Готові списки джерел за темами / Curing

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Curing"

Автор: Grafiati
Опубліковано: 4 червня 2021
Оновлено: 31 липня 2024

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Curing".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Curing"

1

Jeong, Jin-Hoon, and Dan G. Zollinger. "Development of Test Methodology and Model for Evaluation of Curing Effectiveness in Concrete Pavement Construction." Transportation Research Record: Journal of the Transportation Research Board 1861, no. 1 (January 2003): 17–25. http://dx.doi.org/10.3141/1861-03.

Повний текст джерела
Анотація:
Early-age moisture loss from the surface of a concrete pavement may induce undesirable effects that play a factor in long-term performance. Early-age detrimental behavior such as slab curling, warping, delamination, and even plastic shrinkage cracking are affected by the amount of evaporation and the effectiveness of the curing medium. The rate of evaporation is a key item in the monitoring of the quality of the curing. However, most approaches for this are largely empirical and are useful only under laboratory conditions. The effective curing thickness concept is introduced as a method to evaluate the effectiveness of a curing method. The surface relative humidity has the biggest influence on both the effective curing thickness and the rate of evaporation. Thus, prediction of the rate of evaporation of the water from concrete depends on the relative humidity of the surface and is important for evaluation of the curing method. Existing evaporation models, including the American Concrete Institute nomograph, were evaluated for their capabilities in predicting evaporation from curing concrete. Data from a series of laboratory experiments with a modified version of Penman’s evaporation model are also presented.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zhang, Zengping, Guozheng Liang, Changqing Fang, Jianzhong Pei, and Shuanfa Chen. "Curing octaepoxysilsesquioxane with different curing agents." Journal of Applied Polymer Science 125, no. 3 (January 20, 2012): 2281–88. http://dx.doi.org/10.1002/app.36452.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Hustin, J., and E. Jauniaux. "Curing the human embryo—curing the placenta." Human Reproduction 8, no. 11 (November 1993): 1966–82. http://dx.doi.org/10.1093/oxfordjournals.humrep.a137969.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Dalrymple, Theodore. "Curing Crime." Chesterton Review 35, no. 3 (2009): 780–81. http://dx.doi.org/10.5840/chesterton2009353/4113.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

MATSUYAMA, Akira. "Curing Catalyst." Journal of the Japan Society of Colour Material 66, no. 9 (1993): 561–70. http://dx.doi.org/10.4011/shikizai1937.66.561.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Silver, Sue. "Curing mediaphobia." Frontiers in Ecology and the Environment 1, no. 4 (May 2003): 171. http://dx.doi.org/10.1890/1540-9295(2003)001[0171:cm]2.0.co;2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Monsen, Rita Black. "Curing children." Journal of Pediatric Nursing 15, no. 4 (August 2000): 205–6. http://dx.doi.org/10.1053/jpdn.2000.9027.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

McFarland, Ernie. "Curing calculatoritis." Physics Teacher 24, no. 1 (January 1986): 34. http://dx.doi.org/10.1119/1.2341928.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Dalrymple, T. "Curing crime." BMJ 338, jun03 2 (June 3, 2009): b2240. http://dx.doi.org/10.1136/bmj.b2240.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Crainer, Stuart. "Curing healthcare." Business Strategy Review 18, no. 4 (December 2007): 75–79. http://dx.doi.org/10.1111/j.1467-8616.2007.00504.x.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Curing"

1

Tranter, Kenneth Shaun. "Remote cationic curing." Thesis, City University London, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.340378.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fredheim, Rasmus. "Infrared Curing of Glass Fiber Composite Tube : Optimization of the curing cycle." Thesis, Karlstads universitet, Avdelningen för maskin- och materialteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-85466.

