Добірка наукової літератури з теми "Paper industry Environmental aspects Australia"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Paper industry Environmental aspects Australia".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Paper industry Environmental aspects Australia"
1
FIELKE, SIMON J., and DOUGLAS K. BARDSLEY. "A Brief Political History of South Australian Agriculture." Rural History 26, no. 1 (March 9, 2015): 101–25. http://dx.doi.org/10.1017/s095679331400017x.
Повний текст джерелаАнотація:
Abstract:This paper aims to explain why South Australian agricultural land use is focused on continually increasing productivity, when the majority of produce is exported, at the long-term expense of agriculturally-based communities and the environment. A historical analysis of literature relevant to the agricultural development of South Australia is used chronologically to report aspects of the industry that continue to cause concerns in the present day. The historically dominant capitalist socio-economic system and ‘anthropocentric’ world views of farmers, politicians, and key stakeholders have resulted in detrimental social, environmental and political outcomes. Although recognition of the environmental impacts of agricultural land use has increased dramatically since the 1980s, conventional productivist, export oriented farming still dominates the South Australian landscape. A combination of market oriented initiatives and concerned producers are, however, contributing to increasing the recognition of the environmental and social outcomes of agricultural practice and it is argued here that South Australia has the opportunity to value multifunctional land use more explicitly via innovative policy.
2
Al Farooque, Omar, Bernice Kotey, and Helena Ahulu. "Exploring Environmental Disclosure in SelectedAustralian Multinationals under the GRI Guidelines." Issues In Social And Environmental Accounting 8, no. 3 (September 30, 2014): 137. http://dx.doi.org/10.22164/isea.v8i3.90.
Повний текст джерелаАнотація:
This paper explores changes in environmental reporting among Australian MNEs between 2004 and 2007, using the GRI guidelines, and explains how GRI transformation (from G2 to G3) leads to changes in environmental disclosure aspects along with their association with company size, profitability, industry sector. Applying Wilcoxon matched pair signed ranked and Spearman rank correlation tests, twenty companies from the Australian SAM Sustainability Index (AuSSI) are examined to identify the extent of changes on specific aspects of environmental disclosure. The findings of the paper document a significant increase in environmental reporting in Australian companies. In particular, reporting has increased for energy, emissions and environmental management followed by water, overall, materials, transport and product/services aspects. However, a shift in emphasis from compliance and biodiversity aspects associated with climate changes and resource preservation is also evident. Again, the majority of changes occurred in companies operating in environmentally sensitive industries with industry sector having significant relationship with a few environmental disclosure aspects, the study shows no significant effect of company size and profitability on different environmental disclosure aspects. These evidences indicate that external forces (such as, legislation, industry sensitiveness to environment, and stakeholder awareness and pressure) rather than internal factors are more effective to influence and determine environmental disclosure in Australian companies.<br /><br /><br /><br />
3
Worsley, Anthony, Wei Wang, and Stacey Ridley. "Australian adults’ knowledge of Australian agriculture." British Food Journal 117, no. 1 (January 5, 2015): 400–411. http://dx.doi.org/10.1108/bfj-07-2013-0175.
Повний текст джерелаАнотація:
Purpose – Agriculture is a major generator of wealth and employment in Australia. However, it faces a range of economic and environmental challenges which require substantial community support. The purpose of this paper is to examine Australian adults’ Australian knowledge of, and attitudes towards, Australian agriculture. Design/methodology/approach – Online questionnaire survey of 1,026 adults conducted nationwide during August 2012. Findings – Most respondents had little knowledge of even the basic aspects of the industry but they approved of farmers’ performance of their roles. Latent class analysis showed that there are two groups of consumers with low and lower levels of knowledge. The respondents’ age, rural residence and universalist values were positive predictors of agricultural knowledge. Research limitations/implications – This was a cross-sectional, quota-based survey which examined only some aspects of agriculture. However, the findings suggest that more communication with the general public about the industry is required in order to build on the positive sentiment that exists within the community. Practical implications – More education about agriculture in schools and higher education is indicated. Social implications – The poor state of knowledge of agriculture threatens the social contract upon which agricultural communities depend for survival. Originality/value – The study highlights the poor state of general knowledge about agriculture in Australia. The findings could be used as a baseline against which the efficacy of future education programmes could be assessed.
4
Lewis, David. "Taxation aspects of climate change management measures." APPEA Journal 50, no. 1 (2010): 253. http://dx.doi.org/10.1071/aj09015.
Повний текст джерелаАнотація:
Climate change is undoubtedly one of the greatest economic, social, and environmental challenges now facing the world. The present Australian Government is committed to acting on climate change and Australia’s progress towards its emissions reduction targets is being closely watched internationally. To contribute effectively to global climate change action, Australia must demonstrate its ability to implement robust and sustainable domestic emissions management legislation. The Carbon Pollution Reduction Scheme (CPRS), modelled after the cap-and-trade system, continues to be debated by our policymakers, as the Government moves to re-introduce its preferred CPRS legislative package for the third time. The advent of climate change legislation is inevitable and its impact will be far-reaching. This paper reviews the fiscal aspects of the proposed CPRS legislation in the context of the oil and gas industry, and whether it is conducive to creating incentives for appropriate climate change response by the industry. In particular, this paper will consider: the direct and indirect tax features specifically covered in the proposed CPRS legislation and their implications; the areas of taxation that remain uncanvassed in the proposed CPRS legislation and aspects requiring clarification from the tax administration; the interaction between Petroleum Resource Rent Tax (PRRT) and the CPRS measures; the flow-on impacts to taxation outcomes resulting from proposed accounting and financial reporting responses to the CPRS legislation; the income tax and PRRT treatment of selected abatement measures; and, elements of a good CPRS tax strategy and compliance action plan.
5
Qi, Fenjie, Yaxin Zhou, and Shuo Feng. "Strengthening Destinations’ Resilience from Bushfires—A Study of Eastern Australia." Journal of Management and Sustainability 11, no. 2 (May 30, 2021): 43. http://dx.doi.org/10.5539/jms.v11n2p43.
Повний текст джерелаАнотація:
Climate change has brought people’s attention in recent decades, which demonstrates a critical phenomenon of increased natural disaster risks. The consequences of natural hazards are highly potential to bring significant economic, reputational, social, and environmental impacts on Australia’s tourism industry. Considering the close relationship between the unique natural environment and the local tourism industry, natural disasters always play critical roles in terms of the destinations’ resilience. This paper aims to examine the cause-and-effect of natural disaster resilience for the tourism industry in Eastern Australia with the particular concern of bushfire. Representative bushfire events will be studied to locate the industry’s preparedness and the existed action gaps mainly with the focus on government and destination management organizations, as well as discuss the disaster prevention implications, direct/indirect impacts and tourism-related issues. Also, a natural disaster resilience assessment framework for the industry will be developed with the key indicators from multiple aspects. A couple of future directions will be proposed regarding recovery methods, including the needs of destination image recovery, supportive policies for small businesses and cross-functional partnership.
6
Kalutara, Pushpitha, Guomin Zhang, Sujeeva Setunge, and Ron Wakefield. "Factors that influence Australian community buildings’ sustainable management." Engineering, Construction and Architectural Management 24, no. 1 (January 16, 2017): 94–117. http://dx.doi.org/10.1108/ecam-10-2015-0158.
Повний текст джерелаАнотація:
Purpose Australia has a huge stock of community buildings built up over decades. Their replacements consume a large sum of money from country’s economy which has called for a strategy for their sustainable management. For this, a comprehensive decision-making structure is an utmost requirement. The purpose of this paper is to capture their sustainable management from four aspects, i.e. environmental, economic, social and functional. Design/methodology/approach The design process follows an extensive review of environmental and life cycle assessments and company context documents. Extracted factors are tailored to community buildings management following expert consultation. However, the resulted list of factors is extremely large, and “factor analysis” technique is used to group the factors. For this, an industry-wide questionnaire across Australian local councils is employed to solicit opinions of the list of factors. Findings The analysis has pinpointed 18 key parameters (criteria) to represent all four aspects. This paper presents the preliminary findings of the factors and the analysis results based on the questionnaire responses. Practical implications The final decision-making structure incorporates all these aspects and criteria. This can be used to develop a decision-making model which produces a sustainability index for building components. Asset managers can mainly use the sustainability index to prioritise their maintenance activities and eventually, to find out cost-optimisation options for them. Originality/value Most notably, this is the first study to apply all four sustainability aspects (environmental, economic, social and functional) to develop a decision-making structure for Australian community buildings’ sustainable management.
7
Vijayakumar, Ankitha, Muhammad Nateque Mahmood, Argaw Gurmu, Imriyas Kamardeen, and Shafiq Alam. "Social sustainability indicators for road infrastructure projects: A systematic literature review." IOP Conference Series: Earth and Environmental Science 1101, no. 2 (November 1, 2022): 022039. http://dx.doi.org/10.1088/1755-1315/1101/2/022039.
Повний текст джерелаАнотація:
Abstract Australia’s population is predicted to grow to 31.4 million by 2034, according to Infrastructure Australia Audit 2019, resulting in additional demand for road infrastructure. Although road infrastructure projects have a significant positive impact at the regional level regarding reduced travel time, improved accessibility, and amenities, they may also have negative social impacts at the local level. However, road infrastructure projects are often seen as key drivers of economic development. Social aspects are generally less considered in the decision-making process of the project lifecycle. The existing sustainability assessment models focus on economic and environmental aspects and lack social considerations. To bridge the gap, this paper aims to examine the existing literature on social sustainability in the construction industry and identify the social aspects and relevant indicators to be considered in assessing the social sustainability performance of road infrastructure projects. Through systematic literature review, using Scopus, Web of Science, EBSCO and google search databases from an initial set of 1178 journals, conference papers, books, book chapters and other relevant industry reports, 80 articles related to social sustainability in the construction industry were selected for the study. Based on the analysis, nine social sustainability criteria such as quality of life, equity, employment, health and safety, stakeholder participation, culture and heritage, compensation strategies, governance, macro-social activities and 78 respective indicators were identified. The findings of this study may assist policymakers and industry practitioners in developing comprehensive assessment models for benchmarking social sustainability in Australian road infrastructure projects.
8
Marzban, Samin, Iva Durakovic, Christhina Candido, and Martin Mackey. "Learning to work from home: experience of Australian workers and organizational representatives during the first Covid-19 lockdowns." Journal of Corporate Real Estate 23, no. 3 (June 7, 2021): 203–22. http://dx.doi.org/10.1108/jcre-10-2020-0049.
Повний текст джерелаАнотація:
Purpose This paper aims to provide a snapshot of workers’ experience while working from home (WFH) during the Australian lockdown in the middle of the Covid-19 pandemic. It focuses on lessons to inform organizations, employees and the design of the workspaces post-2020, human, organizational and environmental considerations may affect satisfaction, productivity and health. Design/methodology/approach Two separate surveys were designed for this study to target Australian organizations and knowledge workers. Participants included 28 organizations and 301 employees, and descriptive and correlational analyses were conducted. Findings Organizations stated productivity losses, maintaining culture and workplace health and safety concerns with WFH setup while employees were more concerned about their social interactions, internet connectivity and increased workload. Employees also found the social aspects of WFH challenging and disclosed that face-to-face interactions with their colleagues was the most important reason they wanted to return to the office. High level of trust and value was reported amongst the organizations and workers. Originality/value In the scarcity of academic literature around negative and positives of the WFH experiment during the COVID-19 pandemic, the main sources of information have been industry-focused reports. This study aims to contribute to this knowledge gap by identifying positives and negative aspects of WFH during the first wave of lockdowns in Australia in 2020 from the organization and workers’ perspective, including human, organizational and environmental considerations.
9
Bevan, Emma A. M., and Ping Yung. "Implementation of corporate social responsibility in Australian construction SMEs." Engineering, Construction and Architectural Management 22, no. 3 (May 18, 2015): 295–311. http://dx.doi.org/10.1108/ecam-05-2014-0071.
Повний текст джерелаАнотація:
Purpose – The purpose of this paper is to investigate the implementation of corporate social responsibility (CSR) related activities in small to medium sized construction enterprises within Australia. Reasons behind the implementation level are also evaluated. Design/methodology/approach – Quantitative and qualitative company level data from 28 Australian small to medium sized construction enterprises were collected using an in-depth questionnaire. Levels of CSR implementation in three aspects, namely, environmental, social and ethical, were measured. Each aspect was broken down into sub-areas and implementation scores were aggregated and normalised. Awareness level and concern for economic aspect, the two hypothesised reasons for level of implementation, were also measured. Non-parametric correlation analyses were used to examine the hypotheses. Findings – The findings suggest small to medium-sized enterprises (SMEs) incorporate some aspects of CSR into their business activities even though they do not refer to the practices as CSR, as none of them have a formal CSR policy in place. Most SMEs in the construction industry implement ethical and economic aspect of CSR; however implementation across environmental and social issues is limited. Non-parametric correlation analyses show that higher awareness of CSR issues leads to higher levels of implementation and that concern about economic aspect is not a reason why CSR is not implemented into business practices. Research limitations/implications – Everett Rogers’ diffusion paradigm can also be applied to CSR implementation, but more research works are required to theoretically and empirically examine the relationships between CSR implementation and economic aspect. Originality/value – It is apparent that there is a significant gap in the research regarding Australian SMEs and sustainability issues as the majority of the literature is focused upon large organisations even though the approaches taken by SMEs towards CSR are very different to those of large corporations. The SME business sector is a significant sector in terms of its environmental, economic and social impacts. Hence recognition of this sector is growing and is now becoming the focus of an agenda to promote the implementation of CSR practices in SMEs. This paper aims to provide useful and detailed information to add to what is currently an underdeveloped body of knowledge in this area.
10
Kagirova, M. V., and Yu N. Romantseva. "ANALYSIS OF FOREIGN EXPERIENCE OF DIGITALIZATION IN AGRICULTURE ON THE EXAMPLE OF AUSTRALIA AND ASIAN COUNTRIES." EKONOMIKA I UPRAVLENIE: PROBLEMY, RESHENIYA 4, no. 12 (2021): 88–97. http://dx.doi.org/10.36871/ek.up.p.r.2021.12.04.012.
Повний текст джерелаАнотація:
The paper contains the results of studying the conditions, processes and tools for the digitali-zation of agriculture in Japan, South Korea and Australia, which have common soil and climatic conditions and specialization in production with some regions of Russia, the identity of the problems in the implementa-tion of digital transformations. As a result, the most relevant solutions for Russia were identified in the state strategy for the digitalization of the industry in the aspects of collaboration between science, education and production, areas of state support.
Дисертації з теми "Paper industry Environmental aspects Australia"
1
Bauer, Elizabeth Nanette. "MODIFICATION OF AN EXISTING BENTHAL MODEL FOR PAPER MILL WASTES." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/275443.
Повний текст джерела
2
Burroughs, Gary Leslie. "The response to environmental economic drivers by civil engineering contractors in South Australia." Title page, contents and abstract only, 2000. http://web4.library.adelaide.edu.au/theses/09ENV/09envb972.pdf.
Повний текст джерелаАнотація:
Bibliography: leaves 91-93. Examines the response of two civil engineering construction contractors in South Australia to environmental economic conditions and market requirements using primarily an action research methodology whilst the researcher was engaged as the environmental manager at both corporations.
3
Baker, Scott Alan. "Activated sludge biotreatability of pulp and paper bleach wastes : investigation of bleaching options." Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/21647.
Повний текст джерела
4
Larwood, Andrew John. "Cleaner production : promoting and achieving it in the South Australian foundry industry." Title page, table of contents and abstract only, 2000. http://web4.library.adelaide.edu.au/theses/09ENV/09envl336.pdf.
Повний текст джерелаАнотація:
Bibliography: leaves 123-130. The literature search and the findings from the investigation have been used to provide recommendations for a sector specific cooperative approach using regulation, self-regulation, voluntary agreements, economic incentatives and educational/information strategies to promote and acheive cleaner production in the South Australian foundry industry.
5
Gauthier, Francis. "Study of coliform bacteria in Canadian pulp and paper mill water systems : their ecology and utility as health hazard indicators." Thesis, McGill University, 2000. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33401.
Повний текст джерелаАнотація:
Coliform bacteria have long been used to indicate fecal contamination of food, water, and solid surfaces, and thus the presence of a health hazard. In this study, the in-mill water and external effluent treatment systems of seven typical Canadian pulp and paper mills were shown to support the growth of numerous coliforms, especially Klebsiella spp, Escherichia coli, Enterobacter spp., and Citrobacter spp . Mill coliforms were shown to be not just simple transients from feedwater or furnish (wood), but to be continuously growing, especially in the primary clarifiers. Therefore, coliforms and fecal coliforms cannot be used as fecal contamination indicators in pulp and paper mill water and effluent treatment systems.N2-fixing coliform populations were detected in mill water systems and were analyzed using N2-fixation assays and nitrogenase gene (nifH) probing. Both active in situ populations and cultured microbial isolates were tested. Active N2-fixation was demonstrated in six primary clarifiers. Measurement of the numbers and composition of the total culturable bacterial community in a primary clarifier revealed that approximately 50% of all aerobic cells contained nifH , of which >90% were Klebsiella. Coliforms growing on MacConkey agar plates from the primary clarifier were all identified as Klebsiella and 100% of these Klebsiella contained the nifH gene. Preliminary estimates indicate that the amount of N2 fixed per day is substantial in some clarifiers.
6
Jordan, Matthew. "Procuring industrial pollution control : the South Australian case, 1836-1975." Title page, contents and abstract only, 2001. http://web4.library.adelaide.edu.au/theses/09PH/09phj816.pdf.
Повний текст джерела
7
Hailu, Atakelty Gebremedihen. "Environmentally sensitive analysis of economic performance, productivity and efficiency in the Canadian pulp and paper industry, 1959-1994." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ34772.pdf.
Повний текст джерела
8
Sullivan, Elizabeth Carol. "The use of advanced treatment methods for removal of color and dissolved solids from pulp and paper wastewater." Thesis, Virginia Polytechnic Institute and State University, 1986. http://hdl.handle.net/10919/94476.
Повний текст джерелаАнотація:
This study investigated the use of activated carbon and ion exchange for the removal of color and dissolved solids from pulp and paper wastewater generated by the Union Camp Corporation mill in Franklin, Virginia. The objective of the treatment was to provide a high quality effluent suitable for direct recycling. This advanced treatment followed pretreatment by lime, alum, or ferric chloride. Required effluent quality was defined as being 5 Pt-Co units color and 75 mg/L chloride. Granular and powdered carbons, manufactured by the Westvaco Corporation, were utilized in the study. The ion exchange resin investigated was Amberlite IRA-68, manufactured by Rohm and Haas. Carbon treatment consisted of batch and column operation; ion exchange column treatment was used.
The results of the study indicated that the required effluent quality was achieved by activated carbon and ion exchange treatment of wastewater that had been chemically pretreated. The most successful treatment schemes for the biotreated effluent were pretreatment with 500 mg/L alum or 2500 mg/L lime, followed by carbon column treatment for color polishing and ion exchange for chloride removal. The lime pretreated sample produced an effluent containing less than 5 Pt-Co units color as necessary for reuse, while the alum pretreated sample would require dilution with make-up water or additional treatment (i.e. ion exchange) to obtain recycle quality.
The use of ion exchange for chloride removal is not practical due to the preferential exchange for sulfates. Until such time as sulfate can be eliminated from the wastewater source, other methods of dissolved solids removal should be investigated.M. Eng.
9
Hall, Sandra. "The contribution of heavy industry and commercial activity at Canning Vale to the loads of nitrogen and phosphorus released in the Bannister Creek catchment area." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2007. https://ro.ecu.edu.au/theses/307.
Повний текст джерелаАнотація:
Stormwater is recognised as a transport mechanism for pollutants. Pollutants enter stormwater drains via surface washoff, subsurface flow or direct discharge. Landuse is reported to affect the quantity of pollutants released into stormwater drains. In Australia, the contribution of nutrients (nitrogen and phosphorus) and surfactants from industrial areas to surface drainage is poorly understood. Previous research has mainly focused on the quality of water leaving residential and agricultural areas. In Western Australia, there is growing concern over the health of the Swan-Canning River system, which is seeing signs of eutrophication. Runoff and discharge from residential, commercial, and industrial areas influence the quality of water in the Swan-Canning River system.
A study of nutrient release was undertaken for the eastern sector of the Canning Vale Industrial Area, to determine the contribution of industry to nutrient loads received by the Canning River system, between August 2001 and 2002. Data was collected three times a week using a point sampling regime. Diurnal and storm event variability were also tested. Data collected from the eastern sector of the industrial area was compared to that released from the entire Bannister Creek Catchment area.
Nitrogen and phosphorus concentrations downstream of industrial areas have been reported at 45mg L-1 and 15mg L-1 respectively (Thomas et al, 1997; John, 2000). In this study, the median concentrations of nitrogen and phosphorus downstream of industry in Bannister Creek, at the Tom Bateman Reserve Detention Basin, were 1.32mg L-1 and 0.11mg L-1 respectively. Concentrations of nitrogen and phosphorus were not indicative of point source discharge. Nutrient concentrations reported in Bannister Creek in this study, have been consistent with data collected and reported in other studies i.e. Donohue et al, 1992 and Jakowyna, 2002.
Nitrogen and phosphorus loads released from the entire Bannister Creek Catchment area, exceeded loads previously reported in other studies i.e. Donohue et al ( 1994); Donohue et al, 1992 and Jakowyna, 2002. An estimated 32890kg of nitrogen and 2085kg of phosphorus was released from Bannister Creek Catchment during the study. Rainfall during the study period was reflective of the drying climate Perth has been experiencing over the last ten years. Nitrogen and phosphorus released from Bannister Creek during the study period are likely to be underestimated, as they do not include the data collected for a significant storm event recorded at Hybanthus Road on the 16.4.02. During this 1- 2/1-5 ARI storm event 1586kg of nitrogen and 185kg of phosphorus were exported from Bannister Creek, producing loads ten times greater than that estimated during the point sampling regime. The later values were used in the calculation of annual loads to maintain consistency between the study sites. Despite the significant load of nutrients released from the catchment on 16.4.02, rainfall was not the main transport mechanism for nitrogen and phosphorus, indicated by the weak correlation e.g. R2 > 0.1. Base flow was determined to be the most significant pathway of nutrient export.
The concentrations and loads of nitrogen and phosphorus released from the industrial area were low, but the contribution to catchment loading was important. The rate of nutrient release per unit of area was higher from the eastern sector of the Canning Vale Industrial Area than the entire Bannister Creek Catchment Area. Nitrogen was released at a rate of 4163kg km2 yr from the industrial area and 134 2. 86kg km2 yr for the entire catchment. Phosphorus was the same. From the industrial area it was released at a rate of 397kg km2 yr compared to a rate of 94.2kg km2 yr from the entire Bannister Creek Catchment Area.
The study revealed the need to retain nutrients within the catchment. Studies on stormwater management suggest that this can be achieved through Water Sensitive Urban Design and Best Management Practices. Both strategies work on the principle of retaining and recycling nutrients within the catchment area. Work is currently been undertaken to meet the objectives of these two management strategies in Bannister Creek. Work has included the removal of the southwestern bank of the Tom Bateman reserve detention basin to create a meandering wetland, and the downgrading of the banks along Bywood Way, Lynwood to create a Living Stream. Further studies should focus on the effectiveness of these strategies.
10
Bhathena, Jasmine. "The physical and physiological effects of nitrogen and phosphorus limitation on a pulp and paper mill effluent biotreatment microbial community /." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=80228.
Повний текст джерелаАнотація:
The influence of nitrogen (N) and phosphorus (P) limitation on pulp and paper mill activated sludge (AS) floc properties was studied using a bioreactor fed with synthetic Kraft mill effluent. The bioreactor and synthetic effluent were designed and shown to perform like the real mill system providing the AS, establishing the in vivo relevance of the results. Limitation of either N or P produced inadequate effluent biotreatment, shown by poor BOD5 and suspended solids removal, and by decreased biomass health, performance, and floc settling. Greatly enhanced poly-beta-hydroxybutyrate (PHB) (but not carbohydrate or extracellular polymeric substances [EPS]) synthesis was the common response of the floc microbial community to N limitation over many days. In contrast, P-limitation increased total carbohydrate and EPS, but not PHB.N limitation, but not P limitation, caused the net floc surface charge to be much more negative, while P-limitation, but not N-limitation, increased the floc bound water content and surface hydrophobicity. Thus, in real pulp and paper mill AS systems, careful manipulation of N or P additions may be useful to optimize the key process of charged polymer-assisted AS dewatering.
Книги з теми "Paper industry Environmental aspects Australia"
1
Abramovitz, Janet N. Paper cuts: Recovering the paper landscape. Edited by Mattoon Ashley T and Peterson Jane A. Washington, D.C: Worldwatch Institute, 1999.
Знайти повний текст джерела
2
Canada. Library of Parliament. Research Branch. Pulp and paper: The reduction of toxic effluents. [Ottawa]: Library of Parliament, Research Branch, 1992.
Знайти повний текст джерела
3
Hartman, Raymond S. Why paper mills clean up: Determinants of pollution abatement in four Asian countries. Washington, DC: World Bank, Policy Research Dept., Environment, Infrastructure, and Agriculture Division, 1997.
Знайти повний текст джерела
4
Technical Association of the Pulp and Paper Industry. Water Quality Committee., ed. Industrial environmental control: Pulp and paper industry. 2nd ed. Atlanta, Ga: Tappi, 1993.
Знайти повний текст джерела
5
Industrial environmental control: Pulp and paper industry. New York: Wiley, 1986.
Знайти повний текст джерела
6
Unwin, Jay P. A survey of pulp and paper industry environmental protection expenditures--1999. Research Triangle Park, N.C: National Council of the Paper Industry for Air and Stream Improvement, 2002.
Знайти повний текст джерела
7
Unwin, Jay P. A survey of pulp and paper industry environmental protection expenditures - 2000. Kalamazoo, Mich: National Council for Air and Stream Improvement, Central-Lake States Regional Center, 2002.
Знайти повний текст джерела
8
(Firm), International Sports Inc, and BC Environment. Habitat Protection Branch, eds. Golf industry opportunities in B.C.: A discussion paper. Victoria, B.C: The Ministry, 1993.
Знайти повний текст джерела
9
Kroesa, Renate. The Greenpeace guide to paper. [Vancouver, B.C: Greenpeace Canada, 1990.
Знайти повний текст джерела
10
Kelly, Ferguson, ed. Environmental solutions: For the pulp and paper industry. San Francisco: Miller Freeman, 1991.
Знайти повний текст джерелаЧастини книг з теми "Paper industry Environmental aspects Australia"
1
Rahman, Nayem. "Toward Achieving Environmental Sustainability in the Computer Industry." In Waste Management, 1417–31. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1210-4.ch065.
Повний текст джерелаАнотація:
The computer industry has come under increasing scrutiny in terms of energy consumption, the carbon emissions and e-waste. Shipment of e-waste to developing countries where it is often disposed of in unsafe ways is another major issue. Organizations and individuals have a tendency to throw away or store their aging computer technology assets which is not environmentally sustainable and or cost effective. Implementation of an end-to-end computer and related products' sustainability management strategy by incorporating the reuse of existing technology can make a major impact on the environment. Computer industry sustainability management includes design and development of energy efficient computer products, refurbishing of computer assets, purchasing of green or refurbished components and providing sustainability metrics procedures. By implementing sustainability programs, organizations can contribute in reducing the amount of energy spent to develop new computer technology products, help in reducing carbon emission, keep e-waste out of landfills and recycle them. This paper discusses different aspects of sustainable computer industry program and proposes that computer makers take ownership of disposing of e-waste by following safety standards. The paper also proposes adopting reverse supply chain process for possible reuse, recycle or disposal of computers.
2
Coiacetto, Eddo. "Challenges of Making Efficient Use of Existing Infrastructure." In Advances in Environmental Engineering and Green Technologies, 201–12. IGI Global, 2010. http://dx.doi.org/10.4018/978-1-61520-775-6.ch014.
Повний текст джерелаАнотація:
In market-based economies, one of the significant challenges and aims of planning is coordinating the provision of infrastructure with development. A specific case of this involves making more efficient use of existing infrastructure by encouraging more intense, higher density, mixed-use development around transit nodes. Focusing on the development industry, the key proponents of development in market-based economies, this chapter discusses some aspects of the challenges for planners and urban policy makers in facilitating Transit Oriented Developments (TODs) in market-based economies, referring from time-to-time to the urban area of Greater Brisbane, Australia to provide a concrete example to help illustrate some of the problems. The implementation of TODs may be considerably slower than what their advocates may desire for several reasons. Developers operate in specific development submarkets (or groups thereof) for which they devise strategies to operate and compete within. These strategies may also make it difficult and unattractive to switch to or enter other markets. TODs present some special risks to developers due to their mixed-use character and their locational aspects. As a result, the range of firms with the capacity for, or interest in, undertaking TOD is likely to be small.
3
Chang, Li-Chung, Wei Li, Yu Wu, Sang-Bing Tsai, Chao-Feng Hsu, and Cheng-Kuang Wang. "Green Innovation in the Absence of Social Trust." In Advances in Environmental Engineering and Green Technologies, 168–82. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-3537-9.ch010.
Повний текст джерелаАнотація:
In recent years, food safety has become an urgent problem to be solved, especially in China's dairy industry. After the 2008 Chinese milk scandal, how to rise again by green innovation is a very important issue. As a representative of China's dairy enterprises and with the enterprise positioning of “a milk manufacturing service provider that commits itself to human health”, MengNiu Dairy has achieved “MengNiu speed” and “MengNiu miracle” attracting worldwide attention within ten years. Therefore, the green innovation strategy implemented by MengNiu Dairy is worthy of research. In this paper, MengNiu Dairy, the leading dairy enterprise in China, was taken as the research object, and the author mainly applied narrative research method to analyze the green innovation strategy implemented by MengNiu Dairy from all aspects, and summarized that through the combination of charity marketing and green innovation, MengNiu Dairy developed the system and model of sustainable strategy, which had far-reaching significance in its development and adapting to the current environment at home and abroad.
4
Kim, Yongkwon, Heejung Yang, and Chin-Wan Chung. "SEDRIS Transmittal Storing and Retrieval System Using Relational Databases." In Geospatial Research, 855–77. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-4666-9845-1.ch040.
Повний текст джерелаАнотація:
Modeling and simulation (M&S) are widely used for design, analysis, and optimization of complex systems and natural phenomena in various areas such as the defense industry and the weather system. In many cases, the environment is a key part of complex systems and natural phenomena. It includes physical aspects of the real world which provide the context for a specific simulation. Recently, several simulation systems are integrated to work together when they have needs for exchanging information. Interoperability of heterogeneous simulations depends heavily on sharing complex environmental data in a consistent and complete manner. SEDRIS (Synthetic Environmental Data Representation and Interchange Specification) is an ISO standard for representation and interchange of environmental data and widely adopted in M&S area. As the size of the simulation increases, the size of the environmental data which should be exchanged between simulations increases. Therefore, an efficient management of the environmental data is very important. In this paper, the authors propose storing and retrieval methods of SEDRIS transmittals using a relational database system in order to be able to retrieve data efficiently in the environmental data server cooperating with many heterogeneous distributed simulations. By analyzing the structure and the content of SEDRIS transmittals, relational database schemas are designed. To reduce query processing time of SEDRIS transmittals, direct storing and retrieval methods which do not require the type conversion of SEDRIS transmittals are proposed. Experimental analyses are conducted to show the efficiency of the proposed approach. The results confirm that the proposed approach greatly reduces the storing time and retrieval time compared to comparison approaches.
Тези доповідей конференцій з теми "Paper industry Environmental aspects Australia"
1
C MacKrell, Dale. "Win-Win-Win: Reflections from a Work-Integrated Learning Project in a Non-Profit Organization." In InSITE 2016: Informing Science + IT Education Conferences: Lithuania. Informing Science Institute, 2016. http://dx.doi.org/10.28945/3467.
Повний текст джерелаАнотація:
[The final form of this paper was published in the journal Issues in Informing Science and Information Technology.] This paper reports on the educational aspects of an information systems work-integrated learning (WIL) capstone project for an organization which operates to alleviate homelessness in the Australian non-profit sector. The methodology adopted for the study is Action Design Research (ADR) which draws on action research and design research as a means for framing a project's progress. Reflective insights by the project stakeholders, namely, students, academics, and the non-profit client, reveal a curriculum at work through internal features of the organization; personal features of the participants and features of the external environment. Preliminary findings suggest that students in a WIL project for a non-profit are highly engaged, especially when they become aware of the project’s social value. As well, the improvement of professional skills and emotional intelligence by students is more likely in real-life practice settings than in other less authentic WIL activities, equipping graduates for the workforce with both strong disciplinary and generic skills. Win-win-win synergies through project collaboration represent worthwhile outcomes to education, industry and research.
2
Christensen, David, and Andrew Re. "Is Australia Prepared for the Decommissioning Challenge? A Regulator's Perspective." In SPE Symposium: Decommissioning and Abandonment. SPE, 2021. http://dx.doi.org/10.2118/208483-ms.
Повний текст джерелаАнотація:
Abstract The National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA) is Australia's independent expert regulator for health and safety, structural (well) integrity and environmental management for all offshore oil and gas operations and greenhouse gas storage activities in Australian waters, and in coastal waters where regulatory powers and functions have been conferred. The Australian offshore petroleum industry has been in operation since the early 1960s and currently has approximately 57 platforms, 11 floating facilities, 3,500km of pipelines and 1000 wells in operation. Many offshore facilities are now approaching the end of their operational lives and it is estimated that over the next 50 years decommissioning of this infrastructure will cost more than US$40.5 billion. Decommissioning is a normal and inevitable stage in the lifetime of an offshore petroleum project that should be planned from the outset and matured throughout the life of operations. While only a few facilities have been decommissioned in Australian waters, most of Australia's offshore infrastructure is now more than 20 years old and entering a phase where they require extra attention and close maintenance prior to decommissioning. When the NOGA group of companies entered liquidation in 2020 and the Australian Government took control of decommissioning the Laminaria and Corallina field development it became evident that there were some fundamental gaps in relation to decommissioning in the Australian offshore petroleum industry. There are two key focus areas that require attention. Firstly, regulatory reform including policy change and modification to regulatory practice. Secondly, the development of visible and robust decommissioning plans by Industry titleholders. The purpose of this paper is to highlight the importance and benefit of adopting good practice when planning for decommissioning throughout the life cycle of a petroleum project. Whilst not insurmountable, the closing of these gaps will ensure that Australia is well placed to deal with the decommissioning challenge facing the industry in the next 50 years.
3
Loven, Larry. "Environmental Management for Regulated Industrial Wastes." In 1998 2nd International Pipeline Conference. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/ipc1998-2116.
Повний текст джерелаАнотація:
This paper is to keep you informed of certain recent developments in the Alberta Energy and Utilities Board (AEUB) that is of particular interest to pipleline companies. Since these changes were first initiated, the Board has undertaken a significant transformation of the management of regulated wastes from the petroleum industry. The passing of the G-58 guidelines will have far reaching effects on the business environment of the petroleum industry. We have analyzed some of the more important aspects of this reform. We continue to closely monitor changes from our western Canadian operations, particularly the impact of those changes on those generating regulated wastes in Alberta.
4
Jaques, Susan. "Same Yet Different: A Comparison of Pipeline Industries in Canada and Australia." In 2000 3rd International Pipeline Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/ipc2000-106.
Повний текст джерелаАнотація:
Canada and Australia are remarkably similar countries. Characteristics such as geography, politics, native land issues, and population are notably similar, while the climate may be considered the most obvious difference between the two countries. The pipeline industries are similar as well, but yet very different in some respects too. This presentation will explore some of the similarities and differences between the pipeline industries in both countries. The focus of the discussion will be mainly on long-distance, cross-country gas transmission pipelines. The author of this paper spent 4 years working for TransCanada PipeLines in Calgary in a pipeline design and construction capacity, and has spent 2.5 years working for an engineering consultant firm, Egis Consulting Australia, in a variety of roles on oil and gas projects in Australia. Topics to be addressed include the general pipeline industry organisation and the infrastructure in both countries. The history of the development of the pipeline industry in each country provides insight as to why each is organised the way it is today. While neither system is “better” than the other, there are certain advantages to Canada’s system (nationally regulated) over Australia’s system (currently state-regulated). The design codes of each country will be compared and contrasted. The pipeline design codes alternate in level of detail and strictness of requirements. Again, it cannot be said that one is “better” than the other, although in some cases one country’s code is much more useful than the other for pipeline designers. Construction techniques affected by the terrain and climate in each country will be explored. Typical pipeline construction activities are well known to pipeliners all over the globe: clear and grade, trench, string pipe, weld pipe, coat welds, lower in, backfill and clean up. The order of these activities may change, depending on the terrain and the season, and the methods of completing each activity will also depend on the terrain and the season, however the principles remain the same. Australia and Canada differ in aspects such as climate, terrain and watercourse type, and therefore each country has developed methods to handle these issues. Finally, some of the current and future opportunities for the 21st century for the pipeline industry in both countries will be discussed. This discussion will include items such as operations and maintenance issues, Canada’s northern development opportunities, and Australia’s national gas grid possibilities.
5
Mercer, Tim, and Jonathan Francis. "Education and Industry Partnership: A Case Study of Co-Delivery." In ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2009. http://dx.doi.org/10.1115/icem2009-16065.
Повний текст джерелаАнотація:
One of the essential elements for safe operation of a nuclear licensed site is the availability to the licensee in sufficient numbers of suitably qualified and experienced people to carry out and manage the operations and associated design work. In the last few years, there have been a number of reports to illustrate the recent and current problems of recruiting such people to work in the traditional locations for nuclear personnel in the North-West of England. Concern for the immediate future is exacerbated by a peculiar demographic of the people currently employed in positions demanding higher level skills. In response to the growing realization that there is an impending skills gap that needs to be filled, Sellafield Limited’s Talent Management team (and latterly with support of the NDA) have been working with a number of education and training providers to put in place bespoke courses aimed at overcoming this shortage. In the absence of a steady stream of willing graduates from technical and management courses, the primary strategy has been to encourage life-long learning and up-skilling amongst its employees, targeting those who, for whatever reason upon leaving school, missed their opportunity to study and progress to train at a high level, but who possess that potential and have now developed a keenness to proceed with that study in later life. One Foundation Degree has been selected for development of a unique approach to higher education. The work of University of Central Lancashire and its West-Cumbrian education and training partners has featured as a case study in other media, but this paper reports on a fresh development within that work: co-delivery. Co-delivery relates to a partnership of educationalists and industrialists, with an emphasis on industrial numbers on the course development steering group. The means by which a significant proportion of the course is strongly workplace related are presented and the benefits and problems that this introduces are discussed. The course uses the industry as a vehicle to communicate concepts and develop problem-solving skills. Rather than the major vocational aspects being confined to just a few ‘workplace’ modules, the industry permeates all modules and co-delivery is part of a good many. A report is also made on the areas of provision where the major capability and expertise is located in just a few industrialists; and how that aspect is learned within a co-delivery course.
6
Jagger, Doug, and Dave Korpach. "Identifying and Accounting for Environmental Costs." In 1998 2nd International Pipeline Conference. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/ipc1998-2115.
Повний текст джерелаАнотація:
Protection of the environment has been and will continue to be a major issue facing the pipeline business around the world. Many of the decisions companies make relating to future investments and ongoing operations have environmental implications. These decisions can have significant cost implications that impact the bottom line of oil and gas transportation companies. Most companies do not track their environmental costs rigorously and thus, do not have a good understanding of the magnitude of these costs. Recently, we have undertaken studies to define and identify the major environmental cost drivers in the industry. As part of these studies, we identified some potential measures of environmental performance and actually measured certain aspects of environmental performance in pipeline companies. This paper will provide insights into the major environmental cost drivers in the industry and will define these cost drivers. It will provide some ideas on “what to measure” relating to environmental costs. Implementing an environmental cost management system is not a trivial task. It is difficult to assess how much of the cost associated with a certain investment is related to the environment. This can only be determined on a project by project basis and will also be unique from company to company. Although there is no “cookbook” approach to implementing this system, this paper will provide some guidance for implementing such a system.
7
GOWSIGA, M., and M. THAYAPARAN. "INCORPORATION OF CIRCULAR ECONOMY CONCEPT TO THE APPAREL INDUSTRY: LITERATURE REVIEW." In 13th International Research Conference - FARU 2020. Faculty of Architecture Research Unit (FARU), University of Moratuwa, 2020. http://dx.doi.org/10.31705/faru.2020.13.
Повний текст джерелаАнотація:
The apparel industry is one the most foreign exchange earning industries for developing countries. However, it is one of the notable polluting industries in the world too. Additionally, there are numerous factors affecting the economy of the industry, for example COVID 19, and the industry needs to reinvent from those issues by forcing itself to live. Thus, Circular Economy (CE) can act as a potential solution to address the issues related to both environmental and economic factors of the apparel industry. CE is a business strategy to gain economic benefit, minimise environmental impacts and increase the efficiency of resource consumption. CE concept has been practised in various countries such as China, Bangladesh, Europe, Australia and Germany. However, it is still a novel concept in Sri Lanka even though Sri Lankan apparel industry has a solid reputation globally for their high-quality, reliability, lead time, and social accountability. Introducing the CE concept into Sri Lankan apparel industry will help to overcome the financial issues in a sustainable way. With the intention of introducing CE concept to Sri Lankan apparel industry, this paper intends to review the application of CE in global context and in the context of apparel industry, their benefits and challenges in order to further investigate the suitability of CE concept to SL apparel industry. This paper is therefore based on a comprehensive literature review. Hence, it highlights the literature findings on the applicability of CE in apparel industry, its benefits and challenges when adopting CE into apparel industry. This basic finding will aid to assess the possibility of incorporating CE concept within the Sri Lankan apparel industry. The key findings of the research, environmental gain, economic benefit, resource optimisation and collaboration among stakeholders are the key benefits of CE. The main challenges are expensive, advanced technology, measuring the benefits especially financially, lack of support, knowledge, awareness, commitment and leadership, systematic regulation, social and cultural acceptance.
8
Chari, Arpita, Johan Vogt Duberg, Emma Lindahl, Johan Stahre, Mélanie Despeisse, Erik Sundin, Björn Johansson, and Magnus Wiktorsson. "Swedish Manufacturing Practices Towards a Sustainability Transition in Industry 4.0: A Resilience Perspective." In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-62394.
Повний текст джерелаАнотація:
Abstract The Swedish strategic innovation programme, Produktion2030, is a national long-term effort towards global industrial competitiveness addressing Swedish industry’s transition towards climate goals of the European Green Deal while simultaneously realising smart manufacturing and Industry 4.0 (I4.0). This paper investigated the extent of sustainability implementation and implications of I4.0 technologies through a nation-wide quantitative survey in Produktion2030’s 113 collaborative research projects. The analysis showed that 71% of the assessed projects included environmental aspects, 60% social aspects, and 45% Circular Economy (CE) aspects. Further, 65% of the projects implemented I4.0 technologies to increase overall sustainability. The survey results were compared with literature to understand how I4.0 opportunities helped derive sustainability and CE benefits. This detailed mapping of the results along with eight semi-structured interviews revealed that a majority of the projects implemented I4.0 technologies to improve resource efficiency, reduce waste in operations and incorporate CE practices in business models. The results also showed that Swedish manufacturing is progressing in the right direction of sustainability transition by deriving key resilience capabilities from I4.0-based enablers. Industries should actively adopt these capabilities to address the increasingly challenging and unpredictable sustainability issues arising in the world and for a successful transition towards sustainable manufacturing in a digital future.
9
Fabjan, Marija, Bojan Hertl, Metka Kralj, and Jozˇe Rojc. "Improvement of Institutional Radioactive Waste Management via Implementation of Environmental Management System." In ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2009. http://dx.doi.org/10.1115/icem2009-16094.
Повний текст джерелаАнотація:
Management of institutional radioactive waste in Slovenia is one of the main processes in the management system of Agency for Radwaste Management (ARAO). The management system integrates the quality management system ISO 9001 and the environmental management system that was certified according to the standard ISO 14001:2004 in October 2007. The certificate represents a permanent commitment of ARAO to improve the environmental management system and implement environmental planning. Environmental planning includes and maintains environmental objectives and targets in all ARAO’s activities, especially in managing the institutional radioactive waste that can have potential environmental impacts and is considered as a risky activity from the public view point. We defined a general ARAO’s register of environmental aspects with seven main groups of aspects. Each aspect was evaluated according to its impacts with the help of multiple criteria and only the aspects evaluated as significant are dealt with in further environmental planning. Environmental planning was implemented in the process of managing of institutional radioactive waste. Our methodology for evaluating the significance of environmental aspects showed three significant aspects. Appropriate environmental objectives and targets were defined for these aspects in a way that they were measurable, if applicable, consistent with the ARAO’s environmental policy. It was assured that they provided adequate environmental protection measures and protection of human health, compliance with national legal requirements and international directives dealing with radioactive waste management and that the production of radioactive waste was minimized. The environmental planning is carried out annually, and each year we are looking for opportunities to minimize potential environmental impacts of our service. In this paper, ARAO’s experience with environmental planning and the realization of the objectives and targets that have already been achieved, implemented and integrated in the process of managing of institutional radioactive waste are presented. The results and the successful completion of environmental programs contribute to optimization of the management system and the quality of ARAO’s process performance. Implementation of environmental management system according to ISO 14001 increased the satisfaction of producers of institutional radioactive waste management that come from medicine, research and industry. It is also part of confidence building by our stakeholders.
10
Beckmerhagen, I. A., H. P. Berg, S. V. Karapetrovic, and W. O. Willborn. "Auditing Supports the Integration of Management Systems in the Nuclear Industry." In 12th International Conference on Nuclear Engineering. ASMEDC, 2004. http://dx.doi.org/10.1115/icone12-49004.
Повний текст джерелаАнотація:
Integration of function-specific management systems in organizations is rapidly becoming a topic of interest for managers and auditors alike. This is mainly due to the proliferation of management system standards that foster compliance with the stated criteria for quality, environmental, occupational health and safety, social responsibility and other function-specific aspects of performance. While most of the available literature on this topic focuses on the integration of standards, there is comparatively little information available on how to actually build an integrated system internally. This paper hypothesizes that, besides using audits for the implementation of the available procedures, audits can provide an excellent basis for these integration efforts. Therefore the prerequisites, strategies and resources necessary for an effective audit in support of integrated management systems are discussed. The paper also describes how audits are used to improve a combined quality and safety management system in a German nuclear facility.