Готові списки джерел за темами / Polymer Nanocomposite coatings

Добірка наукової літератури з теми "Polymer Nanocomposite coatings"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Polymer Nanocomposite coatings".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Polymer Nanocomposite coatings"

1

Mathai, S., and P. S. Shaji. "Polymer-Based Nanocomposite Coating Methods: A Review." Journal of Scientific Research 14, no. 3 (September 1, 2022): 973–1002. http://dx.doi.org/10.3329/jsr.v14i3.58338.

Повний текст джерела
Анотація:
Coating technology is widely recognized as the most cost-effective and efficient method of preventing metal corrosion. Polymers have been regarded as a powerful coating material owing to their excellent barrier qualities, simplicity of modification, and large-scale production. Nanomaterials differ significantly from their physical and chemical properties, and have been hailed as highly promising functional materials in a wide range of applications, affecting nearly every aspect of science and technology. The addition of organic or inorganic nanofiller particles to polymer nanocomposite coatings may improve corrosion protection and lower the possibility of blistering or delamination. High hardness for polymer coatings, on the other hand, could be achieved by forming hard nanocrystalline phases inside the matrix. This article provides an overview of recent developments in polymer nanocomposite coatings in terms of their history, coating methods, properties, features, and drawbacks.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zhu, Yanrong, Sandeep Kottarath, Jude O. Iroh, and Richard A. Vaia. "Progressive Intercalation and Exfoliation of Clay in Polyaniline–Montmorillonite Clay Nanocomposites and Implication to Nanocomposite Impedance." Energies 15, no. 15 (July 25, 2022): 5366. http://dx.doi.org/10.3390/en15155366.

Повний текст джерела
Анотація:
Conducting polymers, such as polyaniline (PANi) and polypyrrole (PPy), and their nanocomposites, are desired in a wide range of applications, including supercapacitors, lithium ion battery, chemical sensors, biosensors, barrier thin films, and coatings, because of their interesting electrical and electrochemical properties. It is well known that the properties of polymer nanocomposites depend on their chemical structure, as well as their microstructure, yet scientists and engineers have not fully understood how to properly control the structure of polymer nanocomposites. In this study, it is shown that the structure of polyaniline–montmorillonite clay nanocomposites (PACN) can be controlled by varying the ammonium persulfate (APS, oxidant) concentration. The structure of polyaniline and Cloisite 20A clay are, therefore, profoundly affected during the synthesis of PACN nanocomposites. The thickness of polyaniline crystal decreased with increasing oxidant concentration. Fourier transform infrared spectroscopy (FTIR) was used to determine the oxidation state of PANi. The structure of the nanocomposites was studied by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), wide-angle X-ray diffraction (WAXD), wide-angle X-ray scattering (WAXS), and small-angle X-ray scattering (SAXS). Electrochemical impedance spectroscopy (EIS) analysis of polyimide nanocomposite coatings containing PACN with varying levels of intercalation and exfoliation indicate that the coating impedance decreased with exposure time for some coating systems. It is shown that polyimide–PACN nanocomposite coating containing highly intercalated clay was more durable and maintained constant impedance after 20 weeks of exposure in a corrosive medium.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sapsaliou, D. V., G. B. Melnikova, T. N. Tolstaya, and S. A. Chizhik. "Thin composite coatings based on gelatin with inorganic nanoparticles." Proceedings of the National Academy of Sciences of Belarus, Chemical Series 58, no. 3 (September 7, 2022): 325–33. http://dx.doi.org/10.29235/1561-8331-2022-58-3-325-333.

Повний текст джерела
Анотація:
A technique for the formation of gelatin thin films and composite coatings with silicon dioxide and zinc oxide nanoparticles by spin coating has been developed. New data of the morphology and structural characteristics of the formed gelatin and nanocomposite films were obtained by atomic force microscopy. The dependences of the roughness parameters of composite coatings on the content of silicon dioxide and zinc oxide nanoparticles in the polymer matrix are presented. It has been shown that the introduction of inorganic nanoparticles into the gelatin structure makes it possible to form nanocomposites with a rough surface. It has been established that the silicon dioxide nanoparticles incorporation leads to hydrophobization of the surface of polymer-inorganic films based on gelatin. Modification with zinc oxide nanoparticles (up to 8 mg per 1 mg of gelatin) improves the wettability of nanocomposite coatings with water.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tripathi, S. K., Jagdish Kaur, and Ramneek Kaur. "Photoluminescence Studies in II-VI Nanoparticles Embedded in Polymer Matrix." Defect and Diffusion Forum 357 (July 2014): 95–126. http://dx.doi.org/10.4028/www.scientific.net/ddf.357.95.

Повний текст джерела
Анотація:
Recently, organic-inorganic hybrid nanocomposite materials have been of great interest for their extraordinary performances due to the combination of the advantageous properties of polymers and the size dependent properties of nanocrystals (NCs). Interaction between the polymer matrix and nanocrystalline fillers produces wonderful features, viz. thermal, magnetic, mechanical, electrical and optical properties to these materials. Modern applications require a new design of responsive functional coatings which is capable of changing their properties in a controlled way. However, the synthesis of II-VI nanoparticles into the polymer matrix of its nanocomposites with adjustable sizes and protected from photo-oxidation is a big challenge to the scientific community. It is difficult to synthesize the highly enhanced luminescence in polymers and its semiconductor nanocomposite systems. Luminescence from the polymer embedded II-VI nanoparticles is greatly enhanced and better stability can be achieved from the composite compared to bulk materials. The formation of nanocomposites can be confirmed by photoluminescence (PL) spectroscopy. It is an important technique for determining the optical gap, purity, crystalline quality defects and analysis of the quantum confinement in these nanocomposite materials. In this paper, we have reviewed the present status of II-VI polymer nanocomposites from the photoluminescence studies point of view. We have also shown the results of the PL of these nanocomposite materials and the results will be compared with the reported literature by other groups.Contents of Paper
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Kausar, Ayesha. "Polymeric nanocomposites reinforced with nanowires: Opening doors to future applications." Journal of Plastic Film & Sheeting 35, no. 1 (August 15, 2018): 65–98. http://dx.doi.org/10.1177/8756087918794009.

Повний текст джерела
Анотація:
This article presents a state-of-the-art overview on indispensable aspects of polymer/nanowire nanocomposites. Nanowires created from polymers, silver, zinc, copper, nickel, and aluminum have been used as reinforcing agents in conducting polymers and non-conducting thermoplastic/thermoset matrices such as polypyrrole, polyaniline, polythiophene, polyurethane, acrylic polymers, polystyrene, epoxy and rubbers. This review presents the combined influence of polymer matrix and nanowires on the nanocomposite characteristics. This review shows how the nanowire, the nanofiller content, the matrix type and processing conditions affect the final nanocomposite properties. The ensuing multifunctional polymer/nanowire nanocomposites have high strength, conductivity, thermal stability, and other useful photovoltaic, piezo, and sensing properties. The remarkable nanocomposite characteristics have been ascribed to the ordered nanowire structure and the development of a strong interface between the matrix/nanofiller. This review also refers to cutting edge application areas of polymer/nanowire nanocomposites such as solar cells, light emitting diodes, supercapacitors, sensors, batteries, electromagnetic shielding materials, biomaterials, and other highly technical fields. Modifying nanowires and incorporating them in a suitable polymer matrix can be adopted as a powerful future tool to create useful technical applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Esquivel, Reynaldo, Iván Canale, Maricela Ramirez, Pedro Hernández, Paul Zavala-Rivera, Enrique Álvarez-Ramos, and Armando Lucero-Acuña. "Poly(N-isopropylacrylamide)-coated gold nanorods mediated by thiolated chitosan layer: thermo-pH responsiveness and optical properties." e-Polymers 18, no. 2 (February 23, 2018): 163–74. http://dx.doi.org/10.1515/epoly-2017-0135.

Повний текст джерела
Анотація:
AbstractA core-shell of colloidal metal-responsive polymer provides an innovative model in functional materials. These core-shell nanocomposites offer the possibility to control some properties, such as particle size, surface plasmon resonance and morphology. In this research, we demonstrate the successful synthesis and functionality of gold nanorods (GNR) coated with the polymers chitosan (Ch) and poly(N-isopropylacrylamide) (PNIPAM). The polymer coatings are performed using a two-step method. First, GNR were coated with a thiolated chitosan (GNR-Ch) by replacing hexadecyltrimethylammonium bromide with a chitosan thiomer. Structural modification of GNR-Ch was monitored by Fourier transform infrared spectroscopy. Then a second polymeric coating was done by in situ free radical polymerization of N-isopropylacrylamide (NIPAM) on GNR-Ch to obtain the nanocomposite GNR-Ch-PNIPAM. The nanocomposite average size was analyzed by dynamic light scattering. The evolution of ζ potentials during the coatings was measured using electrophoretic mobility. GNR-Ch-PNIPAM presented a collapsed structure when heated above the lower critical solution temperature. The particle size of GNR-Ch-PNIPAM was manipulated by changing the pH. Plasmonic properties were evaluated by UV-Vis spectroscopy. Results showed an important blue shift due to the PNIPAM coating thickness. Thermo- and pH-responsive properties of the nanocomposite GNR-Ch-PNIPAM could be used as a drug delivery system.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kausar, Ayesha, Ishaq Ahmad, and Patrizia Bocchetta. "High-Performance Corrosion-Resistant Polymer/Graphene Nanomaterials for Biomedical Relevance." Journal of Composites Science 6, no. 12 (December 1, 2022): 362. http://dx.doi.org/10.3390/jcs6120362.

Повний текст джерела
Анотація:
Initially, pristine polymers were used to develop corrosion-resistant coatings. Later, the trend shifted to the use of polymeric nanocomposites in anti-corrosion materials. In this regard, graphene has been identified as an important corrosion-resistant nanomaterial. Consequently, polymer/graphene nanocomposites have been applied for erosion protection applications. Among polymers, conducting polymers (polyaniline, polypyrrole, polythiophene, etc.) and nonconducting polymers (epoxy, poly(methyl methacrylate), etc.) have been used as matrices for anticorrosion graphene nanocomposites. The corrosion-resistant polymer/graphene nanocomposites have found several important applications in biomedical fields such as biocompatible materials, biodegradable materials, bioimplants, tissue engineering, and drug delivery. The biomedical performance of the nanomaterials depends on the graphene dispersion and interaction with the polymers and living systems. Future research on the anti-corrosion polymer/graphene nanocomposite is desirable to perceive further advanced applications in the biomedical arenas.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Weththimuni, Maduka L., Marwa Ben Chobba, Donatella Sacchi, Mouna Messaoud, and Maurizio Licchelli. "Durable Polymer Coatings: A Comparative Study of PDMS-Based Nanocomposites as Protective Coatings for Stone Materials." Chemistry 4, no. 1 (January 29, 2022): 60–76. http://dx.doi.org/10.3390/chemistry4010006.

Повний текст джерела
Анотація:
Nowadays, durable protective coatings receive more attention in the field of conservation for several reasons (they are cost effective, time consuming, more resistance, etc.). Hence, this study was focused on producing a multi-functional, durable coating to protect different stone materials, especially, Lecce stone, bricks, and marble. For this purpose, ZrO2-doped-ZnO-PDMS nanocomposites (PDMS, polydimethylsiloxane used as the binder) were synthesized by in situ reaction (doped nanoparticles were inserted into the polymer matrix during the synthesis of PDMS) and the performances of resulting coatings were examined by handling different experimental analyses. In particular, the study aimed to evaluate the durability properties of the coating along with the self-cleaning effect. As a result, the durability of the nanocomposite coating with respect to the well-known PDMS coating was assessed after exposure to two different ageing cycles: solar ageing (300 W, 1000 h) and humid chamber ageing (RH > 80%, T = 22 ± 3 °C, desiccator, 2 years). All the results were in good agreement with each other providing that newly prepared nanocomposite coating can be used as a durable protective coating for different stone materials.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Bahramnia, Hamed, Hamidreza Mohammadian Semnani, Ali Habibolahzadeh, and Hassan Abdoos. "Epoxy/polyurethane nanocomposite coatings for anti-erosion/wear applications: A review." Journal of Composite Materials 54, no. 22 (March 12, 2020): 3189–203. http://dx.doi.org/10.1177/0021998320908299.

Повний текст джерела
Анотація:
Offshore pipelines are vulnerable against erosion/wear deterioration mechanisms that can be controlled through the use of proper surface coatings, such as polymer matrix nano-composite (PMNC) coatings that are well-known for their ease of production, availability and applicability. Epoxy, as a versatile rigid and brittle resin and polyurethane with proper chemical/mechanical properties, are potential candidates to make the matrix of these composites. A combination of these polymers can also enhance the mechanical behaviors, glass transition temperature and flexibility. In addition, the desired coating characteristics, such as adhesion to metal substrate, mechanical properties, erosion/wear resistivity and UV absorbance, can be further improved through the addition of appropriate nanoparticles within the polymer matrix. Especially, nanoparticles can improve the erosion/wear resistance of polymers because of establishing high strength bonds between the polymer chains and the reinforcements besides enhancing other required properties. The present work is a review on PMNC coatings that contain epoxy, polyurethane or EP/polyurethane as a polymer matrix along with the details of the nanoparticle reinforcements, such as alumina, silica, titanium oxide, zinc oxide, clay and carbon-based materials. The effect of these nanoparticles on the properties of composite coatings has also been investigated.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Dao, Phi Hung, Trinh Van Thanh, Nguyen Anh Hiep, Nguyen Thien Vuong, Mac Van Phuc, and Dang Thi My Linh. "EFFECT OF ZNO NANOPARTICLES ON PROPERTIES OF NANOCOMPOSITE COATING BASED ON ACRYLIC POLYMER EMULSION AND GRAPHENE OXIDE." Vietnam Journal of Science and Technology 59, no. 3 (May 17, 2021): 290. http://dx.doi.org/10.15625/2525-2518/59/3/15751.

Повний текст джерела
Анотація:
Effect of ZnO nanoparticles on nanocomposite coatings based on R4152 and graphene oxide (GO) was studied.In presence of 2%wt. ZnO nanoparticle, abrasion resistance of coating increased by nearly 25% (from 75 to 92.9 L/mil) and temperature decomposition raised by 18oC. SEM images showed that nano ZnO can disperse homogenously in polymer matrix in presence of GO. Hence, photocatalytic activity of R4152/GO/ZnO nanocomposite coating was higher than that of R4152/ZnO nanocomposite coating. After 14 hours UV exposure, R4152/GO/ZnO nanocomposite coating can degrade over 80% methylene blue coated on its surface while 60% methylene blue was degraded by R4152/ZnO coatings.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Polymer Nanocomposite coatings"

1

Brandt, Jennifer M. "Rheological and abrasion resistant properties of transparent polymer/silicate nanocomposite coatings." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0010040.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Eaves, Elizabeth. "Soft-soft nanocomposite coating materials produced by emulsion polymerisation." Thesis, University of Manchester, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.654865.

Повний текст джерела
Анотація:
This thesis reports on the challenge of applying an innovative ‘soft-soft nanocomposite’ design strategy to establish synthesis parameters that affect the performance of coatings based upon water-borne latexes, which is driven by the environmental and legislative need to develop feasible alternatives to solvent-borne coatings. A framework emulsion polymerisation formulation to synthesise core-shell latexes with (poly[(butyl acrylate)-co-(butyl methacrylate)]) core and (poly[(butyl acrylate)-co-(butyl methacrylate)-co-(diacetone acrylamide)]) shell copolymer phases in a controlled manner was established, with high monomer conversions and approximately constant particle numbers. Retention of particle morphology in the films was confirmed using atomic force microscopy (AFM). The effect of adding adipic acid dihydrazide to the latex post-polymerisation to facilitate crosslinking of the shell phase during film formation was found to have a significant effect on the stress-strain properties of latex films. A core:shell mass ratio of 80:20 was found to be optimum in all crosslinked systems tested. Increasing the amount of crosslinking in the shell phase of the particles was found to have an effect on the large strain tensile properties of films, leading to strain hardening with reduced extension to break and higher failure stresses at higher crosslinker levels. Core phase copolymer Tg had a very significant effect upon the low strain mechanical properties, with Young’s modulus values of 5-180 MPa being accessible in the range of core Tg¬s from 5 – 25 oC, although little difference in mechanical behaviour was seen when varying the shell phase Tg from 5 – 15 oC. Adding 2 wt% methacrylic acid (MAA) to the shell phase copolymer gave an additional improvement in the low strain tensile region, with a Young’s modulus of 425 MPa being realised. However, it was found that additional amounts of MAA (up to 5 wt% in the shell phase) were deterious to film properties, with low Young’s modulus and poor extensibility. This was interpreted as being due to an increased concentration of ionomeric crosslinks restricting interparticle chain diffusion and keto-hydrazide crosslinking. Studies to evaluate the mechanical performance of soft-soft nanocomposite films compared to binder latexes used in commercial products were favourable, and showed that a high level of versatility with regards to mechanical properties is possible.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Beemat, Jaspreet S. "Processing and Properties of Hybrid Silane-Epoxy Nanocomposite Coatings." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1352992819.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Shabani-Nooshabadi, M., and Y. Jafari. "Electropolymerized Coatings of Poly (o-anisidine) and Poly (o-anisidine)-TiO2 Nanocompsite on Aluminum Alloy 3004 by using the Galvanostatic Method and Their Corrosion Protection Performance." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34811.

Повний текст джерела
Анотація:
Poly (o-anisidine) (POA) and also poly (o-anisidine)-TiO2 (POA-TiO2) nanocomposite coatings on aluminum alloy 3004 (AA3004) have been investigated by using the galvanostatic method. The electrosynthesized coatings were characterized by FT-IR, SEM- EDX, SEM and AFM. The corrosion protection performances of POA and also POA-TiO2 nanocomposite coatings were investigated in 3.5% NaCl solution by using the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The corrosion rate of nanocomposite coatings was found ∼900 times lower than bare AA3004. The results of this study clearly ascertain that the POA-TiO2 nanocomposite has outstanding potential to protect the AA3004 against corrosion. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/34811
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Jafarzadeh, Shadi. "Functional composite coatings containing conducting polymers." Doctoral thesis, KTH, Yt- och korrosionsvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-155132.

Повний текст джерела
Анотація:
Organic coatings are widely used to lower the corrosion rate of metallic structures. However, penetration of water, oxygen and corrosive ions through pores present in the coating results in corrosion initiation and propagation once these species reach the metal substrate. Considering the need for systems that offer active protection with self-healing functionality, composite coatings containing polyaniline (PANI) conducting polymer are proposed in this study. In the first phase of my work, PANI was synthesized by various methods and characterized. The rapid mixing synthesis method was chosen for the rest of this study, providing PANI with high electrical conductivity, molecular structure of emeraldine salt, and morphology of spherical nanoparticles. PANIs doped with phosphoric and methane sulfonic acid revealed hydrophilic nature, and I showed that by incorporating a long-chain alkylphosphonic acid a hydrophobic PANI could be prepared. The second phase of my project was dedicated to making homogenous dispersions of PANI in a UV-curable resin based on polyester acrylate (PEA). Interfacial energy studies revealed the highest affinity of PEA to PANI doped with phosphoric acid (PANI-PA), and no attractive or long-range repulsive forces were measured between the PANI-PA surfaces in PEA.This is ideal for making conductive composites as, along withno aggregation tendency, the PANI-PA particles might come close enough to form an electrically connected network. Highly stable PEA/PANI-PA dispersions were prepared by pretreatment of PANI-PA in acetone followed by mixing in PEA in small portions under pearl-milling. The third phase of my project dealt with kinetics of the free radical polymerization that was utilized to cure the PEA/PANI-PA mixture. UV-vis absorption studies suggested a maximum allowed PANI-PA content of around 4 wt.% in order not to affect the UV curing behavior in the UV-C region. Real-time FTIR spectroscopy studies, using a laboratory UV source, revealed longer initial retardation of the photocuring and lower rates of crosslinking reactions for dispersions containing PANI-PA of higher than 3 wt.%. The presence of PANI-PA also made the formulations more sensitive to changes in UV light intensity and oxygen inhibition during UV curing. Nevertheless, curing of the dispersions with high PANI-PA content, of up to 10 wt.%, was demonstrated to be possible at either low UV light intensities provided the oxygen replenishment into the system was prevented, or by increasing the UV light intensity to very high levels. In the last phase of my project, the PEA and PEA/PANI-PA coatings, cured under high intensity UV lamps, were characterized. SEM analysis showed small PANI-PA particles to be closely packed within the matrix, and the electrical conductivity of the composite films was measured to be in the range of semiconductors. This suggested the presence of a connected network of PANI-PA, as confirmed by investigations of mechanical and electrical variations at the nanoscale by PeakForce TUNA AFM. The data revealed the presence of a PEA-rich layer at the composite-air interface, and a much higher population of the conductive network within the polymer matrix. High current signal was correlated with a high elastic modulus, consistent with the level measured for PANI-PA, and current-voltage studies on the conductive network showed non-Ohmic characteristics. Finally, the long-term protective property of the coatings was characterized by OCP and impedance measurements. Short-term barrier-type corrosion protection provided by the insulating PEA coating was turned into a long-term and active protection by addition of as little as 1 wt.% PANI-PA. A large and stable ennoblement was induced by the coatings containing PANI-PA of up to 3 wt.%. Higher content of PANI-PA led to poorer protection, probably due to the hydrophilicity of PANI-PA facilitating water transport in the coating and the presence of potentially weaker spots in the film. An iron oxide layer was found to fully cover the metal surface beneath the coatings containing PANI-PA after final failure observed by electrochemical testing.

QC 20141103

Стилі APA, Harvard, Vancouver, ISO та ін.
6

Rosidian, Aprillya. "Nanocomposite of ZrO2/Polymer Thin-Film Coatings by the Ionically Self-Assembled Monolayer Technique." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36560.

Повний текст джерела
Анотація:
Nanocomposites of multilayer structures of zirconia/polymer thin-film coatings have been fabricated on quartz and single-crystal silicon substrates by the Ionically Self-Assembled Monolayer (ISAM) technique. Particle size distribution was measured to calculate the grain diameter of the zirconia particles. UV/Vis spectroscopy and ellipsometry were used to characterize the ISAM technique. SEM and AFM were used to observe the microscopic structure of the multilayer structures. Some mechanical properties were characterized by adhesion, abrasion, and nano-hardness tests. It was shown that an important distinction of this novel technique over conventional coating processes is the fabrication of excellent molecular-level uniform films with precise control of film thickness at the à ngström-level at ambient temperature and pressure conditions. It was also shown the maximum Vickers microhardness of ZrO2/polymer nanocomposite thin-film coatings prepared by this method was greater than 25 GPa.
Master of Science
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Yang, Hongjiang. "Synthesis, Processing and Characterization of Polymer Derived Ceramic Nanocomposite Coating Reinforced with Carbon Nanotube Preforms." Master's thesis, University of Central Florida, 2014. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/6387.

Повний текст джерела
Анотація:
Ceramics have a number of applications as coating material due to their high hardness, wear and corrosion resistance, and the ability to withstand high temperatures. Critical to the success of these materials is the effective heat transfer through a material to allow for heat diffusion or effective cooling, which is often limited by the low thermal conductivity of many ceramic materials. To meet the challenge of improving the thermal conductivity of ceramics without lowering their performance envelope, carbon nanotubes were selected to improve the mechanical properties and thermal dispersion ability due to its excellent mechanical properties and high thermal conductivity in axial direction. However, the enhancements are far lower than expectation resulting from limited carbon nanotube content in ceramic matrix composites and the lack of alignment. These problems can be overcome if ceramic coatings are reinforced by carbon nanotubes with good dispersion and alignment. In this study, the well-dispersed and aligned carbon nanotubes preforms were achieved in the form of vertically aligned carbon nanotubes (VACNTs) and Buckypaper. Polymer derived ceramic (PDC) was selected as the matrix to fabricate carbon nanotube reinforced ceramic nanocomposites through resin curing and pyrolysis. The SEM images indicates the alignment of carbon nanotubes in the PDC nanocomposites. The mechanical and thermal properties of the PDC nanocomposites were characterized through Vickers hardness measurement and Thermogravimetric Analysis. The ideal anisotropic properties of nanocomposites were confirmed by estimating the electrical conductivity in two orthogonal directions.
M.S.M.E.
Masters
Mechanical and Aerospace Engineering
Engineering and Computer Science
Mechanical Engineering; Mechanical Systems Track
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Tong, Zhaohui. "Water-based suspension of polymer nanoclay composite prepared via miniemulsion polymerization." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19763.

Повний текст джерела
Анотація:
Thesis (Ph.D)--Chemical Engineering, Georgia Institute of Technology, 2008.
Committee Chair: Yulin Deng; Committee Member: Howard (Jeff) L. Empie; Committee Member: J. Carson Meredith; Committee Member: Jeffery S. Hsieh; Committee Member: Timothy Patterson.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Santese, Francesca. "Molecular modeling of multi-functional nanostructured materials and coatings." Doctoral thesis, Università degli studi di Trieste, 2014. http://hdl.handle.net/10077/9974.

Повний текст джерела
Анотація:
2012/2013
Materiali e rivestimenti nanostrutturati possono potenzialmente apportare significativi cambiante nel campo della nanoscienze, nonché offrire una nuova generazione di materiali con caratteristiche e performance migliori. A questo proposito le tecniche computazionali diventano uno strumento fondamentale, in grado di ridurre notevolmente i tempi che vanno dall’idea iniziale al prodotto finito. La simulazione molecolare permette infatti la previsione delle proprietà macroscopiche prima che i materiali vengano preparati e caratterizzati sperimentalmente; consente inoltre una migliore comprensione dei fenomeni fisici su scala nanometrica. In questo lavoro di tesi sono presentati alcuni casi studio in cui vengono proposte diverse procedure computazionali per affrontare importanti aspetti come la bagnabilità della superficie, l’effetto della dimensione e della forma delle nanoparticelle e i loro meccanismi di aggregazione/dispersione. In questo contesto, si è dimostrata la vasta applicabilità della modellazione molecolare evidenziando quindi come questa rappresenti un potente strumento per comprendere e controllare le proprietà finali di materiali nanostrutturati, aprendo così la strada ad una progettazione in silico di nuovi materiali.
Nanostructured materials and coatings have the potential to change materials science significantly, as well as to provide a new generation of materials with a quantum improvement in properties. In this regard computational materials science becomes a powerful tool. It is able to rapidly reduce the time from concept to end product. Molecular simulation enables the prediction of properties of these new materials before preparation, processing, and experimental characterization, as well as a better understanding of the physical phenomena at the nanoscale level. In this thesis we present several study cases in which we propose different computational recipes to deal with different important topics such as surface wettability, effect of nanoparticles size and shape and nanoparticles aggregation/dispersion. In this context, we demonstrate the broad applicability of the molecular modelling and we ascertain that molecular simulation represent a powerful tool to understand and control the nanomaterials properties thus opening avenues for the in silico design of new materials.
XXVI Ciclo
1985
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Xu, Jianhua. "Rheology of polymeric suspensions polymer nanocomposites and waterborne coatings /." Columbus, Ohio : Ohio State University, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1127317214.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Polymer Nanocomposite coatings"

1

K, Schlarb Alois, ed. Tribology of polymeric nanocomposites: Friction and wear of bulk materials and coatings. Oxford: Elsevier, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Biological and biomedical coatings: Processing and characterization. Boca Raton: Taylor & Francis, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mittal, Vikas. Polymer Nanocomposite Coatings. Taylor & Francis Group, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Mittal, Vikas. Polymer Nanocomposite Coatings. Taylor & Francis Group, 2016.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mittal, Vikas. Polymer Nanocomposite Coatings. Taylor & Francis Group, 2016.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Polymer Nanocomposite Coatings. Taylor & Francis Group, 2013.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mittal, Vikas. Polymer Nanocomposite Coatings. Taylor & Francis Group, 2016.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Mittal, Vikas. Polymer Nanocomposite Coatings. Taylor & Francis Group, 2016.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Mittal, Vikas. Polymer Nanocomposite Coatings. Taylor & Francis Group, 2013.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Hussain, Chaudhery Mustansar, Mayank Pandey, and Kalim Deshmukh. Polymer Nanocomposite Films and Coatings: Processes, Fundamental Properties and Applications. Elsevier Science & Technology, 2024.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Polymer Nanocomposite coatings"

1

Jena, Hemalata, and Sudesna Roy. "Polymer Nanocomposite Coatings." In Polymer Nanocomposites, 95–108. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003343912-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kumar, A. Madhan. "Polymer Nanocomposite Coatings." In Advances in Corrosion Control of Magnesium and its Alloys, 339–54. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003319856-23.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ji, S., H. Gui, G. Guan, M. Zhou, Q. Guo, and M. Y. J. Tan. "Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites." In Lecture Notes in Civil Engineering, 113–25. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_14.

Повний текст джерела
Анотація:
AbstractWaterborne coatings with intended functionalities have been designed by manipulating acrylic-based nanocomposites with different nanostructures. Taking advantage of the favorable structure of acrylic copolymers, three waterborne coatings with various desired properties were created through molecular engineering either by copolymerizing with other components or through nanocomposite formation. This approach was demonstrated by synthesizing acrylic-based waterborne coatings with three different nanostructures, namely homogeneous, worm-like, and spherical-like nanostructures. The properties of coating samples prepared by this new approach and by traditional physical blending were compared experimentally, which revealed that the incorporation of 3-methacryloxypropyltrimethoxysilane (MPS)-modified nanoparticle TiO2 in an acrylic base enabled the formation of a nanocomposite with nanoparticles uniformly distributed in the acrylic base. The coating film with this acrylic-TiO2 nanocomposite showed significantly better UV absorption performance than the coating made by physical blending. The copolymerization of acrylic copolymers with an organic polymer (alkyd) created a worm-like nanostructure of acrylic–alkyd composite that allowed uniform distribution of the acrylic–alkyd nanocomposite in a more closely packed dense coating film, leading to enhanced barrier property and significantly improved corrosion resistance as confirmed by electrochemical impedance spectroscopy and salt spray tests. The copolymerization of acrylic monomers with an inorganic polymer (polydimethylsiloxane [PDMS]) led to a spherical-like nanostructure of acrylic–PDMS composite film. The formation of this nanostructure arose from the migration of PDMS segments, and a PDMS-rich phase formed on the film’s surface, which resulted in a coating film with PDMS functionalities such as low dirt-picking behavior. Overall, these three cases demonstrated that acrylic copolymer are an excellent base for developing various nanocomposite waterborne coatings with different functionalities through copolymerization and that the nanocomposites with different nanostructures have a significant influence on the coatings’ performance.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zhou, Shuxue, and Limin Wu. "Transparent Organic-Inorganic Nanocomposite Coatings." In Functional Polymer Coatings, 1–70. Hoboken, NJ: John Wiley & Sons, Inc, 2015. http://dx.doi.org/10.1002/9781118883051.ch1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Bermúdez, M. D., F. J. Carrión, C. Espejo, J. Sanes, and G. Ojados. "Tribology of Bulk Polymer Nanocomposites and Nanocomposite Coatings." In Materials Forming, Machining and Tribology, 1–18. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33882-3_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Nazari, Mehdi Honarvar, and Xianming Shi. "Polymer-Based Nanocomposite Coatings for Anticorrosion Applications." In Industrial Applications for Intelligent Polymers and Coatings, 373–98. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-26893-4_18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Cakmak, Hulya, and Ece Sogut. "Functional Biobased Composite Polymers for Food Packaging Applications." In Reactive and Functional Polymers Volume One, 95–136. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43403-8_6.

Повний текст джерела
Анотація:
AbstractBiobased polymers are of great interest due to the release of tension on non-renewable petroleum-based polymers for environmental concerns. However, biobased polymers usually have poor mechanical and barrier properties when used as the main component of coatings and films, but they can be improved by adding nanoscale reinforcing agents (nanoparticles - NPs or fillers), thus forming nanocomposites. The nano-sized components have a larger surface area that favors the filler-matrix interactions and the resulting material yield. For example, natural fibers from renewable plants could be used to improve the mechanical strength of the biobased composites. In addition to the mechanical properties, the optical, thermal and barrier properties are mainly effective on the selection of type or the ratio of biobased components. Biobased nanocomposites are one of the best alternatives to conventional polymer composites due to their low density, transparency, better surface properties and biodegradability, even with low filler contents. In addition, these biomaterials are also incorporated into composite films as nano-sized bio-fillers for the reinforcement or as carriers of some bioactive compounds. Therefore, nanostructures may provide antimicrobial properties, oxygen scavenging ability, enzyme immobilization or act as a temperature or oxygen sensor. The promising result of biobased functional polymer nanocomposites is shelf life extension of foods, and continuous improvements will face the future challenges. This chapter will focus on biobased materials used in nanocomposite polymers with their functional properties for food packaging applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Kasisomayajula, Subramanyam, Niteen Jadhav, and Victoria Johnston Gelling. "Recent Advances in Polymer Nanocomposite Coatings for Corrosion Protection." In Advances in Nanostructured Composites, 241–77. Boca Raton, FL : CRC Press, Taylor & Francis Group, [2018] | Series: Advances in nanostructured composites ; volume 2 | “A science publishers book.»: CRC Press, 2019. http://dx.doi.org/10.1201/9780429021718-12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Irfan, Mohd, Halima Khatoon, Rabia Kouser, Abu Darda, Shahidul Islam Bhat, and Sajid Iqbal. "Renewable Resource-Based Environmental Friendly Waterborne Polymeric Anticorrosive Nanocomposite Coatings." In Green Polymer Chemistry and Composites, 95–111. First edition.: Apple Academic Press, 2021. http://dx.doi.org/10.1201/9781003083917-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Amiri, Sahar, and Seyed Armin Zare Estekhraji. "Sol–Gel Preparation and Characterization of Antibacterial and Self-cleaning Hybrid Nanocomposite Coatings." In Eco-friendly and Smart Polymer Systems, 184–88. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45085-4_44.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Polymer Nanocomposite coatings"

1

Blacker, Richard S., K. L. Lewis, I. Sage, I. Mason, and K. Webb. "Optically isotropic polymer / liquid crystal hybrid filters." In Optical Interference Coatings. Washington, D.C.: Optica Publishing Group, 1997. http://dx.doi.org/10.1364/oic.1998.the.5.

Повний текст джерела
Анотація:
Commercially available polymer dispersed liquid crystal (PDLC) systems act as scatter mode devices in which discrete liquid crystal droplets (whose dimensions are greater than λ/10) scatter incident light when the liquid crystal units are randomly aligned, but when aligned by an applied electric field become transmissive1. The reduced scattering is due to two non-competitive effects: a reduction in refractive index to match that of the host polymer, and an alignment of the liquid crystal units. The current work has developed a system where the initial size of the discrete liquid crystal droplets is below the visible light scattering limit. This hybrid PDLC system remains optically isotropic irrespective of the applied electric field strength. This novel nanocomposite has been incorporated into etalon cavities where it is utilised as an electrooptic spacer layer, thus enabling a frequency tuneable filter to be realised.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Twardowski, T. E., M. Reilly, and R. Knight. "Properties of HVOF Sprayed Multi-Scale Polymer/Silica Nanocomposite Coatings." In ITSC2001, edited by Christopher C. Berndt, Khiam A. Khor, and Erich F. Lugscheider. ASM International, 2001. http://dx.doi.org/10.31399/asm.cp.itsc2001p0369.

Повний текст джерела
Анотація:
Abstract The high velocity oxy-fuel (HVOF) combustion spray technique has previously been shown to be an excellent solution for depositing crystalline matrix nano-reinforced polymer coatings. The use of multiple scales of reinforcement is expected to improve the load transfer from the larger reinforcing particles to the matrix through the mediation of the smaller particles. The initial step in developing multi-scale coatings is studying the effects of reinforcement size on distribution and properties. Nylon 11 coatings filled with silica particulates of 7 nm, 20 nm, 10µm and 100µm have been produced using the high velocity oxy-fuel (HVOF) combustion spray process. The physical properties and microstructure have been evaluated as a function of the reinforcement size. Nylon 11 was co-milled with the fillers to a 10% volume fraction. The filler was agglomerated at the splat boundaries in the final coating microstructures. All filled coatings had significant changes in x-ray pattern relative to pure nylon 11 coatings, indicative of both increased crystallinity and changes in crystal structure. Coatings containing the smallest reinforcements exhibited improvements of 40 % in scratch and 84 % in wear resistance above those containing the largest reinforcement particles in coatings with nominal 10 vol. % of hydrophobic silica. This increase appeared to be primarily due to filler addition and increased matrix crystallinity.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Singaravalu, S., D. C. Mayo, H. K. Park, K. E. Schriver, and R. F. Haglund. "Anti-reflective polymer-nanocomposite coatings fabricated by RIR-MAPLE." In SPIE LASE, edited by Xianfan Xu, Guido Hennig, Yoshiki Nakata, and Stephan W. Roth. SPIE, 2013. http://dx.doi.org/10.1117/12.2007537.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Knight, R., X. Fang, and T. E. Twardowski. "Structure and Properties of HVOF Sprayed Amorphous Polymer Matrix Nanocomposite Coatings." In ITSC2001, edited by Christopher C. Berndt, Khiam A. Khor, and Erich F. Lugscheider. ASM International, 2001. http://dx.doi.org/10.31399/asm.cp.itsc2001p0361.

Повний текст джерела
Анотація:
Abstract The high velocity oxy-fuel [HVOF] combustion spray technique has previously been shown to be an excellent solution for depositing crystalline matrix nano-reinforced polymer coatings. Dense polymer coatings can be produced by controlling both the particle dwell time in the HVOF jet and through substrate thermal management. Use of an amorphous matrix material, polycarbonate, will enable the role of matrix crystallinity on the structure and properties of thermally sprayed polymer matrix nanocomposite coatings to be separated from effects resulting from the reinforcing phase. An amorphous, commercial polycarbonate powder with a broad particle size distribution and irregular particle morphology has been successfully deposited by HVOF spraying using hydrogen as fuel gas. Polycarbonate matrix coatings up to 18 mils thick with zero to 10 vol. % loadings of nano-sized hydrophobic and hydrophilic silica, and carbon-black have been sprayed onto Al substrates. Results from optical microscopy. X-ray diffraction, scratch, density, microhardness and dilute-solution viscometry measurements will be presented. These indicate that incorporation of the nanosized filers improved the scratch resistance and microhardness of the coatings by 50 % and 23 %, respectively, relative to sprayed pure polymer. Some degradation of the polymer matrix was also detected, with molecular weight being reduced from 17,000 in the feedstock to ~5,000 in the sprayed deposits. The influence of variations in process parameters such as fuel:oxygen ratio, total gas flow, spray distance, nozzle length, total travel distance, and spray distance/nozzle length ratio on coating structure will also be addressed. The threshold loading of silica in the polycarbonate matrix for which dense coatings can be obtained has also been determined.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Petrovicova, E., R. Knight, R. W. Smith, and L. S. Schadler. "Structure and Properties of HVOF Sprayed Ceramic/Polymer Nanocomposite Coatings." In ITSC 1997, edited by C. C. Berndt. ASM International, 1997. http://dx.doi.org/10.31399/asm.cp.itsc1997p0877.

Повний текст джерела
Анотація:
Abstract Ceramic/polymer nanocomposites promise to be a new class of materials that will have wide application either for surface protection, providing low friction and inert corrosion barriers, or where tailored electrical and magnetic properties with increased abrasion and wear resistance are required. The high velocity oxy-fuel (HVOF) combustion spray process has been used to successfully process polymer-ceramic nanocomposites at 5 - 20 volume % of reinforcement. The latest results of process-structure- property relationship studies in silica and carbon black reinforced nylon 11 coatings are presented. It was found that the improvement in mechanical properties depends on the distribution and surface chemistry of the particulates and on the increase in matrix crystallinity due to the particulates.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Twardowski, T., V. Bhargava, and R. Knight. "Properties of HVOF Sprayed Multi-Scale Polymer/Silica Nanocomposite Coatings." In ITSC2004, edited by Basil R. Marple and Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p1072.

Повний текст джерела
Анотація:
Abstract The high velocity oxy-fuel (HVOF) combustion spray technique previously has been shown to be an excellent solution for depositing nano-reinforced thermoplastic polymer coatings. Dense polymer coatings can be produced regardless of ceramic particle size with little change in the spray parameters. Composite powders with multiple scales of silica reinforcement, ranging from 12 nm to 100 µm, have been created. Preliminary testing was begun using melt processing. The multiple scales have shown improved scratch resistance relative to single-scale reinforcements.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Du, H., S. H. Ng, K. T. Neo, M. Ng, I. S. Altman, S. Chiruvolu, N. Kambe, R. Mosso, and K. Drain. "Inorganic-Polymer Nanocomposites for Optical Applications." In ASME 2006 Multifunctional Nanocomposites International Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/mn2006-17088.

Повний текст джерела
Анотація:
The combination of organic and inorganic materials forms unique composites with properties that neither of the two components provides. Such functional materials are considered innovative advanced materials that enable applications in many fields, including optics, electronics, separation membranes, protective coatings, catalysis, sensors, biotechnology, and others. The challenge of incorporating inorganic particles into an organic matrix still remains today, especially for nanoparticles, due to the difficulties in their dispersion, de-agglomeration and surface modification. NanoGram has pioneered a nanomaterials synthesis technology based on laser pyrolysis process to produce a wide range of crystalline nanomaterials including complex metal oxides, nitrides and sulfides and with precisely controlled compositions, crystal structure, particle size and size distributions. In this paper we will present some examples of nanocomposites prepared using different polymer host materials and phase-pure rutile TiO2. The inorganic component can be dispersed at higher 50 weight percent into the polymer matrix. We have demonstrated a 0.2–0.3 increase of refractive index in the composite over that of host polymer while maintaining high optical transparency. These nanocomposites can be used in a range of applications or optical devices, such as planar waveguides, flat panel displays, optical sensors, high-brightness LEDs, diffraction gratings and optical data storage. Experimental data on TiO2 nanoparticle characterization, dispersion technique, surface modification and will be presented and nanocomposite properties discussed.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Asmatulu, R., A. Garikapati, H. E. Misak, Z. Song, S. Y. Yang, and P. Wooley. "Cytotoxicity of Magnetic Nanocomposite Spheres for Possible Drug Delivery Systems." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-40269.

Повний текст джерела
Анотація:
Cytotoxicity test is a rapid and standardized in vitro method to determine the harmful effects of materials used for biomedical purposes, such as drug carriers, implants and their coatings, biosensors and surgical/medical devices. In the present study, sol-gel driven nickel ferrite (NiFe2O4) and cobalt ferrite (CoFe2O4) nanoparticles (10–25 nm) at different concentrations were incorporated into biodegradable polymer, poly(lactic-co-glycolic acid) (PLGA), using oil-in-oil emulsion/solvent evaporation technique, and then the cytotoxicity of magnetic nanocomposite spheres was characterized using raw cells. The test provides the toxicity of the products prior to their real applications, which may limit animal experimentation, remove potential toxic compounds and reduce the downstream costs. The cytotoxicity results showed that both magnetic nanocomposite spheres were toxic at some degree to the raw cells; however, the cobalt ferrite nanoparticles in nanocomposite spheres are more toxic than the nickel ferrite nanoparticles.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Bondaryeva, Аnna, and Оlena Mokrousova. "The acrylic/montmorillonite nanocomposites for leather finishing." In The 8th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2020. http://dx.doi.org/10.24264/icams-2020.i.3.

Повний текст джерела
Анотація:
Leather finishing is carried out by application of coatings that include polymer, pigment, solvents and any auxiliary products. The acrylic resins are employed in leather finishing to produce polymer film to create a uniform protective coating on the leather surface. To increase the operational properties of the polymer coating for leather finishing, it is proposed to use nanocomposites based on acrylic resin and modified dispersions of montmorillonite (AMC). The introduction of montmorillonite allows the polymer to be structured and provides improved physical and mechanical indexes of the leather coating. Acrylic polymers and colored modified dispersions of montmorillonite (CMDM) were used for the study. The colored montmorillonite was obtained by treating water dispersions of montmorillonite by sodium carbonate, basic chromium sulfate and anionic dyes. The AMC contained 1.5–2.0% montmorillonite of the dry polymer residues. The use of AMC enhances the physical and mechanical properties of the leather coating. It is shown that the use of temperature at 60°C for the formation of finishing coating enhances the structuring of the polymer matrix, which is confirmed by the 40 % increase in the tensile strength of films and the 10 % reduction in relative elongation at break.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Magnafico, Erika, Francesco Poli, Arnaldo Casalotti, and Giulia Lanzara. "Nanocomposite Coating for Strain Monitoring." In ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/smasis2019-5682.

Повний текст джерела
Анотація:
Abstract In recent years carbon nanotubes (CNTs) have been widely used for the realization of polymeric matrix nanocomposites for strain monitoring applications in civil, biomedical and aerospace engineering. In fact, by embedding CNTs in an insulated polymer matrix, it is possible to realize a conductive nanocomposite with piezoresistive behaviour which allows to monitor the occurring strains through an electrical resistance change. In this work a conductive coating made of Multi-Walled Carbon Nanotubes (MWNTs) and PolymethylMethacrilate (PMMA) is fabricated and is applied onto a fiberglass structure surface. In order to characterize the electrical behaviour of the coating and its capability to sense strain, an experimental campaign is carried out by applying a voltage to the manufactured coating. Its variations throughout the surface in the longitudinal and transverse directions are then evaluated to identify the electric field distribution and its dependence on strain.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Polymer Nanocomposite coatings" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії