Добірка наукової літератури з теми "Reconfigurable manufacturing systems (RMS)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Reconfigurable manufacturing systems (RMS)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Reconfigurable manufacturing systems (RMS)":
Kumar, Vipin, Sreeraj Ramesan, Vipin Kumar, and Dr A. K. Madan. "Reconfigurable Manufacturing System: A Review." International Journal for Research in Applied Science and Engineering Technology 10, no. 3 (March 31, 2022): 188–99. http://dx.doi.org/10.22214/ijraset.2022.40594.
Hees, A., K. Zellner, and G. Reinhart. "Produktionsplanung in RMS/Production Planning in RMS - System for Production Process Planning in Reconfigurable Manufacturing Systems (RMS)." wt Werkstattstechnik online 105, no. 04 (2015): 209–14. http://dx.doi.org/10.37544/1436-4980-2015-04-51.
H. Garbie, Ibrahim. "Performance analysis and measurement of reconfigurable manufacturing systems." Journal of Manufacturing Technology Management 25, no. 7 (August 26, 2014): 934–57. http://dx.doi.org/10.1108/jmtm-07-2011-0070.
Smedberg, Henrik, Carlos Alberto Barrera-Diaz, Amir Nourmohammadi, Sunith Bandaru, and Amos H. C. Ng. "Knowledge-Driven Multi-Objective Optimization for Reconfigurable Manufacturing Systems." Mathematical and Computational Applications 27, no. 6 (December 9, 2022): 106. http://dx.doi.org/10.3390/mca27060106.
Liu, Chin Wei, You Lun Chen, and Wen Chien Wu. "Integrated Development of a Modularized ECM Manufacturing System Based on the Reconfigurable Manufacturing System Concept." Key Engineering Materials 516 (June 2012): 102–7. http://dx.doi.org/10.4028/www.scientific.net/kem.516.102.
Guo, Bo, Fu-Shin Lee, Chen-I. Lin, and Yun-Qing Lu. "A cloud integrated strategy for reconfigurable manufacturing systems." Concurrent Engineering 28, no. 4 (October 2, 2020): 305–18. http://dx.doi.org/10.1177/1063293x20958937.
Han, Sumin, Tai-Woo Chang, Yoo Suk Hong, and Jinwoo Park. "Reconfiguration Decision-Making of IoT based Reconfigurable Manufacturing Systems." Applied Sciences 10, no. 14 (July 13, 2020): 4807. http://dx.doi.org/10.3390/app10144807.
Renna, Paolo. "Performance Evaluation of Reconfiguration Policy in Reconfigurable Manufacturing Systems including Multi-Spindle Machines: An Assessment by Simulation." Applied Sciences 14, no. 7 (March 26, 2024): 2778. http://dx.doi.org/10.3390/app14072778.
Yu, Dong Man, Zhi Hua Gao, Xiao Jing Li, and Di Wang. "Key Technology and Architecture of Reconfigurable Manufacturing System." Applied Mechanics and Materials 556-562 (May 2014): 6034–37. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.6034.
Spicer, Patrick, and Hector J. Carlo. "Integrating Reconfiguration Cost Into the Design of Multi-Period Scalable Reconfigurable Manufacturing Systems." Journal of Manufacturing Science and Engineering 129, no. 1 (August 15, 2006): 202–10. http://dx.doi.org/10.1115/1.2383196.
Дисертації з теми "Reconfigurable manufacturing systems (RMS)":
Rösiö, Carin. "Supporting the design of reconfigurable production systems." Doctoral thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Industriell produktion, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-20306.
Del, Riego Navarro Andrés, and Pérez Álvaro Rico. "Simulation-based multiobjective optimization and availability analysis of reconfigurable manufacturing systems." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-20196.
Det finns övrigt digitalt material (t.ex. film-, bild- eller ljudfiler) eller modeller/artefakter tillhörande examensarbetet som ska skickas till arkivet.
Sohaleh, Hamed. "RECONFIGURABLE MANUFACTURING SYSTEM:AN ENABLER FOR COMPETITIVENESS FOR TODAY’S INDUSTRY." Thesis, Mälardalens högskola, Innovation och produktrealisering, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-35627.
Jiang, Claudio. "Approccio integrato per la pianificazione degli interventi manutentivi e della riconfigurazione nei sistemi RMS." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Ameer, Muhammad. "Integrated and multi-criteria approaches for process plan generation in reconfigurable manufacturing systems with consideration of system capabilities and product constraints." Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0242.
Modern manufacturing systems are going through a paradigm shift where the focus is on the integrating the digital technologies in the production systems to address the challenge of uncertain market demands. Manufacturing systems needs certain amount responsiveness to address these uncertainties by adapting accordingly, and require more changeability at physical as well as logical levels. For this purpose, modern-day manufacturing systems are designed with dynamic resource capabilities, with modular components, so that they can provide the required amount of reconfigurability. From the perspective of "industry 4.0", reconfigurability is vital for the effective adaptation of manufacturing systems in a complex environment. Reconfigurability provides the quick adaptation of these systems along with quick responsiveness towards socio-techno-economic competitiveness. The objective is to respond to modern-day challenges (both external and internal), i.e. mass customization, globalization, product variety management, system reconfiguration management, and reducing the lead time.In this thesis, the design problem of reconfigurable manufacturing systems (RMS) is considered which meets the aforementioned requirements. The goal is to design a responsive system based on two key features modularity and reconfigurability. We study the RMS design problem as, the development of a process plan for a particular part of the part family along with the selection of the system's dynamic resource capabilities to perform that part. This work is divided into three parts: (1) Co-generation of process and setup plan for a part in the reconfigurable environment. The main objective is to develop a new approach to jointly consider the setup and process plan constraints, with consideration of relationships between the operations. (2) Minimisation of reconfiguration effort in process design. We propose a novel performance index of the effort generated by the machines and fixtures reconfiguration, and part transfer. The objective is to ensure better responsiveness and high performance of the designed process plan. (3) Maximisation the utilization of dynamic resource capabilities of RMS design. We consider a RMS design problem for machine selection, where selection of different types of reconfigurable machine tools (RMTs) are carried out for performing the process plan of considered part
Haddou, Benderbal Hichem. "Développement d’une nouvelle famille d’indicateurs de performance pour la conception d’un système manufacturier reconfigurable (RMS) : approches évolutionnaires multicritères." Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0112/document.
The modern manufacturing environment is facing a paradigm shift that require more changeability at physical and logical levels. A Changeable Manufacturing System is defined as a production system that has the ability to facilitate the right changes, allowing the adjustment of its structures and processes in response to the different needs. In this context, manufacturing systems must have a very high level of reconfigurability, which is considered to be one of the major enablers of changeability. From the perspective of the “Factory of the future”, the reconfigurability is essential to effectively adapt to the ever-increasing complexity of manufacturing environments. It allows a rapid, efficient and easy adaptation of these systems while being responsive, robust and economically competitive. The objective is to respond to new internal and external constraints in terms of globalization, variety of products, mass customization, and shorter lead times. Through this thesis, we study the problem of design of reconfigurable manufacturing systems (RMS) that meets these requirements. The goal is to design responsive systems based on their key features of reconfigurability. We have studied the RMS design problem on three levels: (i) the level of the components, relating to the modules of the reconfigurable machines, (ii) the machine level and their interactions, as well as the impact of these interactions on the system and (iii) the workshop level composed of all the reconfigurable machines. We have developed for each level, performance indicators to ensure a better responsiveness and a high performance of the designed system, like the modularity index, the flexibility index, the robustness index and the layout evolution effort of a reconfigurable system. For each of the studied problems, we developed multicriteria optimization models, solved through heuristics or multicriteria metaheuristics (such as archived multi-objective simulated annealing (AMOSA) and multi-objective genetic algorithms (NSGA-II)). Numerous numerical experiments and analyzes have been performed to demonstrate the applicability of our approaches
Haddou, Benderbal Hichem. "Développement d’une nouvelle famille d’indicateurs de performance pour la conception d’un système manufacturier reconfigurable (RMS) : approches évolutionnaires multicritères." Electronic Thesis or Diss., Université de Lorraine, 2018. http://www.theses.fr/2018LORR0112.
The modern manufacturing environment is facing a paradigm shift that require more changeability at physical and logical levels. A Changeable Manufacturing System is defined as a production system that has the ability to facilitate the right changes, allowing the adjustment of its structures and processes in response to the different needs. In this context, manufacturing systems must have a very high level of reconfigurability, which is considered to be one of the major enablers of changeability. From the perspective of the “Factory of the future”, the reconfigurability is essential to effectively adapt to the ever-increasing complexity of manufacturing environments. It allows a rapid, efficient and easy adaptation of these systems while being responsive, robust and economically competitive. The objective is to respond to new internal and external constraints in terms of globalization, variety of products, mass customization, and shorter lead times. Through this thesis, we study the problem of design of reconfigurable manufacturing systems (RMS) that meets these requirements. The goal is to design responsive systems based on their key features of reconfigurability. We have studied the RMS design problem on three levels: (i) the level of the components, relating to the modules of the reconfigurable machines, (ii) the machine level and their interactions, as well as the impact of these interactions on the system and (iii) the workshop level composed of all the reconfigurable machines. We have developed for each level, performance indicators to ensure a better responsiveness and a high performance of the designed system, like the modularity index, the flexibility index, the robustness index and the layout evolution effort of a reconfigurable system. For each of the studied problems, we developed multicriteria optimization models, solved through heuristics or multicriteria metaheuristics (such as archived multi-objective simulated annealing (AMOSA) and multi-objective genetic algorithms (NSGA-II)). Numerous numerical experiments and analyzes have been performed to demonstrate the applicability of our approaches
Eriksson, Gustav, and Johan Isendahl. "Conceptual decision support tool for RMS-investments : A three-pronged approach to investments with focus on performance metrics for reconfigurability." Thesis, Tekniska Högskolan, Jönköping University, JTH, Produktionsutveckling, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-49773.
Khoo, N. K. "An integrated system for reconfigurable cellular manufacturing systems." Thesis, University of Liverpool, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.407215.
Mulubika, Chibaye. "Evaluation of control strategies for reconfigurable manufacturing systems." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80300.
ENGLISH ABSTRACT: The thesis evaluates control strategies for reconfigurable manufacturing systems by using a welding assembly cell as a case study. The cell consists of a pallet magazine, conveyor, feeder subsystem (comprising an articulated robot and singulation unit), welder subsystem (which uses a modular Cartesian robot), and inspection and removal subsystems. The research focuses on control strategies that enhance reconfigurability in terms of structure, hardware and software using agent-based control and the IEC 61499 standard, based on PC control. Reconfiguration may occur when a new product is introduced, as well as when a new subsystem is introduced or removed from the production cell. The overall control architecture is that the subsystems retain no knowledge of the product, but product information resides in the cell controller, while services offered by the subsystems are registered with the directory facilitator of the Java agent platform. The control strategies are implemented on the modular Cartesian weld robot and the cell controller for assembly cell. A layered architecture with low-level control and high-level control is used to allow separation of concerns and rapid changes in both hardware and software components. The low-level control responds in hard real-time to internal and external events, while the high-level control handles soft real-time actions involving coordination of control related issues. The results showed IEC 61499 function blocks to be better suited to low-level control application in distributed systems, while agents are more suited for high-level control. Modularity in software components enhances hardware and software scalability. Additionally, agents can support online reconfiguration of reconfigurable machines.
AFRIKAANSE OPSOMMING: Die tesis evalueer beheerstrategieë vir herkonfigureerbare vervaardigingstelsels deur gebruik te maak van ’n sweismonteersel as ’n gevallestudie. Die sel bestaan uit ’n palletmagasyn, vervoerbande, voersubstelsel (bestaande uit ’n geartikuleerde robot en singulasie-eenheid), sweissubstelsel (wat gebruik maak van ’n modulêre Cartesiese robot), en inspeksie- en verwyderingsubstelsels. Die navorsing fokus op beheerstrategieë wat herkonfigureerbaarheid verhoog in terme van struktuur, hardeware en sagteware met behulp van agent-gebaseerde beheer en die IEC 61499 standaard, wat gebaseer is op PC-beheer. Herkonfigurasie mag voorkom wanneer ’n nuwe produk in-gestel word, sowel as wanneeer ’n nuwe substelsel bygevoeg of verwyder word van die produksiesel. Die oorhoofse beheerargitektuur is dat die substelsels geen kennis van die produk hou nie, maar die produkinligting in die selbeheerder geberg, terwyl dienste wat aangebied word deur die substelsels wat geregistreer is by die gidsfasiliteerder van die Java agent platform. Die beheerstrategië is geïmplementeer op die modulere Cartesiese sweisrobot en die selbeheerder vir die monteersel. ’n Gelaagde argitektuur met ’n lae-vlak beheer en hoë-vlak beheer word gebruik om skeiding van oorwegings en vinnige veranderinge in beide hardeware en sagteware komponente toe te laat. Die lae-vlak beheer reageer hard intyds op interne en eksterne gebeure, terwyl die hoë-vlak beheer sag intyds die koördinering van beheerverwante kwessies hanteer. Die resultate het getoon dat IEC 61499 funksie-blokke beter geskik is vir lae-vlak beheer toepassing in verspreide stelsels, terwyl agente meer geskik is vir hoë-vlak beheer. Modulariteit in sagteware komponente verhoog hardeware en sagteware skaleerbaarheid. Boonop kan agente ook aanlyn herkonfigurasie van herkonfigureerbare masjiene ondersteun.
Книги з теми "Reconfigurable manufacturing systems (RMS)":
ElMaraghy, Hoda A. Changeable and Reconfigurable Manufacturing Systems. London: Springer London, 2009.
ElMaraghy, Hoda A., ed. Changeable and Reconfigurable Manufacturing Systems. London: Springer London, 2009. http://dx.doi.org/10.1007/978-1-84882-067-8.
Dashchenko, Anatoli I., ed. Reconfigurable Manufacturing Systems and Transformable Factories. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/3-540-29397-3.
Benyoucef, Lyes, ed. Reconfigurable Manufacturing Systems: From Design to Implementation. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-28782-5.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. Integrated Reconfigurable Manufacturing Systems and Smart Value Chain. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5.
Koren, Yoram. The global manufacturing revolution: Product-process-business integration and reconfigurable systems. Hoboken, N.J: Wiley, 2010.
ElMaraghy, Hoda A. Changeable and Reconfigurable Manufacturing Systems. Springer, 2010.
Dashchenko, Anatoli I. Reconfigurable Manufacturing Systems and Transformable Factories. Springer Berlin / Heidelberg, 2010.
Dashchenko, Anatoli I. Reconfigurable Manufacturing Systems and Transformable Factories. Springer, 2006.
Dashchenko, Anatoli I. Reconfigurable Manufacturing Systems and Transformable Factories. Springer London, Limited, 2007.
Частини книг з теми "Reconfigurable manufacturing systems (RMS)":
Sabioni, Rachel Campos, Joanna Daaboul, and Julien Le Duigou. "Optimization of Reconfigurable Manufacturing Systems Configuration: A Literature Review." In Lecture Notes in Mechanical Engineering, 426–35. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_67.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "RMS Value Chain Architecture." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 43–58. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_3.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "Feasibility of an RMS Design." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 145–65. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_7.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "Risks in Manufacturing Supply Chain Incorporating RMS." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 255–79. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_11.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "Product Grouping for RMS Tactical Design." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 97–124. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_5.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "RMS Capacity Utilisation Through Product Life Cycles." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 219–52. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_10.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "RMS Distinguished Characteristics Through a Design Strategy." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 61–95. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_4.
Abdi, M. Reza, Ashraf W. Labib, Farideh Delavari Edalat, and Alireza Abdi. "RMS Performance Evaluation Using ANP and Holonic Structure." In Integrated Reconfigurable Manufacturing Systems and Smart Value Chain, 197–217. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76846-5_9.
Nie, Shiqi, Sihan Huang, Guoxin Wang, and Yan Yan. "Configuration Design of Delayed Reconfigurable Manufacturing System(D-RMS)." In Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems, 63–71. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-90700-6_6.
Kataoka, Takayuki. "A Mathematical Model Considering Multi-skilled Operators and Industrial Robots on Reconfigurable Manufacturing Cells." In Lecture Notes in Mechanical Engineering, 349–56. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_39.
Тези доповідей конференцій з теми "Reconfigurable manufacturing systems (RMS)":
Kombaya, Jesus Vital, Nadia Hamani, and Lyes Kermad. "Customization Measurement in Reconfigurable Manufacturing Systems RMS." In 11th Annual International Conference on Industrial Engineering and Operations Management. Michigan, USA: IEOM Society International, 2021. http://dx.doi.org/10.46254/an11.20210450.
Kombaya, Jesus Vital, Nadia Hamani, and Lyes Kermad. "Modeling and configuration management of Reconfigurable Manufacturing Systems RMS." In 11th Annual International Conference on Industrial Engineering and Operations Management. Michigan, USA: IEOM Society International, 2021. http://dx.doi.org/10.46254/an11.20210451.
Tang, Li, Derek M. Yip-Hoi, Yoram Koren, and Wencai Wang. "An AI-Based Computer-Aided Reconfiguration Planning Framework for Reconfigurable Manufacturing Systems." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60744.
Liu, Jian, Derek M. Yip-Hoi, Wencai Wang, and Li Tang. "Optimal Part Family and Production Module Planning for Reconfigurable Manufacturing Systems." In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21070.
Raghunandan, Shyam, Derek Yip-Hoi, and Debasish Dutta. "Part and Workpiece Reconfigurability for Reconfigurable Machining Systems." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1011.
Arista, Rebeca, Fernando Mas, Domingo Morales-Palma, and Carpoforo Vallellano. "A Proposal for Using Models for Manufacturing (MfM) Methodology to Reconfigure Aerospace Manufacturing Systems." In 10th Manufacturing Engineering Society International Conference. Switzerland: Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-kdixd6.
Spicer, J. Patrick, and Hector J. Carlo. "Simultaneous Scalable-Reconfigurable Manufacturing System Design and Inventory Control Policy Decision Making." In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21083.
Singh, Prince Pal, Jatinder Madan, and Harwinder Singh. "Performance Metrics for Product Flow Configuration in a Reconfigurable Manufacturing System (RMS)." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2951.
Baqai, Aamer, and Arsalan Shafiq. "Dimensional Analysis of the Generated Design Solutions for Reconfigurable Manufacturing System." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64406.
Hill, Rodney. "Educating Children in Manufacturing and Mechanical Concepts." In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59312.