Готові списки джерел за темами / Power transmission line performance

Добірка наукової літератури з теми "Power transmission line performance"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Power transmission line performance".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Power transmission line performance"

1

Li, Feng Xia, and Yue Long Wang. "Based on the TLM Method 1000kV UHV Transmission Line Performance Analysis." Advanced Materials Research 383-390 (November 2011): 2917–22. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.2917.

Повний текст джерела
Анотація:
The TLM model of 3 - phase pow er t ran sm ission line is developed. Appling the transmission line modeling (TLM) method to analysis 1000kV ultrahigh voltage( UHV) AC transmission line, the obtained results prove that it is economical and reasonable to transmit the natural power by power transmission, and the transmission lines is a long-distance transmission power ; but both the super power and the power transmission, the transmission power reduce with the increase of transmission distance.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Duche, Dipashree Navanath. "Power Line Communication Performance Channel Characteristics." Computer Engineering and Applications Journal 3, no. 1 (February 6, 2014): 34–42. http://dx.doi.org/10.18495/comengapp.v3i1.42.

Повний текст джерела
Анотація:
Power lines form the medium of transmission in PLC systems. The original purpose of these lines is the transportation of electric signals at 50 or 60 Hz .This paper proposes a new channel modeling method for power line communications networks based on the multipath profile in the time domain. The new channel model is developed to be applied in a range of Power line Communications (PLC) research topics such as impulse noise modeling, deployment and coverage studies, and communications theory analysis. The statistical multipath parameters such as path arrival time, magnitude and interval for each category are analyzed to build the model. Each generated channel based on the proposed Power line communication that a performance channel characteristic represents a different realization of a PLC network
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Rafea M. Abd El-Maksoud, Rafea M. Abd El-Maksoud. "Advanced Power Transmission System." journal of King Abdulaziz University Engineering Sciences 23, no. 2 (February 22, 2012): 191–207. http://dx.doi.org/10.4197/eng.23-2.10.

Повний текст джерела
Анотація:
Different researches are adopted to modify and enhance automatic transmission by every means. Whereas, torque converter that represents the most important component in such transmission suffers from some problems that are not completely solved. In this paper, power transmission system is herein introduced as a unique power transmission system that is not affected by torque converter problems. This power transmission operates with power splitting concept and is composed of conventional torque converter connected to planetary sets. Three clutches are used to shift the operating modes and unique positive displacement hydraulic couplings are utilized to regulate performance in power paths. Also, a modified model used to predict torque converter performance is utilized with planetary gear kinetics to assess the transmission performance. Moreover, the present system operates with high performance. Unlike the automatic transmission that operates in line, the present system operates with infinity number of operational bands for each engine speed.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Digioia, A. M., and L. F. Rojas-Gonzalez. "Rock socket transmission line foundation performance." IEEE Transactions on Power Delivery 9, no. 3 (July 1994): 1570–76. http://dx.doi.org/10.1109/61.311208.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Li, Fang Yuan, Hui Xia Ding, and He Lang. "Power OTN Communications Transmission Performance Simulation Calculation." Applied Mechanics and Materials 543-547 (March 2014): 2488–91. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.2488.

Повний текст джерела
Анотація:
This paper briefly introduced the main linear damages in the network layer of electric power Optical Transmission Network which contains fiber loss, chromatic dispersion and polarization mode dispersion. Based on the engineering practice in the application of power system, this paper studied the loss in the optical fiber cable line. The paper also studied chromatic dispersion and polarization mode dispersion. The calculation models were concluded and used for simulation verification. Each model can be used to power OTN engineering design.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Yang, Ming Bo, Zi Ze Liang, En Li, Kai Liang Zhang, and Guo Dong Yang. "Induction Power Supply System for Power Transmission Line Inspection Robot." Advanced Materials Research 462 (February 2012): 860–65. http://dx.doi.org/10.4028/www.scientific.net/amr.462.860.

Повний текст джерела
Анотація:
In order to prolong continuous working time of one transmission line inspection robot, a power supply system with induction charging unit for this inspection robot is introduced in this paper. Special current transformer by which the robot could get power from power line is designed according to the magnetic field condition around the transmission line. Besides, charging circuit for Li-battery pack is also introduced. A fly-back circuit is applied in the circuit to provide precisely accessible input power for charging battery packs. Experimental results show that the power supply system could have good performance on extending the continuous working period of the transmission line inspection robot.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Gandotra, Rupika, Kanika, and Kirti Pal. "The VSC-HVDC Transmission System Performance Assessment." Journal of Physics: Conference Series 2570, no. 1 (August 1, 2023): 012025. http://dx.doi.org/10.1088/1742-6596/2570/1/012025.

Повний текст джерела
Анотація:
Abstract As the use of renewable resources increases the transfer of power from remote area to consumer is a big challenge. Therefore, Voltage Source Converter High Voltage Direct Current (VSC-HVDC) transmission is gaining more popularity for integration of renewable energy generators to the consumers using smart grid. Even after many advantages of HVDC transmission system it is not used popularly due to unexpected instability in the system. However recent developments in semiconductor devices and control techniques the HVDC link operation in transmission system becomes easier. In this paper VSC based HVDC system is designed with AC-DC converter model for power flow assessment of both sides of HVDC link. To analyze the proposed model a simulation model of 75km DC line with voltage source converter (VSC) based AC-DC converter model on both side of DC line is designed in a MATLAB environment. HVDC link efficiency is calculated by analyzing power flow through AC lines at both ends of HVDC line.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Karuppiah, N., S. Muthubalaji, S. Ravivarman, Md Asif, and Abhishek Mandal. "Enhancing the performance of Transmission Lines by FACTS Devices using GSA and BFOA Algorithms." International Journal of Engineering & Technology 7, no. 4.6 (September 25, 2018): 203. http://dx.doi.org/10.14419/ijet.v7i4.6.20463.

Повний текст джерела
Анотація:
Flexible Alternating Current Transmission System devices have numerous applications in electrical transmission lines like improvement of voltage stability, reactive power compensation, congestion management, Available Transfer Capacity enhancement, real power loss reduction, voltage profile improvement and much more. The effectiveness of these FACTS devices is enhanced by the placement of these devices in the transmission lines. The placement is based on transmission line sensitivity factors such as Bus voltage stability index and line voltage stability index. This research article focuses on optimizing the location, number and ratings of FACTS devices using Evolutionary Algorithms like Bacterial Foraging Algorithm and Gravitational search algorithm. FACTS devices such as Static Var Compensator, Thyristor Controlled Series Capacitor and Unified Power Flow Controller are placed on IEEE 14 bus and IEEE 30 bus systems for reducing the real power loss in the transmission system. The results show that the performance of the transmission lines is enhanced more using Bacterial Foraging Algorithm than Gravitational Search Algorithm.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Hlaing, Ya Min Su, and Ze Ya Aung. "Performance Analysis on Transmission Line for Improvement of Load Flow." Advanced Materials Research 433-440 (January 2012): 7208–12. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.7208.

Повний текст джерела
Анотація:
This thesis implements power flow application, Newton-Raphson method. The Newton-Raphson method is mainly employed in the solution of power flow problems. The network of Myanma electric power system is used as the reference case. The system network contains 90 buses and 106 brunches. The weak points are found in the network by using Newton-Raphson method. Bus 16, 17, 85 and 86 have the most weak bus voltages. The medium transmission line between bus 87 and bus 17 is compensated by using MATLAB program software. The transmission line is compensated with shunt reactors, series and shunt capacitors to improve transient and steady-state stability, more economical loading, and minimum voltage dip on load buses and to supply the requisite reactive power to maintain the receiving end voltage at a satisfactory level. The system performance is tested under steady-state condition. This paper investigates and improves the steady–state operation of Myanma Power System Network.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Moss, P. L., J. P. Zheng, G. Au, P. J. Cygan, and E. J. Plichta. "Transmission Line Model for Describing Power Performance of Electrochemical Capacitors." Journal of The Electrochemical Society 154, no. 11 (2007): A1020. http://dx.doi.org/10.1149/1.2778126.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Power transmission line performance"

1

Liang, Feng. "Performance enhancement of digital relays for transmission line distance protection /." Internet access available to MUN users only, 2003. http://collections.mun.ca/u?/theses,153681.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mukherjee, Tonmoy Shankar. "High performance, low-power and robust multi-gigabit wire-line design." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/39515.

Повний текст джерела
Анотація:
The object of this research is to develop robust wire-line systems which demonstrate high performance while simultaneously consuming low power. The main focus of this work is the Clock and Data Recovery (CDR) system, which is the primary circuit of any modern wire-line transceiver. Different techniques starting from circuit-level to system-level have been investigated in this work to improve the performance of multi-gigabit CDRs. A 62 GHz bandwidth amplifier has been presented to address the need for a scalable amplifier for CDR needs. A new technique has been proposed to improve the radiation immunity of latches, to reduce the BER in CDRs occurring due to package radiations. An injection-lock based clock recovery method was investigated as an alternative to PLL based CDRs as they can be used for burst-mode wire-line communication. The investigation yielded the vulnerability of the method to jitter (false-locking and high jitter transfer), the attenuation of which is critical to commercial CDRs. A novel false-lock detector system has been proposed and demonstrated for the first time as a robust solution to the issue of false-locking of CDRs due to repetitive patterns. The implementation of the final CDR system required the use of an L-C tank VCO, the components of which are generic for all commercial CDRs. A new systematic layout technique for the VCO has been proposed and demonstrated in this work to substantially improve the layout area and the associated parasitics, approximately by 70 %. This new layout addresses a critical yet often neglected part of VCO design. Furthermore, a new concept has been proposed to optimize static dividers with respect to their power consumption and number of devices.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mthunzi, Everett Mondliwethu. "Performance analysis of a protection scheme based on P-class synchrophasor measurements." Thesis, Cape Peninsula University of Technology, 2016. http://hdl.handle.net/20.500.11838/2378.

Повний текст джерела
Анотація:
Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2016.
Power grid and system protection advancement greatly depend on technological advances. Advent technologies like digital microprocessor type protective relays facilitate paradigm shifts, providing inimitable beneficial engineering adaptations. Phasor measuring technology provides one such technological advance. The onset and rapid development of the Phasor Measuring Unit (PMU) provides an excellent platform for phasor-based, power system engineering. Power transmission constitutes a critical section in the electric power system. The power system transmission lines are susceptible to faults which require instant isolation to establish and maintain consistent system stability. This research focuses on the study of transmission line protection based on P-Class synchrophasor measurements. The IEEE C37.238-2011 Precision Time Protocol (PTP) paradigm shift facilitates practical application of synchrophasors in protection schemes. Synchrophasor procession and accurate data alignment over wide areas support the hypothesis of a phasor-based transmission line differential protection. This research aims to directly implement P-Class synchrophasors in transmission line differential protection, employing synchrophasors to determine fault conditions and administer corresponding protective actions in wide area transmission lines. The research also aims to evaluate the operational characteristics of the synchrophasor-based transmission line differential protection scheme. The research deliverables include a laboratory scale Test-bench that implements the PMU-based transmission line differential protection scheme, and a differential protection utility software solution that follows guidelines specified by the C37.118-2011 standard for synchrophasors. The findings stand to evaluate performance of the PMU-based line differential protection scheme, verifying the protection model as an alternate, practical and feasible backup protection solution. The research deliverables include a synchrophasor-based current differential algorithm, software utility for implementing the PMU-based protection scheme and a Test-bench for concept and feasibility validation.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Adebisi, Bamidele. "Broadband Transmission over indoor Power-line channels." Thesis, Lancaster University, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.536027.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lu, Liping. "Performances and quality of service of PLC networks for MV and LV distribution systems." Thesis, Vandoeuvre-les-Nancy, INPL, 2006. http://www.theses.fr/2006INPL080N/document.

Повний текст джерела
Анотація:
In this thesis, we are interested in a wide-area PLC (Power Line Communication) network to provide a communication infrastructure for monitoring and control of energy distribution and consumption. This work has been carried out as a part of REMPLI (Real-time Energy Management via Power Line and Internet) European project and resulted in the definition of REMPLI PLC. For achieving high network performance and real-time data transfer using medium voltage and low voltage electricity grids, major problems such as dynamic packet routing, quality of service management and real-time event reporting are addressed. We designed an efficient routing protocol to cope with dynamic electricity grid topology changes and to relay packets to reach the destination. REMPLI PLC performance is evaluated using simulations and complemented by analytic studies. It is proved that most of the application requirements can be satisfied by REMPLI PLC. We proposed and implemented a new traffic dispatcher providing differentiated quality of service for applications. Based on ALOHA protocol, some variants have been designed and evaluated for enabling efficient real-time event notification
Dans cette thèse, nous nous intéressons à la problématique liée à la communication numérique sur courant porteur dans l’objectif de fournir une infrastructure de communication qui permet la surveillance et le contrôle de la distribution et de la consommation de l’énergie. Ce travail a été effectué dans le cadre du projet européen REMPLI (Real-time Energy Management via Power Line and Internet) et a produit la spécification REMPLI PLC (Power Line Communication). Pour fournir une meilleure performance de la communication et effectuer le transfert de données en temps réel, en utilisant les réseaux électriques de moyenne tension et de basse tension, les problèmes principaux qui sont le routage dynamique de paquets de données, la gestion de la qualité de service et la notification des événement en temps réel, ont été traités. Nous avons développé un protocole de routage efficace pour s’adapter au changement dynamique de topologie du réseau électrique. Les performances de REMPLI PLC sont évaluées en utilisant des approches de simulation couplée avec des approches analytiques. Il est prouvé que la majorité des besoins applicatifs peuvent être satisfaite par REMPLI PLC. Nous avons proposé et implanté un nouvel “ordonnançeur de traffic” fournissant différents niveaux de qualité de service pour les applications. Des variantes de protocole ALOHA ont été proposées et évaluées afin de vérifier que les propriétés temps réel requises sur les notifications d’événements sont respectées
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ahmeda, Mohammad. "Earthing performance of transmission line towers." Thesis, Cardiff University, 2012. http://orca.cf.ac.uk/42730/.

Повний текст джерела
Анотація:
This work is primarily concerned with the performance of tower base earthing systems under AC variable frequency and transient conditions. The work has involved the investigation into the performance of practical earthing systems including tests on a full-size 275kV transmission tower base and corresponding calculation and numerical simulations.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Alavi, Hessam. "Acoustics of high performance transmission-line loudspeakers." Thesis, University of Southampton, 2016. https://eprints.soton.ac.uk/388041/.

Повний текст джерела
Анотація:
Acoustically treated, lined ducts are used in a wide range of applications, one of which is a transmission-line loudspeaker (TLL), which consists of a long, acoustically-lined, folded duct attached to the rear of the loudspeaker driver. Consequently, knowledge and understanding of sound propagation within acoustically treated ducts is essential in order to be able to create and analyse designs for the intended applications. The lowfrequency driver of a loudspeaker creates pressure fluctuations on both sides of the diaphragm. Therefore, a loudspeaker cabinet of some sort is required to control the sound radiation from the rear of the driver and to prevent the unwanted interference of those sounds with that radiated from the front of the loudspeaker. The transmission-line loudspeakers are however, designed and optimized to control this rear driver radiations by redirecting the pressure at the back of the driver and use them to extend the overall low-frequency response of the loudspeaker system. Transmission-line loudspeakers rely on the use of sound absorbing materials and, although attempts at modelling the performance of these have been reported in the literature, most transmission-line loudspeakers are designed empirically, using a combination of experience and trial-and-error. This project is concerned with creating and evaluating an engineering method of accurately modelling the sound propagating inside the transmission-line loudspeaker waveguides. Loudspeaker systems inherently suffer from an insufficient low-frequency response, due to their inefficiency at low-frequencies. Therefore, TLL rely on the use of sound absorbing materials added on their internal boundaries to extend their overall response of the loudspeaker at the lowfrequency region. The acoustic load on the driver and the sound radiated from the open end of the TLL duct both depend upon the propagation of sound through the duct; and the physical length of the duct determines the frequencies that can propagate within it. The addition of sound absorbing materials along the interior boundaries of the TLL reduces the speed of propagating sound within it, causing the TLL to respond such as having a much longer internal waveguide, consequently accommodating far lower frequencies within the TLL duct, extending the overall response of the loudspeaker system. The characteristics of sound propagation through a variety of two-dimensional and three-dimensional acoustically lined ducts at low-frequencies have been analyzed. Analytical models of straight ducts have been compared with the developed numerical models. In this research dissipative mufflers, that consist of ducts lined on the inside with an acoustically absorptive material, have been considered. Starting with the propagation of sound within hard-walled boundary condition ducts, this investigation moves to the modelling of waveguides treated with locally-reacting acoustic liners and next into the analysis of ducts treated with bulk-reacting acoustic absorbent materials; two kinds of excitations have been considered, namely pistonic and non-uniform excitation. The impedance mismatch and acoustic dissipation between the sound absorbing layer and the free propagation within the duct has been modelled numerically, and the results have been compared with the in-situ measurements conducted on a range of acoustically treated and purpose built transmission-line loudspeakers. A wide range of sound absorbing materials, namely fibrous and porous absorbers, have been characterized using their low-resistivity and acoustic impedance. Based on their individual characteristics, acoustical optimization was applied on a simple geometry U-shaped TLL duct.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Taylor, Gareth Andrew. "A high voltage transmission line for space power systems." Thesis, University of Newcastle Upon Tyne, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315620.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Chakrabarti, Abhimanyu. "Transmission line matrix modelling for semiconductor transport." Thesis, University of East Anglia, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338228.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Chen, Dian. "Transmission line modelling (TLM) of physical systems." Thesis, University of Sheffield, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.361632.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Power transmission line performance"

1

Benato, Roberto. EHV AC undergrounding electrical power: Performance and planning. London: Springer, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

United States. National Aeronautics and Space Administration., ed. Performance analysis of radiation cooled DC transmission lines for high power space systems. [Washington, DC]: National Aeronautics and Space Administration, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

J, Varma C. V., Lal P. K, and India. Central Board of Irrigation and Power., eds. Transmission line manual. New Delhi: Central Board of Irrigation and Power, 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Carcelle, Xavier. Power line communications in practice. Boston: Artech House, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Koch, Hermann. Gas insulated transmission line (GIL): A high power transmission technology. Hoboken, N.J: Wiley, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Switzer, Colleen A. Coaxial tube array space transmission line characterization. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Tartibi, Manoochehr. A controlled series capacitor scheme for power transmission line. Ottawa: National Library of Canada, 1993.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

C, Ferreira H., ed. Power line communications: Theory and applications for narrowband and broadband communications over power lines. Chichester, West Sussex, UK: Wiley, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Biological effects of transmission line fields. New York: Elsevier, 1987.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zelby, Leon W. Transmission line design for a power distribution system at 20 kHz for aircraft. Cleveland, Ohio: Lewis Research Center, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Power transmission line performance"

1

Rahmani-Andebili, Mehdi. "Problems: Transmission Line Model and Performance." In Power System Analysis, 53–57. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-84767-8_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Sil, Amitava, and Saikat Maity. "Characteristics and Performance of Transmission Line." In Industrial Power Systems, 57–64. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003231240-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Rahmani-Andebili, Mehdi. "Solutions of Problems: Transmission Line Model and Performance." In Power System Analysis, 59–68. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-84767-8_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Salam, Md Abdus. "Modeling and Performance of Transmission Lines." In Fundamentals of Electrical Power Systems Analysis, 197–248. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3212-2_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Kezunovic, Mladen, Sakis Meliopoulos, Vaithianathan Venkatasubramanian, and Vijay Vittal. "Transmission Line Fault Location." In Power Electronics and Power Systems, 143–74. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06218-1_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ardakani, M., G. Colavolpe, K. Dostert, H. C. Ferreira, D. Fertonani, T. G. Swart, A. M. Tonello, D. Umehara, and A. J. H. Vinck. "Digital Transmission Techniques." In Power Line Communications, 195–310. Chichester, UK: John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470661291.ch5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dostert, K., M. Girotto, L. Lampe, R. Raheli, D. Rieken, T. G. Swart, A. M. Tonello, A. J. H. Vinck, and S. Weiss. "Digital Transmission Techniques." In Power Line Communications, 261–385. Chichester, UK: John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781118676684.ch5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Abood, Samir I., and John Fuller. "Transmission Line Protection." In Power System Protection and Relaying, 199–234. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003394389-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Rahmani-Andebili, Mehdi. "Problems: Transmission Line Parameters." In Power System Analysis, 37–41. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-84767-8_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Sil, Amitava, and Saikat Maity. "Overhead Transmission Line Constants." In Industrial Power Systems, 29–40. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003231240-3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Power transmission line performance"

1

Payandehjoo, K., D. Kostka, and R. Abhari. "Analysis of Power Distribution Networks using Multiconductor Transmission Line Theory." In 2007 IEEE Electrical Performance of Electronic Packaging. IEEE, 2007. http://dx.doi.org/10.1109/epep.2007.4387179.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Rahman, M., J. A. Gillespie, M. Darveniza, and T. K. Saha. "Transmission line performance against lightning investigated using FLASH 1.81." In 2007 Australasian Universities Power Engineering Conference (AUPEC). IEEE, 2007. http://dx.doi.org/10.1109/aupec.2007.4548047.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Deotale, Surabhi, and Ashish A. Dongre. "Performance analysis of power differential based transmission line protection." In 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS). IEEE, 2017. http://dx.doi.org/10.1109/icecds.2017.8390073.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Rossi, J. O. "An analysis of the performance of linear transmission line transformers." In IEE Colloquium Pulsed Power '97. IEE, 1997. http://dx.doi.org/10.1049/ic:19970399.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Leite, E. J. S., F. V. Lopes, and K. M. Silva. "Performance evaluation of the phase comparison transmission line protection." In 2016 IEEE Power and Energy Society General Meeting (PESGM). IEEE, 2016. http://dx.doi.org/10.1109/pesgm.2016.7741495.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Kotchasarn, Chirawat. "Performance analysis of broadband power line communications with OFDM transmission." In 2017 19th International Conference on Advanced Communication Technology (ICACT). IEEE, 2017. http://dx.doi.org/10.23919/icact.2017.7890106.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mackow, Andrzej, and Mustafa Kizilcay. "Mitigation methods to improve the lightning performance of hybrid transmission line." In 2016 Power Systems Computation Conference (PSCC). IEEE, 2016. http://dx.doi.org/10.1109/pscc.2016.7540969.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zhidong Hua, Yongchen Wang, K. D. Mueller-Glaser, and O. Simon. "Channel modeling for and performance of contactless power-line data transmission." In International Symposium on Power Line Communications and Its Applications, 2005. IEEE, 2005. http://dx.doi.org/10.1109/isplc.2005.1430520.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Tyo, J. Scott, Michael C. Skipper, Michael D. Abdalla, Samuel P. Romero, and David V. Giri. "Performance limitations of transmission line oscillators for high powermesoband sources." In 2007 IEEE International Pulsed Power Plasma Science Conference (PPPS 2007). IEEE, 2007. http://dx.doi.org/10.1109/ppps.2007.4651843.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Tyo, J. Scott, Michael C. Skipper, Michael D. Abdalla, Samuel P. Romero, and David V. Giri. "Performance Limitations of Transmission Line Oscillators for High Power Mesoband Sources." In 2007 IEEE Pulsed Power Plasma Science Conference. IEEE, 2007. http://dx.doi.org/10.1109/ppps.2007.4345575.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Power transmission line performance"

1

Maxey. L51537 Power Line Fault Current Coupling to Nearby Natural Gas Pipelines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), November 1988. http://dx.doi.org/10.55274/r0010412.

Повний текст джерела
Анотація:
Electric and natural gas utilities often find it advantageous to share rights-of-way. Available methods for evaluating electrical effects on gas pipelines have been difficult to use at best, and at worst, incorrect. A generalized approach that addresses inductive and conductive interferences has not been available. Initiated to fill that need, this work is part of a research effort cosponsored by EPRI and the Pipe Line Research Council International, Inc. (PRCI) �A generalized approach to the analysis of the effects of transmission line faults on natural gas transmission pipelines has been developed and is presented in this report. A state of the art user-friendly computational tool has been developed and verified for the analysis of interference between electrical power lines and nearby buried or aboveground pipelines. This computer program, ECCAPP, is distinguished by its ability to model and analyze accurately complex, realistic interactions between pipelines and power lines, using easily obtained input data. The final report consists of three volumes. An independent fourth volume was also developed to simplify the installation of the ECCAPP software.Volume 1 contains the theory upon which the ECCAPP computer program is based. A parametric analysis and graphical charts have been formulated using ECCAPP to permit estimates to be made in the field or during preliminary analyses for situations that are not too complex. A discussion of various useful mitigation methods is included. The discussion is based on previous research work and on the results of the parametric analysis.Volume 2 is a detailed user's manual which describes not only how to use the program itself, but also which engineering data must be sought during an analysis and how to assimilate it into a computer model. A detailed sample problem is included. A detailed \Glossary of Terms\" used by ECCAPP as well as suitable input data forms to be filled by power line and pipeline engineers are provided in the appendices.Volume 3 discusses the modeling and performance of pipeline insulation or coating.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Hutsel, Brian Thomas, Brian S. Stoltzfus, William E. Fowler, Keith R. LeChien, Michael G. Mazarakis, James K. Moore, Thomas D. Mulville, et al. Millimeter-Gap Magnetically Insulated Transmission Line Power Flow Experiments. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1323370.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Nielsen, Lori, and Melissa Landon. Environmental Assessment: Gulf Power Company Military Point Transmission Line Project. Fort Belvoir, VA: Defense Technical Information Center, May 2014. http://dx.doi.org/10.21236/ada614335.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Hou, J., B. Liu, X. Tang, and C. Perkins. Transmission of IPv6 Packets over Power Line Communication (PLC) Networks. RFC Editor, January 2023. http://dx.doi.org/10.17487/rfc9354.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

N. Tucson Electric Power Company Sahuarita-Nogales Transmission Line Draft Environmental Impact Statement. Office of Scientific and Technical Information (OSTI), August 2003. http://dx.doi.org/10.2172/823241.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

N. Wallula Power Project and Wallula - McNary Transmission Line Project Final Environmental Impact Statement. Office of Scientific and Technical Information (OSTI), August 2002. http://dx.doi.org/10.2172/823293.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dabkowski, John. PR-151-634-R01 Power Line Fault Current Coupling Pipeline Coating Impedance. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), March 1988. http://dx.doi.org/10.55274/r0011923.

Повний текст джерела
Анотація:
Research into the induction and conduction coupling response of a pipeline co-located with an electric power transmission line to assess the high voltage coupling response under fault conditions. Capacitive discharge tests were performed on primarily fusion bonded epoxy and coal tar enamel coatings containing discrete individual holidays (circa 1985). A pipeline coating response model to high voltage stress was developed, but questions arose within the pipeline community as to the veracity of capacitate discharge coating testing when the coupling was from overhead alternating current electric power transmission lines.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Trench and Selig. L52132 The Safety Performance of Natural Gas Transmission and Gathering Systems. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), April 2003. http://dx.doi.org/10.55274/r0011107.

Повний текст джерела
Анотація:
This report provides a summary of the safety performance of the gas transmission pipeline systems from 1985 to 2001. This summary report is based on RSPA form 7100-2 for incidents involving Transmission and Gathering Operators, both intra and interstate. The number of incidents has fallen over the 1985-2001 period while gas consumption - and thus gas transported -- has increased. The result is a decline in the number of incidents per unit transported of nearly 40%. About 90% of the onshore incidents occur in unpopulated areas. Fatalities are uncommon and injuries have decreased by 50% over the 17-year period. The largest cause of onshore safety incidents is "Third Party Damage," where an excavator, contractor or farmer damages a line while working in its right-of-way.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Piesciorovsky, Emilio, Bruce Warmack, Jason Richards, and Yarom Polsky. Outdoor Test Bed Performance of a Power Line Sensor Using a Real-Time Event Simulator. Office of Scientific and Technical Information (OSTI), November 2022. http://dx.doi.org/10.2172/1899828.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

E Davis, B. Rasmussen. ON-Line Monitoring of Instrument Channel Performance: Volume 3: Applications to Nuclear Power Plant Technical Specification Instrumentation. Office of Scientific and Technical Information (OSTI), December 2004. http://dx.doi.org/10.2172/838285.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Power transmission line performance" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії