Добірка наукової літератури з теми "Energy conversion technologie"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Energy conversion technologie".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Energy conversion technologie"
Danso-Boateng, Eric, and Osei-Wusu Achaw. "Bioenergy and biofuel production from biomass using thermochemical conversions technologies—a review." AIMS Energy 10, no. 4 (2022): 585–647. http://dx.doi.org/10.3934/energy.2022030.
Повний текст джерелаRamasamy, R. P. "Bioelectrochemical Energy Conversion Technologies." Interface magazine 24, no. 3 (January 1, 2015): 53. http://dx.doi.org/10.1149/2.f03153if.
Повний текст джерелаHannan, M. A., Ali Q. Al-Shetwi, M. S. Mollik, Pin Jern Ker, M. Mannan, M. Mansor, Hussein M. K. Al-Masri, and T. M. Indra Mahlia. "Wind Energy Conversions, Controls, and Applications: A Review for Sustainable Technologies and Directions." Sustainability 15, no. 5 (February 22, 2023): 3986. http://dx.doi.org/10.3390/su15053986.
Повний текст джерелаYAMAMOTO, Toshikazu, Koji OGIKUBO, and Fujio TODA. "Development of teaching tool to learn energy conversion technology using mass production type Stirling engine." International Conference on Business & Technology Transfer 2010.5 (2010): 114–19. http://dx.doi.org/10.1299/jsmeicbtt.2010.5.0_114.
Повний текст джерелаZhu, Dibin. "Advance Energy Harvesting Technologies." Energies 15, no. 7 (March 24, 2022): 2366. http://dx.doi.org/10.3390/en15072366.
Повний текст джерелаAyub, Muhammad Waqas, Ameer Hamza, George A. Aggidis, and Xiandong Ma. "A Review of Power Co-Generation Technologies from Hybrid Offshore Wind and Wave Energy." Energies 16, no. 1 (January 3, 2023): 550. http://dx.doi.org/10.3390/en16010550.
Повний текст джерелаKeefer, Bowie G., and Douglas M. Ruthven. "Synergies between adsorption and energy conversion technologies." Adsorption 27, no. 2 (January 29, 2021): 151–66. http://dx.doi.org/10.1007/s10450-021-00297-w.
Повний текст джерелаHasatani, Masanobu. "Highly efficient conversion technologies for energy utilization." Energy Conversion and Management 38, no. 10-13 (July 1997): 931–40. http://dx.doi.org/10.1016/s0196-8904(96)00124-0.
Повний текст джерелаWeber, H., T. Hamacher, and T. Haase. "Network Requirements of Future Energy Conversion Technologies." IFAC Proceedings Volumes 36, no. 20 (September 2003): 369–74. http://dx.doi.org/10.1016/s1474-6670(17)34495-6.
Повний текст джерелаMurata, Akinobu, and Seijiro Ihara. "A Method of Synthesizing Energy Conversion Technologies from Elementary Conversion Processes." IEEJ Transactions on Electronics, Information and Systems 114, no. 6 (1994): 689–96. http://dx.doi.org/10.1541/ieejeiss1987.114.6_689.
Повний текст джерелаДисертації з теми "Energy conversion technologie"
Yu, Xiaoting. "Transformation of Nanocrystals in Electrochemical Energy Technologies." Doctoral thesis, Universitat de Barcelona, 2020. http://hdl.handle.net/10803/670922.
Повний текст джерелаEsta tesis se centra en la síntesis de diferentes tipos de nanocristales, su aplicación a las tecnologías de conversión y almacenamiento de energía, particularmente LIBs, KIBs y DEFCs, y su transformación estructural durante los procesos electroquímicos dentro de estas aplicaciones de almacenamiento y conversión de energía. La morfología y composición de nanocristales de óxidos de metales de transición, bimetálicos e intermetálicos que incroporan fósforo se caracterizan en detalle para seguir las alteraciones durante la aplicación. La comprensión de la correlación entre las propiedades estructurales, químicas y electroquímicas permitirá un diseño más racional de nanomateriales funcionales. El primer capítulo ofrece una introducción general al rápido desarrollo y la importancia de las tecnologías de energía renovable en la sociedad moderna. Entre ellas, las tecnologías de conversión y almacenamiento de energía electroquímica son particularmente atractivas en términos de costo, seguridad y respeto al medio ambiente. Se discuten los principios básicos de las tecnologías de baterías de iones de litio, sodio y potasio, incluidas las estructuras de las baterías, los materiales de los electrodos y los mecanismos de trabajo. Además, describo el principio de funcionamiento de las DEFCs y el EOR electrocatalítico. También se explican las estrategias para sintetizar nanocristales de alto rendimiento para aplicaciones de almacenamiento y conversión de energía electroquímica. Finalmente, en este capítulo discuto el fenómeno de la evolución estructural y química de los nanocristales durante las operaciones electroquímicas y cómo se necesita su caracterización en cada sistema para una comprensión profunda de las propiedades y aplicaciones de los nanomateriales. El capítulo 1 también incluye los objetivos de la tesis. El Capítulo 2 describe un método de crecimiento simple mediado por semillas a baja temperatura para crecer Mn3O4 en nanoparticulas huecas de Fe3O4. Se lleva a cabo un proceso de sinterizado a temperatura moderada (500 °C) para promover la reacción en estado sólido de las NPs y obtener partículas huecas de MnxFe3-xO4. Al ser usados como materiales de electrodo anódico, la cubierta policristalina, el espacio vacío interno y la gran área de superficie de las NPs de MnxFe3-xO4 pueden amortiguar de manera efectiva el cambio de volumen de los nanocristales durante el proceso de litiación y delitizacion para mejorar la estabilidad y la vida útil del ciclo. Se evalúa la actividad electroquímica de las NPs de MnxFe3- xO4 hacia la reacción de litio y se explora la relación entre la estructura y las propiedades electroquímicas. El excelente rendimiento de las NPs huecas de MnxFe3-xO4 está asociado con su estructura y composición cristalinas, y con la presencia de ligandos carbonizados, que promueven aún más la conductividad eléctrica y acomodan y liberan rápidamente iones de litio mientras retienen una estructura estable incluso después de ciclos continuos de carga/descarga . Este trabajo fue publicado en Nano Energy en 2019. El Capítulo 3 vesra sobre el rendimiento de los NPs bimetálicos como ánodos en LIBs y KIBs. NPs monodispersas de CoSn y NiSn se sintetizan mediante co-reducción y se soportan en materiales comerciales de carbono. Los nanocompuestos obtenidos se prueban como materiales anódicos en LIBs de media celda y KIBs y LIBs de celda completa. Los electrodos CoSn@C muestran excelentes capacidades de carga y descarga en media celda y celdas completas LIB. Las capacidades para KIB se estabilizan alrededor de 200 mAh g-1 con alta eficiencia culombiana durante 400 ciclos para CoSn@C y 100 mAh g-1 para NiSn@C durante 300 ciclos. La oxidación de las NPs, la formación de la capa SEI, el vasto cambio de volumen durante la litiación y la delitiación causaron la disminución de las capacidades. Este trabajo fue publicado en ACS Applied Materials & Interfaces en 2020. En el capítulo 4, se detalla un enfoque simple para producir nanocubos intermetálicas de Pd3Pb con geometría cúbica bien definida y un tamaño promedio de 6 nm a 10 nm. Los catalizadores de Pd3Pb/C presentan actividades y estabilidades electrocatalíticas EOR mejoradas. La actividad EOR de las NPs de Pd3Pb se investiga en función de su tamaño a través de técnicas CV y CA. Todos los catalizadores exhiben una disminución de corriente pronunciada durante los primeros 500 s de operación EOR continua, que está asociada con la acumulación de intermedios de reacción fuertemente adsorbidos y el bloqueo relacionado de los sitios de reacción. Los catalizadores pueden reactivarse simplemente ciclando para eliminar eficazmente las especies adsorbidas en la superficie y recuperar la actividad electrocatalítica. Una reorganización de los elementos Pd y Pb ocurre en las NPs de Pd3Pb durante EOR, lo que implica una difusión hacia afuera/hacia adentro de Pd/Pb para equilibrar la estequiometría de la superficie de los NCs, que es impulsada por la diferente afinidad de Pb y Pd hacia el oxígeno y posiblemente el etanol, y la oxidación/reducción electroquímica de Pd. Este trabajo fue publicado en Chemistry of Materials en 2020. El Capítulo 5 demuestra la síntesis de NRs coloidales de Pd2Sn que incorporan P a través de la fosforización de las NPs de Pd2Sn con un reactivo altamente activo. El catalizador Pd2Sn:P/C exhibe una actividad significativamente mejorada hacia EOR en medios alcalinos en comparación con Pd2Sn/C, PdP2/C y catalizadores comerciales de Pd/C. La mejora del rendimiento se racionaliza con la ayuda de los cálculos de DFT teniendo en cuenta los diferentes entornos químicos de fósforo. Dependiendo de su estado de oxidación, el fósforo superficial introduce sitios con adsorción de OH de baja energía y/o influye fuertemente en la estructura electrónica del paladio y el estaño para facilitar la oxidación del acetilo al ácido acético, que se considera el paso limitante de la tasa de EOR. El Pd2Sn:P se caracteriza por una superficie rica en Sn y P, que se correlaciona bien con los porcentajes más altos de estaño oxidado y fósforo, y la mayor tendencia a la oxidación de Sn en comparación con Pd. Los cálculos de DFT demuestran que la presencia de P puede inducir una mayor adsorción química de OH- para facilitar la formación de CH3COOH, lo que resulta en un aumento de la actividad EOR. Este trabajo fue aceptado en Nano Energy en 2020.
Reynaud, Jean-François. "Recherches d'optimums d'énergie pour charge/décharge d'une batterie à technologie avancée dédiée à des applications photovoltaïques." Phd thesis, Université Paul Sabatier - Toulouse III, 2011. http://tel.archives-ouvertes.fr/tel-00559630.
Повний текст джерелаConceição, Ricardo Filipe Carrão da. "Soiling in solar energy conversion technologies: assessment and mitigation." Doctoral thesis, Universidade de Évora, 2019. http://hdl.handle.net/10174/25527.
Повний текст джерелаLiu, Junfeng. "Colloidal Metal Phosphide Nanocrystals for Electrochemical Energy Technologies." Doctoral thesis, Universitat de Barcelona, 2019. http://hdl.handle.net/10803/666970.
Повний текст джерелаLos fosfuros metálicos son materiales funcionales de gran interés e impacto en la sociedad debido a su gran rendimiento en almacenamiento y conversión de energía. Sin embargo, la síntesis de nanopartículas de fosfuros metálicos y su escalabilidad es limitada. En la presente tesis, se ha desarrollado un proceso de producción para nanopartículas de fosfuros metálicos simple, escalable y rentable. El éxito de los resultados radica en el uso de fosfito de trifenilo, considerado como una fuente de fósforo barata, estable al contacto con el aire y no tóxica, que además permite la síntesis de una gran variedad de nanocristales (NCs) (fosfuros de Ni, Co, Cu, Fe, Mo, así como fosfuros ternarios de Ni2-xCoxP). Optimizando los parámetros experimentales, es posible producir NCs de diferente composición, morfología y tamaño. Además, el uso de solventes de alto punto de ebullición, facilita la síntesis de materiales menos estudiados como el CrP. Los NCs de Ni2-xCoxP y CrP NCs pueden ser combinados con carbono dando lugar a electrocatalizadores útiles para reacciones tales como evolución de hidrógeno y reducción de oxígeno, respectivamente. El uso de otras fuentes de fósforo, como por ejemplo la triamida de hexametilfósforo, permite a su vez producir NCs de SnP y PdP2. En el caso particular de SnP, los NCs demostraton poseer una geometría esférica y una fase cristalográfica trigonal con una superestructura atribuida a los pares difósforos ordenados. Mezclados con carbón negro y utilizados como ánodos en baterías de ion sodio, estos NCs demostraron una alta capacidad reversible de 600 mA h g-1 a una densidad de corriente de 100 mA g-1 y estables durante más de 200 ciclos. Por otro lado, los NCs de PdP2 soportados sobre óxido de grafeno se utilizaron como electrocatalizadores para la oxidación de etanol, mostrando una alta densidad de corriente de hasta 51.4 mA cm-2 y una actividad de masa de 1.60 A mg-1Pd. En resumen, se han desarrollado métodos de síntesis basados en estrategias coloidales para poder producir una gran variedad de fosfuros metálicos a escala nanométrica, mostrando estos un gran rendimiento para su uso en conversión y almacenamiento de energía electroquímica.
Mousselmal, Hadj Daoud. "Conception de dispositifs piézoélectriques de récupération d’énergie utilisant des structures multidirectionnelles et nanostructurés." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0124.
Повний текст джерелаThis thesis work focuses on the development of new piezoelectric energy recovery systems from environmental mechanical vibration. The goal is to provide solutions to some strong constraints on the miniaturization of these systems, their integration in MEMS technology. The 2 major lines followed in this work are: (i) the nanostructuring by porosification silicon substrate. This method allows to create functionalized areas having local properties of density and lower rigidity than those of the silicon substrate. This allows on the one hand to improve the overall electromechanical coupling coefficient of the structure and, secondly, to maintain the resonant frequency of the operational mode in a low frequency range (< 1KHz) compatible with the spectrum of Many conventional vibratory sources. A series of finite element modeling of a type converter (beam with seismic mass) established the optimum dimensional parameters of nanostructured area. The effectiveness of this localized nanostructuring method was then evaluated experimentally on silicon membranes. It was observed a reduction of the resonance frequency of the fundamental mode, while minimizing losses by a judicious choice of the location and the width of the porous zone. (Ii) The development of recovery devices multidirectional sensitivity. These devices allow to recover energy regardless of the direction of the external load. They use 3 different eigenmodes bending each solicited by a particular component (ax, ay and az) vector solicitation characteristic acceleration. These devices based on a planar structure type double orthogonal beams with central seismic mass can be easily integrated and can be broken down to centimeter scale at the millimeter scale using in this case the MEMS technologies. A simple analytical model was first updated energy mechanisms that enable a constant amount of energy when the device is subjected to a bias vector in any direction. The optimization of the electromechanical coupling coefficient of each functional mode, and the adjustment of their resonance frequency were obtained using a finite element model. All these theoretical results has been experimentally validated using centimeter prototypes
Mary, Charlotte. "Physico-chemistry, high pressure rheology and film-forming capacity of polymer-base oil solutions in EHL." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0013/document.
Повний текст джерелаThe development of high value-added lubricants overcoming more and more drastic operating conditions, fuel-efficient and providing excellent performance during a long time remains a huge challenge for oil makers. This thesis is dedicated to the study of the role and the actions of Viscosity Index Improvers (VII) in engine lubricants. The first objective targeted in this work is the characterization of the rheological behaviors and the modeling of viscosity in function of realistic conditions of temperature, pressure and shear stress for polymer-thickened base oil solutions without functional additives. Several polymers (PAMA, OCP and PISH) with different molecular weights and conformations (comb, linear and star) are used with a concentration of 1.2% (w/w) in a hydrocracked mineral base oil. The originality of the thesis lies in the use of non-commercial rheometers under high pressure (up to 800 MPa). A second challenge is the understanding of the relationship between the rheological response of simplified engine lubricants and the mechanisms occurring at the molecular scale by exploring the notions of conformation, solubility and hydrodynamic radius by the extension of the Einstein’s law at high pressure. Finally, the study focuses on the link between rheology and tribology and by extrapolation, between the chemical composition of the lubricant and tribology. The film thickness is measured and compared with the Hamrock-Dowson analytical predictions and with the numerical simulations based on the generalized Reynolds’ equation including the rheological models. Both experimental and numerical data are in good agreement
Haboubi, Walid. "Développements de circuits Rectennae bi-polarisation, bi-bande pour la récupération et conversion d’énergie électromagnétique à faible niveau." Thesis, Paris Est, 2014. http://www.theses.fr/2014PEST1089/document.
Повний текст джерелаImproving energy autonomy of communication systems constitutes one of the major concerns for their massive deployment in our environment. We want to make these electronic devices (sensors and sensor networks) completely autonomous, avoiding the embedded energy sources that require replacement operations or periodic charging. Among the available energy sources that can be harvested, there are electromagnetic waves. The device that can capture this energy and convert it into useful DC power is called Rectenna (Rectifying antenna), combining antenna with diode-based rectifier. In recent few years, rectennas have reached a significant number of papers in the literature. The main challenge consists in improving performances in term of efficiency, in an attempt to overcome the electromagnetic wave attenuation and the low available field level. According to this context, this PhD work supported by the ANR project REC-EM has taken place. In this study, we have developed, designed and characterized planar structures that have interesting properties:- In term of orthogonal polarizations, so energy harvesting becomes feasable regardless the arbitrary orientation of the incident wave on the rectenna. A dual-circularly polarized rectenna at 2.45 GHz with dual-access will be set up to overcome the 3 dB power loss in the case of linearly-polarized incident wave with unknown orientation.- In term of multiple resonances, so the amount of total RF power collected by the antenna can be increased and consequently the converted DC power level can also be improved. A dual-frequency rectenna (1.8 and 2.45 GHz) with single access will be designed, as well as a rectenna based upon a dual-frequency antenna array.- In term of size compactness by avoiding the use of the HF filter between the antenna and the rectifier for all developed rectenna structures during this work. In all cases, it will be necessary to define the most suitable rectifier topology to each antenna and select, if it is appropriated, the optimum DC recombination technique to overcome the effects of RF power imbalance that may occur between the different antenna accesses. Besides, single-diode circuits will be designed and fulfilled for each structure. Finally, we will miniaturize the dual-circularly polarized dual-access antenna, and exploit it to power a LCD display temperature sensor. To enhance the DC voltage level required to activate the sensor, a DC-DC converter is inserted between the rectenna and the sensor. Such energy management device should be able to operate under low delivered DC power. Two converters will be used. The first one is developed by Ampere Lab at Ecole Centrale de Lyon and SATIE Lab at ENS Cachan. This converter was the subject of another dissertation also supported by the ANR under the REC-EM project
Grabbe, Mårten. "Marine Current Energy Conversion : Resource and Technology." Licentiate thesis, Uppsala University, Electricity, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-113365.
Повний текст джерелаGrabbe, Mårten. "Hydro-Kinetic Energy Conversion : Resource and Technology." Doctoral thesis, Uppsala universitet, Elektricitetslära, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-195942.
Повний текст джерелаMalik, Mohammad Rafi. "Reduced-orderCombustion Models for Innovative Energy Conversion Technologies." Doctoral thesis, Universite Libre de Bruxelles, 2021. https://dipot.ulb.ac.be/dspace/bitstream/2013/318799/4/TOC.pdf.
Повний текст джерелаLe double défi de l'énergie et du changement climatique mettent en avant lanécessité de développer des nouvelles technologies de combustion, étantdonné que les projections les plus réalistes montrent que la plus grandeaugmentation de l'offre d'énergie pour les décennies à venir se fera à partirde combustibles fossiles. Ceci représente donc une forte motivation pour larecherche sur l'efficacité énergétique et les technologies propres. Parmicelles-ci, la combustion sans flamme est un concept nouvellementdéveloppé qui permet d'obtenir des rendements thermiques élevés avecdes économies de carburant tout en maintenant les émissions polluantes àun niveau très bas. L'intérêt croissant pour cette technologie est égalementmotivé par sa grande flexibilité de carburant, ce qui représente uneprécieuse opportunité pour les carburants à faible valeur calorifique, lesdéchets industriels à haute valeur calorifique et les combustibles à based'hydrogène. Etant donné que cette technologie est plutôt récente, elle estde ce fait encore mal comprise. Les solutions d'une application industriellesont très difficiles à transposer à d'autres. Pour améliorer les connaissancesdans le domaine de la combustion sans flamme, il est nécessaire de menerdes études fondamentales sur ce nouveau procédé de combustion afin defavoriser son développement. En particulier, il y a deux différencesmajeures par rapport aux flammes classiques :d’une part, les niveaux deturbulence rencontrés dans la combustion sans flamme sont rehaussés, enraison des gaz de recirculation, réduisant ainsi les échelles de mélange.D'autre part, les échelles chimiques sont augmentées, en raison de ladilution des réactifs. Par conséquent, les échelles turbulentes et chimiquessont du même ordre de grandeur, ce qui conduit à un couplage très fort.Après un examen approfondi de l'état de l'art sur la modélisation de lacombustion sans flamme, le coeur du projet représentera le développementd'une nouvelle approche pour le traitement de l'interaction turbulence /chimie pour les systèmes sans flamme dans le contexte des simulationsaux grandes échelles (Large Eddy Simulations, LES). Cette approche serafondée sur la méthode PCA (Principal Component Analysis) afin d'identifierles échelles chimiques de premier plan du processus d'oxydation. Cetteprocédure permettra de ne suivre sur la grille LES qu'un nombre réduit descalaires non conservés, ceux contrôlant l'évolution du système. Destechniques de régression non-linéaires seront couplées avec PCA afind’augmenter la précision et la réductibilité du modèle. Après avoir été validégrâce à des données expérimentales de problèmes simplifiés, le modèlesera mis à l'échelle afin de gérer des applications plus grandes, pertinentespour la combustion sans flamme. Les données expérimentales etnumériques seront validées en utilisant des indicateurs de validationappropriés pour évaluer les incertitudes expérimentales et numériques.
Doctorat en Sciences de l'ingénieur et technologie
info:eu-repo/semantics/nonPublished
Книги з теми "Energy conversion technologie"
1946-, Parker Colin, Roberts Tim, Commission of the European Communities. Directorate-General for Environment, Consumer Protection, and Nuclear Safety., and Environmental Resources Limited, eds. Energy from waste: An evaluation of conversion technologies. London: Elsevier Applied Science Publishers, 1985.
Знайти повний текст джерелаRüdiger, Mautz, ed. Renewable energies. London: Routledge, Taylor & Francis Group, 2015.
Знайти повний текст джерелаauthor, Tabatabaian Mehrzad, ed. Direct energy conversion technologies. Dulles, Virginia: Mercury Learning & Information, 2020.
Знайти повний текст джерелаE, Salvagin Carlton, ed. Energy technologies and conversion systems. Englewood Cliffs, N.J: Prentice Hall, 1986.
Знайти повний текст джерелаLiu, Ru-Shi, Lei Zhang, Xueliang Sun, Hansan Liu, and Jiujun Zhang, eds. Electrochemical Technologies for Energy Storage and Conversion. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527639496.
Повний текст джерела1931-, Branover Herman, and Unger Yeshajahu, eds. Metallurgical technologies, energy conversion, and magnetohydrodynamic flows. Washington, DC: American Institute of Aeronautics and Astronautics, 1993.
Знайти повний текст джерелаV, Peinemann K., and Nunes S. P, eds. Membranes for energy conversion. Weinheim: Wiley-VCH, 2008.
Знайти повний текст джерелаKimes, Laura. Biomass conversion: Emerging technologies, feedstocks, and products. Washington, D.C: Sustainability Program, Office of Research and Development, U.S. Environmental Protection Agency, 2007.
Знайти повний текст джерелаInman, D. J., and Shashank Priya. Energy harvesting technologies. New York: Springer, 2009.
Знайти повний текст джерелаR, Ramesh, Udayakumar K, and Anandakrishnan M, eds. Renewable energy technologies: Ocean thermal energy conversion and other sustainable energy options. New Delhi: Narosa, 1997.
Знайти повний текст джерелаЧастини книг з теми "Energy conversion technologie"
Chamberlain, Jeffrey P., Roel Hammerschlag, and Christopher P. Schaber. "Energy Storage Technologies *." In Energy Conversion, 497–523. Second edition. | Boca Raton : CRC Press, 2017. | Series:: CRC Press, 2017. http://dx.doi.org/10.1201/9781315374192-17.
Повний текст джерелаSerrano-Ruiz, Juan Carlos. "Biomass Conversion Technologies: Catalytic Conversion Technologies." In Lecture Notes in Energy, 113–21. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-48288-0_5.
Повний текст джерелаKok, Kenneth D., and Edwin A. Harvego. "Nuclear Power Technologies through Year 2035." In Energy Conversion, 455–90. Second edition. | Boca Raton : CRC Press, 2017. | Series:: CRC Press, 2017. http://dx.doi.org/10.1201/9781315374192-15.
Повний текст джерелаWolff, Lodwijk Reiner, and Valerylvanovit Yarigin. "Thermionic Energy Conversion, Space Technology for Energy Conservation." In Conversion, 199–206. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-95701-7_32.
Повний текст джерелаMessenger, Roger, D. Yogi Goswami, Hari M. Upadhyaya, Senthilarasu Sundaram, Aruna Ivaturi, Stephan Buecheler, and Ayodhya N. Tiwari. "Photovoltaics Fundamentals, Technology and Application." In Energy Conversion, 765–850. Second edition. | Boca Raton : CRC Press, 2017. | Series:: CRC Press, 2017. http://dx.doi.org/10.1201/9781315374192-20.
Повний текст джерелаBronicki, Lucien Y. "Geothermal Power Conversion Technology geothermal power conversion technology." In Renewable Energy Systems, 818–923. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-5820-3_233.
Повний текст джерелаErselcan, İlkay Özer, Doğuş Özkan, Egemen Sulukan, and Tanay Sıdkı Uyar. "Wave Energy Conversion Technologies." In Renewable Energy Based Solutions, 345–61. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05125-8_14.
Повний текст джерелаKumara Behera, Basanta, and Ajit Varma. "Microbial Energy Conversion Technology." In Microbial Resources for Sustainable Energy, 1–33. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33778-4_1.
Повний текст джерелаGouveia, Luisa, and Paula C. Passarinho. "Biomass Conversion Technologies: Biological/Biochemical Conversion of Biomass." In Lecture Notes in Energy, 99–111. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-48288-0_4.
Повний текст джерелаPavlovic, Tomislav, Plamen Ts Tsankov, Nikola Dj Cekić, and Ivana S. Radonjić Mitić. "Photovoltaic Solar Energy Conversion." In The Sun and Photovoltaic Technologies, 45–193. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22403-5_2.
Повний текст джерелаТези доповідей конференцій з теми "Energy conversion technologie"
Surendranath, Yogesh, Matthew W. Kanan, and Daniel G. Nocera. "New Opportunities for Direct Light-to-Fuel Energy Conversion." In Optics and Photonics for Advanced Energy Technology. Washington, D.C.: OSA, 2009. http://dx.doi.org/10.1364/energy.2009.thb7.
Повний текст джерелаKeding, Marcus, Ivanhoe Vasiljevich, Piotr Dudzinski, Martin Tajmar, and J. Gerger. "Development of Innovative Micro Power Converter Technologies at the Austrian Institute of Technology." In 7th International Energy Conversion Engineering Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/6.2009-4522.
Повний текст джерелаStoller, Paul J., and Walter R. Niessen. "Lessons Learned From the 1970s Experiments in Solid Waste Conversion Technologies." In 17th Annual North American Waste-to-Energy Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/nawtec17-2348.
Повний текст джерела"Session TH17: Wind energy conversion technologies III." In 2008 IEEE Power Electronics Specialists Conference. IEEE, 2008. http://dx.doi.org/10.1109/pesc.2008.4592676.
Повний текст джерела"Session TU21: Wind energy conversion technologies II." In 2008 IEEE Power Electronics Specialists Conference. IEEE, 2008. http://dx.doi.org/10.1109/pesc.2008.4592195.
Повний текст джерела"Session MO5: Wind energy conversion technologies I." In 2008 IEEE Power Electronics Specialists Conference. IEEE, 2008. http://dx.doi.org/10.1109/pesc.2008.4591906.
Повний текст джерелаChen, F. C., and R. J. Fiskum. "Test and Operation of a PEM Fuel Cell Power System." In International Joint Power Generation Conference collocated with TurboExpo 2003. ASMEDC, 2003. http://dx.doi.org/10.1115/ijpgc2003-40166.
Повний текст джерелаEbhota, Williams S., and Tien-Chien Jen. "Photovoltaic Solar Energy: Potentials and Outlooks." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-86991.
Повний текст джерелаBasso, Thomas. "Photovoltaics - Technology providing global energy solutions." In Intersociety Energy Conversion Engineering Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-3859.
Повний текст джерелаHotz, Nico. "Nano-Structured Catalytic Material for Solar-Powered Biofuel Reforming." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89729.
Повний текст джерелаЗвіти організацій з теми "Energy conversion technologie"
Johnston, Sweyn, John McGlynn, Veronica R. Prado, and Joseph Williams. Ocean Energy in the Caribbean: Technology Review, Potential Resource and Project Locational Guidance. Inter-American Development Bank, November 2021. http://dx.doi.org/10.18235/0003783.
Повний текст джерелаRochau, Gary E. Advanced Reactor Technology/Energy Conversion Project FY17 Accomplishments. Office of Scientific and Technical Information (OSTI), February 2018. http://dx.doi.org/10.2172/1423535.
Повний текст джерелаEJ Brown, PF Baldasaro, SR Burger, LR Danielson, DM DePoy, JM Dolatowski, PM Fourspring, GJ Nichols, WF Topper, and TD Rahmlow. The Status of Thermophotovoltaic Energy Conversion Technology at Lockheed Martin Corporation. Office of Scientific and Technical Information (OSTI), July 2004. http://dx.doi.org/10.2172/837657.
Повний текст джерелаE.J. Brown, P.F. Baldasaro, S.R. Burger, L.R. Danielson, D.M. DePoy, G.J. Nichols, W.F. Topper, and T.D. Rahmlow. The Status of Thermophotovoltaic Energy Conversion Technology at Lockheed Martin Corp. Office of Scientific and Technical Information (OSTI), January 2003. http://dx.doi.org/10.2172/821963.
Повний текст джерелаKoziel, Jacek, Yael Laor, Jeffrey Zimmerman, Robert Armon, Steven Hoff, and Uzi Ravid. Simultaneous Treatment of Odorants and Pathogens Emitted from Confined Animal Feeding Operations (CAFOs) by Advanced Oxidation Technologies. United States Department of Agriculture, January 2009. http://dx.doi.org/10.32747/2009.7592646.bard.
Повний текст джерелаHashimoto, Andrew G., Susan Crow, Barbara DeBeryshe, Richard Ha, Lee Jakeway, Samir Khanal, Mae Nakahata, et al. Development of High Yield Feedstocks and Biomass Conversion Technology for Renewable Energy. Office of Scientific and Technical Information (OSTI), April 2015. http://dx.doi.org/10.2172/1177688.
Повний текст джерелаFine, H. A. Thermal insulation research plan for the Energy Conversion and Utilization Technologies (ECUT) materials program. Office of Scientific and Technical Information (OSTI), August 1986. http://dx.doi.org/10.2172/5076356.
Повний текст джерелаEberhardt, J. J., M. E. Gunn, and T. M. Levinson. Systems analysis research for energy conversion and utilization technologies (ECUT). FY 1985 annual report. Office of Scientific and Technical Information (OSTI), November 1985. http://dx.doi.org/10.2172/6493177.
Повний текст джерелаKolodziejczyk, Bart. Unsettled Issues Concerning the Use of Green Ammonia Fuel in Ground Vehicles. SAE International, February 2021. http://dx.doi.org/10.4271/epr2021003.
Повний текст джерелаDrost, M. K., and J. R. Zaworski. Review of second law analysis techniques applicable to the Energy Conversion and Utilization Technologies Thermal Sciences Program. Office of Scientific and Technical Information (OSTI), June 1989. http://dx.doi.org/10.2172/6105365.
Повний текст джерела