Добірка наукової літератури з теми "Models and simulations of design"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Models and simulations of design".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Models and simulations of design"
Wortmann, Thomas, Alberto Costa, Giacomo Nannicini, and Thomas Schroepfer. "Advantages of surrogate models for architectural design optimization." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 29, no. 4 (October 7, 2015): 471–81. http://dx.doi.org/10.1017/s0890060415000451.
Повний текст джерелаSzufel, Przemysław, Bogumił Kamiński, and Piotr Wojewnik. "Controllling Simulation Experiment Design for Agent-Based Models Using Tree Representation of Parameter Space." Foundations of Computing and Decision Sciences 38, no. 4 (December 1, 2013): 277–98. http://dx.doi.org/10.2478/fcds-2013-0014.
Повний текст джерелаRugenstein, Maria, Jonah Bloch-Johnson, Ayako Abe-Ouchi, Timothy Andrews, Urs Beyerle, Long Cao, Tarun Chadha, et al. "LongRunMIP: Motivation and Design for a Large Collection of Millennial-Length AOGCM Simulations." Bulletin of the American Meteorological Society 100, no. 12 (December 1, 2019): 2551–70. http://dx.doi.org/10.1175/bams-d-19-0068.1.
Повний текст джерелаBERNASCHI, MASSIMO, and FILIPPO CASTIGLIONE. "COMPUTATIONAL FEATURES OF AGENT-BASED MODELS." International Journal of Computational Methods 02, no. 01 (March 2005): 33–48. http://dx.doi.org/10.1142/s0219876205000399.
Повний текст джерелаSurendranath, H., and M. Dunbar. "Parallel Computing for Tire Simulations." Tire Science and Technology 39, no. 3 (September 1, 2011): 193–209. http://dx.doi.org/10.2346/1.3637743.
Повний текст джерелаBrown, Alan S. "Role Models." Mechanical Engineering 121, no. 07 (July 1, 1999): 44–49. http://dx.doi.org/10.1115/1.1999-jul-1.
Повний текст джерелаKustron, Kamila, Vaclav Horak, Radek Doubrava, and Zdobyslaw Jan Goraj. "New hail impact simulation models on composite laminated wing leading edge." Aircraft Engineering and Aerospace Technology 91, no. 3 (March 4, 2019): 457–65. http://dx.doi.org/10.1108/aeat-02-2018-0089.
Повний текст джерелаKhan, M. Ashraf, Jason M. Kulick, David Kopp, Patrick Fay, Alfred M. Kriman, and Gary H. Bernstein. "Design and Robustness of Quilt Packaging Superconnect." Journal of Microelectronics and Electronic Packaging 10, no. 1 (January 1, 2013): 8–14. http://dx.doi.org/10.4071/imaps.358.
Повний текст джерелаKhan, M. Ashraf, Jason M. Kulick, Alfred M. Kriman, and Gary H. Bernstein. "Design and Robustness of Quilt Packaging Superconnect." International Symposium on Microelectronics 2012, no. 1 (January 1, 2012): 000524–30. http://dx.doi.org/10.4071/isom-2012-poster_khan.
Повний текст джерелаKhadke, Aniruddha, Somnath Ghosh, and Ming Li. "Numerical Simulations and Design of Shearing Process for Aluminum Alloys." Journal of Manufacturing Science and Engineering 127, no. 3 (July 21, 2004): 612–21. http://dx.doi.org/10.1115/1.1951787.
Повний текст джерелаДисертації з теми "Models and simulations of design"
Pohl, Thomas. "Design of adaptable simulation models." Thesis, Sheffield Hallam University, 2006. http://shura.shu.ac.uk/20240/.
Повний текст джерелаOchs, David S. "Design of detailed models for use in fast aeroelastic simulations of permanent-magnet direct-drive wind turbines." Thesis, Kansas State University, 2012. http://hdl.handle.net/2097/15042.
Повний текст джерелаDepartment of Electrical and Computer Engineering
Ruth Douglas Miller
This thesis presents the design of two models for permanent-magnet direct-drive wind turbines. The models are of a 10 kW and a 5 MW wind turbine, which are representative of residential scale and commercial scale turbines respectively. The models include aerodynamic and mechanical simulations through the FAST software, as well as concurrent electrical simulations through the SimPowerSystems toolbox for MATLAB/Simulink. The aim is to provide wind turbine designers and researchers with a comprehensive simulation tool that they can use to design and test many different aspects of a wind turbine. The particular novelty of these models is their high level of detail in electromechanical simulations. For each model, a generator speed controller was designed in a reference frame attached to the generator’s rotor, and was executed with a 3-phase active rectifier using space-vector pulse-width modulation. Also for each model, active and reactive power controllers were designed in a reference frame synchronous with the grid, and were executed with a 3-phase inverter using space-vector pulse-width modulation. Additionally, a blade pitch controller was designed for the 5 MW model. Validation of the models was carried out in the MATLAB/Simulink environment with satisfactory results.
Craig, David Latch. "Perceptual simulation and analogical reasoning in design." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/23940.
Повний текст джерелаLi, Zhiyong. "Data-Driven Adaptive Reynolds-Averaged Navier-Stokes k - ω Models for Turbulent Flow-Field Simulations". UKnowledge, 2017. http://uknowledge.uky.edu/me_etds/93.
Повний текст джерелаKini, Satish D. "An approach to integrating numerical and response surface models for robust design of production systems." Columbus, Ohio : Ohio State University, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1080276457.
Повний текст джерелаTitle from first page of PDF file. Document formatted into pages; contains xviii, 220 p.; also includes graphics (some col.). Includes abstract and vita. Advisor: R. Shivpuri, Dept. of Industrial, Welding and Systems Engineering. Includes bibliographical references.
Han, Sangmok. "A design tool for reusing integration knowledge in simulation models." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/85771.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 88-89).
In the academic field of computer-aided product development, the role of the design tool is to support engineering designers to develop and integrate simulation models. Used to save time and costs in product development process, the simulation model, however, introduces additional costs for its development and integration, which often become considerably large due to the fact that many, complex simulation models need to be integrated. Moreover, the result of integration and the effort taken during the integration process are often not reused for other product development projects. In this paper, we attempt to develop a design tool that can capture integration knowledge and make the knowledge reusable for other design tasks. More specifically, we are interested in the two kinds of integration knowledge: the first captured in the form of a graph structure associating simulation models, called the integration structure, and the second generalized from script codes into rule-based patterns, called the integration code pattern. An integration mechanism and a pattern generalization algorithm have been developed and incorporated into a design tool utilizing a new integration model called catalog model, a model that enables us to reuse the integration structure and code patterns of one model to quickly build another. Application scenarios have demonstrated the effectiveness of the design tool: The same integration task could be performed in less time, and repetitive and error-prone elements in the task were substantially reduced as a result of reusing integration knowledge in the simulation models.
by Sangmok Han.
S.M.
Yasar, Orten Pinar. "Numerical Analysis, Design And Two Port Equivalent Circuit Models For Split Ring Resonator Arrays." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611620/index.pdf.
Повний текст джерелаs HFSS software that is based on the finite elements method (FEM). Some of these structures are constructed over low-loss dielectric substrates and their complex scattering parameters are measured to verify the numerical simulation results. The major purpose of this study has been to establish equivalent circuit models to estimate the behavior of SRR structures in a simple and computationally efficient manner. For this purpose, individual single ring SRR cells with multiple splits are modeled by appropriate two-port RLC resonant circuits paying special attention to conductor and dielectric loss effects. Results obtained from these models are compared with the results of HFSS simulations which use either PEC/PMC (perfect electric conductor/perfect magnetic conductor) type or perfectly matched layer (PML) type boundary conditions. Interactions between the elements of SRR arrays such as the mutual inductance and capacitance effects as well as additional dielectric losses are also modeled by proper two-port equivalent circuits to describe the overall array behavior and to compute the associated transmission spectrum by simple MATLAB codes. Results of numerical HFSS simulations, equivalent circuit model computations and measurements are shown to be in good agreement.
Muthukrishnan, Gayathri. "Utilizing Hierarchical Clusters in the Design of Effective and Efficient Parallel Simulations of 2-D and 3-D Ising Spin Models." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/9944.
Повний текст джерелаMaster of Science
Zhang, Bo. "Design, modelling and simulation of a novel micro-electro-mechanical gyroscope with optical readouts." Thesis, Cape Peninsula University of Technology, 2007. http://hdl.handle.net/20.500.11838/1101.
Повний текст джерелаMicro Electro-Machnical Systems (MEMS) applications are fastest development technology present. MEMS processes leverage mainstream IC technologies to achieve on chip sensor interface and signal processing circuitry, multi-vendor accessibility, short design cycles, more on-chip functions and low cost. MEMS fabrications are based on thin-film surface microstructures, bulk micromaching, and LIGA processes. This thesis centered on developing optical micromaching inertial sensors based on MEMS fabrication technology which incorporates bulk Si into microstructures. Micromachined inertial sensors, consisting of the accelerometers and gyroscopes, are one of the most important types of silicon-based sensors. Microaccelerometers alone have the second largest sales volume after pressure sensors, and it is believed that gyroscopes will soon be mass produced at the similar volumes occupied by traditional gyroscopes. A traditional gyroscope is a device for measuring or maintaining orientation, based on the principle of conservation of angular momentum. The essence of the gyroscope machine is a spinning wheel on an axle. The device, once spinning, tends to resist changes to its orientation due to the angular momentum of the wheel. In physics this phenomenon is also known as gyroscopic inertia or rigidity in space. The applications are limited by the huge volume. MEMS Gyroscopes, which are using the MEMS fabrication technology to minimize the size of gyroscope systems, are of great importance in commercial, medical, automotive and military fields. They can be used in cars for ASS systems, for anti-roll devices and for navigation in tall buildings areas where the GPS system might fail. They can also be used for the navigation of robots in tunnels or pipings, for leading capsules containing medicines or diagnostic equipment in the human body, or as 3-D computer mice. The MEMS gyroscope chips are limited by high precision measurement because of the unprecision electrical readout system. The market is in need for highly accurate, high-G-sustainable inertial measuring units (IMU's). The approach optical sensors have been around for a while now and because of the performance, the mall volume, the simplicity has been popular. However the production cost of optical applications is not satisfaction with consumer. Therefore, the MEMS fabrication technology makes the possibility for the low cost and micro optical devices like light sources, the waveguide, the high thin fiber optical, the micro photodetector, and vary demodulation measurement methods. Optic sensors may be defined as a means through which a measurand interacts with light guided in an optical fiber (an intrinsic sensor) or guided to (and returned from) an interaction region (an extrinsic sensor) by an optical fiber to produce an optical signal related to the parameter of interest. During its over 30 years of history, fiber optic sensor technology has been successfully applied by laboratories and industries worldwide in the detection of a large number of mechanical, thermal, electromagnetic, radiation, chemical, motion, flow and turbulence of fluids, and biomedical parameters. The fiber optic sensors provided advantages over conventional electronic sensors, of survivability in harsh environments, immunity to Electro Magnetic Interference (EMI), light weight, small size, compatibility with optical fiber communication systems, high sensitivity for many measurands, and good potential of multiplexing. In general, the transducers used in these fiber optic sensor systems are either an intensity-modulator or a phase-modulator. The optical interferometers, such as Mach-Zehnder, Michelson, Sagnac and Fabry-Perot interferometers, have become widely accepted as a phase modulator in optical sensors for the ultimate sensitivity to a range of weak signals. According to the light source being used, the interferometric sensors can be simply classified as either a coherence interferometric sensor if a the interferometer is interrogated by a coherent light source, such as a laser or a monochromatic light, or a lowcoherence interferometric sensor when a broadband source a light emitting diode (LED) or a superluminescent diode (SLD), is used. This thesis proposed a novel micro electro-mechanical gyroscope system with optical interferometer readout system and fabricated by MEMS technology, which is an original contribution in design and research on micro opto-electro-mechanical gyroscope systems (MOEMS) to provide the better performances than the current MEMS gyroscope. Fiber optical interferometric sensors have been proved more sensitive, precision than other electrical counterparts at the measurement micro distance. The MOMES gyroscope system design is based on the existing successful MEMS vibratory gyroscope and micro fiber optical interferometer distances sensor, which avoid large size, heavy weight and complex fabrication processes comparing with fiber optical gyroscope using Sagnac effect. The research starts from the fiber optical gyroscope based on Sagnac effect and existing MEMS gyroscopes, then moving to the novel design about MOEMS gyroscope system to discuss the operation principles and the structures. In this thesis, the operation principles, mathematics models and performances simulation of the MOEMS gyroscope are introduced, and the suitable MEMS fabrication processes will be discussed and presented. The first prototype model will be sent and fabricated by the manufacture for the further real time performance testing. There are a lot of inventions, further research and optimize around this novel MOEMS gyroscope chip. In future studying, the research will be putted on integration three axis Gyroscopes in one micro structure by optical sensor multiplexing principles, and the new optical devices like more powerful light source, photosensitive materials etc., and new demodulation processes, which can improve the performance and the interface to co-operate with other inertial sensors and navigation system.
Wiedemann, Michael. "Robust parameter design for agent-based simulation models with application in a cultural geography model." Thesis, Monterey, California : Naval Postgraduate School, 2010. http://edocs.nps.edu/npspubs/scholarly/theses/2010/Jun/10Jun%5FWiedemann.pdf.
Повний текст джерелаThesis Advisor(s): Johnson, Rachel T. ; Second Reader: Baez, Francisco R, "June 2010." Description based on title screen as viewed on July 15, 2010. Author(s) subject terms: Cultural Geography, Agent-Based Model (ABM), Irregular Warfare (IW), Theory of planned Behavior (TpB), Baysian Belief Nets (BBN), Counterinsurgency Operations (COIN), Stability Operations, Discrete Event Simulation (DES), Design of Experiments (DOX), Robust Parameter Design (RPD). Includes bibliographical references (p. 69-70). Also available in print.
Книги з теми "Models and simulations of design"
Physiologically based pharmacokinetic (PBPK) modeling and simulations: Principles, methods, and applications in the pharmaceutical industry. Hoboken, N.J: Wiley, 2011.
Знайти повний текст джерелаMarin, Guy B. Multiscale simulation and design. Amsterdam: Elsevier/Academic Press, 2011.
Знайти повний текст джерелаYucesan, Enver. "Simulation graphs for design and analysis of discrete event simulation models". Fontainbleau: INSEAD, 1986.
Знайти повний текст джерелаservice), SpringerLink (Online, ed. Virtual Reality and Animation for MATLAB® and Simulink® Users: Visualization of Dynamic Models and Control Simulations. London: Springer London, 2012.
Знайти повний текст джерелаJohan, Marklund, ed. Business process modeling, simulation, and design. Boca Raton: Taylor & Francis, 2013.
Знайти повний текст джерелаJohan, Marklund, ed. Business process modeling, simulation, and design. Upper Saddle River, NJ: Pearson/Prentice Hall, 2004.
Знайти повний текст джерелаHF filter design and computer simulation. New York: McGraw-Hill, 1995.
Знайти повний текст джерелаPorter, Tom. Architectural supermodels: Physical design simulation. Boston, MA: Architectural Press, 2000.
Знайти повний текст джерела1944-, Truhlar Donald G., ed. Rational drug design. New York: Springer, 1999.
Знайти повний текст джерелаMather A. R. Sadiq Al-Baghdadi. CFD models for analysis and design of PEM fuel cells CFD models for analysis & design of PEM fuel cells. New York: Nova Science Publishers, 2008.
Знайти повний текст джерелаЧастини книг з теми "Models and simulations of design"
G. Keller, Bettina, Stevan Aleksić, and Luca Donati. "Markov State Models in Drug Design." In Biomolecular Simulations in Structure-Based Drug Discovery, 67–86. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527806836.ch4.
Повний текст джерелаDetomi, Davide, Nicola Parolini, and Alfio Quarteroni. "Numerical Models and Simulations in Sailing Yacht Design." In Lecture Notes in Computational Science and Engineering, 1–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-04466-3_1.
Повний текст джерелаStobrawa, Sebastian, Gina Vibora Münch, Berend Denkena, and Marc-André Dittrich. "Design of Simulation Models." In Springer Series in Advanced Manufacturing, 181–204. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77539-1_9.
Повний текст джерелаPieber, Thomas Wolfgang, Thomas Ulz, and Christian Steger. "Model-Based Design of Secured Power Aware Smart Sensors." In Sensor Systems Simulations, 227–51. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16577-2_8.
Повний текст джерелаHerssand, Saïna, Eric Landel, Jean-Marc Gilles, and Joe Matta. "Model Identity Card (MIC) for Simulation Models." In Complex Systems Design & Management, 317. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-26109-6_38.
Повний текст джерелаSyrjakow, Elisabeth, and Michael Syrjakow. "Parameter Optimization of Complex Simulation Models." In System Design Automation, 233–46. Boston, MA: Springer US, 2001. http://dx.doi.org/10.1007/978-1-4757-6666-0_20.
Повний текст джерелаHasan, S., J. Prince, and A. Cangellaris. "Comparisons of RL and RLC Interconnect Models in the Simultaneous Switching Noise Simulations." In Interconnects in VLSI Design, 79–88. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-4349-7_7.
Повний текст джерелаHan, Xu, and Jie Liu. "Interval Optimization Design Based on Surrogate Models." In Numerical Simulation-based Design, 243–58. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-10-3090-1_13.
Повний текст джерелаHan, Xu, and Jie Liu. "Rapid Structural Analysis Based on Surrogate Models." In Numerical Simulation-based Design, 97–123. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-10-3090-1_6.
Повний текст джерелаHo, Jeffrey C. F., Daniel A. Muñoz, and Jing Ding. "Design to Divide Attention: An Exploration of Designing Virtual Reality Simulations of Accidents." In [ ] With Design: Reinventing Design Modes, 357–64. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4472-7_24.
Повний текст джерелаТези доповідей конференцій з теми "Models and simulations of design"
Sands, Benjamin, Debra Stephens, Thomas J. Laliberty, and Naresh Raja. "Manufacturing Simulations Based on Integrated Product/Process Models." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/dfm-4355.
Повний текст джерелаHajimiri, Maryam, and Jose E. Schutt-Aine. "MOS models for LIM transient simulations." In 2016 IEEE Electrical Design of Advanced Packaging and Systems (EDAPS). IEEE, 2016. http://dx.doi.org/10.1109/edaps.2016.7874438.
Повний текст джерелаRückwald, Tobias, Alexander Held, and Robert Seifried. "Reduced Isogeometric Analysis Models for Impact Simulations." In ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/detc2021-67417.
Повний текст джерелаNadali Najafabadi, Hossein, Andreas Bradley, Joakim Wren, Matts Karlsson, Esa Utriainen, and Mats Kinell. "CFD Simulations Using Reduced Models for Film Cooling Design." In 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-710.
Повний текст джерелаRosing, Richard, C. Wang, R. W. Tucker, Andrew Richardson, and B. De Masi. "Generation of MEMS component models using Cosserat symbolic simulations." In Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS 2002, edited by Bernard Courtois, Jean Michel Karam, Karen W. Markus, Bernd Michel, Tamal Mukherjee, and James A. Walker. SPIE, 2002. http://dx.doi.org/10.1117/12.462805.
Повний текст джерелаQian, Zhiguang, Carolyn Conner Seepersad, V. Roshan Joseph, C. F. Jeff Wu, and Janet K. Allen. "Building Surrogate Models Based on Detailed and Approximate Simulations." In ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/detc2004-57486.
Повний текст джерелаDuchêne, Laurent. "Deep Drawing Simulations With Different Polycrystalline Models." In MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications - NUMIFORM 2004 - Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. AIP, 2004. http://dx.doi.org/10.1063/1.1766662.
Повний текст джерелаTourek, Bethany, Dan Orban, Lingyu Meng, Hakizumwami Birali Runesha, Dan Keefe, and Arthur Erdman. "Review of Cardiac Pacemaker Lead Designs for Computational Models in a VR Environment." In 2017 Design of Medical Devices Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/dmd2017-3473.
Повний текст джерелаWang, Zequn, Yan Fu, Ren-Jye Yang, Saeed Barbat, and Wei Chen. "Model Validation of Dynamic Engineering Models Under Uncertainty." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59437.
Повний текст джерелаAsenov, Plamen, David New, Dave Reid, Campbell Millar, Scott Roy, and Asen Asenov. "Evaluating the accuracy of SRAM margin simulation through large scale Monte-Carlo simulations with accurate compact models." In 2013 International Conference on IC Design & Technology (ICICDT). IEEE, 2013. http://dx.doi.org/10.1109/icicdt.2013.6563296.
Повний текст джерелаЗвіти організацій з теми "Models and simulations of design"
Siebke, Christian, Maximilian Bäumler, Madlen Ringhand, Marcus Mai, Felix Elrod, and Günther Prokop. Report on design of modules for the stochastic traffic simulation. Technische Universität Dresden, 2021. http://dx.doi.org/10.26128/2021.245.
Повний текст джерелаPullammanappallil, Pratap, Haim Kalman, and Jennifer Curtis. Investigation of particulate flow behavior in a continuous, high solids, leach-bed biogasification system. United States Department of Agriculture, January 2015. http://dx.doi.org/10.32747/2015.7600038.bard.
Повний текст джерелаAllen, Luke, Robert Haehnel, and Yonghu Wenren. South Pole Station snowdrift model. Engineer Research and Development Center (U.S.), August 2022. http://dx.doi.org/10.21079/11681/44943.
Повний текст джерелаFurbo, Simon, Weiqiang Kong, and Jianhua Fan. Simulation and design of collector array units within large systems. IEA SHC Task 55, October 2019. http://dx.doi.org/10.18777/ieashc-task55-2019-0003.
Повний текст джерелаPetrie, John, Yan Qi, Mark Cornwell, Md Al Adib Sarker, Pranesh Biswas, Sen Du, and Xianming Shi. Design of Living Barriers to Reduce the Impacts of Snowdrifts on Illinois Freeways. Illinois Center for Transportation, November 2020. http://dx.doi.org/10.36501/0197-9191/20-019.
Повний текст джерелаErvin, Kelly, Karl Smink, Bryan Vu, and Jonathan Boone. Ship Simulator of the Future in virtual reality. Engineer Research and Development Center (U.S.), September 2022. http://dx.doi.org/10.21079/11681/45502.
Повний текст джерелаApostolatos, A., R. Rossi, and C. Soriano. D7.2 Finalization of "deterministic" verification and validation tests. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.006.
Повний текст джерелаChen, Xin, Yanfeng Ouyang, Ebrahim Arian, Haolin Yang, and Xingyu Ba. Modeling and Testing Autonomous and Shared Multimodal Mobility Services for Low-Density Rural Areas. Illinois Center for Transportation, August 2022. http://dx.doi.org/10.36501/0197-9191/22-013.
Повний текст джерелаAursjø, Olav, Aksel Hiorth, Alexey Khrulenko, and Oddbjørn Mathias Nødland. Polymer flooding: Simulation Upscaling Workflow. University of Stavanger, November 2021. http://dx.doi.org/10.31265/usps.203.
Повний текст джерелаKasputis, Stephen, Ivar Oswalt, Ryan McKay, and Suzanne Barber. Semantic Descriptors of Models and Simulations. Fort Belvoir, VA: Defense Technical Information Center, January 2006. http://dx.doi.org/10.21236/ada444441.
Повний текст джерела