Повний текст джерела
Анотація:
This thesis has investigated the possibility of optimizing curing time by changing the energy source from a conventional oven to infrared radiation (IR) and if it is possible to achieve similar results as the company's current production of glass fiber composite tubes.   Many different parameters (time, temperature, heating rate, and rotation speed) might influence a cured composite tube's properties. Reduced factorial experiments were conducted to test all these parameters cost-efficient where each parameter was tested at a high and low level. However, every possible combination was not investigated.   Temperature measurements during the curing cycles, energy calculations, three-point bending, and differential scanning calorimetry analysis were conducted to compare the two different curing methods, hot air and IR curing. The current production flexural strength and glass transition temperature (Tg) have acted as benchmark values that the tubes cured with IR would have to reach to be considered a reliable manufacturing method. Differential scanning calorimetry (DSC) analyses were conducted to measure the Tg and three-point bending to determine the flexural strength. Due to that no standard exist for three-point bending of composite tubes, an in-house method was created and verified with a finite element simulation in Abaqus, to measure the flexural strength. The simulated reaction force was circa 76.9% of the measured force at the same displacement during the three-point bending test of the tubes. The simulation found that the stress concentration did occur at the same locations as the fracture occurred in the three-point bending test.     The temperature difference between the top of the laminate and the core was close to zero degrees for the current production by hot air in a thermal oven. A more significant temperature difference between the core and top of the laminate was found during curing with IR. However, a higher rotation speed was found to create a more evenly temperature distribution in the composite.    No clear correlation between the Tg and the flexural strength was found, as the literature suggests while comparing each test cured with IR. Nevertheless, by comparing every test cured with IR with the current production of the tube, it was determined that a lower Tg could cause a lower flexural strength. However, the lower flexural strength for the tubes cured by IR could also be explained by the temperature difference found between the core temperature and the top of the laminate during the curing process.       The reduced factorial experiments showed that it was possible to reach similar properties by curing with IR and reducing the curing time by 69.3%. Time and the combination of time and temperature were found to affect the result when it comes to the glass transition temperature. Regarding flexural strength, no parameters were found to impact the outcome. By investigating the time and temperature further, the curing time could be reduced to 71.3% compared with the current production and still achieve similar properties. Nevertheless, the energy use for curing with IR was found to require 8.3 times more than the current production.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Wilkinson, Susan Anne. "Aspects of radiation curing." Thesis, City University London, 1989. http://openaccess.city.ac.uk/7720/.

Повний текст джерела
Анотація:
The electron beam induced polymerisation of dialkyltin diacrylates, as well as the UV and electron beam induced polymerisation of some novel silicon containing acrylates are discussed. The reactivity and film forming properties of these materials are compared with that of some commercial diluents such as, tripropyleneglycol diacrylate, TPGDA and trimethylolpropane triacrylate, TMPTA. Mechanistic studies concerning the initiation of free radical polymerisation of the acrylate ester, isodecylacrylate, IDA on electron beam irradiation are presented. Addition of electron and hole scavengers revealed that slow electrons contribute significantly to the initiation of electron beam induced polymerisation of acrylate esters. The film forming properties of phenyl acrylate and mono-, di- and tri- halophenyl acrylates on exposure to electron beam irradiation are evaluated in terms of their ability to produce tackfree films. The sensitivity of catechol diacrylate compared with t-butyl catechol diacrylate is also presented. Mechanistic studies concerning the initiation of both UV and electron beam induced cationic polymerisation of 3,4-epoxycyclohexylmethyl-31,41 -epoxycyclohexanecarboxylate, with the aid of diphenyliodonium hexafýuorophosphate, triphenylsulphonium hexafluorophosphate and (n -2,4-cyclopentadien- I-yl) [(I, 2,3,4,5,6-n) (-I-methylethyl) benzene] -iron(I+) hexafluorophosphate, as well as the radiolysis of 6,7-epoxy- 3,7-dimethyloctylacrylate in the presence of diphenyliodonium hexafluorophosphate are presented. The decomposition of the salts was monitored in situ by infrared and UV spectroscopy and hydrogen fluoride is credited as the true initiator of the cationic polymerisation of epoxides in an open system. The UV photolysis of the aforementioned onium salts led to the production of volatiles, resulting in the polymerisation of thin films of 3,4-epoxycyclohexylmethyl-31,41 - epoxycyclohexanecarboxylate, providing further evidence of hydrogen fluoride evolution. The use of FTIR- photoacoustic spectroscopy was proven to be an invaluable tool in monitoring the polymerisation of thin epoxide or acrylate films on an opaque substrate.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Khan, Niaz Ahmad. "Aspects of radiation curing." Thesis, City University London, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241483.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Rostami, Vahid. "Development of early carbonation curing to replace steam curing for precast dry-mix concrete." Thesis, McGill University, 2013. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=114470.

Повний текст джерела
Анотація:
Early carbonation curing technology was developed to replace steam curing for precast dry-mix concrete production. To facilitate carbon dioxide diffusion in concrete within 24-h after casting, presetting is necessary. It was accomplished by a short steam curing or by a controlled air curing. Carbonation was carried out after presetting at a gas pressure of 0.15 MPa and in a period of two hours. The performance of carbonated concretes was characterized by their carbon uptake, strength gain, pH values, calcium hydroxide content, permeability, sorptivity, freeze-thaw damage resistance and sulphate and acid resistance. It was found that the early carbonation curing could produce concrete with comparable strength by steam curing and lead to reduced calcium hydroxide on surface while maintaining pH higher than the corrosion threshold at the core. Carbonated concretes also exhibited improved resistance to sulphate attack, water absorption, and ion penetration. The early carbonation curing also demonstrated CO2 sequestration potential as an added value to the process. The microstructure of the cement paste subject to early carbonation was studied to understand the mechanism of early carbonation of concrete. Calcium carbonates produced by the process were integrated in calcium-silicate-hydrate while maintaining its initial silicate structure. The wetting procedure applied in subsequent hydration was essential to produce more hydration products in the carbonated zone and increase strength and durability. Both ordinary Portland cement (OPC) and Portland limestone cement (PLC) were investigated for their carbonation behaviour. PLC was found to be more CO2 reactive.
La technologie de cure par carbonatation précoce a été développée pour remplacer la cure par étuvage pour la production du béton mélange-à-sec préfabriqué. Afin de faciliter la diffusion du dioxyde de carbone dans le béton dans les 24 heures après le moulage, le préréglage est nécessaire. Ceci a été accompli par une cure par étuvage de courte durée ou par une cure par air contrôlé. Après le préréglage, la carbonatation a été effectuée à une pression de gaz de 0,15 MPa et dans une période de deux heures. La performance des bétons carbonatés a été caractérisée par leur absorption de carbone, le gain de résistance, les valeurs de pH, la teneur en hydroxyde de calcium, la perméabilité, la sorptivité, la résistance au gel-dégel ainsi qu'aux sulfates et à l'acide. Il a été constaté que la cure par carbonatation précoce pourrait produire du béton avec une résistance comparable à la cure par étuvage. Aussi, il a été noté que la carbonatation précoce pourrait résulter à une réduction de l'hydroxyde de calcium sur la surface tout en permettant le pH au coeur d'être supérieure à la valeur seuil de la corrosion. Des bétons carbonatés ont également présenté une résistance améliorée aux attaques des sulfates, à l'absorption de l'eau et à la pénétration des ions. En plus, la cure par carbonatation précoce a démontré le potentiel de séquestration du CO2 comme une valeur ajoutée au processus.La microstructure de la pâte de ciment soumise à la carbonatation précoce a été étudiée afin comprendre le mécanisme de carbonatation du béton. L'hydrate silicate de calcium (HSC) dans le ciment carbonaté était fortement intégré avec les carbonates de calcium tout en conservant sa structure silicatée initiale. La procédure de mouillage appliquée à l'hydratation ultérieure a été essentielle afin de produire plus de produits d'hydratation dans la zone carbonatée et d'augmenter la résistance et la durabilité. Le ciment Portland ordinaire (CPO) et le ciment Portland au calcaire (CPC) ont été étudiés pour comprendre leur comportement lors de la carbonatation. Le CPC est en mesure d'absorber plus de dioxyde de carbone et de produire une résistance plus élevée à un âge précoce.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Pheeraphan, Thanakorn. "Microwave curing of cementitious materials." Thesis, Massachusetts Institute of Technology, 1993. http://hdl.handle.net/1721.1/12174.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Bettelli, Mercedes Amelia. "Effect of Induction-Heat Post-Curing on Residual Stresses in Fast-Curing Carbon Fibre Reinforced Composites." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80527.

Повний текст джерела
Анотація:
Manufacturing induced shape distortions is a common problem for composite materials. Due to the non-isotropic nature of carbon fibre reinforced polymers (CFRP) unavoidable deformations occur during part production. During fabrication of polymer composites, the material obtains its final shape at elevated temperatures. The curing process involves a transition from the liquid state to the solid, glassy state, allowing bonding between fibres and matrix. As the material cools the mismatch in thermal expansion coefficients and cure shrinkage obtained during the matrix polymerization leads to residual stresses on the mechanical level within composite part. There is a great interest from the aircraft and automotive industries, to increase the ability to understand development of shape distortions and residual stresses during the cure, since these deformations often lead to dissatisfaction of tolerances and it is essential to predict the deformations beforehand in order to compensate time and cost.  In this context, a study of residual stresses during the curing process of thermosetting resin composites is presented. A methodology is proposed for predicting the formation and development of manufacturing- induced residual stresses. The present project reports on a comprehensive experimental study on the dependency of different short curing cycles on the build-up of residual stresses in a carbon fibre/fast-curing epoxy system and evaluate of post-curing methods through induction heating and oven post-curing with unidirectional [904] and unsymmetrical [9020] laminates. It includes characterization in thermo-elastic properties and degree-of-cure of the material by Thermal bending test, thermal expansion test, mechanical tensile test and Differential Scanning Calorimetry (DSC) in non-post-cured and post-cured laminates. The results showed slight variation in the thermal properties and not effect in the mechanical properties at different cure and post-curing conditions. Analytical data by Laminate Analysis program validated the experimental thermo-elastic data with analytical simulations. In addition, it is shown improvements in the temperature distributions in the post-curing by induction heating with different experimental set-ups, however, oven post-curing showed a more systematic system, higher heat efficient a low cure temperature, with more consistent mechanisms of shape distortions and residual stresses compared to induction heating. These findings are relevant for the future development of prediction methods for process induced deformations of Fast Curing Epoxy Resins (FCER).
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Bilyeu, Bryan. "Cure Kinetics and Processing Parameters of Neat and Reinforced High Performance Epoxy Resins: Evaluation of Techniques." Thesis, University of North Texas, 1999. https://digital.library.unt.edu/ark:/67531/metadc2281/.

Повний текст джерела
Анотація:
Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenyl methane (TGDDM), the tetrafunctional amine curing agent 4,4’-diaminodiphenylsulfone (DDS) and an ionic initiator/accelerator, are determined by various thermal analysis techniques and the results compared. The reaction is monitored by heat generated determined by differential scanning calorimetry (DSC). The changes in physical properties indicating increasing conversion are followed by shifts in glass transition temperature determined by DSC and temperature-modulated DSC (TMDSC), thermomechanical (TMA) and dynamic mechanical (DMA) analysis and thermally stimulated depolarization (TSD). Changes in viscosity, also indicative of degree of conversion, are monitored by DMA. Thermal stability as a function of degree of cure is monitored by thermogravimetric analysis (TGA). The parameters of the general kinetic equations, including activation energy and rate constant, are explained and used to compare results of various techniques. The utilities of the kinetic descriptions are demonstrated in the construction of a useful time-temperature-transformation (TTT) diagram for rapid determination of processing parameters in the processing of prepregs. Copyright is held by the author, unless otherwise noted. All rights reserved. Files: Thesis.pdf Special Conditions
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Wang, Jinsong. "Membrane curing and performance of concrete." Thesis, University of Dundee, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.257442.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Folz, Diane C. "Variable Frequency Microwave Curing of Polyurethane." Thesis, Virginia Tech, 2011. http://hdl.handle.net/10919/34567.

Повний текст джерела
Анотація:
Historically, coatings were processed from natural oils, fats, and resins; the first well-known and widely used being lacquer [Meir-Westhues, 2007]. In the 20th century, synthetic resins were developed to achieve coatings with improved properties. Of these coating compositions, polyurethanes (PURs) were one of the most prevalent. Polyurethanes became possible in 1937 when Otto Bayer developed the diisocyanate polyaddition process [Randall et al, 2002]. Since that time, literally thousands of PUR compositions have been used commercially. The primary application of interest in this study is that of coatings for wood substrates. It is well-known among materials researchers that there can be a number of differences between microwave and conventional materials treatment techniques [Clark et al, 1996], including enhanced reaction rates, lowered processing temperatures for some products, and selective interactions in composite systems. The primary goals of this research were to determine (1) whether microwave energy affected the cure rate in a water-based, aliphatic PUR, and (2) if there was an effect of microwave frequency on the cure rate. The primary tool for determining extent of cure in the PUR samples was Fourier transform infrared spectroscopy (FTIR). Using this characterization method, the changes in intensities of four bonds specific to the PUR composition were followed. It was determined that, in the particular PUR composition studied, microwave energy had an effect on the cure rate when compared with conventional heating, and that there was a frequency effect on the cure rate. Additionally, a deeper understanding of the use of FTIR spectroscopy techniques for studying cure kinetics was developed.
Master of Science
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Curing"

1

Lewis, Beverly. Curing hooks and slices: Straighten the curving shots. London: Tiger Books International, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Pappas, S. Peter, ed. Radiation Curing. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4899-0712-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Nishi, Makoto. Curing Lives. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1831-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

1956-, Wallace Mark I., and Smith Theophus Harold, eds. Curing violence. Sonoma, Calif: Polebridge Press, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Bussey, Linda. The curing machine. Leicester: De Montfort University, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Hills, Margaret. Curing arthritis cookbook. London: Sheldon, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Koleske, J. V. Cationic radiation curing. Blue Bell, PA (492 Norristown Rd., Blue Bell 19422): Federation of Societies for Coatings Technology, 1991.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Wells, Leslie. The curing season. New York: Warner Books, 2001.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Häberle, Thomas. Counselling and curing. London: Sheldon, 1987.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Massachusetts Continuing Legal Education, inc. (1982-), ed. Curing title defects. Boston, Mass. (44 School St., Boston 02108): Massachusetts Continuing Legal Education, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Curing"

1

Gooch, Jan W. "Curing." In Encyclopedic Dictionary of Polymers, 186. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3184.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Pearson, A. M., and T. A. Gillett. "Curing." In Processed Meats, 53–78. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4615-7685-3_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Gooch, Jan W. "Ultraviolet Curing (Or UV Curing)." In Encyclopedic Dictionary of Polymers, 779. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12311.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Gooch, Jan W. "Catalytic Curing." In Encyclopedic Dictionary of Polymers, 124. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2037.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Gooch, Jan W. "Cold-Curing." In Encyclopedic Dictionary of Polymers, 152. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2559.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Gooch, Jan W. "Curing Agent." In Encyclopedic Dictionary of Polymers, 187. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3200.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Gooch, Jan W. "Curing Temperature." In Encyclopedic Dictionary of Polymers, 187. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3203.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Gooch, Jan W. "Curing Time." In Encyclopedic Dictionary of Polymers, 187. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3204.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Bährle-Rapp, Marina. "light curing." In Springer Lexikon Kosmetik und Körperpflege, 322. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_6003.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Gooch, Jan W. "RF Curing." In Encyclopedic Dictionary of Polymers, 631. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_10017.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Curing"

1

Palanisamy, V., P. Annadurai, and S. Vijilakshmi. "Curbing and curing sybil attack in ad hoc network." In 2009 First International Conference on Advanced Computing (ICAC). IEEE, 2009. http://dx.doi.org/10.1109/icadvc.2009.5378276.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Gunion, Katherine, Todd Milford, and Ulrike Stege. "Curing recursion aversion." In the 14th annual ACM SIGCSE conference. New York, New York, USA: ACM Press, 2009. http://dx.doi.org/10.1145/1562877.1562919.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Dragojević, Aleksandar, Rachid Guerraoui, Anmol V. Singh, and Vasu Singh. "Preventing versus curing." In the 28th ACM symposium. New York, New York, USA: ACM Press, 2009. http://dx.doi.org/10.1145/1582716.1582725.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

"Curing of Concrete." In SP-104: Lewis H. Tuthill International Symposium: Concrete and Concrete Construction. American Concrete Institute, 1987. http://dx.doi.org/10.14359/1632.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zhang, Lulu, and Xi Wang. "Curing Behavior for Microencapsulated Curing Agents on Epoxy Resin Systems." In 5th International Conference on Civil Engineering and Transportation. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/iccet-15.2015.323.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ross, Peter A. "Induction curing of encapsulates." In 2007 Electrical Insulation Conference and Electrical Manufacturing Expo (EIC/EME). IEEE, 2007. http://dx.doi.org/10.1109/eeic.2007.4562645.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dwars, Sicco, Morten Lien, Søren Øydna, and Theresa Baumgartner. "Curing stick-slip: Eureka." In SPE/IADC International Drilling Conference and Exhibition. Society of Petroleum Engineers, 2019. http://dx.doi.org/10.2118/194108-ms.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Rodgers, Brendan. "Tire Curing Bladder Technology." In Technical Meeting of the Rubber Division, ACS. Akron, Ohio, USA: Rubber Division, ACS, 2022. http://dx.doi.org/10.52202/067657-0046.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gong, Min, and Dejian Zhou. "Effect of Curing Temperature and Curing Degree on Elastic Recovery of Conductive Particles." In 2015 Asia-Pacific Energy Equipment Engineering Research Conference. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/ap3er-15.2015.43.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Tingzhou, Ning, and Shoulin Hou. "Optimization of Biomass Curing Mold." In 2016 9th International Symposium on Computational Intelligence and Design (ISCID). IEEE, 2016. http://dx.doi.org/10.1109/iscid.2016.1018.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Curing"

1

Bentz, Dale P., and W. Jason Weiss. Internal curing :. Gaithersburg, MD: National Institute of Standards and Technology, 2011. http://dx.doi.org/10.6028/nist.ir.7765.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Meeks, Kenneth W., and Nicholas J. Carino. Curing of high-performance concrete:. Gaithersburg, MD: National Institute of Standards and Technology, 1999. http://dx.doi.org/10.6028/nist.ir.6295.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Carino, Nicholas J., and Kenneth W. Meeks. Curing of high-performance concrete:. Gaithersburg, MD: National Institute of Standards and Technology, 2001. http://dx.doi.org/10.6028/nist.ir.6505.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Pfeiffer, Donald, Stella Marusin, and J. Robert Landgren. Energy-Efficient Curing of Concrete. Precast/Prestressed Concrete Institute, 2022. http://dx.doi.org/10.15554/tr-1-82.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Dr. Arthur J. Ragauskas. Fast Curing of Composite Wood Products. Office of Scientific and Technical Information (OSTI), April 2006. http://dx.doi.org/10.2172/892708.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Yungwirth, Christian J., Eric D. Wetzel, and James M. Sands. Induction Curing of a Phase-Toughened Adhesive. Fort Belvoir, VA: Defense Technical Information Center, June 2003. http://dx.doi.org/10.21236/ada416397.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Janke, C. J., D. Wheeler, and C. Saunders. Electron beam curing of polymer matrix composites. Office of Scientific and Technical Information (OSTI), January 1998. http://dx.doi.org/10.2172/663226.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Karlicek, Robert, F. ,. Jr, and Robert Sargent. High Power UV LED Industrial Curing Systems. Office of Scientific and Technical Information (OSTI), May 2012. http://dx.doi.org/10.2172/1039941.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Riman, Richard, Yongqin Jiao, Daniel Kopp, Mimi Yung, and Hongyue Jin. Microbial Curing of Cement for Energy Applications. Office of Scientific and Technical Information (OSTI), March 2023. http://dx.doi.org/10.2172/1973693.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Gaines, George W., and Curtis D. Weyrauch. A New Generation of Visible-Light Curing Units. Fort Belvoir, VA: Defense Technical Information Center, December 1988. http://dx.doi.org/10.21236/ada208351.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Curing" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії