Добірка наукової літератури з теми "Multiaxial"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Multiaxial".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Multiaxial"
Kosaka, Rui, Fumio Ogawa, Takamoto Itoh, and Masao Sakane. "Creep Damage Evaluation using Uniaxial Miniature Specimens for Multiaxially Damaged Components." MATEC Web of Conferences 300 (2019): 07003. http://dx.doi.org/10.1051/matecconf/201930007003.
Повний текст джерелаWang, C. H., and M. W. Brown. "Life Prediction Techniques for Variable Amplitude Multiaxial Fatigue—Part 1: Theories." Journal of Engineering Materials and Technology 118, no. 3 (July 1, 1996): 367–70. http://dx.doi.org/10.1115/1.2806821.
Повний текст джерелаOzdemir, Huseyin, and Kadir Bilisik. "Off-Axis Flexural Properties of Multiaxis 3D Basalt Fiber Preform/Cementitious Concretes: Experimental Study." Materials 14, no. 11 (May 21, 2021): 2713. http://dx.doi.org/10.3390/ma14112713.
Повний текст джерелаLu, Fucong, Kun Zhang, Yuhang Hou, and Zhiwen Wu. "Investigation on Temperature-Dependent Multiaxial Ratchetting of Polycarbonate by a Novel Experimental Method." Advances in Materials Science and Engineering 2022 (May 13, 2022): 1–9. http://dx.doi.org/10.1155/2022/6577569.
Повний текст джерелаWang, Lei, Wu Zhen Li, and Tian Zhong Sui. "Review of Multiaxial Fatigue Life Prediction Technology under Complex Loading." Advanced Materials Research 118-120 (June 2010): 283–88. http://dx.doi.org/10.4028/www.scientific.net/amr.118-120.283.
Повний текст джерелаShirafuji, Nakao, Kenji Shimomizuki, Masao Sakane, and Masateru Ohnami. "Tension-Torsion Multiaxial Low Cycle Fatigue of Mar-M247LC Directionally Solidified Superalloy at Elevated Temperature." Journal of Engineering Materials and Technology 120, no. 1 (January 1, 1998): 57–63. http://dx.doi.org/10.1115/1.2806838.
Повний текст джерелаBercelli, Lorenzo, Cédric Doudard, and Sylvain Moyne. "Taking into account the non-proportional loading effect on high cycle fatigue life predictions obtained by invariant-based approaches." MATEC Web of Conferences 300 (2019): 12003. http://dx.doi.org/10.1051/matecconf/201930012003.
Повний текст джерелаZhao, Er Nian, and Wei Lian Qu. "Multiaxial Fatigue Life Prediction of Metallic Materials Based on Critical Plane Method under Non-Proportional Loading." Key Engineering Materials 730 (February 2017): 516–20. http://dx.doi.org/10.4028/www.scientific.net/kem.730.516.
Повний текст джерелаStouffer, D. C., V. G. Ramaswamy, J. H. Laflen, R. H. Van Stone, and R. Williams. "A Constitutive Model for the Inelastic Multiaxial Response of Rene’ 80 at 871C and 982C." Journal of Engineering Materials and Technology 112, no. 2 (April 1, 1990): 241–46. http://dx.doi.org/10.1115/1.2903315.
Повний текст джерелаHiyoshi, Noritake, and Yoshihisa Iriyama. "Development of Tension-Torsion Multiaxial Creep Testing Apparatus for Heat Resisting Steel." MATEC Web of Conferences 159 (2018): 02015. http://dx.doi.org/10.1051/matecconf/201815902015.
Повний текст джерелаДисертації з теми "Multiaxial"
Liu, Mu-Hsin. "Multiaxial Fatigue Testing Machine." Ohio University / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1266241731.
Повний текст джерелаAlsayed, Mahmoud Ibrahim. "Rock behaviour under multiaxial compression." Thesis, University of Newcastle Upon Tyne, 1996. http://hdl.handle.net/10443/1565.
Повний текст джерелаTomlinson, Philip S. "Multiaxial deformation of AZ80 magnesium alloy." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45362.
Повний текст джерелаTriantafillou, Thanasis C. (Thanasis Christos). "Multiaxial failure criteria for celluar materials." Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/1721.1/14315.
Повний текст джерелаGonçalves, Camilla de Andrade. "Fadiga multiaxial policíclica : modelagem e simulação." reponame:Repositório Institucional da UnB, 2006. http://repositorio.unb.br/handle/10482/3638.
Повний текст джерелаSubmitted by Érika Rayanne Carvalho (carvalho.erika@ymail.com) on 2009-10-01T02:06:54Z No. of bitstreams: 1 2006_Camilla de Andrade Gonçalves.pdf: 1648259 bytes, checksum: 4965bdd7c725fcd3f0af9b6d41eacd12 (MD5)
Approved for entry into archive by Marília Freitas(marilia@bce.unb.br) on 2010-02-12T23:02:17Z (GMT) No. of bitstreams: 1 2006_Camilla de Andrade Gonçalves.pdf: 1648259 bytes, checksum: 4965bdd7c725fcd3f0af9b6d41eacd12 (MD5)
Made available in DSpace on 2010-02-12T23:02:17Z (GMT). No. of bitstreams: 1 2006_Camilla de Andrade Gonçalves.pdf: 1648259 bytes, checksum: 4965bdd7c725fcd3f0af9b6d41eacd12 (MD5) Previous issue date: 2006-09-13
O objetivo deste trabalho é o estudo de critérios de resistência à fadiga multiaxial de metais em regime de alto número de ciclos. Os modelos apresentados por vários autores propõem, como medidas principais, a contribuição das tensões normais e das tensões cisalhantes para a degradação por fadiga do componente, além dos parâmetros do material. A questão que se coloca no contexto de solicitações multiaxiais é: qual é a melhor medida para caracterizar a amplitude de tensões cisalhantes e como incorporar o efeito das tensões normais? O estudo desenvolve então, uma análise destas questões relacionadas à modelagem de um critério de resistência à fadiga. Tensões normais trativas contribuem de forma maléfica para a degradação por fadiga por agirem no processo de abertura de microtrincas; quase a totalidade dos modelos de fadiga multiaxial considera a tensão hidrostática como medida das tensões normais atuantes na solicitação à fadiga. Sabe-se que esta é basicamente uma média das tensões normais e propõe-se aqui a substituição desta, pela máxima tensão principal. A aplicação da proposta a um conjunto grande de resultados experimentais disponíveis na literatura confirmou a hipótese de que a pior situação, que corresponde à existência de uma micro-trinca ortogonalmente orientada à máxima tensão principal, deve ser considerada e fornece uma previsão de resistência à fadiga mais conservativa e portanto, a favor da segurança. Quanto às tensões cisalhantes, primeiro apresentam-se as propostas de alguns autores, destacando-se dentre elas a abordagem do envelope elíptico e do envelope prismático. As duas aproximações fornecem as mesmas boas previsões de resistência à fadiga para dados experimentais de carregamentos senoidais com ciclos de mesma freqüência. Avança-se a análise para carregamentos mais gerais cujas trajetórias se distanciam da forma de um elipsóide e verifica-se de maneira inédita que, para uma ampla faixa de histórias de carregamento, as medidas de amplitude de tensões cisalhantes obtidas pelo máximo envelope prismático são equivalentes às medidas correspondentes obtidas pelo mínimo envelope elíptico. Tal verificação foi comprovada considerando-se trajetórias com ciclos senoidais assíncronos proporcionais e fora de fase, e ciclos não senoidais selecionadas a partir de resultados experimentais relativos a situações limites de resistência à fadiga. ________________________________________________________________________________________ ABSTRACT
The aim of this work is to evaluate multiaxial high cycle fatigue criteria for metals. The models presented by many authors propose that the the normal and shear stresses are the main variables controlling the fatigue damage, as well as the materials parameters. In the multiaxial context, the fundamental question to be answered is: which is the best measure to characterize the shear stress amplitude and how the well known effect of the mean normal stresses can be incorporated in the modeling process? This work carries out an analysis of such issues! Tensile stresses reduce the fatigue strength of metals as they keep the crack faces opened. Almost the totally of the multiaxial fatigue models available in the literature considers the hydrostatic stress as a measure for the normal stresses acting upon the fatigue solicitation. The hydrostatic stress is basically an average of the normal stresses acting in three orthogonal planes passing through a material point. Here we claim that the worst situation in terms of fatigue solicitation corresponds to the existence of a micro-crack orthogonally oriented to the maximum principal stress. Therefore, the maximum principal stress rather than the hydrostatic stress should be considered as an appropriate measure of the mean normal stress effect on the fatigue solicitation. To validate this hypothesis available experimental data published in the literature were selected and compared with the estimates provided by a modified version of the Prismatic Hull criterion developed by Mamiya and Araujo. Concerning the shear stresses, some models which consider the Minimum Circunscribing Ellipsoid or the Maximum Prismatic Hull of the deviatoric stress path as an appropriate measure for the shear stress amplitude are presented. The analysis carried out considering different materials subjected to a broad range of loading paths involving sinusoidal loadings with distinct frequencies and non-harmonic loadings revealed the shear stress amplitudes measured by the prismatic hull are equivalent to the ones measured by the elliptic hull.
Phillips, Peter Louis. "Integrated Multiaxial Experimentation and Constitutive Modeling." University of Dayton / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1492598070791388.
Повний текст джерелаHausding, Jan. "Entwicklung einer Verfestigungseinrichtung an einer Multiaxial-Nähwirkmaschine." Master's thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2006. http://nbn-resolving.de/urn:nbn:de:swb:14-1161074776507-67779.
Повний текст джерелаThe additional stabilization of open grid warp knits provides a better exploitation of the reinforcing yarns. To realize such an additional stabilization, various possible methods have been examined and assessed. Three different types of stabilization installations have been developed by combining the most promising technologies (infrared radiation, combination of heat and pressure, roll coater) and binding agents (thermoplastics, liquid agents). These installations offer special fea-tures for different needs: production, laboratory and least expense
Cherif, Chokri, Jan Hausding, Ulrike Berger, Ayham Younes, and Roland Kleicke. "Textile Betonbewehrungen auf Basis der Multiaxial-Kettenwirktechnik." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-77780.
Повний текст джерелаThis paper provides an overview on the results of textile concrete achieved in twelve years of research at the Institute of Textile Machinery and High Performance Material Technology (ITM) in the field of textile reinforcements for concrete based on the multiaxial stitch-bonding technology. During the early years the research focused on the development of the textile manufacturing process and the integration of additional functions in stitch-bonding machines. With the introduction of new fiber materials this was shifted towards the description of the material behavior of glass and carbon fibers under different load scenarios. Based on the results of this research, multiaxial multi-ply fabrics are available now as reinforcements for concrete, covering a broad range of applications. These fabrics can be produced with high quality and productivity and enable the practical usage of textile reinforced concrete
Lousberg, Henri Béatrice. "Chronic pain multiaxial assessment and behavioral mechanisms /." Maastricht : Maastricht : Universitaire Pers Maastricht ; University Library, Maastricht University [Host], 1994. http://arno.unimaas.nl/show.cgi?fid=6589.
Повний текст джерелаHallett, Joseph F. "Multiaxial strength and fatigue of rubber compounds." Thesis, Loughborough University, 1997. https://dspace.lboro.ac.uk/2134/6759.
Повний текст джерелаКниги з теми "Multiaxial"
Socie, Darrell. Multiaxial Fatigue. Warrendale, PA: SAE International, 1999. http://dx.doi.org/10.4271/r-234.
Повний текст джерелаMiller, KJ, and MW Brown, eds. Multiaxial Fatigue. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1985. http://dx.doi.org/10.1520/stp853-eb.
Повний текст джерелаInternational Conference on Biaxial/Multiaxial Fatigue (4th 1994 Saint-Germain en Laye, France). Multiaxial fatigue and design. London: Mechanical Engineering, 1996.
Знайти повний текст джерелаMcDowell, DL, and JR Ellis, eds. Advances in Multiaxial Fatigue. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1993. http://dx.doi.org/10.1520/stp1191-eb.
Повний текст джерела1956-, McDowell David L., and Ellis Rod 1939-, eds. Advances in multiaxial fatigue. Philadelphia, PA: ASTM, 1993.
Знайти повний текст джерела1947-, Brown M. W., and Miller K. J, eds. Biaxial and multiaxial fatigue. London: Mechanical Engineering, 1988.
Знайти повний текст джерелаEwald, Macha, Będkowski W, Łagoda T, and European Structural Integrity Society, eds. Multiaxial fatigue and fracture. Kidlington, Oxford: Elsevier, 1999.
Знайти повний текст джерелаJ, Miller K., Brown M. W. 1947-, ASTM Committee E-9 on Fatigue., and ASTM Committee E-24 on Fracture Testing., eds. Multiaxial fatigue: A symposium. Philadelphia, Pa: American Society for Testing and Materials, 1985.
Знайти повний текст джерелаInternational Conference on Biaxial/Multiaxial Fatigue (2nd 1985 University of Sheffield). Biaxial and multiaxial fatigue. London: Mechanical Engineering Publications, 1989.
Знайти повний текст джерелаGooch, D. J., and I. M. How, eds. Techniques for Multiaxial Creep Testing. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3415-3.
Повний текст джерелаЧастини книг з теми "Multiaxial"
Kurylo, Monica, and Edward Liebmann. "Multiaxial Assessment." In Encyclopedia of Clinical Neuropsychology, 2285–86. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-57111-9_2026.
Повний текст джерелаKurylo, Monica, and Trisha Hay. "Multiaxial Assessment." In Encyclopedia of Clinical Neuropsychology, 1671. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-0-387-79948-3_2026.
Повний текст джерелаKurylo, Monica, and Edward Liebmann. "Multiaxial Assessment." In Encyclopedia of Clinical Neuropsychology, 1–3. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56782-2_2026-2.
Повний текст джерелаBlétry, Marc, and Georges Cailletaud. "Multiaxial Fatigue." In Fatigue of Materials and Structures, 1–46. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118616994.ch1.
Повний текст джерелаMilella, Pietro Paolo. "Multiaxial Fatigue." In Fatigue and Corrosion in Metals, 477–520. Milano: Springer Milan, 2012. http://dx.doi.org/10.1007/978-88-470-2336-9_9.
Повний текст джерелаLexcellent, Christian. "Multiaxial PlasticityMultiaxial plasticity." In Linear and Non-linear Mechanical Behavior of Solid Materials, 91–116. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-55609-3_5.
Повний текст джерелаMunz, Dietrich, and Theo Fett. "Multiaxial Failure Criteria." In Ceramics, 167–202. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58407-7_10.
Повний текст джерелаCantwell, Dennis P., and Lorian Baker. "Multiaxial Diagnostic Approaches." In Diagnosis and Assessment in Autism, 111–22. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4899-0792-9_8.
Повний текст джерелаEllyin, Fernand. "Multiaxial experimental facilities." In Fatigue Damage, Crack Growth and Life Prediction, 179–204. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1509-1_5.
Повний текст джерелаBrown, M. W. "Multiaxial Fatigue Failure." In Advances in Fatigue Science and Technology, 339–61. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-2277-8_14.
Повний текст джерелаТези доповідей конференцій з теми "Multiaxial"
Camarena, Ernesto, Anthony G. Quintana, Victoria Yim, Peter W. Grimmer, John P. Mersch, Jeff Smith, John Emery, and Gustavo Castelluccio. "Multiaxial Loading of Threaded Fasteners." In AIAA Scitech 2019 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2019. http://dx.doi.org/10.2514/6.2019-2271.
Повний текст джерелаMousselmal, H. D., P. J. Cottinet, L. Quiquerez, B. Remaki, and L. Petit. "A multiaxial piezoelectric energy harvester." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Henry Sodano. SPIE, 2013. http://dx.doi.org/10.1117/12.2009621.
Повний текст джерелаMEZZICH, JUAN E., and MARIA ISABEL ZAPATA-VEGA. "MULTIAXIAL DIAGNOSIS OF SCHIZOPHRENIC PATIENTS." In IX World Congress of Psychiatry. WORLD SCIENTIFIC, 1994. http://dx.doi.org/10.1142/9789814440912_0095.
Повний текст джерелаWallner, Oswald, Josep M. Perdigues Armengol, and Anders L. Karlsson. "Multiaxial single-mode beam combiner." In SPIE Astronomical Telescopes + Instrumentation, edited by Wesley A. Traub. SPIE, 2004. http://dx.doi.org/10.1117/12.551072.
Повний текст джерелаJiang, Yanyao, Tianwen Zhao, Xiaogui Wang, and Zengliang Gao. "Multiaxial Fatigue of 16MnR Steel." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93473.
Повний текст джерелаZhang, Cheng-cheng, Yuan Ren, Jing-yun Gao, Ying Li, and Kun Yang. "Analysis of Multiaxial Fatigue Evaluation in Engine Components Using an Improved Multiaxial Fatigue Life Model." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-57128.
Повний текст джерелаConle, F. A. "Durability Analysis Under Complex Multiaxial Loading." In Passenger Car Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1987. http://dx.doi.org/10.4271/871969.
Повний текст джерелаWei, Haoyang, and Yongming Liu. "Energy-based multiaxial fatigue damage modelling." In 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2018. http://dx.doi.org/10.2514/6.2018-0646.
Повний текст джерелаKurath, Peter. "Multiaxial Fatigue Criteria for Spot Welds." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/920668.
Повний текст джерелаHay, N. C. "Conditioned Spectral Analysis in Multiaxial Fatigue." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1997. http://dx.doi.org/10.4271/970707.
Повний текст джерелаЗвіти організацій з теми "Multiaxial"
Le, Jialiang, Joseph Labuz, Takaaki Koyanagi, and Chen Hu. Probabilistic Failure Criterion of SiC/SiC Composites Under Multiaxial Loading. Office of Scientific and Technical Information (OSTI), March 2023. http://dx.doi.org/10.2172/1963092.
Повний текст джерелаBeaver, P. W. A Review of Multiaxial Fatigue and Fracture of Fibre-Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, January 1987. http://dx.doi.org/10.21236/ada191990.
Повний текст джерелаKyriakides, S. Response and Crushing of Cellular Solids Under Uniaxial and Multiaxial Loadings. Fort Belvoir, VA: Defense Technical Information Center, April 2004. http://dx.doi.org/10.21236/ada423997.
Повний текст джерелаLu, Wei-Yang. Small-Scale Multiaxial Deformation Experiments on Solder for High-Fidelity Model Development. Office of Scientific and Technical Information (OSTI), December 2002. http://dx.doi.org/10.2172/811190.
Повний текст джерелаRuggles, M. B., G. T. Yahr, and R. L. Battiste. Static properties and multiaxial strength criterion for design of composite automotive structures. Office of Scientific and Technical Information (OSTI), November 1998. http://dx.doi.org/10.2172/290934.
Повний текст джерелаKhan, Akhtar S. Dynamic and Quasi-Static Multiaxial Response of Ceramics and Constitutive/Damage Modeling. Fort Belvoir, VA: Defense Technical Information Center, January 2001. http://dx.doi.org/10.21236/ada391958.
Повний текст джерелаPeterson, P. D., D. J. Idar, R. Rabie, C. S. Fugard, W. King, G. A. Buntain, and N. B. Crane. Quasi-static multiaxial testing of PBX 9501: Creep effects on Estane molecular weight. Office of Scientific and Technical Information (OSTI), February 1999. http://dx.doi.org/10.2172/334296.
Повний текст джерелаRiveros, Guillermo, Hussam Mahmoud, and Santiago Lopez. Multiaxial fatigue strength of structural bolts under combined cyclic axial and shear demands. Engineer Research and Development Center (U.S.), July 2019. http://dx.doi.org/10.21079/11681/33270.
Повний текст джерелаDing, J. L., K. C. Liu, and C. R. Brinkman. Multiaxial deformation and life prediction model and experimental data for advanced silicon nitride ceramics. Office of Scientific and Technical Information (OSTI), June 1993. http://dx.doi.org/10.2172/10162954.
Повний текст джерелаKaneshige, Michael J., Md Fazle Rabbi, Michael J. Kaneshige, Robert Mach, Carlos A. Catzin, and Calvin M. Stewart. Novel Method to Characterize and Model the Multiaxial Constitutive and Damage Response of Energetic Materials. Office of Scientific and Technical Information (OSTI), December 2017. http://dx.doi.org/10.2172/1415222.
Повний текст джерела