Добірка наукової літератури з теми "Mechanical pulping process Tasmania"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Mechanical pulping process Tasmania".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Mechanical pulping process Tasmania"
Sandberg, Christer, Jan-Erik Berg, and Per Engstrand. "Process intensification in mechanical pulping." Nordic Pulp & Paper Research Journal 32, no. 4 (December 20, 2017): 615–19. http://dx.doi.org/10.3183/npprj-2017-32-04_p615-622_sandberg.
Повний текст джерелаSandberg, Christer, Jan-Erik Berg, and Per Engstrand. "Process intensification in mechanical pulping - OPEN ACCESS." Nordic Pulp and Paper Research Journal 32, no. 04 (December 2017): 615–22. http://dx.doi.org/10.3183/npprj-2017-32-04-p615-622.
Повний текст джерелаIwasaki, Makoto. "Explosion pulping"Stake-process"." JAPAN TAPPI JOURNAL 44, no. 8 (1990): 856–64. http://dx.doi.org/10.2524/jtappij.44.856.
Повний текст джерелаSandberg, Christer. "Fibre development in an intensified mechanical pulping process." Holzforschung 75, no. 9 (April 13, 2021): 824–37. http://dx.doi.org/10.1515/hf-2020-0242.
Повний текст джерелаSandberg, Christer, Jan-Erik Berg, and Per Engstrand. "Mill evaluation of an intensified mechanical pulping process." Nordic Pulp & Paper Research Journal 32, no. 2 (May 1, 2017): 204–10. http://dx.doi.org/10.3183/npprj-2017-32-02-p204-210.
Повний текст джерелаLee, Chuan Li, Kit Ling Chin, Paik San H’ng, Mohd Sahfani Hafizuddin, and Pui San Khoo. "Valorisation of Underutilized Grass Fibre (Stem) as a Potential Material for Paper Production." Polymers 14, no. 23 (November 29, 2022): 5203. http://dx.doi.org/10.3390/polym14235203.
Повний текст джерелаNakamura, Tetsuji, Hiroshi Tsuchiya, and Takeo Nagasawa. "Research and development of solvolysis pulping. (V). Process engineering for solvolysis pulping." JAPAN TAPPI JOURNAL 44, no. 2 (1990): 235–41. http://dx.doi.org/10.2524/jtappij.44.235.
Повний текст джерелаOpedal, Mihaela Tanase, Per Stenius, and Lars Johansson. "Mechanical Pulping: REVIEW: Colloidal stability and removal of extractives from process water in thermomechanical pulping." Nordic Pulp & Paper Research Journal 26, no. 3 (August 1, 2011): 248–57. http://dx.doi.org/10.3183/npprj-2011-26-03-p248-257.
Повний текст джерелаSandberg, Christer, Jan Hill, and Michael Jackson. "On the development of the refiner mechanical pulping process – a review." Nordic Pulp & Paper Research Journal 35, no. 1 (March 26, 2020): 1–17. http://dx.doi.org/10.1515/npprj-2019-0083.
Повний текст джерелаSuhaimi, Nur Musfirah, Nurul Husna Mohd Hassan, Rushdan Ibrahim, and Latifah Jasmani. "Pulping Yield and Mechanical Properties of Unbeaten Bamboo Paper." Pertanika Journal of Science and Technology 30, no. 2 (March 28, 2022): 1397–408. http://dx.doi.org/10.47836/pjst.30.2.30.
Повний текст джерелаДисертації з теми "Mechanical pulping process Tasmania"
Vena, P. F. "Thermomechanical pulping (TMP), chemithermomechanical pulping (CTMP) and biothermomechanical pulping (BTMP) of bugweed (Solanum mauritianum) and Pinus Patula." Thesis, Link to the online version, 2005. http://hdl.handle.net/10019/1283.
Повний текст джерелаAger, Patrick. "Recycle of complexing reagents during mechanical pulping." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=82813.
Повний текст джерелаThe interaction of aqueous metal•complexes with magnesium metal (Mg°) or bimetallic mixtures of magnesium with either palladium (Pd°/Mg°) or silver (Ag°/Mg°) were optimized to remove metals (Mn, Cu and Fe) from solution with concomitant release of the complexing reagent. The analyte metals were removed by both cementation on the surfaces of the excess Mg° and by precipitation as hydroxides. Overall, the reactions were rapid (3 or 10 min) and very efficient. The accelerators (Ag or Pd) were deposited on the surfaces of the Mg°. In a separate study, the excess of Mg° could be reused to mediate more metals removal without apparent loss of reactivity. Among the other iminodiacetate analogs (CDTA, MEDTA, EGTA, HEDTA, DPTA and MTBE), the EGTA and HEDTA proved to be possible substitutes for both efficient metal removal of Mn, Cu and Fe from solution and efficient release of chelating reagent. The measurement of particle size, performed by laser granulometry, demonstrated that smaller particles of precipitate were generated from metal-EDTA complexes by reaction with NaOH than by reaction with Pd°/Mg° bimetallic mixture. If the suspensions of particles were analyzed in the absence of ultrasound, the particles became aggregated into large flocs (up to 150 mum3 ). The reactivity of the bimetallic mixtures was exploited to remove Cu, Mn, Fe, Zn and Al that had been initially chelated with EDTA or DTPA from a thermomechanical pulp (TMP). After 15 min, the metals had been removed efficiently with the bimetallic mixtures. The EDTA released from the TMP filtrate could be recycled efficiently for a total of three cycles. On the other hand, the DTPA was not released as efficiently. Measurements of turbidity and chemical oxygen demand (COD) indicated no appreciable difference between the pulp samples with either chelating reagent. Residual H2O2 and ISO brightness measurements indicated no apparent differences among pulps that had been treated wi
Behera, Nikhil Chandra. "Topochemistry of delignification and its effect on fiber properties of spruce organosolv pulp." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25561.
Повний текст джерелаForestry, Faculty of
Graduate
Deng, Kailin. "On-line identification of a two-stage thermo-mechanical pulping process." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0026/MQ52388.pdf.
Повний текст джерелаDeng, Kailin Carleton University Dissertation Engineering Mechanical and Aerospace. "On-line identification of a two-stage thermo-mechanical pulping process." Ottawa, 2000.
Знайти повний текст джерелаReme, Philip André. "Some effects of wood characteristics and the pulping process on mechanical pulp fibres." Doctoral thesis, Norwegian University of Science and Technology, Department of Chemical Engineering, 2000. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1774.
Повний текст джерелаThe thesis comprises three parts: Existing methods for characterisation of fibre crosssections have been improved, and new methods have been developed. These methods have then been applied to study the effects of wood characteristics and the pulping process on mechanical pulp fibres. Links have been established between fibre structure and paper properties such as surface smoothness and light scattering coefficient.
New methods, based on SEM-images and image analysis, are described for providing cross-sectional fibre dimensions for large fibre populations, for wood tracheids (app. 60 000 tracheids in a wood trunk) and for processed pulp fibres (app. 1000 fibres per sample). The methods are suited e.g. for evaluation of changes in the fibre cross-sections from wood to the finished paper, or for mapping of fibre parameters within and between growth rings in a wood trunk. The treatment of data is discussed, showing how one may examine the changes in different groups of fibres (earlywood fibres, latewood fibres, split fibres) throughout a process.
It is known from the literature that groundwood-based paper is superior to TMP-based paper with respect to printability. Fibres from SGW and PGW-pulp were found to be much more split in the longitudinal direction than TMP-fibres at comparable freeness. Intact groundwood fibres had thicker walls than intact TMP-fibres, but nevertheless super calendered hand sheets made from groundwood fibres were less roughened by moistening than were TMP-based sheets. Both for groundwood pulps and for TMPpulps, it was shown that reduced fibre wall thickness and increased fibre splitting was beneficial for improved surface smoothness and opacity.
Latewood defibrate easier than earlywood during refining. In the case of grinding, there was no particular preference for earlywood or latewood to be defibrated. Reject refining of groundwood reject was, however, found to be very important for defibration of latewood-containing shives. Pulps made from a raw material with more compact fibres (high wall area to lumen area ratio) were found to defibrate easier, and contain less shives. It was found that refining tends to reduce wall thickness most on thickwalled parts of the fibre, thus causing a reduction of the wall thickness variation around the perimeter.
Earlywood fibres were found to be preferentially split during refining. Most fibre splitting occurs during the primary stage, while the fibres are firmly attached to chips or fibre bundles. Latewood fibre wall thickness decreases considerably more than earlywood fibre wall thickness during refining. It seems that choosing an appropriate raw material is more effective than using excessive energy on reducing the wall thickness of thickwalled fibres. Earlywood fibres became more flattened during refining compared to latewood fibres, possibly due to repeated compressions and relaxations in the refiner.
The energy consumption to a given freeness was found to be considerably larger for Scots Pine than for Norway Spruce. However, the fibre transverse dimensions did not differ much between Norway Spruce and Scots Pine. Pine pulps were far less developed than spruce pulps at similar energy level. A possible explanation for the large energy consumption may be that redistribution of extractives at the fibre surface could reduce friction in the refiner. This hypothesis should be further explored.
The results in this study improve the knowledge of which fibre parameters that matter for surface smoothness and opacity of wood-containing publication paper. Further, this study elucidates how important fibre parameters such as wall thickness and fibre splitting are altered during a refining process. The results may be utilized to identify possible ways of modifying the TMP-process in order to produce paper with improved surface smoothness and opacity.
Opedal, Mihaela Tanase. "Extractives in process water from compressive pre-treatment of chips in mechanical pulping." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for kjemisk prosessteknologi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-16835.
Повний текст джерелаCisneros, Hector A. "Microscopical aspects of hardwood refiner pulps." Thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/30988.
Повний текст джерелаForestry, Faculty of
Graduate
Poirier, Nicole A. "Displacement washing of wood pulp." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=65442.
Повний текст джерелаAndersson, Stefan. "Low consistency refining of mechanical pulp : process conditions and energy efficiency." Licentiate thesis, Mittuniversitetet, Institutionen för naturvetenskap, teknik och matematik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-15406.
Повний текст джерелаКниги з теми "Mechanical pulping process Tasmania"
Carpenter, Charles Halsey. The history of mechanical pulping. [S.l.]: C.H. Carpenter, 1987.
Знайти повний текст джерелаCarpenter, Charles Halsey. The history of mechanical pulping. [Bucksport, Me.]: Tappi Mechanical Pulping Committee, 1987.
Знайти повний текст джерелаLimited, Econotech Services. Laboratory produced CTMP from various blends of aspen, spruce and pine wood furnishes. [Edmonton, Alberta]: Canada Alberta, 1987.
Знайти повний текст джерелаInternational Mechanical Pulping Conference (1999 Houston, Tex.). TAPPI International Mechanical Pulping Conference: May 24-26, 1999, Houston, Texas, The Westin Galleria. Atlanta, GA: TAPPI Press, 1999.
Знайти повний текст джерелаInternational Mechanical Pulping Conference (1991 Minneapolis, Minn.). 1991 International Mechanical Pulping Conference: Hyatt Regency, Minneapolis, MN, June 2-5. Atlanta, GA: TAPPI Press, 1991.
Знайти повний текст джерелаInternational, Mechanical Pulping Conference (1995 Ottawa Ont ). 1995 International Mechanical Pulping Conference: June 12-15, Westin Hotel, Ottawa, Ontario, Canada. [Montreal: Technical Section, CPPA, 1995.
Знайти повний текст джерелаInternational Mechanical Pulping Conference (1987 Vancouver, B.C.). Mechanical pulp, challenging the new frontiers: Hotel Vancouver, Vancouver, British Columbia, Canada, June 2-5, 1987. [Canada: s.n., 1987.
Знайти повний текст джерелаKäyhkö, Jari. The influence of process conditions on the deresination efficiency in mechanical pulp washing. [Lappeenranta]: Lappeenranta University of Technology, 1994.
Знайти повний текст джерелаControl Systems 2000 (2000 Victoria, B.C.). Control Systems 2000: Quantifying the benefits of process control : preprint : May 1-4, 2000, Empress Hotel, Victoria, British Columbia. Montreal: Pulp and Paper Technical Association of Canada, 2000.
Знайти повний текст джерелаWaluszewski, Alexandra. Framväxten av en ny mekanisk massateknik: En utvecklingshistoria. Uppsala: Academiae Ubsaliensis, 1990.
Знайти повний текст джерелаТези доповідей конференцій з теми "Mechanical pulping process Tasmania"
Yong, Zhang, Cao Chunyu, Feng Wenying, and Lv Weijun. "Feasibility of an Energy Saving Membrane Process for the Treatment of Alkaline Peroxide Mechanical Pulping Plants' Effluent." In 2011 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring (CDCIEM). IEEE, 2011. http://dx.doi.org/10.1109/cdciem.2011.139.
Повний текст джерела