Готові списки джерел за темами / Ductility

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Ductility"

Автор: Grafiati

Опубліковано: 4 червня 2021

Оновлено: 28 липня 2024

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Ductility".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Ductility"

Mander, John B. "Beyond ductility." Bulletin of the New Zealand Society for Earthquake Engineering 37, no. 1 (March 31, 2004): 35–44. http://dx.doi.org/10.5459/bnzsee.37.1.35-44.

Повний текст джерела

Анотація:

Although the precepts of capacity design and detailing for ductile performance are now well established, the end-user community is now demanding more in terms of predictable performance with an expectation that structures should survive earthquakes with minimal and preferably no damage. The paper first explains the shortcomings of present designs from a probabilistic fragility point-of-view, and then goes on to explain how performance can be improved by making a paradigm shift. This paper examines the emerging quest where structural engineering researchers are investigating design alternatives that strive for damage avoidance.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhu, Yuntian T., and Xiaozhou Liao. "Retaining ductility." Nature Materials 3, no. 6 (June 2004): 351–52. http://dx.doi.org/10.1038/nmat1141.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Reyes-Salazar, Alfredo. "Ductility and ductility reduction factor for MDOF systems." Structural Engineering and Mechanics 13, no. 4 (April 25, 2002): 369–85. http://dx.doi.org/10.12989/sem.2002.13.4.369.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Darveaux, Robert, Michael Johnson, and Corey Reichman. "Solder Joint Ductility." International Symposium on Microelectronics 2012, no. 1 (January 1, 2012): 001046–56. http://dx.doi.org/10.4071/isom-2012-thp15.

Повний текст джерела

Анотація:

Solder joint arrays were tested under tensile loading to determine the strain-to-failure (ductility) under a wide range of conditions. The trends in ductility with alloy, joint size, pad metallization, and test conditions were quantified and discussed. 63Sn37Pb solder joints showed a significant increase in ductility as applied stress is reduced below 40MPa. Lead free alloy ductility was much less sensitive to applied stress level. Hence, at low stress levels, eutectic SnPb has greater ductility than the lead free alloys. Larger joints showed greater ductility in a constant crosshead rate test compared to smaller joints. This is believed to be a function of the load train stiffness. Such a discrepancy was not observed in the constant load test method.

Стилі APA, Harvard, Vancouver, ISO та ін.

Grocholski, Brent. "Pathways for ductility." Science 370, no. 6512 (October 1, 2020): 70.12–72. http://dx.doi.org/10.1126/science.370.6512.70-l.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sealy, Cordelia. "Defects define ductility." Materials Today 10, no. 4 (April 2007): 15. http://dx.doi.org/10.1016/s1369-7021(07)70041-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gensamer, Maxwell. "Strength and Ductility." Metallography, Microstructure, and Analysis 6, no. 2 (March 30, 2017): 171–85. http://dx.doi.org/10.1007/s13632-017-0341-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, H., Y. Zhang, and S. Qin. "A Study on Ductility of Prestressed Concrete Pier Based on Response Surface Methodology." Engineering, Technology & Applied Science Research 6, no. 6 (December 18, 2016): 1253–57. http://dx.doi.org/10.48084/etasr.855.

Повний текст джерела

Анотація:

The ductility of prestressed concrete pier is studied based on response surface methodology. Referring to the pervious prestressed concrete pier, based on Box-Behnken design, the ductility of 25 prestressed concrete piers is calculated by numerical method. The relationship between longitudinal reinforcement ratio, shear reinforcement ratio, prestressed tendon quantity, concrete compressive strength and ductility factor is gotten. The influence of the longitudinal reinforcement ratio, the shear reinforcement ratio, the prestressed tendon quantity and concrete compressive strength to curvature ductility is discussed. Then the ductility regression equation is deduced. The result showed that the influence of the prestressed tendon quantity to the ductility of prestressed concrete pier is significant. With the increasing of the prestressed tendon quantity, the curvature ductility curved reduces. With the increasing of shear reinforcement ratio and compressive strength of concrete, the curvature ductility increases linearly. And the influence of the longitudinal reinforcement ratio to ductility of the prestressed concrete pier is insignificant.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hemamathi, A., K. P. Jaya, and Binu Sukumar. "Evaluation of Ductility of Precast Column Foundation Connections." Indian Journal Of Science And Technology 16, no. 20 (May 27, 2023): 1516——1526. http://dx.doi.org/10.17485/ijst/v16i20.2306.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Urbini, Flavio, Emanuela Caracuzzo, Antonio Chirumbolo, and Antonino Callea. "Individual and Organizational Ductility: Conceptualization, Development, and Validation of a New Scale." Behavioral Sciences 14, no. 6 (June 20, 2024): 511. http://dx.doi.org/10.3390/bs14060511.

Повний текст джерела

Анотація:

In this article, we conceptualize a new construct named “ductility” and propose a measurement instrument. We examine psychometric properties—the factorial validity and reliability of the Ductility Scale in Italy. The results of exploratory factor analysis showed that the scale has a two-factor structure, namely, individual and organizational ductility. The scale reliability was excellent for both dimensions (individual ω = 0.82; organizational ω = 0.85). The participants were employees from private and public organizations (n = 466). We tested the construct validity of the Ductility Scale. The invariance of the measurement model tested via multigroup confirmative factor analysis showed that the Ductility Scale was invariant across gender. In addition, we found ductility to be positively related to proactive personality and work engagement. These preliminary results show that the Ductility Scale is a reliable and valid measure. In addition, our findings illustrate the potential usefulness of the ductility construct via the newly developed scale.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Ductility"

Mohamed, Z. M. E. Q. "Hot ductility of steels." Thesis, City University London, 1988. http://openaccess.city.ac.uk/8348/.

Повний текст джерела

Анотація:

The hot tensile test has been used for a variety of steels, to investigate the influence of such factors as inclusions, precipitation, phase transformation and grain size on hot ductility. Tests were performed in the temperature range 700-1000 °C and at a strain .4 _2 1 rates of (10 —10 S ), generally to simulate the conditions experienced during the straightening operation in the continuous casting process in which transverse cracks propagate. Two zones of reduced ductility can be identified. The Y-a transformation zone which has been shown to produce a significant ductility trough due to strain concentration in the softer ferrite films surrounding the V grains, cating voiding around he MnS inclusions which link to give intergranular failure, and factors which alter the A3 temperature, such as carbon content, have been shown to produce a change in the temperature at which the ductility trough occurs. The second zone of reduced hot ductility was observed in the austenite region, due to the retardation of dynamic recrystallisation associated with the presence of fine carbides, nitrides and/or inclusions precipitates at the austenite grain boundaries, which allows intergranular cracks to develop. The depth and width of this ductility trough is primarily dependent on the size and amount of precipitates present. The influence of MnS inclusions in reducing hot ductility has been noted above and below the Ae3 temperature. Above the Ae3 , inclusions act in a similar way to fine precipitation preventing dynamic recrystallisation and below the Ae3 , they offer more sites for micro-voiding to occur. Although grain size refinement improves ductility, it does so as long as similarity in precipitate volume fraction and size exist. Improved hot ductility has been achieved by adding Ca to the steel which reduces the amount of l9nS inclusions precipitated during cooling from solution temperature at the austenite grain boundaries.

Стилі APA, Harvard, Vancouver, ISO та ін.

Abu, Shousha R. I. "Hot ductility of steels." Thesis, City University London, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.305120.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wassouf, Mohamad. "Bond and ductility of concrete reinforced with various steel bars surface and ductility conditions." Thesis, University of Birmingham, 2015. http://etheses.bham.ac.uk//id/eprint/6272/.

Повний текст джерела

Анотація:

Reinforced concrete is a wide field for researches and studies in civil engineering subject. It is due to the fact that reinforced concrete is the most widely used material for the infrastructure in the world. Reinforced concrete consists of two main materials: reinforcing steel and concrete, each of those two materials has its own effect on the performance of the structure. In this thesis, the change in RC performance due to different steel properties and specifications will be investigated. The study focuses on the bond interaction between steel and concrete and the flexural behaviour of RC beams. Pull-out forces have been exerted on the reinforcing bars in RC blocks to examine the impact of steel properties on the bond strength and failure mode of the blocks. In addition to that, flexural tests have been conducted on simply supported RC beams to investigate how reinforcement properties can affect the ductility of reinforced concrete. Comparison of results of the previous two tests with codes and analytical models have been carried out to verify the outcome of this research.

Стилі APA, Harvard, Vancouver, ISO та ін.

Crowther, David Neville. "The hot ductility of steels." Thesis, City, University of London, 1986. http://openaccess.city.ac.uk/19368/.

Повний текст джерела

Анотація:

Hot tensile tests have been performed on a variety of plain carbon and micro-alloyed steels, in order to determine the influence of such factors as phase transformation, grain size and precipitation on hot ductility. The γ-∝ phase transformation has been shown to produce a significant ductility trough in the high temperature tensile behaviour of plain C steels, and factors which alter the A3 temperature, such as cooling rate and C content, have been shown to produce a change in the temperature at which the ductility trough occurs. This ductility trough is due to strain concentration in the ferrite films surrounding the grains, leading to intergranular failure. It has also been shown that an increase in grain size can increase the depth and width of this ductility trough. For plain C steels with a C content of 0.35% or above, and for some micro-alloyed steels, a ductility trough may also be present in the single phase austenite region. For the plain C steel, this is. believed to be due to the increase in activation energy for deformation associated with increasing C contents. In microalloyed steels, the trough is due to the retardation of dynamic recrystallization associated with the presence of fine carbide and/or nitride precipitates, which allows intergranular cracks to develop. The depth and width of this ductility trough is primarily dependent on the size and amount of precipitates present, although it has been shown that grain size has a secondary effect. In C-Mn-Nb-Al steels, factors which tend to reduce hot ductility by reducing precipitate size and/or increasing the amount of precipitate present include the reheating of tensile samples cast 'in-situ', the introduction of temperature oscillations during COOling from solution temperature, and the presence of large amounts of'dynamic' precipitates formed during tensile testing. In C-Mn-V-Al steels, 'dynamic' precipitates do not have such an adverse effect. Strain rate was also shown to have an important influence on hot ductility, and decreasing strain rates have been Shown to reduce hot ductility in both plain carbon and micro-alloyed steels.

Стилі APA, Harvard, Vancouver, ISO та ін.

Eon, Kang Shin. "Hot ductility of TWIP steels." Thesis, City University London, 2014. http://openaccess.city.ac.uk/13703/.

Повний текст джерела

Анотація:

TWIP (Twining Induced Plasticity) steel is very promising AHSS (Advanced High Strength Steel) grade owing to its superior toughness and ductility. Recently it has attracted the interest of the automotive and steelmaking industries, as the need for reducing weight to provide better fuel efficiency is of paramount importance with the gradual depletion of fuel resources. A high Al, TWIP steel is being commercially developed as Al has been found very well in delaying fraction in deep drawn products. However these steels are difficult to continuous cast and cracking can occur at the slab surface. Therefore it becomes very important to gain an understanding of the cause of this cracking, in order to prevent their occurrence. To assess the likelihood of the cracking in these high Al TWIP steel slabs (1~1.5%Al, 0.6%C, 18%Mn), conventional hot tensile tests were performed to simulate the continuous casting process. A variety of TWIP steels were tested in order to determine the influence of such factors as chemical composition, cooling rate and thermal cycle on hot ductility. Using a cooling rate of 60oC/min after heating to 1250oC, ductility was generally <40% RA (Reduction of Area) indicating that these high Al TWIP steels it will be difficult to cast without transverse cracking occurring. The 1.5%Al containing steels had worse ductility than the low Al containing steels (0.02%Al) because of the presence of large amounts of AlN precipitated at the austenite grain boundaries. Reducing the Al and N level improved ductility. Higher strength Nb/V high Al containing TWIP steels were also examined although ductility was likely to be worse than the simpler microalloying free TWIP steels as was confirmed. Increasing the cooling rate from 60 to 180oC/min after melting caused the ductility to further deteriorate and high N levels produced only a small reduction in the ductility, probably because ductility is so poor. Increasing the S level from 0.003 to 0.01% caused the ductility to deteriorate in TWIP steels free of microalloying. Increasing the S level to 0.023% caused no further deterioration in ductility even though the MnS volume fraction increased. The worse ductility in the higher S steels was not caused by a simple increase in the sulphide volume fraction but more a consequence of the change from coarse hexagonal plate AlN, which are mainly within the matrix and so have little influence on the hot ductility, to very long dendritic rod precipitates, which are situated at the dendritic or close to the austenite grain boundaries. This dendritic precipitation was rarely observed in the low S steel. The MnS inclusions appeared to act as nucleation sites for the precipitation of AlN and when there was few inclusions precipitation of AlN was mainly confined to the matrix. The ductility of Nb containing high Al, TWIP steels was very poor in the as-cast condition. Adding B and Ti still gave rise to extremely poor ductility when a cooling rate of 60 oC/min was used but reducing it to 12oC/min caused the ductility to improve so that RA values were now close to the 35~40% RA value required to avoid transverse cracking. To improve ductility B and Ti additions were examined. 0.04%Ti and 0.002%B are required to ensure good hot ductility in high Al, TWIP steels. Sufficient Ti is needed to remove all the N as TiN so preventing AlN precipitating as films over the austenite grain surfaces. B is also needed as it can segregate to the boundaries and strengthen them. A SIMS technique confirmed that B had indeed segregated to the boundaries. The slower cooling rate 10~15oC/min compared to 60oC/min will result in the optimum segregation of B as well as coarsening the TiN precipitates so they are no longer effective in reducing the ductility. Following all these recommendations, i.e. a low S level, slow secondary cooling rate, a Ti level above the stoichiometric for TiN and a boron addition of 0.002%, transverse cracking was avoided commercially in these very difficult to cast high strength TWIP steels.

Стилі APA, Harvard, Vancouver, ISO та ін.

Occhiuzzi, Antonio. "Seismic ductility of base isolated structures." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/35011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Henriques, José Alexandre Gouveia. "Ductility requirements in shear bolted connections." Master's thesis, Departamento de Engenharia Civil, 2007. http://hdl.handle.net/10316/15762.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Soesianawati, M. T. "Limited ductility design of reinforced concrete columns." Thesis, University of Canterbury. Department of Civil Engineering, 1986. http://hdl.handle.net/10092/3643.

Повний текст джерела

Анотація:

This report describes an experimental and analytical investigation of the strength and ductility of reinforced concrete columns. Four columns of square cross-section were tested under axial compression loading and cyclic lateral loading applied at mid-height which simulated seismic loading. The main variable investigated was the quantity of transverse confining steel used, which ranged between 17 to 46 percent of the NZS 3101:1982 recommended quantity for ductile detailing. The experimental results are reported in the form of lateral loaddisplacement and lateral load-curvatures hysteresis loops, curvature profiles, transverse steel strain distributions and concrete compressive strains. The results are discussed and compared with the analytical predictions. A modified equation for the quantity of confining reinforcement in rectangular columns is recommended. Conclusions are made regarding the ductility available from columns containing substantially less transverse confining reinforcement than recommended by the New Zealand concrete design code.

Стилі APA, Harvard, Vancouver, ISO та ін.

Lobato, de Sousa Monteiro de Morais Miguel Nuno. "Ductility of beams prestressed with FRP tendons." Thesis, University of Cambridge, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.614171.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wolff, Ira M. "Ductility in high chromium super-ferritic alloys." Doctoral thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/22200.

Повний текст джерела

Анотація:

Includes reprints of author's related articles.
Bibliography: pages 187-201.
The competition between microfracture and plastic flow has been studied in relation to the thermomechanical processing parameters and minor element chemistry of wrought super-ferritic alloys based on a composition of Fe-40wt% Cr. These alloys have been developed for corrosion-resistant applications, specifically by micro-alloying with platinum group metals to induce cathodic modification, but their use has been hampered by inadequate toughness at ambient temperatures. Brittle cleavage of the alloys is a consequence of the high resistance to plastic flow required to accommodate local stresses, such as those found ahead of a loaded crack. Once initiated, a crack propagates in a brittle manner with minimal ductility. The impact toughness therefore relies on the ability of the alloys to withstand crack initiation. The frequency of the crack initiation events is related to the distribution of secondary phases within the matrix and at the grain boundaries. A direct means of improving the toughness and the ductility is accordingly via annealing cycles and minor alloying additions to control the precipitation of second phases. The ductility is enhanced by raising the mobile dislocation density, and this may be achieved by pre-straining recrystallised material, or increasing the number of dislocation sources in the otherwise source-poor material. The generation of mobile dislocations by prismatic punching at second phase particles in response to local or tessellated stresses was found to increase the ductility and the impact toughness of the alloy. The addition of nickel also increases the brittle fracture resistance by promoting stress accommodation at the crack tip, a result which can, in principle, be explained on the basis of enhanced dislocation dynamics. The tendency of the alloys to form a stable recovered substructure was identified as a critical parameter for both the mechanical and corrosion properties. The low-angle dislocation sub-arrays contribute to overall strain-hardening, but destabilise the passivity of the alloys in acid media. In practice, rationalisation of the microstructural parameters has enabled the practicable fabrication of tough, corrosion-resistant alloys, suitable for commercial development.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Ductility"

Zhao, Yonghao, and Xiaozhou Liao. Ductility of bulk nanostructured materials. Stafa-Zurich, Switzerland: Trans Tech, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gioncu, Victor. Ductility of seismic resistant steel structures. New York: Spon Press, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

M, Mazzolani Federico, ed. Ductility of seismic resistant steel structures. London: Spon Press, 2002.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

1943-, Usami Tsutomu, Itoh Yoshito 1952-, and International Colloquium on Stability and Ductility of Steel Structures (5th : 1997 : Nagoya, Japan), eds. Stability and ductility of steel structures. Amsterdam: Elsevier, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Guha, Sumit. Improving the low temperature ductility of NiAl. [Washington, DC]: National Aeronautics and Space Administration, 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Salomon, R. J. The ductility behaviour of incoloy alloy MA956. Birmingham: University of Birmingham, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

O, Scattergood Ronald, and United States. National Aeronautics and Space Administration., eds. Ductile-regime turning of germanium and silicon. [Washington, DC: National Aeronautics and Space Administration, 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

V, Nathal Michael, and United States. National Aeronautics and Space Administration., eds. Tensile behavior of Fe-40A1 alloys with 8 and Zr additions. [Washington, DC]: National Aeronautics and Space Administration, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Ductility"

Sandström, Rolf. "Creep Ductility." In Basic Modeling and Theory of Creep of Metallic Materials, 257–73. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49507-6_13.

Повний текст джерела

Анотація:

AbstractFor a number of creep resistant steels, the creep ductiliy decreases with increasing temperature and time. As a function of stress, the ductiity is often describe with an S-shaped curve with an upper and a lower shelf level. As a function of time, the S-shape is inverted. If the ductility is high, the rupture is referred to as ductile, and for low ductility levels as brittle. Ductile rupture is believed to be due to a plastic instability such as necking. Brittle rupture on the other hand is controlled by the nucleation, growth and linkage of creep cavities. With the help of the basic models for creep deformation and cavitation, the rupture stress and ductility can be predicted. Several models exist for the influence of multiaxiality on the creep ductility. Although the models are based on different principles, they predict approximately the same behavior, which is verified by comparison to rupture data for notched bars.

Стилі APA, Harvard, Vancouver, ISO та ін.

Gooch, Jan W. "Ductility." In Encyclopedic Dictionary of Polymers, 247. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4087.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bhanja, Santanu. "Ductility design." In Reinforced Concrete Design, 277–305. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003415398-17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zeris, C. "Behavior Factor and Ductility." In Encyclopedia of Earthquake Engineering, 1–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-36197-5_118-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zeris, Christos A. "Behavior Factor and Ductility." In Encyclopedia of Earthquake Engineering, 260–80. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-35344-4_118.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Papagiannopoulos, George A., George D. Hatzigeorgiou, and Dimitri E. Beskos. "Ductility-Based Plastic Design." In Seismic Design Methods for Steel Building Structures, 195–228. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80687-3_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tsuji, Nobuhiro, Shigenobu Ogata, Haruyuki Inui, Isao Tanaka, and Kyosuke Kishida. "Proposing the Concept of Plaston and Strategy to Manage Both High Strength and Large Ductility in Advanced Structural Materials, on the Basis of Unique Mechanical Properties of Bulk Nanostructured Metals." In The Plaston Concept, 3–34. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7715-1_1.

Повний текст джерела

Анотація:

AbstractAdvanced structural materials are required to show both high strength and large ductility/toughness, but we have not yet acquired the guiding principle for that. The bulk nanostructured metals are polycrystalline metallic materials having bulky dimensions and average grain sizes smaller than 1 μm. Bulk nanostructured metals show very high strength compared with that of the coarse-grained counterparts, but usually exhibit limited tensile ductility, especially small uniform elongation below a few %, due to the early plastic instability. On the other hand, we have recently found that particular bulk nanostructured metals can manage high strength and large tensile ductility. In such bulk nanostructured metals, unusual deformation modes different from normal dislocation slips were unexpectedly activated. Unusual <c+a> dislocations, deformation twins with nano-scale thickness, and deformation-induced martensite nucleated from grain boundaries in the bulk nanostructured Mg alloy, high-Mn austenitic steel, and Ni-C metastable austenitic steel, respectively. Those unexpected deformation modes enhanced strain hardening of the materials, leading to high strength and large tensile ductility. It was considered that the nucleation of such unusual deformation modes was attributed to the scarcity of dislocations and dislocation sources in each recrystallized ultrafine grain, which also induced discontinuous yielding with clear yield drop universally recognized in bulk nanostructured metals having recrystallized structures. For discussing the nucleation of different deformation modes in atomistic scales, the new concept of plaston which considered local excitation of atoms under singular dynamic fields was proposed. Based on the findings in bulk nanostructured metals and the concept of plaston, we proposed a strategy for overcoming the strength-ductility trade-off in structural metallic materials. Sequential nucleation of different deformation modes would regenerate the strain-hardening ability of the material, leading to high strength and large tensile ductility. The strategy could be a guiding principle for realizing advanced structural materials that manage both high strength and large tensile ductility.

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Qi, and Shunzhong Yao. "Seismic Performance Analysis of Non-uniformly Corroded Reinforced Concrete Column Assembly Joints Strengthened with CFRP." In Novel Technology and Whole-Process Management in Prefabricated Building, 279–87. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_30.

Повний текст джерела

Анотація:

AbstractIn order to analyze the seismic behavior of non uniformly corroded reinforced concrete column assembly joints strengthened with CFRP. In this paper, one corroded and unreinforced RC column specimen and four corroded but CFRP Reinforced RC column specimens were fabricated. According to the hysteretic curve, the skeleton curve change and stiffness degradation of each specimen are analyzed, and the load displacement condition of the assembled joint is judged. According to the strain of the assembled joint of reinforced concrete column, the ductility, energy consumption and other properties of each joint are analyzed, so as to analyze the seismic performance of the specimen. The results show that the unreinforced reinforced concrete column specimens have small ductility, low energy consumption and poor seismic effect; The reinforced concrete column specimens strengthened with CFRP have larger ductility, higher energy consumption and better seismic performance. Conclusion: the seismic performance is related to the stiffness, ductility coefficient, energy dissipation coefficient and other indicators. The larger the above indicators, the better the seismic performance, which plays an important role in improving the stability of the assembly structure.

Стилі APA, Harvard, Vancouver, ISO та ін.

Moritoki, Hitoshi. "Free Surface Ductility in Upsetting." In Anisotropy and Localization of Plastic Deformation, 647–50. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3644-0_151.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Renić, Tvrtko, Tomislav Kišiček, and Ivan Hafner. "Curvature Ductility of FRPRC Walls." In Lecture Notes in Civil Engineering, 1886–93. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32519-9_189.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Ductility"

Piermattei, E. J., B. F. Ronalds, and D. J. Stock. "Jacket Ductility Design." In Offshore Technology Conference. Offshore Technology Conference, 1990. http://dx.doi.org/10.4043/6383-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Moghaddam, Hasan A., and Maysam Samadi. "On the Effect of Ductility of Confining Material on Concrete Ductility." In Structures Congress 2009. Reston, VA: American Society of Civil Engineers, 2009. http://dx.doi.org/10.1061/41031(341)28.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Şen, Ornela Lalaj, Mehmet Çevik, and Ali Haydar Kayhan. "Sectional Ductility of Wide Beams." In International Students Science Congress. Izmir International Guest Student Association, 2021. http://dx.doi.org/10.52460/issc.2021.051.

Повний текст джерела

Анотація:

Wide beam structures are categorized as Limited Ductility Class in Turkey and elsewhere and considered not fit for construction in areas of high seismicity. One of the main reasons that wide beam structures are considered to possess limited ductility is the perceived low local ductility of the wide beams, due to the high reinforcement ratios. Wide beams have small depths, which indeed require higher reinforcement ratios to produce the necessary moment capacities, as compared to normal beams. However, the low local ductility of the wide beams can be contested. This paper presents a database of more than 150 beam sections, some of which are normal and some of which are wide beams. The moment-rotation relationships were computed for all the sections, and the sectional ductility was calculated from the yield and ultimate rotations. The relations between sectional ductility and other parameters such as section aspect ratio, longitudinal reinforcement ratio and transverse reinforcement ratio were investigated. An example of the relation between ductility and section properties, in this case section aspect ratio is shown. Both positive and negative ductility were calculated and plotted. It should be noted that beams with section ratio of 0.5 are conventional beams, while the rest are wide beams. The values of ductility vary for all beams, and conventional beams have a slightly wider spread. While these parameters vary within the section database, the sectional ductility oscillates around 30, and no clear correlations could be established for any of the above-mentioned parameters. There were no significant differences between the average sectional ductility of conventional and wide beams. For this dataset, the mean positive ductility was 29.66 and 29.33 for conventional and wide beams respectively, and the mean negative ductility was 28.96 and 31.50 for conventional and wide beams, respectively.

Стилі APA, Harvard, Vancouver, ISO та ін.

Orlacchio, Mabel, Georgios Baltzopoulos, and Iunio Iervolino. "CONSTANT-DUCTILITY RESIDUAL DISPLACEMENT RATIOS." In 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Methods in Structural Dynamics and Earthquake Engineering. Athens: Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) Greece, 2019. http://dx.doi.org/10.7712/120119.7271.18881.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yamaguchi, N., and M. Nakao. "Ductility-Related Force Modification Factors of Wood Constructions with Shear Walls of Different Ductility." In ATC and SEI Conference on Improving the Seismic Performance of Existing Buildings and Other Structures. Reston, VA: American Society of Civil Engineers, 2009. http://dx.doi.org/10.1061/41084(364)73.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Katz, A. "Ductility of high performance cementitious composites." In International RILEM Symposium on Concrete Science and Engineering: A Tribute to Arnon Bentur. RILEM Publications SARL, 2004. http://dx.doi.org/10.1617/2912143586.011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Fantetti, Nicolas, and Martin Szczesniak. "High Ductility Magnesium Seat Back Structure." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1994. http://dx.doi.org/10.4271/940404.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yamaguchi, Nobuyoshi, Masato Nakao, Masahide Murakami, Kenji Miyazawa, Adolfo Santini, and Nicola Moraci. "Calculation Method of Lateral Strengths and Ductility Factors of Constructions with Shear Walls of Different Ductility." In 2008 SEISMIC ENGINEERING CONFERENCE: Commemorating the 1908 Messina and Reggio Calabria Earthquake. AIP, 2008. http://dx.doi.org/10.1063/1.2963911.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Howser, Rachel, A. Laskar, and Y. L. Mo. "Effect of Flexural Ductility on Shear Capacity." In Structures Congress 2008. Reston, VA: American Society of Civil Engineers, 2008. http://dx.doi.org/10.1061/41016(314)9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Browning, Benjamin, Lonnie Marvel, and Riyadh Hindi. "Torsional Ductility of Circular Concrete Bridge Columns." In Structures Congress 2007. Reston, VA: American Society of Civil Engineers, 2007. http://dx.doi.org/10.1061/40946(248)72.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Ductility"

Billone, M., T. Burtseva, Y. Chen, and Z. Han. Ductility of Zircaloy-4 Sibling Pin Cladding. Office of Scientific and Technical Information (OSTI), February 2023. http://dx.doi.org/10.2172/1973847.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bair, Jacob, David Abrecht, Nicole Overman, Anthony Guzman, David Collins, Richard Cox, and Shawn Riechers. Improving Ductility of Hydride Embrittled Zirconium: Final Report. Office of Scientific and Technical Information (OSTI), August 2020. http://dx.doi.org/10.2172/2203117.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Nieh, T., C. Schuh, M. Caturla, and A. Hodge. Enhancement of Strength and Ductility in Bulk Nanocrystalline Metals. Office of Scientific and Technical Information (OSTI), February 2004. http://dx.doi.org/10.2172/15013859.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Taleff, E. M., G. A. Henshall, D. R. Lesuer, T. G. Nieh, and J. Wadsworth. Enhanced tensile ductility of coarse-grain Al-Mg alloys. Office of Scientific and Technical Information (OSTI), December 1995. http://dx.doi.org/10.2172/201796.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rath, B. B., M. A. Imam, B. K. Damkroger, and G. R. Edwards. High temperature ductility loss in titanium alloys -- A review. Office of Scientific and Technical Information (OSTI), February 1994. http://dx.doi.org/10.2172/10124556.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kang, Bruce. Ductility Enhancement of Molybdenum Phase by Nano-sized Oxide Dispersions. Office of Scientific and Technical Information (OSTI), July 2008. http://dx.doi.org/10.2172/1109082.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Geltmacher, A., and D. A. Koss. On Specimen Shape Effects and the Ductility of Porous Metals. Fort Belvoir, VA: Defense Technical Information Center, February 1989. http://dx.doi.org/10.21236/ada206216.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bruce Kang. Ductility Enhancement of Molybdenum Phase by Nano-sizedd Oxide Dispersions. Office of Scientific and Technical Information (OSTI), July 2008. http://dx.doi.org/10.2172/952943.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schulson, E. M. Strength and ductility of L1{sub 2}-based intermetallics. Final report. Office of Scientific and Technical Information (OSTI), January 2002. http://dx.doi.org/10.2172/771228.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kingstedt, Owen, Ashley Spear, Jiyoung Chang, and Ryan Berke. Final Report of the Project DE-NE0008799 Benchmarking Microscale Ductility Measurements. Office of Scientific and Technical Information (OSTI), December 2022. http://dx.doi.org/10.2172/1906639.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!