Добірка наукової літератури з теми "Manufacturing of Metals"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Manufacturing of Metals".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Manufacturing of Metals"
Wadley, H. N. G. "Cellular Metals Manufacturing." Advanced Engineering Materials 4, no. 10 (October 14, 2002): 726–33. http://dx.doi.org/10.1002/1527-2648(20021014)4:10<726::aid-adem726>3.0.co;2-y.
Повний текст джерелаHerzog, Dirk, Vanessa Seyda, Eric Wycisk, and Claus Emmelmann. "Additive manufacturing of metals." Acta Materialia 117 (September 2016): 371–92. http://dx.doi.org/10.1016/j.actamat.2016.07.019.
Повний текст джерелаTesfaye, Fiseha, Naiyang Ma, and Mingming Zhang. "Cleaner Manufacturing of Critical Metals." JOM 72, no. 2 (January 6, 2020): 764–65. http://dx.doi.org/10.1007/s11837-019-03976-w.
Повний текст джерелаKumar, Sanjay, and Sisa Pityana. "Laser-Based Additive Manufacturing of Metals." Advanced Materials Research 227 (April 2011): 92–95. http://dx.doi.org/10.4028/www.scientific.net/amr.227.92.
Повний текст джерелаOh, Ji-Won, Jinsu Park, and Hanshin Choi. "Multi-step Metals Additive Manufacturing Technologies." Journal of Korean Powder Metallurgy Institute 27, no. 3 (June 30, 2020): 256–67. http://dx.doi.org/10.4150/kpmi.2020.27.3.256.
Повний текст джерелаJadhav, Nisha Ramesh. "Metallic Additive Manufacturing." International Journal for Research in Applied Science and Engineering Technology 10, no. 2 (February 28, 2022): 66–67. http://dx.doi.org/10.22214/ijraset.2022.40188.
Повний текст джерелаSAIDA, Kazuyoshi. "Crystalline Control in Additive Manufacturing of Metals." Journal of Smart Processing 6, no. 3 (2017): 115–18. http://dx.doi.org/10.7791/jspmee.6.115.
Повний текст джерелаSuter, M., E. Weingärtner, and K. Wegener. "MHD printhead for additive manufacturing of metals." Procedia CIRP 2 (2012): 102–6. http://dx.doi.org/10.1016/j.procir.2012.05.049.
Повний текст джерелаFurumoto, Tatsuaki. "Special Issue on Additive Manufacturing with Metals." International Journal of Automation Technology 13, no. 3 (May 5, 2019): 329. http://dx.doi.org/10.20965/ijat.2019.p0329.
Повний текст джерелаLee, Kee-Ahn, Jae-Sung Oh, Young-Min Kong, and Byoung-Kee Kim. "Manufacturing And High Temperature Oxidation Properties Of Electro-Sprayed Fe-24.5% Cr-5%Al Powder Porous Metal." Archives of Metallurgy and Materials 60, no. 2 (June 1, 2015): 1169–73. http://dx.doi.org/10.1515/amm-2015-0091.
Повний текст джерелаДисертації з теми "Manufacturing of Metals"
Orrling, Diana. "Towards Abatement of Selected Emissions from Metals Manufacturing." Doctoral thesis, KTH, Materialens processvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-26107.
Повний текст джерелаQC 20120326
Voisey, Kathleen Theresa O'Sullivan. "Laser drilling of metals and ceramics." Thesis, University of Cambridge, 2002. https://www.repository.cam.ac.uk/handle/1810/272329.
Повний текст джерелаFan, Zongyue. "A Lagrangian Meshfree Simulation Framework for Additive Manufacturing of Metals." Case Western Reserve University School of Graduate Studies / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=case1619737226226133.
Повний текст джерелаShen, Ninggang. "Microstructure prediction of severe plastic deformation manufacturing processes for metals." Diss., University of Iowa, 2018. https://ir.uiowa.edu/etd/6282.
Повний текст джерелаHolt, Linda Ann. "A Cross-Regional Comparison of Fabricated Metals' Manufacturing Sector Resiliency." ScholarWorks, 2015. https://scholarworks.waldenu.edu/dissertations/1704.
Повний текст джерелаJefferson, Bea A. "Clusters and cluster policy : advanced manufacturing and metals industries in South Yorkshire." Thesis, University of Sheffield, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.412792.
Повний текст джерелаBerglund, Lina, Filip Ivarsson, and Marcus Rostmark. "Crucial Parameters for Additive Manufacturing of Metals : A Study in Quality Improvement." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254785.
Повний текст джерелаProduktion genom Additiv Tillverkning möjliggör tillverkande av skräddarsydda produkter i små batcher och med mindre material än vid traditionell tillverkning. Det är ett mer hållbart tillverkningssätt och mer passande för nischprodukter, men innebär nya produktionskrav för att säkerhetsställa bra kvalitet. Målet med denna studie är att definiera de viktigaste parametrarna vid Additiv Tillverkning av produkter i metall och föreslå verktyg för att förbättra dem. Detta genom analys av tidigare studier och utvärdering av klassiska produktionsrutiner för Selective Laser Melting. Resultaten från denna studie visar att porositet och formfel är de vanligaste faktorerna som leder till bristande kvalitet. För att undvika detta är de viktigaste parametrarna att ta i beaktande; parametrar kopplade till "laser freeform fabrication"-system, distans mellan laserstrålar, kraft på lasern, lagertjocklek, skanningsmönster, fart på skanningen och flytbarhet på pulvret. Slutsatsen pekar även på att avgörande parametrar inom Additiv Tillverkning beror på definitionen av kvalitet för en speciell produkt och kan därför variera. Genom kontinuerlig insamling och analys av data kommer förbättringen av kvalitet förenklas markant.
Moseley, Steven Glyn. "The diffusion bonding of ceramics to metals by hot isostatic pressing." Thesis, University of Sheffield, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.364380.
Повний текст джерелаDavis, Trevor. "Formability and strength of sheet metals subjected to complex strain paths." Thesis, Aston University, 1985. http://publications.aston.ac.uk/11872/.
Повний текст джерелаPAKKANEN, JUKKA ANTERO. "Designing for Additive Manufacturing - Product and Process Driven Design for Metals and Polymers." Doctoral thesis, Politecnico di Torino, 2018. http://hdl.handle.net/11583/2714732.
Повний текст джерелаКниги з теми "Manufacturing of Metals"
author, Weheba Gamal S., ed. Manufacturing processes & materials. Dearborn, Michigan: Society of Manufacturing Engineers, 2015.
Знайти повний текст джерелаK, Elshennawy Ahmad, and Doyle Lawrence E, eds. Manufacturing processes & materials. 4th ed. Dearborn, Mich: Society of Manufacturing Engineers, 2000.
Знайти повний текст джерелаMilewski, John O. Additive Manufacturing of Metals. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58205-4.
Повний текст джерелаE, Doyle Lawrence. Manufacturing processes and materials for engineers. 3rd ed. Englewood Cliffs, N.J: Prentice-Hall, 1985.
Знайти повний текст джерелаJ, Bibby M., ed. Principles of metal manufacturing processes. London: Arnold, 1999.
Знайти повний текст джерелаPatel, Janki, ed. Data-Driven Modeling for Additive Manufacturing of Metals. Washington, D.C.: National Academies Press, 2019. http://dx.doi.org/10.17226/25481.
Повний текст джерелаLadani, Leila. Additive manufacturing of metals: Materials, processes, tests, and standards. Lancaster, Pennsylvania: DEStech Publications, Inc, 2020.
Знайти повний текст джерелаNational Heat Transfer Conference (28th 1991 Minneapolis, Minn.). Heat transfer in metals and containerless processing and manufacturing. New York, N.Y: American Society of Mechanical Engineers, 1991.
Знайти повний текст джерелаAssociates, Perrin Quarles, and United States. Environmental Protection Agency., eds. Compliance and enforcement trends in the nonferrous metals smelting sector and at other selected metal manufacturing facilities. [Charlottesville, VA]: Perrin Quarles Associates, Inc., 2000.
Знайти повний текст джерелаAssociates, Perrin Quarles, and United States. Environmental Protection Agency, eds. Compliance and enforcement trends in the nonferrous metals smelting sector and at other selected metal manufacturing facilities. [Charlottesville, VA]: Perrin Quarles Associates, Inc., 2000.
Знайти повний текст джерелаЧастини книг з теми "Manufacturing of Metals"
Youssef, Helmi A., Hassan A. El-Hofy, and Mahmoud H. Ahmed. "Structure of Metals and Alloys." In Manufacturing Technology, 33–56. 2nd ed. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003373209-3.
Повний текст джерелаSaxena, Prateek, Michail Papanikolaou, Emanuele Pagone, Konstantinos Salonitis, and Mark R. Jolly. "Digital Manufacturing for Foundries 4.0." In Light Metals 2020, 1019–25. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36408-3_138.
Повний текст джерелаYoussef, Helmi A., Hassan A. El-Hofy, and Mahmoud H. Ahmed. "Heat Treatment of Metals and Alloys." In Manufacturing Technology, 91–127. 2nd ed. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003373209-5.
Повний текст джерелаBernhard, Robert, Philipp Neef, Henning Wiche, Volker Wesling, Christian Hoff, Jörg Hermsdorf, and Stefan Kaierle. "Laser Cladding – Additive Manufacturing." In Laser Cladding of Metals, 1–8. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53195-9_1.
Повний текст джерелаQingcai, Zhao, Zhao Jingli, Miao Xingli, and Wang Lihai. "Energy Saving Technologies for Anode Manufacturing." In Light Metals 2012, 1201–4. Cham: Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48179-1_207.
Повний текст джерелаQingcai, Zhao, Zhao Jingli, Miao Xingli, and Wang Lihai. "Energy Saving Technologies for Anode Manufacturing." In Light Metals 2012, 1201–4. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118359259.ch207.
Повний текст джерелаSalandro, Wesley A., Joshua J. Jones, Cristina Bunget, Laine Mears, and John T. Roth. "Deformation of Metals." In Springer Series in Advanced Manufacturing, 1–21. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08879-2_1.
Повний текст джерелаTsumori, Fujio. "Laser Processing for Metals." In Multi-dimensional Additive Manufacturing, 27–33. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7910-3_2.
Повний текст джерелаMilewski, John O. "Understanding Metal for Additive Manufacturing." In Additive Manufacturing of Metals, 49–83. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58205-4_4.
Повний текст джерелаCui, Di, Briac Lanfant, Marc Leparoux, and Sébastian Favre. "Additive Manufacturing of Ti-Nb Dissimilar Metals by Laser Metal Deposition." In Industrializing Additive Manufacturing, 96–111. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-54334-1_8.
Повний текст джерелаТези доповідей конференцій з теми "Manufacturing of Metals"
Kim, Sara E., Christoph O. Steinbruchel, Atul Kumar, and H. Bakhru. "Control of the interaction of metals with fluorinated silicon oxides." In Microelectronic Manufacturing, edited by Mart Graef and Divyesh N. Patel. SPIE, 1998. http://dx.doi.org/10.1117/12.324045.
Повний текст джерелаFranklin, Reynold, and Udaya B. Halabe. "Knowledge-based assistant for ultrasonic inspection in metals." In Intelligent Systems & Advanced Manufacturing, edited by Bhaskaran Gopalakrishnan, San Murugesan, Odo Struger, and Gerfried Zeichen. SPIE, 1997. http://dx.doi.org/10.1117/12.294438.
Повний текст джерелаTessmann, Bryce, Kewei Li, and Xin Zhao. "Bidirectional Bending of Thin Metals With Femtosecond Lasers." In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-85222.
Повний текст джерелаSchniedenharn, Maximilian, Matthias Belting, Rui João Santos Batista, Wilhelm Meiners, and Andreas Weisheit. "Micro scale laser based additive manufacturing for metals." In ICALEO® 2013: 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2013. http://dx.doi.org/10.2351/1.5062946.
Повний текст джерелаWagner, Scott W., Kenny Ng, William J. Emblom, and Jaime A. Camelio. "Influence of Continuous Direct Current on the Micro Tube Hydroforming Process." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50257.
Повний текст джерелаJoong-Pyo Shim, Hong-Ki Lee, and Ju-Seong Lee. "The synthrsis of potassium hexatitanate and manufacturing alkaline fuel cell matrix." In International Conference on Science and Technology of Synthetic Metals. IEEE, 1994. http://dx.doi.org/10.1109/stsm.1994.836101.
Повний текст джерелаShacham-Diam, Yosi Y., Boris Yokhin, Itzhak Mazor, Avishai Kepten, Roey Shaviv, and Ayelet Gabai. "In-line x-ray fluorescence metrology of metals and ultrathin barrier layers for ULSI applications." In Microelectronic Manufacturing, edited by Sergio A. Ajuria and Tim Z. Hossain. SPIE, 1998. http://dx.doi.org/10.1117/12.324424.
Повний текст джерелаStofesky, David B. "Manufacturing With MicroECM." In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21119.
Повний текст джерелаUdupa, Anirudh, Tatsuya Sugihara, and James B. Mann. "Glues Make Gummy Metals Easy to Cut." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2922.
Повний текст джерелаKulkarni, N. A., R. S. Mahajan, N. V. Karanth, K. V. Phani Prabhakar, and G. Padmanabham. "Development of CAE Methodology for Joining of Dissimilar Metals Using Cold Metal Transfer and Its Validation." In International Conference on Automotive Materials & Manufacturing 2014. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2014. http://dx.doi.org/10.4271/2014-28-0017.
Повний текст джерелаЗвіти організацій з теми "Manufacturing of Metals"
Burke, Stephen. Advanced Data Preparation Module for Metals Additive Manufacturing. Office of Scientific and Technical Information (OSTI), October 2020. http://dx.doi.org/10.2172/1673836.
Повний текст джерелаScott, Elizabeth. Innovations in Advanced Materials and Metals Manufacturing Project (IAM2). Office of Scientific and Technical Information (OSTI), January 2017. http://dx.doi.org/10.2172/1369257.
Повний текст джерелаBabu, Sudarsanam Suresh, Lonnie J. Love, William H. Peter, and Ryan Dehoff. Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System. Office of Scientific and Technical Information (OSTI), May 2016. http://dx.doi.org/10.2172/1325459.
Повний текст джерелаDehoff, Ryan R., and Michael M. Kirka. Additive Manufacturing of Porous Metal. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1362246.
Повний текст джерелаMoran, Angela L., and Dawn R. White. Intelligent Processing for Spray Metal Manufacturing. Fort Belvoir, VA: Defense Technical Information Center, June 1990. http://dx.doi.org/10.21236/ada226499.
Повний текст джерелаSlattery, Kevin, and Eliana Fu. Unsettled Issues in Additive Manufacturing and Improved Sustainability in the Mobility Industry. SAE International, July 2021. http://dx.doi.org/10.4271/epr2021015.
Повний текст джерелаKim, Felix H., and Shawn P. Moylan. Literature review of metal additive manufacturing defects. Gaithersburg, MD: National Institute of Standards and Technology, May 2018. http://dx.doi.org/10.6028/nist.ams.100-16.
Повний текст джерелаLove, Lonnie J., Andrzej Nycz, and Mark W. Noakes. Large Scale Metal Additive Manufacturing with Wolf Robotics. Office of Scientific and Technical Information (OSTI), July 2018. http://dx.doi.org/10.2172/1465067.
Повний текст джерелаNycz, Andrzej, Mark Noakes, Luke Meyer, Chris Masuo, Derek Vaughan, Lonnie Love, and Mike Walker. Large Scale Metal Additive Manufacturing for Stamping Dies. Office of Scientific and Technical Information (OSTI), August 2022. http://dx.doi.org/10.2172/1883756.
Повний текст джерелаKnapp, Cameron M. Los Alamos National Laboratory’s Approach to Metal Additive Manufacturing. Office of Scientific and Technical Information (OSTI), March 2016. http://dx.doi.org/10.2172/1242923.
Повний текст джерела