Добірка наукової літератури з теми "Dynamic Life Cycle Assessments"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Dynamic Life Cycle Assessments".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Dynamic Life Cycle Assessments"
Bixler, Taler S., James Houle, Thomas Ballestero, and Weiwei Mo. "A dynamic life cycle assessment of green infrastructures." Science of The Total Environment 692 (November 2019): 1146–54. http://dx.doi.org/10.1016/j.scitotenv.2019.07.345.
Повний текст джерелаJayathissa, P., M. Jansen, N. Heeren, Z. Nagy, and A. Schlueter. "Life cycle assessment of dynamic building integrated photovoltaics." Solar Energy Materials and Solar Cells 156 (November 2016): 75–82. http://dx.doi.org/10.1016/j.solmat.2016.04.017.
Повний текст джерелаSohn, Joshua, Pradip Kalbar, Benjamin Goldstein, and Morten Birkved. "Defining Temporally Dynamic Life Cycle Assessment: A Review." Integrated Environmental Assessment and Management 16, no. 3 (January 30, 2020): 314–23. http://dx.doi.org/10.1002/ieam.4235.
Повний текст джерелаSu, Shu, Jingyi Ju, Yujie Ding, Jingfeng Yuan, and Peng Cui. "A Comprehensive Dynamic Life Cycle Assessment Model: Considering Temporally and Spatially Dependent Variations." International Journal of Environmental Research and Public Health 19, no. 21 (October 27, 2022): 14000. http://dx.doi.org/10.3390/ijerph192114000.
Повний текст джерелаDyckhoff, Harald, and Tarek Kasah. "Time Horizon and Dominance in Dynamic Life Cycle Assessment." Journal of Industrial Ecology 18, no. 6 (April 10, 2014): 799–808. http://dx.doi.org/10.1111/jiec.12131.
Повний текст джерелаCichowicz, Jakub, Gerasimos Theotokatos, and Dracos Vassalos. "Dynamic energy modelling for ship life-cycle performance assessment." Ocean Engineering 110 (December 2015): 49–61. http://dx.doi.org/10.1016/j.oceaneng.2015.05.041.
Повний текст джерелаAsdrubali, F., P. Baggio, A. Prada, G. Grazieschi, and C. Guattari. "Dynamic life cycle assessment modelling of a NZEB building." Energy 191 (January 2020): 116489. http://dx.doi.org/10.1016/j.energy.2019.116489.
Повний текст джерелаPehnt, Martin. "Dynamic life cycle assessment (LCA) of renewable energy technologies." Renewable Energy 31, no. 1 (January 2006): 55–71. http://dx.doi.org/10.1016/j.renene.2005.03.002.
Повний текст джерелаWhite, Robin R. "198 Beef cattle support system modeling." Journal of Animal Science 98, Supplement_2 (November 1, 2020): 68–69. http://dx.doi.org/10.1093/jas/skz397.160.
Повний текст джерелаSu, Shu, Huan Zhang, Jian Zuo, Xiaodong Li, and Jingfeng Yuan. "Assessment models and dynamic variables for dynamic life cycle assessment of buildings: a review." Environmental Science and Pollution Research 28, no. 21 (March 30, 2021): 26199–214. http://dx.doi.org/10.1007/s11356-021-13614-1.
Повний текст джерелаДисертації з теми "Dynamic Life Cycle Assessments"
Shimako, Allan. "Contribution to the development of a dynamic Life Cycle Assessment method." Thesis, Toulouse, INSA, 2017. http://www.theses.fr/2017ISAT0014/document.
Повний текст джерелаLife Cycle Assessment (LCA) is a widely used method for the environmental evaluation of an anthropogenic system. However, LCA scholars pointed out the lack of a temporal dimension as a limitation. The processes of technosphere are dynamic which leads to a time dependent life cycle inventory (LCI). Environmental mechanisms involved in impact developments have distinct dynamic behaviors determining specific temporal occurrence. However, the current life cycle impact assessment (LCIA) methods consider arbitrarily fixed time horizons and/or steady state conditions. The objective of this thesis is to contribute to the development of an operational methodology and adapted tools for the consideration of time dependency in LCA, with emphasis on the development of an integrated modelling solution for both the life cycle inventory and the life cycle impact assessment phases. The first contribution of this thesis concerns the development of a temporal data base, leaning against ecoinvent data base, in which temporal parameters have been attributed to the data sets. Dynamic climate change and toxicity impacts were developed by adapting available models and were implemented in a homemade computational tool. The modelling approach takes into account the noisy nature of substance emissions in function of time as calculated by DyPLCA temporal LCI model
Collinge, William O. "A dynamic life cycle assessment framework for whole buildings including indoor environmental quality impacts." Thesis, University of Pittsburgh, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=3573266.
Повний текст джерелаLife cycle assessment (LCA) can aid in quantifying the environmental impacts of whole buildings by evaluating materials, construction, operation and end of life phases with the goal of identifying areas of potential improvement. Since buildings have long useful lifetimes, and the use phase can have large environmental impacts, variations within the use phase can sometimes be greater than the total impacts of other phases. Additionally, buildings are operated within changing industrial and environmental systems; the simultaneous evaluation of these dynamic systems is recognized as a need in LCA. At the whole building level, LCA of buildings has also failed to account for internal impacts due to indoor environmental quality (IEQ). The two key contributions of this work are 1) the development of an explicit framework for DLCA and 2) the inclusion of IEQ impacts related to both occupant health and productivity. DLCA was defined as “an approach to LCA which explicitly incorporates dynamic process modeling in the context of temporal and spatial variations in the surrounding industrial and environmental systems.” IEQ impacts were separated into three types: 1) chemical impacts, 2) nonchemical health impacts, and 3) productivity impacts. Dynamic feedback loops were incorporated in a combined energy/IEQ model, which was applied to an illustrative case study of the Mascaro Center for Sustainable Innovation (MCSI) building at the University of Pittsburgh. Data were collected by a system of energy, temperature, airflow and air quality sensors, and supplemented with a postoccupancy building survey to elicit occupants’ qualitative evaluation of IEQ and its impact on productivity. The IEQ+DLCA model was used to evaluate the tradeoffs or co-benefits of energy-savings scenarios. Accounting for dynamic variation changed the overall results in several LCIA categories—increasing nonrenewable energy use by 15% but reducing impacts due to criteria air pollutants by over 50%. Internal respiratory effects due to particulate matter were up to 10% of external impacts, and internal cancer impacts from VOC inhalation were several times to almost an order of magnitude greater than external cancer impacts. An analysis of potential energy saving scenarios highlighted tradeoffs between internal and external impacts, with some energy savings coming at a cost of negative impacts on either internal health, productivity or both. Findings support including both internal and external impacts in green building standards, and demonstrate an improved quantitative LCA method for the comparative evaluation of building designs.
Negishi, Koji. "Development of a methodology of Dynamic LCA applied to the buildings." Thesis, Toulouse, INSA, 2019. http://www.theses.fr/2019ISAT0013/document.
Повний текст джерелаThe building sector is a key actor to meet the reduction targets in terms of energy consumption and greenhouse gases (GHG) emissions. Life Cycle Assessment (LCA) is the most used method for assessing the environmental impacts of a system. In the building sector, the LCA method was adapted with appropriate and simplified tools in order to encourage stakeholders to evaluate the environmental performance of their building products. However, LCA method has some limitations, one of which being the lack of “time dimension” that particularly concerns three points: (i) Lack of consideration of temporal evolution of the system under LCA study, “building system” in our case, (ii) Lack of consideration of temporal discrepancy of activities and associated emissions, (iii) Lack of consideration of dynamic characteristics of environmental impacts (stationary conditions, fixed time horizon, etc.). In this context, the primary objective of the thesis is to develop a dynamic LCA methodology applied to the building sector, on the basis of DyPLCA ANR project. The application of the new dynamic method to a case study with three attached single houses demonstrated that dynamic LCA provides important information on the temporal profile of impacts. The same amount of GHG emissions has a lower effect on temperature peaks when emissions are spread over a long period. The distinction is made between the various GHG, especially according to their lifetime. Instantaneous and cumulated effects (indicators) should be considered in a complete analysis. Actions for mitigation and adaptation need to be decided according to different types of construction product families. Besides, it is necessary to adapt the impact reduction efforts according to the chemical substances
Ahmadi, Achachlouei Mohammad. "Exploring the Effects of ICT on Environmental Sustainability: From Life Cycle Assessment to Complex Systems Modeling." Doctoral thesis, KTH, Miljöstrategisk analys (fms), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171443.
Повний текст джерелаDen ökande produktionen och konsumtionen av produkter och tjänster inom informations- och kommunikationsteknik (IKT) leder till en ökning av den globala elanvändningen samt direkta miljökonsekvenser kopplade till IKT. Men IKT har även indirekta miljömässiga effekter. Dessa kan vara positiva till exempel genom substitutions- och optimeringseffekter eller negativa genom att till exempel ge upphov till ytterligare efterfrågan på grund av effektivisering (så kallade reboundeffekter). Olika metoder kan användas för att modellera och bedöma både direkta och indirekta effekter av IKT. Syftet med denna avhandling är att undersöka metoder för modellering samt att studera miljöeffekter av IKT och elektronisk media med hjälp av livscykelanalys (LCA) och även modellering av komplexa och dynamiska system, samt simuleringsteknik, så som System Dynamics (SD) och agentbaserad (AB) modellering. Avhandlingen omfattar fem artiklar (artikel I-V). Artikel I & II beskriver resultaten från en fallstudie där miljöeffekter kopplade till en svensk tidskrift studeras med LCA. Tidskriftens version för surfplatta samt motsvarande tryckta version studeras och jämförs. Artikel III går ett steg vidare från produktnivåns LCA. Artikeln återkopplar till en SD simuleringsstudie som ursprungligen genomfördes under 2002. Simuleringsstudien gällde framtida miljöeffekter av IKT i 15 europeiska länder med tidspespektivet 2000-2020. I artikeln valideras tre scenarier från simuleringsstudien med hjälp av nya empiriska data från 2000-2012 och ett nytt scenario modelleras. Kvantitativa och kvalitativa resultat från den ursprungliga studien diskuteras. Till exempel visar artikel III att IKT har en stimulerande effekt på den totala persontrafiken genom att göra den mer kostnads- och tidseffektiv (reboundeffekt). Modelleringsmekanismen som används för att representera denna reboundeffekt diskuteras vidare i artikel IV. Artikeln belyser och diskuterar den återkopplingsslinga (feedback-loop) som används för att modellera två typer av reboundeffekter kopplade till persontrafik (direkt ekonomisk rebound och tidsrelaterad rebound) samt jämför med en tidigare studie. Artikel IV behandlar också den roll systemtänkande och modellering kan spela i konceptualisering och kommunikation av reboundeffekters dynamik. För att ytterligare undersöka systemmodelleringens och simuleringens möjligheter att representera icke-linjära komplexa och dynamiska system (exempel på sådana diskuteras i artikel III och IV), sammanställer artikel V tidigare studier som jämför SD och AB-metoder och -modeller. Studiernas mål och metod summeras och resultaten med avseende på vilka kriterier som presenteras för att välja mellan SD och AB sammanställs. Även processen för att omvandla en befintlig SD-modell till en AB-modell beskrivs. Avhandlingens slutsats är att LCA och systemmodelleringsmetoder kan vara användbara för att studera IKTs direkta effekter så väl som indirekta effekter på miljön.
QC 20150813
Pettersen, Johan. "Potentially affected fraction of species from dynamic marine exposure : Life cycle impact assessment of marine ecotoxic impacts from offshore discontinuous discharges." Thesis, Norwegian University of Science and Technology, Industrial Ecology Programme, 2004. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1420.
Повний текст джерелаFor any substance that is used and discharged offshore the contractor has to choose the best alternative in relation to the effects of the substance upon discharge. Any environmental impact that the choice might have in other localities related to either processes before the product is used (e.g. raw material extraction and refining), or in the following treatment of byproducts (offshore or on shore) are neglected. Basing the selection of products solely on the potential marine toxicological impact of the substances will systematically prioritize small local improvements to greater improvement potentials in production or internal and external recycling.
Life cycle impact assessment (LCA) is a tool developed for environmental evaluation of entire product systems; that is all processes for from raw material production to the end-of-life treatment of the product. Material input and output streams to the processes are converted to environmental impacts in the life cycle impact assessment (LCIA) stage of LCA. Characterization factors are used to quantify the impact within impact groups.
Eco-indicator 99 and the CLM problem oriented approach (CML-POA) are two LCIA methods that include characterization factors for eco-toxic impacts. Both methods use adapted versions of the EUSES/SimpleBox model to simulate the fate of substances, but the methods do not apply the same definition of eco-toxic damage to quantify the relative impact of different substances. Eco-indicator 99 uses the Potentially affected fraction of species (PAF), while CML-POA uses the Risk Characterization Ratio. EUSES/SimpleBox is a multi media steady-state fate model, and concentrations in different environmental media are calculated from annual continuous emissions.
Offshore discharges are distributed in time and space. The resulting concentrations are high compared to the concentration in the total marine volume, and the affected volume is limited. Given the discontinuous properties of exposure from offshore discharges the EUSES/SimpleBox model is not suited to model such emissions.
A method to calculate characterization factors for discontinuous offshore discharges is proposed in this study. The method is based on the PAF as defined in the Eco-indicator 99 method. Changes from the Eco-indicator 99 method are:
• Replacement of the static hazard unit increase with a time integrated function to better describe the time dependant exposure from offshore discharges.
• Replacement of the static total marine volume with the time integrated volume.
The resulting dynamic marine exposure PAF (dme-PAF) is compatible with the ecotoxicity characterization factors in Eco-indicator 99. It is proposed to omit the acute period in the time integrals and only assess the chronic exposure period beginning from day four.
The Dose-related risk and effect assessment model (DREAM) is used to simulate the time variation of offshore discharges. DREAM is used today by Statoil in environmental risk assessments of such discharges. The model is not a multi-media fate model although it includes most of the processes that are part of the EUSES/SimpleBox model. DREAM produces time dependant profiles of discharges. These are used to calculate the time integrals in the dme-PAF method.
Simulations were performed to calculate ecotoxicity characterization factors for glutaraldehyde with the dme-PAF method. The simulations performed show that one of the settings in DREAM will have great influence on the resulting characterization factors, namely the lower concentration limit (LCL). DREAM calculates concentration in cells, and this data is stored and can be extracted in text format. Cells with concentrations below LCL will not be stored and the volume of these cells will be neglected. In order to be able to calculate dme-PAF properly LCL should be set at zero. This will maximize the number of recorded cells. Given the limitations of MS Office Excel other software must be sought to accommodate calculation of dme-PAF.
Dme-PAF will be affected by changes of the mass, concentration or period of the discharge. Ecotoxicity factors therefore should be calculated for different scenarios regarding the location, concentration, mass and period of the discharge.
Bisinella, de faria Ana barbara. "Development of an integrated approach for wastewater treatment plant optimization based on dynamic modelling and environmental assessment." Thesis, Toulouse, INSA, 2016. http://www.theses.fr/2016ISAT0039/document.
Повний текст джерелаWastewater treatment plants are moving towards energy and nutrients recovery facilities. Simultaneously, they are submitted to stricter regulation with respect to environment and human health. Facing the great challenge of reducing operational costs along with the reduction of environmental impacts and the guaranty of plants robustness, tools might be developed in order to provide an integrated assessment. The goal of this work is to develop a reliable and predictive framework containing rigorous dynamic wide-plant modelling, extended boundaries life cycle assessment for scenarios evaluation and an efficient multi-objective optimization tool. The developed framework for environmental evaluation coupled to dynamic modelling was initially applied to several case studies including urine source separation, enhanced primary clarification and urine treatment by nitritation/ anaerobic ammonium oxidation, offering both performance results and environmental hotspots. Given the important benefits of the urine source separation provided by the previous results, a flexible and dynamic phenomenological influent generator was adapted in order to provide realistic dynamic data concerning urine and wastewater streams in different urine retention scenarios. Finally, as the complex combination of biological, chemical and physical processes leads to a computational expensive problem, a feasibility study (computational time and reliability) on the multi-objective optimization was conducted. Obtaining a set of solutions that avoids any prior discrimination among costs, environment and performance allowed thus the discussion of the involved trade-offs. Finally, the complete framework was applied to several case studies lightening on operational aspects of more sustainable options on wastewater management and treatment
Purushotham, Vineeth. "Dynamic Life Cycle Costing." Thesis, KTH, Industriell produktion, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-102785.
Повний текст джерелаLaratte, Bertrand. "Evaluation dynamique et cumulative des impacts environnementaux dans le cadre d'une analyse de cycle de vie." Thesis, Troyes, 2013. http://www.theses.fr/2013TROY0033/document.
Повний текст джерелаEnvironmental impact assessment methods are now widely used in order to measure environmental impacts associated with human activities (for products, services, and systems). Life-cycle assessment (LCA) is without doubt the foremost assessment method. LCA is also often thought of as the more advanced one, despite serious limitations (e.g. LCA does not include properly economical or social dimensions). In this PhD report, I explore more specifically the issue of integrating time in both inventory models and impact assessments along the life-cycle. In the case of climate change, I offer an evolution of traditional LCA towards a framework that includes dynamic and cumulative aspects as expressed directly in CO2-equivalent. This approach, which is oriented towards reporting practices and/or public policies, is afterwards applied to three different case studies of growing complexity. The central hypothesis of this work is that switching from traditional to so-called “dynamic” LCA would allow for better results with regards to one reality of environmental processes
Emblemsvåg, Jan. "Activity-based life-cycle assessments in design and management." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/32855.
Повний текст джерелаDemou, Evangelia. "Nanoparticles and solvents : exposure, risk and life-cycle-assessments in occupational settings /." [S.l.] : [s.n.], 2009. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=18189.
Повний текст джерелаКниги з теми "Dynamic Life Cycle Assessments"
1956-, Gonzales Daniel, United States Air Force, and Project Air Force (U.S.), eds. Life cycle cost assessments for military transatmospheric vehicles. Santa Monica, CA: RAND, 1997.
Знайти повний текст джерелаAndrae, A. S. G. Global Life Cycle Impact Assessments of Material Shifts. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-661-8.
Повний текст джерелаBrankatschk, Gerhard. Modeling Crop Rotations and Co-Products in Agricultural Life Cycle Assessments. Wiesbaden: Springer Fachmedien Wiesbaden, 2019. http://dx.doi.org/10.1007/978-3-658-23588-8.
Повний текст джерелаJane, Falkingham, and Hills John 1954-, eds. The dynamic of welfare: The welfare state and the life cycle. New York: Prentice Hall/Harvester Wheatsheaf, 1995.
Знайти повний текст джерелаHarding, R. R. The multi-disciplinary design study: A life cycle cost algorithm. Hampton, Va: Langley Research Center, 1988.
Знайти повний текст джерелаGlobal life cycle impact assessments of material shifts: The example of a lead-free electronics industry. London: Springer, 2010.
Знайти повний текст джерелаGreenstein, Shane M. Dynamic modeling of the product life cycle in the commercial mainframe computer market, 1968-1982. Cambridge, MA: National Bureau of Economic Research, 1997.
Знайти повний текст джерелаL, Robertson Paul, and NetLibrary Inc, eds. Firms, markets, and economic change: A dynamic theory of business institutions. London: Routledge, 2002.
Знайти повний текст джерелаCameron, Stephen V. Life cycle schooling and dynamic selection bias: Models and evidence for five cohorts of American males. Cambridge, MA: National Bureau of Economic Research, 1998.
Знайти повний текст джерелаLanglois, Richard N. Firms, markets and economic change: Dynamic theory of business institutions. London: Routledge, 1995.
Знайти повний текст джерелаЧастини книг з теми "Dynamic Life Cycle Assessments"
Boyd, Sarah B. "Life-Cycle Assessment of Dynamic Random Access Memory." In Life-Cycle Assessment of Semiconductors, 97–107. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9988-7_7.
Повний текст джерелаJaeger, Florian Ansgar, Cornelia Sonntag, Jörn Hartung, and Katrin Müller. "Dynamic and Localized LCA Information Supports the Transition of Complex Systems to a More Sustainable Manner Such as Energy and Transport Systems." In Towards a Sustainable Future - Life Cycle Management, 61–72. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77127-0_6.
Повний текст джерелаDakhili, K., T. Kebig, M. Schäfer, S. Maas, M. Bender, and A. Zürbes. "Bridge damage assessment based on static and dynamic flexibility matrices." In Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability, 316–23. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003322641-35.
Повний текст джерелаBayat, E., and F. Tubino. "Dynamic characterization and vibration serviceability assessment of a historic suspension footbridge." In Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability, 665–73. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003322641-80.
Повний текст джерелаFu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Life Cycle Assessments." In Perovskite Solar Cells, 285–96. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-22.
Повний текст джерелаWang, Na, Dan Chong, and Xiang Fei. "Comparing Global Warming Impact of Asphalt Pavement Preservation at Maintenance and Use Stages Using Dynamic Life-Cycle Assessment." In Lecture Notes in Operations Research, 513–22. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5256-2_41.
Повний текст джерелаWestkämper, Engelbert, and Andreas Friedel. "Environment-oriented Assessments for the Life Cycle Engineering." In Life Cycle Networks, 264–75. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6381-5_22.
Повний текст джерелаLockie, Sean. "Life Cycle Costing and Sustainability Assessments." In Design Economics for the Built Environment, 262–83. Chichester, UK: John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118944790.ch19.
Повний текст джерелаNissen, N. F., H. Griese, A. Middendorf, J. Müller, H. Pötter, and H. Reichl. "Comparison of simplified environmental assessments versus full life cycle assessment (LCA) for the electronics designer." In Life Cycle Networks, 301–12. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6381-5_25.
Повний текст джерелаBednarz, Andreas, Julia Beier, Thomas Grünenwald, Birgit Himmelreich, Bärbel Hundt, Florian A. Jaeger, Martin Kirchner, et al. "Life Cycle Management in Industry—Supporting Business with Life Cycle Based Assessments." In Designing Sustainable Technologies, Products and Policies, 351–63. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-66981-6_39.
Повний текст джерелаТези доповідей конференцій з теми "Dynamic Life Cycle Assessments"
HU, Ming. "Dynamic Life Cycle Assessment Integrating Cultural Value." In 7th International Building Physics Conference. Syracuse, New York: International Association of Building Physics (IABP), 2018. http://dx.doi.org/10.14305/ibpc.2018.ms-1.02.
Повний текст джерелаMegange, Patrice, Pierre Ngae, Amir-Ali Feiz, Ahmed Melhaoui, Amer Chpoun, and Thien-Phu Le. "Dynamic Life Cycle Assessment of a Double Glazing Bay." In 2018 6th International Renewable and Sustainable Energy Conference (IRSEC). IEEE, 2018. http://dx.doi.org/10.1109/irsec.2018.8702852.
Повний текст джерелаRussell-Smith, Sarah, and Michael Lepech. "Dynamic Life Cycle Assessment of Building Design and Retrofit Processes." In International Workshop on Computing in Civil Engineering 2011. Reston, VA: American Society of Civil Engineers, 2011. http://dx.doi.org/10.1061/41182(416)94.
Повний текст джерелаCollinge, William O., Liang Liao, Haifeng Xu, Christi L. Saunders, Melissa M. Bilec, Amy E. Landis, Alex K. Jones, and Laura A. Schaefer. "Enabling dynamic life cycle assessment of buildings with wireless sensor networks." In 2011 IEEE International Symposium on Sustainable Systems and Technology (ISSST). IEEE, 2011. http://dx.doi.org/10.1109/issst.2011.5936846.
Повний текст джерелаReap, John, Bert Bras, Patrick J. Newcomb, and Carol Carmichael. "Improving Life Cycle Assessment by Including Spatial, Dynamic and Place-Based Modeling." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/dfm-48140.
Повний текст джерелаBouchenot, Thomas, Kirtan Patel, Ali P. Gordon, and Sachin Shinde. "Life Prediction Modeling of Combined High-Cycle Fatigue and Creep." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-14495.
Повний текст джерелаCollinge, W. O., A. E. Landis, A. K. Jones, L. A. Schaefer, and M. M. Bilec. "Integrating Indoor environmental quality metrics in a dynamic life cycle assessment framework for buildings." In 2012 IEEE International Symposium on Sustainable Systems and Technology (ISSST 2012). IEEE, 2012. http://dx.doi.org/10.1109/issst.2012.6227992.
Повний текст джерелаHeggen, Hans Olav, Joe Bratton, David Kemp, Jun Liu, and Jason Austin. "Fitness for Service of Dents Associated With Metal Loss due to Corrosion." In 2014 10th International Pipeline Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/ipc2014-33646.
Повний текст джерелаMaayan Tardif, Jalomi, Vasco Medici, and Pierryves Padey. "Dynamic life cycle assessment of electricity demand of buildings with storage systems – potential for environmental impact mitigation." In 2021 Building Simulation Conference. KU Leuven, 2021. http://dx.doi.org/10.26868/25222708.2021.30144.
Повний текст джерелаCheah, Lynette W. "Materials flow analysis and dynamic life-cycle assessment of lightweight automotive materials in the U.S. passenger vehicle fleet." In 2009 IEEE International Symposium on Sustainable Systems and Technology (ISSST). IEEE, 2009. http://dx.doi.org/10.1109/issst.2009.5156692.
Повний текст джерелаЗвіти організацій з теми "Dynamic Life Cycle Assessments"
Frischknecht, Rolf, Rene Itten, Parikhit Sinha, Mariska de Wild-Scholten, Jia Zhang, Garvin A. Heath, and Carol Olson. Life Cycle Inventories and Life Cycle Assessments of Photovoltaic Systems. Office of Scientific and Technical Information (OSTI), March 2015. http://dx.doi.org/10.2172/1561526.
Повний текст джерелаJensen, Melanie, Steven Schlasner, Kerryanne Leroux, Charles Gorecki, and Nicholas Azzolina. Comparison of Non-EOR and EOR Life Cycle Assessments. Office of Scientific and Technical Information (OSTI), October 2019. http://dx.doi.org/10.2172/1874451.
Повний текст джерелаMandelbaum, Jay. Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs). Fort Belvoir, VA: Defense Technical Information Center, November 2006. http://dx.doi.org/10.21236/ada465212.
Повний текст джерелаCameron, Stephen, and James Heckman. Life Cycle Schooling and Dynamic Selection Bias: Models and Evidence for Five Cohorts. Cambridge, MA: National Bureau of Economic Research, January 1998. http://dx.doi.org/10.3386/w6385.
Повний текст джерелаGreenstein, Shane, and James Wade. Dynamic Modeling of the Product Life Cycle in the Commercial Mainframe Computer Market, 1968-1982. Cambridge, MA: National Bureau of Economic Research, August 1997. http://dx.doi.org/10.3386/w6124.
Повний текст джерелаGilleskie, Donna, Euna Han, and Edward Norton. Disentangling the Contemporaneous and Dynamic Effects of Human and Health Capital on Wages over the Life Cycle. Cambridge, MA: National Bureau of Economic Research, July 2016. http://dx.doi.org/10.3386/w22430.
Повний текст джерелаQu, Deyang. Developing an In-situ Formed Dynamic Protection Layer to Mitigate Lithium Interface Shifting: Preventing Dendrite Formation on Metallic Lithium Surface to Facilitate Long Cycle Life of Lithium Solid-State Batteries. Office of Scientific and Technical Information (OSTI), December 2022. http://dx.doi.org/10.2172/1907035.
Повний текст джерелаCalahorra-Jimenez, Maria. Contracting Strategies: A Different Approach to Address Long-term Performance. Mineta Transportation Institute, July 2022. http://dx.doi.org/10.31979/mti.2021.2130.
Повний текст джерелаCalahorra-Jimenez, Maria. Contracting Strategies: A Different Approach to Address Long-term Performance. Mineta Transportation Institute, July 2022. http://dx.doi.org/10.31979/mti.2022.2130.
Повний текст джерелаJung, Carina, Matthew Carr, Denise Lindsay, Eric Fleischman, and Chandler Roesch. Microbiome perturbations during domestication of the green June beetle (Cotinis nitida). Engineer Research and Development Center (U.S.), February 2022. http://dx.doi.org/10.21079/11681/43342.
Повний текст джерела