Готові списки джерел за темами / ON-TO-METHODOLOGY

Добірка наукової літератури з теми "ON-TO-METHODOLOGY"

Автор: Grafiati

Опубліковано: 11 вересня 2023

Оновлено: 16 квітня 2024

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "ON-TO-METHODOLOGY".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "ON-TO-METHODOLOGY"

Rakhmonov, Ikrom Abdukarimovich. "WAYS TO FOCUS ON METHODOLOGY OF CHOOSING ISSUES ACCORDING TO THE STUDENTS 'ABILITIES IN PHYSICS CLASSES." CURRENT RESEARCH JOURNAL OF PEDAGOGICS 02, no. 11 (November 1, 2021): 203–8. http://dx.doi.org/10.37547/pedagogics-crjp-02-11-37.

Повний текст джерела

Анотація:

This article discusses how to develop students' skills in physics lessons and how to choose problems. Preschool educational institutions and schools are responsible for the education of students with modern scientific and technical knowledge and understanding, providing quality education and the first lessons in the harmonious development of young people, the proper development of children's worldview.

Стилі APA, Harvard, Vancouver, ISO та ін.

Block, Walter. "Reply to Caplan on Austrian economic methodology." Corporate Ownership and Control 4, no. 3 (2007): 312–22. http://dx.doi.org/10.22495/cocv4i3c2p8.

Повний текст джерела

Анотація:

A Methodenstreit is a debate in economics concerning the philosophy of social science. It involves the issue of which is the property method to pursue in the dismal science. Although this type of debate had its origins two centuries ago, the present paper is a contribution to a more modern Methodenstreit begun by Caplan (1999). It addresses some of the fundamental issues in economics: is this discipline best to be thought of along the lines of an empirical science, such as physics or chemistry (the view of the logical positivist school), or is it more properly described as a branch of logic or mathematics (the perspective of Austrian economics)? Is the argument synthetic a priori a coherent concept (the praxeological perspective), or a mere trivial tautology? Can empirical work (e.g., econometric regression equations) test economic axioms (are there any such things?), or merely illustrate them? These issues underlay the present debate over such issues as indifference (can there be any such thing in economics?), cardinality (is there room in economics for cardinal numbers, or is only ordinality to be tolerated?), continuity (are neoclassical findings the result of an artificial smooth curve assumption, or do they stem from real elements of the economy?), income and substitution effects (can there be backward bending supply curves and upward sloping demand curves?) and demonstrated preference and welfare economics (can government involvement in the economy possibly improve matters, or is this a logical contradiction in terms?)

Стилі APA, Harvard, Vancouver, ISO та ін.

Kulkarni, Manjiri, and Dr S. P. Meharunnisa. "Study on Transformation to Universal Verification Methodology." International Journal for Research in Applied Science and Engineering Technology 10, no. 8 (August 31, 2022): 1847–49. http://dx.doi.org/10.22214/ijraset.2022.46466.

Повний текст джерела

Анотація:

Abstract: There are many approaches to the RTL design Verification. The different types of approach can be software simulation based, hardware accelerated simulation, formal verification etc. It helps to verify the correctness of the design, functional implementation and enhancing the design at every stage. Transition to Systemverilog has been done to cope up with the shrinking size of technology nodes and Time to market. In advanced times, the systems are to be designed in a generic way. The number of registers in the architecture increases as the number of combinations increases. Additionally, memory size is increasing as a result of the increased market need for data storage. An innovative approach is needed to access and validate the large variety of registers and the memory. A SystemVerilog class library called UVM was created specifically to support the creation of modular, reusable verification components and test-benches. Since it is an industry standard, you can use UVM IP that you obtain from other sources in your environment. You'll need to construct everything from scratch if you don't utilise UVM.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zollinger, J., and D. Daloz. "On the sampling methodology to characterize microsegregation." Materials Characterization 62, no. 11 (November 2011): 1058–65. http://dx.doi.org/10.1016/j.matchar.2011.07.015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

SUGIMOTO, Yoichi, Masao ARAKAWA, and Masahiko ISHIMARU. "A Study on Methodology to Make Team." Proceedings of Design & Systems Conference 2016.26 (2016): 3405. http://dx.doi.org/10.1299/jsmedsd.2016.26.3405.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

SUGIMOTO, Yoichi, Masao ARAKAWA, and Masahiko ISHIMARU. "A study on methodology to make team." Proceedings of Design & Systems Conference 2017.27 (2017): 2507. http://dx.doi.org/10.1299/jsmedsd.2017.27.2507.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cook, Steven. "On the semantic approach to econometric methodology." Journal of Economic Methodology 12, no. 1 (March 2005): 117–23. http://dx.doi.org/10.1080/1350178042000330922.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Atxamovna, Israilova Dildora. "IMPROVING METHODOLOGY OF TEACHING ENGLISH TO PRESCHOOL CHILDREN THROUGH FAIRY TALES (ON THE EXAMPLE OF PREPARATORY GROUPS)." CURRENT RESEARCH JOURNAL OF PEDAGOGICS 03, no. 04 (April 1, 2022): 28–32. http://dx.doi.org/10.37547/pedagogics-crjp-03-04-07.

Повний текст джерела

Анотація:

When teaching a foreign language at an early stage, the question arises of what to take as a meaningful basis for learning. A fairy tale, due to its specific features, should act as a meaningful basis for education. The presence of fiction, fantasy in a fairy tale makes it more valuable from a methodological point of view compared to other literary genres.

Стилі APA, Harvard, Vancouver, ISO та ін.

Harden, Jeffrey J., and Justin E. Esarey. "Introduction to the Symposium on Teaching Political Methodology." PS: Political Science & Politics 55, no. 1 (December 21, 2021): 203–5. http://dx.doi.org/10.1017/s1049096521001359.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gelsthorpe, Loraine. "Response to Martyn Hammersley's Paper `on Feminist Methodology'." Sociology 26, no. 2 (May 1992): 213–18. http://dx.doi.org/10.1177/0038038592026002004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "ON-TO-METHODOLOGY"

Madau, Maxime. "A methodology to localise EMFI areas on Microcontrollers." Thesis, Montpellier, 2019. http://www.theses.fr/2019MONTS045.

Повний текст джерела

Анотація:

De nos jours, la sécurité des systèmes embarqués prend une place de plus en plus importante. Notamment du fait de l'augmentation de la part du marché prise par l'IoT et le marché automobile.Afin de justifier un certain niveau de sécurité ces systèmes embarqués doivent subir des audits de sécurité afin soit d'obtenir une certification, qui peut s'avérer nécessaire pour adresser certains marché, ou alors plus simplement pour éviter de ternir le nom de l'entreprise en cas de faille.Le chemin d'attaque le plus efficace est probablement l'injection de faute obtenue par une violation volontaire des conditions d'utilisation d'un circuit.De cette faute différent scénarios sont possibles, soit celle-ci est couplée à des outils statistiques pour obtenir la clef secrète d'un algorithme cryptographique, soit elle permet une escalade de privilège.Cette thèse se concentre sur les fautes induites par perturbation électromagnétique, qui est le support qui offre le meilleur compromis précision coût.Si les attaques par injections de fautes se sont montrées maintes fois efficaces dans la littérature, elles possèdent néanmoins un défaut conséquent dans le cadre de l'évaluation sécuritaire. Ce défaut vient du très grand nombre de paramètres offert par l'injection de faute à son utilisateur. Si on ajoute à cela les contraintes temporelles inhérentes à l'évaluation, on se rend compte de la difficulté de garantir la sécurité d'un produit contre de telles menaces.De ce constat il devient évident que des métriques ou stratégie sont nécessaire pour améliorer la qualité des évaluations.Cette thèse est un premier pas dans cette direction et propose de résoudre la complexité spatiales lors d'une campagne évaluation face à l'injection de faute électromagnétique.L'idée est de définir une métrique se basant sur des expérimentations ainsi que l'état de l'art pour réduire l'espace à tester à quelques positions qui vont presque certainement mener à une faute du fait de leur propriété physique.Dans une première partie la création d'un tel critère est présentée. Celui-ci se base sur un modèle simplifié du couplage sonde d'injection circuit et sur le modèle de faute le plus récent.Ensuite les limites d'un tel critère sont analysées afin d'en trouver une amélioration.Cependant, l'injection de faute ne permet pas seulement d'attaquer directement une cible, elle peut aussi diminuer sa sécurité en visant ses contre-mesures.La plupart des contre-mesures ont en commun l'utilisation d'un générateur de nombre aléatoire, c'est pourquoi la robustesse d'un générateur aléatoire récent sera évaluée dans une troisième partie.De cette analyse un chemin d'attaque sera dérivé dans le cadre de l'injection de faute via ondes électromagnétiques
Today, security of embedded devices is put in the limelight with the increasing market share of both IoT and automotive.To ensure a proper level of security to its customer such embedded components must undergo pentesting either to obtain some certifications to address security market but also to avoid tarnishing the name of the firm in case of vulnerability.Amongst the various attack paths, one of most threatening is the voluntary violation of operation condition to induce a fault on a circuit.These faults are then used for privilege escalation or combined with statistic tools to recover cryptographic keys. This thesis focuses on the use of electromagnetic field to generate such faults, this medium being the one that offers the best trade-off between cost and accuracy.The efficiency of such family of attack has already been demonstrated in the literature. Yet fault injection techniques shared a common problem which root cause is the amount of parameter an evaluator has to tweaks to obtain a fault. Therefore, it is hard to state whether a target is protected against fault injection since evaluation is bounded in time, thus exhaustive search is not an option.Metrics or strategies should be defined to get the most out of up to date fault injection methods.This thesis is a first step towards defining such metrics, and proposed to tackle the space complexity of EM fault injection. In other words, according to the attack scenario we developed metrics or strategy relying on both experimentation and state of the art. The aims of those metrics/strategy being to reduce the space on the DUT that undergo electromagnetic emanation to the most likely to be faulted area.In a first part, a criterion based on a basic model of the coupling between the injection probes and the circuit as well as today fault model will be developed.This criterion is then analysed and a refinement is proposed.Yet fault injection could also be used to nullify countermeasure that disable some attack vectors. Most of those countermeasures have in common the use of a true random generator.Thence in a second part we evaluate the robustness of an up to date true random number generator against electromagnetic perturbation.From this analysis we derived which parts of true random number generator are more relevant to be targeted using electromagnetic waves

Стилі APA, Harvard, Vancouver, ISO та ін.

Gurhan, Ozkan. "A methodology to measure the metal erosion on recovered armatures." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2001. http://handle.dtic.mil/100.2/ADA401404.

Повний текст джерела

Анотація:

Thesis (M.S. in Physics) Naval Postgraduate School, Dec. 2001.
Thesis advisors, William B. Maier II, Francis Stefani. "December 2001." Includes bibliographical references (p. 93). Also available in print.

Стилі APA, Harvard, Vancouver, ISO та ін.

Carlshamre, Pär. "A usability perspective on requirements engineering : from methodology to product development." Doctoral thesis, Linköpings universitet, MDALAB - Human Computer Interfaces, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-4976.

Повний текст джерела

Анотація:

Usability is one of the most important aspects of software. A multitude of methods and techniques intended to support the development of usable systems has been provided, but the impact on industrial software development has been limited. One of the reasons for this limited success is the gap between traditional academic theory generation and commercial practice. Another reason is the gap between usability engineering and established requirements engineering practice. This thesis is based on empirical research and puts a usability focus on three important aspects of requirements engineering: elicitation, specification and release planning. There are two main themes of investigation. The first is concerned with the development and introduction of a usability-oriented method for elicitation and specification of requirements, with an explicit focus on utilizing the skills of technical communicators. This longitudinal, qualitative study, performed in an industrial setting in the first half of the nineties, provides ample evidence in favor of a closer collaboration between technical communicators and system developers. It also provides support for the benefits of a task-oriented approach to requirements elicitation. The results are also reflected upon in a retrospective paper, and the experiences point in the direction of an increased focus on the specification part, in order to bridge the gap between usability engineering and established requirements management practice. The second represents a usability-oriented approach to understanding and supporting release planning in software product development. Release planning is an increasingly important part of requirements engineering, and it is complicated by intricate dependencies between requirements. A survey performed at five different companies gave an understanding of the nature and frequency of these interdependencies. This knowledge was then turned into the design and implementation of a support tool, with the purpose of provoking a deeper understanding of the release planning task. This was done through a series of cooperative evaluation sessions with release planning experts. The results indicate that, although the tool was considered useful by the experts, the initial understanding of the task was overly simplistic. As a result, a number of design implications are proposed.
On the day of the public defence the status of article VI was: Submitted.

Стилі APA, Harvard, Vancouver, ISO та ін.

Carlshamre, Pär. "A usability perspective on requirements engineering : from methodology to product development /." Linköping : Univ, 2001. http://www.ep.liu.se/diss/science_technology/07/26/index.html.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cornel, Caralea May. "A Methodology to Measure the Impact of Diversity on Cybersecurity Team Effectiveness." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/8594.

Повний текст джерела

Анотація:

In recent years, the definition of cybersecurity professional has been diluted to include more individuals, particularly women, to be included. Depending on the definition used, women currently comprise between 11% and 25% of the cybersecurity workforce. While multiple studies have indicated the benefits to diverse teams, research in the cybersecurity area is lacking.This research proposes a framework that uses a modified escape-the-room gamified scenario to measure the effectiveness of cybersecurity teams in technical problem-solving. The framework presents two routes, incident response and penetration testing, the participants can choose. In a preliminary study, this framework is used to show the combination of gender diversity and prior cybersecurity experience and/or cybersecurity knowledge, particularly in women, are found to be significant in reducing the time taken to solve cybersecurity tasks in the incident response, and penetration testing domains.In conclusion, opportunities for extending this research into a large-scale study are discussed, along with other applications of cybersecurity escape-rooms.

Стилі APA, Harvard, Vancouver, ISO та ін.

Oliveira, Rodrigues Antonio Wendell de. "A methodology to develop high performance applications on GPGPU architectures : application to simulation of electrical machines." Thesis, Lille 1, 2012. http://www.theses.fr/2012LIL10029/document.

Повний текст джерела

Анотація:

Les phénomènes physiques complexes peuvent être simulés numériquement par des techniques mathématiques. Ces simulations peuvent mener ainsi à la résolution de très grands systèmes. La parallélisation des codes de simulation numérique est alors une nécessité pour parvenir à faire ces simulations en des temps non-exorbitants. Le parallélisme s’est imposé au niveau des architectures de processeurs et les cartes graphiques sont maintenant utilisées pour des fins de calcul généraliste, aussi appelé "General-Purpose GPU", avec comme avantage évident l’excellent rapport performance/prix. Cette thèse se place dans le domaine de la conception de ces applications hautes-performances pour la simulation des machines électriques. Nous fournissons une méthodologie basée sur l’Ingénierie Dirigées par les Modèles (IDM) qui permet de modéliser une application et l’architecture sur laquelle l’exécuter, afin de générer un code OpenCL. Notre objectif est d’aider les spécialistes en algorithmes de simulations numériques à créer un code efficace qui tourne sur les architectures GPGPU. Pour cela, une chaine de compilation de modèles qui prend en compte plusieurs aspects du modèle de programmation OpenCL est fournie. De plus, nous fournissons des transformations de modèles qui regardent des niveaux d’optimisations basées sur les caractéristiques de l’architecture.Comme validation expérimentale, la méthodologie est appliquée à la création d’une application qui résout un système linéaire issu de la Méthode des Éléments Finis. Dans ce cas nous montrons, entre autres, la capacité de la méthodologie de passer à l’échelle par une simple modification de la multiplicité des unités GPU disponibles
Complex physical phenomena can be numerically simulated by mathematical techniques. Usually, these techniques are based on discretization of partial differential equations that govern these phenomena. Hence, these simulations enable the solution of large-scale systems. The parallelization of algorithms of numerical simulation, i.e., their adaptation to parallel processing architectures, is an aim to reach in order to hinder exorbitant execution times. The parallelism has been imposed at the level of processor architectures and graphics cards are now used for purposes of general calculation, also known as "General- Purpose GPU". The clear benefit is the excellent performance/price ratio. This thesis addresses the design of high-performance applications for simulation of electrical machines. We provide a methodology based on Model Driven Engineering (MDE) to model an application and its execution architecture in order to generate OpenCL code. Our goal is to assist specialists in algorithms of numerical simulations to create a code that runs efficiently on GPGPU architectures. To ensure this, we offer a compilation model chain that takes into account several aspects of the OpenCL programming model. In addition, we provide model transformations that analyze some levels of optimizations based on the characteristics of the architecture. As an experimental validation, the methodology is applied to the creation of an application that solves a linear system resulting from the Finite Element Method (FEM). In this case, we show, among other things, the ability of the methodology of scaling by a simple modification of the number of available GPU devices

Стилі APA, Harvard, Vancouver, ISO та ін.

Aguilar, Juan Pablo. "Experimental methodology to assess the effect of coatings on fiber properties using nanoindentation." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45781.

Повний текст джерела

Анотація:

Current body armor technologies need further improvements in their design to help reduce combat injuries of military and law enforcement personnel. Kevlar-based body armor systems have good ballistic resistance up to a certain ballistic threat level due to limitations such as decreased mobility and increased weight [1,2]. Kevlar fibers have been modified in this work using a nano-scale boron carbide coating and a marked increase in the puncture resistance has been experimentally observed. It is hypothesized that this improvement is due to the enhancement of the mechanical properties of the individual Kevlar fibers due to the nano-scale coatings. This study presents a comprehensive experimental investigation of individual Kevlar fibers based on nanoindentation to quantify the cause of the enhanced puncture resistance. The experimental setup was validated using copper wires with a diameter size in the same order of magnitude as Kevlar fibers. Results from nanoindentation did not show significant changes in the modulus or hardness of the Kevlar fibers. Scanning Electron Microscopy revealed that the coated fibers had a marked change in their surface morphology. The main finding of this work is that the boron carbide coating did not affect the properties of the individual fibers due to poor adhesion and non-uniformity. This implies that the observed enhancement in puncture resistance originates from the interaction between fibers due to the increase in roughness. The results are important in identifying further ways to enhance Kevlar puncture resistance by modifying the surface properties of fibers.

Стилі APA, Harvard, Vancouver, ISO та ін.

Vazquez, Job Andres. "A management methodology to control the impact of engineering changes on marine projects." Thesis, University of Newcastle Upon Tyne, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.556137.

Повний текст джерела

Анотація:

Engineering changes are common in manufacturing industries. Engineering changes can be found from the conception of the project until its culmination. In general, engineering changes are difficult to quantify. Engineering changes vary from design changes up to production changes. The management of these changes normally ends up in variation orders and is time consuming. In the Marine Industry, they are widely recognised, but hardly researched and quantified. The approach to develop a new tool is necessary to understand not only the management of engineering changes, but also the impact quantification on the project overall. The research to develop a new tool consists on developing case studies to implement a powerful methodology in live projects. The integration of different techniques from other industries that widely recognise the management of engineering changes makes an opportunity to quantify engineering changes through this methodology. The new methodology includes coverage, impact representation, decision making process, lean improvement and analysis from the experts. The impact representation and the integration of tracking mechanisms are a key tool for researchers and practitioners to make decision in marine projects.

Стилі APA, Harvard, Vancouver, ISO та ін.

Anandarao, Sudhir. "Application of the risk assessment methodology to level cross accidents on JR East." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/39055.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

York, Richard H. "A new methodology to measure body/self-concept based on personal construct theory." Thesis, Boston University, 1987. https://hdl.handle.net/2144/38120.

Повний текст джерела

Анотація:

Thesis (Ph.D.)--Boston University
PLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.
The objective of this dissertation is to describe and test the reliability and validity of the Body/Self-Concept Methodology (BSC). It measures body attitudes as consequences of body/self-concept. The BSC Methodology was constructed from insights of the debate about the self in American psychology. This debate included philosophical, neurological, psychological, spiritual, and theological issues. These were integrated into Kelly's methodology producing a psychotheological research perspective. This methodology consists of a research philosophy, theory and measures for body/self-concept, and statistical methods. The BSC Method is the six techniques for collecting qualitative and quantitative data. This collection depended on a computer. The quantitative data are ratings of bipolar adjective pairs and a Q-sort of body items. The BSC Method was tested in a study with 40 subjects. The qualitative results included affective self-report data. It was concluded that some of these results implied that this method pierced denial defense mechanisms. The quantitative results were highly valid and reliable for the attitude ratings, but less for the Q-sort. It was concluded that there was sufficient reliability and validity to justify further development of the BSC Methodology. The next step is to write a computer program for data collection and analysis.
2031-01-01

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "ON-TO-METHODOLOGY"

California Environmental Protection Agency. Air Resources Board., ed. Methodology to calculate emission factors for on-road motor vehicles. [Sacramento]: California Air Resources Board, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Petrasch, P. Methodology to collect data on decommissioning costs and occupational radiation exposure. Luxembourg: Commission of the European Communities, Directorate-General XIII, Information Technologies and Industries, and Telecommunications, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hu, Jumin. From TESL in Canada to TEFL in China: A focus on methodology. London, Ont: Faculty of Graduate Studies, University of Western Ontario, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Peshat isn't so simple: Essays on developing a religious methodology to Bible study. New York, NY: published & distributed by Kodesh Press L.L.C., 2014.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lorenz, Angela. The logical way to become an artist: Mathematical reasoning and methodology on back. [Bologna]: [Lorenz], 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

The logical way to become an artist: Mathematical reasoning and methodology on back. [Manchester, MA]: [Angela Lorenz Artist Books], 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Elen, Jan. Blocks on the road to instructional design prescriptions: A methodology for I.D.-research exemplified. Leuven, Belgium: Leuven University Press, 1995.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

M, Rafiq, and University of Nairobi. Population Studies and Research Institute., eds. Training documents for the short course on research methodology as applied to population and development. Nairobi: Population Studies and Research Institute, University of Nairobi, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gasper, Desmond. Policy analysis and evaluation: An essay on methodology and education with reference to development studies. Norwich: University of East Anglia, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

United States. Government Accountability Office., United States. Congress. Senate. Committee on Finance., and United States. Congress. House. Committee on Ways and Means., eds. Medicare hospice care: Modifications to payment methodology may be warranted : report to the Committee on Finance, U.S. Senate, and the Committee on Ways and Means, House of Representatives. Washington, D.C: United States Government Accountability Office, 2004.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "ON-TO-METHODOLOGY"

Sure, York, Steffen Staab, and Rudi Studer. "On-To-Knowledge Methodology (OTKM)." In Handbook on Ontologies, 117–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-24750-0_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Boland, Lawrence. "On Economic Methodology Literature from 1963 to Today." In The Impact of Critical Rationalism, 19–29. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-90826-7_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ando, Kotoji, Katsuyuki Matsui, and Hirohito Eto. "Study on Methodology to Increase Fatigue Limit of Gears." In Shot Peening, 23–30. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527606580.ch3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chapuis, Bastien, Pierre Calmon, and Frédéric Jenson. "Recommendation Documents on Statistical Methodology Dedicated to POD Analysis." In IIW Collection, 3–4. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-62659-8_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Leake, David, and David Crandall. "On Bringing Case-Based Reasoning Methodology to Deep Learning." In Case-Based Reasoning Research and Development, 343–48. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-58342-2_22.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dienel, Peter C. "Contributing to Social Decision Methodology: Citizen Reports on Technological Projects." In Social Decision Methodology for Technological Projects, 133–51. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-2425-3_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Papaja, Katarzyna. "How to Teach in CLIL? Some Remarks on CLIL Methodology." In Second Language Learning and Teaching, 229–40. Heidelberg: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00188-3_15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hernández-Arellano, Juan Luis, Julián Israel Aguilar-Duque, and Karla Gabriela Gómez-Bull. "Methodology to Determine Product Dimensions Based on User Anthropometric Data." In Management and Industrial Engineering, 373–85. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56871-3_18.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Amato, Flora, Giovanni Cozzolino, Antonino Mazzeo, and Francesco Moscato. "An Advanced Methodology to Analyse Data Stored on Mobile Devices." In Cyberspace Safety and Security, 144–54. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01689-0_12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Trojan, Flavio, and Danielle Costa Morais. "Load Areas-Sorting Methodology to Aid Maintenance on Power Distribution Networks." In Industrial Engineering and Operations Management I, 183–94. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14969-7_16.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "ON-TO-METHODOLOGY"

Sugimoto, Yoichi, Masao Arakawa, and Masahiko Ishimaru. "A Study on Methodology to Make Team: Methodology — Phase II." In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-67050.

Повний текст джерела

Анотація:

Improvement in labor productivity is a common problem in each country. In particular, in Japan where the productive age population is decreasing, it is necessary to steadily advance efforts for the improvement at various sites throughout the entire society. In doing so, in order to make it prevail over broad areas, it is necessary to consider that on-site holding resources can be utilized, that it can be easily introduced, and that it will surely be effective. Therefore, we have focused on improving the way of collaboration from an angle of “person’s personality”. Specifically, we have aimed to build a methodology, for a “team” that is a collaborative form widely introduced and utilized at companies and educational sites, which enhances the effectiveness of team activities. As for the overall structure of the methodology, we have designed it with a three-layer structure in order to clarify separation from other intellectual properties and consideration to ethical aspects. That is, the designed methodology comprises the following three phases. Phase I: a team formation methodology; Phase II: a team management methodology; and Phase III: a team development support methodology. Study results of Phase I were presented at the 26th Design Engineering and System Division Lecture by the Japan Society of Mechanical Engineers (JSME). In this study, we have used the methodology of Phase I to devise, as a method included in Phase II, three Rules for creating a team environment that makes it easy for “introverted” persons in Jungian psychology to express their opinions. Then, we have conducted parallel group randomized trials comparing an intervention group with a control group, analyzed the results by an analysis method such as Data Envelopment Analysis (DEA), and verified the effectiveness of the devised method. As a result, the findings have revealed that teams in which the team management was carried out according to the devised method tends to be more effective and prone to excellent effectiveness.

Стилі APA, Harvard, Vancouver, ISO та ін.

Dong-Mei Yu and Jian-An Fang. "Research on a methodology to model speech emotion." In 2007 International Conference on Wavelet Analysis and Pattern Recognition. IEEE, 2007. http://dx.doi.org/10.1109/icwapr.2007.4420783.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pournaghshband, Vahab, Sepideh Hashemzadeh, and Peter Reiher. "How to Detect Middleboxes : Guidelines on a Methodology." In The Sixth International Conference on Wireless & Mobile Networks. Academy & Industry Research Collaboration Center (AIRCC), 2014. http://dx.doi.org/10.5121/csit.2014.41209.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Maia Junior, Marcio Domingues, Antonio Carlos Fernandes, Marcela Trindade, and Andre Ramiro. "Methodology to Evaluate Slamming Loads on Ocean Platforms." In ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/omae2008-57629.

Повний текст джерела

Анотація:

The purpose of the study is suggest a methodology to be applied in ocean platforms and ships in order to appraise the maximum impact pressure due to the slamming occurrence in the hull shape near its bottom or horizontal regions. This methodology uses a theory based on potential flow. However, there are some phenomena such as creation of a compressible air pocket between the body and free surface at the impact moment that requires a more complete theory and or experimental methods. This gives rise to experimental coefficients to reduce the theoretical errors. The procedure presented here goes by the platform motion dynamics and “impact topology” to allow the potential to be used. Due to the complexity of the phenomenon studied and need for certifying accuracy and precision of the results, tank tests at the LabOceano model basin were carried out. The results showed a good fitting between numerical results and experiments. It should also be pointed out that the pressure sensor used in these experiments gives a pressure distribution over the instrumented area what brings more reliability on the results and a better visibility to the slamming phenomenon. Lastly the methodology in this work stands out as an important tool to evaluate slamming loads.

Стилі APA, Harvard, Vancouver, ISO та ін.

Samudrala, Pavan, Woong Jae Chung, Lokesh Subramany, Haiyong Gao, Nyan Aung, Seung Chul Oh, Shawn Lee, Erik Delvigne, and Blandine Minghetti. "Novel methodology to optimize wafer alignment to enhance 14nm on product overlay." In SPIE Advanced Lithography, edited by Andreas Erdmann and Jongwook Kye. SPIE, 2017. http://dx.doi.org/10.1117/12.2258137.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jing, Zhang, Zhang Yu, He Yan, and Xu Fei. "Research on Capability Architecture Construction Methodology to System of Systems." In 2020 IEEE 15th International Conference of System of Systems Engineering (SoSE). IEEE, 2020. http://dx.doi.org/10.1109/sose50414.2020.9130557.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Marzo, Iosu, Jon Andoni Barrena, and Alain Sanchez-Ruiz. "Methodology to Evaluate Converter Structures based on 3L NPC PEBBs." In IECON 2020 - 46th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2020. http://dx.doi.org/10.1109/iecon43393.2020.9254580.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gomes, Cleber Willian. "Diagnose Methodology Based on Bayesian Net to Indicate Failure Probability." In SAE Brasil 2010 Congress and Exhibit. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2010. http://dx.doi.org/10.4271/2010-36-0299.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shankar, Ravi, James Marco, and Francis Assadian. "A methodology to determine drivetrain efficiency based on external environment." In 2012 IEEE International Electric Vehicle Conference (IEVC). IEEE, 2012. http://dx.doi.org/10.1109/ievc.2012.6183192.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hong, David, Arjen Hoekstra, and Marvanne DeClerck. "IFF’s Perspective on Testing Methodology Improvements to Enhance Detergent Differentiation." In Virtual 2021 AOCS Annual Meeting & Expo. American Oil Chemists’ Society (AOCS), 2021. http://dx.doi.org/10.21748/am21.390.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "ON-TO-METHODOLOGY"

Snell, Mark K. Progress to Date on Developing the NUSAM Methodology Document. Office of Scientific and Technical Information (OSTI), April 2015. http://dx.doi.org/10.2172/1178357.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

KELLY, D. L., and J. H. OBRIEN. Methodology for Identification of Testing to Conduct on Type A and Industrial Packagings. Office of Scientific and Technical Information (OSTI), April 2001. http://dx.doi.org/10.2172/806889.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bailey, Timothy J. US/UK Sensor-To-Shooter Multinational C4 Interoperability Study Force-On-Force Effectiveness Methodology. Fort Belvoir, VA: Defense Technical Information Center, October 2000. http://dx.doi.org/10.21236/ada468602.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Duthinh, Dat, Joseph A. Main, and Brian M. Phillips. Methodology to Analyze Wind Pressure Data on Components and Cladding of Low-Rise Buildings. National Institute of Standards and Technology, December 2015. http://dx.doi.org/10.6028/nist.tn.1903.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

LaViolet, Lucas A., and Carl A. Curling. 2013 Review on the Extension of the AMedP-8(C) Methodology to New Agents, Materials, and Conditions. Fort Belvoir, VA: Defense Technical Information Center, June 2014. http://dx.doi.org/10.21236/ada614609.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

LaViolet, Lucas A., Julia K. Burr, and Carl A. Curling. 2012 Review on the Extension of the AMedP-8(C) Methodology to New Agents, Materials, and Conditions. Fort Belvoir, VA: Defense Technical Information Center, October 2013. http://dx.doi.org/10.21236/ada594826.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Curling, Carl A., Lucas A. LaViolet, and Julia K. Burr. 2010 Review on the Extension of the AMedP-8(C) Methodology to New Agents, Materials, and Conditions. Fort Belvoir, VA: Defense Technical Information Center, December 2010. http://dx.doi.org/10.21236/ada545631.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Fabio Morales, Leonardo, Eleonora Dávalos, and Raquel Zapata. Estimating Vacancy Stocks from Aggregated Data on Hires: A Methodology to Study Frictions in the Labor Market. Banco de la República de Colombia, April 2023. http://dx.doi.org/10.32468/be.1228.

Повний текст джерела

Анотація:

We develop a methodology that recovers an estimate of the average stock of vacancies using the information on aggregated hires. We show that our prediction of the vacancy stock is unbiased, and it captures well the level and the dynamics of the United States job opening positions reported in the Job Openings and Labor Turnover Survey. We use the methodology to predict vacancies in Colombia for formal and informal salaried workers; together with unemployment, we estimate Beveridge curves and matching functions by occupations, which allows us to study the nature of the efficiency, frictions, and mismatches for different occupations. We find that the formal labor market of technicians is the most inefficient of them all; this inefficiency comes from the mismatch between the abilities of the workers and the requirement of the vacancies. Reducing friction in this occupation will require education and job-oriented training policies. In contrast, the frictions in the market for unskilled workers come from informational lacks. The reductions of friction, in this case, will come from better intermediation and active search policies.

Стилі APA, Harvard, Vancouver, ISO та ін.

Weier, Dennis R., Kevin K. Anderson, and Herbert S. Berman. Riser Difference Uncertainty Methodology Based on Tank AY-101 Wall Thickness Measurements with Application to Tank AN-107. Office of Scientific and Technical Information (OSTI), March 2005. http://dx.doi.org/10.2172/15016054.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Soldat, J. K., K. R. Price, and W. H. Rickard. Methodology used to compute maximum potential doses from ingestion of edible plants and wildlife found on the Hanford Site. Office of Scientific and Technical Information (OSTI), October 1990. http://dx.doi.org/10.2172/6447077.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!