Добірка наукової літератури з теми "FMFC"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "FMFC".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "FMFC"

1

Kubota, Wataru, Dang Trang Nguyen, and Kozo Taguchi. "The Effectiveness of TiO2-Loaded Air-Cathode in a Floating Microbial Fuel Cell." Key Engineering Materials 896 (August 10, 2021): 67–71. http://dx.doi.org/10.4028/www.scientific.net/kem.896.67.

Повний текст джерела
Анотація:
This study shows the effectiveness of titanium dioxide (TiO₂) on a floating microbial fuel cell (FMFC). In the experiment, when a UV cutoff filter attached halogen lamp was used, the power density of the FMFC using pristine TiO₂ (P25) and the FMFC using TiO₂ sintered at 650 °C were was 2.11mW/m2 and 10.44 mW/m2 respectively. Next, when measured without UV cutoff filter, pristine TiO₂ type FMFC and 650°C sintered TiO₂ type FMFC recorded 2.93 mW/m2 and 11.93 mW/m2 respectively. From this result, it was confirmed that the power density was improved up to five times when the UV cutoff filter was used and four times when it was not used. According to the results of X-ray Diffraction (XRD), 650°C sintered TiO₂ is composed of more rutile phase than pristine TiO₂.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Chiliza, Nompumelelo, Samson Adeoluwa Adewumi, and Bhekabantu Ntshangase. "“Fees Must Fall Campaign” in Higher Institutions of Learning: Understanding Staff Perceptions in University of KwaZulu-Natal, South Africa." International Journal of Social Science Research and Review 5, no. 10 (October 4, 2022): 130–41. http://dx.doi.org/10.47814/ijssrr.v5i10.522.

Повний текст джерела
Анотація:
Three South-African Universities, including University of KwaZulu-Natal (UKZN), constantly witnessed students’ protests because of yearly increment in tuition fees. In 2015/2016, an announcement of 10.5% tuition fee increment incited an even higher level of protests among students. Research on the perception of the impact of fees must fall campaign (FMFC), especially among university staff, remains minimal to date. The purpose of this study is to analyse the impact of the FMFC on the perception of academic staff of the University of KwaZulu-Natal. Staff perceptions contribute significantly to the success and failure of the university or any organization. Data were elicited through a qualitative approach, using in-depth interviews. The target population for this study were academic staff sampled from UKZN. A total of 20 academic staff were recruited with the convenient sampling approach. The NVivo (v.12) qualitative software was employed for the identification of themes and sub-themes while the content qualitative analytical tool was employed to make sense of the themes. The results of the study showed that the #FMFC decreased the quality of education; lectures were suspended for days; and the #FMFC caused disruption on campus for a substantial numbers of times. Concerns were also that the image of the university had been negatively affected, and they felt unsafe. The study recommend the need for the injection of more funds through scholarship and bursary to cushion the effect of the increase in tuition fees, especially for the less-privileged students in order to tame the tide of consistent #FMFC protests.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Zhang, Wenjuan, Yinping Miao, Hongmin Zhang, and Jianquan Yao. "Low-concentration antibiotic detection in water based on enhanced photothermal effect." Applied Physics Letters 121, no. 5 (August 1, 2022): 051102. http://dx.doi.org/10.1063/5.0098034.

Повний текст джерела
Анотація:
Streptomycin sulfate (STS) is a broad-spectrum antibiotic widely present in water as a source of pollution. STS produces ototoxicity and nephrotoxicity if ingested in excess. Here, we propose a photothermal sensor to detect contaminated water based on a Nb2CTx MXene integrated few-mode fiber coupler (FMFC) and the photothermal effect of STS. Nb2CTx MXene exhibits strong absorption ability for biomolecules, which can enhance the interaction between STS and light by depositing it on the surface of the FMFC, thereby improving the detection performance of the proposed sensor. Under irradiation of a 405 nm laser, the photon energy is absorbed by STS and converted into heat energy, changing the transmission characteristics of the few-mode fiber. The results show that the sensitivity reaches 210.66 nm/(mg/ml) in the linear range of 0.02–0.1 mg/ml, with a detection limit of 94.93 ng/ml. In practical applications, the photothermal effect is stimulated by natural light to improve the suitability of the device application. Furthermore, this photothermal sensor eliminates complicated sample processing, making it potentially applicable for real-time food safety, environmental pollutant detection, and disease diagnosis.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zheng, Hou, Sun, Li, Hong, Ma, Li, Li, Fan, and Qiao. "Optimal Estimation Retrieval of Aerosol Fine-Mode Fraction from Ground-Based Sky Light Measurements." Atmosphere 10, no. 4 (April 11, 2019): 196. http://dx.doi.org/10.3390/atmos10040196.

Повний текст джерела
Анотація:
In this paper, the feasibility of retrieving the aerosol fine-mode fraction (FMF) from ground-based sky light measurements is investigated. An inversion algorithm, based on the optimal estimation (OE) theory, is presented to retrieve FMF from single-viewing multi-spectral radiance measurements and to evaluate the impact of utilization of near-infrared (NIR) measurements at a wavelength of 1610 nm in aerosol remote sensing. Self-consistency tests based on synthetic data produced a mean relative retrieval error of 4.5%, which represented the good performance of the OE inversion algorithm. The proposed algorithm was also performed on real data taken from field experiments in Beijing during a haze pollution event. The correlation coefficients (R) for the retrieved aerosol volume fine-mode fraction (FMFv) and optical fine-mode fraction (FMFo) against AErosol RObotic NETwork (AERONET) products were 0.94 and 0.95 respectively, and the mean residual error was 4.95%. Consequently, the inversion of FMFv and FMFo could be well constrained by single-viewing multi-spectral radiance measurement. In addition, by introducing measurements of 1610 nm wavelength into the retrieval, the validation results showed a significant improvement in the R value for FMFo (from 0.89–0.94). These results confirm the high value of NIR measurements for the retrieval of coarse mode aerosols.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Pei, Li, Yanbiao Chang, Jianshuai Wang, Jingjing Zheng, Tigang Ning, Jing Li, Bing Bai, Lei Shen, and Li Zhong. "Fiber Residual Stress Effects on Modal Gain Equalization of Few-Mode Fiber Amplifier." Sensors 23, no. 5 (February 25, 2023): 2574. http://dx.doi.org/10.3390/s23052574.

Повний текст джерела
Анотація:
The modal gain equalization (MGE) of few-mode fiber amplifiers (FMFAs) ensures the stability of signal transmission. MGE mainly relies on the multi-step refractive index (RI) and doping profile of few-mode erbium-doped fibers (FM-EDFs). However, complex RI and doping profiles lead to uncontrollable residual stress variations in fiber fabrication. Variable residual stress apparently affects MGE due to its impacts on the RI. So, this paper focuses on the residual stress effects on MGE. The residual stress distributions of passive and active FMFs were measured using a self-constructed residual stress test configuration. As the erbium doping concentration increased, the residual stress of the fiber core decreased, and the residual stress of the active fibers was two orders of magnitude lower than that of the passive fiber. Compared with the passive FMF and the FM-EDFs, the residual stress of the fiber core completely transformed from tensile stress to compressive stress. This transformation led to an obvious smooth RI curve variation. The measurement values were analyzed with FMFA theory, and the results show that the differential modal gain of the FMFA increased from 0.96 to 1.67 dB as the residual stress decreased from 4.86 to 0.01 MPa.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Pontié, M., E. Jaspard, C. Friant, J. Kilani, A. Fix-Tailler, C. Innocent, D. Chery, et al. "A sustainable fungal microbial fuel cell (FMFC) for the bioremediation of acetaminophen (APAP) and its main by-product (PAP) and energy production from biomass." Biocatalysis and Agricultural Biotechnology 22 (November 2019): 101376. http://dx.doi.org/10.1016/j.bcab.2019.101376.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Missiame, Arnold, Patrick Irungu, and Rose Adhiambo Nyikal. "Gender-differentiated stochastic meta-frontier analysis of production technology heterogeneity among smallholder cassava farmers in Ghana." African Journal of Agricultural and Resource Economics 16, no. 2 (June 30, 2021): 140–54. http://dx.doi.org/10.53936/afjare.2021.16(2).10.

Повний текст джерела
Анотація:
This paper assesses the differences in technical efficiency of, and the cassava production systems employed by, male-managed (MMF) and female-managed (FMF) cassava farms in the Fanteakwa District of Ghana. The study employs the translog stochastic meta-frontier model to analyse data obtained from 300 randomly selected smallholder cassava farmers and finds an average metafrontier technical efficiency (MTE) of 0.06 and 0.03 among MMF and FMF respectively. The technology gap ratios (TGR) are 0.25 and 0.04 for the MMF and FMF respectively. The results suggest that both MMFs and FMFs are technically inefficient. However, the production technology operated on MMFs is relatively superior to that operated on FMFs, as shown by the relatively higher TGR for MMFs. The results also reveal that proximity to markets, extension access, off-farm economic activities and formal education are the major contributors to the technical efficiency of the farmers.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Usha Rani, M., and N. Saravana Selvam. "A Novel Disease Detection and Classification Method Using Improved Fusion Random Weight Support Vector Machine." Journal of Medical Imaging and Health Informatics 11, no. 12 (December 1, 2021): 2976–86. http://dx.doi.org/10.1166/jmihi.2021.3903.

Повний текст джерела
Анотація:
Health informatics is one of the main branch of engineering which provides a solution to a variety of problems like delayed, missed or incorrect diagnoses with the help of computational techniques. With the help of technologies such as bio-computing, health informatics, the disaster impacts on both human health and biological factors can be reduced to a large extend. Using these computational technologies, the country’s economy can also get boosted up and due to increased disease-causing pathogens, which directly impact the human health system. In this research work, a different type of sugarcane disease is detected and classified because manual identification is difficult and time-consuming. So, the farmers couldn’t find a better solution, than on the whole, they go for stubble burning, which is an alarming issue both on human and environmental wellness. The burning of bagasse causes bagassois, an interstitial lung disease that affects the tissues present in the lung through the air sacs. So, this sugarcane disease detection needs to be done early to avoid various health and environmental issues. The proposed work consists of the detection of four types of sugarcane leaf disease directly from the field. The sequence of methods is capturing images with WSN nodes, pre-processing with image enhancement and noise removal (IENR), segmentation with Fuzzy membership function and clustering (FMFC), feature extraction using Gray Level Co-occurrence Matrix Vector (GLCMV) and classification using Support Vector Machine (SVM). With the help of the effective proposed method, the highest parameters like precision, accuracy, sensitivity, and specificity for sugarcane leaf disease have been obtained. Based on the successful implementation process, the accuracy stated for the four sugarcane diseases along with the execution time is given below as Smut disease (87.12, 1.01 sec), Rust disease (90.23, 1.02 sec), Grassy Shoot disease (95.34, 1.047 sec), Red Rot disease (95.51, 1.04 sec).
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Seiffert, Alexander P., Adolfo Gómez-Grande, Alberto Villarejo-Galende, Marta González-Sánchez, Héctor Bueno, Enrique J. Gómez, and Patricia Sánchez-González. "High Correlation of Static First-Minute-Frame (FMF) PET Imaging after 18F-Labeled Amyloid Tracer Injection with [18F]FDG PET Imaging." Sensors 21, no. 15 (July 30, 2021): 5182. http://dx.doi.org/10.3390/s21155182.

Повний текст джерела
Анотація:
Dynamic early-phase PET images acquired with radiotracers binding to fibrillar amyloid-beta (Aβ) have shown to correlate with [18F]fluorodeoxyglucose (FDG) PET images and provide perfusion-like information. Perfusion information of static PET scans acquired during the first minute after radiotracer injection (FMF, first-minute-frame) is compared to [18F]FDG PET images. FMFs of 60 patients acquired with [18F]florbetapir (FBP), [18F]flutemetamol (FMM), and [18F]florbetaben (FBB) are compared to [18F]FDG PET images. Regional standardized uptake value ratios (SUVR) are directly compared and intrapatient Pearson’s correlation coefficients are calculated to evaluate the correlation of FMFs to their corresponding [18F]FDG PET images. Additionally, regional interpatient correlations are calculated. The intensity profiles of mean SUVRs among the study cohort (r = 0.98, p < 0.001) and intrapatient analyses show strong correlations between FMFs and [18F]FDG PET images (r = 0.93 ± 0.05). Regional VOI-based analyses also result in high correlation coefficients. The FMF shows similar information to the cerebral metabolic patterns obtained by [18F]FDG PET imaging. Therefore, it could be an alternative to the dynamic imaging of early phase amyloid PET and be used as an additional neurodegeneration biomarker in amyloid PET studies in routine clinical practice while being acquired at the same time as amyloid PET images.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Song, Hanlim, Wonbin Jung, Eulgi Lee, Ji-Young Park, Min Sun Kim, Min-Cheol Lee, and Hyoung-Ihl Kim. "Capsular stroke modeling based on somatotopic mapping of motor fibers." Journal of Cerebral Blood Flow & Metabolism 37, no. 8 (January 1, 2016): 2928–37. http://dx.doi.org/10.1177/0271678x16679421.

Повний текст джерела
Анотація:
Recently, several capsular stroke models have been reported with different targets of destruction. This study was performed to establish an accurate internal capsule (IC) target for capsular stroke modeling in rats. We injected adeno-associated virus serotype 5 (AAV)-CaMKII-EYFP into forelimb motor cortex and AAV-CaMKII-mCherry into hindlimb motor cortex (n = 9) to anterogradely trace the pyramidal fibers and map their somatotopic distribution in the IC. On the basis of the neural tracing results, we created photothrombotic infarct lesions in rat forelimb and hindlimb motor fiber (FMF and HMF) areas of the IC (n = 29) and assessed motor behavior using a forelimb-use asymmetry test, a foot-fault test, and a single-pellet reaching test. We found that the FMFs and HMFs were primarily distributed in the inferior portion of the posterior limb of the IC, with the FMFs located largely ventral to the HMFs but with an area of partial overlap. Photothrombotic lesions in the FMF area resulted in persistent motor deficits. In contrast, lesions in the HMF area did not result in persistent motor deficits. These results indicate that identification of the somatotopic distribution of pyramidal fibers is critical for accurate targeting in animal capsular stroke models: only infarcts in the FMF area resulted in long-lasting motor deficits.
Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "FMFC"

1

AHMED, DANIYAL. "Harvesting Energy from Microbial Fuel Cells and their Impedance Analysis." Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2740593.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Aissioui, Abdelkader. "Le chemin vers les architectures futures des services mobiles : du Follow Me Cloud (FMC) au Follow Me edge Cloud (FMeC)." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLV095.

Повний текст джерела
Анотація:
Les travaux décrits dans cette thèse de doctorat visent à traiter les futures architectures de fourniture de services mobiles basés sur le cloud, à travers l'évolution des infrastructures réseau partant de Mobile Cloud Computing (MCC) au Mobile Edge Computing (MEC). Nous nous sommes essentiellement concentrés sur le concept Follow Me Cloud (FMC) comme une nouvelle stratégie de fourniture de services pour une meilleure expérience utilisateur et une utilisation efficace des ressources. Cela permet aux services basés sur le cloud de "suivre" leurs utilisateurs mobiles au cours de leurs déplacements à travers les technologies de réseau d'accès, tout en fournissant le service basé sur le cloud via le point de service le plus optimal au sein de l'infrastructure cloud. Plusieurs contributions sont proposées dans cette thèse, avec des évaluations à la fois en analyse théorique et en simulation scientifique.Premièrement, nous avons proposé une architecture alternative FMC qui permet: (i) d'ouvrir la conception FMC sur les technologies d'accès réseau mobile non-3GPP (ii) d'assurer l'interopérabilité entre différents domaines PMIPv6 permettant au MN une itinérance inter-domaines PMIPv6 avec une mobilité IP transparente ainsi qu'une continuité de session de service.(iii) d'offrir une architecture sans tunnel dans les situations d'itinérance de MN, en évitant ainsi toute surcharge supplémentaire liée aux tunnels dans la gestion de la mobilité. Le schéma proposé exploite la technologie SDN/OpenFlow et le protocole de gestion de la mobilité PMIPv6 en les intégrant dans un unique framework permettant de réaliser la vision FMC.Deuxièmement, pour aborder les problèmes d'évolutivité et de résilience dans les architectures SDN/OpenFlow centralisées de plan de contrôle, nous avons introduit une nouvelle conception d'un contrôleur SDN élastique et distribué adapté pour MCC et plus particulièrement pour les systèmes de gestion FMC. Nous avons illustré comment le nouveau schéma de plan de contrôle est distribué sur une architecture hiérarchique à deux niveaux, un premier niveau avec un seul contrôleur SDN global et un second niveau avec plusieurs contrôleurs SDN locaux. Ensuite, nous avons présenté les éléments constitutifs de notre nouvel framework de plan contrôle, le calcul de l'indicateur de performance (KPI) du système, et nous avons fixé l'objectif clé de notre conception visant à maintenir la valeur KPI du système dans une fenêtre de seuil prédéfinie. Enfin, nous avons démontré comment cet objectif est atteint en adaptant dynamiquement le nombre et l'emplacement des contrôleurs SDN locaux en utilisant la technologie NFV pour provisionner les contrôleurs SDN en tant que instances VNF (fonction réseau virtuelle) dans le cloud.Troisièmement, nous avons introduit le concept FMeC, exploitant les capacités offertes par la combinaison des architectures MEC et FMC dans le but de satisfaire aux exigences des systèmes automobiles 5G. Nous avons commencé par définir les éléments clés du concept FMeC permettant de fournir la technologie FMC en bordure des réseaux mobiles. Ensuite, nous avons présenté une projection de notre solution FMeC sur un cas d'utilisation de conduite automatisée intégrant l'industrie automobile aux infrastructures Telecom en vue de la vision automobile 5G future. Avec une focalisation sur les types de communications V2I/N, nous avons présenté la conception de notre architecture FMeC basée sur les technologies SDN/OpenFlow et les entités de l'infrastructure MEC dont les ressources sont mises en commun pour fournir un cloud de bordure fédéré. Enfin, nous avons présenté notre framework sensible à la mobilité pour le placement des services dans le cloud de bordure, ce dernier est fondé sur un ensemble d'algorithmes de base qui permettent d'atteindre les exigences de QoS de la conduite automatisée en termes de latence ultra-courte au sein du réseau 5G
This Ph.D. thesis aims to deal with the future delivery architectures of mobile cloud-based services, through network infrastructures evolving from Mobile Cloud Computing (MCC) to Mobile Edge Computing (MEC). We mainly focused on Follow Me Cloud (FMC) concept as a new service delivery strategy for improved user experience and efficient resource utilization. That enables cloud-based services to follow their mobile users during their movement across access network technologies and by delivering the cloud-service via the optimal service point inside the cloud infrastructure. Several contributions are proposed in this thesis and evaluated in both theoretical analysis and scientific simulation.First, we proposed an alternative FMC architecture that allows: (i) to open the FMC design on non-3GPP mobile network access technologies (ii) to provide interoperability among different PMIPv6 domains permitting MNs inter-PMIPv6 domain roaming with seamless IP mobility and service session continuity (iii) to offer a tunnel-free architecture in MNs roaming situation, avoiding any additional overhead associated with tunneling in mobility management. This proposed scheme leverage SDN/OpenFlow technology and PMIPv6 mobility management protocol by integrating them within a framework permitting to realize the FMC vision.Second, to address the scalability and resiliency concerns in centralized SDN/OpenFlow control plane architecture, we introduced a new design of an elastic distributed SDN controller tailored for Mobile Cloud Computing (MCC) and more notably for Follow Me Cloud (FMC) management systems. We illustrated how the new control plane scheme is distributed on two-level hierarchical architecture, a first level with a single global SDN controller and a second level with several local SDN controllers. Then, we presented the building blocks of our novel control plane framework, the system Key Performance Indicator (KPI) computation and set the key objective of our design aiming to keep the system KPI value within a predefined threshold window. Last, we proved how this goal is achieved by adapting the number of local SDN controllers and their locations in an elastic manner and deploying them as VNF instances on the cloud thanks to NFV technology.Third, we introduced FMeC concept, leveraging the intertwining of MEC and FMC architectures with the aim of sustaining requirements of the 5G automotive systems. We began by defining FMeC key concept elements permitting to provide FMC technology at the edge of mobile networks. Then, we presented an automated driving use case projection of our FMeC solution integrating automotive with Telco infrastructures towards the future 5G automotive vision. Focusing on the V2I/N communications types, we introduced our FMeC design architecture based on SDN/OpenFlow technologies and MEC infrastructure entities whose resources are pooled together to provide a federated edge clouds. Finally, we presented our mobility-aware framework for edge-cloud service placement based on a set of basic algorithms that permit achieving the automated driving QoS requirements in terms of ultra-short latency within 5G network
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Jayawarna, Vineetha. "Fmoc-peptide gels for cell culture." Thesis, University of Manchester, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.489519.

Повний текст джерела
Анотація:
Spontaneous formation of macroscopic hydrogels from small molecule building blocks via self-assembly is a powerful tool for the preparation of novel materials with well defined properties. Peptides are particularly interesting as building blocks for these materials. Self-assembled nanowires, fibres, sheets and tubes from peptide systems have all been described.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Aufderhorst-Roberts, Anders. "Microrheological characterisation of Fmoc derivative hydrogels." Thesis, University of Cambridge, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.608155.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zhou, Mi. "Self-Assembled bioactive fmoc-peptide hydrogels for skin tissue engineering." Thesis, University of Manchester, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.509392.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Kluth, Stephan. "Quantitative modeling and analysis with FMC-QE." Phd thesis, Universität Potsdam, 2011. http://opus.kobv.de/ubp/volltexte/2011/5298/.

Повний текст джерела
Анотація:
The modeling and evaluation calculus FMC-QE, the Fundamental Modeling Concepts for Quanti-tative Evaluation [1], extends the Fundamental Modeling Concepts (FMC) for performance modeling and prediction. In this new methodology, the hierarchical service requests are in the main focus, because they are the origin of every service provisioning process. Similar to physics, these service requests are a tuple of value and unit, which enables hierarchical service request transformations at the hierarchical borders and therefore the hierarchical modeling. Through reducing the model complexity of the models by decomposing the system in different hierarchical views, the distinction between operational and control states and the calculation of the performance values on the assumption of the steady state, FMC-QE has a scalable applica-bility on complex systems. According to FMC, the system is modeled in a 3-dimensional hierarchical representation space, where system performance parameters are described in three arbitrarily fine-grained hierarchi-cal bipartite diagrams. The hierarchical service request structures are modeled in Entity Relationship Diagrams. The static server structures, divided into logical and real servers, are de-scribed as Block Diagrams. The dynamic behavior and the control structures are specified as Petri Nets, more precisely Colored Time Augmented Petri Nets. From the structures and pa-rameters of the performance model, a hierarchical set of equations is derived. The calculation of the performance values is done on the assumption of stationary processes and is based on fundamental laws of the performance analysis: Little's Law and the Forced Traffic Flow Law. Little's Law is used within the different hierarchical levels (horizontal) and the Forced Traffic Flow Law is the key to the dependencies among the hierarchical levels (vertical). This calculation is suitable for complex models and allows a fast (re-)calculation of different performance scenarios in order to support development and configuration decisions. Within the Research Group Zorn at the Hasso Plattner Institute, the work is embedded in a broader research in the development of FMC-QE. While this work is concentrated on the theoretical background, description and definition of the methodology as well as the extension and validation of the applicability, other topics are in the development of an FMC-QE modeling and evaluation tool and the usage of FMC-QE in the design of an adaptive transport layer in order to fulfill Quality of Service and Service Level Agreements in volatile service based environments. This thesis contains a state-of-the-art, the description of FMC-QE as well as extensions of FMC-QE in representative general models and case studies. In the state-of-the-art part of the thesis in chapter 2, an overview on existing Queueing Theory and Time Augmented Petri Net models and other quantitative modeling and evaluation languages and methodologies is given. Also other hierarchical quantitative modeling frameworks will be considered. The description of FMC-QE in chapter 3 consists of a summary of the foundations of FMC-QE, basic definitions, the graphical notations, the FMC-QE Calculus and the modeling of open queueing networks as an introductory example. The extensions of FMC-QE in chapter 4 consist of the integration of the summation method in order to support the handling of closed networks and the modeling of multiclass and semaphore scenarios. Furthermore, FMC-QE is compared to other performance modeling and evaluation approaches. In the case study part in chapter 5, proof-of-concept examples, like the modeling of a service based search portal, a service based SAP NetWeaver application and the Axis2 Web service framework will be provided. Finally, conclusions are given by a summary of contributions and an outlook on future work in chapter 6. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Procee-dings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp ’07, pages 280 – 287, Las Vegas, NV, USA, June 2007. CSREA Press. ISBN 1-60132-029-9.
FMC-QE (Fundamental Modeling Concepts for Quantitative Evaluation [1]) ist eine auf FMC, den Fundamental Modeling Concepts, basierende Methodik zur Modellierung des Leistungsverhaltens von Systemen mit einem dazugehörenden Kalkül zur Erstellung von Leistungsvorhersagen wie Antwortzeiten und Durchsatz. In dieser neuen Methodik steht die Modellierung der hierarchischen Bedienanforderungen im Mittelpunkt, da sie der Ursprung aller dienstbasierenden Systeme sind. Wie in der Physik sind in FMC-QE die Bedienanforderungen Tupel aus Wert und Einheit, um Auftragstransformationen an Hierarchiegrenzen zu ermöglichen. Da die Komplexität durch eine Dekomposition in mehreren Sichten und in verschiedene hierarchische Schichten, die Unterscheidung von Operations- und Kontrollzuständen, sowie dazugehörige Berechungen unter Annahme der Stationarität reduziert wird, skaliert die Anwendbarkeit von FMC-QE auf komplexe Systeme. Gemäß FMC wird das zu modellierende System in einem 3-dimensionalen hierarchischen Beschreibungsraum dargestellt. Die quantitativen Kenngrößen der Systeme werden in drei beliebig frei-granularen hierarchischen bi-partiten Graphen beschrieben. Die hierarchische Struktur der Bedienanforderungen wird in Entity Relationship Diagrammen beschrieben. Die statischen Bedienerstrukturen, unterteilt in logische und reale Bediener, sind in Aufbaudiagrammen erläutert. Außerdem werden Petri Netze, genauer Farbige Zeit-behaftete Petri Netze, dazu verwendet, die dynamischen Abläufe, sowie die Kontrollflüsse im System zu beschreiben. Anschließend wird eine Menge von hierarchischen Gleichungen von der Struktur und den Parametern des Modells abgeleitet. Diese Gleichungen, die auf dem stationären Zustand des Systems beruhen, basieren auf den beiden Fundamental Gesetzen der Leistungsanalyse, dem Gesetz von Little und dem Verkehrsflussgesetz. Das Gesetz von Little definiert hierbei Beziehungen innerhalb einer hierarchischen Schicht (horizontal) und das Verkehrsflussgesetz wiederum Beziehungen zwischen hierarchischen Schichten (vertikal). Die Berechungen erlauben Leistungsvorhersagen für komplexe Systeme durch eine effiziente Berechnung von Leistungsgrößen für eine große Auswahl von System- und Lastkonfigurationen. Innerhalb der Forschungsgruppe von Prof. Dr.-Ing Werner Zorn am Hasso Plattner Institut an der Universität Potsdam ist die vorliegende Arbeit in einen größeren Forschungskontext im Bereich FMC-QE eingebettet. Während hier ein Fokus auf dem theoretischen Hintergrund, der Beschreibung und der Definition der Methodik als auch der Anwendbarkeit und Erweiterung gelegt wurde, sind andere Arbeiten auf dem Gebiet der Entwicklung einer Anwendung zur Modellierung und Evaluierung von Systemen mit FMC-QE bzw. der Verwendung von FMC-QE zur Entwicklung einer adaptiven Transportschicht zur Einhaltung von Dienstgüten (Quality of Service) und Dienstvereinbarungen (Service Level Agreements) in volatilen dienstbasierten Systemen beheimatet. Diese Arbeit umfasst einen Einblick in den Stand der Technik, die Beschreibung von FMC-QE sowie die Weiterentwicklung von FMC-QE in repräsentativen allgemeinen Modellen und Fallstudien. Das Kapitel 2: Stand der Technik gibt einen Überblick über die Warteschlangentheorie, Zeit-behaftete Petri Netze, weitere Leistungsbeschreibungs- und Leistungsvorhersagungstechniken sowie die Verwendung von Hierarchien in Leistungsbeschreibungstechniken. Die Beschreibung von FMC-QE in Kapitel 3 enthält die Erläuterung der Grundlagen von FMC-QE, die Beschreibung einiger Grundannahmen, der graphischen Notation, dem mathematischen Modell und einem erläuternden Beispiel. In Kapitel 4: Erweiterungen von FMC-QE wird die Behandlung weiterer allgemeiner Modelle, wie die Modellklasse von geschlossenen Netzen, Synchronisierung und Mehrklassen-Modelle beschrieben. Außerdem wird FMC-QE mit dem Stand der Technik verglichen. In Kapitel 5 werden Machbarkeitsstudien beschrieben. Schließlich werden in Kapitel 6 eine Zusammenfassung und ein Ausblick gegeben. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Proceedings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp ’07, 280 – 287, Las Vegas, NV, USA, Juni 2007. CSREA Press. ISBN 1-60132-029-9.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Melki, Cecilia, and Paola Rashid. "Standardisering VS Anpassning och korrelationen till lönsamhet : En flerfallsstudie om hur anpassningsgraden av marknadsstrategier påverkar prestation." Thesis, Södertörns högskola, Institutionen för ekonomi och företagande, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-14591.

Повний текст джерела
Анотація:
Syfte: Studien syftar till att undersöka förhållandet mellan standardisering och anpassning. Detta genom att undersöka prestationen för olika marknadsstrategier beroende på anpassningsgrad samt omvärldsfaktorer. Problemformulering: Hur korrelerar anpassningsgraden för marknadsstrategier till prestation? Metod: Kvantitativ och kvalitativ metod har används i första hand för att angripa vår problemformulering. Valet av ansats är viktigt för att kunna avgöra lämplig analysmetod. Det finns sedan två sätt att mäta hur verkligheten ser ut och det är genom induktion och deduktion. För att få en bra överskådlig bild har fallstudie varit en utmärkt val. Flerfallstudier består av flera fall och avsikten med en sådan studie är att få fram det säregna med huvudfallet genom att jämföra med andra fall. Dessa utgör vår population och därmed måste ett urval göras för att det inte skall bli för stort och det måste rymma inom vår tidsram. Totalt har 1102 produkter undersökt för sju olika varumärkena i tio länderna. Teorier: Lönsamhet och prestation är av stor vikt i uppsatsen eftersom beslutet för om en marknadsföringsstrategi ska standardiseras eller anpassas kommer i slutändan ned till den ekonomiska vinsten för företaget. Det finns tre övergripande synsätt, total standardisering, total anpassning eller att använda en mix av dessa. Vi har använt oss av AdaptStand process modellen, och det beror på att modellen visar hur företag bör gå till väga vid utformning av marknadsstrategier. Modellen är en kombination av standardisering och anpassning och utgör ett hjälpmedel för att finna vilken grad en strategi ska anpassas/standardiseras. Marknadsmixen, de fyra P:na, har haft en ledande roll i uppsatsen. Dock föll ett av P:na bort och det var plats. Anledningen till detta var på grund av att det var svårt att få tag på informationen som behövdes för att det skulle vara relevant för att besvara problemformuleringen. Slutsatser: För att man ska vara lönsam måste man finna en balans som är tillåten mellan marknaden man vill etablera sig i samt företagets kärna. man kan inte tillämpa en marknadsstrategi fullt ut, dvs. med en total anpassning eller total standardisering. Man måste visa för den nya marknaden att man tar hänsyn till deras behov och omständigheter samtidigt ska man inte ge för mycket av vad som kärnan i ens eget företag. Kärnan kan vara namnet, logo, produkterna, förpackningarna osv. Man måste hitta en balans som fungerar för båda parter om man vill vara långvarig och lönsam på den nya marknaden och slå igenom som en världsprodukt.
Objective: This study aims to examine the relationship between standardization and adaptation. This by examining the performance of different marketing strategies depending on the degree of adaptation and environmental factors Problem formulation: How to correlate the degree of adaptation marketing strategies to performance? Methodology: Quantitative and qualitative methods have been used primarily to attack our problem. The choice of approach is important to determine the appropriate method of analysis. There are then two ways to measure the reality and it is through induction and deduction. To get a good overall picture this methodology an excellent choise for our case. More Case Studies consists of a number of cases and the purpose of this study is to seek out the peculiarity of the main case by comparing with other cases. These are our population and therefore a choice hade to be made and that was to make sure that the population become too large and it must fit within our time frame. A total of 1102 products were investigated for seven different brands in ten countries. Theories: Productivity and performance are of great importance in the essay because the decision of whether a marketing strategy to standardize or adapt will ultimately down to the economic benefit for the company. There are three general approaches, total standardization, overall adjustment, or to use a mix of these. We have used the AdaptStand process model, and it is because the model shows how companies should design there marketing strategies. The model is a combination of standardization and adaptation, and as a tool for finding the degree to which a strategy will be adapted / standardized. Marketing mix of the four P's hade a leading role in the essey. However, one of the P´s fell away and there was place. The reason for this was because it was difficult to obtain information needed for it to be relevant to answer the problem formulation. Conclusions: In order to be profitable you have to find a balance that is allowed between the market they want to establish themselves in and the company's identity. You can not use a marketing strategies in full use which a total adaptation or total standardization. You have to show for the new market that the company takes their needs and circumstances in to consideration at the same time the companies should not give too much of what is their identity. The identity may be such as the name, logo, products, packaging and so on. One must find a balance that works for both parties if you want to be a lasting and profitable company in the new market and to make it as a world product.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Fjeld, Hanna. "Kartläggning av FMF och PFAPA hos barn i VästraGötalandsregionen." Thesis, Örebro universitet, Institutionen för medicinska vetenskaper, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-65409.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Mallette, Marielle. "Un programme de formation musicale créative (FMC) au secondaire /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2002. http://theses.uqac.ca.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Vieira, João Paulo Fernandes 1982. "Separação enantiomérica do marcador molecular fmoc-poac em fase estacionária normal e reversa." [s.n.], 2011. http://repositorio.unicamp.br/jspui/handle/REPOSIP/266863.

Повний текст джерела
Анотація:
Orientador: Cesar Costapinto Santana
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Química
Made available in DSpace on 2018-08-19T02:22:30Z (GMT). No. of bitstreams: 1 Vieira_JoaoPauloFernandes_M.pdf: 2071458 bytes, checksum: 4e3166090a9b86f0b92b425b128fb73f (MD5) Previous issue date: 2011
Resumo: A enantiosseparação de alguns compostos é um brilhante e interessante tópico de muitas áreas da química analítica, principalmente na farmacêutica e biomédica. Sabe-se que apesar dos enantiômeros apresentarem fórmulas e massa molecular iguais, quando expostos em um ambiente biológico podem mostrar grandes diferenças nas suas atividades biológicas. O Fmoc-POAC (9-fluorenilmetiloxicarbonil -2,2,5,5-tetrametilpirrolidina-N-oxil-3-amino-4- ácido carboxílico) é um marcador paramagnético quiral com grande potencialidade de uso como derivado marcador de estruturas peptídicas com funções no organismo animal. De acordo com a literatura consultada, não há relatos de escalas semipreparativas na separação enantiomérica desse composto, extremamente necessária para testes de clínicos-analíticos. Este estudo teve como objetivo o desenvolvimento de métodos inovadores na separação enantiomérica do Fmoc-POAC e obtenção dos parâmetros necessários para um aumento de escala. O presente trabalho realizou uma avaliação experimental através de Cromatografia Líquida de Alta Eficiência (CLAE) para enantiosseparação desse composto, com eluição isocrática e nas colunas quirais de fase estacionária normal e reversa: i) analítica da OD-RH Chiralcel® (150x4,6 mm); ii) Analítica Lux Cellulose-2 da Phenomenex® (250x4,6 mm); iii) Semipreparativa OD da Chiralcel® (150x10 mm); iv) Semipreparativa OD-RH da Chiralcel® (250x21 mm). A partir desses ensaios experimentais, foram estimados os parâmetros cromatográficos da enantiosseparação do marcador molecular Fmoc-POAC nas colunas estudadas, além de parâmetros de transferência de massa e termodinâmicos. Os resultados desse trabalho foram que todas as colunas estudadas apresentaram a possibilidade de separação enantiomérica do Fmoc-POAC através desses métodos relativamente simples comparados aos apresentados na literatura, com destaque para a coluna de fase estacionária normal Lux Cellulose-2 (250x4,6 mm), com resolução de até 18,4. De acordo com resultados obtidos, temos a possibilidade de realizar a separação e recuperação desse composto, lançando-se mão de técnicas cromatográficas de maior rendimento, como sistemas contínuos de separação cromatográfica
Abstract: The enantioseparation of some compounds has interesting application in several areas of analytical chemistry, especially in pharmaceutical and biomedical. It is well known that some compounds with same chemical formulas and molecular mass, when exposed to a biological environment, may show different biological activities. The 9- fluorenilmetiloxicarbonil-2,2,5,5-tetrametilpirrolidina-N-oxil-3-amino-4-carboxylic acid (Fmoc-POAC) is a chiral paramagnetic marker with great potential as a marker for peptide structures with functions in the animal organism. According to the literature, there are no reports of enantiomeric separation of this compound unless in laboratory scale and large scale would be necessary for clinical and analytical testing. This study aimed at the development of innovative methods for the enantiomeric separation of Fmoc-POAC as well as obtaining the necessary parameters for scale up of their purification. The present work carried out an experimental evaluation using High Performance Liquid Chromatography (HPLC) for this compound enantioseparation with isocratic elution and columns with normal and reverse chiral stationary phase: i) Analytical Chiralcel® OD-RH (150x4, 6 mm ), ii) Analytical Lux Cellulose-2 from Phenomenex® (250x4, 6 mm), iii) Semi-preparative Chiralcel OD® (150x10 mm), iv) Semi-preparative Chiralcel OD-RH® (250x21 mm). From these assays, chromatographic parameters were estimated for the enantioseparation of Fmoc-POAC molecular marker beside parameters related to the thermodynamics and mass transfer. The conclusions in this research were that all columns present the possibility of enantiomeric separation of Fmoc-POAC by methods relatively simple compared to those presented in the literature, specially the column with normal stationary phase Lux Cellulose-2 (250x4, 6 mm) with resolution of up to 18.4. The results indicate the possibility of enantioseparation and recovery of these compounds by high yield continuous chromatography techniques
Mestrado
Desenvolvimento de Processos Biotecnologicos
Mestre em Engenharia Química
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "FMFC"

1

Greff, Michel, ed. Post’U FMC-HGE. Paris: Springer Paris, 2009. http://dx.doi.org/10.1007/978-2-287-99247-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Greff, Michel, Marc Barthet, Laurent Beaugerie, Yoram Bouhnik, Jean-Pierre Bronowicki, Bruno Buecher, Jacques Corallo, et al., eds. Post’U FMC-HGE. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lévy, Philippe, ed. Post’U FMC-HGE. Paris: Springer Paris, 2011. http://dx.doi.org/10.1007/978-2-8178-0237-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Greff, Michel. Post’U FMC-HGE. Paris: Springer Paris, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Corps, United States Marine, ed. MAGTF Intelligence Operations, FMFM 3-21. [S.l: s.n., 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Neubauer, Eric A. FMC boxcars since 1972. [Monrovia? Calif.]: Modern Transport Technical & Historical Society, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Cubanas, Federación de Mujeres. What is the FMC? Cuba: s.n., 1987.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Chadwick, Richard John. Fmoc-solid phase synthesis of N-Glycopeptides. Manchester: University of Manchester, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Cubanas, Federación de Mujeres, ed. FMC IV congreso: Informe central. [La Habana: FMC, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

United States. Federal Maritime Commission., ed. Potential offerors FMC ATFI System. Washington, D.C: Federal Maritime Commission, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "FMFC"

1

Desnick, Robert J., Orlando Guntinas-Lichius, George W. Padberg, Gustav Schonfeld, Xiaobo Lin, Maurizio Averna, Pin Yue, et al. "FMF." In Encyclopedia of Molecular Mechanisms of Disease, 666. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-29676-8_8517.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zrimsek, Andrej, and Tine Smukavec. "Fair metacomputer — FMC." In Parallel Scientific Computing, 557–66. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/bfb0030182.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Puchner, Rudolf. "Familiäres Mittelmeerfieber (FMF)." In Rheumatologie aus der Praxis, 133–34. Vienna: Springer Vienna, 2010. http://dx.doi.org/10.1007/978-3-211-99713-0_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Puchner, Rudolf. "Familiäres Mittelmeerfieber (FMF)." In Rheumatologie aus der Praxis, 137–38. Vienna: Springer Vienna, 2012. http://dx.doi.org/10.1007/978-3-7091-1044-7_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Godeberge, P. "La rectite réfractaire." In Post’U FMC-HGE, 1–7. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ruszniewski, P. "Prise en charge des tumeurs carcinoïdes du tube digestif." In Post’U FMC-HGE, 83–88. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ducrotté, P. "Syndrome de l’intestin irritable post-infectieux." In Post’U FMC-HGE, 89–94. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zins, M., I. Boulay-Coletta, B. Mercier-Pageyral, M. C. Jullès, V. Molinié, O. Marty, and J. Loriau. "Lésions pariétales de la vésicule." In Post’U FMC-HGE, 95–104. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4_12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lévy, P. "Les tumeurs intracanalaires papillaires et mucineuses du pancréas." In Post’U FMC-HGE, 105–11. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4_13.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Bonnaud, G., and B. Dupin-Nizard. "Évaluation des pratiques professionnelles et coloscopie." In Post’U FMC-HGE, 113–14. Paris: Springer Paris, 2010. http://dx.doi.org/10.1007/978-2-8178-0097-4_14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "FMFC"

1

"FMEC 2019 Committees." In 2019 Fourth International Conference on Fog and Mobile Edge Computing (FMEC). IEEE, 2019. http://dx.doi.org/10.1109/fmec.2019.8795344.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

"FMEC 2019 Keynote 1." In 2019 Fourth International Conference on Fog and Mobile Edge Computing (FMEC). IEEE, 2019. http://dx.doi.org/10.1109/fmec.2019.8795306.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

"FMEC 2019 Keynote 2." In 2019 Fourth International Conference on Fog and Mobile Edge Computing (FMEC). IEEE, 2019. http://dx.doi.org/10.1109/fmec.2019.8795350.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

"FMEC 2019 Keynote 4." In 2019 Fourth International Conference on Fog and Mobile Edge Computing (FMEC). IEEE, 2019. http://dx.doi.org/10.1109/fmec.2019.8795352.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

"FMEC 2019 Keynote 3." In 2019 Fourth International Conference on Fog and Mobile Edge Computing (FMEC). IEEE, 2019. http://dx.doi.org/10.1109/fmec.2019.8795364.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ramos, Luiz Eduardo da Silva, and Carlos Augusto Paiva da Silva Martins. "Funções MPI de Comunicação Coletiva Reconfiguráveis." In Workshop em Sistemas Computacionais de Alto Desempenho. Sociedade Brasileira de Computação, 2004. http://dx.doi.org/10.5753/wscad.2004.19016.

Повний текст джерела
Анотація:
As funções MPI (Message Passing Interface) de comunicação coletiva (FMCC) são comumente implementadas em bibliotecas que utilizam algoritmos invariáveis. Nem sempre elas apresentam o melhor desempenho em todos os tipos de aplicações e ambientes de execução. Neste artigo, apresentamos, simulamos, modelamos analiticamente, verificamos e analisamos FMCC que apresentam estruturas e comportamentos que podem ser alterados para fornecer configurações, flexibilidade e desempenho otimizados. Nossos principais objetivos são: propor e apresentar um conjunto de FMCC (reconfiguráveis) otimizadas; apresentar, simular, modelar analiticamente, verificar e analisar as funções propostas. Nossas metas são: simular diferentes versões de FMCC, incluindo uma versão reconfigurável, e fornecer uma análise comparativa entre implementações fixas e reconfiguráveis. Os resultados mostram que a reconfiguração no nível de algoritmo realmente produz ganhos de flexibilidade e de desempenho em FMCCs.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Suhr, L. F., I. T. Monroy, and J. J. Vegas Olmos. "FMWC radar for breath detection." In 2016 Progress in Electromagnetic Research Symposium (PIERS). IEEE, 2016. http://dx.doi.org/10.1109/piers.2016.7735336.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

B. S. Moreira, Thalita, Marcus V. S. Costa, and F. G. Nogueira. "Offline FMPC Applied to the 3SSC Boost Converter." In Congresso Brasileiro de Automática - 2020. sbabra, 2020. http://dx.doi.org/10.48011/asba.v2i1.1664.

Повний текст джерела
Анотація:
This article develops a novel application for fuzzy model predictive control (FMPC), applying this control law to a three state-switching cell (3SSC) boost converter. The converter is modeled using augmented state space equations through a polytopic approach, associated with fuzzy membership functions in order to reject disturbances caused by the change in the operating point. Furthermore, the FMPC combines Model Predictive Control (MPC), Takagi-Sugeno (T-S) and Parallel-Distributed Compensation (PDC) fuzzy methodologies. In addition, an offline approach for the FMPC is presented, whose gains are obtained via stability ellipsoids and stored in a lookup-table. The obtained results highlight the performance of the proposed method in comparison with the benchmark controller, through analysis of time responses, stability ellipsoids and performance index J∞.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Song, Lixing, and Aaron Striegel. "FMNC - rapid and accurate wifi characterization." In MobiCom'16: The 22nd Annual International Conference on Mobile Computing and Networking. New York, NY, USA: ACM, 2016. http://dx.doi.org/10.1145/2973750.2985619.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Spencer, Roger, Ruth Sunderman, and Evgueni Todorov. "FMC/TFM experimental comparisons." In 44TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLUME 37. Author(s), 2018. http://dx.doi.org/10.1063/1.5031512.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "FMFC"

1

Weaver, Charles. HSADC FMC. Office of Scientific and Technical Information (OSTI), April 2021. http://dx.doi.org/10.2172/1776733.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

DeLuga, Ronald E. Design of a Family of Munitions Containers (FMC) Overall Project Management of FMC number 1, FMC number 2 and FMC number 3. Fort Belvoir, VA: Defense Technical Information Center, January 1995. http://dx.doi.org/10.21236/ada290134.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Bagnall, C., and W. Wise. Metallurgical evaluation of FMPC Vessel No. 2. Office of Scientific and Technical Information (OSTI), March 1989. http://dx.doi.org/10.2172/6239524.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Langton, C. A., and J. R. Cook. Response to requests by FMF and DWPF concerning disposal of FMF saltstone drums in Z-Area vaults. Office of Scientific and Technical Information (OSTI), July 1989. http://dx.doi.org/10.2172/6689331.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Langton, C. A., and J. R. Cook. Response to requests by FMF and DWPF concerning disposal of FMF saltstone drums in Z-Area vaults. Office of Scientific and Technical Information (OSTI), July 1989. http://dx.doi.org/10.2172/10116348.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Eckart, R., D. Carr, B. Conner, R. Janke, and R. Janke. Radiological environmental pathway screening analysis for the Feed Materials Production Center (FMPC). Office of Scientific and Technical Information (OSTI), November 1989. http://dx.doi.org/10.2172/330568.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Cohen, R. S. CSC Curriculum That Meets the Needs of the FMF. Fort Belvoir, VA: Defense Technical Information Center, January 1991. http://dx.doi.org/10.21236/ada493297.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Christodoulou, Christos. FGPA Mission Assurance Center (FMAC) Support Activity at the University of New Mexico. Fort Belvoir, VA: Defense Technical Information Center, October 2013. http://dx.doi.org/10.21236/ada603629.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Tucker, Craig A. False Prophets: The Myth of Maneuver Warfare and the Inadequacies of FMFM-1 Warfighting. Fort Belvoir, VA: Defense Technical Information Center, May 1995. http://dx.doi.org/10.21236/ada301034.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Martino, L. E., J. J. Jerden, T. A. Kimmell, and J. Quinn. Independent Review of Elemental Phosphorus Remediation at the Eastern Michaud Flats FMC Operable Unit near Pocatello, Idaho. Office of Scientific and Technical Information (OSTI), January 2016. http://dx.doi.org/10.2172/1238045.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії