Добірка наукової літератури з теми "Electrical circuits and systems"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Electrical circuits and systems".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Electrical circuits and systems"
Kaczorek, Tadeusz. "Singular fractional linear systems and electrical circuits." International Journal of Applied Mathematics and Computer Science 21, no. 2 (June 1, 2011): 379–84. http://dx.doi.org/10.2478/v10006-011-0028-8.
Повний текст джерелаMatveenko, Valerii, Maksim Iurlov, Dmitrii Oshmarin, Nataliya Sevodina, and Nataliia Iurlova. "Modelling of vibrational processes in systems with piezoelements and external electric circuits on the basis of their electrical analogue." Journal of Intelligent Material Systems and Structures 29, no. 16 (June 11, 2018): 3254–65. http://dx.doi.org/10.1177/1045389x18781025.
Повний текст джерелаKumar, Umesh. "A Retrospection of Chaotic Phenomena in Electrical Systems." Active and Passive Electronic Components 21, no. 1 (1998): 1–15. http://dx.doi.org/10.1155/1998/32462.
Повний текст джерелаModes, Christina, Melanie Bawohl, Jochen Langer, Jessica Reitz, Anja Eisert, Mark Challingsworth, Virginia Garcia, and Sarah Groman. "Thick Film Pastes for Power Applications." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2013, CICMT (September 1, 2013): 000155–61. http://dx.doi.org/10.4071/cicmt-wp24.
Повний текст джерелаWAH WU, CHAI, GUO-QUN ZHONG, and LEON O. CHUA. "SYNCHRONIZING NONAUTONOMOUS CHAOTIC SYSTEMS WITHOUT PHASE-LOCKING." Journal of Circuits, Systems and Computers 06, no. 03 (June 1996): 227–41. http://dx.doi.org/10.1142/s0218126696000182.
Повний текст джерелаPana, L. "Simulation of protection functions in LV shipboard electrical power systems." Scientific Bulletin of Naval Academy XXV, no. 1 (August 15, 2022): 8–15. http://dx.doi.org/10.21279/1454-864x-22-i1-001.
Повний текст джерелаFlatscher, Matthias, Markus Neumayer, Thomas Bretterklieber, and Hannes Wegleiter. "Transmission Lines in Capacitance Measurement Systems: An Investigation of Receiver Structures." Sensors 23, no. 3 (January 19, 2023): 1148. http://dx.doi.org/10.3390/s23031148.
Повний текст джерелаKaczorek, T. "Positive time-varying continuous-time linear systems and electrical circuits." Bulletin of the Polish Academy of Sciences Technical Sciences 63, no. 4 (December 1, 2015): 837–42. http://dx.doi.org/10.1515/bpasts-2015-0095.
Повний текст джерелаMroczkowski, Paweł, and Mirosław Neska. "Analysis Method for Finding the Sources of Failures in Circuits with a Frequency Converter." Solid State Phenomena 237 (August 2015): 124–29. http://dx.doi.org/10.4028/www.scientific.net/ssp.237.124.
Повний текст джерелаKarimov, R. "USING OPTOELECTRONIC NONCON TRONIC NONCONTACT VOLTAGE RELAY IN ELECTRICAL SUPPLY SYSTEMS." Technical science and innovation 2019, no. 2 (August 2, 2019): 241–48. http://dx.doi.org/10.51346/tstu-01.19.2.-77-0028.
Повний текст джерелаДисертації з теми "Electrical circuits and systems"
Smith, Nathan. "Substrate integrated waveguide circuits and systems." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=92388.
Повний текст джерелаCette thèse examine des interconnexions, des composantes et des systèmes basés sur des guides d'ondes intégrés au substrat (GIS). Les GIS sont des interconnexions de haute performance à large bande qui possèdent d'excellentes caractéristiques d'immunité contre les interférences électromagnétiques et qu'on pourrait utiliser dans des systèmes microondes et des circuits d'ondes millimétriques. Le coût des GIS est très faible comparativement à celui des guides d'ondes métalliques communs, car leur fabrication utilise des techniques peu coûteuses de production de cartes de circuits imprimés. Cette thèse étudie, au moyen de simulations à onde entière, le design de l'interconnexion et les modes supportés par le GIS. De plus, la thèse évalue les transitions des GIS ainsi que les méthodes de miniaturisation visant à diminuer l'empreinte du guide d'onde. Ensuite, la thèse expose le développement d'un répartiteur de puissance GIS Wilkinson qui possède d'excellentes propriétés isolantes allant jusqu'à 40dB entre les bornes de sortie. La thèse examine aussi une autre composante GIS: un résonateur à cavité GIS. La thèse décrit la conception d'un résonateur à cavité GIS qui est alimenté par une ligne microbande et une sonde passées par une aperture sur le mur supérieur de la cavité. L'aperture dans le mur supérieur crée une encoche plissée rayonnante, et des mesures ont révélé un gain de 7,76dB pour l'antenne adossée d'une cavité de 16,79 GHz. L'antenne possède une bande passante de 250MHz (perte de réflexion > 10dB). En plus de ce résonateur, un oscillateur micro-onde est conçu pour produire une tonalité de 10dBm. Les mesures de l'oscillateur fabriqué montrent un faible bruit de phase de -82dBc/Hz. Enfin, une nouvelle composante de GIS (un réflecteur effilé) est conçue pour compenser la caractéristique dispersive d'une interconnexion GIS près de la fréquence de coupure. Deux systèmes de correction de la disp
Tassoudji, Mohammad Ali. "Electromagnetic interference in electronic circuits and systems." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/35392.
Повний текст джерелаIncludes bibliographical references (p. 191-198).
by Mohammad Ali Tassoudji.
Ph.D.
Tavakoli, Dastjerdi Maziar 1976. "Analog VLSI circuits for inertial sensory systems." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/86766.
Повний текст джерелаIncludes bibliographical references (leaves 67-68).
by Maziar Tavakoli Dastjerdi.
S.M.
Macqueen, Christopher Neil. "Time based load-flow analysis and loss costing in electrical distribution systems." Thesis, Durham University, 1994. http://etheses.dur.ac.uk/1700/.
Повний текст джерелаEl-Damak, Dina Reda. "Power management circuits for ultra-low power systems." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99821.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 137-145).
Power management circuits perform a wide range of vital tasks for electronic systems including DC-DC conversion, energy harvesting, battery charging and protection as well as dynamic voltage scaling. The impact of the efficiency of the power management circuits is highly profound for ultra-low power systems such as implantable, ingestible or wearable devices. Typically the size of the system for such applications does not allow the integration of a large energy storage device. Therefore, extreme energy efficiency of the power management circuits is critical for extended operation time. In addition, flexibility and small form factor are desirable to conform to the human body and reduce the system's over all size. Thus, this thesis presents highly efficient and miniature power converters for multiple applications using architecture and circuit level optimization as well as emerging technologies. The first part presents a power management IC (PMIC) featuring an integrated reconfigurable switched capacitor DC-DC converter using on-chip ferroelectric caps in 130 nm CMOS process. Digital pulse frequency modulation and gain selection circuits allow for efficient output voltage regulation. The converter utilizes four gain settings (1, 2/3, 1/2, 1/3) to support an output voltage of 0.4 V to 1.1 V from 1.5 V input while delivering load current of 20 [mu]A to 1 mA. The PMIC occupies 0.366 mm² and achieves a peak efficiency of 93% including the control circuit overhead at a load current of 500 [mu]A. The second part presents a solar energy harvesting system with 3.2 nW overall quiescent power. The chip integrates self-startup, battery management, supplies 1 V regulated rail with a single inductor and supports power range of 10 nW to 1 [mu]W. The control circuit is designed in an asynchronous fashion that scales the effective switching frequency of the converter with the level of the power transferred. The ontime of the converter switches adapts dynamically to the input and output voltages for peak-current control and zero-current switching. The system has been implemented in 180 nm CMOS process. For input power of 500 nW, the proposed system achieves an efficiency of 82%, including the control circuit overhead, while charging a battery at 3 V from 0.5 V input. The third part focuses on developing an energy harvesting system for an ingestible device using gastric acid. An integrated switched capacitor DC-DC converter is designed to efficiently power sensors and RF transmitter with a 2.5 V regulated voltage rail. A reconfigurable Dickson topology with four gain settings (3, 4, 6, 10) is used to support a wide input voltage range from 0.3 V to 1.1 V. The converter is designed in 65 nm CMOS process and achieves a peak efficiency of 80% in simulation for output power of 2 [mu]W. The last part focuses on flexible circuit design using Molybdenum Disulfide (MoS₂), one of the emerging 2D materials. A computer-aided design flow is developed for MoS₂-based circuits supporting device modeling, circuit simulation and parametric cell-based layout - which paves the road for the realization of large-scale flexible MoS₂ systems.
by Dina Reda El-Damak.
Ph. D.
Mandal, Soumyajit 1979. "Far field RF power extraction circuits and systems." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28551.
Повний текст джерелаIncludes bibliographical references (p. 195-199).
In this thesis, I describe efficient methods for extracting DC power from electromagnetic radiation. This will become an important necessity for a number of applications involving remotely powered devices, such as Radio Frequency Identification (RFID) tags and bionic implants. I first investigate the problem abstractly, allowing theoretical bounds on system performance to be derived. Next I devise circuit, antenna and impedance matching network design strategies to efficiently approach these theoretical bounds. Finally, I use these strategies to create an experimental power extraction system that collects RF power at low electromagnetic field strengths. This system enables a substantial increase in the operating range of remotely powered devices.
by Soumyajit Mandal.
S.M.
Zhang, Zheng Ph D. Massachusetts Institute of Technology. "Uncertainty quantification for integrated circuits and microelectrornechanical systems." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99855.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 155-168).
Uncertainty quantification has become an important task and an emerging topic in many engineering fields. Uncertainties can be caused by many factors, including inaccurate component models, the stochastic nature of some design parameters, external environmental fluctuations (e.g., temperature variation), measurement noise, and so forth. In order to enable robust engineering design and optimal decision making, efficient stochastic solvers are highly desired to quantify the effects of uncertainties on the performance of complex engineering designs. Process variations have become increasingly important in the semiconductor industry due to the shrinking of micro- and nano-scale devices. Such uncertainties have led to remarkable performance variations at both circuit and system levels, and they cannot be ignored any more in the design of nano-scale integrated circuits and microelectromechanical systems (MEMS). In order to simulate the resulting stochastic behaviors, Monte Carlo techniques have been employed in SPICE-like simulators for decades, and they still remain the mainstream techniques in this community. Despite of their ease of implementation, Monte Carlo simulators are often too time-consuming due to the huge number of repeated simulations. This thesis reports the development of several stochastic spectral methods to accelerate the uncertainty quantification of integrated circuits and MEMS. Stochastic spectral methods have emerged as a promising alternative to Monte Carlo in many engineering applications, but their performance may degrade significantly as the parameter dimensionality increases. In this work, we develop several efficient stochastic simulation algorithms for various integrated circuits and MEMS designs, including problems with both low-dimensional and high-dimensional random parameters, as well as complex systems with hierarchical design structures. The first part of this thesis reports a novel stochastic-testing circuit/MEMS simulator as well as its advanced simulation engine for radio-frequency (RF) circuits. The proposed stochastic testing can be regarded as a hybrid variant of stochastic Galerkin and stochastic collocation: it is an intrusive simulator with decoupled computation and adaptive time stepping inside the solver. As a result, our simulator gains remarkable speedup over standard stochastic spectral methods and Monte Carlo in the DC, transient and AC simulation of various analog, digital and RF integrated circuits. An advanced uncertainty quantification algorithm for the periodic steady states (or limit cycles) of analog/RF circuits is further developed by combining stochastic testing and shooting Newton. Our simulator is verified by various integrated circuits, showing 10² x to 10³ x speedup over Monte Carlo when a similar level of accuracy is required. The second part of this thesis presents two approaches for hierarchical uncertainty quantification. In hierarchical uncertainty quantification, we propose to employ stochastic spectral methods at different design hierarchies to simulate efficiently complex systems. The key idea is to ignore the multiple random parameters inside each subsystem and to treat each subsystem as a single random parameter. The main difficulty is to recompute the basis functions and quadrature rules that are required for the high-level uncertainty quantification, since the density function of an obtained low-level surrogate model is generally unknown. In order to address this issue, the first proposed algorithm computes new basis functions and quadrature points in the low-level (and typically high-dimensional) parameter space. This approach is very accurate; however it may suffer from the curse of dimensionality. In order to handle high-dimensional problems, a sparse stochastic testing simulator based on analysis of variance (ANOVA) is developed to accelerate the low-level simulation. At the high-level, a fast algorithm based on tensor decompositions is proposed to compute the basis functions and Gauss quadrature points. Our algorithm is verified by some MEMS/IC co-design examples with both low-dimensional and high-dimensional (up to 184) random parameters, showing about 102 x speedup over the state-of-the-art techniques. The second proposed hierarchical uncertainty quantification technique instead constructs a density function for each subsystem by some monotonic interpolation schemes. This approach is capable of handling general low-level possibly non-smooth surrogate models, and it allows computing new basis functions and quadrature points in an analytical way. The computational techniques developed in this thesis are based on stochastic differential algebraic equations, but the results can also be applied to many other engineering problems (e.g., silicon photonics, heat transfer problems, fluid dynamics, electromagnetics and power systems). There exist lots of research opportunities in this direction. Important open problems include how to solve high-dimensional problems (by both deterministic and randomized algorithms), how to deal with discontinuous response surfaces, how to handle correlated non-Gaussian random variables, how to couple noise and random parameters in uncertainty quantification, how to deal with correlated and time-dependent subsystems in hierarchical uncertainty quantification, and so forth.
by Zheng Zhang.
Ph. D.
Groom, C. G. "Fuzzy logic and its application to dynamic security assessment of electrical power systems." Thesis, University of Bath, 1994. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239955.
Повний текст джерелаArfin, Scott K. (Scott Kenneth). "Low power circuits and systems for wireless neural stimulation." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/65999.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 155-161).
Electrical stimulation of tissues is an increasingly valuable tool for treating a variety of disorders, with applications including cardiac pacemakers, cochlear implants, visual prostheses, deep brain stimulators, spinal cord stimulators, and muscle stimulators. Brain implants for paralysis treatments are increasingly providing sensory feedback via neural stimulation. Within the field of neuroscience, the perturbation of neuronal circuits wirelessly in untethered, freely-behaving animals is of particular importance. In implantable systems, power consumption is often the limiting factor in determining battery or power coil size, cost, and level of tissue heating, with stimulation circuitry typically dominating the power budget of the entire implant. Thus, there is strong motivation to improve the energy efficiency of implantable electrical stimulators. In this thesis, I present two examples of low-power tissue stimulators. The first type is a wireless, low-power neural stimulation system for use in freely behaving animals. The system consists of an external transmitter and a miniature, implantable wireless receiver-and-stimulator utilizing a custom integrated chip built in a standard 0.5 ptm CMOS process. Low power design permits 12 days of continuous experimentation from a 5 mAh battery, extended by an automatic sleep mode that reduces standby power consumption by 2.5x. To test this device, bipolar stimulating electrodes were implanted into the songbird motor nucleus HVC of zebra finches. Single-neuron recordings revealed that wireless stimulation of HVC led to a strong increase of spiking activity in its downstream target, the robust nucleus of the arcopallium (RA). When this device was used to deliver biphasic pulses of current randomly during singing, singing activity was prematurely terminated in all birds tested. The second stimulator I present is a novel, energy-efficient electrode stimulator with feedback current regulation. This stimulator uses inductive storage and recycling of energy based on a dynamic power supply to drive an electrode in an adiabatic fashion such that energy consumption is minimized. Since there are no explicit current sources or current limiters, wasteful energy dissipation across such elements is naturally avoided. The stimulator also utilizes a shunt current-sensor to monitor and regulate the current through the electrode via feedback, thus enabling flexible and safe stimulation. The dynamic power supply allows efficient transfer of energy both to and from the electrode, and is based on a DC-DC converter topology that is used in a bidirectional fashion. In an exemplary electrode implementation, I show how the stimulator combines the efficiency of voltage control and the safety and accuracy of current control in a single low-power integrated-circuit built in a standard 0.35 pm CMOS process. I also perform a theoretical analysis of the energy efficiency that is in accord with experimental measurements. In its current proof-of-concept implementation, this stimulator achieves a 2x-3x reduction in energy consumption as compared to a conventional current-source-based stimulator operating from a fixed power supply.
by Scott Kenneth Arfin.
Ph.D.
Paidimarri, Arun. "Circuits and protocols for low duty cycle wireless systems." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/103674.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 191-200).
IoT devices are helping improve efficiency and expanding capabilities in an increasing number of applications including industrial, home and personal fitness. Device lifetimes are still a concern, and improved energy efficiency is needed. Additionally, aggressive duty cycling is needed to operate these IoT devices in severely energy-constrained applications. Wireless communication, which consumes a large fraction of the power in these devices, is the primary focus of this thesis. We present circuit (active RF, leakage management and timing) and protocol (medium access and coding) techniques for total power minimization in low duty cycle systems. First, we present a Bluetooth Low Energy (BLE) transmitter optimized for low duty cycles. It maintains a high efficiency >40% while delivering +10dBm. At the same time, aggressive power gating brings the leakage down to <400pW, giving an on/off power ratio of 7.6 x 10⁷. Second, we look at protocols for low duty cycle wireless communication. The tradeoffs between network capacity and sensor node power consumption are considered and a fully asynchronous protocol is proposed. Additionally, we look at two coding techniques, Digital Network Coding (DNC) and Spinal coding, to enhance the intrinsic range of communication. Finally, for systems requiring accurate clocks, the standard is to use crystal oscillators. However, in order to reduce cost and board area, we propose a fully-integrated RC oscillator architecture that achieves high stability while maintaining low power. Overall, the techniques explored in this thesis aim to expand operation of IoT devices to ever more energy constrained situations and with increased lifetimes.
by Arun Paidimarri.
Ph. D.
Книги з теми "Electrical circuits and systems"
Kaczorek, Tadeusz, and Krzysztof Rogowski. Fractional Linear Systems and Electrical Circuits. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11361-6.
Повний текст джерелаDíaz, Carlos H. Modeling of Electrical Overstress in Integrated Circuits. Boston, MA: Springer US, 1995.
Знайти повний текст джерелаSmith, Ralph Judson. Circuits, devices, and systems: A first course in electrical engineering. 5th ed. New York: Wiley, 1992.
Знайти повний текст джерелаSmith, Ralph J., and Ralph Judson Smith. Circuits, Devices, and Systems: And SPICE. 5th ed. New York: John Wiley & Sons Inc, 1995.
Знайти повний текст джерелаElectrical circuits and systems: An introduction for engineers and physical scientists. Oxford: Oxford University Press, 1996.
Знайти повний текст джерелаC, Dorf Richard, ed. Circuits, devices, and systems: A first course in electrical engineering. 5th ed. New York: John Wiley & Sons, 1992.
Знайти повний текст джерелаBigelow, Timothy A. Electric Circuits, Systems, and Motors. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-31355-5.
Повний текст джерелаSiebert, William McC. Circuits, signals, and systems. London: MIT Press, 1985.
Знайти повний текст джерелаCircuits, signals, and systems. Cambridge, Mass: MIT Press, 1986.
Знайти повний текст джерелаC, Toumazou, Battersby N. C, Porta Sonia, and IEEE International Symposium on Circuits and Systems (1994 : London, England), eds. Circuits and systems tutorials. New York: IEEE Press, 1996.
Знайти повний текст джерелаЧастини книг з теми "Electrical circuits and systems"
Scaddan, Brian. "Installation Circuits and Systems." In Electrical Installation Work, 179–206. 10th ed. London: Routledge, 2022. http://dx.doi.org/10.1201/9781003324324-15.
Повний текст джерелаBigelow, Timothy A. "Electrical Safety." In Electric Circuits, Systems, and Motors, 35–41. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-31355-5_2.
Повний текст джерелаKaczorek, Tadeusz, and Krzysztof Rogowski. "Positive Fractional Electrical Circuits." In Fractional Linear Systems and Electrical Circuits, 49–80. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11361-6_2.
Повний текст джерелаKrarti, Moncef. "Overview of Electrical Circuits." In Energy-Efficient Electrical Systems for Buildings, 19–50. Boca Raton: Taylor & Francis, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315372297-2.
Повний текст джерелаMorris, Noel M., and Frank W. Senior. "Polyphase Systems." In Electric Circuits, 266–93. London: Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-11232-6_12.
Повний текст джерелаKrarti, Moncef. "Branch Circuits and Feeders." In Energy-Efficient Electrical Systems for Buildings, 141–82. Boca Raton: Taylor & Francis, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315372297-6.
Повний текст джерелаKaczorek, Tadeusz, and Krzysztof Rogowski. "Minimum Energy Control of Electrical Circuits." In Fractional Linear Systems and Electrical Circuits, 197–208. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11361-6_7.
Повний текст джерелаDhiman, Rohit, and Rajeevan Chandel. "Design Challenges in Subthreshold Interconnect Circuits." In Energy Systems in Electrical Engineering, 7–24. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-2132-6_2.
Повний текст джерелаKaczorek, Tadeusz, and Krzysztof Rogowski. "Descriptor Linear Electrical Circuits and Their Properties." In Fractional Linear Systems and Electrical Circuits, 81–115. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11361-6_3.
Повний текст джерелаKaczorek, Tadeusz, and Krzysztof Rogowski. "Stability of Positive Standard Linear Electrical Circuits." In Fractional Linear Systems and Electrical Circuits, 117–29. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11361-6_4.
Повний текст джерелаТези доповідей конференцій з теми "Electrical circuits and systems"
Silva, Tarcísio M. P., Vagner Candido de Sousa, Marcel A. Clementino, and Carlos De Marqui. "Novel Equivalent Electrical Circuits for Linear and Nonlinear Electromechanically Coupled Systems." In ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3914.
Повний текст джерелаTzou, H. S., and J. H. Ding. "Equivalent Active Circuits of Distributed Control Systems." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1782.
Повний текст джерелаDorai, Arvind, Kumaraswamy Ponnambalam, and Arnold W. Heemink. "Yield optimization of electrical circuits." In 2009 3rd International Conference on Signals, Circuits and Systems (SCS 2009). IEEE, 2009. http://dx.doi.org/10.1109/icscs.2009.5412285.
Повний текст джерелаBarry, Noel. "The application of quaternions in electrical circuits." In 2016 27th Irish Signals and Systems Conference (ISSC). IEEE, 2016. http://dx.doi.org/10.1109/issc.2016.7528440.
Повний текст джерела"Circuits and systems." In 2011 8th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON 2011). IEEE, 2011. http://dx.doi.org/10.1109/ecticon.2011.5947754.
Повний текст джерелаBanerjee, Soumitro, Damian Giaouris, Otman Imrayed, Petros Missailidis, Bashar Zahawi, and Volker Pickert. "Nonsmooth dynamics of electrical systems." In 2011 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2011. http://dx.doi.org/10.1109/iscas.2011.5938164.
Повний текст джерелаFujishiro, Yoshikazu, Takahiko Yamamoto, and Kohji Koshiji. "Modal S-parameters and the circuit representation of symmetric circuits." In 2013 IEEE Electrical Design of Advanced Packaging and Systems Symposium (EDAPS). IEEE, 2013. http://dx.doi.org/10.1109/edaps.2013.6724404.
Повний текст джерелаRamasubramanian, Ramesh, D. Prabhu, and G. Karthikeyan. "Optimization techniques in electrical systems." In 2013 International Conference on Circuits, Power and Computing Technologies (ICCPCT). IEEE, 2013. http://dx.doi.org/10.1109/iccpct.2013.6528856.
Повний текст джерелаIEEE. "Components, Circuits, Devices & Systems." In 2022 Conference of Russian Young Researchers in Electrical and Electronic Engineering (ElConRus). IEEE, 2022. http://dx.doi.org/10.1109/elconrus54750.2022.9755763.
Повний текст джерелаSantana, Mike, and Alfredo V. Herrera. "Methodology to Correlate Defect Reduction Systems to Electrical Test Data via Artificially Manufactured Defects." In ISTFA 2002. ASM International, 2002. http://dx.doi.org/10.31399/asm.cp.istfa2002p0587.
Повний текст джерелаЗвіти організацій з теми "Electrical circuits and systems"
Weinschenk, Craig, Daniel Madrzykowski, and Paul Courtney. Impact of Flashover Fire Conditions on Exposed Energized Electrical Cords and Cables. UL Firefighter Safety Research Institute, October 2019. http://dx.doi.org/10.54206/102376/hdmn5904.
Повний текст джерелаShoemaker, Jordan. Damage Detection and Electrical Performance Impact of Flat-Flexible Circuits. Office of Scientific and Technical Information (OSTI), May 2022. http://dx.doi.org/10.2172/1870617.
Повний текст джерелаBernal Heredia, Willy, Dylan Cutler, and Jesse Dean. Case Study: Field Evaluation of a Low-Cost Circuit-Level Electrical Submetering System. Office of Scientific and Technical Information (OSTI), January 2021. http://dx.doi.org/10.2172/1762442.
Повний текст джерелаYu, Paul K., S. S. Lau, W. X. Chen, A. R. Clawson, and G. L. Li. Photonics Circuits Technology for RF Photonics Systems. Fort Belvoir, VA: Defense Technical Information Center, October 2000. http://dx.doi.org/10.21236/ada384486.
Повний текст джерелаA. Ilic, E. Baker, R. Hatcher, S. Ramakrishnan, and et al. NSTX Electrical Power Systems. Office of Scientific and Technical Information (OSTI), December 1999. http://dx.doi.org/10.2172/15127.
Повний текст джерелаCutler, Dylan, Willy Bernal Heredia, and Jesse Dean. Case Study: Laboratory and Field Evaluation of Circuit-Level Electrical Submetering with Integrated Metering System. Office of Scientific and Technical Information (OSTI), May 2019. http://dx.doi.org/10.2172/1810060.
Повний текст джерелаMuljadi, Eduard, Robert Nelms, Erol Chartan, Robi Robichaud, Lindsay George, and Henry Obermeyer. Electrical Systems of Pumped Storage Hydropower Plants: Electrical Generation, Machines, Power Electronics, and Power Systems. Office of Scientific and Technical Information (OSTI), June 2021. http://dx.doi.org/10.2172/1804447.
Повний текст джерелаRobertson, T. A., and S. J. Huval. Electrical power systems for distributed generation. Office of Scientific and Technical Information (OSTI), December 1996. http://dx.doi.org/10.2172/460175.
Повний текст джерелаKonkel, H. The Dynamic Balancer electrical safety systems. Office of Scientific and Technical Information (OSTI), December 1997. http://dx.doi.org/10.2172/677010.
Повний текст джерелаAkin, Meriem B., and Ana C. Arias. A Comprehensive Surface Mount Technology Solution for Integrated Circuits onto Flexible Screen Printed Electrical Interconnects. Fort Belvoir, VA: Defense Technical Information Center, May 2014. http://dx.doi.org/10.21236/ada602487.
Повний текст джерела