Добірка наукової літератури з теми "Graphene Oxide Thin Film"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Graphene Oxide Thin Film".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Graphene Oxide Thin Film"
Do Thi Thuy. "SYNTHESIS THIN FILM ELECTRODES GRAPHENE VIA NOVEL 3D PRINTALBE TECHNIQUE AND DETERMINE PROPERTY ELECTROCHEMICAL." Journal of Military Science and Technology, no. 75A (November 11, 2021): 29–37. http://dx.doi.org/10.54939/1859-1043.j.mst.75a.2021.29-37.
Повний текст джерелаAhn, Ho Sang, Hye Jin Park, Ju Hyun Oh, Jin Chul Joo, and Dong Joo Kim. "VOCs Sensing Property of Graphene Oxide Thin Film by Reduction Rate." Applied Mechanics and Materials 440 (October 2013): 64–68. http://dx.doi.org/10.4028/www.scientific.net/amm.440.64.
Повний текст джерелаKim, Daeok, and Ali Coskun. "Graphene oxide-templated preferential growth of continuous MOF thin films." CrystEngComm 18, no. 22 (2016): 4013–17. http://dx.doi.org/10.1039/c5ce02188j.
Повний текст джерелаAlazzam, Alamoodi, Abutayeh, Stiharu, and Nerguizian. "Fabrication of Porous Gold Film Using Graphene Oxide as a Sacrificial Layer." Materials 12, no. 14 (July 18, 2019): 2305. http://dx.doi.org/10.3390/ma12142305.
Повний текст джерелаAbdul Hussein, Adi Mahmood, Sallal Abdulhadi Abdullah, Mohammed RASHEED, and Rafid Sabbar Zamel. "Optical and Electrical Properties of Glass/Graphene Oxide Thin Films." Iraqi Journal of Physics (IJP) 18, no. 47 (November 30, 2020): 73–83. http://dx.doi.org/10.30723/ijp.v18i47.617.
Повний текст джерелаJaafar, E., Muhammad Kashif, S. K. Sahari, and Z. Ngaini. "Study on Morphological, Optical and Electrical Properties of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO)." Materials Science Forum 917 (March 2018): 112–16. http://dx.doi.org/10.4028/www.scientific.net/msf.917.112.
Повний текст джерелаZHU, JIAYI, and JUNHUI HE. "SELF-ASSEMBLY FABRICATION OF GRAPHENE-BASED MATERIALS WITH OPTICAL–ELECTRONIC, TRANSIENT OPTICAL AND ELECTROCHEMICAL PROPERTIES." International Journal of Nanoscience 11, no. 06 (December 2012): 1240032. http://dx.doi.org/10.1142/s0219581x12400327.
Повний текст джерелаBolhan, Aisyah, Norasikin Ahmad Ludin, Najah Syahirah Mohd Nor, Mohd Adib Ibrahim, Suhaila Sepeai, Mohd Asri Mat Teridi, Kamaruzzaman Sopian, and Azami Zaharim. "Catalytic Performance of Pt/rGO using Stacked Layer Technique for DSSC Counter Electrode." Jurnal Kejuruteraan 31, no. 1 (April 30, 2019): 115–22. http://dx.doi.org/10.17576/jkukm-2019-31(1)-14.
Повний текст джерелаKarlsson, Anton, Helena Grennberg, and Stefan Johansson. "Graphene oxide microstructure control of electrosprayed thin films." RSC Advances 13, no. 2 (2023): 781–89. http://dx.doi.org/10.1039/d2ra06278j.
Повний текст джерелаSafa, Saeed, Rasoul Sarraf-Mamoori, and Rouhollah Azimirad. "The Effects of Reduced Graphene Oxide (rGO) on ZnO Film UV-Detector." Advanced Materials Research 829 (November 2013): 577–82. http://dx.doi.org/10.4028/www.scientific.net/amr.829.577.
Повний текст джерелаДисертації з теми "Graphene Oxide Thin Film"
Tekenya, Ronald. "Graphene-modified pencil graphite mercury-film electrodes for the determination of trace metals by cathodic adsorptive stripping voltammetry." University of the Western Cape, 2018. http://hdl.handle.net/11394/6552.
Повний текст джерелаThis project focuses on the simple, fast and highly sensitive adsorptive stripping voltammetry detection of Nickel and Cobalt complexed with DMG and Nioxime respectively at a Reduced Graphene Oxide modified pencil graphite electrode in water samples. This research as well demonstrates a novel electrochemically reduced graphene oxide (ERGO)/mercury film (MF) nanocomposite modified PGE, prepared through successive electrochemical reduction of graphene oxide (GO) sheets and in-situ plated mercury film. The GO and graphene were characterized using FT-IR, HR-SEM, HR-TEM, XRD and Raman spectroscopy. The FT-IR results supported by Xray diffraction analysis confirmed the inclusion of oxygen moieties within the graphitic structure during the chemical oxidation step. Microscopic and spectroscopic analysis was used to confirm the stackings of graphene on the pencil electrode. The ERGO-PG-MFE, in combination with a complexing agents of [dimethylglyoxime (DMG) and Nioxime] and square-wave cathodic stripping voltammetry (SW-CSV), was evaluated towards the individual determination of Ni2+ and Co2+ respectively and simultaneous determination of both metals from the combination of DMG and Nioxime mixture. A single-step electrode pre-concentration approach was employed for the in-situ Hg-film electroplating, metal-chelate complex formation and its non-electrolytic adsorption at – 0.7 V for the individual analysis of Ni2+ and Co2+. The current response due to metal-ligand(s) complex reduction were studied as a function of experimental variables; deposition/accumulation potential, deposition/accumulation time, rotation speed, frequency and amplitude and carefully optimized for the individual determination of Ni2+and Co2+ and simultaneous determination of Ni2+ and Co2+ at low concentration levels (μg L-1) in 0.1 M NH3- NH4Cl buffer solution (pH 9.4) solution. The recorded limit of detection for the individual analysis of Ni2+and Co2+ was found to be 0.120 μg L-1 and 0.220 μg L-1 respectively, at an accumulation time of 120 s for both metals. The recorded limit of detection of the simultaneous analysis of Ni2+ and Co2+ was found to be 6.1 μg L-1 and 1.8 μg L-1 respectively. The ERGO-PG-MFE further demonstrated a highly selective stripping response toward all trace metal analysis. The testing of the applicability of graphene-based sensor and method in laboratory tap water samples was evaluated. This electrode was found to be sensitive enough to detect metal ions in the tap water samples at the 0.2 μg L-1 level for individual analysis and 0.001 μg L-1 for simultaneous, well below WHO standards.
Sanga, Nelia Abraham. "Determination of heavy metals at the electrochemically reduced graphene oxide mercury film electrode (ERGO-HgF-PGE) using adsorptive stripping voltammetry." University of Western Cape, 2020. http://hdl.handle.net/11394/7718.
Повний текст джерелаThis work reports the use of a pencil graphite electrode (PGE) as inexpensive and sensitive electrochemical sensing platform fabricated by using electrochemically reduced graphene oxide (ERGO) in conjunction with an in-situ plated thin mercury film. For the first time the ERGOHgF-PGE sensor is proposed for simultaneous detection of cadmium (Cd2+), copper (Cu2+), lead (Pb2+) and zinc (Zn2+) using N-Nitroso-N-phenylhydroxylamine (cupferron) as complexing agent by square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV). The technique is based on the adsorption of cupferron- metal ion complexes onto the surface of the ERGO-HgFPGE at 0.1 V for 60 s carried out in 0.1 M acetate buffer solution (pH 4.6). The synthesized graphene oxide (GO) and graphene nanosheets (GNs) were characterized using different analytical techniques such as FT-IR which confirms the presence of oxygen moieties embedded in the graphitic structure and further demonstrated by UV-Vis, validating the synthesis of GO
2023
Le, Louie. "Nanocomposites and graphene oxide thin film coatings on the surface of fiber reinforced composites for enhanced flame retardancy." Thesis, Wichita State University, 2013. http://hdl.handle.net/10057/6425.
Повний текст джерелаPant, Bharat Raj. "A Comparative Study on P-type Nickel Oxide and N-type Zinc Oxide for Gas Sensor Applications." University of Toledo / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1525473245395728.
Повний текст джерелаDorenkamp, Yvonne Jeannette. "Inelastic H-Atom scattering from ultra-thin films." Doctoral thesis, Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2018. http://hdl.handle.net/11858/00-1735-0000-002E-E49B-7.
Повний текст джерелаFerrah, Djawhar. "Etude des propriétés physico-chimiques d'interfaces par photoémission." Thesis, Ecully, Ecole centrale de Lyon, 2013. http://www.theses.fr/2013ECDL0048/document.
Повний текст джерелаThe main objective of this thesis is to study the chemical and physical properties at the surface or at the interface between thin layers by photoemission spectroscopy (XPS), photoelectron diffraction (XPD), and time resolved photoemission (PTR) . The experiments were conducted using an Alka source at INL or soft -X ray synchrotron radiation at Soleil, the French national Synchrotron facility. The first photoemission study has been performed on platinum deposited on thin Gd2(h layers grown by Molecular Bearn Epitaxy (MBE) on Si (111) substrate. The charge transfer between Pt and 0 at the interface causes a chemical shift to higher binding energies without changing the characteristic shape of the metal XPS peak. The XPD study shows that Pt is partially crystallized into two (111)-oriented do mains on Gd20 3 (111) with the in-plane epitaxial relationships [11 0] Pt (111) / / [11 0] Gd203 (111) and [101] Pt(111)/ / [11 0] Gd20 3 (111). In addition to bi-domains formation of platinum Pt (111) on Gd20 3 (111), a new ordered phase of platinum oxide Pt02 at the Pt/ Gd203 interface have been observed. The study of the background of the polar curves depending of the morphology has shown, that the film of Pt does not wet on the oxide, due to the low energy of interaction at the interface compared to the Pt thin layer. The second study has been interested to the photoemission time-resolved study of non-reactive metal / semiconductor model system. We have studied the thin layer gold (Au) growth on silicon (Si) substrate before and during annealing in TEMPO beam line (synchrotron Soleil).The XPS study, shows before annealing the formation of silicon native oxide on heterostructure at ambient temperature. The desorption of silicon oxide during annealing at low temperature induce photoemission intensity decreases with time. The desorption of oxide and alloy formation (AuSi) induce distribution of pits with cubic form at silicon surface due to gold etching activity. The third photoemission study has concerned thin films of a few layers of graphene obtained by solid-state graphitization from 6H-SiC (0001) substrates have been studied by X-ray photoelectron spectroscopy (XPS) and X-ray photoelectron diffraction (XPD). The Cls core-level has been resolved into components, which have been associated with carbon from bulk SiC, carbon from graphene and carbon at the interface graphene/ 6H-SiC (0001). Then, the intensity of each of these components has been recorded as a function of polar (azimuth) angle for several azimuth (polar) angles. These XPD measurements provide crystallographic information which clearly indicates that the graphene sheets are organized in graphite-like structure on 6H-SiC(0001), an organization that results of the shrinking of the 6H-SiC (0001) lattice after Si depletion. Finally the decoupling of graphene from 6H-SiC (0001) substrate by oxygen intercalation has been studied from the XPS point of view. Finally, photoemission study has concerned thin film of InP (phosphor indium ) islands grown by Molecular Bearn Epitaxy (MBE) on SrTi03 (001) bulk substrate have been investigated by X-ray photoelectron spectroscopy and diffraction (XPS/ XPD).Integration of III-V semi-conductor on silicon wafer, via SrTi03 buffer is currently the subject of intense research because of its potentially interesting applications in future nano-optoelectronics. The Ols, Sr3d, Ti2p, In3d, and P 2p core level area have been studied as function of azimuth angle for different polar angles. Comparison of the XPD azimuth curves of Sr3d and In3d shows that islands InP are oriented (001) with an in-plane epitaxial relationship [110] InP(001 ) // [100] SrTi03 (001). AFM images shows that InP islands are regularly dispersed on the surface. Their shape is a regularly facetted half-sphere
Ly, Kally Chein Sheng 1992. "Fabricação e caracterização de filme fino regenerável hidrofóbico." [s.n.], 2017. http://repositorio.unicamp.br/jspui/handle/REPOSIP/330349.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin
Made available in DSpace on 2018-09-02T14:50:41Z (GMT). No. of bitstreams: 1 Ly_KallyCheinSheng_M.pdf: 2442128 bytes, checksum: 86716c6c19fa3a9db425b32c36463141 (MD5) Previous issue date: 2017
Resumo: Materiais biomiméticos são inspirados em estruturas biológicas para a obtenção de propriedades e funcionalidades específicas. Dentre os materiais biomiméticos, os que são capazes de se regenerar (self-healing) despertaram grande interesse pelo potencial de aplicação em diversas áreas. Para ilustrar, alguns materiais autorregeneráveis poliméricos apresentam regeneração múltipla, necessitando apenas de água para que a regeneração ocorra em alguns minutos, aumentando consideravelmente a proteção mecânica da superfície contra desgastes, danos mecânicos entre outros. Entretanto, múltiplas imersões em água ou em meios aquosos pode degradar o material e neste contexto este projeto visa incorporar a hidrofobicidade a um sistema regenerável. Desta forma, o material regenerável hidrofóbico, durante sua regeneração imersa em água, poderá diminuir a interação da superfície não danificada com a água, reduzindo corrosões e degradações devido a meios aquosos. Estudamos a nanoestruturação de materiais através da técnica de automontagem por adsorção física (LbL, do inglês Layer-by-Layer) utilizando os polieletrólitos poli(etileno imina) (PEI) e poli(ácido acrílico) (PAA), a fim de produzir revestimentos capazes de se regenerar a danos mecânicos micrométricos. Adicionalmente, foram incorporados a estes dois materiais nanofolhas de óxido de grafeno reduzido (rGO) funcionalizados com poli(cloridrato de alilamina) (GPAH) e poli(estireno-sulfonato de sódio) (GPSS), com o intuito de verificarmos um aumento de resistência a abrasão do material e alterações nas propriedades elétricas na nanoestrutura formada para aumentar o potencial de aplicação em eletrônica flexível. A arquitetura molecular (GPAH-PEI/GPSS-PAA)60 foi caracterizada com espectroscopia Raman, medidas de ângulo de contato, microscopia de força atômica, medidas elétricas e nanoindentação. Foi observada boa regeneração do material após 15 minutos de imersão em água a temperatura ambiente em um dano mecânico da ordem de 10 micrômetros. Também observamos boa hidrofobicidade do filme LbL (GPAH-PEI/GPSS-PAA)60 ( teta = 136º), e medidas de microscopia de força atômica e perfilometria indicaram, respectivamente, rugosidade superficial de 55 nm em uma área de (2 ?m x 2 ?m) e espessura de filme de 30 ?m. A análise Raman apontou para uma forte interação das nanofolhas de rGO com os polímeros, corroborando o tem caráter elétrico isolante do filme (GPAH-PEI/GPSS-PAA)60, que apresentou função trabalho ~ 5,2 eV e condutividade elétrica da ordem de 10-7 S/cm, que acreditamos resultar das fortes interações das nanofolhas com os polímeros. Por fim, medidas de nanoindentação indicaram que a incorporação de nanofolhas de GPSS e GPAH aumentou em 10 vezes a dureza do nanocompósito formado, sem comprometer a regeneração
Abstract: Biomimetic materials are inspired in biological structures to obtain specific properties and functionalities and among them, those capable of self-healing brought great interest due to high potential of application in different areas. To illustrate, some polymeric self-healing materials present multiple regeneration in the presence of water, with the regeneration occurring within a few minutes, increasing considerably the mechanical protection of a surface against wear and mechanical damage among others. Nevertheless, multiple immersions in water or in aqueous media can degrade the material and in this context this project aims the incorporation of hydrophobicity to a self-healing system. In this way, the self-healing, hydrophobic material during its immersion in water may decrease the interaction of the damaged surface with water, reducing corrosion and degradation due to aqueous media. We study the nanostructuration f materials through the layer-by-layer (LbL) technique using poly(ethylene imine) (PEI) and poly(acrylic acid) (PAA) in order to produce self-healing coatings from micrometric mechanical damages. In addition, we also incorporate to these materials reduced graphene oxide (rGO) functionalized with poly(allylamine hydrochloride) (GPAH) and poly(styrene-sodium sulfonate) (GPSS), with the purpose of verifying an increase in the mechanical abrasion resistance of the material and changes in the electrical properties of the nanostructures formed to increase the potential application in flexible electronics. The molecular architecture (GPAH-PEI/GPSS-PAA)60 was characterized by Raman spectroscopy, contact angle measurements, atomic force microscopy, electrical measurements and nanoindentation. It was observed good self-healing capacity after 15 min f immersion in water at room temperature in a mechanical scratch of the order of 10 micrometers. It was also observed good hydrophobicity in the (GPAH-PEI/GPSS-PAA)60 LbL film ( teta = 136º) and atomic force microscopy and perfilometer indicate, respectively, surface roughness of 55 nm in a (2 ?m x 2 ?m) area and film thickness of 30 ?m. Raman analysis pointed out to a strong physical interaction between the rGO nanoplatelets with the polymeric materials, corroborating the strong insulating nature of (GPAH-PEI/GPSS-PAA)60 film that displayed a work function of 5.2 eV and electrical conductivity of 10-7 S/cm, which we believe results from the strong interactions of the nanosheets with the polymers. Finally, nanoindentation measurements indicated that the incorporation of GPAH and GPSS nanoplatelets increased hardness by 10 times, without compromising the regeneration
Mestrado
Física
Mestra em Física
1543078/2015
CAPES
Lacovig, Paolo. "Electronic structure, morphology and chemical reactivity of nanoclusters and low-dimensional systems: fast photoemission spectroscopy studies." Doctoral thesis, Università degli studi di Trieste, 2010. http://hdl.handle.net/10077/3685.
Повний текст джерелаL'obiettivo di questa tesi è l'applicazione della spettroscopia di fotoemissione allo studio di nanoparticelle supportate e di sistemi a bassa dimensionalità. Ad una primo periodo dedicato allo sviluppo del rivelatore e del software per un nuovo analizzatore d'energia per elettroni installato presso la linea di luce SuperESCA ad Elettra, è seguita una fase durante la quale ho eseguito una serie di esperimenti mirati ad esplorare le potenzialità del nuovo apparato sperimentale. Il primo risultato ottenuto riguarda la comprensione della relazione che intercorre tra le variazioni della reattività chimica del sistema Pd/Ru(0001) e il numero degli strati di Pd cresciuti in modo pseudomorfico sul substrato di rutenio. La risoluzione temporale raggiunta con la nuova strumentazione ci ha permesso di studiare processi dinamici su una scala temporale fino ad ora inaccessibile per la spettroscopia di fotoemissione dai livelli di core: in particolare abbiamo studiato la crescita del grafene ad alta temperatura sulla superficie (111) dell'iridio e la reattività chimica di nanocluster di Pt supportati su MgO. Nel primo caso abbiamo messo in evidenza come la formazione del grafene proceda attraverso la nucleazione di nano-isole di carbonio che assumono una peculiare forma di cupola. Nel secondo caso siamo riusciti a seguire sia la dinamica del processo di adsorbimento di CO, sia la reazione CO + 1/2 O2 -> CO2 sulle nanoparticelle di Pt depositate su un film ultra-sottile di ossido di magnesio. Infine, abbiamo caratterizzato la morfologia di nanoparticelle di Pd, Pt, Rh e Au cresciute su diversi substrati a base di carbonio, in particolare grafite, nanotubi a parete singola e grafene. Tra i vari risultati abbiamo compreso come l'interazione metallo-substrato dipenda dalla dimensione delle nano-particelle e abbiamo evidenziato il ruolo centrale dei difetti del substrato nei processi di nucleazione e intercalazione.
The objective of this thesis is the application of photoelectron spectroscopy for the investigation of supported nanoclusters and low-dimensional systems. After a first stage devoted to the development of the detector and the software for the electron energy analyser installed on the SuperESCA beamline at Elettra, during the PhD project I've performed a series of experiments aimed to explore the capabilities of the new experimental apparatus. One of the first results concerns the understanding of the relation between the modifications in the chemical reactivity of the Pd/Ru(0001) system and the thickness of the pseudomorphically grown Pd overlayer. The temporal resolution achieved with the new experimental set-up allowed us to study dynamical processes on a new time scale, in particular the graphene growth process at high temperature on the Ir(111) surface and the chemical reactivity of Pt nanoclusters supported on MgO. In the former case, we discovered that graphene formation proceeds via preliminary nucleation of dome-shaped C nano-islands. In the second case, we succeded in following both the dynamics of CO adsorption process and the CO + 1/2 O2 -> CO2 reaction on Pt nanoclusters grown on a ultra-thin film of magnesium oxide. Finally, the morphology of Pd, Pt, Rh and Au nanoclusers grown on different carbon-based substrates (namely graphite, single-walled carbon nanotubes and graphene) has been characterized. Among the results we report the understanding of the dependence of the metal-substrate interaction on the cluster size and the role of defects in the nucleation and intercalation processes.
XXII Ciclo
1972
Guan, Jingcheng. "Modelling zinc oxide thin-film growth." Thesis, Loughborough University, 2018. https://dspace.lboro.ac.uk/2134/36311.
Повний текст джерелаLi, Sonny X. "Nitrogen doped zinc oxide thin film." Berkeley, Calif. : Oak Ridge, Tenn. : Lawrence Berkeley National Laboratory ; distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2003. http://www.osti.gov/servlets/purl/821916-VLVAK9/native/.
Повний текст джерелаPublished through the Information Bridge: DOE Scientific and Technical Information. "LBNL--54116" Li, Sonny X. USDOE Director. Office of Science. Basic Energy Sciences (US) 12/15/2003. Report is also available in paper and microfiche from NTIS.
Книги з теми "Graphene Oxide Thin Film"
National Renewable Energy Laboratory (U.S.), ed. Amorphous indium-zinc-oxide transparent conductors for thin film PV: Preprint. Golden, CO: National Renewable Energy Laboratory, 2011.
Знайти повний текст джерелаLaconte, J. Micromachined thin-film sensors for SOI-CMOS co-integration. New York: Springer, 2011.
Знайти повний текст джерелаBarquinha, Pedro. Transparent oxide electronics: From materials to devices. Hoboken, N.J: Wiley, 2012.
Знайти повний текст джерелаKlaus, Ellmer, Klein Andreas Dr, and Rech Bernd, eds. Transparent conductive zinc oxide: Basics and applications in thin film solar cells. Berlin: Springer, 2008.
Знайти повний текст джерелаChubb, Donald L. Emittance theory for thin film selective emitter. [Washington, DC]: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаChubb, Donald L. Emittance theory for thin film selective emitter. [Washington, DC]: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаThin film metal-oxides: Fundamentals and applications in electronics and energy. New York: Springer, 2010.
Знайти повний текст джерелаK, Sahoo N., and Bhabha Atomic Research Centre, eds. ION assisted deposition of refractory oxide thin film coatings for improved optical and structural properties. Mumbai: Bhabha Atomic Research Centre, 1999.
Знайти повний текст джерелаArcher, Caroline Jane. An investigation of the low energy RF plasma bombardment of thin film tin oxide surfaces. [s.l: The Author], 1999.
Знайти повний текст джерелаFrance) International Conference on Thin Film Deposition of Oxide Multilayers Hybrid Structures (2nd 2001 Autrans. International Conference on Thin Film Deposition of Oxide Multilayers Hybrid Structures: TFDOM-2 : Autrans, France, October 18-19, 2001. Les Ulis, France: EDP Sciences, 2001.
Знайти повний текст джерелаЧастини книг з теми "Graphene Oxide Thin Film"
Nasrollahzadeh, Mahmoud, Mohaddeseh Sajjadi, and S. Mohammad Sajadi. "Functionalized-Graphene and Graphene Oxide: Fabrication and Application in Catalysis." In Photoenergy and Thin Film Materials, 661–727. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781119580546.ch16.
Повний текст джерелаMallick, Atri, Nibedita Haldar, Suman Nandy, and Chandan Kumar Ghosh. "Fabrication of Graphene, Graphene Oxide, Reduced Graphene Oxide, Fullerene (C60) and Carbon Nanotube Thin Film By Langmuir–Blodgett Method." In Materials Horizons: From Nature to Nanomaterials, 21–38. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7188-4_2.
Повний текст джерелаTismanar, Ioana, Alexandru Cosmin Obreja, Octavian Buiu, and Anca Duta. "Hydrophilicity Variation of TiO2—Graphene Oxide Composite Thin Films for Photocatalytic Applications." In Springer Proceedings in Energy, 387–97. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-55757-7_26.
Повний текст джерелаPerniu, Dana, Cristina Bogatu, Silvioara Gheorghita, Maria Covei, and Anca Duta. "Thin Films Based on ZnO-Graphene Oxide Heterostructures for Self-Cleaning Applications." In Springer Proceedings in Energy, 435–47. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-55757-7_30.
Повний текст джерелаNanda, Omita, Jampana Gayathri, A. M. Biradar, and Kanchan Saxena. "Fabrication of Reduced Graphene Oxide Conductive Thin Films Using Doctor Blade Technique." In Springer Proceedings in Physics, 53–57. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8625-5_6.
Повний текст джерелаMahaboob Jilani, S., and P. Banerji. "Effect of ZnO Loading on the Electrical Characteristics of Graphene Oxide-ZnO Based Thin Film Transistors." In Physics of Semiconductor Devices, 615–16. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-03002-9_156.
Повний текст джерелаHikita, Yasuyuki, and Harold Y. Hwang. "Complex Oxide Schottky Junctions." In Thin Film Metal-Oxides, 169–204. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-0664-9_5.
Повний текст джерелаLu, Jiwei, Kevin G. West, and Stuart A. Wolf. "Novel Magnetic Oxide Thin Films." In Thin Film Metal-Oxides, 95–129. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-0664-9_3.
Повний текст джерелаDemkov, Alexander A., and Agham B. Posadas. "Thin Oxide Film Characterization Methods." In Integration of Functional Oxides with Semiconductors, 89–114. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-9320-4_5.
Повний текст джерелаKambara, Hiroyuki, Theodor Schneller, and Rainer Waser. "Thin Film Multilayer Capacitors." In Chemical Solution Deposition of Functional Oxide Thin Films, 547–70. Vienna: Springer Vienna, 2013. http://dx.doi.org/10.1007/978-3-211-99311-8_22.
Повний текст джерелаТези доповідей конференцій з теми "Graphene Oxide Thin Film"
Kasischke, Maren, Stella Maragkaki, Andreas Ostendorf, Sergej Volz, and Evgeny L. Gurevich. "Graphene oxide reduction induced by femtosecond laser irradiation." In Nanostructured Thin Films X, edited by Tom G. Mackay, Akhlesh Lakhtakia, and Yi-Jun Jen. SPIE, 2017. http://dx.doi.org/10.1117/12.2274976.
Повний текст джерелаKadam, Mahesh M., Medha B. Sravani, V. G. Gaikar, and Neetu Jha. "Synthesis and fabrication of graphene oxide thin film." In CARBON MATERIALS 2012 (CCM12): Carbon Materials for Energy Harvesting, Environment, Nanoscience and Technology. AIP, 2013. http://dx.doi.org/10.1063/1.4810067.
Повний текст джерелаAzani, Azliza, Dewi Suriyani Che Halin, Kamrosni Abdul Razak, Mohd Mustafa Al Bakri Abdullah, Mohd Arif Anuar Mohd Salleh, Norsuria Mahmed, Muhammad Mahyiddin Ramli, Suhaila Sepeai, Mohd Fairul Sharin, and V. Chobpattana. "Self-cleaning property of graphene oxide/TiO2 thin film." In APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5118070.
Повний текст джерелаDevi, Lalita, Amodini Mishraand, and Subhasis Ghosh. "Thin film transistor based on graphene oxide for sensors." In DAE SOLID STATE PHYSICS SYMPOSIUM 2019. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0016916.
Повний текст джерелаJiang, Y., C. Yang, Q. Zhang, K. Yang, S. Kosolwattana, J. Joyner, H. Gullapalli, and R. Vajtai. "Reduced graphene oxide and gel polymer based thin film supercapacitor." In 2016 IEEE SENSORS. IEEE, 2016. http://dx.doi.org/10.1109/icsens.2016.7808550.
Повний текст джерелаHu, Yanyan, Tao Qi, Yajun Feng, Yaolun Yu, Nan Guo, and Yi Jia. "Reduced graphene oxide/carbon black thin-film mid-infrared photodetector." In Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, edited by Shining Zhu, Qifeng Yu, Junhong Su, Lianghui Chen, and Junhao Chu. SPIE, 2022. http://dx.doi.org/10.1117/12.2621166.
Повний текст джерелаChen, Kun-Tso, Yu-Hsuan Lin, and Jeng-Rong Ho. "Fabrication of graphene by pulsed laser annealing from a graphene oxide thin film." In CLEO: Applications and Technology. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/cleo_at.2012.jw4a.121.
Повний текст джерелаDunst, Katarzyna J., and Piotr Jasiński. "Graphene oxide, reduced graphene oxide and composite thin films NO2 sensing properties." In 14th International Conference on Optical and Electronic Sensors, edited by Piotr Jasiński. SPIE, 2016. http://dx.doi.org/10.1117/12.2246761.
Повний текст джерелаMat Hussin, Mohd Rofei, Siti Aishah Mohamad Badaruddin, Mohd Hilmy Azuan Hamzah, Nik Mohd Razali Mohd Nor, Yuan Piou Choong, Hin Yong Wong, and Mukter Zaman. "Atomization of Reduced Graphene Oxide Ultra-thin Film for Transparent Electrode Coating." In 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies (CSUDET). IEEE, 2019. http://dx.doi.org/10.1109/csudet47057.2019.9214741.
Повний текст джерелаGulia, Priyanka, Ranjeet Brajpuriya, Sunil Kumar, and Ambuj Tripathi. "Synthesis of graphene oxide thin film and effect of electron beam irradiation." In DAE SOLID STATE PHYSICS SYMPOSIUM 2016. Author(s), 2017. http://dx.doi.org/10.1063/1.4980805.
Повний текст джерелаЗвіти організацій з теми "Graphene Oxide Thin Film"
Li, Sonny Xiao-zhe. Nitrogen doped zinc oxide thin film. Office of Scientific and Technical Information (OSTI), January 2003. http://dx.doi.org/10.2172/821916.
Повний текст джерелаHaridoss, P., E. Hellstrom, F. H. Garzon, D. R. Brown, and M. Hawley. Thin film ionic conductors based on cerium oxide. Office of Scientific and Technical Information (OSTI), December 1994. http://dx.doi.org/10.2172/10103830.
Повний текст джерелаDr. Harlan U. Anderson. Microporous and Thin Film Membranes for Solid Oxide Fuel. Office of Scientific and Technical Information (OSTI), February 2007. http://dx.doi.org/10.2172/908515.
Повний текст джерелаShaban, Mohamed, G. F. Attia, Mohamed A. Basyooni, and Hany Hamdy. Synthesis and characterization of Tin oxide thin film, effect of annealing on multilayer film. Edited by Lotfia Elnai and Ramy Mawad. Journal of Modern trends in physics research, December 2014. http://dx.doi.org/10.19138/mtpr/(14)90-99.
Повний текст джерелаLad, Robert J. Structural, electronic and chemical properties of metal/oxide and oxide/oxide interfaces and thin film structures. Office of Scientific and Technical Information (OSTI), December 1999. http://dx.doi.org/10.2172/758832.
Повний текст джерелаNguyen Minh and Kurt Montgomery. TAPE CALENDERING MANUFACTURING PROCESS FOR MULTILAYER THIN-FILM SOLID OXIDE FUEL CELLS. Office of Scientific and Technical Information (OSTI), October 2004. http://dx.doi.org/10.2172/835848.
Повний текст джерелаJie Guan and Nguyen Minh. MATERIAL AND PROCESS DEVELOPMENT LEADING TO ECONOMICAL HIGH-PERFORMANCE THIN-FILM SOLID OXIDE FUEL CELLS. Office of Scientific and Technical Information (OSTI), October 2003. http://dx.doi.org/10.2172/822898.
Повний текст джерелаJie Guan and Nguyen Minh. MATERIAL AND PROCESS DEVELOPMENT LEADING TO ECONOMICAL HIGH-PERFORMANCE THIN-FILM SOLID OXIDE FUEL CELLS. Office of Scientific and Technical Information (OSTI), December 2003. http://dx.doi.org/10.2172/822899.
Повний текст джерелаJie Guan, Atul Verma, and Nguyen Minh. MATERIAL AND PROCESS DEVELOPMENT LEADING TO ECONOMICAL HIGH-PERFORMANCE THIN-FILM SOLID OXIDE FUEL CELLS. Office of Scientific and Technical Information (OSTI), April 2003. http://dx.doi.org/10.2172/822139.
Повний текст джерелаLee, You-Kee, Jung-Yeul Kim, Young-Ki Lee, Insoo Kim, Hee-Soo Moon, Jong-Wan Park, Craig P. Jacobson, and Steven J. Visco. Conditioning effects on La1-xSrxMnO3-Yttria stabilized Zirconia electrodes for thin-film solid oxide fuel cells. Office of Scientific and Technical Information (OSTI), December 2002. http://dx.doi.org/10.2172/810538.
Повний текст джерела