Добірка наукової літератури з теми "Metrology of electromagnetism"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Metrology of electromagnetism".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Metrology of electromagnetism":
Cahan, David. "The awarding of the Copley Medal and the ‘discovery’ of the law of conservation of energy: Joule, Mayer and Helmholtz revisited." Notes and Records of the Royal Society 66, no. 2 (November 16, 2011): 125–39. http://dx.doi.org/10.1098/rsnr.2011.0045.
Storey, L. R. O. "<i>Letter to the Editor</i>: Revision of the basic equations of wave distribution function analysis." Annales Geophysicae 16, no. 5 (May 31, 1998): 651–53. http://dx.doi.org/10.1007/s00585-998-0651-3.
Kim, Sung, Jack Surek, and James Baker-Jarvis. "Electromagnetic Metrology on Concrete and Corrosion." Journal of Research of the National Institute of Standards and Technology 116, no. 3 (May 2011): 655. http://dx.doi.org/10.6028/jres.116.011.
Hao, Ling, John C. Gallop, and Jie Chen. "Electromagnetic Metrology for Nano- Electromechanical Systems." IEEE Transactions on Instrumentation and Measurement 68, no. 6 (June 2019): 1827–32. http://dx.doi.org/10.1109/tim.2018.2879068.
Neyezhmakov, Pavel, Serhii Buriakovskyi, Olena Vasylieva, Volodymyr Velychko, Fedir Venislavskyi, and Serhii Rudenko. "Implementation of NATO standards to improve the electromagnetic immunity and compatibility of equipment of the critical infrastructure objects." Ukrainian Metrological Journal, no. 1 (April 12, 2023): 9–20. http://dx.doi.org/10.24027/2306-7039.1.2023.282464.
Yuan, Guang Hui, and Nikolay I. Zheludev. "Detecting nanometric displacements with optical ruler metrology." Science 364, no. 6442 (May 9, 2019): 771–75. http://dx.doi.org/10.1126/science.aaw7840.
NIKOLAEV, M. YU, E. V. NIKOLAEVA, and A. K. NIKITIN. "PROCESS MODELING AND METROLOGY IN ELECTRICAL IMPULSE SYSTEMS." Actual Issues Of Energy 4, no. 1 (2022): 070–74. http://dx.doi.org/10.25206/2686-6935-2022-4-1-70-74.
Safarov, Abdurauf, Khurshid Sattarov, Makhammatyokub Bazarov, and Almardon Mustafoqulov. "Issues of the electromagnetic current transformers searching projecting." E3S Web of Conferences 264 (2021): 05038. http://dx.doi.org/10.1051/e3sconf/202126405038.
Vasylieva, Olena, and Pavel Neyezhmakov. "Metrological traceability of the results of testing for electromagnetic compatibility in accordance with the NATO standards." Ukrainian Metrological Journal, no. 2 (July 5, 2023): 7–15. http://dx.doi.org/10.24027/2306-7039.2.2023.286707.
Baker-Jarvis, James. "Electromagnetic Nanoscale Metrology Based on Entropy Production and Fluctuations." Entropy 10, no. 4 (October 8, 2008): 411–29. http://dx.doi.org/10.3390/e10040411.
Дисертації з теми "Metrology of electromagnetism":
Sahin, Seckin. "Ultra-wideband, On-Chip Phased Arrays for Millimeter-wave and Terahertz Applications." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1574177160069196.
Napolitano, Mario. "Interaction-based nonlinear quantum metrology with a cold atomic ensemble." Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/144558.
En aquest manuscrit presentem una recerca experimental i teòrica sobre mesures limitades pel soroll quàntic fetes mitjançant interferometria no lineal, o des de un altra perspectiva, mitjançant interacció. En el treball experimental es va fer servir una interfície quàntica de polarització entre polsos de llum en propagació i àtoms freds de rubidi-87 atrapats en una trampa òptica de dipol. Primer, farem un repàs de la teoria de la metrologia quàntica i de la teoria de la estimació, descriurem la proposició teòrica sobre metrologia quàntica no lineal tal i com la va desenvolupar el grup de Carlton M. Caves al Universitat de Nou Mèxic. A continuació descriurem la nostra proposta, feta al 2010, de com implantar la idea del grup de Caves fent servir interaccions òptiques no lineals en un conjunt d’àtoms freds amb la finalitat d’efectuar una mesura no lineal de spin. Per avaluar aquesta proposta vam desenvolupar dues aproximacions teòriques fent ús de dos mètodes diferents. En primer lloc vam estendre la tècnica de variables quàntiques col lectives cap als processos òptics no lineals, aquesta tècnica sovint és utilitzada per descriure interfícies quàntiques i conjunts de spin atòmics. Això dóna com a resultat un Hamiltonià efectiu que conté termes no lineals de la forma descrita pel grup de Caves, i demostra una equivalència qualitativa entre el nostre esquema i el seu. El segon mètode fa ús de les equacions de Maxwell-Bloch per descriure la propagació no lineal dels polsos a través del conjunt de spins atòmics, tenint en compte deshomogeneïtats i efectes de relaxació. D’aquesta manera podem fer prediccions quantitatives sobre senyals de rotació de polarització òptica en les condicions d’un experiment real. Seguirem amb la descripció de com vam implementar al laboratori la nostra proposta teòrica mitjançant una interfície quàntica de polarització entre llum i àtoms. Descriurem el ja existent sistema de confinament i sondeig dels àtoms, concentrant-nos en les característiques que permeten fer mesures al limit del soroll quàntic i del soroll de projecció. Aleshores detallarem com vam adaptar el sistema per l’ús amb polsos més curts i intensos, tal i com requereix la mesura no lineal, i al mateix temps com vam calibrar el sistema de detecció de llum en aquestes diferents condicions. El calibratge de la rotació no lineal de polarització en funció de la freqüència del làser de sonda, ens permet obtenir un senyal de rotació casi purament no lineal. Finalment, presentarem els resultats experimentals que mostren senyals de rotació no lineal limitats pel soroll quàntic al llarg de tres ordres de magnitud en el número N de fotons. Tals resultats son consistents amb els nostres models teòrics i confirmen una important predicció del treball del grup de Caves, és a dir que la interacció de dos fotons dóna una llei d’escala de N-3/2 per a la sensibilitat de la mesura. Per concloure, una concisa discussió relaciona aquesta observació experimental amb discussions teòriques sobre el “limit d’Heisenberg” de la metrologia quàntica, i amb d’altres possibles aplicacions de tècniques de mesura no lineal
Badenhorst, J. "Metrology and modelling of high frequency probes." Thesis, Link to the online version, 2008. http://hdl.handle.net/10019/808.
Le, Charles Tuan-Cong. "Angular memory effect and its interferometric applications in rough surface mean height profiling /." Thesis, Connect to this title online; UW restricted, 1996. http://hdl.handle.net/1773/6005.
Zhou, Mengxi. "CEM des implants cardiaques aux basses fréquences 50 Hz dans un contexte normatif." Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0110.
Targeting cardiology diagnosis and treatment, active implantable medical devices (AIMDs) have been rapidly developed and widely applied with constantly updated technologies in recent decades. It is vital for scientific research to catch up with the speed of the information era in terms of the side effects on human beings and the environment. Pacemakers (PMs), used for the treatment of arrhythmias (bradycardias and tachycardias), and implantable cardioverter defibrillators (ICDs), for palliating serious ventricular arrhythmias by electric shocks to the myocardial tissue are important AIMDs normally implanted in the human chest. Electromagnetic radiation is inevitable present in our surroundings and raised many questions concerning the potential effects on the AIMD-wearers. The increasing number of medical implant wearers, including those in active professional activities, has led to questions regarding their performance in the presence of an occupational electromagnetic field (EMF) exposure. Since the 1960s, these questions have concerned possible interference linked to the energy transport network. The frequencies allocated to electrical energy (50 Hz and 60 Hz) are in the analysis bandwidth of the cardiac signals, of which spectrum extends from a few Hertz to approximately 150 Hz. The AIMDs are usually equipped with selective filters enabling to significantly reduce or eliminate the interference. However, considering the nature formation of the heart signals, 50 Hz and 60 Hz may not be filtered in order to ensure the cardiac signal waves are correctly and completely sensed.In the workplaces, it is inevitable to have the existence of workers who are susceptible to the electromagnetic field (EMF)-related impact. The presence of workers wearing AIMDs is then to be considered as specific cases. In other words, particular attention should be given to AIMD carriers who are subject to higher risks and corresponding risk evaluation process should be established. The procedure for assessing the EMF exposures for workers bearing AIMDs was proposed in EN 50527 to determine the risk arising from the exposures in the workplaces. Immunity test on AIMDs is critical in the risk assessment procedure and requires a simple, feasible, and risk-free test method. To date, the electric field exposures at low frequencies has received little attention yet they commonly exist in the workplaces in electrical industries, for example, area near power lines and substations. In this study, high-intensity electric field exposures are mainly concerned. The frequency band was limited to extremely low frequency at 50 Hz to focus on the occupational exposures caused by power sources.The interference can be evaluated by the estimation of the induced voltage at its input. Equivalent systems can be built up by adopting this conception to reproduce the exposures and the implantation conditions in order to generate same effects at the input of cardiac implant (same induced voltage). In this work, a theoretical and experimental study was performed on an in vitro phantom that allowed to determine the voltage induced at the input of a cardiac implant subjected to a high-intensity electric field at 50 Hz. The phantom is composed of two parts with electrical characteristics similar to those of the human heart and the chest, where the cardiac lead and the housing are implanted. Experimental measurements and numerical simulation are coherent which validates the equivalence factors we found for our systems. Thus, the in vitro phantom can be applied as an equivalent system in the workplace for the immunity test on cardiac implants. Another result we established in this study is the equivalence between an electric field exposure system and an injection system which allows us to reduce the complexity of the study, and conduct simpler tests with reproduced perturbations
Matos, Carmen. "Robotically Controlled Measurement System for Millimeter-Wave Antennas." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1588180162492972.
Scheich, Roland. "Caractérisation et prédétermination des perturbations électromagnétiques conduites dans les convertisseurs de l'électronique de puissance." Grenoble INPG, 1993. https://hal.archives-ouvertes.fr/tel-02020576.
Galindo, Muñoz Natalia. "Development of direct measurement techniques for the in-situ internal alignment of accelerating structures." Doctoral thesis, Universitat Politècnica de València, 2018. http://hdl.handle.net/10251/100488.
In the next generation of linear particle accelerators, challenging alignment tolerances are required in the positioning of the components focusing, accelerating and detecting the beam over the accelerator length in order to achieve the maximum machine performance. In the case of the Compact Linear Collider (CLIC), accelerating structures, beam position monitors and quadrupole magnets need to be aligned in their support with respect to their reference axes with an accuracy of 10 um. To reach such objective, the PACMAN (Particle Accelerator Components Metrology and Alignment to the Nanometer Scale) project strives for the improvement of the current alignment accuracy by developing new methods and tools, whose feasibility should be validated using the major CLIC components. This Ph.D. thesis concerns the investigation, development and implementation of a new non-destructive intracavity technique, referenced here as 'the perturbative method', to determine the electromagnetic axes of accelerating structures by means of a stretched wire, acting as a reference of alignment. Of particular importance is the experimental validation of the method through the 5.5 mm iris-mean aperture CLIC prototype known as TD24, with complex mechanical features and difficult accessibility, in a dedicated test bench. In the first chapter of this thesis, the alignment techniques in particle accelerators and the novel proposals to be implemented in the future linear colliders are introduced, and a detailed description of the PACMAN project is provided. The feasibility study of the method, carried out with extensive electromagnetic fields simulations, is described in chapter 2, giving as a result, the knowledge of the theoretical accuracy expected in the measurement of the electromagnetic axes and facilitating the development of a measurement algorithm. The conceptual design, manufacturing and calibration of the automated experimental set-up, integrating the solution developed to measure the electromagnetic axes of the TD24, are covered in chapter 3. The future lines of research and developments of the perturbative method are also explored. In chapter 4, the most significant results obtained from an extensive experimental work are presented, analysed and compared with simulations. The proof-of-principle is completed, the measurement algorithm is optimised and the electromagnetic centre is measured in the TD24 with a precision less than 1 um and an estimated error less than 8.5 um. Finally, in chapter 5, the developments undertaken along this research work are summarised, the innovative achievements accomplished within the PACMAN project are listed and its impact is analysed.
En la generació pròxima d'acceleradors de partícules lineals, desafiant toleràncies d'alineament és requerit en el posicionament dels components que enfoquen, accelerant i detectant la biga sobre la longitud d'accelerador per tal d'aconseguir l'actuació de màquina màxima. En el cas del Colisionador Compacte Lineal (CLIC), accelerant estructures, monitors de posició de fes i imants necessiten ser alineats en el seu suport amb respectar a les seves destrals de referència amb una precisió de 10 um. Per assolir tal objectiu, el PACMAN (Metrologia de Components de l'Accelerador de partícules i Alineament al Nanometer Escala) projecte s'esforça per la millora de l'actual precisió d'alineament per mètodes nous en desenvolupament i eines, la viabilitat dels quals hauria de ser validada utilitzant els components de CLIC importants. Aquesta tesi concerneix la investigació, desenvolupament i implementació d'un nou no-destructiu tècnica interna, va referenciar ací mentre 'el mètode de pertorbació' per determinar les destrals electromagnètiques d'accelerar estructures mitjançant un cable estès, actuant com a referència d'alineament. De la importància particular és la validació experimental del mètode a través del 5.5 mm iris-roí obertura prototipus de CLIC sabut com TD24, amb característiques mecàniques complexes i accessibilitat difícil, en un banc de prova dedicat. En el primer capítol d'aquesta tesi, les tècniques d'alineament en acceleradors de partícules i les propostes novelles per ser implementades en el futur colisionador lineal és introduït, i una descripció detallada del projecte PACMAN és proporcionat. L'estudi de viabilitat el mètode de pertorbació, va dur a terme amb simulacres de camps electromagnètics extensos, és descrit dins capitol 2, donant com a resultat, el coneixement de la precisió teòrica esperada en la mida de les destrals electromagnètiques i facilitant el desenvolupament d'un algoritme de mida. El disseny conceptual, fabricació i calibratge del conjunt experimental automatitzat-amunt, integrant la solució desenvolupada per mesurar les destrals electromagnètiques del TD24, és cobert dins capitol 3. Les línies futures de recerca i desenvolupaments del mètode és també va explorar. Dins capitol 4, la majoria de resultats significatius van obtenir d'una faena experimental extensa és presentada, analitzat i comparat amb simulacres. La prova-de-el principi és completat, l'algoritme de mida és optimitzat i el centre electromagnètic és mesurat en el TD24 amb una precisió menys d'1 um i un error calculat menys de 8.5 um. Finalment, dins capitol 5, els desenvolupaments empresos al llarg d'aquesta faena de recerca és resumit, les consecucions innovadores van acomplir dins del projecte PACMAN és llistat i el seu impacte és analitzat.
Galindo Muñoz, N. (2018). Development of direct measurement techniques for the in-situ internal alignment of accelerating structures [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/100488
TESIS
Zheng, Jiabao. "Efficient spin-photon interface for solid-state-based spin systems for quantum information processing and enhanced metrology." Thesis, 2017. https://doi.org/10.7916/D8N87PB3.
Lauria, Eugene F. "A Study of a Reimaging System for Correcting Large-Scale Phase Errors in Reflector Antennas." 1992. https://scholarworks.umass.edu/theses/1210.
Книги з теми "Metrology of electromagnetism":
G, Bradford Ann, and National Institute of Standards and Technology (U.S.), eds. Metrology for electromagnetic technology: A bibliography of NIST publications. Washington, DC: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.
International Symposium on Electromagnetic Metrology (1989 Beijing, China). Electromagnetic metrology: Proceedings of International Symposium on Electromagnetic Metrology, ISEM '89, August 19-22, 1989, Beijing, China. Beijing: International Academic Publishers, 1989.
Motohisa, Kanda, and United States. National Bureau of Standards, eds. Electromagnetic compatibility and interference metrology: M.T. Ma, M. Kanda. Gaithersburg, Md: National Bureau of Standards, 1986.
E, DeWeese Mary, and National Institute of Standards and Technology (U.S.), eds. Metrology for electromagnetic technology: A bibliography of NIST publications. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1991.
E, Bailey A., and International Union of Radio Science., eds. URSI register of national standards laboratories for electromagnetic metrology. Bristol: A. Hilger, 1990.
E, DeWeese Mary, and United States. National Bureau of Standards, eds. Metrology for electromagnetic technology: A bibliography of NBS publications. Boulder, Colo: U.S. Dept. of Commerce, National Bureau of Standards, 1988.
M, Butler Chalmers, and National Institute of Standards and Technology (U.S.), eds. EMI/EMC metrology challenges for industry: A workshop on measurements, standards, calibrations, and accreditation. Boulder, Colo: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.
National Institute of Standards and Technology (U.S.), ed. METROLOGY FOR ELECTROMAGNETIC TECHNOLOGY: A BIBLIOGRAPHY OF NIST PUBLICATIONS... NIST 5064 ... U.S. DEPARTMENT OF COMMERCE... 1997. [S.l: s.n., 1998.
Electromagnetic compatibility and interference metrology. Gaithersburg, Md: National Bureau of Standards, 1986.
Beijing, China) International Symposium on Electromagnetic Metrology (1989 :. Electromagnetic Metrology: Proceedings of International Symposium on Electromagnetic Metrology, Isem '89, August 19-22, 1989 Beijing, China. International Academic Publishers, 1990.
Частини книг з теми "Metrology of electromagnetism":
Sainson, Stéphane. "Metrology and Environment." In Electromagnetic Seabed Logging, 131–212. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-45355-2_3.
Dubey, S. K., Saood Ahmad, C. K. Suman, Sandhya M. Patel, Sudhir Husale, Anurag G. Reddy, Anurag Gupta, and D. K. Aswal. "Electromagnetic Metrology for Smart Technologies." In Metrology for Inclusive Growth of India, 523–75. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8872-3_11.
Dubey, S. K., Saood Ahmad, C. K. Suman, Sandhya M. Patel, Sudhir Husale, Anurag G. Reddy, Anurag Gupta, and D. K. Aswal. "Electromagnetic Metrology for Smart Technologies." In Metrology for Inclusive Growth of India, 577–638. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8872-3_12.
Kahn, Walter K. "Inverse Methods in Microwave Metrology." In Inverse Methods in Electromagnetic Imaging, 1065–75. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5271-3_22.
Kahn, Walter K. "Inverse Methods in Microwave Metrology." In Inverse Methods in Electromagnetic Imaging, 1065–75. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-010-9444-3_61.
Narang, Naina, Anshika Verma, Jaydeep Singh, and Dharmendra Singh. "Electromagnetic Metrology for Microwave Absorbing Materials." In Handbook of Metrology and Applications, 1–21. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-1550-5_80-1.
Narang, Naina, Anshika Verma, Jaydeep Singh, and Dharmendra Singh. "Electromagnetic Metrology for Microwave Absorbing Materials." In Handbook of Metrology and Applications, 1421–41. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2074-7_80.
Rahmat-Samii, Y. "Antenna Diagnosis by Microwave Holographic Metrology." In Electromagnetic Modelling and Measurements for Analysis and Synthesis Problems, 17–50. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3232-9_2.
Nande, Swaraj Shekhar, Monika, Harish Singh Rawat, and Satya Kesh Dubey. "Study of Electromagnetic Induced Transparency and Its Dependence on Probe Decay for Cascade and Lambda Models." In Recent Advances in Metrology, 209–20. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2468-2_24.
"Commission A: Electromagnetic Metrology." In Review of Radio Science 1996-1999. IEEE, 2009. http://dx.doi.org/10.1109/9780470546352.part1.
Тези доповідей конференцій з теми "Metrology of electromagnetism":
Nsugbe, Ejay, Ibrahim Sanusi, Olusayo Obajemu, Oluwarotimi Williams Samuel, Mojisola Grace Asogbon, and Guanglin Li. "A Low Channel Number Sensing Approach for an Ethnic Specific Labour Immanency Prediction using Bio-Electromagnetism." In 2021 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT). IEEE, 2021. http://dx.doi.org/10.1109/metroind4.0iot51437.2021.9488436.
"Electromagnetic metrology." In 2004 Second International Workshop Ultrawideband and Ultrashort Impulse Signals. IEEE, 2004. http://dx.doi.org/10.1109/uwbus.2004.1388077.
"Electromagnetic metrology." In 2008 4th International Conference on Ultrawideband and Ultrashort Impulse Signals. IEEE, 2008. http://dx.doi.org/10.1109/uwbus.2008.4669427.
"Electromagnetic compatibility. Electromagnetic metrology." In 2010 5th International Conference on Ultrawideband and Ultrashort Impulse Signals (UWBUSIS 2010). IEEE, 2010. http://dx.doi.org/10.1109/uwbusis.2010.5609124.
"Electromagnetic compatibility. Electromagnetic metrology." In 2012 6th International Conference on Ultrawideband and Ultrashort Impulse Signals (UWBUSIS). IEEE, 2012. http://dx.doi.org/10.1109/uwbusis.2012.6379740.
Hao, Ling, John Gallop, and Jie Chen. "Electromagnetic Metrology for NEMS." In 2018 Conference on Precision Electromagnetic Measurements (CPEM 2018). IEEE, 2018. http://dx.doi.org/10.1109/cpem.2018.8500917.
Janssen, T. J. B. M., C. Giusca, J. Gallop, L. Hao, O. Kazakova, V. Panchal, R. Pearce, and A. Tzalenchuk. "Graphene metrology." In 2014 Conference on Precision Electromagnetic Measurements (CPEM 2014). IEEE, 2014. http://dx.doi.org/10.1109/cpem.2014.6898559.
Skierucha, Wojciech, Marcin Kafarski, Andrzej Wilczek, Agnieszka Szyplowska, Arkadiusz Lewandowski, Justyna Szerement, Aleksandra Woszczyk, and Jacek Majcher. "Soil Aquametry and Electromagnetic Metrology." In 2020 Baltic URSI Symposium (URSI). IEEE, 2020. http://dx.doi.org/10.23919/ursi48707.2020.9254071.
"A- Electromagnetic Metrology [breaker page]." In 2021 Kleinheubach Conference. IEEE, 2021. http://dx.doi.org/10.23919/ieeeconf54431.2021.9598361.
Velt, I., and Yu Mikhailova. "New electromagnetic flowmeters for liquid metal." In 16th International Congress of Metrology, edited by J. R. Filtz, B. Larquier, P. Claudel, and J. O. Favreau. Les Ulis, France: EDP Sciences, 2013. http://dx.doi.org/10.1051/metrology/201302006.
Звіти організацій з теми "Metrology of electromagnetism":
DeWeese, Mary E. Metrology for electromagnetic technology :. Gaithersburg, MD: National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-3921.
Kline, Kathryn E., and Mary E. DeWeese. metrology for electromagnetic technology :. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3029.
Kline, Kathryn E., and Mary E. DeWeese. Metrology for electromagnetic technology :. Gaithersburg, MD: National Bureau of Standards, 1986. http://dx.doi.org/10.6028/nbs.ir.86-3048.
Kline, Kathryn E., and Mary E. DeWeese. Metrology for electromagnetic technology :. Gaithersburg, MD: National Bureau of Standards, 1987. http://dx.doi.org/10.6028/nbs.ir.87-3074.
DeWeese, Mary E. Metrology for electromagnetic technology :. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nbs.ir.88-3097.
DeWeese, Mary E. Metrology for electromagnetic technology :. Gaithersburg, MD: National Institute of Standards and Technology, 1990. http://dx.doi.org/10.6028/nist.ir.3946.
DeWeese, Mary E. Metrology for electromagnetic technology :. Gaithersburg, MD: National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.ir.3972.
DeWeese, Mary E., and Sarabeth Meynihan. Metrology for electromagnetic technology :. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.3994.
Ma, Mark T. Electromagnetic compatibility and interference metrology. Gaithersburg, MD: National Bureau of Standards, 1986. http://dx.doi.org/10.6028/nbs.tn.1099.
Metrology for electromagnetic technology:. Gaithersburg, MD: National Institute of Standards and Technology, 1993. http://dx.doi.org/10.6028/nist.ir.5008.