Готові списки джерел за темами / Electron-beam technologies

Добірка наукової літератури з теми "Electron-beam technologies"

Автор: Grafiati
Опубліковано: 30 травня 2022
Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Electron-beam technologies".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Electron-beam technologies"

1

Nesterenkov, V. M., K. S. Khripko, and V. A. Matviichuk. "Electron beam technologies of welding, surfacing, prototyping: results and prospects." Paton Welding Journal 2018, no. 12 (December 28, 2018): 126–33. http://dx.doi.org/10.15407/tpwj2018.12.14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Semenov, Yu I., O. N. Alyakrinskiy, D. Yu Bolkhovityanov, T. A. Devyataykina, M. Yu Kosachev, P. V. Logachev, E. A. Cooper, et al. "Laser-heated cathode electron beam source for electron beam technologies." Welding International 36, no. 4 (February 23, 2022): 220–25. http://dx.doi.org/10.1080/09507116.2022.2033440.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Nesterenkov, V. M., V. A. Matvejchuk, and M. O. Rusynik. "Manufacture of industrial products using electron beam technologies for 3D-printing." Paton Welding Journal 2018, no. 1 (January 28, 2018): 24–28. http://dx.doi.org/10.15407/tpwj2018.01.05.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Alyackrinskiy, O. N., M. A. Batazova, D. Yu Bolkhovityanov, M. Yu Kosachev, P. V. Logatchov, A. M. Medvedev, Yu I. Semenov, M. M. Sizov, A. A. Starostenko, and A. S. Tsygunov. "Prototype of electron source with magnetic beam rotation for electron beam technologies." NAUCHNOE PRIBOROSTROENIE 29, no. 1 (February 25, 2019): 026–32. http://dx.doi.org/10.18358/np-29-1-i2632.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Starkov, I. N., K. A. Rozhkov, T. V. Olshanskaya, D. N. Trushnikov, and I. A. Zubko. "Expansion of technological capabilities of the electron beam welding installation." Journal of Physics: Conference Series 2077, no. 1 (November 1, 2021): 012021. http://dx.doi.org/10.1088/1742-6596/2077/1/012021.

Повний текст джерела
Анотація:
Abstract The direction of electron beam technologies is promising and is rapidly developing. Quite recently, the electron beam was a tool for welding, and nowadays, electron-beam additive technologies and beam hardening technologies have become widespread. At the moment, there is no electron beam system that unites all these technologies. Expensive equipment has been developed to implement each technology. The article deals with expanding the technological capabilities of the 15E1000 electron-beam welding installation in order to implement new methods and techniques for processing metals with an electron beam.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

GOTOH, Yasuhito. "Expecting Further Development of Electron Beam Technologies." Vacuum and Surface Science 63, no. 1 (January 10, 2020): 2. http://dx.doi.org/10.1380/vss.63.2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zaleski, V. G., I. L. Pobol, A. A. Bakinouski, and A. D. Gubko. "METAL PARTS MANUFACTURING BY ELECTRON BEAM ADDITIVE TECHNOLOGIES." Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 63, no. 2 (July 3, 2018): 169–80. http://dx.doi.org/10.29235/1561-8358-2018-63-2-169-180.

Повний текст джерела
Анотація:
General information about development of additive technologies, as well as an overview of the main schema- tics of layer by layer manufacturing of metal products is presented. The technologies and equipment for electron beam layerby-layer production of metal products using wire and powder as a raw material is described. Experimental data obtained by the authors as a result of electron beam additive manufacturing of low-carbon steel, stainless austenitic steel and technical titanium samples are described. Relations between the product geometry and the electron beam main parameters are obtained. The analysis of microstructures is carried out. The main zones formed in the samples fabricated by this method are described. It is shown that typical microstructure of stainless steel samples consists of the large dendrites with main axes up to a few millimeters in the direction of heat sink. In a pure titanium, in addition to the characteristic coarse-grained (up to several millimeters in diameter) structure, there are zones where a lamellar structure with colonies of about 1 mm is observed, as well as a zone in the form of a strip about 1 mm wide along the walls, which is an acicular structure. This is obviously related to the cooling mode, since the character of the heat sink along the edges of the sample differs from the central zones. The analysis of electron beam additive technologies prospects is carried out. Examples of electron beam additive technology using in modern fabrication of accelerator technics, aircraft and machine building are demonstrated.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Koshlakov, V. V., and R. N. Rizakhanov. "On the role of electron beam scattering in additive technologies." Physics and Chemistry of Materials Treatment, no. 3 (2020): 48–52. http://dx.doi.org/10.30791/0015-3214-2020-3-48-52.

Повний текст джерела
Анотація:
The prospects of using combined-type installations equipped with laser and electron-beam sources in the field of additive technologies are shown. The problem of broadening of the electron beam acting on the surface of the workpiece in a vacuum medium due to its scattering by particles of the evaporating material is considered. An analytical solution is obtained of the paraxial equation of the envelope of an electron beam undergoing scattering in the atmosphere of evaporated particles. The conditions are established that ensure stable transportation of the electron beam to the surface to be treated.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Nesterenkov, V. M., V. A. Matvejchuk, M. O. Rusynik, and A. V. Ovchinnikov. "Application of additive electron beam technologies for manufacture of parts of VT1-0 titanium alloy powders." Paton Welding Journal 2017, no. 3 (March 28, 2017): 2–6. http://dx.doi.org/10.15407/tpwj2017.03.01.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Valkov, Stefan, Maria Ormanova, and Peter Petrov. "Electron-Beam Surface Treatment of Metals and Alloys: Techniques and Trends." Metals 10, no. 9 (September 10, 2020): 1219. http://dx.doi.org/10.3390/met10091219.

Повний текст джерела
Анотація:
During the last decades, electron-beam treatment technologies (EBTT) have been widely used for surface modification of metals and alloys. The EBT methods are known as accurate and efficient. They have many advantages in comparison with the conventional techniques, such as very short technological process time, uniform distribution of the energy of the electron beam, which allows a precise control of the beam parameters and formed structure and properties of the materials, etc. Moreover, electron-beam treatment technologies are a part of the additive techniques, which are known as modern methods for manufacturing of new materials with unique functional properties. Currently, modern trends in the surface treatment of metals and alloys are based on the combination of electron-beam technologies with other methods, such as thin film deposition, plasma nitriding, etc. This approach results in a significant improvement in the surface properties of the materials which opens new potential applications and can involve them into new industrial fields. This paper aims to summarize the topics related to the manufacturing and surface treatment of metals and alloys by means of electron-beam technologies. Based on a literature review, the development and growth of EBT are considered in details. The benefits of these technologies—as well as their combination with other methods—are extensively discussed.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Electron-beam technologies"

1

Ferhati, Arben. "Single-phase laminar flow heat transfer from confined electron beam enhanced surfaces." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/13827.

Повний текст джерела
Анотація:
The continuing requirement for computational processing power, multi-functional devices and component miniaturization have emphasised the need for thermal management systems able to maintain the temperature at safe operating condition. The thermal management industry is constantly seeking for new cutting edge, efficient, cost effective heat transfer enhancement technologies. The aim of this study is to utilize the electron beam treatment for the improvement of the heat transfer area in liquid cooled plates and experimentally evaluate the performance. Considering the complexity of the technology, this thesis focuses on the design and production of electron beam enhanced test samples, construction of the test facility, testing procedure and evaluation of thermal and hydraulic characteristics. In particular, the current research presented in this thesis contains a number of challenging and cutting edge technological developments that include: (1) an overview of the semiconductor industry, cooling requirements, the market of thermal management systems, (2) an integral literature review of pin-fin enhancement technology, (3) design and fabrication of the electron beam enhanced test samples, (4) upgrade and construction of the experimental test rig and the development of the test procedure, (5) reduction of the experimental data and analysis to evaluate thermal and hydraulic performance. The experimental results show that the capability of the electron beam treatment to improve the thermal efficiency of current untreated liquid cooled plates is approximately three times. The highest heat transfer rate was observed for the sample S3; this is attributed to the irregularities of the enhanced structure, which improves the heat transfer area, mixing, and disturbs the thermal and velocity boundary layers. Enhancement of heat transfer for all three samples was characterised by an increase of pressure drop. The electron beam enhancement technique is a rapid process with zero material waste and cost effective. It allows thermal management systems to be produced smaller and faster, reduce material usage, without compromising safety, labour cost or the environment.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Morken, Michael Owen Morken. "An Investigation Into The Feasibility Of Transparent Conductive Coatings At Visimax Technologies." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1496835960043161.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Zobač, Martin. "Řízení a diagnostika elektronového svazku pro pokročilé technologie." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-233899.

Повний текст джерела
Анотація:
The thesis deals with problems of control and diagnostics of electron beam technological devices which use electron beam for localised intensive heating of a material. A brief description of the electron beam welder MEBW-60/2 is included; the author has participated on its development and implementation. Main topics are the analysis of deflection system properties and the measurement of current distribution of the beam (so-called beam profiles). Geometrical aberrations, hysteresis, stability and dynamics of a single-stage magnetic x-y deflection system are described. Suitable measurement procedures and correction methods are introduced. Methods of transverse and longitudinal beam profile acquisition is presented using successive sampling of the local current density of the beam by a modified Faraday cup. The data processing and evaluation of characteristic beam parameters are shown. The presented methods were verified by fourteen experiments using the electron beam welder. The methods have proven to be useful in practical evaluation of the device properties.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Vacek, Petr. "Modifikace vrstev deponovaných technologiemi HVOF a cold spray pomocí technologie elektronového paprsku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254211.

Повний текст джерела
Анотація:
The aim of this thesis was to modify microstructure and coating-substrate interface of CoNiCrAlY coatings deposited by HVOF and cold spray on Inconel 718 substrates. Electron beam remelting and annealing in a protective atmosphere were used to modify the coatings. Microstructure, chemical and phase composition were analyzed. The effect of beam current, transversal velocity and beam defocus on remelted depth was evaluated. As-sprayed microstructure and chemical composition of coatings were analyzed and compared with remelted samples. The effect of annealing of the as-sprayed and remelted samples was evaluated. Remelted layers exhibited dendritic structure. Chemical composition changed only after remelting of interface and part of a substrate. When only the coating was remelted, chemical composition remained the same. Phases coarsened after the annealing. Chemical composition changed after annealing due to the diffusion.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mareš, Jiří. "Modifikace charakteru rozhraní substrát-nástřik vrstev deponovaných technologiemi žárového nanášení pomocí technologie elektronového paprsku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231939.

Повний текст джерела
Анотація:
Tato práce je zaměřena na modifikaci charakteru rozhraní substrát-nástřik NiCrAlY povlaků nanesených pomocí technologie vodou stabilizované plazmy na substráty z oceli S235JRC+C. Přetavení žárové vrstvy elektronovým paprskem bylo zvoleno jako technologie pro modifikaci a dvě různé modifikace byly zkoumány. V práci byl proveden pokus o stanovení vlivu modifikací na adhezní vlastnosti nástřiku. Dále jsou v práci prezentovány analýzy mikrostruktury, fázového a chemického složení a mikrotvrdosti ve stavu před a po modifikaci. Během studie bylo zjištěno, že dochází ke změnám fázového složení jak během depozice, tak během modifikace elektronovým paprskem. Modifikace elektronovým paprskem způsobila roztavení oxidů původní mikrostruktury nástřiku, které následně rekrystalizovaly na povrchu modifikované vrstvy. Dalším získaným poznatkem bylo, že dochází ke snížení mikrotvrdosti po modifikaci, což bylo způsobeno odstraněním oxidů z mikrostruktury a promícháním materiálu substrátu a původního nástřiku. Adheze nástřiků v as sprayed stavu byla kvantifikována. V případě nástřiků modifikovaných elektronovým paprskem přesná kvantifikace nebyla možná, z důvodu předčasného porušení na rozhraní nástřik-adhezivní pojivo během adhezních testů.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Барсук, Іван Володимирович, Иван Владимирович Барсук, Ivan Volodymyrovych Barsuk, Олександр В`ячеславович Бондар, Александр Вячеславович Бондарь, Oleksandr Viacheslavovych Bondar, Олексій Олександрович Дрозденко, et al. "Application of simulation technologies to the investigation of the beam generating systems." Thesis, Sumy State University, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20807.

Повний текст джерела
Анотація:
A series of numerical calculations of electron beam generation in the threeelectrode electron-optical system has been performed with the help of the electromagnetic modeling FIT method both with the PBA technology. Effects of the initial blocking and ray laminarity failure have been modeled. Optimum electrode potentials have been obtained for generation of the low-energy intensive axial-symmetric electron beam with beam-crossover behind the last anode of electron gun. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/20807
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Тугай, Сергій Борисович. "Імпульсні режими роботи технологічних електронно-променевих гармат високовольтного тліючого розряду". Doctoral thesis, Київ, 2013. https://ela.kpi.ua/handle/123456789/6373.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Poczklán, Ladislav. "Modifikace kvazikrystalických kompaktů SPS pomocí technologie elektronového paprsku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-377885.

Повний текст джерела
Анотація:
The quasicrystals are characterized by unusual rotational symmetries that are not observed in the crystalline materials, which is the cause of their interesting material properties. Because of that a particular attention was paid to quasicrystalline structures in the literature research. The research also contains a description of electron beam technology, spark plasma sintering method and introduction to the problematics of wear. As the default materials for the experimental part were selected Titanium Grade 2 powder and Cristome A5 powder which was partially composed of quasicrystalline phase. The first series of samples was sintered only from powder Cristome A5. The second series was sintered from the mixture of 80 % Titanium Grade 2 powder and 20 % Cristome A5 powder. For the compaction of samples spark plasma sintering technology was selected. Samples were then systematically modified by electron beam and subjected to pin on disc tests. Samples modified at 750 °C had the best wear resistance. Samples modified at 1150 °C contained increased amount of quasicrystalline phase.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Chlupová, Monika. "Vlastnosti nástřiku slitinou Inconel na austenitickou ocel zhotoveného technologií kinetického naprašování po přetavení elektronovým paprskem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417156.

Повний текст джерела
Анотація:
This diploma thesis is focused on description of the properties of a layer of Inconel 718 applied on austenitic steel AISI 304 by the Cold Spray and subsequently remelted by electron beam. The first part presents the Cold Spray with its properties, advantages and disadvantages, and also describes the principle of electron beam remelting and other possible uses of electron beam, for example welding, drilling, heat treatment etc. The second part describes the material and the methods used for the preparation and evaluation of the samples. There are evaluated the porosity, microstructure and microhardness of the layers applied by the Cold Spray and these properties are further compared with the properties of the same layers remelted by electron beam. In conclusion, the results of the porosity of the layers applied by the Cold Spray are discussed with the literature and the results of electron beam remelting are only partially described here, because it was not possible to find literature about this topic. There are also suggestions for further research of the properties of this layers, which is necessary to know before implementing this method of producing layers for commercial production.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Hanáček, Josef. "Modifikace mikrostruktury hořčíkové slitiny Elektron 21 pomocí technologie elektronového paprsku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-377873.

Повний текст джерела
Анотація:
This work presents a basic research on the influence of electron beam technology modification on chemical, structural and phases changes of Elektron 21 magnesium alloy. The samples were systematically modified under various parameters of the electron beam and coatings on their respective surfaces were deposited via controlled plasma electrolytic oxidation (PEO) subsequently. The influence of the EB modification on the PEO coating formation was observed. Several samples with remelted fine-grained surface layer were obtained. Having a thickness of 10^1 to 10^3 µm, the average grain sizes in this layer were quantitatively evaluated. The performed EDS analysis revealed in identical chemical composition of the remelted surface layer and the original alloy material, despite the detected sample weight loss upon the EB treatment. XRD analysis revealed an increased content of Mg3(Nd,Gd) intermetallic phase in the remelted area. The PEO coatings were more compact and less porous as compared with their counterpart coatings on the original, unmodified alloy material.The results of the presented work showed, among others, a suitable microstructure and chemical composition of some of the modified samples that could potentially exhibit enhanced corrosion resistance as opposed to the unmodified material. The corrosion testing will be part of a follow-up study. More compact PEO coatings formed on some of the modified surface layers likely represent, too, a more durable variant as compared to the original material.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Electron-beam technologies"

1

Fontaine, Bruno M. La, and F. M. Schellenberg. Alternative lithographic technologies: 24-26 February 2009, San Jose, California, United States. Edited by SPIE (Society) and International SEMATECH. Bellingham, Wash: SPIE, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Resnick, Douglas J., and William Man-Wai Tong. Alternative lithographic technologies IV: 13-16 February 2012, San Jose, California, United States. Edited by SPIE (Society). Bellingham, Washington: SPIE, 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Herr, Daniel J. C. Alternative lithographic technologies II: 23-25 February 2010, San Jose, California, United States. Edited by SPIE (Society) and SEMATECH (Organization). Bellingham, Wash: SPIE, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Herr, Daniel J. C. Alternative lithographic technologies III: 1-3 March 2011, San Jose, California, United States. Edited by SPIE (Society). Bellingham, Wash: SPIE, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

International Conference on Electron Beam Technologies (3rd 1991 Varna (Bulgaria). International Conference on Electron Beam Technologies: 30 May - June 4, 1991, Varna, Bulgaria = [Mezhdunarodnai͡a︡ konferent͡s︡ii͡a︡ po ėlektronno-luchevym tekhnologii͡a︡m : Varna, Bolgarii͡a︡, 30 mai͡a︡ - 4 i͡u︡ni͡a︡ 1991]. [Sofia]: Bulgarian Academy of Sciences, Institute of electronics, 1991.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

International Conference on Electron Beam Technologies (1st 1985 Varna, Bulgaria). Mezhdunarodnai͡a︡ konferent͡s︡ii͡a︡ po ėlektronno luchevym tekhnologii͡a︡m: Bolgarii͡a︡, Varna, 26 mai͡a︡-2 ii͡u︡ni͡a︡ 1985 g. = International Conference on Electron Beam Technologies : Bulgaria, Varna, 26 May-2 Yune [sic] 1985. Sofii͡a︡: Izd-vo Bolgarskoĭ akademii nauk, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kyōkai, Nihon Tekkō. Bīmu riyō gijutsu no saikin no dōkō: Recent trend of beam application technologies. Tokyo: Nihon Tekkō Kyōkai, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Electron Beam Pasteurization and Complementary Food Processing Technologies. Elsevier, 2015. http://dx.doi.org/10.1016/c2013-0-16457-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Electron Beam Pasteurization and Complementary Food Processing Technologies. Woodhead Publishing, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Mackay, R. Scott. Emerging Lithographic Technologies 9. SPIE-International Society for Optical Engine, 2005.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Electron-beam technologies"

1

Taniguchi, Jun. "Electron-Beam Machining." In Micro/Nano Technologies, 555–75. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Taniguchi, Jun. "Electron-Beam Machining." In Micro/Nano Technologies, 1–21. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_17-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Taniguchi, Jun. "Electron-Beam Machining." In Micro/Nano Technologies, 1–21. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_17-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zenker, Rolf. "Electron Beam Surface Technologies." In Encyclopedia of Tribology, 923–40. Boston, MA: Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_723.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Wolff-Fabris, Felipe, Volker Altstädt, Ulrich Arnold, and Manfred Döring. "Electron Beam Curing Applied to Composite Molding Technologies." In Electron Beam Curing of Composites, 85–91. München: Carl Hanser Verlag GmbH & Co. KG, 2010. http://dx.doi.org/10.3139/9783446433465.003.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Murr, Lawrence E. "Laser and Electron Beam Melting Technologies." In Handbook of Materials Structures, Properties, Processing and Performance, 665–86. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-01815-7_40.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Murr, Lawrence E. "Laser and Electron Beam Melting Technologies." In Handbook of Materials Structures, Properties, Processing and Performance, 1–20. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-01905-5_40-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

D’Anna, E., G. Leggieri, A. Luches, and M. Martino. "Materials Processing with Pulsed Electron Beam." In High Energy Density Technologies in Materials Science, 89–103. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0499-6_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kuzelev, M. V., G. P. Mkheidze, A. A. Rukhadze, P. S. Strelkov, and A. G. Shkvarunets. "Electron Beam Generated Plasmas: Theory, Experiments, Applications." In Advanced Technologies Based on Wave and Beam Generated Plasmas, 391–428. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-017-0633-9_18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Vitale, S. A., K. Hadidi, D. R. Cohn, L. Bromberg, and and P. Falkos. "An Electron Beam Generated Plasma Reactor for Decomposition of Halogenated VOCs." In Emerging Technologies in Hazardous Waste Management 7, 23–31. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-5387-8_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Electron-beam technologies"

1

Polukonova, Anna E., Natalia N. Smirniagina, and Dorzho E. Dasheev. "MODELLING OF HEAT PROCESSES IN ELECTRON BEAM PROCESSING OF LOW-CARBON STEEL BY FOCUSED ELECTRON BEAM." In Innovative technologies in science and education. Buryat State University Publishing Department, 2015. http://dx.doi.org/10.18101/978-5-9793-0803-6-117-122.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Thoms, Stephen, Douglas S. Macintyre, and Yifang Chen. "Evaluation of Shipley UV5 resist for electron beam lithography." In Microelectronic Manufacturing Technologies, edited by Chris A. Mack and Tom Stevenson. SPIE, 1999. http://dx.doi.org/10.1117/12.346886.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Hori, Yoshikazu, Fumihiro Sogawa, and Makoto Kato. "Electron-beam writing system for holographic optical elements." In Advanced processing and characterization technologies. AIP, 1991. http://dx.doi.org/10.1063/1.40655.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Nistor, M., E. Dewald, Mihai Ganciu, N. B. Mandache, Anne-Marie Pointu, I. Iovitz Popescu, and Y. Vitel. "Pulsed electron beam sources for material ablation." In International Conference on: Advanced Laser Technologies (ALT'01), edited by Dan C. Dumitras, Maria Dinescu, and Vitali I. Konov. SPIE, 2002. http://dx.doi.org/10.1117/12.478632.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Rosolen, Grahame C. "Combined optical and electron beam lithography for integrated circuit fabrication." In Microelectronic and MEMS Technologies, edited by Chris A. Mack and Tom Stevenson. SPIE, 2001. http://dx.doi.org/10.1117/12.425212.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhao, Min, Tang Xu, Baoqin Chen, and Jiebin Niu. "Technology of alignment mark in electron beam lithography." In 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), edited by Xiangang Luo and Harald Giessen. SPIE, 2014. http://dx.doi.org/10.1117/12.2068112.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Liu, Siyuan, Zhuangzhuang Qu, Yuanyuan Fan, Yan Qi, Lujun Bai, Weihu Zhou, Jianmin Lu, Yu Wang, and Chunrui Han. "Multiscale fabrication of integrated photonic chips by electron beam lithography." In Advanced and Extreme Micro-Nano Manufacturing Technologies, edited by Xuan-Ming Duan, Song Hu, Xiong Li, Mingbo Pu, Changtao Wang, and Xiangang Luo. SPIE, 2021. http://dx.doi.org/10.1117/12.2604003.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Heffernan, Ashleigh H., Daniel Stavrevski, Ivan Maksymov, Roman Kostecki, Heike Ebendorff-Heidepriem, Andrew Greentree, and Brant Gibson. "Focussed electron beam induced deposition of platinum plasmonic antennae." In Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI, edited by Georg von Freymann, Winston V. Schoenfeld, and Raymond C. Rumpf. SPIE, 2018. http://dx.doi.org/10.1117/12.2289380.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Stepanova, A. O., M. V. Korobeinikov, A. S. Yunoshev, and P. P. Laktionov. "Effect of electron-beam irradiation on electrospinning produced scaffolds." In 2015 International Conference on Biomedical Engineering and Computational Technologies (SIBIRCON). IEEE, 2015. http://dx.doi.org/10.1109/sibircon.2015.7361846.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Liang, Hongtao, Cunjun Ruan, and Qianzhong Xue. "Design of plane-distributed three-beam electron gun." In 2016 IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT). IEEE, 2016. http://dx.doi.org/10.1109/ucmmt.2016.7873949.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Electron-beam technologies" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії