Готові списки джерел за темами / Microscopy – Equipment and supplies

Добірка наукової літератури з теми "Microscopy – Equipment and supplies"

Автор: Grafiati
Опубліковано: 10 грудня 2022
Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Microscopy – Equipment and supplies".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Microscopy – Equipment and supplies"

1

Lyman, Charles. "World's Largest Microscopy Exhibition." Microscopy Today 19, no. 3 (April 28, 2011): 7. http://dx.doi.org/10.1017/s1551929511000320.

Повний текст джерела
Анотація:
The upcoming Microscopy & Microanalysis 2011 meeting in Nashville will include the world's largest annual exhibition of microscope equipment, supplies, and services. For most attendees, the exhibition is one of the highlights of the M&M meeting.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Crang, R. F. E. "Artifacts from dehydration and drying in biological specimen preparation for scanning electron microscopy." Proceedings, annual meeting, Electron Microscopy Society of America 49 (August 1991): 342–43. http://dx.doi.org/10.1017/s0424820100086015.

Повний текст джерела
Анотація:
Experienced electron microscopists recognize that common problems can exist if care is not taken with biological sample preparation, but such situations may not often be recognized by students or technicians with limited experience. The problems encountered in biological SEM specimen preparation may involve all steps in obtaining the tissue, fixing and/or washing it, dehydration, drying, mounting or coating. Specifically, attention in this presentation is directed at problems and techniques in dehydration and drying. Although some of the remedies require specialized equipment, most suggested ways of coping with problems are based on procedures which involve only commonly available supplies and facilities.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Fedorov, I. I., K. V. Berkovich, E. S. Vandysheva, V. A. Tyshchenko, and N. M. Maximov. "Study of atypical organosulfur deposits in the heat-exchange equipment of primary oil refining units." Industrial laboratory. Diagnostics of materials 88, no. 9 (September 21, 2022): 42–46. http://dx.doi.org/10.26896/1028-6861-2022-88-9-42-46.

Повний текст джерела
Анотація:
The formation of deposits in rectification columns and heat exchange equipment leads to violations of the technological process, and in some cases to an emergency shutdown of the equipment. To prevent deposits, it is necessary to know their chemical composition and genesis. We present the results of studying atypical organosulfur deposits in the heat exchange equipment of primary oil refining units. The structure and composition of the deposits were analyzed by scanning electron microscopy, and the chemical composition was determined using X-ray fluorescence analysis. It is shown that elemental sulfur present in the composition of the deposits acts as an additional corrosion factor that affects corrosion processes. Sulfur, being adsorbed on the surface of the equipment, blocks the access of the corrosion inhibitor to the metal surface thus reducing the effectiveness of the reagent. The neutralizer supplied to the helmet line of the atmospheric column can neutralize the acidic components (HCl and H2S), but it is not able to neutralize the effect of sulfur on the inner surface of the metal of air coolers. The results obtained can be used to improve the control of heat exchange equipment of primary oil refining units.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Just, T., E. Srur, O. Stachs, and H. W. Pau. "Volumetry of human taste buds using laser scanning microscopy." Journal of Laryngology & Otology 123, no. 10 (May 27, 2009): 1125–30. http://dx.doi.org/10.1017/s0022215109005507.

Повний текст джерела
Анотація:
AbstractObjective:In vivo laser scanning confocal microscopy is a relatively new, non-invasive method for assessment of oral cavity epithelia. The penetration depth of approximately 200–400 µm allows visualisation of fungiform papillae and their taste buds.Materials and methods:This paper describes the technique of in vivo volumetry of human taste buds. Confocal laser scanning microscopy used a diode laser at 670 nm for illumination. Digital laser scanning confocal microscopy equipment consisted of the Heidelberg Retina Tomograph HRTII and the Rostock Cornea Module. Volume scans of fungiform papillae were used for three-dimensional reconstruction of the taste bud.Results:This technique supplied information on taste bud structure and enabled measurement and calculation of taste bud volume. Volumetric data from a 23-year-old man over a nine-day period showed only a small deviation in values. After three to four weeks, phenomenological changes in taste bud structures were found (i.e. a significant increase in volume, followed by disappearance of the taste bud and appearance of a new taste bud).Conclusions:The data obtained indicate the potential application of this non-invasive imaging modality: to evaluate variation of taste bud volume in human fungiform papillae with ageing; to study the effects of chorda tympani nerve transection on taste bud volume; and to demonstrate recovery of taste buds in patients with a severed chorda tympani nerve who show recovery of gustatory sensibility after surgery.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

ZHUSUBALIYEV, ZHANYBAI T., EVGENIY A. SOUKHOTERIN, VADIM N. RUDAKOV, YURI V. KOLOKOLOV, and ERIK MOSEKILDE. "BIFURCATIONS AND CHAOTIC OSCILLATIONS IN AN AUTOMATIC CONTROL RELAY SYSTEM WITH HYSTERESIS." International Journal of Bifurcation and Chaos 11, no. 05 (May 2001): 1193–231. http://dx.doi.org/10.1142/s0218127401002699.

Повний текст джерела
Анотація:
The dynamics of relay system with hysteresis is investigated. Systems of this type have a broad range of applications for power control and temperature regulation or in order to obtain highly stabilized electric or magnetic fields. Examples are power supplies for radio-electronics, computer equipment or spacecrafts, test stands for investigations of high- or low-temperature superconductivity, electron microscopes, and nuclear magnetic resonance tomographs. We first describe a general approach to determine stable and unstable periodic orbits for systems with hysteresis. Considering a concrete example of a four-dimensional relay system with hysteresis we hereafter determine the regions of periodic and chaotic oscillations in parameter space. The regularities in the occurrence of periodic motions are studied, and the associated bifurcations are described. The causes of nondeterminate (i.e. chaotic) dynamics are discussed and the influence of an external noise signal is analyzed.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Evans, N. D., and M. K. Kundmann. "Plug-in scripts for EFTEM automation." Proceedings, annual meeting, Electron Microscopy Society of America 54 (August 11, 1996): 546–47. http://dx.doi.org/10.1017/s0424820100165197.

Повний текст джерела
Анотація:
Post-column energy-filtered transmission electron microscopy (EFTEM) is inherently challenging as it requires the researcher to setup, align, and control both the microscope and the energy-filter. The software behind an EFTEM system is therefore critical to efficient, day-to-day application of this technique. This is particularly the case in a multiple-user environment such as at the Shared Research Equipment (SHaRE) User Facility at Oak Ridge National Laboratory. Here, visiting researchers, who may oe unfamiliar with the details of EFTEM, need to accomplish as much as possible in a relatively short period of time.We describe here our work in extending the base software of a commercially available EFTEM system in order to automate and streamline particular EFTEM tasks. The EFTEM system used is a Philips CM30 fitted with a Gatan Imaging Filter (GIF). The base software supplied with this system consists primarily of two Macintosh programs and a collection of add-ons (plug-ins) which provide instrument control, imaging, and data analysis facilities needed to perform EFTEM.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kang, Sung Won, Seog Ku Kim, Young Im Kim, Sang Leen Yun, and Tae Yoon Lee. "Surface Characteristics of the Engineered Polymeric Media for Filtration and Adsorption in Urban Runoff." Materials Science Forum 510-511 (March 2006): 718–21. http://dx.doi.org/10.4028/www.scientific.net/msf.510-511.718.

Повний текст джерела
Анотація:
Urban runoff is one of the major sources that contaminates water supplies because it contains toxic compounds such as heavy metals and PAHs (poly aromatic hydrocarbons) as well as suspended solids, organic compounds, and nutrients. The eingineered polymetric media in this research were developed as filtering media in the storm water treatment equipment. The media used in this study can remove contaminants in urban runoff via adsorption and filtration. The engineered media composed of polypropylene and anion surfactant were foamed to have buoyacy and then shattered by mechanical device for efficient filtration. Surface characteristics of the engineered media were determined by using a scanning electron microscope and a microscope. Results indicated that surface area of the engineered media were increased from less than 0.05m2/g for the neither foamed nor shattered media to 7.82m2/g for the foamed and shattered media. Specific gravity of the media that were foamed and shattered was 0.108~0.154 whereas the non-treated media had specific gravity of 0.914. Fractal dimension of media was measured for the irregularity of the media shape and the media that had high fractal dimension value was performed high filtration efficiency of suspended solids in runoff.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Rubin, Ricardo Soares, Marco Aurélio Soares de Castro, and Dennis Brandão. "Disassembly of waste printed circuit boards using air heating and centrifugal force." Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental 23 (June 1, 2019): 28. http://dx.doi.org/10.5902/2236117036837.

Повний текст джерела
Анотація:
Waste electrical and electronic equipment is a significant source of material that can contribute to reduce environmental impacts associated to extraction and discard stages; therefore, it is necessary to develop efficient recycling processes for components such as Printed Circuit Boards (PCBs). Current methods for PCB recycling may be optimized by previous disassembly of such components. In the work reported here, an especially designed and manufactured centrifuge was employed to disassemble PCBs from power supplies (PS-PCBs) and memory chips (ME-PCBs) of personal computers (PCs), through combination of hot air flow and centrifugal force. The results showed that the device was capable of separating tin solder, electronic components (EC) and PCB substrate, as long as hazardous components and plastic parts are previously removed. A scanning electron microscope (SEM) with combined energy dispersive X-ray (EDX) analyzer showed that the recovered solder had under 3%wt of contamination; therefore, it can be employed in the production of new soldering material, replacing the more commonly used solder dross. EC recovery rates were up to 94%wt for PS-PCBs and 32%wt for ME-PCBs, and once components such as inductors were not visibly damaged in the process, possibilities of reusing recovered components may be further investigated.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gupta, Prabodh K. "Progression from on-site to point-of-care fine needle aspiration service: Opportunities and challenges." CytoJournal 7 (May 12, 2010): 6. http://dx.doi.org/10.4103/1742-6413.63195.

Повний текст джерела
Анотація:
Background Standard-of-care requires the availability of an efficient, economical and accurate on-site fine needle aspiration (FNA) service. Presence of a trained individual during the procedure ensures an improved patient care. Appropriate selection of the equipment, interaction with the clinicians and compliance with the various regulations during the procedure is essential. This is often done by an on-site FNA service. Organization and implementation of such a system in a large academic center is challenging. Method we reviewed the ambulatory care needs in the new Perelman Center for Advanced Medicine (PeCAM). Multiple (9) FNA sites have been established keeping in view the patient's convenience, clinic demands, various regulatory requirements and laboratory staff. Each location has dedicated FNA station with microscopes and supplies. In addition, state- ofthe -art technologies including a mobile FNA cart (Penn-A- Cart), remote specimen evaluation (TeleCyP) have been incorporated. Results The new set up is extremely efficient and much valued by the patients and the clinicians. It has improved patient care. Conclusion With necessary investments and resources a point-of-care FNA service has been created which has improved patient care. This, albeit with certain modifications may serve as a model for FNA service.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zavada, Jack. "Supplies and equipment." Day Care & Early Education 16, no. 2 (December 1988): 47. http://dx.doi.org/10.1007/bf01622989.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Microscopy – Equipment and supplies"

1

Harty, Michael David. "Statistical process control as a tool for expert system diagnostics." Thesis, Georgia Institute of Technology, 1989. http://hdl.handle.net/1853/24853.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Al-Ansary, Hany A. "Investigation and improvement of ejector-driven heating and refrigeration systems." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/36540.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Leane, Robert B. "Scanning tunnelling microscopy." Thesis, University of Cambridge, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.291716.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Bares, John Alvin 1951. "Preliminary equipment selection analysis of mining shovels and haulage trucks." Thesis, The University of Arizona, 1987. http://hdl.handle.net/10150/558076.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Rothsching, Norman. "The effect of shaft stiffness on the performance of the ice hockey slap shot." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0001/MQ43940.pdf.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Villaseñor-Herrera, Alejandro. "Recoil effect of the ice hockey stick during a slap shot." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81450.

Повний текст джерела
Анотація:
This thesis examined the 'recoil' effect of the ice hockey stick shaft during a stationary slap shot. Nine subjects were tested. Four were classified as 'elite' and the remaining five as the 'recreational' group. Their performances were evaluated by simultaneously recording stick movement and bending from high-speed video capture (1000 Hz) and puck acceleration from a triaxial accelerometer positioned inside the puck. Data were analyzed with a one-way ANOVA for several dependant variables including final puck velocity, stick shaft bending, blade-puck contact time and stick kinetic energy. The results indicated that: (1) the puck velocity was influenced by skill level, blade-puck contact time and stick bending energy but not puck acceleration. Further studies are needed to address the influence of events before and after blade-puck contact as well as the strength of the player on the mechanical energy and impulse given to the puck.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dowler, Patrick McLean 1983. "Effects of ice hockey facial protectors on response time and kinematics." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=111600.

Повний текст джерела
Анотація:
Ice hockey facial protectors are essential to prevent eye and dental injuries but must also not encumber vision and, in turn, players' performance. The purpose of this study was to investigate the effects of three different facial protection conditions on response time (RsT) and kinematics in a goal directed pointing task: helmet (control), visor, and cage. A 13 light target array and six-camera Vicon Mx system were used to collect response time and kinematic data. Subjects recruited were 16 male and 12 female varsity ice hockey players (n=28). Results demonstrated that although kinematics remained largely unaffected, throughout the visual field test RsT increased significantly with the cage (23 ms) as well as delayed head movement for both the visor (14 ms) and cage (18 ms). These differences may well represent a functional disadvantage to a player's performance given the dynamic, open environment where multiple players contest for puck possession. In summary, further research is warranted to achieve both optimal performance and safety.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Aspelund, Kristinn A. "Optimization of plate-fin-and-tube condenser performance and design for refrigerant R-410A air-conditioner." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/19488.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Triantafillopoulos, Nicholas G. "Fluid dynamics of short-dwell blade coater ponds and their relationship to cross directional coat weight nonuniformities." Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/5592.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Woo, Timothy Keith. "A three dimensional comparison of elite and recreational ice hockey slap shots /." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81455.

Повний текст джерела
Анотація:
The purpose of this thesis was to examine the three dimensional kinematic differences between elite and recreational ice hockey players while performing a stationary slap shot. Ten subjects, five elite-level players and five recreational players, each performed five stationary ice hockey slap shots. Data were collected using the UltratrakRTM electromagnetic system (Polhemus Inc., Burlington, VT, USA) at 60 Hz. Kinematics of the torso, arms and hockey stick were examined using a multiple analysis of variance (MANOVA). The results indicated that: (1) the elite subjects shot significantly (p < 0.05) faster due to the translational movement aspect of the stick; (2) the proximal to distal kinematic chain sequence of the elite subjects was better than the recreational subjects; and (3) the elite subjects showed less variability in stick movement within groups, than the recreational subjects. Further studies are needed to address kinematics of the lower limbs and of different ice hockey stick skills.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Microscopy – Equipment and supplies"

1

Rawlins, David. Light microscopy. Oxford: BIOS Scientific Publishers, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Chezar, Henry. Underwater microscope system. [Reston, Va.]: U.S. Dept. of the Interior, U.S. Geological Survey, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Chezar, Hank. Underwater microscope system. [Reston, Va.]: U.S. Dept. of the Interior, U.S. Geological Survey, 2001.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Chezar, Hank. Underwater microscope system. [Reston, Va.]: U.S. Dept. of the Interior, U.S. Geological Survey, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

R, José-Angel Conchello. Three-dimensional and multidimensional microscopy: Image acquisition and processing XV : 21 and 23-24 January 2008, San Jose, California, USA. Edited by SPIE (Society). Bellingham, Wash: SPIE, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

R, José-Angel Conchello. Three-dimensional and multidimensional microscopy: Image acquisition and processing XV : 21 and 23-24 January 2008, San Jose, California, USA. Edited by SPIE (Society). Bellingham, Wash: SPIE, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

R, José-Angel Conchello. Three-dimensional and multidimensional microscopy: Image acquisition and processing XVIII : 24-27 January 2011, San Francisco, California, United States. Edited by SPIE (Society). Bellingham, Wash: SPIE, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

R, José-Angel Conchello. Three-dimensional and multidimensional microscopy: Image acquisition and processing XVII : 25-28 January 2010, San Francisco, California, United States. Edited by SPIE (Society). Bellingham, Wash: SPIE, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

José-Angel, Conchello R., Cogswell Carol J, Wilson Tony, and Society of Photo-optical Instrumentation Engineers., eds. Three-dimensional and multidimensional microscopy: Image acquisition and processing XI : 27-29 January 2004, San Jose, California, USA. Bellingham, Wash: SPIE, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Lange, D. CMOS cantilever sensor systems: Atomic force microscopy and gas sensing applications. Berlin: Springer, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Microscopy – Equipment and supplies"

1

Dykstra, Michael J., and Laura E. Reuss. "Electron Microscopy Equipment and Supplies." In Biological Electron Microscopy, 493–98. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4419-9244-4_32.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fisher, Richard C., and Dominic Awariyah Adondaa. "Equipment and Supplies." In Global Orthopedics, 31–37. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-1578-7_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Fisher, Richard C., and Dominic Awariyah Adondaa. "Equipment and Supplies." In Global Orthopedics, 31–36. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13290-3_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Hibbs, Alan R. "Technical Supplies." In Confocal Microscopy for Biologists, 335–46. Boston, MA: Springer US, 2004. http://dx.doi.org/10.1007/978-0-306-48565-7_14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Goltra, Peter S. "Medical Supplies and Equipment." In Medcin, 691–706. New York, NY: Springer New York, 1997. http://dx.doi.org/10.1007/978-1-4612-2286-6_87.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Richardson, Graham T. "Illustrator’s Equipment and Supplies." In Illustrations, 205–70. Totowa, NJ: Humana Press, 1985. http://dx.doi.org/10.1007/978-1-4612-4992-4_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Erickson, Paul A. "Logistics: Expertise, Personnel, Equipment, Supplies." In Effective Environmental Emergency Responses, 23–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05893-6_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Hyman, Stanley. "Ten Suppliers of Electromedical Equipment." In Supplies Management for Health Services, 130–70. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003280231-11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Vandormael, Michel, Thomas Ischinger, and Robert Roth. "Angioplasty Equipment and Supplies: Technical Considerations." In Practice of Coronary Angioplasty, 93–127. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-70815-2_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Tricker, Ray. "Electrical equipment, components, accessories and supplies." In Wiring Regulations Pocket Book, 187–235. London: Routledge, 2021. http://dx.doi.org/10.1201/9781003165170-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Microscopy – Equipment and supplies"

1

Asano, Noboru, Kiyoshi Tsutsui, Takashi Yamashita, and Shizuo Furubo. "Power supplies for customer premises telecommunications equipment." In TELESCON '94 - The First International Telecommunications Energy Special Conference. IEEE, 1994. http://dx.doi.org/10.1109/telesc.1994.4794313.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Cucchietti, Flavio, Luca Giacomello, Patrizia Vaccarone, and Sara Rollino. "Ecoefficiency of universal power supplies for customer premises equipment." In INTELEC 2011 - 2011 33rd International Telecommunications Energy Conference. IEEE, 2011. http://dx.doi.org/10.1109/intlec.2011.6099736.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Broadley, E. T. "Autonomous Power Supplies for Remote, Safety Critical Electronic Equipment." In Road Transport Information and Control Conference 2014 (RTIC 2014). Institution of Engineering and Technology, 2014. http://dx.doi.org/10.1049/cp.2014.0804.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Mancini, N. "Canadian Standards Association Certification Requirements for Telephone Equipment Power Supplies." In INTELEC '86. IEEE, 1986. http://dx.doi.org/10.1109/intlec.1986.4794500.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Tian, Ailing, Hongjun Wang, Xueliang Zhu, Siwei Zhao, Fang Feng, and Bingcai Liu. "Design and Instrumentation of transmission digital holographic microscopy." In Optical Test, Measurement Technologies, and Equipment, edited by Xiaoliang Ma, Fan Wu, Bin Fan, Xiong Li, and Yudong Zhang. SPIE, 2019. http://dx.doi.org/10.1117/12.2505045.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Torok, Lajos, and Stig Munk-Nielsen. "Effect of voltage sags on digitally controlled line connected switched-mode power supplies." In 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2012. http://dx.doi.org/10.1109/optim.2012.6231757.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Yeh, L. T. "Transient Thermal Analysis of Outdoor Electronic Equipment." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1215.

Повний текст джерела
Анотація:
Abstract An outdoor electronic equipment is under consideration. In order to attain the desired system performance and reliability, the junction temperature of all electronic components and the base plate temperature of the power supply under the worst environmental conditions must be kept below 105°C and 85°C, respectively. A system level transient analysis is performed to determine the temperatures of the internal air and the power supplies which are mounted to the internal structures of the system. The transient is caused by the daily cycle of ambient temperature and solar flux. The internal air temperature and the base plate temperature of the power supply are computed for a 24-hour period. The above thermal design limits are met with the computed internal air temperatures and flow rates.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Kornev, Y. V. "Elastomeric Composites Surface Structure Study by Scanning Electron and Atomic Force Microscopy." In Modern Trends in Manufacturing Technologies and Equipment. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901755-45.

Повний текст джерела
Анотація:
Abstract. New elastomeric composites were synthesized with filler particles from rice husk products both in micro and sub-micron sizes. The obtained composites surface structure was investigated by scanning electron and atomic force microscopy. The application as a prospective strengthening sub-micron sizes filler for the composite complexes creation with high elastic and strength properties have been shown.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Jiang, Hongzhen, Yong Liu, Xu Liu, Dong Li, Fanglan Zheng, and Deqiang Yu. "Measurement for the structure of microcosmic defects on optical surface with digital holographic microscopy." In Optical Test, Measurement Technologies, and Equipment, edited by Xiaoliang Ma, Fan Wu, Bin Fan, Xiong Li, and Yudong Zhang. SPIE, 2019. http://dx.doi.org/10.1117/12.2511280.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Pelevin, I. "Surface Morphology Investigations of Nanocrystalline R2Fe14B (R = Y, Nd, Gd, Er) by Atomic Force Microscopy." In Modern Trends in Manufacturing Technologies and Equipment. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901755-15.

Повний текст джерела
Анотація:
Abstract. The study was aimed at microstructure investigations of melt-spun rare-earth intermetallic compounds using atomic force microscopy. Surface morphology of R2Fe14B (R = Y, Nd, Gd, Er) was studied with nanometric resolution. Grain structure features were discovered depending on the rare-earth element composition and quenching regime. Grain size dependence on rare earth elements' composition decreased with the metal's serial number and atomic weight. Wherein structural size dependence on quenching wheel speed had non-linear character: increase the speed from 20 to 30 m/s led to 3 times decrease of the grain size and significant surface roughness reduction.
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Microscopy – Equipment and supplies"

1

CORPS OF ENGINEERS WASHINGTON DC. Maintenance of Supplies and Equipment: Materiel Maintenance Policies. Fort Belvoir, VA: Defense Technical Information Center, February 1999. http://dx.doi.org/10.21236/ada404386.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

ARMY MATERIEL COMMAND ALEXANDRIA VA. Maintenance of Supplies and Equipment, Guide to Reliability-Centered Maintenance. Fort Belvoir, VA: Defense Technical Information Center, June 1985. http://dx.doi.org/10.21236/ada170938.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Dean, Jay B. Hyperbaric Imaging Equipment: Fluorescence Microscopy for In Vitro Studies of Oxygen Toxicity. Fort Belvoir, VA: Defense Technical Information Center, August 2004. http://dx.doi.org/10.21236/ada425309.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Stroud, Mary Ann. ARIES oxide production program legacy risk reduction project: Parts, supplies, and equipment assessment 2015 report. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1215823.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

DEPARTMENT OF THE ARMY WASHINGTON DC. Requisition and Issue of Supplies and Equipment: Special Authorization and Procedures for Issues, Sales, and Loans. Fort Belvoir, VA: Defense Technical Information Center, February 2002. http://dx.doi.org/10.21236/ada402450.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sloan, Larry R. Should the Commander in Chief, United States Special Operations Command Have the Authority to Develop and Acquire Special Operations- Peculiar Equipment, Material, Supplies or Services? Fort Belvoir, VA: Defense Technical Information Center, April 1989. http://dx.doi.org/10.21236/ada209781.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Doo, Johnny. Unsettled Issues Concerning the Opportunities and Challenges of eVTOL Applications during a Global Pandemic. SAE International, October 2020. http://dx.doi.org/10.4271/epr2020022.

Повний текст джерела
Анотація:
Electric vertical takeoff and landing (eVTOL) aircraft technology has developed beyond the traditional aviation industry and now influences the creation of new and novel transportation applications. Some experts even suggest on-demand eVTOL logistics capabilities could be harnessed by crisis response teams to c ombat a future pandemic. The lessons of the COVID-19 crisis highlighted the challenges of managing a global pandemic response due to the difference in regional and local resources, culture, and political systems. Although there may not be a uniform crisis management strategy that the world can agree on, next-generation vertical flight vehicles could be used to distribute limited medical equipment, supplies, and personnel to hot spots faster than conventional aircraft or ground vehicles. However, creating this capability is not easy. This SAE EDGE™ Research Report by Johnny Doo addresses the opportunities and challenges of establishing an eVTOL fleet, including deployment, supporting infrastructure, and fleet management.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Integration of STI and HIV/AIDS with MCH-FP Services: A case study of the Nakuru Municipal Council's project on strengthening STD/AIDS control. Population Council, 1997. http://dx.doi.org/10.31899/rh1997.1004.

Повний текст джерела
Анотація:
Kenya’s Nakuru Municipal Council (NMC) operates five clinics located primarily in residential areas with high concentrations of people. The clinics provide basic antenatal, child welfare, STI, and other curative services, and family planning services are available at four of the clinics. One provincial referral hospital operated by the Ministry of Health also provides MCH-FP and HIV/STI services in a special STI treatment clinic. The seven public health facilities in Nakuru Municipality are participating in a collaborative project with the Department of Community Health at the University of Nairobi, the University of Manitoba in Canada, and the Nairobi Municipal City Council. The goal is to reduce the incidence of STD's, including HIV/AIDS in Kenya, through strengthening management of STDs and AIDS at the health facilities and establishing sustainable community-based STD/AIDS control activities with an emphasis on women's participation. This report describes a case study of the integration activities being undertaken by the NMC. NMC clinics have adequate basic infrastructure to provide MCH-FP and STI/HlV/AlDS services using an integrated approach, however they lack basic equipment and supplies to support the integration of these services.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Situation analysis of LGU Health Centers for integrating RTI management within the Philippines FP/MCH Program. Population Council, 1997. http://dx.doi.org/10.31899/rh1997.1024.

Повний текст джерела
Анотація:
A Situation Analysis (SA) was conducted in seven local government health centers as part of a larger project studying the feasibility of integrating RTI services within the existing Family Planning/Reproductive Health Program of the Department of Health (DOH). The SA was part of a series of baseline activities conducted by the Family Planning Operations Research and Training Project as part of its study on Integrating RTI Management in Local Government Unit Health Centers. It was conducted by Population Council, Manila, for the DOH. Participating health centers were located in a large and highly urbanized community, a medium-sized city, and two semi-urban municipalities. The research team visited these centers to examine existing facilities and equipment, staff capabilities, and client-provider interactions. Clients related their perceptions about quality of service. SA results showed that FP/MCH and other services offered in the clinics were generally satisfactory. In the clinics that had a laboratory, capacity was limited due to inadequate supplies. None of the centers could conduct basic lab tests for RTIs. As this report indicates, clinic facilities, client-provider interaction, and staff capability, though satisfactory, can still be improved. However, RTI services are either lacking or only addressed inadequately.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Microscopy – Equipment and supplies" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії