Добірка наукової літератури з теми "Electric Arc Plasma"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Electric Arc Plasma".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Electric Arc Plasma"
Ramakrishnan, S. "Technological Challenges in Thermal Plasma Production." Australian Journal of Physics 48, no. 3 (1995): 377. http://dx.doi.org/10.1071/ph950377.
Повний текст джерелаAnshakov, A. S., E. K. Urbakh, S. I. Radko, A. E. Urbakh, and V. A. Faleev. "Electric-arc steam plasma generator." Thermophysics and Aeromechanics 22, no. 1 (January 2015): 95–104. http://dx.doi.org/10.1134/s0869864314010096.
Повний текст джерелаKruchinin, A. M., M. Ya Pogrebissky, E. S. Ryazanova, and A. Yu Chursin. "Thermal characteristics of an arc column in the stabilization zone of an air-operated laminar plasma torch." Physics and Chemistry of Materials Treatment 6 (2020): 56–61. http://dx.doi.org/10.30791/0015-3214-2020-6-56-61.
Повний текст джерелаTazmeev, K. K., R. N. Tazmeeva, and B. K. Tazmeev. "Low-current arc in plasma flow from discharge with liquid electrolyte cathode." Journal of Physics: Conference Series 2270, no. 1 (May 1, 2022): 012028. http://dx.doi.org/10.1088/1742-6596/2270/1/012028.
Повний текст джерелаEt. al., Evseev Alexei Mikhailovich,. "Rectifilter for electric arc plasma plant." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 10, 2021): 3130–36. http://dx.doi.org/10.17762/turcomat.v12i2.2358.
Повний текст джерелаSawicki, Antoni. "Selected Properties of High-Frequency Electric Arc Initiators and Stabilisation Oscillators. Part 2. Devices with Compressed Electric Arc." Biuletyn Instytutu Spawalnictwa, no. 3 (June 2021): 49–60. http://dx.doi.org/10.17729/ebis.2021.3/5.
Повний текст джерелаTazmeev, K. K., and A. K. Tazmeev. "Features of a burning electric arc superimposed on gas discharge with liquid electrolyte cathode." Journal of Physics: Conference Series 2270, no. 1 (May 1, 2022): 012021. http://dx.doi.org/10.1088/1742-6596/2270/1/012021.
Повний текст джерелаVeklich, A., S. Fesenko, and V. Boretskij. "Plasma Peculiarities of Arc Discharge Between Carbon-Copper Electrodes." PLASMA PHYSICS AND TECHNOLOGY 6, no. 2 (2019): 152–55. http://dx.doi.org/10.14311/ppt.2019.2.152.
Повний текст джерелаKruchinin, A. M., M. Ya Pogrebisskiy, E. S. Ryazanova, and A. Yu Chursin. "Calculation of rational modes of plasma torches for plasma arc furnaces." Physics and Chemistry of Materials Treatment 2 (2022): 13–22. http://dx.doi.org/10.30791/0015-3214-2022-2-13-22.
Повний текст джерелаRutberg, Ph G., A. A. Safronov, S. D. Popov, A. V. Surov, and G. V. Nakonechnyi. "Multiphase electric-arc ac plasma generators for plasma technologies." High Temperature 44, no. 2 (March 2006): 199–205. http://dx.doi.org/10.1007/s10740-006-0024-0.
Повний текст джерелаДисертації з теми "Electric Arc Plasma"
Javidi, Shirvan Alireza. "Modelling of Electric Arc Welding : arc-electrode coupling." Licentiate thesis, Högskolan Väst, Avd för maskinteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-5826.
Повний текст джерелаAula, M. (Matti). "Optical emission from electric arc furnaces." Doctoral thesis, Oulun yliopisto, 2016. http://urn.fi/urn:isbn:9789526210926.
Повний текст джерелаTiivistelmä Valokaariuunien ohjaus on perinteisesti ollut uunioperaattorin käsissä. Valokaaariuuniprosessin on-line mittaukseen on olevassa vähän menetelmiä johtuen uunin hyvin haastavaista olosuhteista. Tässä työssä on tutkittu optiseen emissiospektroskopiaan perustuvaa menetelmää uuden jatkuva-aikaisen tiedon tuottamisessa valokaariuuniprosessista. Mittausjärjestelmä perustuu valon keräämiseen mitattavasta uunista valokuidun avulla, joka johtaa valon analysoitavaksi etäälle prosessista sijoitettuun spektrometriin. Mittauksia suoritettiin laboratorio-, pilot- ja tehdas-mittakaavassa. Valokaariuunin kuonan koostumuksen analysointia testattiin laboratorio- ja pilot-mittakaavan uuneilla. Laboratoriomittaukset osoittivat että kuonan komponenteista CrOx ja MnO ja vaikuttavat eniten mitattuun emissiospektriin. Pilot-mittakaavan kokeissa havaittiin, että kuonan Cr2O3-pitoisuutta voidaan mitata valokaaren emissiospektristä 0,62 %-yksikön keskimääräisellä absoluuttisella virheellä ja 0,49 %-yksikkön hajonnalla. Teollisella valokaariuunilla suoritetuista mittauksista havaittiin että optisen emissiospektrin mittaus voidaan suorittaa ilman ylitsepääsemättömiä teknisiä esteitä. Mittauksen tuloksia voidaan puolestaan käyttää kaasufaasin reaktioiden, romun sulamisen ja kuonapinnan ominaisuuksien arvioinnissa. Valokaaren emissiospektrin analyysi osoitti, että valokaaren plasman komponentit ovat pääosin peräisin kuonasta, joka mahdollistaa kuonan koostumuksen arvioinnin valokaaren emissiospektrin perusteella. Romun sulamisen mittausta voidaan prosessinohjauksessa käyttää jänniteportaiden ja toisen korin panostuksen optimointiin. Kuonan kromipitoisuuden mittaamista voidaan puolestaan käyttää pelkistinaineiden lisäyksen optimointiin ja kuonan jatkokäsittelyn valintaan
Lisnyak, Marina. "Theoretical, numerical and experimental study of DC and AC electric arcs." Thesis, Orléans, 2018. http://www.theses.fr/2018ORLE2013/document.
Повний текст джерелаThe ignition of an electric arc in the electric distribution system of an aircraft can be a serious problem for flight safety. The amount of information on this topic is limited, however. Therefore,the aim of this work is to investigate the electric arc behavior by means of experiment and numerical simulations.The MHD model of the LTE arc column was used and resolved numerically using the commercial software comsol Multiphysics. In order to describe plasma-electride interaction, the model had to be extended to include non-equilibrium effects near the electrodes. These zones were taken into account by means of current and energy conservation in the non-equilibrium layer. The correct matching conditions were developed and are described in the work. Validation of the model in the case of a free burning arc showed excellent agreement between comprehensive models and the experiment.This model was then extended to the case of the electric arc between rail electrodes in a 3D geometry. Due to electromagnetic forces the electric arc displaces along the electrodes. A self-consistent description of this phenomenon was established. The calculation was performed for DC, pulsed and AC current conditions at atmospheric and lower pressures. The main characteristics of the arc were analyzed and discussed. The results obtained were compared with the experimental measurements and showed good agreement.The model of electric arcs between busbar electrodes is able to predict the behavior of a fault arc in aeronautical conditions. Further improvements of the model are discussed as an outlook of the research
Coulombe, S. (Sylvain). "A model of the electric arc attachment on non-refractory (cold) cathodes /." Thesis, McGill University, 1997. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=34710.
Повний текст джерелаKrolak, Matthew Joseph. "Optimization of a magnetoplasmadynamic arc thruster." Link to electronic thesis, 2007. http://www.wpi.edu/Pubs/ETD/Available/etd-042607-155701/.
Повний текст джерелаSousa, martins Rafael Alexandre. "Etude expérimentale et théorique d'un arc de foudre et son interaction avec un matériau aéronautique." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLC080/document.
Повний текст джерелаNowadays, the study of the direct effects of lightning on aeronautical structures could be based, at least in part, on simulation tools. Nevertheless, the lack of experimental data on the transient phase of the lightning arc does not allow us to justify the predictive nature of the simulation tools. The objective of this thesis is to produce an experimental database based on the characterization of lightning arcs in standardized situations. These data can be used both for the understanding of the phenomena observed during the tests, but especially as a reference comparable to the simulation tools.First, we are interested in the free arc column in air, without interaction with the electrodes. Furthermore, time- and space-resolved profilesof temperature and pressure are evaluated by emission spectroscopy. For a 100 kA arc, it is shown that the temperature reaches 37400 K in the arc axis at 2 μs after arc ignition, with a corresponding pressure of 45 bar.Second, we are interested in the interaction of the lightning arc with aeronautical materials. The dynamics of the arc roots and the characteristics of the shock wave are analyzed for different aeronautical materials such as aluminum or carbon fiber composites. The thermo-mechanical constraints applied on the material are studied by infrared thermography and by rapid deflection measurements at the center of panel, leading to an evaluation of the pressure exercised by the arc at the attachment point
Hameurlaine, Kheira. "Contribution à l'étude d'un arc électrique de faible puissance." Phd thesis, Université d'Orléans, 2012. http://tel.archives-ouvertes.fr/tel-00821030.
Повний текст джерелаTrenty, Laurent. "Modélisation du chauffage de bains métalliques par un plasma d'arc transféré." Châtenay-Malabry, Ecole centrale de Paris, 1997. http://www.theses.fr/1997ECAP0510.
Повний текст джерелаFleury, Emmanuel. "Etude d'un plasma de méthane en atmosphère non oxydante." Rouen, 1988. http://www.theses.fr/1988ROUES004.
Повний текст джерелаLu, Jingjing. "Caractérisation du comportement du plasma dans un disjoncteur basse tension par le développement d'un outil numérique et d'expériences associées." Thesis, Toulouse 3, 2020. http://www.theses.fr/2020TOU30154.
Повний текст джерелаThe arc splitting process and the quantification of additional voltage drops are the major phenomena to understand and to optimize the Low Voltage Circuit Breaker (LVCB). The aim of our work is to understand their behavior through experiments and then their representation by our model. Therefore, a three-dimensional (3D) magnetohydrodynamic modeling is carried out on a simplified LVCB geometry. The developments are based on the commercial code Ansys @Fluent with UDF (User Define Functions). The plasma is described by fluid equations and a finite volume method. To study and isolate the mechanisms, the experimental and numerical work were realized on a simplified geometry, composed by two parallel electrodes with or without splitter plates. Numerically, the additional voltage resulting from the sheaths at the plasma/material interfaces, is considered by an approximate method based on the theoretical characteristic of voltage variation, as the function of current density. This additional resistivity allows to present the current flow in the materials and create some delay at the switching during the splitting process. Further to the experiments, the arc behavior is characterized by electrical measurements (Voltage, current) and by high-speed camera. The arc ignition is realized by a copper fuse of 0.1 mm. The geometry can be more or less closed at its both extremities in order to highlight the effects of pressure force and/or Lorentz force. The description of arc behavior was found similar between the simulation and experiments results. However, the initial conditions of our model proved to be preponderate while at the same time, the conditions remained delicate to determine
Книги з теми "Electric Arc Plasma"
Aubrecht, V. Spectral and equidensitometry diagnostics of electric arc plasma. Tomsk: Tomsk Polytechnical Univ., 1999.
Знайти повний текст джерелаKrouchinin, Anatoli M. Modelling of the constricted arc in plasma generators. Częstochowa: Publishing Office of Czestochowa University of Technology, 2005.
Знайти повний текст джерелаAubrecht, V. Radiative transport of energy in SF₆ arc plasma. Tomsk: [s.n], 2000.
Знайти повний текст джерелаZhukov, M. F., and I. M. Zasypkin. Ėlektrodugovye generatory termicheskoĭ plazmy. Novosibirsk: "Nauka", 1999.
Знайти повний текст джерелаMontgomery, R. W. The use of plasma torches for auxiliary heating in an electric arc furnace. Luxembourg: Commission of the European Communities, 1985.
Знайти повний текст джерелаM, Oks E., and Brown Ian G, eds. Emerging applications of vacuum-arc-produced plasma, ion, and electron beams. Dordrecht: Kluwer Academic Publishers, 2003.
Знайти повний текст джерелаInternational Power Beam Conference (1988 San Diego, Calif.). Power beam processing: Electron, laser, plasma-arc : proceedings of the International Power Beam Conference, 2-4 May 1988, San Diego, California, USA. [Metals Park, Ohio]: ASM International, 1988.
Знайти повний текст джерелаCyclic plasticity and low cycle fatigue life of metals. Amsterdam: Elsevier, 1991.
Знайти повний текст джерелаNCCER. 29103-09 Plasma Arc Cutting. Pearson Education, Limited, 2014.
Знайти повний текст джерелаNCCER. 29205-03 Plasma Arc Cutting (PAC) IG. Pearson Education, Limited, 2003.
Знайти повний текст джерелаЧастини книг з теми "Electric Arc Plasma"
Younian, Wang, and Ma Tengcai. "Investigation of Electric Conductivity of Plasma in Magnetic Rotating Arc." In Plasma Jets in the Development of New Materials Technology, 27–32. London: CRC Press, 2023. http://dx.doi.org/10.1201/9780429070938-4.
Повний текст джерелаYasko, O. I., L. I. Sharakhovsky, and L. P. Podenok. "Heat Treatment of a Surface with a Vortex – Stabilized Electric ARC." In Plasma Jets in the Development of New Materials Technology, 539–41. London: CRC Press, 2023. http://dx.doi.org/10.1201/9780429070938-51.
Повний текст джерелаDong, Qipeng, and Jiongming Zhang. "Simulation of Fluid Flow and Heat Transfer in Plasma ARC Region of AC Electric ARC Furnace." In CFD Modeling and Simulation in Materials Processing 2016, 35–42. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274681.ch5.
Повний текст джерелаDong, Qipeng, and Jiongming Zhang. "Simulation of Fluid Flow and Heat Transfer in Plasma Arc Region of AC Electric Arc Furnace." In The Minerals, Metals & Materials Series, 35–42. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-65133-0_5.
Повний текст джерелаWescott, E. M. "The Electric Field Structure of Auroral Arcs as Determined from Barium Plasma Injection Experiments." In Physics of Auroral Arc Formation, 175–84. Washington, D. C.: American Geophysical Union, 2013. http://dx.doi.org/10.1029/gm025p0175.
Повний текст джерелаJainakov, A., J. O. Usenkanov, T. R. Dzhumaliev, and S. Kydyraliev. "Study of Electric Arc Plasma Flow in Transition Region from Laminar to Turbulent Current." In Plasma Jets in the Development of New Materials Technology, 17–25. London: CRC Press, 2023. http://dx.doi.org/10.1201/9780429070938-3.
Повний текст джерелаDesyatkov, G. A., V. S. Engelsht, V. Ts Gurovich, N. U. Musin, G. M. Okopnik, A. N. Saichenko, and V. L. Spektorov. "High-Voltage Electric Arc as the Source for Ignition of Air-Dispersed Fuel Flows." In Plasma Jets in the Development of New Materials Technology, 499–509. London: CRC Press, 2023. http://dx.doi.org/10.1201/9780429070938-47.
Повний текст джерелаBeilis, Isak. "Vacuum Arc Ignition. Electrical Breakdown." In Plasma and Spot Phenomena in Electrical Arcs, 143–64. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44747-2_6.
Повний текст джерелаBeilis, Isak. "Vacuum Arc Plasma Sources. Thin Film Deposition." In Plasma and Spot Phenomena in Electrical Arcs, 933–1001. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44747-2_22.
Повний текст джерелаGalonska, M., F. Heymach, R. Hollinger, and P. Spädtke. "Vacuum Arc Ion Sources: Charge State Enhancement and Arc Voltage." In Emerging Applications of Vacuum-Arc-Produced Plasma, Ion and Electron Beams, 123–30. Dordrecht: Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0277-6_12.
Повний текст джерелаТези доповідей конференцій з теми "Electric Arc Plasma"
Karpov, Dmitriy A., and S. N. Nazikov. "Multicomponent electric-arc source of metallic plasma." In Shanghai - DL tentative, edited by Shixun Zhou and Yongling Wang. SPIE, 1991. http://dx.doi.org/10.1117/12.47293.
Повний текст джерелаSHEPARD, CHARLES, FRANK MILOS, and JASWINDER TAUNK. "A sonic flow equation for electric arc jets." In 24th Plasma Dynamics, and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1993. http://dx.doi.org/10.2514/6.1993-3183.
Повний текст джерелаRoychoudhury, Subhasish. "Simulation of plasma-dynamic processes in electric arc." In 38th Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2000. http://dx.doi.org/10.2514/6.2000-1070.
Повний текст джерелаRaniszewski, G., Z. Kolacinski, and L. Szymanski. "Influence of mineral components on electric arc plasma parameters." In 2009 IEEE 36th International Conference on Plasma Science (ICOPS). IEEE, 2009. http://dx.doi.org/10.1109/plasma.2009.5227623.
Повний текст джерелаMeshcheryakov, V. N., V. V. Pikalov, A. M. Evseev, O. V. Danilova, and S. K. Ambrosimov. "Electric Arc Plasma Installation with Control Information-Measuring System." In 2019 1st International Conference on Control Systems, Mathematical Modelling, Automation and Energy Efficiency (SUMMA). IEEE, 2019. http://dx.doi.org/10.1109/summa48161.2019.8947588.
Повний текст джерелаBussiere, William, David Rochette, Pascal Andre, Gerard Velleaud, and Steeve Memiaghe. "Study of the SIO2 plasma radiation. application to the fuse arc plasma." In 2007 8th International Conference on Electric Fuses and their Applications. IEEE, 2007. http://dx.doi.org/10.1109/icefa.2007.4419975.
Повний текст джерелаAn, L. T., and Y. Gao. "Electric Characteristics of Plasma Arc Produced by Bi-Anode Torch." In ITSC2009, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2009. http://dx.doi.org/10.31399/asm.cp.itsc2009p1122.
Повний текст джерелаDeblauw, Bradley, Eli Lazar, Nachiket Kale, Nick Glumac, Craig Dutton, and Greg Elliott. "Flow and Thermal Properties Induced by Electric Arc Plasma Actuators." In 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-734.
Повний текст джерелаBurkat, D., F. Aristizabal, and S. Coulombe. "High-speed imaging and electrical diagnostics of interacting arcs in dual-cathode electric arc furnace." In 2016 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2016. http://dx.doi.org/10.1109/plasma.2016.7534013.
Повний текст джерелаPeng Sun and Ruxv Xie. "Numerical simulation of large-current vacuum arc plasma." In 2011 1st International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2011. http://dx.doi.org/10.1109/icepe-st.2011.6123043.
Повний текст джерелаЗвіти організацій з теми "Electric Arc Plasma"
Yermiyahu, Uri, Thomas Kinraide, and Uri Mingelgrin. Role of Binding to the Root Surface and Electrostatic Attraction in the Uptake of Heavy Metal by Plants. United States Department of Agriculture, 2000. http://dx.doi.org/10.32747/2000.7586482.bard.
Повний текст джерелаElbaum, Michael, and Peter J. Christie. Type IV Secretion System of Agrobacterium tumefaciens: Components and Structures. United States Department of Agriculture, March 2013. http://dx.doi.org/10.32747/2013.7699848.bard.
Повний текст джерелаVan Rijn, Jaap, Harold Schreier, and Yossi Tal. Anaerobic ammonia oxidation as a novel approach for water treatment in marine and freshwater aquaculture recirculating systems. United States Department of Agriculture, December 2006. http://dx.doi.org/10.32747/2006.7696511.bard.
Повний текст джерелаOhad, Itzhak, and Himadri Pakrasi. Role of Cytochrome B559 in Photoinhibition. United States Department of Agriculture, December 1995. http://dx.doi.org/10.32747/1995.7613031.bard.
Повний текст джерела