Добірка наукової літератури з теми "Recyclage des plastiques"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Recyclage des plastiques".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Recyclage des plastiques":
Ndepete, Cyrille Prosper, Raoul Zaguy-Guerembo, Aime Martinien Deganai Gbongo, Luce Marie-Paul Regakouzou, Victoire Olivia Ngaissona Namndouta, and José Kpeou-Kolengue. "Valorisation des déchets plastiques en matériaux de construction." European Scientific Journal, ESJ 18, no. 21 (June 30, 2022): 320. http://dx.doi.org/10.19044/esj.2022.v18n21p320.
Benimam, Samir, Farid Debieb, Mohamed Bentchikou, and Mohamed Guendouz. "Valorisation et Recyclage des Déchets Plastiques dans le Béton." MATEC Web of Conferences 11 (2014): 01033. http://dx.doi.org/10.1051/matecconf/20141101033.
Del Bono, Anaïs, Walid Addar, Myriam Ertz, Emmanuel Raufflet, and Mahdi Takkafoli. "recyclage des plastiques au Canada : un système inadapté aux attentes de la population canadienne." Revue Organisations & territoires 32, no. 3 (January 15, 2024): 222–25. http://dx.doi.org/10.1522/revueot.v32n3.1687.
Deweerdt, Sarah. "Quel avenir pour le recyclage du plastique ?" Pour la Science N° 547 – mai, no. 5 (May 2, 2023): 34–41. http://dx.doi.org/10.3917/pls.547.0034.
Jesus, Samuel de. "Les recyclages sonores du monde : les immersions sono-plastiques selon Chelpa Ferro et Nuno Ramos." Figures de l'Art. Revue d'études esthétiques 26, no. 1 (2014): 481–92. http://dx.doi.org/10.3406/fdart.2014.1657.
Abelim, Passoli, Badaba Valerie Leleng Peacequeen, Banakinao Sinko, and Ayite Yawovi Mawuenya Xolali Dany. "INFLUENCE DU PLASTIQUE RECYCLE DE TYPE POLYPROPYLENE SUR LES CARACTERISTIQUES DU BITUME ET DE LENROBE BITUMINEUX." International Journal of Advanced Research 12, no. 02 (February 29, 2024): 470–87. http://dx.doi.org/10.21474/ijar01/18319.
RECORD, Association, Erwan HARSCOET, and Sarah CHOUVENC. "Recyclage chimique et physicochimique des déchets plastiques." Chimie verte, September 2023. http://dx.doi.org/10.51257/a-v1-j3995.
Lentin, Jean-Michel, Maurice Mazza, and André Thouzeau. "Recyclage, par extrusion BIVIS de déchets plastiques mélangés issus des ordures ménagères." Déchets, sciences et techniques, no. 09 (1998). http://dx.doi.org/10.4267/dechets-sciences-techniques.856.
Amadji, Togbé Armel, Gerard Jean, Adjovi Codjo, Guibal Daniel, and Doko Kouandété Valéry. "VALORISATION DE DECHETS PLASTIQUES ET D'INDUSTRIE DU BOIS EN COMPOSITE MOULE A FROID : EFFET DES PARAMETRES DE FABRICATION SUR LES PROPRIETES MECANIQUES." Environnement, Ingénierie & Développement Unlabeled volume (February 23, 2021). http://dx.doi.org/10.46298/eid.2021.7210.
Дисертації з теми "Recyclage des plastiques":
Lamolle, Vincent. "Etude de cisaillement intense de plastiques mélangés en vue d'applications au recyclage." Aix-Marseille 1, 2002. http://www.theses.fr/2002AIX11068.
Godin, Marie-Christine. "Valorisation de plastiques recyclés en provenance des centres de tri." Thesis, Université Laval, 2013. http://www.theses.ulaval.ca/2013/29740/29740.pdf.
Chiarilli-Sabin, Virginie. "Analyse de seuils d'endommagement de mélanges de polymères incompatibles dans un objectif de recyclage." Lille 1, 1996. https://pepite-depot.univ-lille.fr/LIBRE/Th_Num/1996/50376-1996-272.pdf.
C'est le cas pour le polyoxyméthylène, et également pour un matériau pourtant très différent des thermoplastiques : le carbonate de calcium. Ce taux de 5% en volume semble marquer une transition de type ductile-fragile observée lors de la sollicitation en traction. La sensibilité particulière des caractéristiques autour de ce taux, la proximité de la température de transition vitreuse du polypropylène et la modification de la mobilité moléculaire due à la compatibilisation expliquent les valeurs a priori surprenantes mesurées sur certains allongements à la rupture. De plus, il est intéressant de constater que, contrairement à ce que l'on lit dans la littérature concernant les mélanges équilibrés de polymères incompatibles, l'adjonction de compatibilisants n'est pas nécessaire. Cette différence de tendance s'explique par la conjonction des facteurs que l'on vient d'évoquer, sans laquelle cette transition ductile-fragile, différente de la transition vitreuse, n'aurait pas été mise en évidence
Achtioui, Touria. "Mise en œuvre et caractérisation de matériaux polymères issus d' emballages plastiques recyclés." Thesis, Reims, 2014. http://www.theses.fr/2014REIMS036.
The aim of this PhD thesis was to understand the mechanisms of degradation of SAN and ABS from waste sprues and undelivered packages from Albea Group (formerly known as Alcan Packaging). The results of this project should allow the reduction of waste volume, the improvement of material properties and a costs reduction. The present workshould also improve the understanding of the fundamental aspects of physical recyclability of polymers during different cycles in injection molding.The first part of the study performed using an internal mixer showed how degradation was influenced by processing parameters such as the rotor speed, the temperature and the mixing time. Thus, considering the SAN, the mechanisms of the thermo-mechanical degradation are both generated by the thermo-mechanical degradation and by the oxidation that involves chain scissions. In the case of ABS, its mechanisms of thermo-mechanical degradation imply further chromophores sites, several competition reactions such as crosslinking and chain scissions.The innovative feature of our work was to establish a theoretical mechanism of degradation of ABS and SAN under processing conditions used in industry thanks to our experimental approach with original investigation procedure (TMDSC, solid state NMR, AFM). Afterwards, we were then able to identify the real contribution on the one hand of the shearing effect, which seemed still unstudied in the literature, and of the other hand of the thermal effect.Finally, it was found that degradation was not affecting SAN mechanical properties whereas discoloration and a reduction of viscosity were observed. On the opposite, the recycling of ABS resulted in a significant reduction of tensile properties and the impact strength due to the presence of varnish which interfered in stress transfer between PB nodules and the SAN matrix
Boeglin, Nadia. "Valorisation par agglomération de sous-produits de la filière bois : faisabilité technique et approche technico-économique." Nancy 1, 1995. http://www.theses.fr/1995NAN10334.
Jacob-Vaillancourt, Colin. "Caractérisation avancée et valorisation des plastiques mélangés postconsommation : étude de cas chez Gaudreau Environnement inc." Master's thesis, Université Laval, 2018. http://hdl.handle.net/20.500.11794/28305.
Les plus récents estimés indiquent que seulement 32% des plastiques post-consommation (emballages, sacs et contenants) sont récupérés par la collecte sélective des matières recyclables au Québec, et une quantité probablement encore moindre est réellement recyclée. Pourtant, le recyclage a été identifié comme une des stratégies clés permettant la mise en place d’une véritable économie circulaire des plastiques. Présentement, un manque de données précises et transférables entre les acteurs de la chaîne de valeurs rend plus difficile l’application de mesures efficaces pour augmenter la qualité des plastiques voués au recyclage thermomécanique. De plus, il existe peu de solutions de recyclage pour les flux de plastiques fortement hétérogènes, alors que la diversité des emballages disponibles sur le marché est sans cesse croissante. Ce travail de recherche avait pour objectif d’étudier la qualité des plastiques mélangés en provenance du centre de tri de Gaudreau Environnement Inc., et de développer une technologie de recyclage applicable aux flux hétérogènes de plastiques. Une caractérisation combinant des équipements industriels et des analyses de laboratoire a permis de dégager un taux de qualité correspondant à la concentration réelle d’un polymère visé dans un échantillon trié par séparateur optique. De plus, la caractérisation des contaminants a démontré que les plastiques faits de polystyrène et de polyvinyle chloré sont sujets à de grandes variations de qualité. Une méthode de recyclage de ces plastiques est proposée ici, soit l’utilisation d’agrégats de plastiques recyclés comme substituts au sable pour des mélanges expérimentaux de béton. Le plastique a généré des bétons ayant une plus grande ténacité élastique et une résistance thermique plus élevée que le béton conventionnel. Cette technique de recyclage a semblé convenir aux flux hétérogènes de plastiques, notamment lorsque plusieurs types de polymères sont présents, car les critères de qualité diffèrent de ceux employés pour évaluer les plastiques voués au recyclage thermomécanique conventionnel.
According to recent estimates, only 32% of all postconsumer plastics are collected by curbside collection programs in the province of Quebec (CANADA), and an even smaller amount may be actually recycled into new products. Recycling has nonetheless been identified as one of the key strategies needed to enable a transition to a fully circular economy for plastics. At this time, a lack of precise data, transferable between all stakeholders of the plastics value chain, prevents the implementation of efficient measures to upgrade the quality of plastics channelled towards thermomechanical recycling. Also, very few recycling techniques are designed for heterogeneous plastic streams, while an increasingly varied array of plastic packaging is found on the consumer market. This research aimed to study the quality of a mixed plastics stream produced by Gaudreau Environnement Inc.’s material recovery facility, and develop a recycling technique able to process an heterogeneous plastic stream. A combination of industrial machineries and laboratory analyses was used to characterize the quality of the mixed plastics, and a quality index was generated to estimate the concentration of a targeted polymer in a sorted plastic stream. A characterization of contaminants showed that polystyrene and polyvinyl chloride streams experienced more variation in terms of quality for recycling. A potential valorization route was investigated, where recycled plastic aggregates were substituted to sand in experimental concrete blends. Plastic aggregates helped confer greater elastic toughness and a higher thermal resistance to concrete. Plastic aggregates with a high bulk density, such as those derived from PVC, generated concretes with the best mechanical performances. This recycling technique seems promising for heterogeneous plastic streams, particularly when several polymers are present, since its quality parameters differ from conventional thermomechanical recycling.
Le, Guern Cécile. "Séparation de déchets de plastiques par voie physico-chimique (flottation-moussage) en vue de leur recyclage : applicabilité au mélange PVC/PET bouteilles." Vandoeuvre-les-Nancy, INPL, 1997. http://docnum.univ-lorraine.fr/public/INPL_T_1997_LE_GUERN_C.pdf.
Călin, Laur Florentin. "Séparation électrostatique des matériaux plastiques provenant d'équipements informatiques en utilisant la triboélectrisation en lit fluidisé." Poitiers, 2008. http://www.theses.fr/2008POIT2279.
This work aimed at elaborating a process using triboelectrisation for charging plastic granules and electric field forces to separate them. After an introduction to the state of the, the author describes the two fluidised bed tribocharging devices and the two electrostatic separators that he built. The factors that influence the tribocharging of certain granular plastics (PVC, PET, ABS, PS) i. E. Duration of charging process, particle size, nature of the surfaces in contact, were evaluated using the design of experiments method. The influence of ambient temperature and humidity on charging binary mixtures of plastics was investigated using the same methodology. A numerical model of charged particle trajectories has been validated by experiments performed on granular mixtures of ABS, ABS-PC and HIPS. The experimental results confirm that tribocharging in a fluidised bed followed by electrostatic separation is an effective process for informatics equipment waste treatment
Maudet-Charbuillet, Carole. "Proposition d'outils et démarche pour l'intégration des filières de recyclage des matières plastiques dans la Supply Chain automobile." Paris, ENSAM, 2009. https://pastel.archives-ouvertes.fr/pastel-00005773.
Product end-of-life management must be considered in product design. To reach the European End-of-Life Vehicle (ELV) directive objectives and in view of the growing plastics' use in vehicles, the automotive Supply Chain must now set up reliable recovery scenarios for its products and therefore for these materials. The plastics industry, material technically unavoidable in our society, is subject to societal pressures, environ mental regulations. An answer to the se pressures is the development of recycling industries to save resources by making the waste a raw material. These networks are emerging systems whose development criteria must be defined. The automotive industry implemented many tools of design for recycling. But these tools do not take into account recycled plastics, that is to say the recycling networks characteristics, producers and suppliers don't see them as potential recycled material users. The limits of recycling networks' integration in the automotive Supply Chain find their origin in lack of knowledge on recycling industries characteristics by stakeholders involved in their development. We thus propose in this research a recycling networks' modelling tool - ODEFIRE- corresponding through network capabilities measures to a decision aid for stakeholders, including the Supply Chain Automotive. This aid concerns the implementation of the right actions to develop recycling industries. We also propose an approach for creating knowledge on recycling networks-DAIMRE-for automotive suppliers. This method authorizes, through the use of ODEFIRE, to promote the use of recycled plastics in high value parts. The aim is to sustain recycling industries integration in the automotive Supply Chain
Twite, Kabamba Eddy. "Polymer foams and composites recycling : Rheological and Macromolecular Investigations." Thesis, Université Laval, 2010. http://www.theses.ulaval.ca/2010/27578/27578.pdf.
Книги з теми "Recyclage des plastiques":
P, L'Hermite, Mettelet C, and Ferrero G. L, eds. Recovery of plastics waste =: Le recyclage des déchets de matières plastiques. Luxembourg: Commission of the European Communities, 1988.
Bonar, Veronica. Le plastique. Bonneuil-les-Eaux [France]: Montréal, 1998.
Paolo, La Mantia Francesco, ed. Recycling of plastic materials. Toronto: ChemTec Pub., 1993.
Chanda, Manas. Plastics Fabrication and Recycling. London: Taylor and Francis, 2008.
Hegberg, Bruce A. Mixed plastics recycling technology. Park Ridge, N.J., U.S.A: Noyes Data Corp., 1992.
Rasshofer, Werner. Automotive polyurethanes. Lancaster, Penn: Technomic Pub. Co., 2001.
Leidner, Jacob. Plastics Waste: Recovery of Economic Value (Plastics Engineering). Marcel Dekker Inc, 2004.
Niaounakis, Michael. Recycling of Flexible Plastic Packaging. Elsevier Science & Technology Books, 2019.
Forrest, Martin J. Recycling of Polyethylene Terephthalate. de Gruyter GmbH, Walter, 2019.
Forrest, Martin J. Recycling of Polyethylene Terephthalate. de Gruyter GmbH, Walter, 2019.
Частини книг з теми "Recyclage des plastiques":
SANTANDER TAPIA, Pavlo, Fabio CRUZ SANCHEZ, Hakim BOUDAOUD, and Mauricio CAMARGO. "Cadre d’évaluation holistique du recyclage distribué par l’impression 3D open source." In Le recyclage, enjeu pour l’économie circulaire, 191–218. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9162.ch8.
GAMBS, Pauline, Marie LEPAGE, and Hervé MUHR. "Récupération et recyclage des métaux contenus dans les DEEE." In Le recyclage, enjeu pour l’économie circulaire, 95–132. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9162.ch5.
Звіти організацій з теми "Recyclage des plastiques":
Melanie, Haupt, and Hellweg Stefanie. Synthèse du projet conjoint du PNR 70 «Gestion des déchets pour soutenir la transition énergétique (wastEturn)». Swiss National Science Foundation (SNSF), January 2020. http://dx.doi.org/10.46446/publication_pnr70_pnr71.2020.2.fr.