Готові списки джерел за темами / Mode engineering

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Mode engineering"

Автор: Grafiati

Опубліковано: 10 березня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Mode engineering".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Mode engineering"

Shevtsov, V. "Russian engineering in turnkey mode." Nanoindustry Russia, no. 1 (2016): 30–32. http://dx.doi.org/10.22184/1993-8578.2016.63.1.30.32.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Xu, J. X. "Sliding mode control in engineering." Automatica 39, no. 5 (May 2003): 951–54. http://dx.doi.org/10.1016/s0005-1098(03)00004-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yong, LUO. "Exploration and Practice of “Embedded System” Engineering Teaching Mode Based on CDIO Engineering Education Mode." International Education Studies 13, no. 6 (May 29, 2020): 146. http://dx.doi.org/10.5539/ies.v13n6p146.

Повний текст джерела

Анотація:

Embedded system is an interdisciplinary, profound foundation and practice-oriented course; at present, in the traditional teaching mode, embedded systems in colleges and universities generally have problems such as disconnected theory and practice, outdated assessment methods, and low enthusiasm of students. Arming to cultivate compound embedded development talents that meet the needs of enterprises, based on CDIO engineering education mode, this paper analyzes the characteristics of the “Embedded System” course, and takes engineering project development practice as the dominant idea to discuss the course system, teaching material construction and teaching method reform of “Embedded System.” By designing a complete project teaching system, closely combines the theoretical teaching and practice of the course. Multiple rounds of teaching practices show that through the project-driven teaching method, students’ engineering practice ability can be significantly improved, so that students can deeply master the basic principles of embedded systems, and possess the engineering development ability of embedded products at the same time, thus meeting the needs of enterprises for innovative and interdisciplinary talents.

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Jin Song. "Study on Innovative Engineering of Energy Industry." Applied Mechanics and Materials 484-485 (January 2014): 593–98. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.593.

Повний текст джерела

Анотація:

At the beginning ,this paper analyses the current situation on chinas energy enterprises going out ;Then this article generalize the going out modes into three kinds, that is the protocol mode on exploit and services, the mode of mergers and acquisitions and the mode of resource bidding. By using TOWS Matrix method, this paper analyses these modes respectively. Finally, this article put forward the path to choose the better mode for Chinas energy enterprises.

Стилі APA, Harvard, Vancouver, ISO та ін.

Yang, Ankun, Alexander J. Hryn, Marc R. Bourgeois, Won-Kyu Lee, Jingtian Hu, George C. Schatz, and Teri W. Odom. "Programmable and reversible plasmon mode engineering." Proceedings of the National Academy of Sciences 113, no. 50 (November 28, 2016): 14201–6. http://dx.doi.org/10.1073/pnas.1615281113.

Повний текст джерела

Анотація:

Plasmonic nanostructures with enhanced localized optical fields as well as narrow linewidths have driven advances in numerous applications. However, the active engineering of ultranarrow resonances across the visible regime—and within a single system—has not yet been demonstrated. This paper describes how aluminum nanoparticle arrays embedded in an elastomeric slab may exhibit high-quality resonances with linewidths as narrow as 3 nm at wavelengths not accessible by conventional plasmonic materials. We exploited stretching to improve and tune simultaneously the optical response of as-fabricated nanoparticle arrays by shifting the diffraction mode relative to single-particle dipolar or quadrupolar resonances. This dynamic modulation of particle–particle spacing enabled either dipolar or quadrupolar lattice modes to be selectively accessed and individually optimized. Programmable plasmon modes offer a robust way to achieve real-time tunable materials for plasmon-enhanced molecular sensing and plasmonic nanolasers and opens new possibilities for integrating with flexible electronics.

Стилі APA, Harvard, Vancouver, ISO та ін.

Sanches, Suely da Penha, and Fabiana Serra de Arruda. "Incorporating Nonmotorized Modes in a Mode Choice Model." Transportation Research Record: Journal of the Transportation Research Board 1818, no. 1 (January 2002): 89–93. http://dx.doi.org/10.3141/1818-14.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kamat, S. V., and J. P. Hirth. "Mixed Mode Fracture Toughness of Engineering Materials." Journal of Engineering Materials and Technology 117, no. 4 (October 1, 1995): 391–94. http://dx.doi.org/10.1115/1.2804731.

Повний текст джерела

Анотація:

The effect of mixed mode loading on the fracture toughness of engineering materials is rationalized in terms of the operative fracture mechanism as well as the deformation field ahead of the crack tip. It was found that mixed mode fracture is of utmost importance in materials which fail by stable ductile fracture caused by second phase particles, since in such materials there is a significant reduction in fracture toughness on mixed-mode loading. An autocatalytic shear localization-void formation mechanistic model was found to qualitatively explain the mixed mode fracture behavior in such materials.

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Wen Hui. "Research on Training Mode of Higher Engineering Education." Advanced Materials Research 591-593 (November 2012): 2302–5. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.2302.

Повний текст джерела

Анотація:

Based on the current of higher engineering education, analyzing the barriers of the development, pointing out the deficiencies of China's higher engineering education in the training mode, afterwards, concluding the higher engineering education reform is imperative. In order to solve the existing problems and response training requirements in higher engineering education, learning from the experience of overseas development, particularly American mode and German mode as example. “a body with two wings” new training model is proposed. Moreover, it can solve the contradiction effectively. The mode can be applied to and will bring practical guiding significance for the development of higher engineering education. It can provide some reference value for higher engineering education reform meanwhile.

Стилі APA, Harvard, Vancouver, ISO та ін.

Wen, Wen, and Wang Fang. "Research on the Practical Teaching System based on the Workshop Model under the Background of New Engineering." Advances in Higher Education 3, no. 2 (October 10, 2019): 144. http://dx.doi.org/10.18686/ahe.v3i2.1433.

Повний текст джерела

Анотація:

<p>In recent years, the practical teaching mode based on the new engineering background has become more diversified, among which the workshop mode is more widely used than other modes. This paper deeply analyzes the development of practical teaching realized by using the workshop model in the new engineering background, and highlights the advantages of choosing the workshop as the practical teaching model.</p>

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, Yeong Huei, Kerri Bland, Wai Wah Low, and Shi Yee Wong. "Civil Engineering Student Performance Observation During COVID-19 Pandemic Period." Asean Journal of Engineering Education 6, no. 1 (June 30, 2022): 51–57. http://dx.doi.org/10.11113/ajee2022.6n1.83.

Повний текст джерела

Анотація:

The coronavirus disease 2019 (COVID-19) pandemic shifted the learning method from conventional face-to-face to online. Such abrupt changes provide insufficient time for students to adapt and hence affect their academic performance. Situation seems to be critical towards engineering education, as it at most applicable to blended learning mode, with limited application of fully online mode. The objectives of this study are to compare students’ academic performance with different delivery methods and identify potential learning-related issues in civil engineering material subject during the COVID-19 pandemic period. Three batches of students in the academic year of 2019, 2020 and 2021, are the targeted population, with the delivery modes of conventional face-to-face mode, mixed mode and fully online mode respectively. All three batches of students were undergoing similar assessments of a fundamental subject, Civil Engineering Materials, in Curtin University Malaysia. The findings revealed that students with fully online mode were not performing well in their assessments, notably final examination. There seems to have a lack of peer assistance and non-adaptability in the online mode. Recommendations such as effective online model and collaborative activities have been included to cope for studies during the pandemic. As it is unpredictable for the evolvement of COVID-19 pandemic, this study suggests future research to look into ways of strengthening online teaching tools in engineering degree programmes.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Mode engineering"

Pennas, Dimitrios Christou. "Mode III Fracture in Advanced Engineering Materials." Thesis, University of Liverpool, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.486939.

Повний текст джерела

Анотація:

Delamination is a fundamental failure mode of laminated composites. When laminates are subjected to out-of-plane loading, the resin matrices between the plies often fail, resulting in ply separation or delamination failure. Such loading conditions occur in various ways and depend heavily on the load transfer mo~es in the composite structures. Delamination cracks can be visualised in the fracture mechanics sense to grow, and thus can be characterised in Mode I (opening), Mode II (shear) and Mode III (scissoring or anti-plane shear) and their combinations. __The test techniques for delamination in Mode I and Mode II, as well as mixed Mode IIII, have been well established. However, few workers have investigated the Mode III interlaminar fracture properties of composites, partly because of the experimental difficulties associated with the introduction of pure Mode III loading to the delamination crack. The aim of this study was to investigate the Mode III interlaminar fracture properties of composite materials based on both thermoplastic and thermosetting matrices, adhesive joints and bi-material samples. For this reason, both numerical and experimental methods were used. The Edge Crack Torsion (ECT) test geometry was employed in order to evaluate the Mode III response of the samples studied, as it is commonly accepted that this is the most effective technique for cllaracterising this mode of delamination. The Virtual Crack Closure Integral has also been extensively used to characterise the loading conditions at the crack tip in these samples. Once the quasi-static response of the composites were analysed, dynamic tests were undertaken to investigate the rate-sensitive behaviour of these high-performance materials. Finally, the Mode III geometry was modified to look at possible mixed-mode failure involving Mode II contributions.

Стилі APA, Harvard, Vancouver, ISO та ін.

Liljestrand, Charlotte. "Spatial mode engineering in mid-infrared optical parametric oscillators." Thesis, KTH, Laserfysik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-42705.

Повний текст джерела

Анотація:

The purpose of this thesis was to investigate the possibilities of enhancing the temporal and spatial coherence of parametric devices in the mid-infrared spectrum by exploiting inherent coherence selection of Bessel beams. Several optical parametric oscillators (OPO) were constructed and characterized for various types of resonators and pump lasers. In the first part of this work an OPO was constructed out of a periodically poled KTP (PPKTP) crystal within a stable resonator. It was pumped by a Q-switched Nd:YAG laser in transversal and longitudinal single mode operation. The OPO was pumped at 1064 nm and operated at signal wavelength of 1595.9 nm with a bandwidth at FWHM of 0.2 nm and idler wavelength 3192.9 nm and bandwidth of 0.5nm at FWHM. The stable resonator was constructed out of a curved input coupler and a planar output coupler to generate a spatially coherent beam. The beam quality factor of the OPO was measured to M2=1.3 and M2=1.7 in the horizontal and the vertical direction respectively. In the second part of this work conical beams, and hence noncollinear phase matching, was used. This was done to improve and study the temporal and spatial coherence of the generated beam if the OPO is pumped by a laser operating in multiple transversal and longitudinal modes. Using noncollinear phase matching provides a possibility of generating a highly coherent signal (or idler) wave when using a pump laser which operates in multiple transversal and longitudinal modes. Usually, such pump laser makes it difficult to generate highly coherent beams since the properties, such as bandwidth and beam quality factor, of the pump laser are transferred to the generated waves. So called multimode lasers, which operate in multiple modes, can be considered inexpensive and reliable while providing high pulse energies, and they are therefore attractive as pump sources for nonlinear processes. Throughout this second part a Q-switched Nd:YAG laser operating in multiple transversal and longitudinal modes at a wavelength 1064 nm was used. Optical parametric generation (OPG) was used to compare the effects between pumping with a Gaussian wave, and collinear phase matching, and pumping with a conical, a Bessel beam and hence noncollinear phase matching. Thereafter, optical parametric oscillation was studied with collinear and noncollinear phase matching using a Fabry-Perot cavity. The OPO pumped by a Q-switched Gaussian beam, and hence using collinear phase matching had a signal wave at 1596.3 nm and a bandwidth at FWHM of 4 nm. The OPO pumped by a conical beam, hence a Bessel beam and noncollinear phase matching, had a signal wave at 1596.5 nm and a bandwidth at FWHM of 0.2 nm. Both OPOs had a beam quality factor M2~2 in horizontal and vertical direction.

Стилі APA, Harvard, Vancouver, ISO та ін.

Birge, Jonathan R. (Jonathan Richards). "Methods for engineering sub-two-cycle mode-locked lasers." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/53192.

Повний текст джерела

Анотація:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 159-166).
We begin by presenting a method to efficiently solve for the steady-state solution of a nonlinear cavity, suitable for simulating a solid-state femtosecond laser. The algorithm directly solves the periodic boundary value problem by using a preconditioned Krylov-Newton shooting solver. The method can be applied to the design and study of mode-locked lasers, as well as the modeling of field enhancement cavities, such as those used in high harmonic generation. In contrast to the standard approach of dynamic simulation, which converges linearly, our algorithm converges quadratically to the stable solution, typically converging two to three orders of magnitude faster than the standard approach. The second major theme is the control of dispersion in mode-locked lasers. The predominant way to design dispersion compensating optics in the past has been a consideration of the integrated net group delay dispersion (GDD). We propose and implement an alternative spectral quantity based on the energy contained in phase distortions, which we term the Phase Distortion Ratio (PDR). Dispersion compensating mirrors optimized with respect to PDR generally perform significantly better than those where GDD is optimized. We demonstrate this in the design of a dispersion compensating mirror pair capable of compressing single-single pulses. In the final section, we deal with the unique challenges inherent to measuring sub-two-cycle pulses reliably and accurately. We have recently developed a technique, Two-Dimensional spectral Shearing Interferometry (2DSI), based on spectral shearing, which requires no calibration and does not disperse the pulse being measured.
(cont.) Our method intuitively encodes spectral group delay in a slowly changing fringe in a two-dimensional interferogram. This maximizes use of spectrometer resolution, allowing for complex phase spectra to be measured with high accuracy over extremely large bandwidths, potentially exceeding an octave. We believe that 2DSI is a uniquely cost effective and efficient method for accurately and reliably measuring few- and even single-cycle pulses. While the method is relatively recent, it is well tested and has been successfully demonstrated on several different lasers in two different groups, including one producing 4.9 fs pulses.
by Jonathan R. Birge.
Ph.D.

Стилі APA, Harvard, Vancouver, ISO та ін.

Bruno, Antonio 1972. "Tearing-mode transport model in the reversed field pinch concept." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/30007.

Повний текст джерела

Анотація:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 2002.
Includes bibliographical references (leaves 185-188).
In this thesis, a self-consistent model for analyzing the transport performance of a Reversed Field Pinch (RFP)-type of thermonuclear fusion reactor has been developed. The study has been focused on determining equilibrium configurations which describe a plasma evolution dominated by particular instabilities originated by plasma electrical resistivity (tearing-, or resistive interchange, modes). The ultimate goal is to provide a model of transport scaling in an RFP which can evaluate the global parameters describing the plasma confinement performance. Starting from a magnetic field configuration essentially given by Taylor's relaxation model, the self-consistent pressure profile is determined by assuming that the ohmic heating source raises the plasma pressure until the profile is locally marginally stable to tearing modes. A critical point here is the long held belief that an RFP, because of its bad curvature, would always be unstable to tearing or resistive interchange modes; that is, no marginally stable state exists. This belief turns out to be untrue. The basis for this statement is a careful ordering of the resistive layer dynamics, showing that thermal conductivity dominates over convection and compressibility. Thus, the use of the adiabatic equation of state in earlier work is not accurate for an RFP.
(cont.) As a result, tearing and interchange modes can indeed be stabilized in an RFP. In this model, a proper, selfconsistent definition of tearing-mode marginality has been used as a prescription for building the pressure profile. The actual numerical determination of the marginally stable profiles can be solved by using state-of-the-art personal computers. It is worth emphasizing that there are no free parameters in the model. Point checks indicate reasonable agreement with typical experimental data. Parametric numerical studies are also shown, spanning the operational space of RFP experiments, and finally providing the tearing mode transport scaling relations for the global confinement parameters. Comparisons with experiments as well as other transport models are shown.
by Antonio Bruno.
Ph.D.

Стилі APA, Harvard, Vancouver, ISO та ін.

Balucan, Phillip James 1977. "Model reduction of a set of elastic, nested gimbals by component mode selection criteria and static correction modes." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/17520.

Повний текст джерела

Анотація:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2001.
Includes bibliographical references (p. 112-113).
Model reduction techniques provide for a computationally inexpensive method for solving elastic dynamic problems with complex structures. The elastic nested gimbal problem is a problem which requires model reduction techniques as a means to reduce the dynamic equations. This is done using two methods: one technique employs mode ranking criteria to select modes which influence the dynamics of the problem the most. The second involves the use of static correction modes along with vibration modes to simulate the dynamics of this nested gimbal model. A model of the structure is described in terms of a lumped-parameter finite element model. This mathematical model of the physical system serves as the ha.sis for developing model reduction techniques for the nested gimbal problem. A truth model based on given initial conditions is used to compare the accuracy of the model reduced problem. A number of model reduction theories are described and applied to the gimbal simulation. The equations for the mode ranking techniques and the static and vibration mode analysis are developed as well as a quantitative error measure. Comparisons are made with the truth model using the mode ranking criteria base on the momentum coefficients and the frequency cutoff criteria. Test cases are also run using the static correction modes with vibration modes and static correction modes with the ranked vibration modes using momentum coefficients. The use of various static modes is discussed during the implementation of the static correction mode method. Applying the model reduction theories to a set of elastic, nested gimbals, the mode ranking criteria provides better results based on the error measure than the frequency cutoff criteria when the simulation is run using less than twenty-five modes. Using static modes along with ranked modes to represent the elastic dynamics of the problem does not provide better results than using the unranked vibration modes with the static modes. Modeling the dynamics using static correction modes with the unranked vibration modes provides the best results while using the lea.st number of modes. It is advantageous to take into account the given conditions applied to the system when reducing the model of a complex dynamic problem.
by Phillip James Balucan.
S.M.

Стилі APA, Harvard, Vancouver, ISO та ін.

Manoharan, Mohan. "Combined mode I - mode III plane strain fracture toughness of two high carbon steels /." The Ohio State University, 1988. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487594970651702.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Moyer, Gordon Stanley 1961. "AN EXPERT SYSTEM FOR FAILURE MODE INVESTIGATION IN RELIABILITY ENGINEERING." Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/277237.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, De-Shiou. "Sliding mode observers for automotive alternator." The Ohio State University, 1998. http://rave.ohiolink.edu/etdc/view?acc_num=osu1384448652.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hosoda, Takamichi 1965. "Incorporating unobservable heterogeneity in discrete choice model : mode choice model for shopping trips." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/9498.

Повний текст джерела

Анотація:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1999.
Includes bibliographical references (leaves 90-95).
In this thesis, we propose a methodology for incorporating attitudinal data in a choice model to capture unobservable heterogeneity across the population. The key features of this approach are, 1) the concept of latent attitudes, and the assumption that 2) the respondent's answers to psychometric attitudinal questions relating to the importance of attributes are manifestations of these attitudes and that 3) those attitudinal data bring sufficient information to capture unobservable heterogeneity across the population in the context of choice behavior. Each individual is probabilistically assigned to a finite number of segments according to his/her own value of latent attitudinal variable(s) as well as to threshold parameter(s) common to the population. Segment-specific parameters are estimated simultaneously. An empirical case study on shopping trip mode choice demonstrates the effectiveness of the methodology.
by Takamichi Hosoda.
S.M.

Стилі APA, Harvard, Vancouver, ISO та ін.

Yin, Hang. "Mode switch for component-based multi-mode systems." Licentiate thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-16153.

Повний текст джерела

Анотація:

Component-based software engineering is becoming a prominent solution to the development of complex embedded systems. Since it allows a system to be built by reusable and independently developed components, component-based development substantially facilitates the development of a complex embedded system and allows its complexity to be better managed. Meanwhile, partitioning system behavior into multiple operational modes is also an effective approach to reducing system complexity. Combining the component-based approach with the multi-mode approach, we get a component-based multi-mode system, for which a key issue is its mode switch handling. The mode switch of such a system corresponds to the joint mode switches of many hierarchically organized components. Such a mode switch is not trivial as it amounts to coordinate the mode switches of different components that are independently developed. Since most existing approaches to mode switch handling assume that mode switch is a global event of the entire system, they cannot be easily applied to component-based multi-mode systems where both the mode switch of the system and each individual component must be considered, and where components cannot be assumed to have global knowledge of the system. In this thesis, we present a mechanism---the Mode Switch Logic (MSL)---which provides an effective solution to mode switch in component-based multi-mode systems. MSL enables a multi-mode system to be developed in a component-based manner, including (1) a mode-aware component model proposed to suit the multi-mode context; (2) a mode mapping mechanism for the seamless composition of multi-mode components and their mode switch guidance; (3) a mode switch runtime mechanism which coordinates the mode switches of all related components so that the mode switch can be correctly and efficiently performed at the system level; and (4) a timing analysis for mode switches realized by MSL. All the essential elements of MSL are additionally demonstrated by a case study.
ARROWS

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Mode engineering"

Wilfrid, Perruquetti, and Barbot Jean Pierre 1958-, eds. Sliding mode control in engineering. New York: M. Dekker, 2002.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Saleh, Resve A. Mixed-Mode Simulation. Boston, MA: Springer US, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Marcellis, Andrea De. Analog Circuits and Systems for Voltage-Mode and Current-Mode Sensor Interfacing Applications. Dordrecht: Springer Science+Business Media B.V., 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Viniotis, Yannis. Asynchronous Transfer Mode Networks. Boston, MA: Springer US, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Saleh, Resve. Mixed-Mode Simulation and Analog Multilevel Simulation. Boston, MA: Springer US, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Inc, MindShare, ed. Protected mode software architecture. Reading, Mass: Addison-Wesley, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Imine, Hocine. Sliding Mode Based Analysis and Identification of Vehicle Dynamics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Utkin, Vadim Ivanovich. Sliding mode control in electromechanical systems. 2nd ed. Boca Raton, FL: CRC Press, 2009.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

PEM fuel cell failure mode analysis. Boca Raton: Taylor & Francis, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Vaidyanathan, Sundarapandian, and Chang-Hua Lien, eds. Applications of Sliding Mode Control in Science and Engineering. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-55598-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Mode engineering"

Munje, Ravindra, Balasaheb Patre, and Akhilanand Tiwari. "Sliding Mode Control." In Energy Systems in Electrical Engineering, 79–91. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3014-7_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bird, John. "Mean, median, mode and standard deviation." In Engineering Mathematics, 393–99. 8th edition. | Abingdon, Oxon ; New York, NY : Routledge, 2017.: Routledge, 2017. http://dx.doi.org/10.4324/9781315561851-56.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Singh, Tarun Pratap, Satish Kumar, and Rajeev Kumar. "Mathematical Model of Sliding Mode Triboelectric Energy Harvester." In Lecture Notes in Mechanical Engineering, 1745–54. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0550-5_168.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Robinson, R. G. "Testing Mode and Soil Parameters." In Developments in Geotechnical Engineering, 31–50. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-5871-5_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bird, John. "Mean, median, mode and standard deviation." In Basic Engineering Mathematics, 355–61. 7th ed. | Abingdon, Oxon ; New York, NY : Routledge, 2017.: Routledge, 2017. http://dx.doi.org/10.4324/9781315561776-49.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Humer, Karl, Elmar K. Tschegg, and Harald W. Weber. "Small Specimens and New Testing Techniques for Fiber Reinforced Plastics in the Crack Opening Mode (Mode I) and in the Shear Mode (Mode II)." In Advances in Cryogenic Engineering Materials, 999–1006. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4757-9053-5_127.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Guoquan, Cheng Zhao, Liangcheng Zhang, and Yong Chen. "Acoustic Mode and Structure Mode Analysis of Heavy Duty Truck Muffler." In Lecture Notes in Electrical Engineering, 1655–68. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33738-3_60.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Horn, Andreas, Wen-Chin Li, and Graham Braithwaite. "Human-Centered Design of Flight Mode Annunciation for Instantaneous Mode Awareness." In Engineering Psychology and Cognitive Ergonomics, 137–46. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91122-9_12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Huang, Xinyu, Bo Cao, and Xiaosheng Xiao. "Harmonic Mode Locking of Dual-Wavelength Mode-Locked All-Fiber Laser." In Lecture Notes in Electrical Engineering, 105–8. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-13-3381-1_18.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Manz, J. "Mode Selective Bimolecular Reactions." In Topics in Molecular Organization and Engineering, 365–404. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-2853-4_15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Mode engineering"

Strzebonski, Pawel, Bradley Thompson, Katherine Lakomy, Paul Leisher, and Kent D. Choquette. "Mode Engineering via Waveguide Structuring." In 2018 IEEE International Semiconductor Laser Conference (ISLC). IEEE, 2018. http://dx.doi.org/10.1109/islc.2018.8516196.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Choquette, Kent D. "Optical Mode Engineering in VCSELs." In 2021 27th International Semiconductor Laser Conference (ISLC). IEEE, 2021. http://dx.doi.org/10.1109/islc51662.2021.9615855.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kaiwu Liang, Zhiyong Cai, Wenhe Wang, and Chun Liu. "Construction mode of safety engineering laboratory." In 2012 First National Conference for Engineering Sciences (FNCES). IEEE, 2012. http://dx.doi.org/10.1109/nces.2012.6543800.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liang, Kaiwu, Zhiyong Cai, Chun Liu, and Wenhe Wang. "Construction mode of safety engineering laboratory." In 2013 the International Conference on Education Technology and Information Systems (ICETIS 2013). Paris, France: Atlantis Press, 2013. http://dx.doi.org/10.2991/icetis-13.2013.64.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

"Sliding mode: control engineering in practice." In Proceedings of the 1999 American Control Conference. IEEE, 1999. http://dx.doi.org/10.1109/acc.1999.782758.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kotov, Oleg, Ivan Chapalo, and Andrey Medvedev. "Mode-mode interference sensor with increasing number of modes along the multimode optical fiber." In SPIE Optical Engineering + Applications, edited by Katherine Creath, Jan Burke, and Joanna Schmit. SPIE, 2014. http://dx.doi.org/10.1117/12.2062158.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shang, Xiaohui, Li Gao, and Mingying Lan. "Model for mode control in mode-division multiplexing system." In 2015 5th International Conference on Computer Sciences and Automation Engineering (ICCSAE 2015). Paris, France: Atlantis Press, 2016. http://dx.doi.org/10.2991/iccsae-15.2016.66.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Loniewski, Grzogorz, Ausias Armesto, and Emilio Insfran. "An architecture-oriented model-driven requirements engineering approach." In 2011 Model-Driven Requirements Engineering Workshop (MoDRE). IEEE, 2011. http://dx.doi.org/10.1109/modre.2011.6045364.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wu, Jianbo, Zhixue Liu, and Touping Yang. "Generalized Operator Model in VMI and TPL Integrated Mode." In Engineering Management. IEEE, 2008. http://dx.doi.org/10.1109/icrmem.2008.11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Apiwattanalunggarn, Polarit, Steven W. Shaw, and Christophe Pierre. "Component Mode Synthesis Using Nonlinear Normal Modes." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/vib-48441.

Повний текст джерела

Анотація:

This paper describes a methodology for developing reduced-order dynamic models of nonlinear structural systems that are composed of an assembly of component structures. The approach is a nonlinear extension of the fixed-interface component mode synthesis technique developed for linear structures by Hurty and modified by Craig and Bampton. Specifically, the case of nonlinear substructures is handled by using fixed-interface nonlinear normal modes. These normal modes are constructed for the various substructures using an invariant manifold approach, and are then coupled through the traditional linear constraint modes (i.e., the static deformation shapes produced by unit interface motions). A simple system is used to demonstrate the proof of concept and show the effectiveness of the proposed procedure. Simulations are performed to show that the reduced-order model obtained from the proposed procedure outperforms the reduced-order model obtained from the classical fixed-interface linear component mode synthesis approach. Moreover, the proposed method is readily applicable to large-scale nonlinear structural systems.

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Mode engineering"

BOGER, R. M. Engineering task plan for rotary mode core sample truck calibration procedure support engineering. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/782422.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

BOGER, R. M. Engineering task plan for rotary mode core sampling exhausters CAM high radiation interlock. Office of Scientific and Technical Information (OSTI), May 1999. http://dx.doi.org/10.2172/782289.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Turanova, Larisa, and Andrey Styugin. Electronic course "Introduction to engineering class". Science and Innovation Center Publishing House, November 2020. http://dx.doi.org/10.12731/introduction_to_engineering_class.

Повний текст джерела

Анотація:

The electronic course "Introduction to the engineering class" is an electronic educational course for the implementation of the module of the vocational guidance program of additional education for schoolchildren of a technical orientation. Powered by LMS Moodle platform, contains multimedia and interactive resources. Available through a browser with built-in FleshPlayer, no additional software required. The electronic course includes materials on mathematics, physics, astronomy. Classes based on the e-course involve the use of electronic course resources in teleconference mode and independent work mode.

Стилі APA, Harvard, Vancouver, ISO та ін.

BOGER, R. M. Engineering tasl plan for the development, fabrication and installation of rotary mode core sample truck bellows. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/782391.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

BOGER, R. M. Engineering task plan for the annual revision of the rotary mode core sampling system safety equipment list. Office of Scientific and Technical Information (OSTI), May 1999. http://dx.doi.org/10.2172/782297.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

G., A., and T. Hsiao. Protocol Extension for Support of Asynchronous Transfer Mode (ATM) Service Class-aware Multiprotocol Label Switching (MPLS) Traffic Engineering. RFC Editor, March 2003. http://dx.doi.org/10.17487/rfc3496.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

BOGER, R. M. Engineering task plan for the development, fabrication and installation of rotary mode core sample truck grapple hoist box level wind system. Office of Scientific and Technical Information (OSTI), May 1999. http://dx.doi.org/10.2172/782305.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chamberlain, C. A., and K. Lochhead. Data modeling as applied to surveying and mapping data. Natural Resources Canada/CMSS/Information Management, 1988. http://dx.doi.org/10.4095/331263.

Повний текст джерела

Анотація:

The Geodetic Survey Division of the Canada Centre for Surveying is replacing the National Geodetic Data Base (NGDB) with the National Geodetic Information System (NGIS). For the NGIS to be successful, it was recognized that a sound, well engineered data mode was essential. The methodology chosen to design the data mode! was Nijssen's Information Analysis Methodology (NIAM), a binary modeling technique that is supported by a Computer Aided Software Engineering (CASE) tool, PC-IAST. An NGIS prototype has also been developed using Digital Equipment of Canada's Relational Database (Rdb) management system and COGNOS Corporations POWERHOUSE 4th generation language. This paper addresses the need for, and the advantages of using a strong engineering approach to data modeling and describes the use of the NIAM methodology in NGIS development. The paper identifies the relationship between the data mode!, data structures, the design and development of a database and the use of automated tools for systems development. In conclusion, critical success factors for the continuation of the N.G.I.S. developments are identified and the benefits that will accrue are enumerated.

Стилі APA, Harvard, Vancouver, ISO та ін.

Blackburn, Mark. Introducing Model Based Systems Engineering Transforming System Engineering through Model-Based Systems Engineering. Fort Belvoir, VA: Defense Technical Information Center, March 2014. http://dx.doi.org/10.21236/ada605264.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Blackburn, Mark, Rob Cloutier, Gary Witus, and Eirik Hole. Introducing Model-Based System Engineering Transforming System Engineering through Model-Based Systems Engineering. Fort Belvoir, VA: Defense Technical Information Center, March 2014. http://dx.doi.org/10.21236/ada603095.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!