Добірка наукової літератури з теми "Hybrid metal matrix composites"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Hybrid metal matrix composites".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Hybrid metal matrix composites"
L, Bangarappa, Charan B.M, Vinya Kumar G.V, Deep N.L, and Koushik Vattikutti. "Aluminium hybrid metal matrix composites." International Journal of Engineering Trends and Technology 48, no. 6 (June 25, 2017): 309–15. http://dx.doi.org/10.14445/22315381/ijett-v48p255.
Повний текст джерелаBodukuri, Anil Kumar, Kesha Eswaraiah, and V. Pradeep. "Investigation on Machining of Hybrid Metal Matrix Composite." Materials Science Forum 969 (August 2019): 846–51. http://dx.doi.org/10.4028/www.scientific.net/msf.969.846.
Повний текст джерелаKathirvel, M., and K. Palanikumar. "Effect of Volume Fraction on Surface Roughness in Turning of Hybrid Metal Matrix (A6061 A1+SiC+Graphite) Composites." Applied Mechanics and Materials 766-767 (June 2015): 263–68. http://dx.doi.org/10.4028/www.scientific.net/amm.766-767.263.
Повний текст джерелаThyla, P. R., N. Tiruvenkadam, and M. Senthil Kumar. "Effect of Environmental Conditions for New Hybrid Aluminium Metal Matrix Composites Wear." Journal of Advances in Mechanical Engineering and Science 1, no. 2 (October 8, 2015): 1–8. http://dx.doi.org/10.18831/james.in/2015021001.
Повний текст джерелаKonopka, Katarzyna. "Particle-Reinforced Ceramic Matrix Composites—Selected Examples." Journal of Composites Science 6, no. 6 (June 19, 2022): 178. http://dx.doi.org/10.3390/jcs6060178.
Повний текст джерелаSingh, Mandeep, Harish Kumar Garg, Sthitapragyan Maharana, Appusamy Muniappan, M. K. Loganathan, Tien V. T. Nguyen, and V. Vijayan. "Design and Analysis of an Automobile Disc Brake Rotor by Using Hybrid Aluminium Metal Matrix Composite for High Reliability." Journal of Composites Science 7, no. 6 (June 12, 2023): 244. http://dx.doi.org/10.3390/jcs7060244.
Повний текст джерелаGupta, Pankaj K., and MK Gupta. "Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234, no. 12 (August 5, 2020): 1503–14. http://dx.doi.org/10.1177/1464420720942554.
Повний текст джерелаUmanath, K., S. T. Selvamani, K. Palanikumar, and Ram G. Dinesh. "Worn Surface Analysis of Hybrid Metal Matrix Composite." Advanced Materials Research 984-985 (July 2014): 546–50. http://dx.doi.org/10.4028/www.scientific.net/amr.984-985.546.
Повний текст джерелаSaravanan, G., K. Shanmugasundaram, M. Prakash, and A. Velayudham. "Tribological Behaviour of Hybrid (Al356 + SiC + Gr) Metal Matrix Composites." Applied Mechanics and Materials 766-767 (June 2015): 269–75. http://dx.doi.org/10.4028/www.scientific.net/amm.766-767.269.
Повний текст джерелаKumar, Deepak, Pardeep Saini, and Pradeep Kumar Singh. "A study on Morphological and Mechanical Characterization of Al-4032/SiC/GP Hybrid Composites." Metallurgical and Materials Engineering 28, no. 1 (March 31, 2022): 33–45. http://dx.doi.org/10.30544/728.
Повний текст джерелаДисертації з теми "Hybrid metal matrix composites"
Dibelka, Jessica Anne. "Mechanics of Hybrid Metal Matrix Composites." Diss., Virginia Tech, 2013. http://hdl.handle.net/10919/50579.
Повний текст джерелаPh. D.
Muley, Aniruddha Vinayak. "Fabrication, characterization and tribological studies on aluminum based hybrid metal matrix composites." Thesis, IIT Delhi, 2016. http://localhost:8080/xmlui/handle/12345678/7090.
Повний текст джерелаNestler, Daisy Julia. "Beitrag zum Thema VERBUNDWERKSTOFFE - WERKSTOFFVERBUNDE." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-134459.
Повний текст джерелаComplex property profiles require increasingly advanced composite materials and material compounds, including the rapid deployment of new production technologies, because the monolithic material or a single material can no longer satisfy today's complex requirements. Future material systems are fundamentally important to growth markets, in which they have an economically key position. Tailor-made lightweight materials (tailor-made composites) with an adapted design are needed. These concepts have to be developed to design the optimum combination of components. This requires material-specific knowledge and the ability to make correlations, as well as the design of complex technologies. Continuous large-scale and mass production (in-line, in-situ), thus reducing the costs of previously expensive composite materials and material compounds, is also necessary. The present work spans the entire field of composite materials and material compounds in a comparable and comparative manner and abstract form. A summarizing publication on this still very new, but already broad-based scientific field is not yet available. The separation of the individual, firmly divided groups of the composite materials is the reason for this. Cross-connections are rarely made. The objective of this work is to compensate to some extent for this deficiency. Special consideration is given to definitions and classifications, manufacturing processes and the properties of the materials. Clear structures and overviews are presented. Mapping established and new technologies will contribute to the stability of the terms "mixed material compounds" and "hybrid material compounds". In addition, the problem of recycling and recycling technologies is discussed. In summary, areas for future research and development projects will be specified. Generalized concepts for tailor-made composite materials and material compounds are proposed ("adjusting screw scheme") with an eye toward various production routes, especially for semi-finished products and components, and the associated findings. These general material concepts are applied to own current research projects pertaining to metal-matrix and polymer-matrix composites and hybrid material compounds. Research fields for future projects are extrapolated. Particular attention is paid to hybrid material compounds as the mainstay of future developments in lightweight construction. In-line and in-situ processes play a key role for large-scale, cost- and resource-efficient production
Nestler, Daisy Julia. "Beitrag zum Thema VERBUNDWERKSTOFFE - WERKSTOFFVERBUNDE: Status quo und Forschungsansätze." Doctoral thesis, Universitätsverlag Chemnitz, 2012. https://monarch.qucosa.de/id/qucosa%3A20009.
Повний текст джерелаComplex property profiles require increasingly advanced composite materials and material compounds, including the rapid deployment of new production technologies, because the monolithic material or a single material can no longer satisfy today's complex requirements. Future material systems are fundamentally important to growth markets, in which they have an economically key position. Tailor-made lightweight materials (tailor-made composites) with an adapted design are needed. These concepts have to be developed to design the optimum combination of components. This requires material-specific knowledge and the ability to make correlations, as well as the design of complex technologies. Continuous large-scale and mass production (in-line, in-situ), thus reducing the costs of previously expensive composite materials and material compounds, is also necessary. The present work spans the entire field of composite materials and material compounds in a comparable and comparative manner and abstract form. A summarizing publication on this still very new, but already broad-based scientific field is not yet available. The separation of the individual, firmly divided groups of the composite materials is the reason for this. Cross-connections are rarely made. The objective of this work is to compensate to some extent for this deficiency. Special consideration is given to definitions and classifications, manufacturing processes and the properties of the materials. Clear structures and overviews are presented. Mapping established and new technologies will contribute to the stability of the terms "mixed material compounds" and "hybrid material compounds". In addition, the problem of recycling and recycling technologies is discussed. In summary, areas for future research and development projects will be specified. Generalized concepts for tailor-made composite materials and material compounds are proposed ("adjusting screw scheme") with an eye toward various production routes, especially for semi-finished products and components, and the associated findings. These general material concepts are applied to own current research projects pertaining to metal-matrix and polymer-matrix composites and hybrid material compounds. Research fields for future projects are extrapolated. Particular attention is paid to hybrid material compounds as the mainstay of future developments in lightweight construction. In-line and in-situ processes play a key role for large-scale, cost- and resource-efficient production.
Ling, Paul Keh Yiing. "Creep of metal matrix composites." Thesis, University of Nottingham, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240496.
Повний текст джерелаEl-Gallab, Mariam S. "Machining of particulate metal matrix composites." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0030/NQ66206.pdf.
Повний текст джерелаMurphy, Angela Mary. "Clustering in particulate metal matrix composites." Thesis, University of Cambridge, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242540.
Повний текст джерелаWildan, Muhammad W. "Zirconia-matrix composites reinforced with metal." Thesis, University of Strathclyde, 2000. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21428.
Повний текст джерелаMohammadi-Aghdam, Mohammad. "Micromechanics of unidirectional metal matrix composites." Thesis, University of Bristol, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.297843.
Повний текст джерелаWang, Aiguo. "Abrasive wear of metal matrix composites." Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.305516.
Повний текст джерелаКниги з теми "Hybrid metal matrix composites"
H, Taylor Allan, Sakata I. Frank, and Dryden Flight Research Facility, eds. A comparison of measured and calculated thermal stresses in a hybrid metal matrix composite spar cap element. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1985.
Знайти повний текст джерелаSrivatsan, T. S., Pradeep K. Rohatgi, and Simona Hunyadi Murph, eds. Metal-Matrix Composites. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92567-3.
Повний текст джерелаBansal, Suneev Anil, Virat Khanna, and Pallav Gupta. Metal Matrix Composites. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003194910.
Повний текст джерелаBansal, Suneev Anil, Virat Khanna, and Pallav Gupta. Metal Matrix Composites. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003194897.
Повний текст джерелаNatarajan, Nanjappan, Vijayan Krishnaraj, and J. Paulo Davim. Metal Matrix Composites. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-02985-6.
Повний текст джерелаDavim, J. Paulo, ed. Metal Matrix Composites. Berlin, München, Boston: DE GRUYTER, 2014. http://dx.doi.org/10.1515/9783110315448.
Повний текст джерелаContreras Cuevas, Antonio, Egberto Bedolla Becerril, Melchor Salazar Martínez, and José Lemus Ruiz. Metal Matrix Composites. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91854-9.
Повний текст джерелаFridlyander, J. N., ed. Metal Matrix Composites. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1266-6.
Повний текст джерелаGieskes, Sebastiaan A., and Marten Terpstra, eds. Metal Matrix Composites. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3666-2.
Повний текст джерелаChawla, Nikhilesh, and Krishan K. Chawla. Metal Matrix Composites. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-9548-2.
Повний текст джерелаЧастини книг з теми "Hybrid metal matrix composites"
Sampath Kumar, T., M. Vignesh, A. Vinoth Jebaraj, P. Dilip Kumar, N. V. S. S. S. K. Manne Dilip, and Abhishek Singh. "Drilling of Hybrid MMCs Using DLC- and HC-Coated Tools." In Metal Matrix Composites, 49–71. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003345466-4.
Повний текст джерелаVignesh, M., G. Ranjith Kumar, M. Sathishkumar, G. Rajyalakshmi, and R. Ramanujam. "Study of Machinability, Mechanical, and Tribological Properties of Hybrid Al-MMC." In Metal Matrix Composites, 91–116. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003345466-6.
Повний текст джерелаBalamurugan, K., Y. Jyothi, Chinnamahammad Bhasha, and S. Vigneshwaran. "Erosion Studies on Al/TiC/RHA Reinforced Hybrid Composites through Response Surface Method." In Metal Matrix Composites, 117–37. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003345466-7.
Повний текст джерелаSharma, Sahil, Farhan Ahmad Shamim, Akshay Dvivedi, Pradeep Kumar, and Tarlochan Singh. "Hybrid Machining of Metal Matrix Composites." In Fabrication and Machining of Advanced Materials and Composites, 235–54. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327370-13.
Повний текст джерелаDibelka, Jessica A., and Scott W. Case. "Damage Evolution Model for Hybrid Metal Matrix Composites." In Supplemental Proceedings, 815–22. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118356074.ch102.
Повний текст джерелаRajmohan, T., K. Palanikumar, and G. Harish. "Surface Roughness Evaluation in Drilling Hybrid Metal Matrix Composites." In Lecture Notes in Mechanical Engineering, 325–32. India: Springer India, 2012. http://dx.doi.org/10.1007/978-81-322-1007-8_29.
Повний текст джерелаBabu, J. S. S., K. P. Nair, and C. G. Kang. "Hybrid Preform for Metal Matrix Composites: Processing and Characterization." In Solid State Phenomena, 421–24. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908451-26-4.421.
Повний текст джерелаSundaram, Jayavelu, J. Udaya Prakash, and Harivind Kagitha. "Wear Properties on AA2014/Al2O3/TiB2 Hybrid Metal Matrix Composites." In Lecture Notes in Mechanical Engineering, 389–95. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6619-6_42.
Повний текст джерелаPhani, K. V. S., Basanta Kumar Nanda, Swayam Bikash Mishra, Santosh Kumar Nayak, and Ruby Mishra. "Fabrication and Structural Analysis of Hybrid Metal Matrix Composites (MMC)." In Lecture Notes in Mechanical Engineering, 231–42. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2921-4_22.
Повний текст джерелаBiswal, Sweta Rani, and Seshadev Sahoo. "Self-lubricating Hybrid Metal Matrix Composite toward Sustainability." In Handbook of Sustainable Materials: Modelling, Characterization, and Optimization, 193–212. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003297772-11.
Повний текст джерелаТези доповідей конференцій з теми "Hybrid metal matrix composites"
Christy, John Victor, and Abdel Hamid Ismail Mourad. "Friction Stir Welding of Hybrid Recycled Metal Matrix Composites." In ASME 2022 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/pvp2022-84429.
Повний текст джерелаEckstein, Eric, Alberto Pirrera, and Paul Weaver. "Thermally Driven Morphing with Hybrid Laminates and Metal Matrix Composites." In 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2015. http://dx.doi.org/10.2514/6.2015-1428.
Повний текст джерелаReddy, Janvita, and Ram Singar Yadav. "Intelligent Modelling and Machining Characteristics of Hybrid Machining for Hybrid Metal Matrix Composites." In ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-95543.
Повний текст джерелаBandekar, N., and M. G. A. Prasad. "Wear behavior of aluminum hybrid metal matrix composites (HMMCS): a review." In National Conference on Challenges in Research & Technology in the Coming Decades National Conference on Challenges in Research & Technology in the Coming Decades (CRT 2013). Institution of Engineering and Technology, 2013. http://dx.doi.org/10.1049/cp.2013.2539.
Повний текст джерелаLee, Byung J., Taewon Lim, J. I. Song, and K. S. Han. "Mechanical Properties and Fatigue Crack Propagation Behavior of Hybrid Metal Matrix Composites." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/960577.
Повний текст джерелаSaranu, Ravikumar, Ratnam Chanamala, and Srinivasa Rao Putti. "Corrosion and tribological behavior of magnesium metal matrix hybrid composites-A review." In INTERNATIONAL CONFERENCE ON TRENDS IN MATERIAL SCIENCE AND INVENTIVE MATERIALS: ICTMIM 2020. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0015690.
Повний текст джерелаRajmohan, T., and K. Palanikumar. "A mathematical model to predict thrust force in drilling hybrid metal matrix composites." In 2010 Frontiers in Automobile and Mechanical Engineering (FAME). IEEE, 2010. http://dx.doi.org/10.1109/fame.2010.5714788.
Повний текст джерелаSatish, J., and K. G. Satish. "Study of wear behaviour of magnesium hybrid metal matrix composites using Taguchi method." In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS RESEARCH (ICAMR - 2019). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0022804.
Повний текст джерелаSasimurugan, T., and K. Palanikumar. "Experimental studies on machining characteristics of hybrid aluminium metal matrix composite and carbon nano tubes added hybrid aluminium metal matrix composite." In International Conference on Nanoscience, Engineering and Technology (ICONSET 2011). IEEE, 2011. http://dx.doi.org/10.1109/iconset.2011.6167944.
Повний текст джерелаLester, Brian, Yves Chemisky, and Dimitris Lagoudas. "Numerical Prediction of Effective Transformation Properties of Hybrid SMA-Ceramic Composites." In ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2010. http://dx.doi.org/10.1115/smasis2010-3748.
Повний текст джерелаЗвіти організацій з теми "Hybrid metal matrix composites"
Kumar, Ramasamy Sanjeev, Allaka Gopichand, and Rajumani Srinivasan. Fabrication, Microstructural and Mechanical Behaviour of Al-ZrO2 -TiC Hybrid Metal Matrix Composite. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, November 2021. http://dx.doi.org/10.7546/crabs.2021.11.10.
Повний текст джерелаReynolds, G. H., and L. Yang. Plasma Joining of Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, November 1986. http://dx.doi.org/10.21236/ada176690.
Повний текст джерелаReynolds, G. H., and L. Yang. Plasma Joining of Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, December 1986. http://dx.doi.org/10.21236/ada178731.
Повний текст джерелаReynolds, G. H., and L. Yang. Plasma Joining of Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, March 1987. http://dx.doi.org/10.21236/ada181056.
Повний текст джерелаReynolds, G. H., and L. Yang. Plasma Joining of Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, December 1985. http://dx.doi.org/10.21236/ada164095.
Повний текст джерелаShelley, J. S., R. LeClaire, and J. Nichols. Metal Matrix Composites for Liquid Rocket Engines. Fort Belvoir, VA: Defense Technical Information Center, January 2001. http://dx.doi.org/10.21236/ada410056.
Повний текст джерелаNewton, Crystal H. Implementation of the Military Handbook 17 for Polymer Matrix Composites and Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, April 1994. http://dx.doi.org/10.21236/ada278795.
Повний текст джерелаNewton, Crystal H. Implementation of the Military Handbook 17 for Polymer Matrix Composites and Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, October 1994. http://dx.doi.org/10.21236/ada285629.
Повний текст джерелаNewton, Crystal H. Implementation of the Military Handbook 17 for Polymer Matrix Composites and Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, October 1994. http://dx.doi.org/10.21236/ada285772.
Повний текст джерелаViswanathan, S., W. Ren, W. D. Porter, C. R. Brinkman, A. S. Sabau, and R. M. Purgert. Metal Compression Forming of aluminum alloys and metal matrix composites. Office of Scientific and Technical Information (OSTI), February 2000. http://dx.doi.org/10.2172/751621.
Повний текст джерела