parallel bridge arm structure. The topology and control strategy of the three-port converter are analyzed in this paper. From the experimental results, the inductor current ripple and realization of soft switch meet the design requirement. The buck-boost integrated type three-port converter is applicable to the new energy power supply system.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

B, Nagi Reddy, O. Chandra Sekhar, and M. Ramamoorty. "Implementation of zero current switch turn-ON based buck-boost-buck type rectifier for low power applications." International Journal of Electronics 106, no. 8 (March 20, 2019): 1164–83. http://dx.doi.org/10.1080/00207217.2019.1582711.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Redresseur de type buck"

1

Combe, Quentin. "Éjection électromagnétique : modèle et réalisation." Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0107.

Повний текст джерела
Анотація:
Cette thèse se concentre sur la thématique de l'éjection électromagnétique appliquée dans le cadre de l'industrie du recyclage des métaux. L'objectif de celle-ci est la modélisation et la réalisation d'une architecture de conversion d'énergie permettant la réalisation de cette éjection. Le champ magnétique variable généré est utilisé afin de séparer d'un flux de déchets les matériaux métalliques non ferromagnétique tel que l'aluminium ou le cuivre par le biais d'une force de Laplace engendrée par la conjonction entre le champ magnétique crée et le champ magnétique induit par les courants de Foucault dans les matériaux conducteurs. L'architecture développée se compose de plusieurs éléments: un redresseur, un onduleur et un inducteur. La partie redresseur, à large plage de fonctionnement connectée sur le réseau d'alimentation triphasée permet d'obtenir une tension continu réglable et assure un prélèvement sinusoïdale de courant en phase avec la tension. La partie onduleur, permet de contrôler la puissance transmise, en adaptant l'amplitude et la fréquence du courant traversant la dernière partie du système que forme l'inducteur, responsable de la création du champ magnétique alternatif. Le choix du redresseur s'est porté sur la structure classique du redresseur abaisseur de tension de type Buck en raison de la faible impédance de l'inducteur utilisé. Bien que cette structure permette d'abaisser la tension triphasée, sa plage de fonctionnement peut être facilement augmentée sans l'ajout de composant passif. Le contrôle classique de ce redresseur ne se base que sur ses grandeurs de sorties ce qui peut engendrer des oscillations non contrôlées causées par la mise en résonance du filtre LC d'entrée excité par les harmoniques générés par les commutations des transistors. Nous avons proposé dans cette thèse une nouvelle méthode de contrôle qui traite à la fois de ses grandeurs d'entrée et de sortie et qui permet de contrôler les éventuelles oscillations du filtre LC d'entrée tout en bénéficiant d'une meilleure réponse dynamique lorsque le système est soumis à un échelon de charge. Cette méthode de contrôle se base sur les propriétés de platitude des systèmes différentielles, ainsi elle ne dépend pas du point de fonctionnement et garantit la stabilité large signal du système. Le choix de l'onduleur monophasé s'est porté sur une structure en pont complet permettant l'application de trois niveaux de tension et un large choix de contrôle de l'amplitude, de la forme et de la fréquence du courant traversant l'inducteur. Différents contrôle de ce convertisseur ont été étudiés et comparés. Ceux-ci permettent de faire varier la puissance injectée dans l'inducteur, ont un impact sur le contenu harmonique du courant le traversant et sur les contraintes des différents composants du système. Une modélisation de l'inducteur ainsi qu'une estimation de la valeur du champ magnétique nécessaire à l'éjection est effectuée. Les différentes méthodes proposées sont validées par des résultats de simulations numérique mais également par le biais de tests expérimentaux réalisés sur le système complet
This thesis focuses on the subject of electromagnetic ejection applied in the context of the metal recycling industry. The aim of this thesis is the modeling and the development of an architecture of energy conversion allowing the realization of this ejection. The generated variable magnetic field is used to separate non-ferromagnetic metallic materials such as aluminum or copper from a waste stream by means of a Laplace force generated by the conjunction between the magnetic field created and the magnetic field induced by the eddy currents in the conductive materials.The developed architecture is composed of several elements: a rectifier, an inverter and an inductor. The rectifier part with a wide operating range connected to the three-phase grid network allows to obtain an adjustable DC voltage and ensures a sinusoidal current in phase with the voltage. The inverter part allows to control the transferred power, by adjusting the amplitude and frequency of the current flowing through the last part of the system represented by the inductor, responsible for the generation of the variable magnetic field.The rectifier is based on the classical Buck rectifier structure because of the low impedance of the inductor used. Although this structure allows to lower the three-phase grid voltage, its operating range can be easily increased without the addition of passive components. The classical control of this rectifier is based only on its output variables which can lead to uncontrolled oscillations caused by the resonance of the lightly damped input LC filter excited by the harmonics generated by the switching of transistors. In this thesis, we proposed a new control method that deals with both its input and output variables and that allows both to control the oscillations of the input LC filter while obtaining a better dynamic response when the system is subjected to a load step. This control method is based on the flatness properties of differential systems, so it does not depend on the operating point and guarantees the large signal stability of the system.The single-phase inverter is based on a full bridge structure allowing the application of three voltage levels and a wide choice of control of the amplitude, shape and frequency of the current flowing through the inductor. Different controls of this converter have been studied and compared. These allow to vary the power injected in the inductor, have an impact on the harmonic content of the current flowing through it and on the constraints of the different components of the system.A modeling of the inductor as well as an estimation of the value of the magnetic field necessary for the ejection is carried out. The different methods proposed are verified by numerical simulations but also by experimental tests performed on the whole system
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mwinyiwiwa, Bakari M. M. "Construction and test of a delta modulated buck type 3 phase converter." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=55629.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ahmad, Khan Mumtaz, and Bahman Alidad. "Three Variable Analogue of Boas and Buck Type Generating Functions and Its Generalizations to M-Variables." Pontificia Universidad Católica del Perú, 2014. http://repositorio.pucp.edu.pe/index/handle/123456789/97282.

Повний текст джерела
Анотація:
The present papers deals with three variable analogue of Boas and Buck [14] type generating functions forpolynomials of two variables and then the same has been extended for m-variable analogue. The results obtained are extensions of those obtained by us in our earlier paper [14].
El presente artículo trata el anólogo de tres variables de la función generatriz de Boas and Buck [14] para polinomios de dos variables y lo mismo se puede extender para el análogo de m variables. Los resultados obtenidos son extensiones de un artículo previo [14].
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Marsala, Giuseppe. "Modélisation et réalisation d'un émulateur de système de piles à combustibles : développement des stratégies et des lois de commande." Besançon, 2008. http://www.theses.fr/2008BESA2036.

Повний текст джерела
Анотація:
Le sujet de la thèse traite de la modélisation d’un système d’énergie avec piles à combustibles (PàC) de type PEMFC destiné à être intégré dans les véhicules électriques. Le but recherché par la réalisation de cet émulateur (objet matériel qui a le même comportement qu’un système réel) est de développer des lois de commande assurant un bon fonctionnement du système PàC. Après une étude bibliographique sur les différentes modélisations de cœur de Pile à Combustible (PàC), le choix d’un convertisseur de type Buck a été retenu et mis en œuvre pour l’émulateur. L’originalité de ce travail réside dans la prise en compte de toutes les auxiliaires du système PàC. Les auxiliaires ont été introduites sous forme Hardware In the Loop (HIL). Pour cela l’environnement DSPACE a été utilisé. Plusieurs lois de commande et de contrôle ont été étudiées et mises en œuvre. L’émulateur a été conçu avec une large bande passante. Le contrôle de la tension est réalisé avec la technique « State Variable Feedback », qui est capable de fixer correctement les pôles du système à boucle-fermé afin d’assurer la bande passante souhaité et le comportement à régime permanent. Le cas particulier de la gestion de l’air a été largement développé et a permis de valider le principe d’émulation retenu. En effet, différentes stratégies de commande (static feedforward, PI) ont été étudiées et comparées en utilisant une nouvelle stratégie de commande basée sur les réseaux neuronaux. Cette dernière repose sur le principe d’inversion de la relation entre la vitesse de rotation du compresseur et le coefficient de « oxygen excess ratio », dont la régulation est d’importance capitale pour éviter l’appauvrissement en oxygène de la membrane
This thesis deals with modelling of a PEM-Fuel Cell System (FCS) for power generation in an electrical vehicle. The goal of the research is the construction of an emulator of the PEM Fuel Cell stack, that of a device having the same behaviour as the real system, and the development of command strategies for the FCS. After a bibliographical study of the models of Fuel Cell stack, a buck converter structure has been chosen and then implemented to build the emulator. The novelty of this thesis is that all the auxiliary components of a FCS have been considered in a Hardware In the Loop (HIL) fashion by using a DSPACE development platform. Several command strategies have been implemented and assessed by using the emulator, which has been designed with a high bandwidth. The voltage control of the emulator has been accomplished by using the “State Variable Feedback”, which is a pole-placement technique for achieving the desired bandwidth and dynamical and steady-state performance. The particular case of control of the air-management system has been considered and used to asses the emulator. Actually several control strategies (static feedforward, PI) have been studied and their results compared also by using a novel neural network based command strategy. This neural network implements the inversion of the relationship between the compressor speed and the “oxygen excess ratio”, whose regulation is a key issue for preventing the oxygen starvation of the membrane
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Po-YenLin and 林柏言. "Buck-Type Wide-Range Dimmable LED Driver." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/5r2xn5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Lin, Chih-Ju, and 林志儒. "Non-Isolated Buck-Type Converter with Soft Switching." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/ktp547.

Повний текст джерела
Анотація:
碩士
國立臺北科技大學
電力電子產業研發碩士專班
96
In this thesis, a non-isolated buck-type converter, together with half resonance and zero voltage transition to achieve zero current switching and zero voltage switching, is presented, in which the source terminal of the MOSFET switch is connected to the ground so as to make this switch easy to drive. In addition, the pulse width modulation (PWM) control technique is utilized in this converter so as to render the required output filter easy to design. By doing so, the problems in the electromagnetic interference (EMI) and power dissipation are reduced and hence the efficiency of this converter is upgraded. In this thesis, the theoretical derivation is firstly introduced, and secondly the simulated and experimental results are provided to demonstrate the effectiveness of the proposed topology.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Lee, Fong-Cyuan, and 李豐銓. "Integrated Buck Type of MICs for Multiple Input Sources." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/74b4e6.

Повний текст джерела
Анотація:
碩士
國立臺北科技大學
電機工程系所
102
The thesis will present a converter with multiple sources for energy harvest of internal combustion engine vehicle. The energy sources include solar panel, regeneration energy during braking and thermal electrical generator. Since these three energy sources have different power rating, a power distribution control method is proposed in this thesis. The proposed power distribution control method can effectively implement power distribution while three input sources operate in the MICs at the same time. The second function is mode switching method. MICs is required to use Thermo-Electrical Generator for main energy source. As output power need is more than TEG standard, mode switching method can operate MICs back to breaking recharge system, and posses power distribution function. The specifications of the converter include: input voltage ranging extends from 16 V to 60 V, output power is around 1.32 kW and output voltage is 12 V. The three-phase control signals are with interleaved control to reduce the output voltage ripple. According to the simulation and the result of experiment, MICs can implement power distribution base on different load needs. When it is full load, output voltage ripple is smaller than 1%, and full load efficiency can achieve 90.08%. Besides, when MICs implement switching-mode technology, the system can effectively operate extra input source according to load needs, or part the input source from system.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Jian, Jhen-Yu, and 簡振宇. "Charging Scenario for Serial Buck-Boost Type Battery Power Modules." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/57629112434006299081.

Повний текст джерела
Анотація:
碩士
國立中山大學
電機工程學系研究所
101
Battery power modules (BPMs) with bidirectional buck-boost converters, which are connected in series, are operated interactively but substantially can be controlled individually for either charging or discharging. During the charging process, the battery currents can be scheduled by adjusting the duty-ratios of the associated buck-boost converters. To fully utilize the charger’s capacity, several charging scenarios are proposed according to the state of charges (SOCs) of the batteries under the limitations of the charger’s power and current. To demonstrate the feasibility and capability of the charging scenarios, a battery power system formed by 4 serial buck-boost type BPMs is built and tested. A microcontroller is used for estimating the battery SOCs, and then scheduling the battery currents accordingly. Experimental results show the effectiveness of the charging scenarios.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Hsu, Wei-Ting, and 徐瑋廷. "Fast-Transient-Response Buck Converter with Split-Type III Compensation." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/49335v.

Повний текст джерела
Анотація:
碩士
國立臺北科技大學
電腦與通訊研究所
101
The first part of this thesis is a Split-Type III (ST3) compensation technique for CMOS DC-DC buck converter with 91.2% efficiency. The proposed compensation not only provides the fast transient response as the conventional Type III compensator, but also reduces area and power consumption of passive components. The buck converter combines current signals of bandpass filter and ramp generator for the input of pulse width modulation (PWM). The proposed buck converter has been fabricated with a TSMC 0.35-μm CMOS 2P4M process. This design is based on the 1MHz operating frequency with the inductor of 4.7 μH and the capacitor of 10 μF to reduce switching loss. Measurement results shows that the settling time of the converter is less than 5 μs for a load current step of 200 mA. Peak efficiency of 91.2% is obtained at 150 mA load current. The next part of this thesis introduces a Split-Type III (ST3) compensation technique and a charge-pump circuit method for CMOS DC-DC buck converter with fast transient response and high efficiency. The proposed buck converter has been fabricated with a TSMC 0.35-μm CMOS 2P4M process. The operating frequency of proposed converter is 1 MHz. The buck converter with ST3 compensator and the ramp generator using Schmitt-trigger circuit can reduce chip area, power consumption and circuit complexity. Measurement results shows that the settling time of the converter output is less than 2 μs for a load current step of 200 mA. The buck converter can offer a stable output voltage between 1.0V to 2.5V. Finally, the efficiency of the buck converter can stay above 80% in 50 to 400 mA load; peak efficiency of 90.8% is obtained at 100 mA load current.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

楊盛雄. "Research and Design of Buck Type Converters with Varibale Output Voltage." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/99145952612986194961.

Повний текст джерела
Анотація:
碩士
明新科技大學
電機工程研究所
94
In general, the switching power supplies of electronic products have constantoutput, but in order to satisfy all-around power requirements, research and design of the converter with variable output is necessary. In this thesis, the author uses the familiar converter Buck converter as the research sample. The content includes analysis of the Buck converter; derivation of small signal model, and design of closed-loop controller. From the small signal model, the open-loop frequency response of converter system by using Bode plots can be obtained. Furthermore, the theory of control system was applied to design a closed-loop controller for increasing stability of the whole system. Finally, one high power Buck converter has been made. The whole circuit design procedures and the entity's data measure have been described. The variable output voltage function has been accomplished by using a linear adder. Simulation and experimental results are shown and compared to verify the feasibility of the converter.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Redresseur de type buck"

1

Rehder, Ben. Buck fever. New York: St. Martin's Minotaur, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mulford, Clarence Edward. Buck Peters, ranchman. Thorndike, Maine: Center Point Large Print, 2013.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Clark, Mindy Starns. The buck stops here. Eugene, Or: Harvest House Publishers, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

The buck stops here. Waterville, Me: Thorndike Press, 2005.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mcdonald, Gregory. The buck passes Flynn. New York: Vintage Crime/Black Lizard, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Rehder, Ben. Buck fever: A Blanco County, Texas novel. New York: St. Martin's Minotaur, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Rehder, Ben. Buck fever: A Blanco County, Texas novel. Waterville, Me: Thorndike Press, 2003.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Buck, Pearl S. Chuyuen Kinh Thánh / Pearl Buck ; Nguynen Ưwoc chuyten ngzu. Toronto, Ontario: Nguson Srong, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Raine, William MacLeod. Riders of Buck River. 2014.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Rehder, Ben. Buck Fever. Tandem Library, 2003.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Redresseur de type buck"

1

Agrawal, P. N., and Sompal Singh. "Approximation by Szász–Kantorovich-Type Operators Involving Boas–Buck-Type Polynomials." In Lecture Notes in Electrical Engineering, 337–61. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1824-7_23.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Loureiro, Ana F., and S. Yakubovich. "On Especial Cases of Boas-Buck-Type Polynomial Sequences." In Analytic Number Theory, Approximation Theory, and Special Functions, 705–20. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0258-3_26.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kumar, Abhishek, Durgesh Chandra Nautiyal, and Prakash Dwivedi. "Closed Loop Control of Non-ideal Buck Converter with Type-III Compensator." In Control Applications in Modern Power System, 1–13. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8815-0_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Mehta, Axaykumar, and Brijesh Naik. "Sliding Mode Controller with PI-Type Sliding Function for DC–DC Buck Converter." In Sliding Mode Controllers for Power Electronic Converters, 21–43. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-3152-7_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Saurav, S., and Arnab Ghosh. "Switched Mode Fourth-Order Buck–Boost Converter Using Type II and Type III Controllers in DC Grid Applications." In Energy Systems in Electrical Engineering, 383–403. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-4388-0_21.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sadda, Arpit, Jay Prakash Keshri, Harpal Tiwari, and Vishal Jain. "BLDC Motor Torque Ripple Minimization Technique by Using Isolated Type DC–DC Buck–Boost Converter." In Lecture Notes in Electrical Engineering, 301–12. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1476-7_29.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zhang, Yunhao, Xiaonan Xia, Xiaoxing Ge, Wei Tang, and Yu Fang. "Design of Multi-port Energy Conversion System of Electric Vehicle Based on Bridge-Type Buck-Boost Topology." In Lecture Notes in Electrical Engineering, 446–54. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8450-3_48.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

"Buck-Type Integrated Topologies." In Integrated Power Electronic Converters and Digital Control, 71–80. CRC Press, 2017. http://dx.doi.org/10.1201/9781439800706-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

"Buck-Type Integrated Topologie." In Power Electronics and Applications Series, 71–80. CRC Press, 2009. http://dx.doi.org/10.1201/9781439800706.ch6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

"Buck-Boost Type Integrated Topologies." In Integrated Power Electronic Converters and Digital Control, 81–92. CRC Press, 2017. http://dx.doi.org/10.1201/9781439800706-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Redresseur de type buck"

1

Park, Sang-Hyun, Tae-Sung Kim, Jin-Sik Park, Gun-Woo Moon, and Myung-Joong Yoon. "A New Buck-boost Type Battery Equalizer." In 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2009. http://dx.doi.org/10.1109/apec.2009.4802823.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lin, Bor-Ren, Chau-Shing Wang, Jyun-Ji Chen, and Kun-Liang Shih. "Interleaved PWM active-clamping buck-type converter." In 2010 International Power Electronics Conference (IPEC - Sapporo). IEEE, 2010. http://dx.doi.org/10.1109/ipec.2010.5543843.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lin, Po-Yen, Tsorng-Juu Liang, Che-Wei Chang, Kai-Hui Chen, and Bin-Kun Huang. "Buck-type wide-range dimmable LED driver." In 2017 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2017. http://dx.doi.org/10.1109/apec.2017.7930907.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Lee, C. R., W. T. Tsai, and H. S. Chung. "A buck-type power-factor-correction circuit." In 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS 2013). IEEE, 2013. http://dx.doi.org/10.1109/peds.2013.6527087.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zhang, Shao, and K. J. Tseng. "One-cycle controlled three-switch buck-type rectifier." In 2011 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2011. http://dx.doi.org/10.1109/ecce.2011.6063937.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Huayun, Wang, Chen Xue fen, Li Qiong, Zhang Cuijie, Liu Bin, and Jiang Yiheng. "A Novel Three-phase Buck-Type PFC Converter." In 2018 Chinese Automation Congress (CAC). IEEE, 2018. http://dx.doi.org/10.1109/cac.2018.8623773.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Moschopoulos, Gerry, and Yongqiang Zheng. "Buck-Boost Type Ac-Dc Single-Stage Converters." In 2006 IEEE International Symposium on Industrial Electronics. IEEE, 2006. http://dx.doi.org/10.1109/isie.2006.295794.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ramos, Gustavo A., Miguel E. Hernandez, and Manuel D. Trujillo. "Function test by HIL for DC-DC converters type: Buck, boost and buck-boost." In 2017 IEEE Workshop on Power Electronics and Power Quality Applications (PEPQA). IEEE, 2017. http://dx.doi.org/10.1109/pepqa.2017.7981647.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Abdeen, Eltaib, Mahmoud A. Gaafar, Mohamed Orabi, and Masahito Shoyama. "Three Level T-Type Buck-Boost Voltage Source Inverter." In 2019 IEEE Conference on Power Electronics and Renewable Energy (CPERE). IEEE, 2019. http://dx.doi.org/10.1109/cpere45374.2019.8980233.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Khan, Ashraf Ali, Honnyong Cha, and Hafiz Furqan Ahmed. "High efficiency buck and boost type AC-AC converters." In 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe). IEEE, 2015. http://dx.doi.org/10.1109/epe.2015.7309136.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Redresseur de type buck" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії