Готові списки джерел за темами / Dentistry; implant dentistry; dental implant

Добірка наукової літератури з теми "Dentistry; implant dentistry; dental implant"

Автор: Grafiati

Опубліковано: 10 грудня 2022

Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Dentistry; implant dentistry; dental implant".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Dentistry; implant dentistry; dental implant"

Greval, Jasem, Labibah Motaleb, and Sunil Bhatia. "The true cost of dental implant tourism: A case report." Dental Update 47, no. 11 (December 2, 2020): 956–59. http://dx.doi.org/10.12968/denu.2020.47.11.956.

Повний текст джерела

Анотація:

Many patients travel abroad seeking cosmetic dental treatment, in particular dental implants. However, there are hundreds of dental implant systems being used globally by dentists of all training backgrounds. Furthermore, complications can occur that patients may expect their general dental practitioner in the UK to be able to manage. The following report describes the case of a 71-year-old, medically compromised patient who presented with complaints consistent with the immediate failure of dental implants that happened to be placed abroad. On closer examination, the dental implants themselves were highly questionable in their design and placement. An incidental finding was also made in the maxillary sinus. CPD/Clinical Relevance: To acknowledge that implant dentistry is increasing in popularity as patients have the freedom to access dental implant treatment globally. UK dentists are expected to manage these dental implants on the return of patients to the UK who may present with post-operative complications involving unknown dental implant systems.

Стилі APA, Harvard, Vancouver, ISO та ін.

Vaidya, S., J. Rajkarnikar, SB Rana, A. Bhochhibhoya, and A. Khapung. "Current trends in dental implant practice among dentists in Nepal." Journal of Nepalese Prosthodontic Society 4, no. 1 (June 30, 2021): 11–19. http://dx.doi.org/10.3126/jnprossoc.v4i1.42309.

Повний текст джерела

Анотація:

Introduction: Implant dentistry is one of the fastest growing specialty in the field in dentistry. Yet there is a paucity of literature regarding the prevalence and the current trends of implant dentistry practice among dentists working in Nepal. Thus, the objective of this study was to assess the prevalence and current trends of dental implants practice among the dentists working in Nepal. Method: A cross sectional, online study was done among 267 Nepalese dentists from October, 2020 to December, 2020 by convenience sampling method. Data collection was done with the help of a proforma that included socio-demographic details and predesigned questionnaire adopted from a study done in Mumbai, India.13 The questions were developed in google form and shared to the study participants through various social media for the study duration of 3 months. Results: Out of 267 participants, 142 (53.2%) were BDS, 107 (40.1%) were MDS and remaining had other degrees. Of the total participants, only 83 (31.1%) placed dental implants in their practice. Those who did not place dental implants referred the case mostly to periodontist (51.1%), followed by prosthodontist (34.8%). Only 72 (26.9%) had undergone formal implant training program. All the study participants prescribed radiograph as CBCT alone or in combination with the other radiographs. Most of the participants, who placed dental implant, did both the surgical and the prosthodontic phases. Bone level implants (74.7%), Screw retained (50.6%) and extra oral fixation (50.6%) type prosthetics were used by most of the participants. Most frequently used implant systems were Bredent (46.9%), Nobel Biocare (46.9%) and Straumann (46.9%) followed by Adin (44.5%). Conclusion: The current study showed that dental implants practice is adopted by less than one third of the dentists in Nepal, that suggests the need for implementation of Continuing Professional Development in dental implants in Nepal to increase the knowledge and skills among dental professionals.

Стилі APA, Harvard, Vancouver, ISO та ін.

Oza, Unnati, Hiral Parikh, Shilpa Duseja, and Charu Agrawal. "Dental Implant Biomaterials: A Comprehensive Review." International Journal of Dentistry Research 5, no. 2 (August 25, 2020): 87–92. http://dx.doi.org/10.31254/dentistry.2020.5212.

Повний текст джерела

Анотація:

For the replacement of missing teeth, Dental implants have now gained popularity as one of the most significant treatment modality. In an attempt to boost the success rate of this root imitating structure, continuous efforts have been made to modify its materials and designs. To establish healthy osseointegration, biomaterials, designs and surface characteristics of implants play a key role. So, modification in these factors will aid in obtaining long-term implant stability. A wide variety of materials are available in the market and the selection of appropriate implant material is utmost important for accomplishment of successful treatment. Before choosing an implant, the clinicians should have detailed knowledge about the latest implant materials, its design aspects as well as its properties to achieve successful treatment outcome.

Стилі APA, Harvard, Vancouver, ISO та ін.

Dhami, Bhageshwar, Priti Shrestha, Bikash Lamichhane, Anuj Kumar Sharma, and Sujaya Gupta. "Dental Implants and General Dental Practitioners of Nepal: A study of existing knowledge and need for further education." Journal of College of Medical Sciences-Nepal 13, no. 1 (March 10, 2017): 212–15. http://dx.doi.org/10.3126/jcmsn.v13i1.16668.

Повний текст джерела

Анотація:

Background & Objectives: The use of dental implants in partially or completely edentulous patients has proved effective and an accepted treatment modality with predictable long-term success. Dental implants are becoming a popular choice for replacing the missing teeth because of increased awareness about implants both in dentists and patients. The objective of the study was to assess the basic knowledge and education about dental implants among general dental practitioners (GDPs) of Nepal.Materials & Methods: A cross sectional questionnaire was carried out among 110 GDPs which consist of twenty questions that were divided into three categories; first with some basic knowledge in implant dentistry, second with clinical knowledge of dental implants and third with dental implant education and training.Results: Out of 110 GDPs, 72.7% had basic knowledge about implant dentistry and 65.5% were not aware about advance surgical procedures like sinus lift and guided bone regeneration. All the GDPs were positive regarding more training and education in dental implants and 95.5% of them would like to incorporate dental implant treatment in their practice in future. Conclusion: GDPs should have adequate knowledge and training of dental implants which can be incorporated at undergraduate or post doctoral level so that they are skilled to provide quality dental implant therapy to their patients confidently.

Стилі APA, Harvard, Vancouver, ISO та ін.

Shrestha, Suraksha, and Santosh Kumar Yadav. "Dentists’ knowledge and attitude in immediate implant loading protocol of dental implants- A cross-sectional survey." Asian Journal of Medical Sciences 12, no. 1 (January 1, 2021): 112–17. http://dx.doi.org/10.3126/ajms.v12i3.32208.

Повний текст джерела

Анотація:

Background: Dental implant therapy is still considered an evolving field in Nepal, with most dentists favoring implant placement following the delayed loading protocol (>3 months) even in the rehabilitation of missing anterior teeth. There is need to understand the clinical difference between immediate and delayed loading protocols of the dental implants. With advent of immediate loading protocol of dental implants, instant rehabilitation in addition to better esthetics and self-confidence can be obtained. Aims and Objectives: This study aims to evaluate the knowledge and attitude of general dentist towards immediate loading protocol of dental implants. Materials and Methods: A descriptive, cross sectional survey was conducted among Nepalese general dentists who have entered their clinical practice in private or government hospital regardless of their years of experience. A self-administered questionnaire adapted from some previous studies was framed and distributed with the primary objective to determine their knowledge and attitude towards immediate loading protocols of dental implants. Data collected were analyzed using the Statistical Packages for the Social Sciences version 22 (IBM Corp, Armonk, NY, USA). Results: Among the 250 participants included in this study, 94.8% of the respondents completely filled the questionnaire. Nearly 46.4% of participants had good knowledge on the procedure and advantages offered by the immediately loaded dental implants with provisional restorations, whereas 83.1% had negative reservations toward implant placement using the protocol. In addition, this study found a statistically significant association (p<0.05) between the knowledge and attitude of dental practitioners regarding the protocol. Conclusion: Although dental implants have changed the outlook of dentistry in the past few decades, there is slightly poor knowledge and significant negative attitude of dentists toward the immediate implant loading protocol. The general dentist are expected to increase their awareness about immediate loading with subsequent training on its use and viability so that proper information can be disseminated to the patients. This will help to increase the practice of immediate implant in indicated cases by implantologist with further benefit to patient’s time and esthetics.

Стилі APA, Harvard, Vancouver, ISO та ін.

Łomżyński, Łukasz, Elżbieta Mierzwińska-Nastalska, and Monika Kłodkowska-Dobrucka. "Dental implants in prosthetic dentistry: Evolution of implant dentistry." Prosthodontics 62, no. 4 (August 15, 2012): 244–51. http://dx.doi.org/10.5604/.1010886.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Annaldasula, Shweta V., and Chein Shee Antoinette Yen. "A comprehensive review of impression techniques in implant dentistry." International Journal of Dentistry Research 6, no. 1 (May 15, 2021): 16–23. http://dx.doi.org/10.31254/dentistry.2021.6106.

Повний текст джерела

Анотація:

Regardless of the demonstrable success of fixed appliances like implants for the replacements of missing natural teeth in partially and fully edentulous patients, countable hindrances still persist. A crucial role is played by impressions used in the fabrication of dental implants for the success, durability and outcome of the restoration. An impression is a three dimensional negative likeness of the future position of the implant in the oral cavity. In view of the absence of periodontal ligaments that serve as natural compensators of the slight but significant details of the impression surface, therefore, impressions in implants are very crucial for implant success. Taking this factor into consideration, the present review article emphasizes on the different types of impression techniques used in implant dentistry.

Стилі APA, Harvard, Vancouver, ISO та ін.

I Naser, Alyaa, and Rayan S Hamed. "Treatment modalities for peri-implantitis: A review of literature." Edorium Journal of Dentistry 8, no. 1 (2022): 1–9. http://dx.doi.org/10.5348/100043d01an2021ra.

Повний текст джерела

Анотація:

Introduction: Implant Dentistry was created to show reliable treatment approaches for restoring the oral cavity’s esthetic and function. However, while dental implants have a high long-term success rate, dental implants are exposed to mechanical or biological complications. Objective: The therapeutic approaches will be addressed in this review, which is the main objective of this study. Materials and Methods: Data sources: The PubMed/MEDLINE, SCOPUS, and Web of Science databases were used to conduct the literature search from June to September 2021. Study selection: Non-surgical and surgical peri-implantitis treatment modalities are the main themes of this study. Result: Implant dentistry was created to show reliable treatment approaches for restoring the oral cavity’s esthetic and function. However, while dental implants have a high long-term success rate, dental implants are exposed to mechanical or biological complications. Conclusion: Peri-implantitis appears to be a multifactorial disease including the patient’s host/microbe response, implant characteristics, soft tissue and the hard conditions surrounding the implant, and the dentist’s surgical and prosthetic part experience. Different treatment modalities are present today, all are used to treat peri-implantitis, such as surgery, laser therapy, and innovative treatments such as cold atmospheric pressure air plasma jet (CAPAJ), enamel matrix derivative, and PRF gel.

Стилі APA, Harvard, Vancouver, ISO та ін.

Salve, Apoorva, Salman Ansari, Deepti Gattani, Nupur Kar, and Prajakta Heda. "Ozone – A versatile therapy in implant dentistry." Journal of Global Oral Health 5 (January 6, 2023): 124–27. http://dx.doi.org/10.25259/jgoh_5_2022.

Повний текст джерела

Анотація:

Oral cavity is an open ecosystem for many microorganisms making the oral environment more prone to bacterial colonization. Several studies have indicated that accumulation of bacteria on implant surface is a primary etiology for inflammatory conditions around implants, apparently leading to peri-implant diseases. Peri-implantitis is an inflammatory process that affects the tissues around an osseointegrated implant in function, resulting in the loss of the supporting bone. Hence, proper decontamination and disinfection may aid in successful osseointegration of dental implants. Ozone (O3) is a triatomic molecule, consisting of three oxygen atoms with a wide range of valuable properties which have been proven to be effective for applications in dentistry. O3 is a powerful oxidative agent with bactericidal, virucidal, and fungicidal properties. It can be used in gaseous, liquid (water/soil), or nanoparticle form as an adjunctive therapy in the management of peri-implant diseases and to decontaminate the implant surfaces. The application of ozone therapy is a novel approach in implant dentistry with limited literature. Therefore, the objective of the present review is to assess the impact of ozone therapy on the dental implant procedures and peri-implant diseases.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hanif, Ayesha, Saima Qureshi, Zeeshan Sheikh, and Haroon Rashid. "Complications in implant dentistry." European Journal of Dentistry 11, no. 01 (January 2017): 135–40. http://dx.doi.org/10.4103/ejd.ejd_340_16.

Повний текст джерела

Анотація:

ABSTRACTAfter tooth loss, an individual may seek tooth replacement so that his/her function and esthetics could be restored. Clinical prosthodontics, during the past decade, has significantly improved and developed according to the advancements in the science and patient's demands and needs. Conventional options in prosthodontics for substituting a missing single tooth include the removable partial denture, partial and full coverage bridgework, and resin-bonded bridgework. Dental implants have gained increasing popularity over the years as they are capable of restoring the function to near normal in both partial and completely edentulous arches. With substantial evidence available, fixed implant-supported prosthesis are fully acknowledged as a reliable treatment option for the replacement of single or multiple missing teeth nowadays. While dental implants are increasingly becoming the choice of replacement for missing teeth, the impediments associated with them are progressively emerging too.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Dentistry; implant dentistry; dental implant"

Hjalmarsson, Lars. "On cobalt-chrome frameworks in implant dentistry /." Göteborg : Department of Dentistry/Dental Materials Science, Institute of Odontology, 2009. http://hdl.handle.net/2077/21179.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

O'Sullivan, Dominic. "The effect of implant geometry upon the primary stability of dental implants." Thesis, University of Bristol, 2001. http://hdl.handle.net/1983/339010c1-63ee-4eb9-b03c-b3a2b9b89dbf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wanat, Thomas Nelson III. "Risk factors for dental implant failure| Smoking, periodontal disease and previously failed implant sites." Thesis, University of Colorado at Denver, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=10130885.

Повний текст джерела

Анотація:

Background: The literature indicates a reduced survival rate for dental implants placed at previously failed sites, smokers, and patients with a history of periodontal disease. The aim of this study is to review the available literature reporting on the success and/or survival of rough surface implants placed at previously failed sites, in smokers, and in periodontally compromised patients. An attempt was made to systematically review the literature and calculate an overall weighted mean survival rate for rough surface implants in each of the above three scenarios.

Methods: An electronic literature search (MEDLINE-PubMed) was performed and references hand-searched for human studies addressing the success/survival of implants placed at previously failed sites, in smokers and in patients with a history of chronic periodontal disease. The overall weighted mean survival rates and 95% confidence interval were then calculated. Results: Six retrospective studies reporting on implants placed at previously failed sites were included with total of 343 second attempts and 31 third attempts at implant placement at failed sites in 330 patients. The weighted mean survival rates for the second and third attempts at implant placement in a previously failed site were calculated to be 88.05% and 74.19%, respectively. A total of 14,395 implants were included in smoking analysis. Of these, 10,403 implants were placed in non-smokers with 250 failures and 3,992 placed in smokers, with 205 failures. The calculated overall weighted mean implant-level survival was 97.67% in non-smokers and 95.03% for in smokers. Lastly, six studies reported on 591 implants placed in periodontally compromised patients with a total of 15 failures and 198 implants placed in periodontally healthy patients with just one failure. The overall weighted mean implant survival rate was calculated to be 97.48% in periodontally compromised patients compared to 99.49% for periodontally healthy patients.

Conclusions: Of the three risk factors evaluated in this review, rough surface implants placed in previously failed sites presents the highest risk for implant failure. Rough surface implant survival declines significantly for each additional attempt at implant placement at a previously failed site, with weighted mean survival rates of 88.05% and 74.19% for the second and third attempts, respectively. Although more favorable than previously used implant designs, smokers continue to experience lower survival rates compared to non-smokers, with overall weighted mean implant survival rates of 95.03% and 97.67%, respectively. A similar finding was found for implants placed in patients with a history of chronic periodontitis. The calculated weighted mean survival rate was 99.49% for periodontally healthy patients compared to 97.48% for periodontally compromised patients.

Стилі APA, Harvard, Vancouver, ISO та ін.

Isaksson, Anders, and Michael Graham. "RoDent : Robotic Dentistry : Computer aided dental implant positioning system." Thesis, Halmstad University, School of Information Science, Computer and Electrical Engineering (IDE), 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-1559.

Повний текст джерела

Анотація:

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides.

The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

A new mouthpiece was designed comprising of a solid cube which could be clearly seen on the x-ray. Linearisation of the cube faces is used to find a reference point from which to drive a 5 axis drilling platform. The mouthpiece is placed in the drill platform which is driven by stepper motors which in turn are controlled by a microcontroller. Co-ordinates are entered via a PC interface. The PC software then translates these co-ordinates into motor steps which are sent to the microcontroller. The drill platform then positions the mouthpiece in order to drill guide holes for the dental implants.

The study showed that the machine design gave an acceptable degree of accuracy and repeatability. Further enhancements could be made by automating the detection of the cube using image analysis techniques. The study was also limited by the lack of graphical and geometrical data concerning the position of the implant. For the purpose of this study the co-ordinates for the implants guides is entered by hand.

It was concluded that further software and hardware enhancement would be needed before the application could be developed commercially.

Стилі APA, Harvard, Vancouver, ISO та ін.

Al-Noaman, Ahmed. "Novel bioactive glass coating for dental implant." Thesis, Queen Mary, University of London, 2012. http://qmro.qmul.ac.uk/xmlui/handle/123456789/3342.

Повний текст джерела

Анотація:

With an increasingly ageing population the requirement for titanium implants will grow. A major challenge is to speed up the rate and strength of osseo-integration. Bioactive glass coated titanium is postulated to improve bone-bonding ability of titanium. However, bioactive glasses have a higher thermal expansion coefficient (TEC) than titanium and are more prone to crystallization during coating process. Therefore, the aim was to develop a bioactive glass coating that matches the TEC of titanium does not crystallize during coating process and forms surface apatite in vivo and in vitro. To achieve these qualities certain compounds (MgO, CaF2 and MgF2 and fluorapatite (FA) crystals) were substituted or added to the glass composition. The glasses were prepared using melt-derived route. The ground glasses were sieved to obtain less than 45 μm diameter glass particles and this powder characterised using X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Glass rods were cast to measure TEC, glass transition temperature (Tg) and softening temperature (Ts) using Dilatometry. Glass structure was investigated by measuring glass density and oxygen density. The apatite-forming ability of the glass powder was assessed in both Tris-buffer and simulated body fluid (SBF). Filtrates were analysed by inductively coupled plasma spectroscopy (ICP). Titanium disks were coated with bioactive glass/composites using the enamelling technique. Coated samples were characterised by (XRD, FTIR) and scanning electron microscopy (SEM-EDS). Bioactivity of coating samples was studied after 1 month immersion in Tris-buffer solution or SBF. Biocompatibility assays of glass coatings were assessed using UMR106 osteoblast-like cells and a fibroblast cell line. The results generated some interesting findings – firstly it is possible to produce glasses with comparable TEC of titanium and wide sintering windows. Although most preparations were more bioactive compared with those of Saiz and Tomsia–not all preparations were bioactive. Some coatings were biocompatible with fibroblasts, but not osteoblast-like cells. Whilst some glasses might not be suitable for a coating, they may have use as structural scaffolds for skeletal reconstruction.

Стилі APA, Harvard, Vancouver, ISO та ін.

Alzoubi, Fawaz. "Pre-doctoral implant dentistry education: Trends, issues, and perspectives." Scholarly Commons, 2015. https://scholarlycommons.pacific.edu/uop_etds/46.

Повний текст джерела

Анотація:

Implant dentistry has emerged as a very reliable and predictable option for replacing missing teeth. Implant education at the pre-doctoral level has been implemented in most parts of the world and is currently perceived as a fundamental discipline in dental education. Dental graduates today are expected to have knowledge and possess skills at the competence level in order to provide care for the growing number of patients seeking this treatment option, which may be the optimal option for the majority of their cases. However, very little is known about current trends, issues, and perspectives of implant dentistry education. This study builds a knowledge base about implant dentistry education in pre-doctoral dental education programs. It begins with an overview of the current state of implant dentistry education described in Chapter 1. Chapter 2 evaluates faculty perception in Kuwait University Faculty of Dentistry regarding case-based-learning, a pedagogy that has been recommended by multiple dental education institutions as the context within which pre-doctoral implant dentistry education should be taught. Chapter 3 presents an example of how case-based-learning pedagogy might be implemented in the form of a case report. Chapter 4 creates the link between faculty perception and student outcomes and presents an evaluation of students' competence level regarding pre-doctoral implant education. Finally, Chapter 5 provides a summary and synthesis of the three articles with a focus on placing this research within the larger body of scholarship on implant education and on identifying implications for policy, future scholarship, and practice.

Стилі APA, Harvard, Vancouver, ISO та ін.

Abuhammoud, Salahaldeen Mohammad. "Knowledge and practice of implant dentistry among University of Iowa College of Dentistry alumni." Thesis, University of Iowa, 2018. https://ir.uiowa.edu/etd/3235.

Повний текст джерела

Анотація:

Objective: The objective of this study was to measure and assess the implant education received by graduates from the University of Iowa College of Dentistry and Dental Clinics. This study measured the self-reported competency levels of dental practitioners with regards to providing and maintaining dental implants as treatment modalities to their patients. The study assessed dental graduates’ willingness to practice and perform dental implant procedures, including both surgical and prosthetic treatments. Additionally, the study identifies challenges that face practicing dentists treating patients with dental implants and identifies the preferred way practitioners seek future training after completing dental school. Methods: A 36-item electronic survey was created and distributed to 737 dentists who graduated from the University of Iowa College of Dentistry and Dental Clinics. Dentists’ demographics, practice characteristics, and detailed self-reported competency in implant dentistry were collected. Statistical analysis of the responses consisted of descriptive statistics and bivariate analysis, and nonparametric Wilcoxon rank-sum test and Spearman’s rank correlation test along with a chi-square test were used for detecting the differences, correlations and associations under different conditions. Results: 154 dentists completed the survey (21% response rate), while only 143 subjects who fulfilled the inclusion criteria were included for the statistical analysis. The survey consisted mostly of males (56.6%). The mean age of respondents was 34.2 years old with a mean practice time of 6.2 years. Of the responding dentists, 21.7% completed a postgraduate training program and 51% of the respondents were in group practice. 66% of the respondents practice in the Midwest region of the US and 71.3% of the respondents took continuing educational courses in implant dentistry and the mean cumulative hours of CE courses in implant dentistry was 33.8 hours. The mean average of implant restorations provided per year was 11.7 and the mean average of implant placements per year was 19.6. There was a significant correlation between cumulative hours of Continuing Education courses and number of implant units on average placed or restored. 64.3% of the dentists are not satisfied with the implant education given at the dental student level. 95.8% of the dentists reported that dental school training is not adequate to surgically place dental implants in their practice. Only 32.4% reported that dental school training was not adequate to restore dental implants in their practice. The preferred way to receive additional training about dental implants is short-term CE courses and workshop courses conducted by implant companies. 23.6% of the dentists reported they are competent at surgically placing dental implants in their practice. 79.1% reported they are competent at restoring dental implants in the dental office. Only 28.4% reported that they feel dental implants are more difficult than other dental treatments. Conclusions: Graduate dentists from the University of Iowa are not expected to be competent in all components of implant dentistry without further postgraduate training. Respondents stated that their dental school training in surgical placement of implants was inadequate. To build upon their dental school training, the two main preferred education pathways as reported by respondents were short-term continuing education courses and workshops courses conducted by implant companies. Within the parameters of this study, we can conclude the following: 1.Age, GPA, number of CE hours in dental implant therapy, specialty status, and time since graduation did not influence undergraduate education satisfaction in dental implant therapy. 2.There is a positive correlation between the number of CE course hours and the number of implant units restored or placed by general dentists. 3.Male dentists, those who practice in group practice settings, and those who have graduated six or more years ago reported a greater number of CE course hours in dental implant therapy. 4.Those who graduated with GPAs less than or equal to 3.4, general dentists, and those who enrolled in a high number of CE courses were more confident in restoring dental implants. 5.Those who graduated with a GPA greater than or equal to 3.5, specialist dentists, and those who enrolled in a high number of CE courses were more confident in surgically placing dental implants. 6.Males, general dentists, those who practice in a group practice setting, and those who graduated six years or more ago restored more implants on average per year. 7.Males, specialist dentists, those who practice outside the Midwest US, and those who graduated six years or more ago surgically place more implants on average per year.

Стилі APA, Harvard, Vancouver, ISO та ін.

Harrison, Kevin Charles. "Implant Placement in Conjunction with the Ridge Split Technique." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306864728.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Narendrakumar, Krunal. "Developing methods to prevent or treat microbial colonisation of titanium dental implant surfaces." Thesis, University of Birmingham, 2015. http://etheses.bham.ac.uk//id/eprint/5677/.

Повний текст джерела

Анотація:

Titanium (Ti) dental implants are a successful treatment modality to replace missing teeth. Success is traditionally defined as the retention of the Ti dental implant but fails to account for peri-implant inflammatory diseases such as peri-implant mucositis and peri-implantitis. Peri-implant diseases are caused by the formation of pathogenic bacteria biofilms on the implant surface and disease progression can lead to dysfunctional and unaesthetic outcomes. There is no universally accepted treatment or management protocol for peri-implant disease. The objectives were to develop methods to prevent bacterial adhesion to Ti implant surfaces or treat existing biofilms. The relationship between bacterial adhesion of common early coloniser bacteria and topological features on dental implant surfaces was studied. Reproducible model systems were identified to be used in studies of biofilm formation and disruption. Early bacterial adhesion was investigated on engineered Ti surfaces created using Scanning-Laser-Melting or on Ti nanotubule surfaces. Photoactivation of Ti oxide films was investigated on thermally or anodically oxidised Ti and demonstrated the potential to pre-treat implant surfaces to reduce bacterial attachment. Finally chemical disinfection of Ti surfaces with a novel Eucalyptus Oil (EO) based formulation was demonstrated to increase the permeation of bactericidal agents into immature biofilms formed on Ti surfaces.

Стилі APA, Harvard, Vancouver, ISO та ін.

AL-Meraikhi, Hadi Nasser. "In Vitro Fit and Distortion of CAD/CAM-Fabricated Implant-Fixed Titanium and Zirconia Complete Dental Prostheses Frameworks." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1449063197.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Dentistry; implant dentistry; dental implant"

Misch, Carl E. Contemporary implant dentistry. 3rd ed. St. Louis, MO: Mosby Elsevier, Inc., 2008.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Misch, Carl E. Contemporary implant dentistry. 2nd ed. St. Louis: Mosby, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Misch, Carl E. Contemporary implant dentistry. 2nd ed. St. Louis: Mosby, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

K, Garg Arun. Implant dentistry: A practical approach. 2nd ed. Maryland Heights, Mo: Mosby/Elsevier, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Implant dentistry: A practical approach. 2nd ed. Maryland Heights, Mo: Mosby/Elsevier, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Abd El Salam El Askary. Fundamentals of esthetic implant dentistry. Ames, Iowa: Blackwell Munksgaard, 2007.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Malet, Jacques. Implant dentistry at-a-glance. Chichester, West Sussex, UK: Wiley-Blackwell, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rutten, Luc. Implant aesthetics. Fuchstal: teamwork media, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jan, Lindhe, Karring Thorkild, and Lang Niklaus Peter, eds. Clinical periodontology and implant dentistry. 4th ed. Oxford, UK: Blackwell Munksgaard, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lazarof, Sargon. The immediate load implant system: Esthetic implant dentistry for the 21st century. Chicago: Quintessence, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Dentistry; implant dentistry; dental implant"

Praveena, Channamsetty, Ramesh S. Chaughule, and K. V. Satyanarayana. "Nanotechnology in Implant Dentistry." In Advances in Dental Implantology using Nanomaterials and Allied Technology Applications, 1–23. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52207-0_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Miglani, Sanjay, and Swadheena Patro. "Lasers in Implant Dentistry." In Advances in Dental Implantology using Nanomaterials and Allied Technology Applications, 225–45. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52207-0_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ebenezer, Supriya, Vinay V. Kumar, and Andreas Thor. "Basics of Dental Implantology for the Oral Surgeon." In Oral and Maxillofacial Surgery for the Clinician, 385–405. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-1346-6_18.

Повний текст джерела

Анотація:

AbstractOver the past decades, implant dentistry has evolved to be a very predictable treatment modality for the replacement of lost teeth and has now become one of the most common oral surgical procedures carried out worldwide. This chapter introduces the history and evolution of dental implants, discusses the concept of osseointegration, mentions the types of implants and discusses clinical decision making and execution of straight forward implant placement. It must be noted that the field of implantology is rapidly developing with new treatment concepts and increasing use of digital technology. The surgical part of implant treatment although extremely important, is only a part of the overall treatment, the other important factors being the laboratory and prosthodontics. This chapter only provides a basic surgical overview of implantology for the beginner surgeon clinician.

Стилі APA, Harvard, Vancouver, ISO та ін.

Attar, Obadah. "Endodontic Microsurgery or Dental Implants?" In Practical Osseous Surgery in Periodontics and Implant Dentistry, 227–45. West Sussex, UK: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118785652.ch17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pirih, Flavia Q., and Paulo M. Camargo. "Dental Implant Site Development with Particulate Bone Grafts and Guided Bone Regeneration." In Vertical Alveolar Ridge Augmentation in Implant dentistry : A Surgical Manual, 79–92. Hoboken, New Jersey: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119082835.ch09.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Surathu, Nitish, Ali Tunkiwala, and Udatta Kher. "Dental Implants and Digitization." In Digitization in Dentistry, 335–71. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65169-5_12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gibreel, Sara, Hasaan Gassim Mohamed, Amartya Raj Suraj, and Sukumaran Anil. "Osseointegration of Dental Implants and Osteoporosis." In Dentistry. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.100270.

Повний текст джерела

Анотація:

Osteoporosis is a disease characterized by low bone mass and microarchitectural deterioration of bone tissue, leading to enhanced bone fragility and susceptibility to fractures. Osteoporosis also results in loss of bone mineral density throughout the body, including the maxilla and mandible. Successful osseointegration of dental implants is attributed to their ability to integrate well with bone. The influence of bone quality on dental implant osseointegration has been discussed in several studies, and higher rates of dental implant failure have been reported in patients with low bone quality and an inadequate bone volume. Osteoporosis represents a risk factor for osseointegration, and this relationship may be derived from the association of the disease with a deficiency in bone formation. This condition would compromise the healing capacity and the apposition of bone at the implant interface. Currently, there is no clear consensus regarding dental implant treatment in osteoporotic individuals. Studies have revealed contradictory reports regarding the success and failure of dental implants in patients with osteoporosis. Antiresorptive agents have been widely used to treat osteoporosis. Dental implant placement in patients on bisphosphonate therapy may trigger osteonecrosis of the bone. Hence, it is important to analyze factors that have to be taken into consideration prior to implant therapy in patients with osteoporosis and those undergoing treatment. This chapter outlines dental implant osseointegration under osteoporotic conditions. The possible effect of bisphosphonate therapy on dental implant survival will also be discussed based on the current literature.

Стилі APA, Harvard, Vancouver, ISO та ін.

"Restorative dentistry 5: dental implants." In Oxford Handbook of Clinical Dentistry, edited by Bethany Rushworth and Anastasios Kanatas, 361–75. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198832171.003.0009.

Повний текст джерела

Анотація:

Single or multiple dental implants have become a well-accepted method of replacement of missing teeth and their supporting structures. This chapter introduces implantology, with an explanation of the history of dental implants and a discussion regarding the need to replace missing teeth. The key aspects of treatment planning for implants are outlined including assessment of suitability for implant placement, indications, and contraindications. Available implant types are outlined and the risks of implant placement such as failure to osseointegrate, gingival recession, and nerve damage are considered. Basic surgical techniques for implant placement are described including an explanation of healing and integration times. The chapter includes provision, follow-up, and maintenance advice regarding restoration of the dental implant.

Стилі APA, Harvard, Vancouver, ISO та ін.

Gupta, Gaurav. "Implant Stability Quotient (ISQ): A Reliable Guide for Implant Treatment." In Dentistry. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.101359.

Повний текст джерела

Анотація:

Implant stability is a prerequisite for successful dental implants and osseointegration. To determine the status of implant stability, continuous monitoring in an objective and qualitative manner is important. To measure implant stability two different stages are there: Primary and secondary. Primary implant stability at placement is a mechanical phenomenon that is related to the local bone quality and quantity, the type of implant and placement technique used. Primary stability is checked from mechanical engagement with cortical bone. Secondary stability is developed from regeneration and remodeling of the bone and tissue around the implant after insertion and affected by the primary stability, bone formation and remodeling. Implant stability is essential for the time of functional loading. Classical benchmark methods to measure implant stability were radiographs or microscopic analysis, removal torque, push-through and pull-through but due to lack of feasibility, time consumption and ethical reasons other methods have been propounded over period of time like measurement of implant torque, model analysis and most important ISQ which has the ability to monitor osseointegration and the life expectancy of an implant. ISQ is a valuable diagnostic and clinical tool that has far-reaching consequences on implant dentistry and this article throws light on advanced and reliable methods of assessing ISQ.

Стилі APA, Harvard, Vancouver, ISO та ін.

Sridevi, Gopathy, and Seshadri Srividya. "Novel Dental Implants with Herbal Composites: A Review." In Dentistry. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.101489.

Повний текст джерела

Анотація:

Missing a permanent tooth is a miserable condition faced by a common man. A tooth decay, periodontitis, mechanical trauma, or any systemic complications lead to such a complication. These bone defects when left untreated lead to severe resorption of the alveolar bone. A proper dental filling with an appropriate bone substitute material could prevent such resorption and paves a way for subsequent implant placement. Dental implants are considered as the prime option by dentists to replace a single tooth or prevent bone resorption. A variety of bone substitutes are available differ in origin, consistency, particle size, porosity, and resorption characteristics. Herbal composites in dentistry fabricated using biphospho-calcium phosphate, casein, chitosan, and certain herbal extracts of Cassia occidentalis, Terminalia arjuna bark, Myristica fragans also were reported to possess a higher ossification property, osteogenic property and were able to repair bone defects. C. occidentalis was reported to stimulate mineralization of the bone and osteoblastic differentiation through the activation of the PI3K-Akt/MAPKs pathway in MC3T3-E1 cells of mice. This implant proved better osteoconductivity and bioactivity compared to pure HAP and other BCP ratios. Terminalia Arjuna was also worked in the incorporation in the graft to enhance the osteogenic property of the implant and gave good results. Another implant bone graft was synthesized containing BCP, biocompatible casein, and the extracts of Myristica fragans and subjected to in vitro investigations and the results revealed the deposition of apatite on the graft after immersing in SBF and also the ALP activity was high when treated with MG-63 cells, NIH-3 T3, and Saos 2 cell lines. This study indicates that the inclusion of plant extract enhances the osteogenic property of the graft. Thus, these novel dental implants incorporated with herbal composites evaluated by researchers revealed an enhanced bone healing, accelerates osseointegration, inhibits osteopenia, and inhibits inflammation. This application of herbal composite inclusion in dentistry and its applications has a greater potential to improve the success rate of dental implants and allows the implications of biotechnology in implant dentistry.

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Dentistry; implant dentistry; dental implant"

Setiawan. "Dental Implant Placement With Horizontal Bone Augmentationand Space Regainer Using Partial Orthodontic Fix Appliance." In The 7th International Meeting and The 4th Joint Scientific Meeting in Dentistry. SCITEPRESS - Science and Technology Publications, 2017. http://dx.doi.org/10.5220/0007296602810284.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hasan, Md Abu, and Panos S. Shiakolas. "3D Finite Element Stress Analysis of an Implant Supported Overdenture Under Bruxism and Lingualized Loading Conditions." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-51688.

Повний текст джерела

Анотація:

Bruxism is a nonfunctional motor activity that is characterized by grinding and clenching of the teeth. It has been postulated that bruxism causes excessive occlusal load on the dental implant and its superstructures leading to biological and biomechanical complications. While many researchers suggest that grinding/clenching causes early implant complications and accelerated bone loss, others indicate that the long term effects are still unclear. The goal of this study is to analyze the effect of bruxism loading condition on the stress distribution of an implant supported overdenture (ISO) using finite element analysis (FEA) and compare the results with one of the most functionally efficient occlusion schemes in the clinical dentistry — lingualized occlusion. A high fidelity solid model of a mandibular denture encompassing lingual and buccal cusps, mesial and distal fossae supported by four implants and a connecting titanium prosthetic bar, resting on alveolar bone were modeled in SolidWorks 2013 following proper clinical guidelines and imported to ANSYS 15.0 for stress analysis. The results of the study demonstrate that the stress distribution in the implant prostheses and surrounding bone is significantly affected due to bruxism as compared to the lingualized loading. While the location of the maximum stress concentration was the same (neck of the posterior implants) for both loading conditions, there was an increase of approximately 115% von-Mises stress for bruxism loading condition as compared to the lingualized occlusion. The maximum principal stress in the cortical bone surpassed the ultimate tensile strength limit of the jaw bone implying possibility of bone resorption in the peri-implant area.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hsieh, Y. Sh, J. Z. Chen, Ch S. Chen, S. Y. Lee, and M. Ch Pan. "Bone Defect Detection on Dental Osseointegration Using Structural Mode Shape." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-70508.

Повний текст джерела

Анотація:

This study aims to assess clinical bone defects between an implant and jaw bone after dental implantation by examining the mode shape of structures. Different severity of bone defects was evaluated through structure resonant frequencies and their corresponding mode shapes of the implant and jaw bone by using both numerical analysis and experimentation. This study consists of two parts. First, the assumption of two kinds of boundary conditions, bonding and rubbing, was applied to simulate osseointegration in the clinical dentistry and the in-vitro bone defect model, respectively, in finite element analysis. Natural frequencies and their mode shapes of the implant/jaw were computed by the modal analysis. During the harmonic analysis, the response displacements versus frequency of implant in the buccolingual and mesiodistal directions were defined. Secondly, the structural resonant frequencies were measured by a procedure of acoustic excitation and displacement response, and then this result was compared with using the detection of an Osstell mentor. The simulation results show that the structure local mode corresponding high-frequency resonance can be used to examine bone imperfection remarkably. Limited by extremely tiny response displacement, measuring dynamic range of the capacitive displacement sensor, the acoustic excitation-displacement response measurement can only acquire the structure global mode of the mandible corresponding to low-frequency resonance. Additionally, the Osstell mentor can assess bone defects effectively. Therefore, the above-mentioned simulations and experimental results prove that the local mode is promising to evaluate the defect severity of the dental-implantation osseointegration.

Стилі APA, Harvard, Vancouver, ISO та ін.

Tallita Passos, Bianka, Moira Cristina Cubas Fatiga Tillmann, and Anita Maria da Rocha Fernandes. "Plataforma para apoio a modelagem de próteses com base em Processamento Digital de Imagens e Deep Learning." In Computer on the Beach. São José: Universidade do Vale do Itajaí, 2021. http://dx.doi.org/10.14210/cotb.v12.p525-527.

Повний текст джерела

Анотація:

Medical practice in general, and dentistry in particular, generatesdata sources, such as high-resolution medical images and electronicmedical records. Digital image processing algorithms takeadvantage of the datasets, enabling the development of dental applicationssuch as tooth, caries, crown, prosthetic, dental implant, andendodontic treatment detection, as well as image classification. Thegoal of image classification is to comprehend it as a whole and classifythe image by assigning it to a specific label. This work presentsthe proposal of a tool that helps the dental prosthesis specialist toexchange information with the laboratory. The proposed solutionuses deep learning to classify image, in order to improve the understandingof the structure required for modeling the prosthesis. Theimage database used has a total of 1215 images. Of these, 60 wereseparated for testing. The prototype achieved 98.33% accuracy.

Стилі APA, Harvard, Vancouver, ISO та ін.

Barone, Sandro, Alessandro Paoli, and Armando V. Razionale. "Three-Dimensional Tooth Segmentation by Integrating Multiple Ray-Sum Images From CBCT Data." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-47197.

Повний текст джерела

Анотація:

The reconstruction of tooth anatomies is of utmost importance when dental implant surgeries and/or orthodontic corrections must be planned. In the last few years, cone beam CT (CBCT) has gained popularity in dentistry for 3D imaging of jawbones and teeth. However, within CBCT data sets, each tooth is defined by a region, which cannot be easily separated from surrounding tissues (i.e., bone tissue) by only considering pixel’s grey-intensity values. For this reason, some enhancement is usually necessary in order to properly segment tooth geometries. In this paper, a semi-automatic approach to reconstruct individual 3D tooth anatomies by processing CBCT-scan data is presented. The methodology is based on the creation of a minimal number of 2D “local ray-sum” images by adding the absorption values of adjacent voxels along the most significant views for each tooth. The knowledge of the specific anatomical patient morphology drives the selection of these significant projection directions. The reconstructed “ray-sum” images greatly enhance the clearness of the root contours, which can then be interactively traced by dentists. A set of meaningful 2D tooth contours is consequently obtained and used to automatically extract a cubic spline curve for each transverse slice, thus approximating the overall 3D tooth profile. The effectiveness of the methodology has been evaluated by comparing the results obtained for the reconstruction of anterior teeth with those obtained by using classical segmentation tools provided within commercial software.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ackerl, Norbert, Johannes Gysel, Maximilian G. Warhanek, and Konrad Wegener. "Ultra-short pulsed laser manufacturing of yttria stabilized alumina-toughened zirconia dental implants." In Lasers in Dentistry XXV, edited by Peter Rechmann and Daniel Fried. SPIE, 2019. http://dx.doi.org/10.1117/12.2507495.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tsuda, Tadamasu, and Koukichi Matsumoto. "Scanning electron microscope findings of the lased implant surface." In Advanced Laser Dentistry, edited by Gregory B. Altshuler, Richard J. Blankenau, and Harvey A. Wigdor. SPIE, 1995. http://dx.doi.org/10.1117/12.207044.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Putriyanti, Faradina, Yuniarti Soeroso, and Hari Sunarto. "Clinical Evaluation of Dental Implants Performed in the Universitas Indonesia Dental Training Hospital Periodontal Clinic from 2009 to 2014." In 11th International Dentistry Scientific Meeting (IDSM 2017). Paris, France: Atlantis Press, 2018. http://dx.doi.org/10.2991/idsm-17.2018.10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Papa, Steve, Mathieu Maalouf, Alain Abou Khalil, Xxx Sedao, Pierre Claudel, Nicolas Compère, Alain Guignandon, and Virginie Dumas. "Femtosecond lasers structured titanium implant in regulating bacteria and bone stem cell adhesion." In Lasers in Dentistry XXVIII, edited by Peter Rechmann and Daniel Fried. SPIE, 2022. http://dx.doi.org/10.1117/12.2606622.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Djurovic Koprivica, Daniela, Tatjana Puskar, Milica Jeremic Knezevic, Bojana Milekic, Aleksandra Maletin, and Jovana Laban Terzija. "Materials for taking impressions in implant prosthetic dentistry." In RAD Conference. RAD Centre, 2021. http://dx.doi.org/10.21175/rad.abstr.book.2021.6.9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Dentistry; implant dentistry; dental implant"

SAINI, RAVINDER, AbdulKhaliq Alshadid, and Lujain Aldosari. Investigation on the application of artificial intelligence in prosthodontics. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, December 2022. http://dx.doi.org/10.37766/inplasy2022.12.0096.

Повний текст джерела

Анотація:

Review question / Objective: 1. Which artificial intelligence techniques are practiced in dentistry? 2. How AI is improving the diagnosis, clinical decision making, and outcome of dental treatment? 3. What are the current clinical applications and diagnostic performance of AI in the field of prosthodontics? Condition being studied: Procedures for desktop designing and fabrication Computer-aided design (CAD/CAM) in particular have made their way into routine healthcare and laboratory practice.Based on flat imagery, artificial intelligence may also be utilized to forecast the debonding of dental repairs. Dental arches in detachable prosthodontics may be categorized using Convolutional neural networks (CNN). By properly positioning the teeth, machine learning in CAD/CAM software can reestablish healthy inter-maxillary connections. AI may assist with accurate color matching in challenging cosmetic scenarios that include a single central incisor or many front teeth. Intraoral detectors can identify implant placements in implant prosthodontics and instantly input them into CAD software. The design and execution of dental implants could potentially be improved by utilizing AI.

Стилі APA, Harvard, Vancouver, ISO та ін.

AlBakri, Aref, Auswaf Ahsan, Manoj Vengal, KR Ashir, Abdul Majeed, and Hanan Siddiq. Antibiotic Prophylaxis before Invasive Dental Procedures for Patients at High-Risk of Infective Endocarditis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, July 2022. http://dx.doi.org/10.37766/inplasy2022.7.0011.

Повний текст джерела

Анотація:

Review question / Objective: The aim of the present systematic review and meta-analysis is to determine whether there is a genuine clinical need for Antibiotic Prophylaxis(AP) for the prevention of Infective Endocarditis(IE) in high-risk individuals (particularly those with demonstrable structural heart diseases or valve surgery) undergoing invasive dental procedures. Information sources: PubMed, Science Direct, British Dental Journal and Cochrane Register of Controlled Trials. Search terms used included various combinations of the following subject headings and title or abstract keywords – prophylactic antibiotics, antibiotic prophylaxis, antimicrobial, dentist, extraction, implant, infective endocarditis, or bacterial endocarditis.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!