Добірка наукової літератури з теми "In situ ceramic composite"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "In situ ceramic composite".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "In situ ceramic composite"
Zhang, Guo Jun, Hideki Kita, Naoki Kondo, and Tatsuki Ohji. "Strengthening Effect of In-Situ Dispersed Hexagonal Boron Nitride in Ceramic Composites." Key Engineering Materials 317-318 (August 2006): 163–66. http://dx.doi.org/10.4028/www.scientific.net/kem.317-318.163.
Повний текст джерелаZhao, Zhong Min, Long Zhang, Hong Bai Bai, Jian Zheng, Jian Jiang Wang, and Y. Fu. "Fabrication of Nano-Micron Al2O3-ZrO2 Ceramic Eutectic Composites from the Melts by the SHS Metallurgical Process." Key Engineering Materials 280-283 (February 2007): 1053–56. http://dx.doi.org/10.4028/www.scientific.net/kem.280-283.1053.
Повний текст джерелаLiu, Bing Qiang, Chuan Zhen Huang, Han Lian Liu, and Xue Wen Chong. "Development of Whisker Toughening Ceramic Cutting Tool Composite by In Situ Synthesis Technology." Key Engineering Materials 431-432 (March 2010): 201–4. http://dx.doi.org/10.4028/www.scientific.net/kem.431-432.201.
Повний текст джерелаRamírez, Cristina, Pilar Miranzo, Maria Isabel Osendi, and Manuel Belmonte. "In Situ Graded Ceramic/Reduced Graphene Oxide Composites Manufactured by Spark Plasma Sintering." Ceramics 4, no. 1 (December 29, 2020): 12–19. http://dx.doi.org/10.3390/ceramics4010002.
Повний текст джерелаLiao, Zhongquan, Yvonne Standke, Jürgen Gluch, Katalin Balázsi, Onkar Pathak, Sören Höhn, Mathias Herrmann, et al. "Microstructure and Fracture Mechanism Investigation of Porous Silicon Nitride–Zirconia–Graphene Composite Using Multi-Scale and In-Situ Microscopy." Nanomaterials 11, no. 2 (January 22, 2021): 285. http://dx.doi.org/10.3390/nano11020285.
Повний текст джерелаWang, Ying Chun, Jian Guo Li, and Yaohe Zhou. "Research on the In Situ Fabrication of Bioceramic Composite Coatings by Laser Cladding." Key Engineering Materials 330-332 (February 2007): 625–28. http://dx.doi.org/10.4028/www.scientific.net/kem.330-332.625.
Повний текст джерелаRiedel, Ralf. "Novel Method Produces Dense In Situ Ceramic Composite." Materials and Processing Report 3, no. 9 (December 1988): 2–3. http://dx.doi.org/10.1080/08871949.1988.11752214.
Повний текст джерелаEhrenfried, Lisa M., David Farrar, David Morsley та Ruth Cameron. "Mechanical Behaviour of Interpenetrating Co-Continuous β-TCP-PDLLA Composites". Key Engineering Materials 361-363 (листопад 2007): 407–10. http://dx.doi.org/10.4028/www.scientific.net/kem.361-363.407.
Повний текст джерелаHuang, Kai Jin. "Synthesis of Al2O3/AlB12/Al Composite Ceramic Powders by Pulsed Nd:YAG Laser Igniting Method and a Study of their Mechanical Properties." Applied Mechanics and Materials 26-28 (June 2010): 919–24. http://dx.doi.org/10.4028/www.scientific.net/amm.26-28.919.
Повний текст джерелаHuang, Kai Jin, Li Yan, Hua Min Kou, and Chang Sheng Xie. "Synthesis of Al2O3/AlB12/Al Composite Ceramic Powders by a New Laser-Induction Complex Heating Method and a Study of their Mechanical Properties." Applied Mechanics and Materials 29-32 (August 2010): 596–601. http://dx.doi.org/10.4028/www.scientific.net/amm.29-32.596.
Повний текст джерелаДисертації з теми "In situ ceramic composite"
Mariappan, L. "In-Situ Synthesis Of A12O3_ZrO2_SiCw Ceramic Matrix Composites By Carbothermal Reduction Of Natural Silicates." Thesis, Indian Institute of Science, 2000. http://hdl.handle.net/2005/215.
Повний текст джерелаAramide, FO, KK Alaneme, PA Olubambi, and JO Borode. "In-Situ Synthesis of Mullite Fibers Reinforced Zircon-Zirconia Refractory Ceramic Composite from Clay Based Materials." International Journal of Materials and Chemistry, 2015. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1001844.
Повний текст джерелаRabih, Ali. "Élaboration et caractérisation de nanocomposites alumine - zircone à partir de poudres cosynthetisées par voie hydrothermale." Valenciennes, 1997. https://ged.uphf.fr/nuxeo/site/esupversions/337cf2fd-5f79-4072-932a-6fe51f860b1a.
Повний текст джерелаGuel, Nicolas. "Comportement mécanique de composites oxydes : Relations procédé-microstructure-propriétés." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEI104/document.
Повний текст джерелаThe aim of this thesis is the fine understanding on the influence of the microstructure on oxide-based ceramic matrix composites mechanical properties. These materials are good candidate for new generation of civil aircraft engines. The aim of this work is to establish a relationship between the microstructural defects generated by the manufacturing process and the mechanical behavior of the composite. These heterogeneities seem to influence the appearance and the propagation of damage mechanisms. This study is realized on three kinds of bi-dimensional oxide composites generated from three different manufacturing processes. These processes create three kinds of microstructure. Porosimetric and μ-tomographic analyses allow estimating the distribution of microstructural defects and establish typical microstructure of each oxide composite. Based on these preliminary analyses, mechanical behavior of each kind of oxide composites is studied through several representative scales. On the one hand, mechanical tensile tests are carried out in order to estimate the mechanical properties of the studied materials in the weaving plane. On the other hand, the implementation of in-situ mechanical tests allows the visualization of damage mechanisms appearance and propagation. These observations improve the understanding of the role of microstructural defects on the activation of damage mechanisms. Damage kinetics of each mechanical test are inspected through AE (Acoustic emission) analysis. This monitoring helps to link mechanical behavior with microstructural damage. In parallel with global AE analysis, AE clustering is achieved. These classifications are based on two kinds of AE sensor with different properties. Data fusion from the two sensors is accomplished. This technique allows more robust AE clustering. Cluster labelling is proposed thanks to damage mechanisms observed during in-situ mechanical tests. Damage scenarios are set up owing to macroscopic mechanical test, in-situ analysis and AE labelling. Thus, it is possible to establish the influence of each kind of microstructural defect on oxide-based CMCs mechanical behavior
Liu, JingJing. "Carbon nanotubes developed on ceramic constituents through chemical vapour deposition." Thesis, Loughborough University, 2012. https://dspace.lboro.ac.uk/2134/9967.
Повний текст джерелаO'Sullivan, David. "Élaboration et caractérisation mécanique des nanocomposites alumine-carbure de silicium." Valenciennes, 1998. https://ged.uphf.fr/nuxeo/site/esupversions/fa8074c9-3bc2-47e1-a75e-41fa9c276467.
Повний текст джерелаPoorteman, Marc. "Fabrication et caractérisation de composites céramiques renforcés par des plaquettes." Valenciennes, 1997. https://ged.uphf.fr/nuxeo/site/esupversions/078152fe-6c38-4759-a136-3513bbe27089.
Повний текст джерелаSapardanis, Hélène. "Fissuration à l’interface d’un revêtement plasma céramique et d’un substrat métallique sous sollicitations dynamique et quasi-statique multiaxiales." Thesis, Paris Sciences et Lettres (ComUE), 2016. http://www.theses.fr/2016PSLEM033/document.
Повний текст джерелаThe work presented in this manuscript aims to investigate the growth of an interfacial flaw, whose geometry is known, under macroscopic shear loading. An experimental methodology is thus developed in which i) a ceramic/metal coated system with controlled interface roughness is processed, ii) an interfacial flaw is introduced using the laser shock technique, iii) a macroscopic shear loading is applied on the coated system using a biaxial in-plane testing device and iv) interfacial crack growth and buckling are measured in situ. Hence, both dynamic and quasi-static loadings are applied on the coated system by respectively the laser shock technique and biaxial testing. The interface roughness, which affects the crack growth, is also considered in the study. A pure alumina coating is deposited by air plasma spraying on a metallic substrate, polycrystalline cobalt base superalloy Haynes 188 and stainless steel 304L substrates, with no bond coat.First, the flaw resulting from the propagation of a laser shock wave has been analyzed according to the laser parameters and the interface roughness. An interfacial flaw is characterized by a circular delamination with a diameter of a few millimeters and a circular blister with a height of a few tens of micrometers. These characteristic dimensions have been measured thanks to non destructive techniques: 3D profilometry and image analysis based on optical observations and infrared thermography. A finite element analysis has been carried out to investigate the crack behavior under laser shock wave propagation using a cohesive contact to account for the interface behavior.The interfacial flaw growth under macroscopic shear loading has been characterized with optical observations and the digital image stereo-correlation technique. The related finite element analysis enabled to identify the local loading along the crack front and gave a first explanation about the shapes of the delaminated area observed experimentally. This analysis relies on a cohesive zone model whose applied boundary conditions are established from the displacements measured by digital image correlation technique. By this way, the delamination growth was revealed to be mostly driven by local shear (mode II and III) and the crack opening (mode I), induced by the buckling of the deposited layer and the macroscopic shear, makes the delamination growth easier. Finally, the influence of the macroscopic shear loading on the interfacial delamination has been studied from three different macroscopic shear loadings. The finite element analysis based on linear elastic fracture mechanics in a homogenous material has allowed to study the influence of the macroscopic shear loading on the local loading along the crack front
Hassanin, Hany Salama Sayed Ali. "Fabrication of ceramic and ceramic composite microcomponents using soft lithography." Thesis, University of Birmingham, 2011. http://etheses.bham.ac.uk//id/eprint/1538/.
Повний текст джерелаMcDermott, A. "In-situ coagulation moulding of ceramic suspensions." Thesis, University of Nottingham, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287181.
Повний текст джерелаКниги з теми "In situ ceramic composite"
National Workshop on Metal, Ceramic and Composite Powders (5th : 1989 : Bombay, India). Metal, ceramic and composite powders. Edited by Ramakrishnan P and Indian Institute of Technology, Bombay. New Delhi: Oxford & IBH, 1990.
Знайти повний текст джерелаHull, David R. Plasma etching a ceramic composite. [Washington, DC]: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаR, Warren, ed. Ceramic-matrix composites. London: Blackie, 1992.
Знайти повний текст джерелаCorrosion of Ceramic and Composite Materials. 2nd ed. Abingdon: CRC Press [Imprint], 2004.
Знайти повний текст джерелаMcCauley, Ronald A. Corrosion of ceramic and composite materials. 2nd ed. New York: Marcel Dekker Inc., 2004.
Знайти повний текст джерелаMcClure, Amy Evans. Amy Evans McClure: In space in situ. Oakland, CA: O Books, 2009.
Знайти повний текст джерелаCeramic matrix composites. 2nd ed. Boston: Kluwer Academic, 2003.
Знайти повний текст джерелаCeramic matrix composites. London: Chapman & Hall, 1993.
Знайти повний текст джерелаI, Trefilov V., ed. Ceramic- and carbon-matrix composites. London: Chapman & Hall, 1995.
Знайти повний текст джерелаR, Shan Ashwin, and Lewis Research Center, eds. Probabilistic modeling of ceramic matrix composite strength. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.
Знайти повний текст джерелаЧастини книг з теми "In situ ceramic composite"
Pei, Bingbing, Yunzhou Zhu, and Zhengren Huang. "Temperature Effect on C/SiC Composite with SiC Nanowires Grown in Situ." In Ceramic Transactions Series, 403–7. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118932995.ch43.
Повний текст джерелаChen, Zhong-Chun, Toshihiko Okazawa, and Keisuke Ikeda. "In-Situ Synthesis of Oxide/Oxide Composites." In Ceramic Transactions Series, 11–21. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118144091.ch2.
Повний текст джерелаFernandez, Claudia P., Ruth H. G. A. Kiminami, Fabio Luiz Zabotto, and Ducinei Garcia. "Microstructure and Magnetoelectric Properties of Microwave Sintered CoFe2O4-PZT Particulate Composite Synthesized in Situ." In Ceramic Transactions Series, 279–91. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118995433.ch27.
Повний текст джерелаZhang, G. J., T. Ohji, S. Kanzaki, and J. F. Yang. "In Situ Synthesis of Nonoxide-Boron Nitride (Nobn) Composites." In Ceramic Transactions Series, 83–91. 735 Ceramic Place, Westerville, Ohio 43081: The American Ceramic Society, 2012. http://dx.doi.org/10.1002/9781118370872.ch7.
Повний текст джерелаZhang, G. J., T. Ohji, S. Kanzaki, and J. F. Yang. "Characterization of in situ Nonoxide-Boron Nitride (Nobn) Composites." In Ceramic Transactions Series, 115–23. 735 Ceramic Place, Westerville, Ohio 43081: The American Ceramic Society, 2012. http://dx.doi.org/10.1002/9781118380925.ch9.
Повний текст джерелаDassios, K., C. Galiotis, V. Kostopoulos, and M. Steen. "In Situ Assessment of the Micromechanics of Large Scale Bridging in Ceramic Composites." In Recent Advances in Composite Materials, 71–79. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-2852-2_7.
Повний текст джерелаGu, Wei, Jian Yang, and Tai Qiu. "In-Situ Synthesys and Properties of TiB2 /Ti3 SiC2 Composites." In Ceramic Transactions Series, 429–35. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470640845.ch62.
Повний текст джерелаSatapathy, L. N., P. D. Ramesh, Dinesh Agrawal, and Rustum Roy. "In-Situ Synthesis and Characterization of SiC - Al2 O3 Composites." In Ceramic Transactions Series, 135–46. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118408391.ch13.
Повний текст джерелаShuquan, Liang, Zhong Jie, Zhang Guowei, and Tan Xiaoping. "Nano-Zirconia/Mullite Composite Ceramics Prepared by In-Situ Controlled Crystallization from the Si-Al-Zr-O Amorphous Bulk." In Ceramic Transactions Series, 99–108. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470640845.ch14.
Повний текст джерелаPaderno, Yu B. "A New Class of “In-Situ” Fiber Reinforced Boride Composite Ceramic Materials." In Advanced Multilayered and Fibre-Reinforced Composites, 353–69. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-007-0868-6_23.
Повний текст джерелаТези доповідей конференцій з теми "In situ ceramic composite"
Kim, Ran Y., and G. P. Tandon. "In Situ Observation and Modeling of Damage Modes in Cross-Ply Ceramic Matrix Composites." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0699.
Повний текст джерелаBaskey, H. B., Devendra Kumar, T. C. Shami, R. Kumar, S. Kumar, A. K. Dixit, and N. Eswara Prasad. "In-situ high-temperature electromagnetic characterization of ceramic composite tiles for strategic applications." In 2016 11th International Conference on Industrial and Information Systems (ICIIS). IEEE, 2016. http://dx.doi.org/10.1109/iciinfs.2016.8262955.
Повний текст джерелаUlianitsky, V. Yu, D. V. Dudina, I. S. Batraev, N. V. Bulina, A. I. Kovalenko, M. A. Korchagin, and B. B. Bokhonov. "In situ formation of metal-ceramic composite coatings by detonation spraying of titanium." In INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4899028.
Повний текст джерелаSingh, Yogesh P., Michael J. Presby, Kannan Manigandan, and Gregory N. Morscher. "Multi-Lead Direct Current Potential Drop (DCPD) for In-Situ Health Monitoring of Ceramic Matrix Composites." In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-75803.
Повний текст джерелаHernandez, Johnathan, Quentin Fouliard, Caroline Anderson, Matthew Northam, Khanh Vo, Jared Clabaugh, Douglas Wolfe, et al. "In-Situ XRD Characterization of Interface Strains In Multilayered Ceramic Composite Systems for Hypersonics Applications." In 23rd AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2020. http://dx.doi.org/10.2514/6.2020-2421.
Повний текст джерелаGiurgiutiu, Victor, and Bin Lin. "In-Situ Fabrication of Composite Piezoelectric Wafer Active Sensors for Structural Health Monitoring." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60929.
Повний текст джерелаChulya, Abhisak, John P. Gyekenyesi, and Ramakrishna T. Bhatt. "Mechanical Behavior of Fiber Reinforced SiC/RBSN Ceramic Matrix Composites: Theory and Experiment." In ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/91-gt-209.
Повний текст джерела"Dry Sliding Wear Behaviour of Al-Based Composite Prepared with Novel In-Situ Ceramic Composite Developed from Colliery Waste Using Taguchi Method." In 2nd International Conference on Research in Science, Engineering and Technology. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/iie.e0314549.
Повний текст джерелаAgrawal, Parul, and C. T. Sun. "Crack Growth in Metal-Ceramic Composites." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2156.
Повний текст джерелаSzweda, Andy, Steve Butner, John Ruffoni, Carlos Bacalski, Jay Lane, Jay Morrison, Gary Merrill, et al. "Development and Evaluation of Hybrid Oxide/Oxide Ceramic Matrix Composite Combustor Liners." In ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68496.
Повний текст джерелаЗвіти організацій з теми "In situ ceramic composite"
Savrun, Ender, and Cetin Toy. High Strength, High Toughness in Situ Ceramic Composites. Fort Belvoir, VA: Defense Technical Information Center, November 1995. http://dx.doi.org/10.21236/ada300976.
Повний текст джерелаZhang, XI-Cheng, David Hurley, and Albert Redo-Scanchez. Non Destructive Thermal Analysis and In Situ Investigation of Creep Mechanism of Graphite and Ceramic Composites using Phase-sensitive THz Imaging & Nonlinear Resonant Ultrasonic Spectroscopy. Office of Scientific and Technical Information (OSTI), November 2012. http://dx.doi.org/10.2172/1056847.
Повний текст джерелаSayir, Ali. Directionally Solidified Eutectic Ceramics; In-Situ Composites for High Temperature Structural Applications. Fort Belvoir, VA: Defense Technical Information Center, February 2004. http://dx.doi.org/10.21236/ada421689.
Повний текст джерелаCase, S. W., H. G. Halverson, R. H. Carter, M. Wone, and K. L. Reifsnider. Properties and Performance of Ceramic Composite Components. Office of Scientific and Technical Information (OSTI), August 1999. http://dx.doi.org/10.2172/9749.
Повний текст джерелаJudkins, R. R., D. P. Stinton, R. G. Smith, E. M. Fischer, J. H. Eaton, B. L. Weaver, J. L. Kahnke, and D. J. Pysher. Development of ceramic composite hot-gas filters. Office of Scientific and Technical Information (OSTI), April 1995. http://dx.doi.org/10.2172/52754.
Повний текст джерелаLott, L. A., D. C. Kunerth, and J. B. Walter. Nondestructive evaluation of advanced ceramic composite materials. Office of Scientific and Technical Information (OSTI), September 1991. http://dx.doi.org/10.2172/6270236.
Повний текст джерелаCarter, R. H. Properties and Performance of Ceramic Composite Components. Office of Scientific and Technical Information (OSTI), January 2001. http://dx.doi.org/10.2172/773302.
Повний текст джерелаR. Suplinskas G. DiBona and W. Grant. Continuous Fiber Ceramic Composite (CFCC) Program: Gaseous Nitridation. Office of Scientific and Technical Information (OSTI), October 2001. http://dx.doi.org/10.2172/791414.
Повний текст джерелаHolloran, John W. Composite Ceramic Superconducting Wires for Electric Motor Applications. Fort Belvoir, VA: Defense Technical Information Center, July 1989. http://dx.doi.org/10.21236/ada210345.
Повний текст джерелаParish, Mark V. Composite Ceramic Superconducting Wires for Electric Motor Applications. Fort Belvoir, VA: Defense Technical Information Center, December 1990. http://dx.doi.org/10.21236/ada232074.
Повний текст джерела