Добірка наукової літератури з теми "Friction"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Friction".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Friction"
Evans, Philip. "Friction on Frictions." Physiotherapy 78, no. 12 (December 1992): 930. http://dx.doi.org/10.1016/s0031-9406(10)60511-1.
Повний текст джерелаZhu, Zongxiao, Hui Wang, Zixuan Qiang, Shi Jiao, Linjun Wang, Min Zheng, Shengyu Zhu, Jun Cheng, and Jun Yang. "Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating." Coatings 11, no. 8 (July 26, 2021): 896. http://dx.doi.org/10.3390/coatings11080896.
Повний текст джерелаLi, Jing-Ming, Hai-Jun Wei, Li-Dui Wei, Da-Ping Zhou, and Ye Qiu. "Extraction of Frictional Vibration Features with Multifractal Detrended Fluctuation Analysis and Friction State Recognition." Symmetry 12, no. 2 (February 11, 2020): 272. http://dx.doi.org/10.3390/sym12020272.
Повний текст джерелаQiao, Yu Lin, Shan Lin Yang, Yan Zang, and Xin Yu Dong. "Effects of Ultrasonic Vibration on Tribological Properties of GCr15/45# Steel Frictional Pairs in Lubricated Sliding Conditions under Various Friction Speed." Advanced Materials Research 338 (September 2011): 599–602. http://dx.doi.org/10.4028/www.scientific.net/amr.338.599.
Повний текст джерелаFang, Kun. "Frictional Performance of Polyphenyl Ester Modified Polytetrafluoroethylene." Materials Science Forum 1080 (January 30, 2023): 33–39. http://dx.doi.org/10.4028/p-g7gf9i.
Повний текст джерелаWang, Tian Guo, X. Y. Liu, and J. J. Hua. "Investigation on the Fabrication and Properties of the Cu Base Friction Composites." Materials Science Forum 984 (April 2020): 125–30. http://dx.doi.org/10.4028/www.scientific.net/msf.984.125.
Повний текст джерелаZhang, Zijian, Guangwu Zhou, Peng Li, Luole Du, and Min He. "Research on the Vibration Behavior of Ring–Block Friction Pair Made of Materials of Water-Lubricated Rubber Bearing under Special Operating Conditions." Applied Sciences 13, no. 13 (June 28, 2023): 7676. http://dx.doi.org/10.3390/app13137676.
Повний текст джерелаFang, Shanglong, Wei Xiao, Kewen Chen, and Xuding Song. "Research on the Model for the Friction Coefficient of Resin-Based Friction Material and Its Experimental Verification." Materials 16, no. 13 (July 3, 2023): 4791. http://dx.doi.org/10.3390/ma16134791.
Повний текст джерелаBates, Jo. "The politics of data friction." Journal of Documentation 74, no. 2 (March 12, 2018): 412–29. http://dx.doi.org/10.1108/jd-05-2017-0080.
Повний текст джерелаJang, Siyoul. "Manipulating Frictional Performance of Wet Clutch Engagement through Material Properties and Operating Conditions." Lubricants 10, no. 9 (September 19, 2022): 225. http://dx.doi.org/10.3390/lubricants10090225.
Повний текст джерелаДисертації з теми "Friction"
Ledezma, Rodríguez Javier Andre. "Technology progress, credit market frictions and labor market friction." Tesis, Universidad de Chile, 2014. http://www.repositorio.uchile.cl/handle/2250/117059.
Повний текст джерелаEste trabajo modela la interacción entre progreso tecnológico (PT), fricciones en el mercado laboral y fricciones en el mercado del crédito, con el objetivo de estudiar cómo la respuesta del mercado laboral frente al aumento del PT se encuentra mediada por el grado de desarrollo del mercado del crédito. La hipótesis principal apunta al hecho que economías con fricciones en el mercado del crédito responden de manera diferente al PT que aquellas economías sin fricciones en dicho mercado, lo que determinaría finalmente el efecto sobre el mercado laboral. Acemoglu (2001) plantea que un mecanismo de este estilo podría servir como explicación alternativa al milagro del empleo en EEUU respecto a Europa durante la década del 80. Con este propósito se desarrolla un modelo teórico de búsqueda para modelar las imperfecciones en ambos mercados, siguiendo el esquema propuesto por Pissarides (1998), aplicado en etapas sucesivas como en Wasmer y Weil (2004). En el modelo, un empresario sigue tres etapas antes de iniciar la producción de su idea de negocio: i) Recauda los fondos necesarios desde el mercado del crédito que le permita iniciar su empresa; ii) Busca un trabajador en el mercado laboral para iniciar la producción de la firma y iii) Produce el bien, el que luego se transa en un mercado de bienes competitivos. Debido a las fricciones, las dos primeras etapas toman tiempo y necesitan recursos. Cuando se inicia la producción, la firma adquiere la tecnología más avanzada disponible cuya productividad es la más alta de la economía. Esta productividad se mantiene constante hasta que el empresario decide adoptar una nueva tecnología con mayor productividad, lo que implica la destrucción de la relación laboral, y también en este modelo, la destrucción de la relación de préstamo. Los principales hallazgos muestran que a medida que crece el PT el valor del trabajo para un empresario disminuye al igual que su vida útil, no obstante, existen dos posibles efectos sobre la congestión de equilibrio del mercado laboral y sobre el desempleo. El sentido de estos efectos depende del costo total involucrado en el proceso de abrir una vacante, el que a su vez se relaciona con las fricciones del mercado del crédito. Un aumento del PT en economías donde el costo total asociado a abrir vacantes es menor que la pérdida del valor del trabajo asociado al PT, incentiva al empresario a destruir las actuales relaciones de trabajo y préstamo, disminuyendo la congestión del mercado laboral. De esta manera, en equilibrio, un aumento del PT induciría mayor reasignación laboral y mayor desempleo. No obstante, economías donde abrir una vacante es un proceso costoso mayor a la pérdida del valor de un trabajo asociada al aumento en el PT, los empresarios prefieren mantener la firma en producción hasta que sea rentable y evitan la transición al mercado del crédito. En equilibrio, la congestión del mercado laboral aumenta y existe una mayor reasignación laboral, sin embargo, el efecto sobre el desempleo depende si el efecto positivo del PT en la congestión de mercado laboral supera, o no, a una fracción del efecto negativo que el PT tiene sobre la vida óptima del trabajo. Respecto a la eficiencia del mercado del crédito, entendida como la habilidad de unir a prestamistas con prestatarios, una economía con una alta probabilidad de encuentro entre estos agentes, presenta menores tiempos de vida de las relaciones de trabajo y una mayor congestión de equilibrio del mercado laboral. Lo primero, dado que encontrar financiamiento se hace más probable, mientras que lo segundo ocurre ya que en equilibrio se ofrecerán más vacantes en busca de trabajadores. No obstante, el efecto sobre el desempleo depende de cómo se balancean estas fuerzas.
Stratton, Daryl A. "Characterizing the Frictional Interface in Friction Stir Welding." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1757.pdf.
Повний текст джерелаOmam, Alan Frederic. "Internal friction." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Знайти повний текст джерелаRoa, Julio Alberto. "Evaluation of International Friction Index and High-Friction Surfaces." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/36277.
Повний текст джерелаMaster of Science
Hu, Yuan. "Friction-Stir Riveting: Mechanical Testing of Friction-Stir Riveting." University of Toledo / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1430393133.
Повний текст джерелаREDDA, BOYNA ROHITH. "IMPACT OF FRICTION TEST SCALE ON BRAKE FRICTION PERFORMANCE." OpenSIUC, 2016. https://opensiuc.lib.siu.edu/theses/2051.
Повний текст джерелаKietzig, Anne-Marie. "Microscopic ice friction." Thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/23322.
Повний текст джерелаChou, Danielle 1981. "Dahl friction modeling." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/32826.
Повний текст джерелаIncludes bibliographical references (p. 22).
The drive behind improved friction models has been better prediction and control of dynamic systems. The earliest model was of classical Coulomb friction; however, the discontinuity during force reversal of the Coulomb friction model has long been a point of contention since such a discontinuity does not accurately portray the behavior of real systems. Other models have been suggested, but variations of the Dahl solid friction model remain some of the simplest yet most useful. Dahl's original theory proposed that friction behaved as a stress acting upon the quantum mechanical bonds at the interface. Thus, the relationship between frictional force and position would be analogous to a stress-strain curve, complete with hysteresis should there be permanent displacement akin to plastic deformation in materials. This project reviews the variations of Dahl friction models popular in the literature and then demonstrates it both analytically via Matlab and Simulink simulations and experimentally by observing the behavior of a limited angle torque motor.
by Danielle Chou.
S.B.
Gerde, Eric Stendahl. "Fracture and friction /." Full text (PDF) from UMI/Dissertation Abstracts International, 2001. http://wwwlib.umi.com/cr/utexas/fullcit?p3008334.
Повний текст джерелаQuignon, Benoit. "Investigations of the frictional behaviour of nanotextured surfaces by friction force microscopy." Thesis, University of Bristol, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.685551.
Повний текст джерелаКниги з теми "Friction"
Hunter, Samantha. Friction. Toronto, Ontario: Harlequin, 2010.
Знайти повний текст джерелаFrank, E. R. Friction. New York: Atheneum Books for Young Readers, 2003.
Знайти повний текст джерелаMullins, Matt. Friction. New York: Children's Press, 2012.
Знайти повний текст джерелаBateman, Claire. Friction. Portland, Or: Eighth Mountain Press, 1998.
Знайти повний текст джерелаSpilsbury, Louise. Friction. London: Evans, 2007.
Знайти повний текст джерелаHewitt, Sally. Friction. North Mankato, MN: Stargazer Books, 2007.
Знайти повний текст джерелаE, Fitz Ezra, ed. Friction. Champaign, Ill: Dalkey Archive Press, 2010.
Знайти повний текст джерелаPersson, Bo N. J. Sliding Friction. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-04283-0.
Повний текст джерелаBesdo, Dieter, Bodo Heimann, Manfred Klüppel, Matthias Kröger, Peter Wriggers, and Udo Nackenhorst, eds. Elastomere Friction. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-10657-6.
Повний текст джерелаYilbas, Bekir Sami, and Ahmet Z. Sahin. Friction Welding. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-54607-5.
Повний текст джерелаЧастини книг з теми "Friction"
Ghiotti, Andrea. "Friction." In CIRP Encyclopedia of Production Engineering, 1–6. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-642-35950-7_16825-1.
Повний текст джерелаArnell, R. D., P. B. Davies, J. Halling, and T. L. Whomes. "Friction." In Tribology, 27–65. London: Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-21387-0_2.
Повний текст джерелаMuvdi, Bichara B., Amir W. Al-Khafaji, and J. W. McNabb. "Friction." In Statics for Engineers, 537–628. New York, NY: Springer New York, 1997. http://dx.doi.org/10.1007/978-1-4612-1922-4_9.
Повний текст джерелаArnell, R. D., P. B. Davies, J. Halling, and T. L. Whomes. "Friction." In Tribology, 27–65. New York, NY: Springer New York, 1991. http://dx.doi.org/10.1007/978-1-4684-8974-3_2.
Повний текст джерелаMatsuo, Yoshihiro, Daryl D. Clarke, and Shinichi Ozeki. "Friction." In Phenolic Resins: A Century of Progress, 345–61. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-04714-5_14.
Повний текст джерелаStraffelini, Giovanni. "Friction." In Springer Tracts in Mechanical Engineering, 21–60. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-05894-8_2.
Повний текст джерелаDickson, Peter. "Friction." In Non-Shock Initiation of Explosives, 537–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-87953-4_9.
Повний текст джерелаEmri, Igor, and Arkady Voloshin. "Friction." In Statics, 489–562. New York, NY: Springer New York, 2016. http://dx.doi.org/10.1007/978-1-4939-2101-0_12.
Повний текст джерелаBriscoe, B. J., and S. K. Sinha. "Friction." In Polymer Science and Technology Series, 102–8. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-015-9231-4_23.
Повний текст джерелаBhushan, Bharat. "Friction." In Tribology and Mechanics of Magnetic Storage Devices, 231–365. New York, NY: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4684-0335-0_4.
Повний текст джерелаТези доповідей конференцій з теми "Friction"
Xu, Y., and K. L. Yung. "Forms of Static Friction, Sliding Friction and Rolling Friction." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64050.
Повний текст джерелаVaccaro, R. J. "Friction compensation without a friction model." In 2012 American Control Conference - ACC 2012. IEEE, 2012. http://dx.doi.org/10.1109/acc.2012.6315497.
Повний текст джерелаLi, J., F. Lu, P. Zhao, R. Chen, and Y. Lin. "Impact friction test for friction materials." In DYMAT 2009 - 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. Les Ulis, France: EDP Sciences, 2009. http://dx.doi.org/10.1051/dymat/2009033.
Повний текст джерелаKAZACHKOV, A., YU POPKOV, E. SAVCHENKO, L. DIMITROVA, and I. ANIKEEVA. "SCIENCE FRICTION." In Proceedings of the International Conference on Physics Education in Cultural Contexts. WORLD SCIENTIFIC, 2004. http://dx.doi.org/10.1142/9789812702890_0045.
Повний текст джерелаGoguey, Alix, Deepak Ranjan Sahoo, Simon Robinson, Jennifer Pearson, and Matt Jones. "Pulp Friction." In CHI '19: CHI Conference on Human Factors in Computing Systems. New York, NY, USA: ACM, 2019. http://dx.doi.org/10.1145/3290605.3300871.
Повний текст джерелаMejtoft, Thomas, Sarah Hale, and Ulrik Söderström. "Design Friction." In ECCE 2019: 31st European Conference on Cognitive Ergonomics. New York, NY, USA: ACM, 2019. http://dx.doi.org/10.1145/3335082.3335106.
Повний текст джерелаPapadopoulos, Despina, Otto von Busch, Erik Sandelin, and Magnus Torstensson. "Science friction." In the 2004 conference. New York, New York, USA: ACM Press, 2004. http://dx.doi.org/10.1145/1013115.1013183.
Повний текст джерелаMELIKIDZE, AKAKII. "QUANTUM FRICTION." In Proceedings of the XVIII Lisbon Autumn School. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811455_0019.
Повний текст джерелаTucker, Kristen M., and Paul M. McElfresh. "Could Emulsified Friction Reducers Prevent Robust Friction Reduction?" In SPE International Symposium and Exhibition on Formation Damage Control. Society of Petroleum Engineers, 2014. http://dx.doi.org/10.2118/168115-ms.
Повний текст джерелаZhu, Y. Elaine, and Steve Granick. "What Causes Low Friction? — What Causes High Friction?" In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64173.
Повний текст джерелаЗвіти організацій з теми "Friction"
Henein, N. A. Instantaneous engine frictional torque, its components and piston assembly friction. Edited by F. A. Nichols. Office of Scientific and Technical Information (OSTI), May 1992. http://dx.doi.org/10.2172/6857779.
Повний текст джерелаBlau, P. J. Friction microprobe investigation of particle layer effects on sliding friction. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/7188137.
Повний текст джерелаLever, James, Susan Taylor, Garrett Hoch, and Charles Daghlian. Evidence that abrasion can govern snow kinetic friction. Engineer Research and Development Center (U.S.), December 2021. http://dx.doi.org/10.21079/11681/42646.
Повний текст джерелаArmstrong, Steven E. Fratricide: Fact or Friction? Fort Belvoir, VA: Defense Technical Information Center, May 1999. http://dx.doi.org/10.21236/ada370683.
Повний текст джерелаMarks, Laurence D. Friction in Full View. Fort Belvoir, VA: Defense Technical Information Center, May 2010. http://dx.doi.org/10.21236/ada523369.
Повний текст джерелаJewsbury, P. The WAFTER (Wear and Friction Tester): A Versatile Wear and Friction Tester. Fort Belvoir, VA: Defense Technical Information Center, June 1987. http://dx.doi.org/10.21236/ada187596.
Повний текст джерелаNichols, F. A., and N. A. Henein. Instantaneous engine frictional torque, its components and piston assembly friction. Final report. Office of Scientific and Technical Information (OSTI), May 1992. http://dx.doi.org/10.2172/10146148.
Повний текст джерелаManley, Paul R. Chaos, Clausewwitz, Friction and Command. Fort Belvoir, VA: Defense Technical Information Center, November 1998. http://dx.doi.org/10.21236/ada442708.
Повний текст джерелаFeng, Zhili, Yong Chae Lim, Murray Mahoney, Samuel Sanderson, Steve Larsen, Russel Steel, Dale Fleck, et al. Flexible Friction Stir Joining Technology. Office of Scientific and Technical Information (OSTI), July 2015. http://dx.doi.org/10.2172/1210157.
Повний текст джерелаGabbey, D. J., J. Lee, and D. J. Patterson. CAM/LIFTER forces and friction. Office of Scientific and Technical Information (OSTI), February 1992. http://dx.doi.org/10.2172/5705342.
Повний текст джерела