Добірка наукової літератури з теми "FSCW"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "FSCW".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "FSCW"
Muteba, Mbika, Adisa A. Jimoh, and Dan V. Nicolae. "Performance Analysis of Induction Machines with Unconventional Winding Configurations." Applied Mechanics and Materials 260-261 (December 2012): 337–41. http://dx.doi.org/10.4028/www.scientific.net/amm.260-261.337.
Повний текст джерелаHu, Xiaobin, Chen Lu, and Xiaoqing Zhu. "A Simplified Model for Dynamic Response Analysis of Framed Self-Centering Wall Structures under Seismic Excitations." Shock and Vibration 2019 (April 15, 2019): 1–14. http://dx.doi.org/10.1155/2019/2360150.
Повний текст джерелаLiu, Suying, and Jinlin Huang. "Multi-objective optimization of a spoke-type permanent magnet motor with fractional-slot concentrated windings for EVs." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 40, no. 3 (July 26, 2021): 561–78. http://dx.doi.org/10.1108/compel-08-2020-0278.
Повний текст джерелаJedryczka, Cezary, Wojciech Szelag, and Zbigniew Jerry Piech. "Multiphase permanent magnet synchronous motors with fractional slot windings." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 35, no. 6 (November 7, 2016): 1937–48. http://dx.doi.org/10.1108/compel-03-2016-0120.
Повний текст джерелаClark, James H., Lucie A. Pfaltzgraff, Vitaliy L. Budarin, Andrew J. Hunt, Mark Gronnow, Avtar S. Matharu, Duncan J. Macquarrie, and James R. Sherwood. "From waste to wealth using green chemistry." Pure and Applied Chemistry 85, no. 8 (March 27, 2013): 1625–31. http://dx.doi.org/10.1351/pac-con-12-09-01.
Повний текст джерелаWang, Aimeng, and Shanshan Li. "Investigation of E-Core Modular Permanent Magnet Wind Turbine." Energies 13, no. 7 (April 6, 2020): 1751. http://dx.doi.org/10.3390/en13071751.
Повний текст джерелаJędryczka, Cezary, Dawid Danielczyk, and Wojciech Szeląg. "Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents." Sensors 20, no. 8 (April 23, 2020): 2406. http://dx.doi.org/10.3390/s20082406.
Повний текст джерелаMaskell, D. L., and G. S. Woods. "A frequency modulated envelope delay FSCW radar for multiple-target applications." IEEE Transactions on Instrumentation and Measurement 49, no. 4 (2000): 710–15. http://dx.doi.org/10.1109/19.863911.
Повний текст джерелаWang, Keyi, and Heyun Lin. "Modular Permanent Magnet Synchronous Machine with Low Space Harmonic Content." Energies 13, no. 15 (July 31, 2020): 3924. http://dx.doi.org/10.3390/en13153924.
Повний текст джерелаGabov, Viktor, Dmitrii Shishliannikov, Aleksandr Korolev, Aleksei Mikriukov, and Aleksandr Muravskii. "Rationale for the efficient design of a face scraper-type cutting conveyor." Izvestiya vysshikh uchebnykh zavedenii. Gornyi zhurnal, no. 1 (February 20, 2023): 46–54. http://dx.doi.org/10.21440/0536-1028-2023-1-46-54.
Повний текст джерелаДисертації з теми "FSCW"
Oliveira, Pedro Henrique Freiria de. "Estudo das propriedades e desempenho mecânico de juntas soldadas por fricção pontual de poli (metacrilato de metila) (PMMA)." Universidade Federal de São Carlos, 2012. https://repositorio.ufscar.br/handle/ufscar/899.
Повний текст джерелаUniversidade Federal de Minas Gerais
Polymeric components have been replacing traditional materials such as glass or metals in a wide range of applications due to their advantages, such as optimized specific strength (weight-to-strength ratio), reduced fabrication time and costs, and design flexibility. The increasing use of polymeric materials in engineering requires efficient and environmental friendly fabrication and processing technologies. Initially developed for metals, the Friction Stir Spot Welding (FSSW) is a joining technique with short process cycles, low energy consumption and no need of consumables. Friction Stir Spot Welding has excellent performance in welding of lightweight alloys, showing promising results in thermoplastic welding. This study investigates the relationships between friction stir spot welding parameters (tool rotational speed, plunge rate and dwell time) and weld properties (joint geometry, process temperature, microstructure, lap shear resistance and failure mechanisms) in polymethylmethacrylate (also known as PMMA) single-spot joints. PMMA friction stir spot welds showed similar mechanical performance in comparison to other current welding techniques, with equal or shorter welding cycle times. Differential scanning calorimetry and gel permeation chromatography analysis demonstrated that polymer degradation level in the weld region was negligible. The statistical models proposed for FSSW of PMMA showed good repeatability and reproducibility for the investigated material and welding ranges. Moreover, the feasibility of the Friction Spot Welding (FSpW) a new joining technology developed as a further improvement of the friction stir spot welding was successfully demonstrated in thermoplastic polymers for the first time worldwide. Sound FSpW-single lap joints on PMMA were produced and their properties studied within an exploratory study.
A busca por eficiência econômica e tecnologias ecologicamente corretas tem sido observada em praticamente todos os setores da produção industrial, desde o desenvolvimento de materiais, design de produtos e inclusive na área da soldagem. A soldagem ponto por fricção e mistura mecânica, FSSW (do inglês Friction Stir Spot Welding) e a Friction Spot Welding FSpW são técnicas de soldagem recentes e que têm sido amplamente empregadas na união de ligas metálicas leves, em que as soldas geralmente apresentam excelentes propriedades mecânicas. Além disso, ciclos de soldagem curtos, baixo consumo de energia e ausência de necessidade de adição de material ou elementos de soldagem são características positivas encontradas nesses novos processos. Na área de materiais poliméricos, entretanto, este é um novo e promissor assunto. Neste trabalho buscou-se investigar a relação entre os parâmetros do processo de soldagem por FSSW (velocidade de rotação da ferramenta, taxa de penetração e tempo de recalque) e as propriedades das juntas (geometria da solda, máxima temperatura processual, área afetada termicamente, resistência mecânica ao cisalhamento sob tensão e mecanismos de fratura) em placas de poli (metacrilato de metila). Foi possível observar a formação de juntas com resistência mecânica ao cisalhamento semelhante a outros processos atualmente utilizados na indústria, com tempos de ciclo de soldagem iguais ou inferiores a esses processos. As análises via calorimetria diferencial exploratória (DSC) e cromatografia por permeação em gel (GPC) demonstraram que os níveis de degradação termomecânica encontrados nas amostras foram insignificantes. A modelagem estatística do processo demonstrou a boa repetibilidade e reprodutibilidade dentro das condições estudadas. Nesse trabalho, também foi investigado através de um estudo exploratório, pela primeira vez, a viabilidade da nova técnica FSpW na soldagem de termoplásticos, demonstrando, com sucesso, a capacidade de obtenção de juntas de boa qualidade em PMMA.
Gonçalves, Joel. "Soldagem pontual por fricção (FSpW) de poliamida 6." Universidade Federal de São Carlos, 2015. https://repositorio.ufscar.br/handle/ufscar/7314.
Повний текст джерелаApproved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-21T12:40:24Z (GMT) No. of bitstreams: 1 DissJG.pdf: 8680920 bytes, checksum: 558643ae51125e185840f2e6e5e07b83 (MD5)
Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-21T12:40:30Z (GMT) No. of bitstreams: 1 DissJG.pdf: 8680920 bytes, checksum: 558643ae51125e185840f2e6e5e07b83 (MD5)
Made available in DSpace on 2016-09-21T12:40:37Z (GMT). No. of bitstreams: 1 DissJG.pdf: 8680920 bytes, checksum: 558643ae51125e185840f2e6e5e07b83 (MD5) Previous issue date: 2015-08-03
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Friction Spot Welding (FSpW) is an innovative technique developed and patented in 2005 by the Helmholtz Zentrum Geesthacht (HZG) research center in Germany. FSpW uses the friction between a rotating tool and the workpieces to generate heat enough to cause diffusion across the interface to consolidate the weld. This new welding technology has been tested and optimized with the objective of produce overlap weld joints between two polyamide 6 plates. Full factorial design of experiments (24) and analysis of variance (ANOVA) allowed to explain the effects of weld parameters as rotational speed (RS), welding time (WT), plunge depth (PP), holding pressure time (HPT) and the interactions between these main parameters on the microstructural characteristics and mechanical strength of the joints. The rotational speed (RS) and welding time (WT), within the limits studied, had greater influence on the mechanical single lap shear strength of the joints that achieved up to 26 MPa. This behavior was related to the higher heat generation during the weld, reaching temperatures of up to 275°C, thereby increasing the welded area. The parameter holding pressure time (HPT), designed in this study allowed the cooling and solidification of the polymer under pressure, improving the weld surface finishing and avoiding defects as voids in the weld area. The most common failure for the joints with higher mechanical strength was the fracture of one of the plates while the joints with lower mechanical strength showed interface shear failure. The degree of crystallinity of PA6 in the welded area did not show a significant difference as compared to the base material. The molecular weight of PA6 in the welded area was reduced in the worst case 7% as compared to the base material (Mv = 41.800 g/mol), and that reduction occurred linearly with the increase of the temperature during the welding; however, that low degree of degradation was not found to affect the mechanical strength of the joints. These characteristics emphasize the potential of this FSpW as an alternative to the current welding methods for polyamide 6.
A Soldagem Pontual por Fricção (FSpW) foi desenvolvida e patenteada pela Helmholtz-Zentrum Geesthacht (HZG), na Alemanha. A FSpW é uma técnica de soldagem pontual que ocorre por meio da fricção de uma ferramenta, com movimentos rotacional e axial, através das amostras, gerando aquecimento suficiente para fundir e misturar localmente o(s) polímero(s), com posterior consolidação sob pressão. Este estudo teve como principal objetivo investigar o uso da FSpW na fabricação de juntas pontuais entre chapas de poliamida 6 (PA6) sobrepostas. Experimentos do tipo fatorial completo (24) e análise de variância (ANOVA) possibilitaram a compreensão dos efeitos dos parâmetros de soldagem, velocidade de rotação (VR), tempo de soldagem (TS), profundidade de penetração da ferramenta (PP), tempo de consolidação (TC), e de suas interações, sobre características microestruturais e a resistência mecânica das juntas. Os parâmetros velocidade de rotação (VR) e tempo de soldagem (TS), dentro dos limites estudados, apresentaram maior influência sobre a resistência mecânica das juntas, alcançando 26 MPa. Este comportamento foi relacionado à maior geração de calor durante a soldagem, atingindo temperaturas de até 275oC, consequentemente, aumentando a área soldada. A utilização do parâmetro tempo de consolidação (TC), idealizado neste estudo, possibilitou o resfriamento e solidificação do polímero sob pressão, melhorando o acabamento superficial da solda e evitando a formação de defeitos. Juntas com maiores valores de resistência ao cisalhamento sob tração apresentaram maior probabilidade de falha por fratura de uma das chapas, enquanto que juntas menos resistentes falharam por separação das chapas. O grau de cristalinidade da PA6 nas soldas não sofreu variação significativa e observou-se um decréscimo de até 7% na massa molar da PA6 em relação ao material de base (Mv = 41.800 g/mol) que ocorreu de forma linear com o aumento da temperatura durante a solda, porém essa alteração não comprometeu a resistência mecânica da solda.
Kennard, Kirtis Frankland. "A Simple Method for Evaluating Wear in Different Grades of Tooling Applied to Friction Stir Spot Welding." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/5529.
Повний текст джерелаZiegler, Daniel (Daniel M. ). "Compiling Gallina to go for the FSCQ file system." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/113460.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 85-87).
Over the last decade, systems software verification has become increasingly practical. Many verified systems have been written in the language of a proof assistant, proved correct, and then made runnable using code extraction. However, due to the rigidity of extraction and the overhead of the target languages, the resulting code's CPU performance can suffer, with limited opportunity for optimization. This thesis contributes CoqGo, a proof-producing compiler from Coq's Gallina language to Go. We created Go', a stylized semantics of Go which enforce linearity, and implemented proof-producing compilation tactics from Gallina to Go' plus a straightforward translation from Go' to Go. Applying a prototype of CoqGo, we compiled a system call in the FSCQ file system, with minimal changes to FSCQ's source code. Taking advantage of the increased control given by CoqGo, we implemented three optimizations, bringing the system call's CPU performance to 19% faster than the extracted version.
by Daniel Ziegler.
M. Eng.
Matchett, Michael William. "Resolution of enantiomers using cyclodextrins in HPLC, FSCE and NMR." Thesis, University of Bath, 1996. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.307070.
Повний текст джерелаHeinrich, Bernd. "Auswirkungen der FSC-Zertifizierung auf die Waldrestholzbereitstellung." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-202319.
Повний текст джерелаAli, Khaled Yousif. "Friction Stir Welding Between Similar and Dissimilar Materials." Wright State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=wright1513857047779233.
Повний текст джерелаKarlsson, Alexandra. "Attityder till certifieringssystemen FSC och PEFC i skogsbranschen." Thesis, Linnéuniversitetet, Institutionen för biologi och miljö (BOM), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-38481.
Повний текст джерелаOlika grupper i skogsbranschen riskerar att ha olika syn när det gäller ansvaret för ett miljömässigt hållbart skogsbruk och nyttan med certifiering och den här studien gjordes för att undersöka vilka inställningar som fanns i skogsbranschen till certifieringssystemen FSC och PEFC. Arbetet gjordes med avseende på tre grupper: skogsägare, skogsentreprenörer och anställda som arbetar på skogsföretaget Södra med certifiering i sitt dagliga arbete. I studien skickades en enkät och ett frågeformulär ut. Undersökningen visade att de tre grupperna värderade miljömässigt hållbart skogsbruk med certifiering högt. Som skogsägare fick man en certifieringspremie för det certifierade virke som man sålde. Skogsägarna såg också en ekonomisk vinning med certifiering. Skogsentreprenörerna ansåg att certifiering i högre grad gav ordning och reda i deras arbete men att det fanns en ekonomisk kostnad med att vara certifierad. Skogsföretagsgruppen menade att certifierade produkter gav tillgång till en större marknad för skogsföretaget. Grupperna var överens om att ansvaret för ett miljömässigt hållbart skogsbruk låg på de/den som ägde skogsmarken. Samtidigt uppskattade hälften av skogsägarna att deras kunskaper om certifieringarna var otillräckliga medan skogsentreprenörerna och skogsföretagsgruppen ansåg att deras kunskaper var tillräckliga. Detta kunde bero på att skogsägarna fick mindre utbildning av certifiering än de andra två grupperna. Det här arbetet har visat att grupperna inte har olika syn när det gäller vikten av att ett miljömässigt hållbart skogsbruk bedrivs.
Reese, Gregory A. "Dissimilar Friction Stir Welding Between Magnesium and Aluminum Alloys." Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc955097/.
Повний текст джерелаReilly, Aidan. "Modelling of friction stir spot welding." Thesis, University of Cambridge, 2013. https://www.repository.cam.ac.uk/handle/1810/244946.
Повний текст джерелаКниги з теми "FSCW"
Mubiayi, Mukuna Patrick, Esther Titilayo Akinlabi, and Mamookho Elizabeth Makhatha. Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW). Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-92750-3.
Повний текст джерелаCouncil, Field Studies. FSC overseas experiences in 2003. Shrewsbury: FSC, 2003.
Знайти повний текст джерелаServices, Information Handling, ed. FSC/locator code conversion tables. Englewood, Col: Information Handling Services, 1987.
Знайти повний текст джерелаS, Oca Bernardo, ed. The Andrew B. Gonzalez, FSC reader. Malate, Manila, Philippines: De La Salle University Press, 1996.
Знайти повний текст джерелаSalm, Luke. Brother Arnold Rèche, FSC, apostolic ascetic. Romeoville, Ill. (100 De La Salle Dr., Romeoville 60441-1896): Christian Brothers Publications, 1986.
Знайти повний текст джерелаNew York (State). Legislature. Legislative Commission on the Modernization and Simplification of Tax Administration and the Tax Law. The New York tax treatment of DISCs and FSCs. [Albany]: The Commission, 1986.
Знайти повний текст джерелаSalm, Luke. Brother Benilde Romançon, FSC: The teacher saint. Romeoville, Ill. (100 De La Salle Dr., Romeoville, Ill. 60441-1896): Christian Brothers Publications, 1987.
Знайти повний текст джерелаMalaysian FSC Consultative Study Working Group., ed. Forest stewardship council (FSC): Malaysian consultative study : report. Petaling Jaya, Selangor, Malaysia: WWF Malaysia, 1993.
Знайти повний текст джерелаSalm, Luke. Brother Mutien-Marie Wiaux, FSC: Sanctity in simplicity. Romeoville, Ill. (100 De La Salle Dr., Romeoville 60441-1896): Christian Brothers Publications, 1989.
Знайти повний текст джерелаKirby, Leo. Brother Charles Henry Buttimer, FSC: Superior general, 1966-1976. Romeoville, Ill. (100 De La Salle Dr., Romeoville 60441-1896): Christian Brothers Publications, 1985.
Знайти повний текст джерелаЧастини книг з теми "FSCW"
Issakov, Vadim. "FSCW Radar." In Microwave Circuits for 24 GHz Automotive Radar in Silicon-based Technologies, 189–90. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13598-9_10.
Повний текст джерелаGooch, Jan W. "FSCT." In Encyclopedic Dictionary of Polymers, 328. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_5333.
Повний текст джерелаKok, L. J. J., Ken Poston, and Gary Moore. "Bombardier Aerospace FSW Demonstrator." In ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives, 73–81. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1664-3_5.
Повний текст джерелаSantos, Telmo G., Jorge Martins, Luis Mendes, and Rosa M. Miranda. "Process Developments in FSW." In Proceedings of the Eighth International Conference on Management Science and Engineering Management, 1015–21. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-55122-2_88.
Повний текст джерелаLiu, Xiaojun. "Forward-scattered Light (FSC)." In Encyclopedia of Systems Biology, 757. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4419-9863-7_1082.
Повний текст джерелаMishra, Rajiv Sharan, Partha Sarathi De, and Nilesh Kumar. "FSW of Aluminum Alloys." In Friction Stir Welding and Processing, 109–48. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07043-8_5.
Повний текст джерелаRaut, Niyati N., Vivek Yakkundi, Akshay Vartak, and S. N. Teli. "Effect of Plunging and Dwelling Period on Temperature Profile and Energy Dissipation in FSSW and Its Relevance in FSW." In Proceedings of International Conference on Intelligent Manufacturing and Automation, 211–20. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4485-9_22.
Повний текст джерелаFraisse, Mateo Cariño. "FSC® forest management auditing." In Forest Management Auditing, 187–200. Milton Park, Abingdon, Oxon ; New York, NY : Routledge, 2018.: Routledge, 2018. http://dx.doi.org/10.4324/9781315745985-13.
Повний текст джерелаFlorian, Diego, Ilaria Dalla Vecchia, and Mauro Masiero. "FSC® Forest Management Certification." In Forest Management Auditing, 81–92. Milton Park, Abingdon, Oxon ; New York, NY : Routledge, 2018.: Routledge, 2018. http://dx.doi.org/10.4324/9781315745985-6.
Повний текст джерелаMeyghani, Bahman, and Mokhtar Awang. "Finite Element Modeling of FSW." In Welding Simulations Using ABAQUS, 7–12. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1320-4_3.
Повний текст джерелаТези доповідей конференцій з теми "FSCW"
Korszeń, Karol, and Jarosław Dawidczyk. "Algorithms for data processing in FSCW systems." In SPIE Proceedings, edited by Ryszard S. Romaniuk. SPIE, 2007. http://dx.doi.org/10.1117/12.784847.
Повний текст джерелаWu, Zhanchuan, Ying Fan, Honghui Wen, and Dawei Gao. "Vibration Suppression of FSCW-IPM with Auxiliary Slots." In 2018 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2018. http://dx.doi.org/10.1109/ecce.2018.8557390.
Повний текст джерелаWang, Aimeng, and Yi Tian. "A Method for Improving Torque Density in FSCW PM Machines." In 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF). IEEE, 2019. http://dx.doi.org/10.1109/isef45929.2019.9097070.
Повний текст джерелаKim, Nam-Ho, Chan-Ho Kim, Tae-Hyuk Ji, Yong-Jae Kim, and Sang-Yong Jung. "Axial Flux Permanent Magnet FSCW Machine Decoupling Unbalance Magnetic Force." In 2021 24th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2021. http://dx.doi.org/10.23919/icems52562.2021.9634454.
Повний текст джерелаWang, Aimeng, and Dashuang Li. "Investigation of Coil Pitch Types in FSCW Interior PM Synchronous Machine." In 2021 13th International Symposium on Linear Drives for Industry Applications (LDIA). IEEE, 2021. http://dx.doi.org/10.1109/ldia49489.2021.9505864.
Повний текст джерелаDajaku, Gurakuq, Sachar Spas, Xhevat Dajaku, and Dieter Gerling. "Comparison of two FSCW PM machines for integrated traction motor/generator." In 2015 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2015. http://dx.doi.org/10.1109/iemdc.2015.7409058.
Повний текст джерелаDajaku, Gurakuq, Volodymyr Bilyi, and Dieter Gerling. "Feasibility analysis of an improved FSCW for synchronous reluctance traction machines." In 2017 IEEE International Electric Machines and Drives Conference (IEMDC). IEEE, 2017. http://dx.doi.org/10.1109/iemdc.2017.8002041.
Повний текст джерелаZhang, Hui, Oskar Wallmark, and Mats Leksell. "On fault tolerance for IPM-FSCW machines adopting a modular converter." In 2014 17th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2014. http://dx.doi.org/10.1109/icems.2014.7013739.
Повний текст джерелаCarrasco, Maitane, Amaia Lopez-de-Heredia, and Irma Villar. "Comparison of Fault-tolerant control strategies for a nine-phase IPMSM-FSCW." In 2020 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE, 2020. http://dx.doi.org/10.1109/vppc49601.2020.9330941.
Повний текст джерелаWang, Aimeng, and Shengjun Wei. "Improved Sliding Mode Control of FSCW PM Machine for Electric Vehicle Application." In 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF). IEEE, 2019. http://dx.doi.org/10.1109/isef45929.2019.9097068.
Повний текст джерелаЗвіти організацій з теми "FSCW"
Gehler, Christopher P. Unity of Effort: Crisis Beyond the FSCL. Fort Belvoir, VA: Defense Technical Information Center, May 1999. http://dx.doi.org/10.21236/ada381939.
Повний текст джерелаMarshall, David B. Reducing Fracture Tendencies in PCBN FSW Tools. Fort Belvoir, VA: Defense Technical Information Center, August 2009. http://dx.doi.org/10.21236/ada504865.
Повний текст джерелаMarshall, David. Reducing Fracture Tendencies in PCBN FSW Tools. Fort Belvoir, VA: Defense Technical Information Center, July 2010. http://dx.doi.org/10.21236/ada524909.
Повний текст джерелаHall, Dewayne P. Integrating Joint Operations Beyond the FSCL. Is Current Doctrine Adequate? Fort Belvoir, VA: Defense Technical Information Center, November 1997. http://dx.doi.org/10.21236/ada335397.
Повний текст джерелаBarry, II, and Robert F. Who's Zooming Who? Joint Doctrine and the Army; Air Force Debate Over the FSCL. Fort Belvoir, VA: Defense Technical Information Center, May 1994. http://dx.doi.org/10.21236/ada284070.
Повний текст джерелаBorg, Lars E., Zurong Dai, Gary R. Eppich, Amy M. Gaffney, Victoria G. Genetti, Patrick M. Grant, Leonard W. Gray, et al. Analysis of a Uranium Oxide Sample Interdicted in Slovakia (FSC 12-3-1). Office of Scientific and Technical Information (OSTI), January 2014. http://dx.doi.org/10.2172/1124874.
Повний текст джерелаCIFOR. Evaluasi dampak sertifikasi Forest Stewardship Council (FSC) terhadap pengelolaan hutan alam di daerah tropis. Center for International Forestry Research (CIFOR), 2013. http://dx.doi.org/10.17528/cifor/004347.
Повний текст джерелаFothergill, David. Surface and 60 FSW Performance Testing of the Modified MBS 2000 Closed Circuit Oxygen Rebreather. Fort Belvoir, VA: Defense Technical Information Center, March 2007. http://dx.doi.org/10.21236/ada465121.
Повний текст джерелаSwiergosz, M. J., and R. J. Steckel. Limited Unmanned Evaluation of the DIVEX SLS MK IV Backpack at Sea Level and 1000 FSW. Fort Belvoir, VA: Defense Technical Information Center, April 2005. http://dx.doi.org/10.21236/ada443528.
Повний текст джерелаKerce, Elyse W. Taylor-Leaver FSC (Family Service Center): A Prototype for Program Evaluation of Navy Family Service Centers. Fort Belvoir, VA: Defense Technical Information Center, August 1988. http://dx.doi.org/10.21236/ada197536.
Повний текст джерела