Готові списки джерел за темами / Fabrication

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Fabrication"

Автор: Grafiati

Опубліковано: 4 червня 2021

Оновлено: 23 листопада 2024

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fabrication".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Fabrication"

R., R., and W. Ritha. "A Fabrication Repertoire Replica Amidst Partisan Commerce Layaway Strategem And Infalllibity Cannibalizing Neutrosophic Fuzzy Number." International Journal of Neutrosophic Science 24, no. 1 (2024): 196–207. http://dx.doi.org/10.54216/ijns.240118.

Повний текст джерела

Анотація:

Infallibility is an important factor both in fabrication repertoire replica and in the great demand of products. During a fabrication process, more exemplary products with high reliableness aim for increase in product demand although credit rating too is a prominent business strategy. Integrating the above duo concepts, we explain and explore mathematically a fabricating repertoire replica with partisan layaway stratagem and infallibility effect on the fabrication system wherein the demand of the customers is reliant on the product cost and rate of decay is regarded as constant. In this propounded model, commerce layaway stratagem on the fabricator and the customer is acquainted by considering all the achievable sitch due to permitted credit (layaway) duration. As a consequence, considering all the achievable instances for the fabricator and the customer’s layaway duration, seven non-linear optimization issues for the proposed replica are required.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hao, Yongcun, Yanlong Wang, Yonghao Liu, Weizheng Yuan, and Honglong Chang. "An SOI-based post-fabrication process for compliant MEMS devices." Journal of Micromechanics and Microengineering 34, no. 4 (March 12, 2024): 045005. http://dx.doi.org/10.1088/1361-6439/ad2f4b.

Повний текст джерела

Анотація:

Abstract Fabricating compliant microelectromechanical system (MEMS) devices is challenging because they are easily damaged during fabrication. This paper presents a fabrication process based on the silicon-on-insulator (SOI) wafer for compliant MEMS devices. In the fabrication process, tethers were used to enhance the strength of the compliant devices during fabrication and finally melted with an electric current to release the device after fabrication. We discover that the power supply mode and voltage value are very critical for low-resistance tether melting. The fabrication results show that the yield rate of the compliant microgripper increased from 44% to 100%, which is a significant improvement compared with conventional processes. The successful fabrication of the microgripper proved that the proposed SOI-based post-fabrication process is feasible and can be used to fabricate different kinds of compliant devices.

Стилі APA, Harvard, Vancouver, ISO та ін.

Coogan, Jeremiah, Candida R. Moss, and Joseph A. Howley. "The Socioeconomics of Fabrication: Textuality, Authenticity, and Social Status in the Roman Mediterranean." Arethusa 57, no. 2 (March 2024): 227–53. http://dx.doi.org/10.1353/are.2024.a934134.

Повний текст джерела

Анотація:

Abstract: This article analyses the figure of the "fabricator" within the complex ancient discourses that produce and limit authorial status. We map Roman discourses of textual fabrication in three distinct yet intersecting deployments: the fabrication of documents, the fabrication of texts, and the fabrication of meaning. A wide range of sources from the high Roman empire illuminate how elites used this discourse of fabrication to characterize forms of textual production, invention, and interpretation as illicit. The discourse of fabrication, with its contrasts between elite and banausic skills and spaces, served to manufacture and maintain differences between elite intellectuals and the low-status workers who supported them. Accusations of fabrication were a discursive practice used to dismiss individuals, deride arguments, and (re)produce cultural and social boundaries in the Roman Mediterranean.

Стилі APA, Harvard, Vancouver, ISO та ін.

Sowrirajan, M., S. Vijayan, M. Arulraj, and J. Sundaresan. "Metallurgical assessments on 316L stainless steel thin walled plate fabricated through GMAW based typical Wire Arc Additive Manufacturing." YMER Digital 21, no. 02 (February 9, 2022): 227–37. http://dx.doi.org/10.37896/ymer21.02/23.

Повний текст джерела

Анотація:

Wire Arc Additive Manufacturing (WAAM) is developing trendy process for the fabrication of metal components nowadays. In the present study, the concept of WAAM is employed but typical concept is used for fabricating a thin walled plate sample using AISI 316L grade of stainless steel. The plate size is limited for ease up to laying only three weld beads in traverse direction rather than vertically as in the case of additive manufacturing. The chemical composition of fabricated sample is analysed for checking the use of WAAM for metal component fabrication. The ferrite number is also found and reported for supporting the fabricated component to withstand the corrosion. The low carbon steel was used as a parent metal to deposit the fabricating stainless steel thin plate. Microstructure of interface between base metal and fabricating metal is also revealed for confirming defect free component fabrication. These results are found to be satisfactory enough and thus the WAAM shall be used for the fabrication of desired components also especially in stainless steels.

Стилі APA, Harvard, Vancouver, ISO та ін.

Bakar, Azrena Abu, Masahiro Nakajima, Chengzhi Hu, Hirotaka Tajima, Shoichi Maruyama, and Toshio Fukuda. "Fabrication of 3D Photoresist Structure for Artificial Capillary Blood Vessel." Journal of Robotics and Mechatronics 25, no. 4 (August 20, 2013): 673–81. http://dx.doi.org/10.20965/jrm.2013.p0673.

Повний текст джерела

Анотація:

We propose a new method for fabricating artificial capillaries using direct laser writing. IP-L and Ormocomp are tested as photoresist materials. Three different microstructures were fabricated from IP-L: a porous hollow pipe microstructure, a 3 × 3 array of twig microstructures, and an array of hollow twig microstructures. Porous hollow pipe microstructures of different diameters were fabricated from Ormocomp, a biocompatible photoresist. These designs resemble capillaries. IP-L and Ormocomp fabrication parameters, such as laser power, numerical aperture, fabrication time, and fabrication model, are compared. Fabrication time is related to the fabrication model chosen during the direct laser writing process. Combined model fabrication is recommended over solid model fabrication because it results in shorter fabrication time and a more robust microstructure that is more likely to maintain its shape on the substrate after development. Laser power is another important parameter controlling fabrication. IP-L fabrication withstands up to 20 mW of laser power, unlike Ormocomp microstructures, which require laser power of less than 18 mW. IP-L and Ormocomp photoresist stiffness is also evaluated. The fabrication of artificial capillaries is important in developing vascular simulators that enable researchers to understand, for example, blood pressure in the kidney glomerulus.

Стилі APA, Harvard, Vancouver, ISO та ін.

Deisinger, Ulrike, Sabine Hamisch, Matthias Schumacher, Franzika Uhl, Rainer Detsch, and Günter Ziegler. "Fabrication of Tailored Hydroxyapatite Scaffolds: Comparison between a Direct and an Indirect Rapid Prototyping Technique." Key Engineering Materials 361-363 (November 2007): 915–18. http://dx.doi.org/10.4028/www.scientific.net/kem.361-363.915.

Повний текст джерела

Анотація:

In the last few years new fabrication methods, called rapid prototyping (RP) techniques, have been developed for the fabrication of hydroxyapatite scaffolds for bone substitutes or tissue engineering applications. With this generative fabrication technology an individual tailoring of the scaffold characteristics can be realised. In this work two RP techniques, a direct (dispense-plotting) and an indirect one (negative mould technique), are described by means of fabricating hydroxyapatite (HA) scaffolds for bone substitutes or bone tissue engineering. The produced scaffolds were characterised, mainly regarding their pore and strut characteristics. By these data the performance of the two fabrication techniques was compared. Dispense-plotting turned out to be the faster technique while the negative mould method was better suited for the fabrication of exact pore and strut geometries.

Стилі APA, Harvard, Vancouver, ISO та ін.

Wahyuni, Wulan Tri, Budi Riza Putra, Achmad Fauzi, Desi Ramadhanti, Eti Rohaeti, and Rudi Heryanto. "A Brief Review on Fabrication of Screen-Printed Carbon Electrode: Materials and Techniques." Indo. J Chem. Res. 8, no. 3 (January 31, 2021): 210–18. http://dx.doi.org/10.30598//ijcr.2021.7-wul.

Повний текст джерела

Анотація:

Screen-printed carbon electrode (SPCE) is one of the most interesting designs to combine a working (from carbon based material), reference, and counter electrode in a single-printed substrate. SPCE has been used in many electrochemical measurements due to its advantages for analysis in microscale. This paper summarises the main information about SPCE fabrication from the material and fabrication technique aspect on the flat substrate based on the work that has been published in the last 30 years. The success of SPCE fabrication is highly dependent on the composition of conductive ink which consists of conductive materials, binder, and solvents; substrate; and fabrication techniques. Among the carbon-based materials, the most widely used for SPCE fabrications are graphite, graphene, and carbon nanotubes. The frequent binder used are polymer-based materials such as polystyrene, polyaniline, poly 3,4-ethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS), and polyvinyl chloride. The solvents used for SPCE fabrication are varied including water and various organic solvents. The main characteristics of the SPCE substrate should be inert in order to avoid any interferences during electrochemical measurements. The screen printing and inkjet printing technique are preferred for SPCE fabrication due to easy fabrication and the possibility for mass production of SPCE.

Стилі APA, Harvard, Vancouver, ISO та ін.

Wahyuni, Wulan Tri, Budi Riza Putra, Achmad Fauzi, Desi Ramadhanti, Eti Rohaeti, and Rudi Heryanto. "A Brief Review on Fabrication of Screen-Printed Carbon Electrode: Materials and Techniques." Indonesian Journal of Chemical Research 8, no. 3 (January 31, 2021): 210–18. http://dx.doi.org/10.30598/ijcr.2021.8-wul.

Повний текст джерела

Анотація:

Стилі APA, Harvard, Vancouver, ISO та ін.

Sun, Yuting, Jiayu Ding, Xiaoyu Xia, Xiaohan Wang, Jianwen Xu, Shuqing Song, Dong Lan, Jie Zhao, and Yang Yu. "Fabrication of airbridges with gradient exposure." Applied Physics Letters 121, no. 7 (August 15, 2022): 074001. http://dx.doi.org/10.1063/5.0102555.

Повний текст джерела

Анотація:

In superconducting quantum circuits, airbridges are critical for eliminating parasitic slotline modes of coplanar waveguide circuits and reducing crosstalks between direct current magnetic flux biases. Here, we present a technique for fabricating superconducting airbridges. With this technique, a single layer of photoresist is employed, and the gradient exposure process is used to define the profile of airbridges. In order to properly obtain the bridge profile, we design exposure dosage based on residual photoresist thickness and laser power calibrations. Compared with other airbridge fabrication techniques, the gradient exposure fabrication technique provides the ability to produce lossless superconducting airbridges with flexible size and, thus, is more suitable for large-scale superconducting quantum circuits. Furthermore, this method reduces the complexity of the fabrication process and provides a high fabrication yield.

Стилі APA, Harvard, Vancouver, ISO та ін.

Xie, Ke Fei, Ke Fu Yao, and Tian You Huang. "Influence of the Melting Temperature on the Fabrication of a Ti-Cu-Zr-Ni-Sn Bulk Metallic Glass." Materials Science Forum 688 (June 2011): 413–18. http://dx.doi.org/10.4028/www.scientific.net/msf.688.413.

Повний текст джерела

Анотація:

The successful fabrication of bulk glassy alloys depends on the chemical composition and fabricating process. To prepare bulk metallic glasses (BMGs) by casting with copper mould, the cooling ability of the mould and the melting temperature are considered. In this work the influence of the melting temperature on the fabrication of the BMGs is studied by varying the suction casting temperature of the Ti44.10Cu.37.04Zr9.80Ni7.06Sn2.00alloy by varying the current density employed in melting process. The results show that there is an optimum melting temperature range for fabricating the Ti-Cu-Zr-Ni-Sn BMG by suction casting. When the temperature is outside this range, the crystalline phases occur within the glassy matrix. The influence of the melting temperature on the fabrication of the Ti-Cu-Zr-Ni-Sn BMG is discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Fabrication"

Rader, Nicolas Glen. "DESIGN [fabrication] BUILD." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/34425.

Повний текст джерела

Анотація:

Thesis (M. Arch.)--Massachusetts Institute of Technology, Dept. of Architecture, 2006.
Includes bibliographical references (p. 73-75).
DESIGN [fabrication] BUILD proposes a new relationship among the architect, homeowner, and fabricator/assembler through the use of parametric software in order to create a truly customizable prefabricated home. This customization is possible through the combination of the software with CNC machinery and a material yet to be fully explored by architects, honeycomb composite panel. The result is a kit of parts that is efficient in terms of time and cost in design, production, and assembly, it is offered as an improvement from contracted stick built construction.
by Nicolas Glen Rader.
M.Arch.

Стилі APA, Harvard, Vancouver, ISO та ін.

Garvey, Carrie Rosicky. "Foliage and Fabrication." VCU Scholars Compass, 2006. http://scholarscompass.vcu.edu/etd/664.

Повний текст джерела

Анотація:

In my photographic work, I contrast natural and man-made objects abstracted by manipulation of scale. Details of the objects are blown up to proportions larger than life. By distorting the scale, I aim to allow the audience to view the image out of context, enabling the viewer to see it for its aesthetic value rather than the object's functional purpose.

Стилі APA, Harvard, Vancouver, ISO та ін.

Høvik, Jens. "Photonic Crystal Waveguide Fabrication." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elektronikk og telekommunikasjon, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19277.

Повний текст джерела

Анотація:

This research is entirely devoted to the study and fabrication of structures with periodic dielectric constants, also known as photonic crystals (PhCs). These structures show interesting dispersion characteristics which give them a range of prohibited frequencies that are not allowed to propagate within the crystal. This property makes them suited for a wide array of photonic-based components. One-dimensional photonic crystals are already commercialized and are of widespread use in for example thin-film optics, and two-dimensional PhCs are available in the form of photonic crystal fibers.Much work is being done on the analysis of photonic crystals and their application in various photonic components. In designing any photonic crystal component the properties of the crystal must first be understood and analyzed. By using frequency-domain simulation software we have studied the properties of bulk photonic crystals and designed the ideal structure for confining light of any design wavelength within a three-dimensional photonic crystal slab.Through simulations, the ideal periodicity of the PhC has been found along with its optimal geometry for waveguiding purposes. The study was then extended to three dimensions and the optimal thickness of the PhC slab was found. By using these determined values we were able to properly confine light inside a defect in a photonic crystal structure. This phenomenon allowed us to briefly examine the use of a photonic crystal as a waveguide. This research was then continued by attempting to fabricate such a device. Methods entailing how to create a silicon-on-insulator wafer through plasma enhanced chemical vapor deposition were developed. Profilometry, refractometry and ellipsometry were used to characterize the quality of the SOI wafer. A surface roughness between 1.5-3.5 nm was found. The losses of the amorphous silicon was attempted to be measured through ellipsometry, but the ellipsometer was found incapable for loss meassurements. Better testing methods must therefore be developed.The PhC waveguiding structure is formed thorugh electron-beam lithography, and various thicknesses of photoresist are tested and characterized. Furthermore, various materials were attempted as an etch mask. Polymethyl methacrylate, $SiO_2$, and chromium were all utilized, where only the latter showed good enough selectivity for silicon etching. This lead to using both chromium and $SiO_2$ as the mask of choice. Several etching methods were tested. Both standard wet etching, room-temperature reactive ion etching recipes as well as cryogenic inductively coupled plasma reactive ion etching recipes were employed. Dry etching was found to be of insufficient quality, while the complete isotropy of wet etching rendered it impractical for fine structures needed for a PhC waveguide.The final solution which allowed the formation of the photonic crystal was a stacked structure, using both chromium, oxide, and PMMA throughout the etching process in order to achieve the wanted results. The PMMA was used as an etch mask to imprint the pattern in the oxide layer. The oxide layer was in turn used as an etch mask to imprint the pattern into the chromium, and the chromium served as the final mask to be used during cryogenic silicon etching. The cryogenic silicon etching recipe was characterized and shown to be sufficiently anisotropic as well as having a rather high maximum etch depth. The recipe show an unwanted formation of so-called silicon grass, and a high sidewall roughness is observed. Finally, a complete PhC waveguiding structure with both a grating, a taper, and a silicon waveguide is fabricated. Although they require more work to be optimized, the methods presented in this thesis provide the basis for fabricating a multitude of optical components, not only PhC's.

Стилі APA, Harvard, Vancouver, ISO та ін.

More, Daesha. "Microhotplate Sensor Array Fabrication." Fogler Library, University of Maine, 2007. http://www.library.umaine.edu/theses/pdf/MoreD2007.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Han, Sarah (Sarah J. ). "Biologically inspired digital fabrication." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/85422.

Повний текст джерела

Анотація:

Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2013.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 37-40).
Objects and systems in nature are models for the practice of sustainable design and fabrication. From trees to bones, natural systems are characterized by the constant interplay of creation, environmental response, and analysis of current structural constituents, as part of a larger dynamic system. In contrast, traditional methods of digital design and fabrication are characterized by a linear progression of three main stages: modeling (digital generation in the digital domain), analysis (digital mapping of the physical domain), and fabrication (physical generation of the digital domain). Moving towards a system process where modeling, analysis, and fabrication are integrated together for the development of a dynamic process will transform traditional fabrication technology and bring about the creation of sustainable and more efficient synthetic environments. Integration of modeling, analysis, and fabrication into one fluid process requires the development of a fabrication platform with capabilities for real time control. This thesis explores and investigates the creation of a framework for real time control of industrial robotic arms as part of a multipurpose fabrication platform.
by Sarah Han.
M. Eng.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hsu, Charles Heng-Yuan 1967. "Silicon microaccelerometer fabrication technologies." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43545.

Повний текст джерела

Анотація:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1997.
Includes bibliographical references (leaves 275-282).
by Charles Heng-Yuan Hsu.
Ph.D.

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Guixin. "Superlens design and fabrication." HKBU Institutional Repository, 2009. http://repository.hkbu.edu.hk/etd_ra/1066.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Xia, Sijing. "Fabrication of protein nanostructures." Thesis, University of Sheffield, 2015. http://etheses.whiterose.ac.uk/10126/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

RUBERTO, FRANCESCO. "Fablabs to transform the Italian Industry: The Case of the Fablabs Community." Doctoral thesis, Università degli studi di Pavia, 2017. http://hdl.handle.net/11571/1220438.

Повний текст джерела

Анотація:

This research studies the case of Fablabs community helping the Italian industry in the process of innovation and growth. This case is representative of how entrepreneurs engage in Fablab digital fabrication technologies which allow to make almost anything and optimizing time and production cost. The number of entrepreneurs in Italy using Fablab services is exploding. However, while entrepreneurs in the main centers of innovation, such as Silicon Valley, have crucial social, cultural, economic, and material resources to build high-impact companies, these resources are often not present in moderate innovators countries. Those resources are defined as innovation infrastructures, stable and dependable resources necessary to systematically conduct technology innovation activities. Entrepreneurs in moderate innovators countries have a double challenge of excelling at their company, and using innovation infrastructures such as Fablabs. This research analyzes how Fablabs can facilitate the innovation activities of the Italian industries, reviewing the case of Fablabs who experience success in providing services to companies. To obtain useful data that match the research objectives, this study use a Focus group interview method. The questions are open-ended, which means that during the interviews, the actual questions may change according to the responses of the interviewees. I depended on triangulation as a means of ensuring construct validity. Data triangulation involves collecting data from interviews, observations, and document analysis. The findings will contribute to understanding the role that Fablabs play for the Italian industry, explaining how digital fabrication technologies can help Italian companies to be more competitive. Keywords: Fablab, Italian industry, MIT, Digital Fabrication, Neil Gershenfeld, case study, Silicon Valley.
This research studies the case of Fablabs community helping the Italian industry in the process of innovation and growth. This case is representative of how entrepreneurs engage in Fablab digital fabrication technologies which allow to make almost anything and optimizing time and production cost. The number of entrepreneurs in Italy using Fablab services is exploding. However, while entrepreneurs in the main centers of innovation, such as Silicon Valley, have crucial social, cultural, economic, and material resources to build high-impact companies, these resources are often not present in moderate innovators countries. Those resources are defined as innovation infrastructures, stable and dependable resources necessary to systematically conduct technology innovation activities. Entrepreneurs in moderate innovators countries have a double challenge of excelling at their company, and using innovation infrastructures such as Fablabs. This research analyzes how Fablabs can facilitate the innovation activities of the Italian industries, reviewing the case of Fablabs who experience success in providing services to companies. To obtain useful data that match the research objectives, this study use a Focus group interview method. The questions are open-ended, which means that during the interviews, the actual questions may change according to the responses of the interviewees. I depended on triangulation as a means of ensuring construct validity. Data triangulation involves collecting data from interviews, observations, and document analysis. The findings will contribute to understanding the role that Fablabs play for the Italian industry, explaining how digital fabrication technologies can help Italian companies to be more competitive. Keywords: Fablab, Italian industry, MIT, Digital Fabrication, Neil Gershenfeld, case study, Silicon Valley.

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Xiang. "Making Fabrication Real: Fabrication for Real Usage, with Real Objects, by Real People." Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/1139.

Повний текст джерела

Анотація:

The increasingly personal and ubiquitous capabilities of computing—everything from smartphones to virtual reality—are enabling us to build a brave new world in the digital realm. Despite these advances in the virtual world, our ability as end-users to transform the physical world still remains limited. The emergence of low-cost fabrication technology (most notably 3D printing) has brought us a dawn of making, promising to empower everyday users with the ability to fabricate physical objects of their own design. However, the technology itself is oblivious of the physical world—things are, in most cases, assumed to be printed from scratch in isolation from the real world objects they will be attached to and work with. To bridge this ‘gulf of fabrication’, my thesis research focuses on developing fabrication techniques with design tool integration to enable users to expressively create designs that can be attached to and function with existing real-world objects. Specifically, my work explores techniques that leverage the 3D printing process to create attachments directly over, onto and around existing objects; a design tool further enables people to specify and generate adaptations that can be attached to and mechanically transform existing objects in user-customized ways; a user-driven approach allows people to express and iterate structures that are optimized to support existing objects; finally, a library of ‘embeddables’ demonstrate that existing objects can also augment 3D printed designs by embedding a large variety of material to realize different properties and functionalities. Overall my thesis aspires to make fabrication real—enabling people to express, iterate and fabricate their designs that closely work with real-world objects to augment one another.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Fabrication"

Petersen, Paulann. Fabrication. Portland, Or: 26 Books, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

C, Oakley, Green V, Sutcliffe C, and City and Guilds of London Institute., eds. Fabrication. Cheltenham: Stam press, 1987.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Petersen, Paulann. Fabrication. Portland, Or: 26 Books, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Williams, Kim, ed. Digital Fabrication. Basel: Springer Basel, 2012. http://dx.doi.org/10.1007/978-3-0348-0582-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yatsui, Takashi. Nanophotonic Fabrication. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24172-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

B, Bentz, Longeot H, and Jourdan L, eds. Fabrication industrielle. Paris: Dunod, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shimizu, Gordon T. Electronic fabrication. Albany, N.Y: Delmar Publishers, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pasolini, Pier Paolo. Fabrication =: Affabulazione. London: Oberon Books, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Institute, Welding, ed. Fabrication: A review of welding and fabrication worldwide. Abington: Welding Institute, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Institute, Welding, ed. Fabrication: A review of welding and fabrication worldwide. Abington: Welding Institute, 1987.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Fabrication"

Pelleg, Joshua. "Fabrication." In Mechanical Properties of Silicon Based Compounds: Silicides, 13–16. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22598-8_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

German, Randall M. "Fabrication." In Particulate Composites, 225–80. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29917-4_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chamberlain, M. R. "Fabrication." In Dictionary of Converting, 110–69. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2266-5_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Veendrick, Harry. "Fabrication." In Bits on Chips, 167–87. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76096-4_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Frigeni, Fabrizio. "Fabrication." In Industrial Robotics Control, 537–51. Berkeley, CA: Apress, 2022. http://dx.doi.org/10.1007/978-1-4842-8989-1_19.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cubitt, Sean. "Fabrication." In Emerging Digital Spaces in Contemporary Society, 207–18. London: Palgrave Macmillan UK, 2010. http://dx.doi.org/10.1057/9780230299047_34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bredella, Nathalie. "Fabrication." In The Architectural Imagination at the Digital Turn, 120–44. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003189527-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Otto, Ulf. "Fabrication." In The Theater of Electricity, 117–53. Stuttgart: J.B. Metzler, 2023. http://dx.doi.org/10.1007/978-3-476-05961-1_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Harmon, Brendan. "Fabrication." In Computational Design for Landscape Architects, 183–99. New York: Routledge, 2024. http://dx.doi.org/10.4324/9781003354376-18.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Williams, Kim. "Digital Fabrication." In Digital Fabrication, 407–8. Basel: Springer Basel, 2012. http://dx.doi.org/10.1007/978-3-0348-0582-7_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Fabrication"

Reiser, Susan L., and Rebecca F. Bruce. "Fabrication." In the 40th ACM technical symposium. New York, New York, USA: ACM Press, 2009. http://dx.doi.org/10.1145/1508865.1509001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Camilo, Gilberto M. "Mechanical properties of chalcogenide glasses: a review." In Photonics Fabrication Europe, edited by Hans G. Limberger and M. John Matthewson. SPIE, 2003. http://dx.doi.org/10.1117/12.488150.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cremona, Marco, Stefano Pelli, Joao A. M. Pereira, and Giancarlo C. Righini. "Fabrication and characterization of optical waveguides on LiF by ion beam irradiation." In Photonics Fabrication Europe, edited by Giancarlo C. Righini. SPIE, 2003. http://dx.doi.org/10.1117/12.472700.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Diemeer, Mart B. J. "Hybrid optical waveguide devices based on polymers and silica." In Photonics Fabrication Europe, edited by Alfred Driessen, Roel G. Baets, John G. McInerney, and Ephraim Suhir. SPIE, 2003. http://dx.doi.org/10.1117/12.472701.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Szekely, Vladimir. "Algorithmic solutions for thermal and electrostatic simulation of MEMS." In Photonics Fabrication Europe, edited by Uwe F. W. Behringer, Bernard Courtois, Ali M. Khounsary, and Deepak G. Uttamchandani. SPIE, 2003. http://dx.doi.org/10.1117/12.472702.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bernard, Pierre, Nathalie Gregoire, and Ghislain Lafrance. "Automated laser trimming for ultralow error function GFF." In Photonics Fabrication Europe, edited by Valerio Pruneri, Robert P. Dahlgren, and Gregory M. Sanger. SPIE, 2003. http://dx.doi.org/10.1117/12.472703.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhao, Luping, Koon G. Neoh, Sock W. Ng, and En T. Kang. "Photo-induced reaction of polyaniline with viologen in the solid state." In Photonics Fabrication Europe, edited by Yoseph Bar-Cohen. SPIE, 2003. http://dx.doi.org/10.1117/12.472705.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Fonjallaz, Pierre-Yves, Ola Gunnarsson, Mikhail Popov, Walter Margulis, Ingemar Petermann, David Berlemont, and Fredrik Carlsson. "Advanced components for microwave photonics." In Photonics Fabrication Europe, edited by Valerio Pruneri, Robert P. Dahlgren, and Gregory M. Sanger. SPIE, 2003. http://dx.doi.org/10.1117/12.472706.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hamacher, Michael, Ute Troppenz, Helmut Heidrich, and Dominik G. Rabus. "Active ring resonators based on GaInAsP/InP." In Photonics Fabrication Europe, edited by Alfred Driessen, Roel G. Baets, John G. McInerney, and Ephraim Suhir. SPIE, 2003. http://dx.doi.org/10.1117/12.472816.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schiattone, Francesco, Stefano Bonino, Luigi Gobbi, Angelamaria Groppi, Marco Marazzi, and Maurizio Musio. "Low cost, small form factor, and integration as the key features for the optical component industry takeoff." In Photonics Fabrication Europe, edited by Giancarlo C. Righini. SPIE, 2003. http://dx.doi.org/10.1117/12.472817.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Fabrication"

Blaedel, K. L. Fabrication Technology. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10194530.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Author, Not Given. Cohesive ceramic fabrication. Office of Scientific and Technical Information (OSTI), January 1989. http://dx.doi.org/10.2172/7169030.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Levesque, Stephen. Nuclear Fabrication Consortium. Office of Scientific and Technical Information (OSTI), April 2013. http://dx.doi.org/10.2172/1072951.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rajic, S. Micromechanical Structures Fabrication. Office of Scientific and Technical Information (OSTI), May 2001. http://dx.doi.org/10.2172/814244.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gibson, Joshem, Kelly Bingham, Thomas Smouse, and Frank Lopez. Vessel Fabrication Overview. Office of Scientific and Technical Information (OSTI), June 2021. http://dx.doi.org/10.2172/1798108.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wong, Amy. Glovebox Fabrication Pictures. Office of Scientific and Technical Information (OSTI), November 2023. http://dx.doi.org/10.2172/2228625.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Viola, M., T. Brown, P. Heitzenroeder, F. Malinowski, W. Reiersen, L. Sutton, P. Goranson, et al. NCSX Vacuum Vessel Fabrication. Office of Scientific and Technical Information (OSTI), October 2005. http://dx.doi.org/10.2172/899581.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Eric L. Shaber and Bradley J Schrader. MOX Fabrication Isolation Considerations. Office of Scientific and Technical Information (OSTI), August 2005. http://dx.doi.org/10.2172/911246.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bourell, D. L., J. J. Beaman, and Jr. Solid Freeform Fabrication Proceedings. Fort Belvoir, VA: Defense Technical Information Center, August 2001. http://dx.doi.org/10.21236/ada400355.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

JL Bump and RF Luther. Biaxial Creep Specimen Fabrication. Office of Scientific and Technical Information (OSTI), February 2006. http://dx.doi.org/10.2172/884675.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!