Готові списки джерел за темами / Process feasibility

Добірка наукової літератури з теми "Process feasibility"

Автор: Grafiati

Опубліковано: 10 грудня 2022

Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Process feasibility".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Process feasibility"

Nakamura, Tsuyoshi, Ryoichi Takasu, Patrick Wong, and Mireilli Maendhout. "Process Feasibility Investigation of Freezing Free Process." Journal of Photopolymer Science and Technology 22, no. 5 (2009): 647–52. http://dx.doi.org/10.2494/photopolymer.22.647.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Stoppino, Pier Paolo, Armando Conci, Tito Lessio, and Davide Ferrara. "System in Package Feasibility Process." Proceedings of the IEEE 97, no. 1 (January 2009): 141–47. http://dx.doi.org/10.1109/jproc.2008.2007475.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bramley, A. N., C. F. Lugora, and F. H. Osman. "Forging Process Modeller — A Feasibility Study." CIRP Annals 39, no. 1 (1990): 227–30. http://dx.doi.org/10.1016/s0007-8506(07)61041-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kamminga, J. D., D. Doerwald, M. Schreurs, and G. C. A. M. Janssen. "Industrial feasibility of the nitrocoat process." Surface and Coatings Technology 200, no. 5-6 (November 2005): 1837–41. http://dx.doi.org/10.1016/j.surfcoat.2005.08.008.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Decourcey, James, Julie Robertson, Ron Suluiz, and Edgard Wrobel. "Feasibility: The process and the people." Journal of Healthcare Risk Management 28, no. 3 (March 2008): 11–18. http://dx.doi.org/10.1002/jhrm.5600280304.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Swinnen, Filip, Koen Faes, and Wim De Waele. "Feasibility study of the friction surfacing process." International Journal Sustainable Construction & Design 8, no. 1 (October 30, 2017): 9. http://dx.doi.org/10.21825/scad.v8i1.6813.

Повний текст джерела

Анотація:

Friction surfacing is a solid state cladding process based on the plastic deformation of a translating and rotating metallic consumable rod pressed against a stationary substrate. It is mostly used on mild and stainless steel and on aluminium. Thanks to the solid state nature of the process, it allows to join dissimilar metal combinations, e.g. aluminium to steel or to ceramics or several combinations of non-ferrous metals. Moreover, a continuous and fine-grained deposition is formed. Most research has been focussed on the feasibility of certain material combinations and on correlating the deposited layer quality to input parameters. In this work, a methodical approach to evaluate clad layers and to assess their properties is discussed. This approach consists of a visual assessment, a macrographic examination and a performance analysis and has shown to be apt to compare the clad layer quality.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kuznetsov, Alexander, Andrej Jeromen, Gideon Levy, Makoto Fujishima, and Edvard Govekar. "Annular Laser Beam Cladding Process Feasibility Study." Physics Procedia 83 (2016): 647–56. http://dx.doi.org/10.1016/j.phpro.2016.08.067.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Roszkowska, E., and R. Wójcik. "Problems of Process Flow Feasibility in FAS." IFAC Proceedings Volumes 25, no. 31 (November 1992): 115–20. http://dx.doi.org/10.1016/s1474-6670(17)49376-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Somasundaram, P. E., and Y. Chandrashekhar. "Feasibility of arresting the process of remodeling." Medical Clinics of North America 88, no. 5 (September 2004): 1193–207. http://dx.doi.org/10.1016/j.mcna.2004.04.014.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bause, Katharina, Aline Radimersky, Marinette Iwanicki, and Albert Albers. "Feasibility Studies in the Product Development Process." Procedia CIRP 21 (2014): 473–78. http://dx.doi.org/10.1016/j.procir.2014.03.128.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Process feasibility"

Lai, Sau Man. "Feasibility and flexibility in chemical process design /." View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?CBME%202009%20LAI.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Crous, Duncan. "Biorefineries : a method to compare process alternatives using different economic scenarios." Diss., University of Pretoria, 2010. http://hdl.handle.net/2263/24528.

Повний текст джерела

Анотація:

A general overview on biorefineries and cost estimation methods is presented to provide background knowledge needed to create software focused on comparing different biorefinery configurations. The software is implemented in Microsoft Excel 2003 and can account for the capital cost, operating cost and utility requirements of different process operations based on their operating scale. To facilitate consistency in estimating capital costs an equipment factored capital cost method is implemented based on the Guthrie method. Factors used determine the capital cost includes:

purchased equipment cost
paterials of construction
operating pressure
time index factors

The program also includes a custom search algorithm that cycles through the processes to give candidates, based on feasibility equations, of single product focused configurations that can be further customised for analysis. With the program’s focus on comparing alternatives hypothetical processes are created that give the same product but use different possessing routes and starting materials. The solver was used to calculate the candidate configurations and then manually configured to evaluate energy production from side products. The program’s functionality and purpose was then shown by altering costs to give results for a different techno-economic scenario.
Dissertation (MEng)--University of Pretoria, 2011.
Chemical Engineering
unrestricted

Стилі APA, Harvard, Vancouver, ISO та ін.

Weber, Bruce R. "Integration of the scientific process with the appraisal process for evaluating the feasibility of brownfield redevelopment." Thesis, University of Ulster, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.420225.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gil, Arnaud, and Alex Raffier. "Wallpaper drying solutions : Feasibility study of a low temperature drying process." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-754.

Повний текст джерела

Анотація:

The wallpaper company Duro Sweden AB, one of the most important Scandinavian

wallpaper manufacturers, wants to decrease its energy use and costs and make its

production more environmentally friendly. It implies changes in the key process energy

use whom consists mainly by drying process using heat production from oil.

The purpose of this project, studied by the consulting company Sweco Theorells AB,

is to determine the feasibility of a change in the energy utilisation implemented to the

most representative process to propose future solutions’ basis on the future energy

question.

The company use mainly two kind of energy, electricity with 1055MWh per year and

oil with 1985MWh per year. The oil power consumption and cost represent respectively

65% and 73% of the global part.

Several proposed changes with better energy efficiency are presented : use of district

heating as a heat source, Infrared Drying, combination, etc; but due to the important

rebate make by the Swedish government on the oil price, they are not currently viable to

achieve.

But the constant rise of the oil price could be sooner a strong incentive to make these

improvals, strongly environmentaly friendly and power consumption reducer,

economicaly viable in the long term.

Стилі APA, Harvard, Vancouver, ISO та ін.

Lobry, Emeline. "Batch to continuous vinyl chloride suspension polymerization process : a feasibility study." Phd thesis, Toulouse, INPT, 2012. http://oatao.univ-toulouse.fr/11498/1/lobry.pdf.

Повний текст джерела

Анотація:

Continuous processes present the benefit to be safer and more cost saving than batch processes. Many researches have been carried out in fine chemistry but few contributions refer to polymerization. We focus on the vinyl chloride suspension polymerization. This process has been extensively studied in batch with lots of improvement regarding the formulation and the technologies. This polymerization process is highly complex due to the toxic nature of the monomer, the good manage of heat transfer and stirring. Moreover the reaction step remains the only batch step of the PVC production. According to the PVC grain formation, the process can be divided into three steps (i) a liquid-liquid dispersion step in which the monomer droplet (30-50 µm) are generated and stabilized, (ii) a controlled agglomeration step of the reacting droplets exhibiting a sticky behaviour, (iii) a reaction step until the conversion rate is around 80-90% and the particles size is stable. In this study, the different technologies suitable for the different steps are pointed out. Based on the state of the art of the grain behaviour depending on the reaction conversion and on the literature concerning polymerization continuous process, static mixers and different co-current pulsed columns are proposed. Three technologies with different model system were chosen to study the liquid-liquid dispersion step. Static mixers allow the control of the droplet size under turbulent flow. In the range of the operating conditions, the dispersed phase concentration does not have a significant effect on the droplet size. The interfacial tension appears to be the most significant physico-chemical parameters. Correlation to predict the mean droplet size is proposed depending on different dimensionless numbers based on the hydrodynamics and on the systems: the Reynolds and Weber numbers. Given the promising results, static mixers are implemented at pilot scale to load the batch prior to polymerization. Their use demonstrates a noticeable reduction of the loading time and a better homogenisation of the different suspending agents and initiator inside the PVC grain. The two co-current pulsed columns design studied are the discs and doughnuts pulsed column and the COBR (continuous oscillatory baffled reactor, Nitech). For the first one, the effect of the packing materials (type and height), of the physico-chemical parameters (dispersed phase concentration, surfactant) and of hydrodynamic parameters (flowrate and oscillation conditions) on the droplet size are investigated where as for the second one the study is limited to the hydrodynamic parameters. A mean droplet size correlation is proposed based on the characteristic dimensionless numbers. The three continuous contactors used for liquid-liquid dispersion are compared in term of energy dissipation rate. The reaction is carried out in a continuous tubular reactor (the pulsed column). The column is suitable to transport solid-liquid suspension. Vinyl acetate suspension polymerization is performed to demonstrate the feasibility and particularly to study the encrusting and fouling problem. The first results are very promising.

Стилі APA, Harvard, Vancouver, ISO та ін.

Shin, Jennifer Hyunjong 1974. "Feasibility study of rapid prototyping using the uniform droplet spray process." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/28201.

Повний текст джерела

Анотація:

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1998.
Includes bibliographical references (leaf 29).
This work studied the feasibility of rapid prototyping using the Uniform Droplet Spray (UDS) process. Straight and stable liquid metal jets are crucial requirements in the application of UDS to rapid prototyping. Methods to maintain the jet straight and stable were developed. Hardware improvements include an auxiliary orifice mounting fixture and a new crucible bottom with a tightly-fitting orifice-pocket. A droplet trajectory controller, including deflection plates and a pulse provider to a charging plate, was developed to precisely deliver droplets for deposition. The degree of separation between deflected and undetected streams of droplets was modeled and the prediction was compared with experimental results. This comparison revealed that the degree of actual deflection was approximately twice as high as the predicted value. Using the trajectory controller, deposition was conducted using pure tin (Sn) with droplet impact conditions of velocity and liquid fraction of 45 m/s and 97%, respectively. The deposition frequency was varied in the experiment to study its effects on deposit shapes. A low frequency deposition at 57Hz produced a vertical pillar, whereas a high frequency deposition at 574Hz resulted in a large drop.
by Jennifer Hyunjong Shin.
S.B.

Стилі APA, Harvard, Vancouver, ISO та ін.

Osama, Ziada, and Konstantina Tzivleri. "Feasibility Study on the Introduction of Automation in the Assembly Process." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-104451.

Повний текст джерела

Анотація:

The assembly process in Volvo Construction Equipment, in Braås, is fully hand-operated. The aim of this Master thesis project is to develop and evaluate different concepts of how the automation level could be increased. This study aims to find reliable technology/automation solutions that could be used in one or more operations in the assembly process and identify the benefits for Volvo Construction Equipment. The work will end up in concepts and recommendations on what areas of the assembly process would be most beneficial to automate first. Conversations, observations, and interviews took place in the assembly department to help in the selection of the station in which automation can be most easily introduced. Automated procedures at this station will have advantages since they will include robots. The robot can take over some of the assembly procedures, while the worker can be occupied with others. From an ergonomic perspective, these procedures will be improved; thus, the efficiency and the quality will be better, and this will be achieved because the human will focus on procedures where creativity and human hands are needed, and the robot will take over the most un-ergonomic and difficult operations.

Стилі APA, Harvard, Vancouver, ISO та ін.

Nolte, Mirco. "Commercial biodiesel production in South Africa : a preliminary economic feasibility study." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/369.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cakici, Fatma Zehra. "The Process And Feasibility Of Building Deconstruction: A Case Study In Ankara." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/3/12606301/index.pdf.

Повний текст джерела

Анотація:

Today because of changes in the zoning plans, structural problems, building obsolescence and owner&rsquo
s wishes, old buildings are being demolished to erect newer, larger and taller ones. The objective of this study was to investigate the process and feasibility of building deconstruction. A literature survey was conducted on two unpublished theses at Middle East Technical University (METU), and publications available on web sites and international conference proceedings. Case studies were conducted on building deconstruction and demolition processes, and recovery of used building materials (UBMs) in Ankara. Information related to these issues was obtained through informal interviews with demolition contractors, demolition teams, merchants of UBMs and building contractors. Information regarding the official procedure of demolition was gathered from Ç
ankaya and Yenimahalle Municipalities. This study confirmed that recovery and reuse of UBMs is a continual practice in Ankara. In the light of case studies and interviews, it was possible to determine the problems in building deconstruction, such as building systems, materials, components and connections that give rise to difficulties during the deconstruction of buildings. It was also observed that UBMs are being reused either as it is or after modifications, and waste timber components are sold for fuel, while only metals are recycled to be used in new production. On the other hand, reinforced concrete components such as slabs, columns and beams can neither be reused nor recycled, and thus they are wasted. The findings of the investigation indicated that building deconstruction practices were found to be feasible and profitable job. The success of building deconstruction is dependent on type of tools used, sufficient time, and worker ability and experience, whereas the feasibility of deconstruction depends on the quality, quantity, type and condition of materials, components and connections used in a building.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kaukuata–Tjitunga, Naomy. "An assessment of the drafting of the 2005 Ovambanderu constitution: ‘process and institutional capacity’." Thesis, UWC, 2008. http://hdl.handle.net/11394/2870.

Повний текст джерела

Анотація:

Masters in Public Administration - MPA
This research report sets up a model of policy development at Traditional Authority level in Namibia that is then used in examining the Ovambanderu constitutional case. Reference to the Generic Model, as used by de Coning (2000) and the Moore (1995) Strategic Triangle is not new or original to this thesis. These models have been used elsewhere and were considered as appropriate for this case study due to the complexity of the issues under consideration. This study attempts to demonstrate the importance of applying public policy models and theories to policy making in Namibia. Firstly, the author has applied the generic model to the Ovambanderu case to elicit information pertaining to the process followed in drafting the constitution. Secondly, the Moore Strategic Triangle was used in furthering discussion on the importance of considering phases and stages in the public policy process, which touch on such aspects as political feasibility, substantive value and administrative feasibility (Moore, 1995). The emphasis here was on the importance of dynamism in the policy-making process, not as a once off event but as an ongoing process. This research report shows that public policy/constitution making needs specialised skills in order for it to be a success. Capacity needs to be sourced and used appropriately, while objectives of the policy/constitution are communicated clearly to the stakeholders. Again the fear amongst the community that once a policy/constitution is implemented it becomes binding and difficult to change needs to be addressed by clearly informing people that a policy remains a statement of intent until it is put to use and once it is implemented there is always room for improvement on issues that may create problems for the affected parties. Another important lesson is the fact that public policy making has been and remains a process as it involves bargaining, issue prioritisation, issue filtration, advocacy, reporting and consultation before decisions are made. The Ovambanderu constitutional problem has now set a scene for better policy planning at Traditional Authority level and the government needs to consider this as a serious phenomenon that can lead to major problems if ignored

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Process feasibility"

Kelsey, Craig. The feasibility study process for parks and recreation. Reston, Va: American Alliance for Health, Physical Education, Recreation, and Dance, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Holmes, Paul. Feasibility evaluation and process implementation of plant hairy roots. Birmingham: University of Birmingham, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jang, W. Cascade air-stripping system for removal of semi-volatile organic contaminants: Feasibility study. Denver, CO: AWWA Research Foundation and American Water Works Association, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Insurance, Maine Bureau of. Study on the feasibility of and process for the creation of an Insurance Fraud Division within the Bureau of Insurance. [Augusta, Me.]: Bureau of Insurance, 2005.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

The feasibility of linking research-related data bases to federal and non-federal medical administrative data bases: Report to Congress. Rockville, Md: U.S. Dept. of Health and Human Services, Public Health Service, Agency for Health Care Policy and Research, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

United States. Agency for Health Care Policy and Research. The feasibility of linking research-related data bases to federal and non-federal medical administrative data bases: Report to Congress. Rockville, Md: U.S. Dept. of Health and Human Services, Public Health Service, Agency for Health Care Policy and Research, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kalin, Margarete A. A feasibility study on the use of the Chara process and an assessment of the reclamation by ecological engineering for the Levack tailings. Toronto, Ont: Boojum Research, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Scane, Joyce. Process/conferencing writing and computers for adult basic education students: A feasibility study : final report, September 30, 1989, Ministry of Skills Development, Ontario. Toronto, Ont: Ontario Institute for Studies in Education, 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kalin, Margarete A. A feasibility investigation of the potential use of the "Chara process" and indigenous biota as passive polishing agents for cyanide in waste liquors at Arvida. Toronto, Ont: Boojum Research, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Virginia. Department of Education. Report of the planning and construction process to support the consolidation of the State's two schools for the deaf, blind, and multi-disabled: Report of the Department of Education to the Governor and the General Assembly of Virginia. Richmond, Va: Commonwealth of Virginia, 2005.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Process feasibility"

Farrall, Peter. "Managing the Process." In Feasibility Studies, 42–49. London: RIBA Publishing, 2022. http://dx.doi.org/10.4324/9781003343769-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ladewig, Bradley, and Benjamin Asquith. "Process Feasibility." In SpringerBriefs in Molecular Science, 17–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24852-8_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jović, Fran. "The feasibility study." In Process Control Systems, 333–53. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4684-8375-8_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jović, Fran. "The feasibility study." In Process Control Systems, 305–23. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-3116-2_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mecklenburgh, J. C. "Process Feasibility And Thermodynamic Teaching." In Teaching Thermodynamics, 363–72. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2163-7_38.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Torry, Malcolm. "Is a Citizen’s Income Policy Process Feasible?" In The Feasibility of Citizen's Income, 195–236. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-53078-3_9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Choguill, Charles L. "Financial Feasibility and the Planning Process." In New Communities for Urban Squatters, 130–51. Boston, MA: Springer US, 1987. http://dx.doi.org/10.1007/978-1-4613-1863-7_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kamal, S. M., and Uday Shanker Dixit. "Feasibility Study of Thermal Autofrettage Process." In Advances in Material Forming and Joining, 81–107. New Delhi: Springer India, 2015. http://dx.doi.org/10.1007/978-81-322-2355-9_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Meertens, Lucas O., Maria-Eugenia Iacob, and Silja M. Eckartz. "Feasibility of EPC to BPEL Model Transformations Based on Ontology and Patterns." In Business Process Management Workshops, 347–58. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12186-9_33.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hens, Pieter, Monique Snoeck, Manu De Backer, and Geert Poels. "Distributed Event-Based Process Execution - Assessing Feasibility and Flexibility." In Enterprise, Business-Process and Information Systems Modeling, 133–47. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21759-3_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Process feasibility"

Sears, J. Allen, and Stephen E. Cross. "The Integrated Feasibility Experiment (IFE) process." In the first international conference. Morristown, NJ, USA: Association for Computational Linguistics, 2001. http://dx.doi.org/10.3115/1072133.1072189.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Quesson, Benoit, Paul van Neer, Selman S. Tamer, Kodai Hatakeyama, Maarten H. van Es, Martijn van Riel, and Daniele Piras. "GHz half wavelength contact acoustic microscopy (HaWaCAM): a feasibility study." In Metrology, Inspection, and Process Control XXXVI, edited by John C. Robinson and Matthew J. Sendelbach. SPIE, 2022. http://dx.doi.org/10.1117/12.2613753.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yut, G., and T. C. Chang. "Assessing the feasibility of a process plan." In the fourth ACM symposium. New York, New York, USA: ACM Press, 1997. http://dx.doi.org/10.1145/267734.267810.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lauterbach, Christoph, Bastian Schmitt, and Klaus Vajen. "Feasibility Assessment of Solar Process Heat Applications." In ISES Solar World Congress 2011. Freiburg, Germany: International Solar Energy Society, 2011. http://dx.doi.org/10.18086/swc.2011.23.12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Neuhierl, Andreas, and Hartmut Hofrichter. "MCDM in Feasibility Analysis of R and D Programs." In The International Symposium on the Analytic Hierarchy Process. Creative Decisions Foundation, 2009. http://dx.doi.org/10.13033/isahp.y2009.062.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Matsunaga, Kentaro, Tomoya Oori, Hirokazu Kato, Eishi Shiobara, Makoto Muramatsu, Mitsuaki Iwashita, Takahiro Kitano, et al. "Feasibility studies of coating method for planarization process." In SPIE Advanced Lithography, edited by Clifford L. Henderson. SPIE, 2009. http://dx.doi.org/10.1117/12.813647.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Templeton, Michael, Khoi Phan, and Edwin Sum. "Feasibility Study of Silylation Process for Submicron Manufacturing." In 1989 Microlithography Conferences, edited by Elsa Reichmanis. SPIE, 1989. http://dx.doi.org/10.1117/12.953055.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Seo, D., N. Mahiou, K. Ogawa, T. Shoji, K. Ito, and I. Tirtom. "Feasibility of Polycarbonate Coatings by Cold Spray Process." In ITSC2010, edited by B. R. Marple, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. DVS Media GmbH, 2010. http://dx.doi.org/10.31399/asm.cp.itsc2010p0714.

Повний текст джерела

Анотація:

Abstract Cold spray deposition of polycarbonate on the various substrates has been investigated. The polycarbonate particles are sieved and accelerated at elevated temperature in air through a DeLaval type nozzle, and are deposited on the metallic and ceramic substrates. The influences of the particle size, the gas temperature, the thermal conductivity and surface roughness of substrate on the deposition process are studied. As a result, the continuous deposits are formed on the metallic substrate. The powder sieved below 300 μm shows better deposition efficiency. Thin film of melted polycarbonate has been formed on the surface of substrate to act as a bonding layer, and its crystalline structure is changed to be amorphous, which is the more stable state for the polycarbonate. The coating seems to be better when the thermal conductivity of metallic substrate is low. For the ceramic substrates, there is no deposition whatever was the thermal conductivity.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kusuma, Guntur, Samantha Sykes, Ciarán McInerney, and Owen Johnson. "Process Mining of Disease Trajectories: A Feasibility Study." In 13th International Conference on Health Informatics. SCITEPRESS - Science and Technology Publications, 2020. http://dx.doi.org/10.5220/0009166607050712.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Azhar, Nur Adriana Hasya Mohd, Goh Chin Hock, Shahira Amira Shaari, Bahisham Yunus, and Tiong Sieh Kiong. "Feasibility Study of Renewable Energy Using Levelized Cost Energy." In 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC). IEEE, 2019. http://dx.doi.org/10.1109/icspc47137.2019.9067983.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Process feasibility"

Howden, G. F. B Plant process piping replacement feasibility study. Office of Scientific and Technical Information (OSTI), February 1996. http://dx.doi.org/10.2172/483396.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

William Tuminello, Maciej Radosz, and Youqing Shen. Novel Sorption/Desorption Process for Carbon Dioxide Capture (Feasibility Study). Office of Scientific and Technical Information (OSTI), November 2008. http://dx.doi.org/10.2172/993828.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dean, R. A., and M. R. Peet. Feasibility Study for the Upgrade of the Process Waste Treatment System. Office of Scientific and Technical Information (OSTI), May 1999. http://dx.doi.org/10.2172/8815.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Heard, F. J. Thermal hydraulic feasibility assessment of the hot conditioning system and process. Office of Scientific and Technical Information (OSTI), October 1996. http://dx.doi.org/10.2172/658943.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lazarus, L. J. Feasibility of using acoustic emission to determine in-process tool wear. Office of Scientific and Technical Information (OSTI), April 1996. http://dx.doi.org/10.2172/233286.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bigelow, Tim, Robert Duckworth, Richard Goulding, Earle Burkhardt, Sharon Robinson, and Mehdi Asgari. Plasma Separation Process Feasibility Study for Commercial Enrichment of Gadolinium-157. Office of Scientific and Technical Information (OSTI), June 2020. http://dx.doi.org/10.2172/1647749.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ramsey, W. G., D. Miller, R. Minichan, L. Coleman, R. Schumacher, B. Hardy, and R. Jones. Vitrification of F-area americium/curium: feasibility study and preliminary process recommendation. Office of Scientific and Technical Information (OSTI), April 1994. http://dx.doi.org/10.2172/568420.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pond, III, Powell Samuel B., Norton Thomas E., Thayer Jennifer J., and Paul W. Feasibility of Using Realistic Job Previews in the Army Recruiter Training Process. Fort Belvoir, VA: Defense Technical Information Center, October 1992. http://dx.doi.org/10.21236/ada257914.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

McCann, T. J., M. Skubnik, and M. F. Wilson. Feasibility study of a low severity hydrogenation process for upgrading jet and diesel fuels. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1988. http://dx.doi.org/10.4095/304400.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hunter, William, Travis Logsdon, and James Oberg. Feasibility Study and Process Recommendation for United States Air Force Currency Transportation Mission: Jingle Runs"". Fort Belvoir, VA: Defense Technical Information Center, December 2005. http://dx.doi.org/10.21236/ada443347.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!